Stainless steel IBC tanks provide a reliable solution in beverage making for storage, mixing, fermentation, and transportation Designed with a palletized base, built-in forklift channels, and a sturdy galvanized cage for easy movement and stacking up to 2-high Made from high-quality 304 stainless steel, ensuring durability and a hygienic environment for fermenting or aging beverages Lid features a 1.5" T.C. ferrule, allowing for the addition of a spunding valve, CIP spray ball, or other accessories Full draining bottom outlet with a 1.5" T.C. butterfly valve for efficient liquid transfer External cooling jacket with 1.5" T.C. inlet and outlet Also available without the cooling jacket Stainless steel IBC tanks provide a reliable solution in beverage making for storage, mixing, fermentation and transportation. Crafted from high-quality 304 stainless steel, these tanks ensure an airtight, hygienic environment that preserves the quality of both raw ingredients and finished beverages. The built-in forklift channels and robust outer cage make them easy to move around your facility, even when full, and allow them to be stacked on top of each other 2-high. These tanks feature a wide 15.75" lid opening with a 1.5" tri-clamp ferrule in the lid, allowing you to add a spunding valve for fermentation or CIP spray ball of cleaning. The 1.5" T.C. bottom outlet includes a stainless steel butterfly valve. Stainless steel IBC tote 1,000 L / 265 Gallons / 8.5 bbl capacity 1040L / 275 gallons Nominal Capacity (filled to brim) Welded cooling jacket with 1.5" T.C. In/Out 2mm thick 304 stainless steel Passivated Internal BA finish External satin finish Full draining bottom with 1.5" T.C. butterfly valve Upper lid diameter: 15.75" (400mm) 1.5" T.C. ferrule in lid Palletized base with fork lift slots Galvanized cage 44.6" x 44.6" x 57.4" Please Note: Do not stack more than 2 tanks, even when empty. Only move one tank at a time. Never move stacked tanks whether full or empty. The tank must be handled by means of the forks only from the front side. Never use the forks from the side.
Healthy, strong, properly rehydrated yeast cells that are prepared for a perfect fermentation
Automated process saves labor
Repeatability: process can be repeated by the machine without variables from human preparation
Increased viability and cell count reduces the amount of yeast needed.
The German made Yeast Booster Pro from Quantor offers a labor saving, precise, repeatable method for rehydrating dry yeast. Designed to rehydrate up to 2,000 grams of yeast at a time (available Yeast Booster Max handles up to 10,000 grams) with built-in temperature control and automated pumping in of water and juice. The result is consistently healthy yeast, producing optimum flavors, with greatly reduced chances of stuck fermentation.
The Yeast-Booster is run by a processor. All the required parameters can be set in the menu: start temperature, target temperature, time, etc. From the menu change the language and adjust the display lighting contrast. In the start phase the water will be heated to 101.3°F/38.5°C. Upon reaching the target temperature the yeast is added to the mixture. During the first phase of the propagation, the yeast will be gently circulated through a membrane pump, which will break up lumps and add oxygen to the mixture. Fresh must from the target tank will be added to the mixture every 15 minutes to acclimate the yeast. At the end of the up-scaling process, the propagated yeast mixture will be pumped into the target tank. The Yeast-Booster can then start the rinsing and cleaning cycle. The cycle lasts 2-3 hours, allowing time for cells to become active and begin replication.
The Yeast Booster is equipped with robust motorized valves, a strong pump for faster emptying, and a perforated stainless screen at the bottom of the tank breaking-up remaining clumps of dry-yeast to reach a fine, homogenous mixture. The unit is jacketed for connection to water (or glycol) for cooling and also features a built-in electric heater for precise temperature control during rehydration. Tank, screen, control panel, and frame are made from stainless steel.
110V, Single Phase, 60Hz
