Keep your beer on tap at-home pouring at its highest potential with beer faucets & parts from MoreBeer! These small yet important parts help to create a seal between the faucet and the shank, lock the faucet and even create friction when opening and closing the faucet. From beer faucets, to bonnets, to body gaskets, MoreBeer! carries all of the beer tap parts you’ll need to maintain the performance of your faucet.
Get all of the amazing features and functionality out of your Intertap faucet! This kit includes all of the accessories that can be paired with the Stainless Steel Intertap forward sealing faucet. Whether you want to fill a growler or pour a stout, this faucet does it all. Everything you need to dispense from and maintain your Intertap faucet! This Kit Includes: Stainless Steel Intertap Beer Faucet (D1210) Intertap Stout Spout (D1213) Intertap Growler Filler Spout (D1214) Intertap Ball Lock Spout (D1217) Intertap Self-Closing Faucet Spring* (D1212) Intertap Seal & Gasket Kit (D1215) *Does not include shank.
$71.99
Comes with a back nut, plastic collar, hex nut, and 8 mm Duotight Adapter compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Requires a 1" hole saw for installation. When set in place, the shank will only have about 4-1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 7-1/8" - Total Length (Tip to Tip) 6" - Shank Length (Without Nut & Barb) 5" - Thread Length 4-1/2" - Pass Through Length Kegland Part number: KL11952
$39.99
Fix your old, stuck, or leaky faucet with new washers! Most faucets that aren't working properly, just need a good cleaning and some new washers Fits most American beer faucets, including D1200, D1205, D1207, and D1215 Does not work on stout, forward sealing, or European faucets Fix an old faucet that is still functionally sound but is old, leaking or just hard to use. Fits our faucets D1200, D1205,D1207, & D1215 and 95% of all beer faucets ever made. Does not work on stout faucets, the sealed forward faucets, Perlick faucets, nor European faucets.
$3.49
This is a replacement faucet spout for the Intertap style beer faucets. This is the standard stainless steel spout, but will fit all Intertap faucets.
$6.59
Replace a missing or damaged gas-in check valve on your Sanke Coupler. This one way gas bladder prevents beer from back-flowing up your gas line and into your regulator where it could cause damage. Comes in a convenient zip lock bag.
$14.49
This dual sided screw has one side which goes into a Faucet Tap Ferrule and the other is a wood screw to go into a wooden tap handle. Perfect for creating your own custom handles. 5/16-18 thread. Comes in a convenient zip lock bag.
$8.29
Compatible with either your sanke keg coupler or draft shank and held in place with a hex nut & gasket. This 5/16 in. tailpiece is commonly used with 1/4 in. ID draft tubing for a tight fit. Comes in a convenient zip lock bag.
$12.49
The famous forward-sealing Perlick beer faucet, with integrated Flow Control valve and Push-Back Creamer! Use the flow control feature to reduce unwanted foaming during the length of the pour, then finish it off with the push-back creamer to top off the beer with the perfect amount of foam. Get ready to start pouring picuture-perfect pints with the Perlick 690SS! Constructed of 304 stainless steel to last a lifetime. About Perlick Forward Sealing Beer Faucets: The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? An ordinary, rear-sealing faucet closes by pushing a shuttle against the faucet shank, at the rear of the faucet. So once the tap is closed the faucet is still full of beer that has to be drained out. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain. Because of this design, leftover beer residue inside the faucet makes operation sticky and can harbor bacteria which harm your beer’s flavor as it flows through the faucet. In the Perlick faucet, with its Forward Sealing design, beer only has to drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination!. Please note: In order for the push-back creamer to function properly, you must avoid overtightening the tap ferrule. If you're unable to push-back on the faucet lever, check that there's enough room between the tap ferrule and the friction bonnet and back off the tap ferrule as needed.
$104.99
Replacement gaskets and o-rings for German Slider (A-type) keg taps. KegLand Part Number: KL12331
$7.69
The last faucet wrench you'll ever own! The KOMOS Draft Wrench is a professional 7 function draft tool built for a lifetime of adjusting everything from your regulator and draft shanks to your keg coupler and hose clamps. You will appreciate the quality, compared to cheaper stamped draft wrenches, everytime you use it. The KOMOS Draft Wrench is laser cut from 12-gauge 304 Stainless Steel and hand finished. Designed by a draft tech with professional draft techs in mind. With all of its different functions, the Pro Draft Wrench is sure to save you many back-and-forth trips to the toolbox. However, we suggest a traditional Crescent wrench for loosening over tightened regulator to tank connections. The KOMOS wrench is great for general purpose, but a Crescent wrench is suggested when extra torque is needed. Features: Pin Wrench Screwdriver Regulator Adjuster Nut Wrench Keg Tap Probe Wrench Shank Coupler Nut Wrench Shank Lock Nut Wrench Regulator Wrench
$21.99
D-Type keg coupler for standard American sanke kegs Stainless steel keg probe Click-to-engage ergo lever handle Includes 1/4" OD barbs for gas inlet and liquid outlet The most popular keg coupler in the USA. Commercial D-Style sanke beer tap, also called a coupler, has a lock down mechanism that gives a solid click when engaged. Heavy duty construction is designed to withstand commercial usage. Beer is dispensed out of the top port, the side port is for gas. Nickel coated body with stainless steel probe This is the default tap used by most American Craft breweries. Here is a partial list of breweries that have been reported to being using American D style kegs. Abita ACME Alaskan Alexander Keith Anderson Valley Bad Frog BayHawk BBC Black Dog Blanche de Chambly Blue Moon Breckenridge Brooklyn Bruin Pale Ale Budweiser Busch Carlsburg Celis Cider Jack Columbia Brewing Coors Coors Light Corona Deschutes Black Butte Devil Mountain Dos Equis Eel River Brewing Ellicottville E.J. Phair Fat Tire Firehouse Firestone Flying Dog Foster's Full Sail Genesee George Killian's Irish Red Goose Island Gordon Biersch Grant's Green Mountain Cidery Hamms Hard Core Cider Henry Weinhard's High Falls Holy Cow Red Hornsby's Hudson Valley Humboldt Ice House Killarney Killian's Irish Red Kirin Ichiban Kokanee Labatt Blue Leinenkugel Little Kings Lost Coast Lowenbrau (US) Mad River Maudite Miami Trail Brewing Michael Shea's Michelob Mickey's Middle Ages Miller Milwaukee's Best Modelo Molson Canadian Moosehead Natural New Amsterdam New Zeland Steinlager Nor'Wester North Coast O'Doul's Old Milwaukee Old Vienna Pete's Portland Mactarnahan's Amber Portland Oregon Honey Pyramid Razors Edge Red Ale Red Dog Red Hook Red Wolf Rogue Dead Guy Ale Rogue Hazelnut Brown Rogue Red Rolling Rock Sam Adams Saranac Saxer Brewing Schmitt's Shiner Bock Ship Inn Shipyard Sierra Nevada Sleemans Southpaw Spanish Peaks Black Dog Starr Hill Brewery Steinlager Strohs Tecate Thomas Kemper Trois Pistoles Unibroue Wasatch Weinhard's Whitbread Ale Widmer Hefeweizen Woodchuck Dark & Dry Cider Wyder's Yuengling Zebra Kegland Part number: KL06064
$32.99
Comes with a 3/16" nipple, back nut, and plastic collar. It requires a 1" hole for installation. When set in place, the shank will only have about 11/16" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 3-3/4" - Total Length (Tip to Tip) 2-1/8" - Shank Length (Without Nut & Nipple) 1-1/4" - Thread Length 11/16" - Pass Through Length
$19.99
Also called a faucet positioner because it angles big tap handles from touching the wall or refrigerator. Installs on top of beer faucet lever and then the tap handle thread into this bonnet angler. Made from chrome plated brass.
$9.89
Love bringing a growler of your brew with you, but hate the waste and mess of filling it off your tap? Just pop this handy Stainless Steel Growler Filler into your faucet, attach an appropriate length of tubing, and proceed to fill from the bottom of the growler up! Filling from the bottom upward will dramatically reduce foaming, which less mess and wasted beer! and fill away! Faucet insert OD is 1/2”, barbed outlet is 3/8” OD. This model fits standard faucets. Will not fit Perlick or Perl faucets as their nozzles have a different inner diameter. For Perlick faucets please checkout item D1224.
$7.69
The X1 Faucet has been used for many beverage dispense applications over the years including beer, soda, carbonated water and other beverages. This faucet is a great choice when you need to dispense very cold beer that might freeze a metal faucet. This configuration features a self-closing faucet lever, and an Allen Key Security flow control adjustment system. Please note: the faucet handle and draft shank in the example photo are not included. Self-Closing, Allen Key Security Adjustment Food Grade (NSF Approved) plastic and stainless steel Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in "Creamer" function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad
$49.99
Replacement flow control shuttles for the Gen 2 NukaTap Flow Control faucet. These pieces are only for the flow control apparatus in the faucet, not the NukaShuttle itself. These pieces are backwards compatible with the Gen 1 NukaTap Flow Control model, replacing part numbers 11 and 12 in the diagram image above. KegLand Part Number: KL17817
$6.59
Replacement probe washers for D-Style Sanke keg couplers. Comes in a convenient zip lock bag.
$3.79
Replacement O-ring for beer faucet tower shanks D1239 and D1242. This O-ring sits underneath the coupling nut of the shank, behind the teeth where the shank connect to the faucet. KegLand Part Number: KL88067
$2.19
Replacement body washers for D-Style Sanke keg couplers. Comes in a convenient zip lock bag.
$6.99
For repairing a broken tap handle of building one from scratch. The tap ferrule is the piece you'll see at the bottom of most tap handles and is where the handle is screwed onto the faucet lever. You will also need hanger bolts (D2532) to screw the ferrule into a wood tap handle. 5/16" top threads and 3/8" bottom threads. Pack of 5. Comes in a convenient zip lock bag.
$15.49
This tower shank with Matte Black finish matches perfectly with the NukaTap Stealth Bomber faucet and features a Duotight compatible tailpiece. The 1/4" barb pairs with the Duotight 6.35 mm x 8 mm reducer (DUO10), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 & D1718). The Duotight fitting is sold separately and can be found below under "You Might Also Need". Please note these shanks are not compatible with Perlick brand faucets. KegLand Part Number: KL20084
$16.49
Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. When set in place, the shank will only have about 4-1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 7-1/8" - Total Length (Tip to Tip) 6" - Shank Length (Without Nut & Barb) 5" - Thread Length 4-1/2" - Pass Through Length Kegland Part number: KL01120
$43.99
Your custom-made tap handle will be the talk of the party! You can create your own tap handle and mount it with this threaded insert. Simply drill a 1/2" hole in the bottom of your wooden piece and thread the D1299 with a flathead screwdriver (a coin can also be used in a pinch!). When you’re finished, mount your custom tap handle to your faucet, pull a pint and admire your handiwork! Internal threads are 3/8", 16 thread-per-inch. Mounts to any standard faucet.
$3.29
Replacement gaskets and o-rings for the Intertap Flow Control faucets
$5.49
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut. Tailpieces are available in a range of barb sizes to fit up to your tubing size. 304 stainless steel construction means these pieces won’t rust or harbor bacteria that can ruin the taste of your beer.
$4.19
You can use pass through shanks for beer entry through the back side of a cooler. Drill a 1" hole through the cooler, insert the shank, and use the two attached nuts to tighten up on the cooler. You will need nuts and nipples of the size line you are working with as well as hose clamps. We do not use pass through shanks in our boxes because we drill a hole that is same size as the line so we can pull it back in when we are traveling. However there might be instances where they would be appropriate. Pass through shanks can also be used to put through the side of a refrigerator to pass a gas line through. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a stainless steel shank with chrome plated brass hex nuts. Dimensions: 3" - Shank Length 3" - Thread Length 1-7/8" - Pass Through Length Max length with hex nuts at either end Does not account for nuts/nipples you may install Male Beer Thread (5/8" BSP)
$24.49
You can use pass through shanks for beer entry through the back side of a cooler. Drill a 1" hole through the cooler, insert the shank, and use the two attached nuts to tighten up on the cooler. You will need nuts and nipples of the size line you are working with as well as hose clamps. We do not use pass through shanks in our boxes because we drill a hole that is same size as the line so we can pull it back in when we are traveling. However there might be instances where they would be appropriate. Pass through shanks can also be used to put through the side of a refrigerator to pass a gas line through Installation Note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. This is a stainless steel shank with chrome plated brass hex nuts. Dimensions: 4" - Shank Length 4" - Thread Length 2-3/4" - Pass Through Length Max length with hex nuts at either end Does not account for nuts/nipples you may install Male Beer Thread (5/8" BSP)
$29.99
Perfect for mobile draft dispensing with the NukaTap Mini Beer Faucet Clamp onto a picnic bench or folding table—an ideal option for backyard cookouts or concerts in the park Makes for a great temporary shank for weekend getaways, camping, or tailgating This bracket is compatible with table or bench edges that are up to 3.5" thick. It can be adjusted to have the wing nut clamp in either direction, simply unscrew the flange piece from the threaded rod, then unscrew, then thread from the opposing side. Please note: This item does not include the Mini NukaTap or Shank pieces. It is simply the stainless steel bracket. Recommended Accessories: NukaTap Mini Faucet (D1598) Wall Mount Shank Kit w/ 6.35 mm Duotight (D1598D) Self Closing Spring (D1598A) 6.35 mm OD EVABarrier Tubing (D1723C) KegLand Part Number: KL0407
$27.49
This handy tool is inserted into the bottom of your keg coupler to lift the ball check valve, allowing you to flush cleaning solution through from the tap without needing to disassemble the keg coupler. A simple solution to save you time while cleaning draft lines. Comes in a convenient zip lock bag.
$11.99
A-Type keg coupler fits most German beer kegs such as Paulaner and Spaten Click-to-engage ergo lever handle Includes 1/4" OD barbs for gas inlet and liquid outlet Barb elbow outlet is ideal for low clearance keg storage and easier line routing For Paulaner or Spaten keg, this is an A-Type keg tap. Also known as a keg coupler, keg tap, coupling, or adapter. Both barbs measure 3/16" ID and 1/4" OD. This model features a pull-ring pressure relief valve (not pictured). This Keg Tap Will Usually Fit: Ayinger Bitburger Pilsner Delirium Tremens (Belgium) Erdinger Hefetrub Weisse Fischer Franziskaner Hefe-Weisse Hacker-Pschorr Weisse Hoegaarden White Isenbeck Krombacher Kronenbourg 1664 Paulaner Spaten Staropramen Victoria Bitter Warsteiner KegLand Part number: KL06057
$58.99
With Duotight adapters you can take your draft system into the 21st century with EVABarrier draft line. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. 4 mm x 8 mm EVABarrier is our recommended size for short beer lines in the 5-6 ft. range. 5 mm x 8 mm EVABarrier is recommended for longer beer lines in the 10-12 ft. range. The KOMOS S-style coupler for European kegs can also be purchased bare if you prefer a different connection style. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
$51.99
These stainless short shanks are typically used for attaching faucets to a KOMOS® Cobra style draft tower. The threaded section measures 25mm in length (0.98").
$14.99
Keep your draft faucet in perfect working order. Replace your old friction washer to keep your faucet lever moving properly This is the second washer of a two part set (D1200D) With this washer you can renew a worn-out part on your well-used draft faucet. This replacement part is the second washer of a two part set that is used to control motion of lever.
$0.99
Angled 1/4" tailpiece that is used with hex nut (D1740). Fits on couplers and shanks. Requires 1-1/16" clearance above the coupler or behind the shank. Made from stianless steel. ID - 3/16" OD - 1/4" Kegland Part number: KL05081
$8.19
Keep your draft faucet in perfect working order. Replace your old coupling nut to keep your faucet firmly attached to your shank Knurled finish makes gripping easy With this faucet replacement nut you can renew a worn-out part on your well-used draft faucet. This replacement part is the nut that attaches the faucet to the shank. Knurled finish makes it easy to snug even with wet hands.
$2.99
D-Type keg coupler for standard American sanke kegs All stainless steel with stainless coupler body and stainless keg probe Pull-to-engage lever handle Includes 3/8" OD barb for gas inlet Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment Made in the USA The D-Style beer tap is the most commonly-used keg coupler in the U.S. If you’re going to serve commercial draft beer that was made in the US and is dispensed from your standard American sankey keg, this is the style tap you’ll need. American-made by Taprite, this coupler is constructed from stainless steel and features a lock-down mechanism that produces a satisfying “click” when engaged. Its heavy-duty construction is designed to withstand frequent commercial use, so you know it’ll last for years at home. The 304 stainless body and probe will provide a more reliable life span compared to its nickle-plated counterpart. Features a built-in pressure relief valve for safety. To dispense beer, gas is pushed into the keg through the tap’s side port and the beer exits through the top port. The tail piece, hex nut or gasket for dispensing beer out of the top port must be purchased separately. We offer a pre-made kit with a 1/4” tailpiece (D1720B), as well as a range of other tailpiece sizes to match whatever diameter beer line you’re using.
$75.99
