Power supply for the Cannular Pro Semi Auto Can Seamer or MaltZilla Grain Mill. One end is an Anderson plug, which connects to the socket located on the back of the unit. The other end is a 110V plug to use with a standard power outlet.
Kegland Part number: KL17336
This add-on table spacer allows the Cannular Can Seamer to be used with 330ml Can Fresh Cans (CAN133). The Cannular was designed to work with the 500ml cans right out of the box, but for smaller cans the spacer is required to lift the can up a bit higher.
NOTE: You will need to make some adjustments to the Cannular before using this table spacer. Please see the video below.
Kegland Part number: KL13086
Canning beer can be a messy business. Keep your workspace clean with this splash guard! In order to have the lowest amount of dissolved oxygen in your canned beer, you need to place the lid on top of a nice layer of foam. The problem is, once the can starts spinning, all the excess foam gets thrown off in every direction. Add this splash guard to your seamer and contain the canning chaos!
This unit is specifically made for the Cannular Pro model (CAN110). For the manual Cannular model splash guard, see CAN105.
Kegland Part number: KL16728
Please Note: This part is intended to be used with the Manual Cannular Seamer (CAN100) which has been superseded by the Cannular Pro. This item will not work with the Cannular Pro (CAN110).
Canning beer can be a messy business. Keep your workspace clean with this splash guard! In order to have the lowest amount of dissolved oxygen in your canned beer, you need to place the lid on top of a nice layer of foam. The problem is, once the can starts spinning, all the excess foam gets thrown off in every direction. Add this splash guard to your seamer and contain the canning chaos!
This unit is specifically made for the manual Cannular model (CAN100). For the Cannular Pro splash guard, see CAN106.
Kegland Part number: KL16711
This power lead for the Cannular Can Seamer has an anderson plug on one end and alligator clips on the other. This can be used to power the Cannular from a stand alone battery, including a standard 19v power drill battery as pictured in the example photo.
Kegland Part number: KL12348
Carbon Steel Chuck for Cannular Pro Semi-Auto Can Seamer. This chuck can be swapped in for the standard chuck so you can change from 16 oz or smaller cans to 32 oz Crowlers. Suitable for Ball 300 End aluminum crowler cans.
This chuck is not compatible with the standard manual Cannular unit.
KegLand Part Number: KL17763
Please Note: This part is intended to be used with the Manual Cannular Seamer (CAN100) which has been superseded by the Cannular Pro. This item will not work with the Cannular Pro (CAN110).
Replacement Turntable Bearing for Cannular Manual can seamer (CAN100).
Carbon Steel Chuck for Cannular Pro Semi-Auto Can Seamer. This 100mm chuck can be swapped in for the standard chuck so you can change from doing aluminum cans to steel cans.
This chuck is not compatible with the standard manual Cannular unit.
Kegland Part number: KL16766
Replacement On/Off Power Switch for Cannular can seamer. This part is compatible with both the Manual and Semi-Auto units.
NOTE: the switch might be yellow or blue. You can tell the Operation Switch from the Power Switch by testing the button. The Operation Switch can be depressed/pushed in while the Power Switch will only click when pressed.
KegLand Part Number: KL13253
This is a direct replacement of the table spacer that comes standard with the Cannular Can Seamer. Sized for 500 ml / 16.9 oz Can Fresh aluminum cans.
Kegland Part number: KL13277
Replacement DPDT Power Relay for the Semi Automatic Cannular Pro. If the motor of your Cannular Pro is not turning off after running through a full rotation then you may need to replace the power relay. This relay distributes power to the motor when the operation button is pressed and also turns the motor off once the microswitch has been activated and hence the Cannular has run through a full seaming rotation.
Specifications:
Model: JQX-13F(D) 8-Pin
Voltage & Current Ratings:
10A 250V AC
10A 24V DC
KegLand Part Number: KL21524
Replacement table spacer for the Cannular Pro Semi-Auto Can Seamer (CAN110). Suitable for 500mL, 330mL aluminum cans and tin cans.
It is not compatible with the manual seamer model (CAN100).
KegLand Part Number: KL17879
Replacement Operation Switch (Momentary Switch) for Cannular can seamer. This switch is only compatible with the Cannular Pro Semi-Auto unit.
NOTE: the switch might be yellow or blue. You can tell the Operation Switch from the Power Switch by testing the button. The Operation Switch can be depressed/pushed in while the Power Switch will only click when pressed.
KegLand Part Number: KL16445
Easily switch your Cannular Bench Top Canning Machine between B64 and CDLE ends without changing rollers
Specifically designed for use with Visy/CDLE (Ardagh) can ends
Hardened stainless steel construction, machined to tight tolerances for consistent seaming
This chuck allows the Cannular Bench Top Canning Machine to be used with Visy/CDLE ends. Instead of changing the rolls, simply swap the chuck, make minor adjustments to the rolls and table height, and you can quickly seam CDLE ends.
Most aluminum can bodies are manufactured to the 202 standard. Two primary manufacturers produce lids for these 202 cans. The B64 is the standard lid used on most of the 500ml and 330ml cans we offer. Both 202 can designs are also compatible with other CDLE ends, should you wish to use your own.
About Can End Manufacturers
Two major competitors produce aluminum beverage can lids: Ardagh Group (a European company) primarily supplies CDL-type ends, and Ball (an American company) mainly supplies B64 and other end types. CDL and B64 are the dominant end types for 202 can bodies. B64 ends are commonly used in America, while CDL ends are more prevalent in Europe.
About CDLE Ends
CDLE ends are the primary type sold by Visy, as they license the technology from Ardagh Group. While some may refer to them as CDL ends, the correct technical name is CDLE. This should not be confused with the CDLE's predecessor, CDL+.
Specifications:
Hardened stainless steel construction
Machined to 20-micron tolerance
Fits 19mm drive shaft
Tightened with a 3mm Allen key
KegLand Part Number: KL14670
Please Note: This part is intended to be used with the Manual Cannular Seamer (CAN100) which has been superseded by the Cannular Pro. This item will not work with the Cannular Pro (CAN110).
Replacement Turntable Base for Cannular can seamer. (CAN100).
Not compatible with the Semi Auto Cannular Pro model.
KegLand Part Number : KL13345
Replacement turn table assembly and handle for the Cannular Pro Semi-Auto Can Seamer (CAN110).
It is not compatible with the manual seamer model (CAN100).
