Due to high demand, the 1 liter this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Impart a perfect replication of barrel aromatics without the lengthy process of barrel ageing
Consistent, repeatable results every time without the need to blend various barrels of product together
Infuse oak aromatics into beer in minutes. Safe for use with low alcohol beers as there's no risk of infection that comes from barrel ageing beer below 12% ABV
Increase the perceived quality of your wine without drastically increasing production overhead or lead time
Eliminate the expensive, compounding loss of the "Angel's Share"—spirits typically lose 5-10% of their volume in barrels due to evaporation
2X Concentrate. This is a more concentrated extract than the standard Aroma Science extracts that requires approximately half the typical dosage
Complex and spiritous with grainy woody, creamy coconut, caramel, and fruity notes with subtle hints of smoke. Bold flavors of dark caramel, cinnamon, leather, and a touch of vanilla. More intense aromatics than the classic series. Use less.
Aroma Science's internationally-patented Evaporative Extraction™ technology naturally captures complex aromatics from wine and whiskey barrels to create aroma profiles that are perfect copies of the original barrel source. Use to balance and boost oak aroma in beer, wine, spirits, ciders, seltzers, and traditional, reduced proofed, and nonalcoholic ready-to-drink cocktails.
Typical recommended dosing in beer & wine is approximately 0.75-3 mL per gallon and anywhere from 2-30 mL per gallon with spirits. See AromaSciences.com for detailed dosing recommendations for Beer, Wine, and Spirits.
Ingredients: Ethanol, Water, Oak
Made in the USA
Reduless is a new product from Lallemand that was designed to correct negative VSCs (Voltatile Sulfur Compounds) such as H2S (hydrogen sulfide, A.K.A. "rotten egg") and DMS (dimethyl sulfide, A.K.A. "cooked corn") defects in wine. Made from inactivated yeast that have been infused with copper using a proprietary process, Reduless is a much gentler H2S remedy on the wine than the traditional copper sulfate (CuSO4) treatment alone. If you have an H2S problem, then we recommend treating it with Reduless first. However, if the sulfur problem still remains after the Reduless treatment, then a bench trial with copper sulfate (CuSO4) is recommended.
Note: The sooner you catch a sulfur problem the easier it is to deal with!
To Use:
Dissolve Reduless in 10 times it's weight in water and add immediately to the wine. Stir the wine gently to ensure a thorough homogenization. Rack or filter after 72 hours.
Recommended Dosage:
0.4-0.6 g/gal. The maximum amount of copper that can be released into the wine using Reduless at the recommended dosage is 0.02 ppm.
Impart a perfect replication of barrel aromatics without the lengthy process of barrel ageing
Consistent, repeatable results every time without the need to blend various barrels of product together
Infuse oak aromatics into beer in minutes. Safe for use with low alcohol beers as there's no risk of infection that comes from barrel ageing beer below 12% ABV
Increase the perceived quality of your wine without drastically increasing production overhead or lead time
Eliminate the expensive, compounding loss of the "Angel's Share"—spirits typically lose 5-10% of their volume in barrels due to evaporation
A perfect presentation of American oak. Coconut notes predominate with vanilla, sweet spices, nutmeg, and cloves. Seamless blend of flavors including vanilla, toffee, toasted nuts and rich caramel sweetness.
Aroma Science's internationally-patented Evaporative Extraction™ technology naturally captures complex aromatics from wine and whiskey barrels to create aroma profiles that are perfect copies of the original barrel source. Use to balance and boost oak aroma in beer, wine, spirits, ciders, seltzers, and traditional, reduced proofed, and nonalcoholic ready-to-drink cocktails.
Typical recommended dosing in beer & wine is approximately 1.5-6 mL per gallon and anywhere from 6-60 mL per gallon with spirits. See AromaSciences.com for detailed dosing recommendations for Beer, Wine, and Spirits.
Ingredients: Ethanol, Water, Oak
Made in the USA
Yeast Hulls are ususally the first action when you have a stuck or sluggish alcoholic or malolactic fermentation. Yeast Hulls are essentially dead yeast cells that absorb auto toxic yeast by-products that could be inhibiting your active yeast or ML culture from doing their job - finishing your fermentation! Yeast Hulls are then typically followed by Pro-Desert in the case of a stuck alcoholic fermentation or Acti Ml in the case of a stuck ML ferment.
As a side note, Yeast Hulls are included in the Fermaid K mix of nutrients to help prevent problem ferments from the onset. The reason you would not use Fermaid K for most stuck ferments is that Fermaid K contains DAP. If DAP (Diammonium Phosphate) is added to the ferment past the point of metabolization by the yeast it could potentially leave an unwanted, residual flavor. Use at the rate of .5 to .9 grams per gallon. If stored in a cool, dry place, will last up to 3 years.
A rough approximate of weight is 1 tsp = 2 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.
Due to high demand, the 10 kg is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Improves fermentation kinetics and aroma production
Allows yeast to be rehydrated in cool water (60°F) without any loss of viability or vitality
Eliminates the need for acclimatization steps—rehydrated yeast can be added directly to juice or must after 15 minutes
Requires 50% less water than Go-Ferm™ or Go-Ferm Protect Evolution™
Non-clumping, instantly disperses in cool water
Go-Ferm Sterol Flash™ is a revolutionary new yeast rehydration nutrient that is fast, simple to use, and saves time, labor, and water without compromising on yeast viability and vitality. Derived from autolyzed yeast, Go-Ferm Sterol Flash™ provides optimized levels of micronutrients (vitamins and minerals) and extremely high levels of survival factors including sterols and unsaturated fatty acids.
Go-Ferm Sterol Flash™ has the highest bioavailability of sterols and is produced with a specific Lallemand micro agglomerated process, for instant dispersion during the rehydration step. When suspended in cool water, the high content of sterols are quickly released and integrated in the yeast membrane within 15 minutes. The high content of sterols reinforces the permeability and fluidity of the yeast membrane. Go-Ferm Sterol Flash™ increases yeast viability, yeast vitality, and optimizes wine yeast aroma precursors assimilation under any conditions in red, rose, and white wine fermentation. With Go-Ferm Sterol Flash™, no yeast acclimatization steps are required before inoculation in must. Go-Ferm Sterol Flash™ is a revolutionary yeast rehydration protector with instant dispersion in cool water for a more reliable alcoholic fermentation and wine yeast sensory impact.
Use:
Use at a rate of 1.25 g Go-Ferm Protect per 1 g of yeast.
A rough approximate of weight is 1 tsp = 3.2 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.
Click Here for a copy of MoreWine!'s Guide to Yeast Rehydration
Store in a cool and dry environment at 65°F. Once opened, keep tightly sealed and dry.
Wine Conditioner is a combination sugar/sorbate solution for adding to a fermented wine in order to give it some residual sweetness. The sorbate helps prevent fermentation of the sugar that you are adding. Solution is 76-78° Brix.
Directions: Add to taste, usually up to 125ml (4 oz) per 23L (5 gal) of wine. Wine must be stabilized before adding sweetener.
Wine Making
Use Delvozyme (Lysozyme, Lysovin) for controlling lactic acid bacteria growth in your wine. Isolated from egg whites, this enzyme will degrade the cell wall of gram positive bacteria, but will not affect yeast or gram negative bacteria such as Acetobacter. Delvozyme can be used for both Red and White Wine Malo Fermentation.
Dosage:
To Delay Malolactic Fermentation: Red Wine - add to grapes at 100 - 200 ppm, or 0.38 - 0.76 grams per gallon. White Wine - Add to must at 200 - 300 ppm, or 0.76 - 1.14 grams per gallon.
To Block Malolactic Fermentation: White Wine - Add to must or wine at 300 - 500 ppm, or 1.14 - 1.90 grams per gallon.
Stabilizing wine after MLF is complete: Add to barrel during storage at 250 - 500 ppm, or 0.95 - 1.90 grams per gallon.
When blending partial and complete MLF wines: Add immeditatley after blending at 300 - 500 ppm, or 1.14 - 1.90 grams per gallon, to reduce the risk of further malolactic fermentation (MLF). Within several days any lactic should expire.
For sluggish or stuck yeast fermentation: Red Wine - Add at 150 - 400 ppm, or 0.57 - 1.52 grams per gallon. White Wine - add at 300 - 500 ppm, or 1.14 - 1.90 grams per gallon.
Directions for use: You can make a 10% solution of Delvozyme in water (100 grams per liter of water). However we find the easiest method is to add the desired dry weight of Lysovin in 5x its weight of warm(tepid) water. Mix for one minute, allow this mixture to stand for 45 minutes and add to must, juice or wine while mixing well. Allow 24 - 48 hours for reaction to complete.
**Note: 3tsp Delvozyme = 5g
Beer Making
Delvozyme can be used in beer making as well. Use either in the starter (recommended if you make starters) or when pitching (adding) the yeast to the wort, do not use over 140 F. Recommended dosages is 1 tsp per 5 gallons of wort. According to studies it has no effect on flavor or clarity.
Storage: Should be stored at room temperatures in a dry environment, can be stored up to 5 years.
Impart a perfect replication of barrel aromatics without the lengthy process of barrel aging
Consistent, repeatable results every time without the need to blend various barrels of product together
Infuse oak aromatics into beer in minutes. Safe for use with low alcohol beers as there's no risk of infection that comes from barrel aging beer below 12% ABV
Increase the perceived quality of your wine without drastically increasing cost or production time
Eliminate the expensive, compounding loss of the "Angel's Share"—spirits typically lose 5-10% of their volume in barrels due to evaporation
French Oak extract is subtle and complex with exotic savory spice and hints of dark chocolate and roasted coffee. Mellow spice notes with a smooth mocha and toffee finish.
Aroma Science's internationally-patented Evaporative Extraction™ technology naturally captures complex aromatics from wine and whiskey barrels to create aroma profiles that are perfect copies of the original barrel source. Use to balance and boost oak aroma in beer, wine, spirits, ciders, seltzers, and traditional, reduced proofed, and nonalcoholic ready-to-drink cocktails.
Typical recommended dosing in beer & wine is approximately 1.5-6 mL per gallon and anywhere from 6-60 mL per gallon with spirits. See AromaSciences.com for detailed dosing recommendations for Beer, Wine, and Spirits.
Ingredients: Ethanol, Water, Oak
Made in the USA
This product replaces our TAN140 - Tannin Plus
Enological tannins offer the winemaker the possibility to add refined, highly-bindable tannin to your wine at any stage during the process. Benefits can include increased structure and mouthfeel, color stabilization, stability, anti-oxidative qualities, and overall complexity. Tannins can reduce vegetal/herbaceous characteristics and perceived astringency. We offer four types of oenolgical tannins, two for use during fermentation, and two for use during the aging phase.
Aging Tannins
Tannin Riche Extra is a preparation of 100% American oak tannin that has been lightly toasted to impart a soft, aromatic character while enhancing the structure and organoleptic complexity of a wine. Tannin Riche Extra is a great tool for imparting hints of coconut, a heightened vanillin oak character and a smooth finish to your wines. Although designed for fine-tuning a wine, Tannin Riche Extra still maintains the regular properties associated with the use of tannins such as helping with clarification, stability, oxidation, and aging. Works well in conjunction with low doses of other tannins (i.e: Tannin Complex & FT Blanc Soft).
To Use:
Dissolve the tannin in 10 times its weight in warm water (95F/35C). Add to the wine during a punch-down or pump-over for good mixing. Addition of Tannin Plus should be made a minimum of three weeks before bottling.
Recommended dosage:
0.2-0.4 g/gal
A rough approximate of weight is 3/4 tsp = 1 gram. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.
Xoakers are 1" Solid Oak spheres made from high quality French oak and seasoned for a minimum of 24 months. They will contribute a complex oak character while softening and rounding the wine as well. What sets these apart though, are their shape and ease of use. The uniform size allows for precise dosing, and easy removal once complete. Whether you are using carboys or neutral barrels, additions are as simple as counting out however many Xoakers you need, and tossing them in. Every vessel will be oaked to the same extent when using these, and no need to weigh them out!
Removing them is as simple as turning over your carboy or barrel, and watching them roll out! These can be used in both red and white wines, and are perfect for carboys, barrels, small tanks, and kegs. Ideal oak for the home winemaker! These Convection Toasted Medium Plus French Oak Xoakers are packed in Mylar bags, and will contribute various flavors depending on the wine.
The 8 pack will treat 4-8 gallons & 1 lb will treat 35-70 gallons.
Dosage: 1-2 Xoakers / Gallon (3.78 L) wine (depends on desired Oak Impact)
Contact Time: 4 Month Minimum Recommended
Useful Life in Wine: 12 Months
Size: 1" Diameter Spheres, 70 French Oak Xoakers / lb
Liquid Displacement: .10 gal (.41 L)
Toast Level: Med +
Enhances clarification and static settling of white and rosé musts under extreme conditions
Active and fast depectinisation at low temperature, low pH, or high total pectin content
Produces rapid, compact lees and improves juice quality consistently
Requires lower dosage for effective results compared to standard enzymes
Cinnamyl-esterase-free pectinase blend minimizes ethylphenol precursor release
Lallzyme C-MAX™ is a micro-granulated pectolytic enzyme derived from Aspergillus niger, formulated for use in white and rosé wine production where settling conditions may be difficult. With high activities of pectin lyase, pectin methyl esterase, and polygalacturonase, it provides fast, efficient breakdown of pectin, even at low temperatures (as low as 8 °C / 46 °F) or low pH. Its action reduces must viscosity, speeds up clarification, and generates compact, easy-to-rack lees. Because it contains no cinnamyl esterase, Lallzyme C-MAX™ also limits the formation of ethylphenol precursors, contributing to cleaner, more varietally expressive wines.
Protocol for Use:
Add after pressing or directly into the settling tank. Dilute the enzyme in 10 times its weight in water or juice before use. Mix thoroughly for uniform distribution. Do not add bentonite during enzyme treatment. Clarification typically completes within 24 hours depending on temperature and juice conditions.
Usage Rates:
Standard conditions (>12 °C / 54 °F): 0.5–1.0 g/hL = 0.005–0.01 g/L = 0.019–0.038 g/gal
Cold or high-pectin conditions (8–12 °C / 46–54 °F): 1.0–2.0 g/hL = 0.01–0.02 g/L = 0.038–0.076 g/gal
Store in original sealed packaging at 5–15 °C (41–59 °F) in a dry place. Suitable for organic and vegan wine production.
WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Medium toast French Oak staves, and depending on the wine, will impart flavors of vanilla and coffee, while clearing out negative vegetal flavors and astringency from the wine. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal!
One carboy Winestix will treat 5-6 gallons of wine.
Premium, Fire-Toasted Oak Cubes from Stavin
Heavy Toast French Oak will impart flavors of campfire, char & roasted coffee, with hints of vanilla, cinnamon and chocolate.
These fire-toasted oak cubes are as close as you can come to the full range of flavors you would get from aging your beer in a full sized barrel, unlike convection-toased cubes.
The difference is that convection toasted cubes are made by cutting the stave to size, then passing the small cubes through a toasting chamber. Stavin fire-toasts their staves whole, just like they would when making a barrel, and then cuts them down to size. The result is a gradation of toasting from the surface through to the center of the cube, where each different toast level represents a different flavor set that the oak will give your beer. The result is a much more complex and natural profile; by comparison convection toasted cubes taste one dimensional.
Oak cubes also release their flavor into your beer more slowly than chips, giving you more control over the final degree of impact in your beer. You should plan on an extended aging period of 1-6 months when using cubes. This longer contact time again promotes flavor complexity by allowing all the flavors of the oak and your beer to marry.
Recommended Dosage is 2 oz per 5 gallons for impact equivalent to aging in a brand new oak barrel.
Oak Infusion Tubes for Carboys are an easy way to add oak, dry hops, or an other adjunct flavor to your beer.
This stainless steel, perforated tube will hold 2 ounces of oak chips or cubes, or 3 ounces of pellet hops. It is lowered into the carboy by a small plastic line at the top of the infusion tube. This keeps the tube suspended in the beer while still allowing the carboy stopper to seal tightly. When it’s time to remove it, grab ahold of the line, remove the stopper, and pull the Infusion Tube out!
Made from stainless steel with silicone stoppers at both ends. 16" long. Fits carboys 5 gallons and up.
Scottzyme PEC5L – Pectinase Enzyme for Enhanced Settling and Juice Yield
Rapidly breaks down soluble pectins for faster settling and improved clarity
Increases free-run and press yield by reducing viscosity and cell wall resistance
Improves flotation efficiency and tightens lees compaction
Effective across a wide pH range and performs well at low temperatures
Ideal for white, rosé, and fruit wines requiring fast clarification and clean separation
Scottzyme PEC5L is a highly active liquid pectinase enzyme formulated to reduce pectin-related haze and increase processing efficiency in juice production. By breaking down soluble pectins, PEC5L dramatically improves juice release during pressing, reduces must viscosity, and accelerates settling or flotation. The result is clearer juice, more compact lees, and higher overall yield. Its formulation is optimized for cool-temperature performance and a broad pH range, making it a versatile tool in grape and non-grape juice clarification. Unlike general pectinases, PEC5L is designed to act quickly and cleanly, without over-extraction of phenolics or bitterness.
Protocol
Dilute Scottzyme PEC5L in 10 times its volume of chlorine-free water or juice. Add to must or juice immediately after crushing or during transfer to settling tank. Mix well to ensure even distribution. For flotation, add just before or during the flotation process. Avoid adding at the same time as SO₂ or bentonite.
Usage Rates
Recommended dosage: 1.5–4.0 mL per 1000 lb of fruit or 0.075–0.2 mL per gallon of juice
= approximately 0.02–0.05 mL per liter
Use lower rates for clean, low-pectin fruit or warmer temperatures. Use higher rates for pectin-rich grapes, low temperatures, or difficult-to-settle musts. Allow contact time of 2 to 12 hours depending on conditions and desired level of clarification.
WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Medium Plus toast North American Oak staves, and depending on the wine, will impart flavors of roasted coffee, spice, nutmeg, honey, light chocolate, and hints of leather. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal!
1" W x 8.5" Long
One carboy Winestix will treat 5-6 gallons of wine.
WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Light toast French Oak staves, and depending on the wine, will impart flavors of gentle spices, cloves, cinnamon, vanilla, along with some rounding and structuring of the wine. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal!
One carboy Winestix will treat 5-6 gallons of wine.
Xoakers are 1" Solid Oak spheres made from American Oak and seasoned for a minimum of 36 months. They will contribute a complex oak character while softening and rounding the wine as well. What sets these apart though, are their shape and ease of use. The uniform size allows for precise dosing, and easy removal once complete. Whether you are using carboys or neutral barrels, additions are as simple as counting out however many Xoakers you need, and tossing them in. Every vessel will be oaked to the same extent when using these, and no need to weigh them out!
Removing them is as simple as turning over your carboy or barrel, and watching them roll out! These can be used in both red and white wines, and are perfect for carboys, barrels, small tanks, and kegs. Ideal oak for the home winemaker! These Convection Toasted Medium Plus American Oak Xoakers are packed in Mylar bags, and will contribute various flavors depending on the wine.
The 8 pack will treat 4-8 gallons & 1 lb will treat 30-60 gallons.
Dosage: 1-2 Xoakers / Gallon (3.78 L) wine (depends on desired Oak Impact)
Contact Time: 4 Month Minimum Recommended
Useful Life in Wine: 12 Months
Size: 1" Diameter Spheres, 60 American Oak Xoakers / lb
Liquid Displacement: .09 gal (.35 L)
Toast Level: Med +
WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Light toast North American Oak staves, and depending on the wine, will impart flavors of light vanillin, almonds, coconut, and fresh oak. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal!
One carboy Winestix will treat 5-6 gallons of wine.
Some homewinemakers will treat wine affected with Hydrogen Sulfide (rotten egg smell) by stirring with a copper rod or racking through a copper "scrubby". Copper converts the the hydrogen sulfide into copper sulfide, which is not soluble in wine. After a few days the wine is racked off the copper sulfide which by that time has precipitated down to the bottom of your vessel. However, putting wine in direct contact with a non-measured amount of copper can result in residual copper being left in your wine, especially in low pH environments.
A more professional approach to the reduciton of Hydrogen Sulfide is to use a measured amount of copper sulfate in a 1% solution. Normally a trial is set up to determine the least amount needed to eliminate the problem (see FIN84 bench trial kit). Because the amounts used are very small, it will be necessary to use a pipette.
Add the correct amount of copper sulphate in small .1 ppm doses. Wait several days for the copper sulfide to settle out and then rack off the lees. Do not add copper sulphate during an active fermentation as it may actually cause more hydrogen sulfide to form. If you detect hydrongen sulfide or "rotten egg" smell during fermentation, it is a sign of poor yeast nutrition. Add the recommended amount of Fermaid K (AD345) for the amount of yeast you used to correct this issue - it should keep you from having to use the copper later!
WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Medium Plus toast French Oak staves, and depending on the wine, will impart roasted toasty aromas, with flavors of coffee and caramel sweetness the length of the palate. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal!
1" W x 8.5" Long
One carboy Winestix will treat 5-6 gallons of wine.
cottzyme KS – High-Power Enzyme for Complex Pectin Breakdown in Red, White, and Problem Wines
Breaks down complex, highly esterified pectins that standard pectinases cannot
Enhances clarification, settling, and filterability in challenging juices and wines
Boosts juice and wine yield by improving extraction from thick-skinned or high-pectin fruit
Ideal for problem fermentations or hazy wines that resist fining and filtration
Performs well at low temperatures and in a broad pH range
Scottzyme KS is a specialized pectolytic enzyme designed to break down complex pectin structures found in high-pectin varietals and difficult ferments. While standard enzymes like PEC5L target simple soluble pectins, KS is formulated with enhanced side-chain cleaving activity that attacks esterified pectins and heavily branched structures. This makes it particularly effective on cultivars like Pinot Gris, Riesling, Gewürztraminer, Muscat, and in juice or wine where haze persists despite prior enzymatic treatment. KS improves clarification, tightens lees, increases press and wine yields, and boosts filtration efficiency—especially in wines that defy typical settling protocols.
Comparison to Scottzyme PEC5L:
Scottzyme PEC5L is a fast-acting general-purpose pectinase for typical clarification tasks, such as settling and flotation of white and rosé juices. It’s ideal for clean juice production from standard grapes and most fruit wines. In contrast, KS is the go-to choice when PEC5L isn’t enough—it’s stronger on stubborn, esterified pectins and delivers better results with problematic varieties or ferments that remain hazy even after PEC5L. While PEC5L is excellent for fast juice prep, KS excels in the most difficult cases, including post-fermentation haze and challenging press fractions.
Protocol
Dilute Scottzyme KS in 10 times its volume of chlorine-free water or juice. Add to must, juice, or wine and mix well. Suitable for use before or after fermentation. Do not add simultaneously with bentonite or high SO₂. Works effectively at 10–20°C.
Usage Rates
Recommended dosage: 1.5–4.0 mL per 1000 lb of fruit or 0.075–0.2 mL per gallon
= approximately 0.02–0.05 mL per liter
Use lower rates for moderate haze and extended contact time. Use higher rates in cold settling, high-pectin juices, or persistent post-fermentation hazes. Allow 4–24 hours of contact time depending on application.
Enological tannins offer the winemaker the possibility to add refined, highly-bindable tannin to your wine at any stage during the process. Benefits can include increased structure and mouthfeel, color stabilization, stability, anti-oxidative qualities, and overall complexity. Tannins can reduce vegetal/herbaceous characteristics and perceived astringency.
New Liquid Oak Tannins produced by Toasted Oak Inc. are water based, French Oak Tannin concentrates, designed to easily integrate smooth and flavorful oak character into a wine, without the cost or hassle of traditional oak barrels. While powdered tannins are similarly cost effective, there will be some loss of flavor and texture due to the high temperatures necessary to evaporate all liquid out. Liquid Oak Tannins are the perfect balance of oak barrel flavor, and pure tannin cost.
Aside from the beneficial flavor impact of these products, they are also easier to add to the wine and assure even dilution. These Liquid Oak Tannins are for red and white wines. Please do bench trials carefully when considering their use in white wines. Additions may cause filterability(and stability) changes. Do not exceed 30% of normal red wine dosing for white wines.
Fruit Enhancer Plus has more proanthocyanidic tannin components to emphasize a ripe berry character and a fruity, aromatic style. It has to be carefully dosed as it will have a strong influence on the existing character of the wine. Works best on red wine to accentuate a ripe berry character (Black Cherry character).
A 4 oz bottle of Fruit Enhancer Plus will treat 125 gallons of wine with a low dosage, or 47 gallons at a high dosage. Please see the Documents tab above for additional information as well as Bench Trial procedure.
Impart a perfect replication of barrel aromatics without the lengthy process of barrel ageing
Consistent, repeatable results every time without the need to blend various barrels of product together
Infuse oak aromatics into beer in minutes. Safe for use with low alcohol beers as there's no risk of infection that comes from barrel ageing beer below 12% ABV
Increase the perceived quality of your wine without drastically increasing production overhead or lead time
Eliminate the expensive, compounding loss of the "Angel's Share"—spirits typically lose 5-10% of their volume in barrels due to evaporation
2X Concentrate. This is a more concentrated extract than the standard Aroma Science extracts that requires approximately half the typical dosage
Sweet and floral with fresh and dried fruit notes and hints of citrus zest. Smooth, sweet flavor with notes of baking spice and a touch of vanilla. More intense aromatics than the classic series. Use less.
Aroma Science's internationally-patented Evaporative Extraction™ technology naturally captures complex aromatics from wine and whiskey barrels to create aroma profiles that are perfect copies of the original barrel source. Use to balance and boost oak aroma in beer, wine, spirits, ciders, seltzers, and traditional, reduced proofed, and nonalcoholic ready-to-drink cocktails.
Typical recommended dosing in beer & wine is approximately 0.75-3 mL per gallon and anywhere from 2-30 mL per gallon with spirits. See AromaSciences.com for detailed dosing recommendations for Beer, Wine, and Spirits.
Ingredients: Ethanol, Water, Oak
Made in the USA
Impart a perfect replication of barrel aromatics without the lengthy process of barrel ageing
Consistent, repeatable results every time without the need to blend various barrels of product together
Infuse oak aromatics into beer in minutes. Safe for use with low alcohol beers as there's no risk of infection that comes from barrel ageing beer below 12% ABV
Increase the perceived quality of your wine without drastically increasing production overhead or lead time
Eliminate the expensive, compounding loss of the "Angel's Share"—spirits typically lose 5-10% of their volume in barrels due to evaporation
2X Concentrate. This is a more concentrated extract than the standard Aroma Science extracts that requires approximately half the typical dosage
Rum notes predominate with creamy sweet caramel and fruity notes with coconut and sweet spice. More intense aromatics than the classic series. Use less.
Aroma Science's internationally-patented Evaporative Extraction™ technology naturally captures complex aromatics from wine and whiskey barrels to create aroma profiles that are perfect copies of the original barrel source. Use to balance and boost oak aroma in beer, wine, spirits, ciders, seltzers, and traditional, reduced proofed, and nonalcoholic ready-to-drink cocktails.
Typical recommended dosing in beer & wine is approximately 0.75-3 mL per gallon and anywhere from 2-30 mL per gallon with spirits. See AromaSciences.com for detailed dosing recommendations for Beer, Wine, and Spirits.
Ingredients: Ethanol, Water, Oak
Made in the USA
Kupzit® is an innovative copper citrate preparation developed for the elimination of sulfide off-flavors, particularly hydrogen sulfide odors in wine and fruit wine. Kupzit® contains 2 % copper citrate. For easy dosage and handling, it is coated onto a mineral carrier material, a particularly pure, high-quality granulated bentonite.
Kupzit® reacts within minutes with sulphur compounds such as hydrogen sulfide and mercaptans. These compounds bind with Kupzit and then settle out to the bottom.
Dosage and Application:
Trials are absolutely recommended. Generally, the dosage amount is 5-20 g/100 L or .05-.2 g/L. Exceptionally bad cases may require up to twice as much.
See the attached Manufacturer's instructions for further details along with information on dosage and storage.
Scottzyme HC is a blend of assorted enzymes designed to increase yield in apple, pear, stone fruits, and wetter grapes (such as concords). This enzyme will assist in breaking down the fruit you work with to help extract more flavor and juice, as well as improving filterability and overall clarity. This Scottzyme works best in conjunction with PEC5L.
WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Dark toast North American Oak staves, and depending on the wine, will impart flavors of toasted oak, dark chocolate, subtle black pepper, and carmelized characters. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal!
One carboy Winestix will treat 5-6 gallons of wine.
Lallzyme Cuvee Blanc – Enzyme for Aroma Release and Finesse in White and Sparkling Wines
Enhances aroma expression by unlocking bound terpene and thiol precursors
Improves clarification and filterability through efficient pectin breakdown
Increases finesse and texture by gently releasing polysaccharides
Ideal for varietal whites and sparkling base wines where delicacy is key
Balanced glycosidase activity preserves freshness without compromising stability
Lallzyme Cuvee Blanc is a highly specific enzyme developed by Lallemand for the production of elegant, aromatic white and sparkling wines. It offers a delicate balance of pectinase and glycosidase activity that breaks down grape cell walls to improve clarification while simultaneously releasing aroma precursors trapped in glycosidic form. This selective activity enhances varietal expression—especially in terpene- and thiol-rich varieties—without producing off-flavors or excessive bitterness. The result is a wine with lifted aromatics, better mouthfeel, and improved stability, ideal for styles requiring precision and finesse.
Protocol
Dilute Lallzyme Cuvee Blanc in 10 times its weight of chlorine-free water. Add to juice or wine at the preferred stage—either pre-fermentation for aroma release and settling, or post-fermentation for finishing and clarification. Ensure even distribution by mixing thoroughly. Optimal temperature range is 12–20°C. Avoid use below 10°C or in combination with bentonite or SO₂ during addition.
Usage Rates
Recommended dosage: 2–4 grams per hectoliter
= 0.02–0.04 grams per liter
= 0.076–0.151 grams per gallon
Use 2 g/hL for lighter aromatics or wines already showing good varietal character. Increase to 4 g/hL in more neutral juices or when maximizing aromatic potential is desired. Allow adequate contact time—typically 24 to 48 hours—depending on the winemaking stage and style.
WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Medium toast North American Oak staves, and depending on the wine, will impart flavors of roasted nuts, hints of spice, cinnamon, and vanilla. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal!
One carboy Winestix will treat 5-6 gallons of wine.
WineStix are a new form of oak integration for wine, designed to give new barrel flavors with an extraction time similar to cubes. The combination of Short and Long grains result in amazing gradience of flavor similar to barrels, while extracting significantly quicker! These are Dark toast French Oak staves, and depending on the wine, will impart flavors of dark coffee, some carmelized sweetness, and a roasty smokey character that will compliment big blockbuster varietals. This is a two pack of WineStix, sized specifically for a 5-6 gallon carboy of wine. WineStix will easily fit through the mouth of a glass carboy, and can be attached to a string via the drilled hole for easy removal!
One carboy Winestix will treat 5-6 gallons of wine.
Enological tannins offer the winemaker the possibility to add refined, highly-bindable tannin to your wine at any stage during the process. Benefits can include increased structure and mouthfeel, color stabilization, stability, anti-oxidative qualities, and overall complexity. Tannins can reduce vegetal/herbaceous characteristics and perceived astringency.
New Liquid Oak Tannins produced by Toasted Oak Inc. are water based, French Oak Tannin concentrates, designed to easily integrate smooth and flavorful oak character into a wine, without the cost or hassle of traditional oak barrels. While powdered tannins are similarly cost effective, there will be some loss of flavor and texture due to the high temperatures necessary to evaporate all liquid out. Liquid Oak Tannins are the perfect balance of oak barrel flavor, and pure tannin cost.
Aside from the beneficial flavor impact of these products, they are also easier to add to the wine and assure even dilution. These Liquid Oak Tannins are for red and white wines. Please do bench trials carefully when considering their use in white wines. Additions may cause filterability(and stability) changes. Do not exceed 30% of normal red wine dosing for white wines.
Mocha has 10 g of tannin / liter of concentrate. It brings out the character of a heavy toast barrel, slightly smoky with chocolate-coffee undertones
A 4 oz bottle of Mocha Liquid Tannin will treat 47 gallons of wine with a low dosage, or 32 gallons at a high dosage. Please see the Documents tab above for additional information as well as Bench Trial procedure.
Oak Cubes allow for a more controlled and gradual infusion of flavors into your beverage during the aging process
Cubes offer a more rapid oak infusion than full barrels due to their increased surface area relative to their volume
Medium Plus toast imparts flavors of vanilla, mocha, toffee, spice, and butterscotch
Ideal for long-term aging
Oak cubes provide a nuanced and gradual release of their aromatic compounds, allowing for precise control over the development of your beverage's flavor. Their generous surface area promotes a deliberate and harmonious aging process, fostering the emergence of intricate flavors and enticing aromas over time.
Medium Plus toast imparts flavors of vanilla, mocha, toffee, spice, and butterscotch.
Oak Chips Inc. (OCI) specializes in providing premium oak alternatives, such as chips, cubes, and staves, for enhancing the flavor and aging process of wine, spirits, and beer. They source their oak from sustainable forests and offer various toast levels to help beverage makers achieve desired flavor profiles.
Vit End – Lallemand Yeast Nutrient for Securing Fermentation Completion
Supports yeast vitality during the final stages of alcoholic fermentation
Provides essential vitamins, minerals, and survival factors to avoid sluggish finishes
Reduces the risk of stuck fermentation by reactivating stressed or nutrient-starved yeast
Enhances sugar-to-ethanol conversion efficiency for cleaner fermentation ends
More targeted than general nutrients due to its late-fermentation formulation
Vit End is a specialized nutrient developed by Lallemand for use at the end of alcoholic fermentation, when yeast cells are most vulnerable to nutrient depletion, ethanol toxicity, and osmotic stress. Unlike standard yeast nutrients formulated for the growth phase, Vit End is designed to support cell survival, membrane integrity, and residual sugar metabolism. It contains inactivated yeast rich in survival factors, specific vitamins, minerals, and sterols that help re-energize exhausted yeast populations, allowing them to finish fermentation smoothly. Wines showing signs of slowing kinetics, high residual sugar, or difficult fermentation conditions benefit from the targeted support Vit End provides.
Protocol
Suspend Vit End in ten times its weight of clean must or wine at 20–25°C. Stir thoroughly to dissolve. Add when fermentation is slowing (often near 0–5°Brix) or when signs of yeast stress appear. Mix well to ensure even distribution. Do not add simultaneously with bentonite or sulfites.
Usage Rates
Recommended dosage: 20–40 grams per hectoliter
= 0.2–0.4 grams per liter
= 0.76–1.5 grams per gallon
Use 20 g/hL in moderate stress conditions. Increase to 40 g/hL in fermentations that are near-stuck, have high residual sugar, or show signs of yeast stress. Vit End can also be used proactively in fermentations known to be high-risk due to low YAN, high sugar, or challenging varietals.
Impart a perfect replication of barrel aromatics without the lengthy process of barrel ageing
Consistent, repeatable results every time without the need to blend various barrels of product together
Infuse oak aromatics into beer in minutes. Safe for use with low alcohol beers as there's no risk of infection that comes from barrel ageing beer below 12% ABV
Increase the perceived quality of your wine without drastically increasing production overhead or lead time
Eliminate the expensive, compounding loss of the "Angel's Share"—spirits typically lose 5-10% of their volume in barrels due to evaporation
Made with amburana barrels that contained Cachaca, a traditional Brazilian sugarcane spirit. Highly aromatic, exotic, and completely unique! A warm and seductive blend of vanilla, almond and backing spice, with notes of cinnamon, maple syrup, caramel, and butterscotch.
Like cinnamon, amburana contain coumarin. Do not use more than 5,000 parts per million in beverages.
Aroma Science's internationally-patented Evaporative Extraction™ technology naturally captures complex aromatics from wine and whiskey barrels to create aroma profiles that are perfect copies of the original barrel source. Use to balance and boost oak aroma in beer, wine, spirits, ciders, seltzers, and traditional, reduced proofed, and nonalcoholic ready-to-drink cocktails.
Typical recommended dosing in beer & wine is approximately 1.5-6 mL per gallon and anywhere from 6-60 mL per gallon with spirits. See AromaSciences.com for detailed dosing recommendations for Beer, Wine, and Spirits.
Ingredients: Ethanol, Water, Amburana
Made in the USA
If you are looking for oak that produces flavors which are closer to true barrel quality, then these Stave Segments are just right for you. Less end-grain than traditional oak cube means a slower extraction time and a longer contact time, which will lead to a softer, more rounded mouthfeel. Many professional winemakers who have used these segments have said the flavors produced seemed more like those from regular staves in a barrel. The recommended ratio for 100% new barrel flavor is about .5 lb per 5 gallons of wine. Since the exraction is so slow, the minimum contact time is 16 weeks and they can be left on the wine for up to 18 months. Too large for carboys, please check out oak cubes or chips if using a carboy.
