The KOMOS Deluxe Kegerator model boasts the same features as the standard model with an eye-catching stainless steel extrerior and upgraded stainless steel drip tray. The interior is designed to fit up to four 5-gallon ball lock kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless door and exterior, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless steel door, top cover, and side panels Stainless Countertop Style Drip Tray Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feauture a Guard Rail as seen in the residental kegerator instructions.) Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Counter top inline keg dispenser that can serve ice cold beer from unchilled kegs Compact and portable. Use anywhere you have access to 110V power Superior cooling capacity. Chill up to 8 gallons of beer, inline, per hour! Fill the reservoir with tap water, or use a glycol solution for optimal performance NukaTap Flow Control Faucets, tap handles, and drip tray included Great for bars, restaurants that need to add capacity These style chillers are how beer is poured in most European cafes If you're looking for a home draft system, but don't have the space for a kegerator or keezer, we've got the answer! The KOMOS KRYO benchtop keg dispenser can serve ice cold beer from unchilled kegs. It's essentially an electric jockey box that chills beer inline as it passes from the keg through the internal draft coils that sit submerged in the glycol reservoir. Simply place it on your counter or benchtop, fill the reservoir with a 20% glycol solution, and hook up your keg to the draft shank bulkheads. In roughly an hour, the reservoir will have cooled down enough that you'll be ready to pour! And thanks to the compact size, the KRYO can easily be transported from your home to the next backyard BBQ, cabin trip, wedding, or virtually any gathering of thirsty people you can think of. For homebrewers this would allow you to keep your refrigerator at fermenation temperatures while always seving your beer ice cold. Glycol Reservoir Although you can fill the reservoir with water only, for optimal performance we highly recommend using a glycol/water mix so you can lower the chilling solution below freezing. You simply won't be able to get your beer as cold if using water only. The sight gauge at the front will let you know if it's time to top up the reservoir, but also functions as a drain. When it's time to move the KRYO from one location to another, drain out the glycol into a sealable container to avoid spills during transportation. The glycol reservoir provides an exceptional amount of cooling power that makes it perfect for servicing small bars or cafes, as well as home use. If you're deciding between this model and the KRYO Nomad, note that peak chilling capacity for this model is approximately 8 gallons per hour, whereas the Nomad can chill up to roughly 2 gallons per hour. NukaTap Flow Control Faucets These stainless steel forward sealing faucets allow you to make instant adjustments to the beverage flow as you pour. A perfect faucet for those who often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Adjust the flow control level to dial in the flow rate and pour perfect pints every time! They also have the lowest thermal mass and best laminar flow design to further reduce foaming issues. Draft Shank Bulkheads The draft shank bulkheads with beer thread allow you to choose the type of fittings and draft line that best suits your needs. We highly recommend EVABarrier draft line and Duotight fittings—the same lines and fittings that come standard with our KOMOS Kegerators. These Duotight Female Beer Thread Adapters will allow you to hook up 8 mm OD EVABarrier, and also work with sanke keg couplers if you'll be dispensing commercial kegs. For homebrew kegs, we recommend Duotight Flare Adapters for your QDs, or if you're starting from scratch, consider the Duotight Ball Lock Quick Disconnects. Includes: (2) NukaTap Stainless Flow Control Faucets (2) Tap Handles Stainless Countertop Drip Tray w/ Removable Grill Features: Chill 8 gallons of beer per hour (based on 68°F ambient) Draft shank bulkheads compatible with Duotight fittings or nut & tailpiece combos STC-1000 temperature controller (reads in °C) Reservoir volume: 4.2 gal Voltage: 110V-120V Current: 0.9A Frequency: 60Hz Dimensions: 19" x 12" x 17.5" (not including faucets / drip tray) CE Certified Reservoir Temp Controller: Follow these steps to adjust the SET temperature on the controller. If using water only, be sure to keep the reservoir temp set at or above 2°C to avoid freezing. With a 20% glycol solution, you can set the temp as low as -2°C. The reservoir volume is 4.2 gallons, so you will only need to purchase 1 gallon of glycol to make a 20% mix. Hold the 'Up" button for 3 seconds until the number is flashing While the number is flashing, press the 'Down' button to decrease the set temperature or press the 'Up' button to increase the set temperature. Wait 3 seconds and the controller will save the setting and return to normal operation mode. Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer.
Counter top inline keg dispenser that can serve ice cold beer from unchilled kegs Compact and portable. Use anywhere you have access to 110V power Superior cooling capacity. Chill up to 8 gallons of beer, inline, per hour! Fill the reservoir with tap water, or use a glycol solution for optimal performance NukaTap Flow Control Faucets, tap handles, and drip tray included Great for bars, restaurants that need to add capacity These style chillers are how beer is poured in most European cafes If you're looking for a home draft system, but don't have the space for a kegerator or keezer, we've got the answer! The KOMOS KRYO benchtop keg dispenser can serve ice cold beer from unchilled kegs. It's essentially an electric jockey box that chills beer inline as it passes from the keg through the internal draft coils that sit submerged in the glycol reservoir. Simply place it on your counter or benchtop, fill the reservoir with a 20% glycol solution, and hook up your keg to the draft shank bulkheads. In roughly an hour, the reservoir will have cooled down enough that you'll be ready to pour! And thanks to the compact size, the KRYO can easily be transported from your home to the next backyard BBQ, cabin trip, wedding, or virtually any gathering of thirsty people you can think of. For homebrewers this would allow you to keep your refrigerator at fermenation temperatures while always seving your beer ice cold. Glycol Reservoir Although you can fill the reservoir with water only, for optimal performance we highly recommend using a glycol/water mix so you can lower the chilling solution below freezing. You simply won't be able to get your beer as cold if using water only. The sight gauge at the front will let you know if it's time to top up the reservoir, but also functions as a drain. When it's time to move the KRYO from one location to another, drain out the glycol into a sealable container to avoid spills during transportation. The glycol reservoir provides an exceptional amount of cooling power that makes it perfect for servicing small bars or cafes, as well as home use. If you're deciding between this model and the KRYO Nomad, note that peak chilling capacity for this model is approximately 8 gallons per hour, whereas the Nomad can chill up to roughly 2 gallons per hour. NukaTap Flow Control Faucets These stainless steel forward sealing faucets allow you to make instant adjustments to the beverage flow as you pour. A perfect faucet for those who often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Adjust the flow control level to dial in the flow rate and pour perfect pints every time! They also have the lowest thermal mass and best laminar flow design to further reduce foaming issues. Draft Shank Bulkheads The draft shank bulkheads with beer thread allow you to choose the type of fittings and draft line that best suits your needs. We highly recommend EVABarrier draft line and Duotight fittings—the same lines and fittings that come standard with our KOMOS Kegerators. These Duotight Female Beer Thread Adapters will allow you to hook up 8 mm OD EVABarrier, and also work with sanke keg couplers if you'll be dispensing commercial kegs. For homebrew kegs, we recommend Duotight Flare Adapters for your QDs, or if you're starting from scratch, consider the Duotight Ball Lock Quick Disconnects. Includes: (2) NukaTap Stainless Flow Control Faucets (2) Tap Handles Stainless Countertop Drip Tray w/ Removable Grill Features: Chill 8 gallons of beer per hour (based on 68°F ambient) Draft shank bulkheads compatible with Duotight fittings or nut & tailpiece combos STC-1000 temperature controller (reads in °C) Reservoir volume: 4.2 gal Voltage: 110V-120V Current: 0.9A Frequency: 60Hz Dimensions: 19" x 12" x 17.5" (not including faucets / drip tray) CE Certified Reservoir Temp Controller: Follow these steps to adjust the SET temperature on the controller. If using water only, be sure to keep the reservoir temp set at or above 2°C to avoid freezing. With a 20% glycol solution, you can set the temp as low as -2°C. The reservoir volume is 4.2 gallons, so you will only need to purchase 1 gallon of glycol to make a 20% mix. Hold the 'Up" button for 3 seconds until the number is flashing While the number is flashing, press the 'Down' button to decrease the set temperature or press the 'Up' button to increase the set temperature. Wait 3 seconds and the controller will save the setting and return to normal operation mode. Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer.
Looking for a premium kegerator to install under the counter of your home bar or outdoor kitche? The KOMOS Outdoor Kegerator offers the best value in the USA for an all stainless steel outdoor rated kegerator. With an all stainless interior and exterior, this unit is built to operate at a level other kegerators simply can't reach. Heavy duty casters come standard for maximum mobility, and front facing ventilation makes it ideal for using as a built in kegerator in an outdoor kitchen. Features include tower cooling fan, wide-range digital controller, stainless door and exterior, stainless floor and interior, heavy-duty casters as standard, and a list of options.
Please note the kegerator does not come with a plug for the tower hole. The KOMOS Kegerator is intended to be installed under counter tops or paired with a standard 3" diameter draft tower.If you plan to install the kegerator under a countertop, the top cover will need to be removed and you will need to install the Build-In Door Hinge, as the top door hinge is removed with the cover.
For homebrewers looking for a temperature controlled fermentation chamber, we recommend the KOMOS residential model.
Best Choice for Outdoors
With its stainless steel construction and powerful compressor this Komos Kegerator is the best choice for outdoor kitchens, bbq islands, or poolside placements. The forward-facing vents at the bottom of the kegerator allow this unit to be installed under counter without having to leave 2-3 inches on each side of the kegerators as is required with some other models. The model also features more power than the standard residential version and can stand up to ambient temperatures up to 104°F. You will want to place your kegerator in a position to be protected from rain.
Easy to Clean
The stainless steel countertop drip tray looks great and couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Best Value & Backed by MoreBeer!
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on an all stainless steel kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. In the rare and unfortunate scencario your unit arrives damaged just call us up and we will work with you to take care of it.
Feature Summary:
Digital Thermostat with wide 28 - 76° F temp range.
CO2 Tank strap mounts above a triangular stage inside the kegerator
Tower cooling fan
Efficient and powerful compressor uses R600 refrigerant
Beautiful stainless interior and exterior
Stainless Steel Countertop Style Drip Tray
Stainless Steel Floor for additional keg support
Heavy duty rolling casters come standard
Front-facing ventilation allows it to be built-in to a cabinet, kitchen, or outdoor counter
Lock & key to keep your precious beverages protected
UL & CSA Certified
Detailed instructions on assembly and use
Specifications:
24" Wide
25" Deep
35" Tall (fridge only)
39.25" Tall with Caster Wheels
115V - 60 hz
1.6 Amp draw
Works well in ambient temperatures up to 100°F
Internal Dimensions:
21" Wide
18.25" Max Depth
28.5" Tall
27" clearance under controller
What Fits:
2.6 Gal. BrewKeg - 2
5 Gal. Torpedo Keg - 3
5 Gal. Slimline Torpedo Keg - 3
5 Gal. Megamouth Torpedo Keg - 2
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 3
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 2
15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
See below for the Kegerator Instruction Manual.
The KOMOS Deluxe Kegerator model boasts the same features as the standard model with an eye-catching stainless steel extrerior and upgraded stainless steel drip tray. The interior is designed to fit up to four 5-gallon ball lock kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless door and exterior, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless steel door, top cover, and side panels Stainless Countertop Style Drip Tray Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feauture a Guard Rail as seen in the residental kegerator instructions.) Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Condition: Used - Good
This unit is used. It shows wear from use but is in good condition and works perfectly. It may have cosmetic defects or show other signs of previous use.
It is still covered by our No Hassle Return Policy and 1 Year Warranty Policy.
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits)
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit!
The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter.
The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines.
Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller that can adjust internal temperatures from 26 - 82°F. This allows homebrewers to use it for fermentation and is something that other kegerators don't do. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
KOMOS Regulator
The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Optional Draft Towers
Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you!
Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free.
Optional Faucets
The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable.
For more info on each faucet option, check them out below the description.
Best Value & Backed by MoreBeer!
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it.
Feature Summary:
Digital Thermostat with wide 26 - 82° F temp range.
Robust MKIII CO2 Regulator included
Pre cut hole on top perfectly sized for 3" diameter tower
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Drip Tray is removable for easy cleaning
Aluminum floor panel for additional keg support
Rolling casters
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
Available Kegerator covers and "off road" casters for moving over uneven terrain.
Specifications:
23.75" wide
25" deep
31.5" with CO2 mount
32.5" Tall
35" with Caster wheels
110 v - 60 hz
0.8 Amp draw
Optimal ambient temperature is 65°F – 80°F
CSA Certified
Internal Dimensions:
19.5" wide
17" deep
16" down the center where compressor sits
28.5" tall
What Fits:
5 Gal. Torpedo Keg - 3
5 Gal. Slimline Torpedo Keg - 4
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1
15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Keep the party flowin' with a KOMOS Jockey Box! This extra beefy rotomolded Rubicon Cooler is an absolute beast and will surely outlast your run-of-the-mill jockey box. With forward-sealing Intertap faucets and all-stainless 50-foot draft coils, the KOMOS Jockey Box was designed from the ground up to keep your beer pouring with less foam for longer.
KOMOS Rubicon Jockey Box
100% stainless steel draft coils
Shanks & coils are custom designed for proper cooling and flawless pouring
The only draft box that uses stainless steel Intertap forward sealing faucets
Push-In coil design applies force toward shank connection to protect against shank and coil separation
Stainless Steel construction on all serving components means this box will last for years
Heavy-duty rotomolded Rubicon Cooler is virtually indestructible
High-density polyurethane insulation and compression lid for superior ice retention
Pairs perfectly with a KOMOS Connection Kit
Features:
37 Quart Rubicon Cooler
4 x 50’ Stainless Steel Coils (5/16” OD)
4 x Stainless Steel Faucet Shanks
4 x Stainless Steel Pass Through Shanks
4 x Stainless Steel Flanges
4 x Stainless Steel Forward Sealing Faucets
4 x Black Tap Handles
Jockey Box Specs:
23.25" L x 16.25" W x 16.5" H
45.7 lbs
Portable, Inline, Keg Dispensing unit that can be powered via 110V outlet Replaces a traditional Draft Box/Jockey Box with no ice required Differs from the regular Komos Kryo Inline Chiller in that there is no glycol reservoir / The Nomad is liquid-free and easier to transport Can chill up to 2 gallons of room temperature beer, inline, per hour NukaTap Flow Control Faucets, tap handles, and drip tray included Mobile draft dispensing has never been easier with the KRYO Nomad electric keg dispenser. As with a jockey box, beer is chilled inline as it passes from the keg through the internal draft coils which are chilled by the electrically powered solid carbon based heat sink. With a standard 110V outlet, you can serve ice cold beers from an unchilled keg, and unlike the KRYO glycol unit, this model is absolutely liquid-free, making it the ideal choice for mobile draft dispensing. No need to wait an hour for glycol solution to chill, once you power on the Nomad, you'll be ready to go in as little as 15 minutes! Carbon Heat Sink The secret to the KRYO Nomad's incredible chilling capacity and portability is the solid carbon based heat sink. This heat exchange technology requires no liquid whatsoever, so you'll never run into issues with emptying or spilling coolant when you transport this chiller from place to place. It provides roughly 300 watts of cooling power which allows you to chill about 2 gallons of beer per hour. Just be sure to give the unit about 2 minutes to recover for each 16 oz pour. The Nomad is very power efficient, drawing only 60 watts of power when the compressor is running. When idling, the chiller uses only 1.6 watts of power, meaning it it averages only 15 watts of power draw when turned on and periodically cycling the compressor. NukaTap Flow Control Faucets These stainless steel forward sealing faucets allow you to make instant adjustments to the beverage flow as you pour. A perfect faucet for those who often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Adjust the flow control level to dial in the flow rate and pour perfect pints every time! They also have the lowest thermal mass and best laminar flow design to further reduce foaming issues. Duotight Bulkheads Draft lines connect directly to 8 mm Duotight bulkheads located at the rear of the unit. To hook up your kegs to the KRYO Nomad, we highly recommend EVABarrier draft line and Duotight fittings—the same lines and fittings that come standard with our KOMOS Kegerators. 8 mm OD EVABarrier plugs directly into the bulkheads, then depending on what type of kegs you'll be pouring, you can use these Duotight Female Beer Thread Adapters for sanke keg couplers if you'll be dispensing commercial kegs, or for homebrew kegs, we recommend Duotight Flare Adapters for your QDs, or if you're starting from scratch, consider the Duotight Ball Lock Quick Disconnects. Includes: (2) NukaTap Stainless Flow Control Faucets (2) Tap Handles Stainless Countertop Drip Tray w/ Removable Grill Features: Chill 2 gallons of beer per hour (based on 68°F ambient) Duotight bulkheads compatible with 8 mm OD EVABarrier tubing AC Voltage via IEC Plug: 110-120V Max Power Draw: 300W Dimensions: 9.25" x 13.7" x 18.1" (not including faucets / drip tray) CE Certified Temp Controller: Follow these steps to adjust the SET temperature on the controller. Press and release the 'SET' button to enter into the user menu. Press 'SET' will display the value of the target temperature setting. Press the 'Up' or 'Down' button to increase or decrease the set temperature. Press the snowflake icon button or wait 30 seconds and the controller will save the setting and return to normal operation mode. Warning: Do not set the temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
Sometimes a single draft tower isn't enough for your dream home bar or kegerator. If you're building out a draft system that will have more than four faucets, we highly recommend the KOMOS Double T Bar Draft Tower. Available in 6-tap and 8-tap models, these towers provide ample room for your faucets and will give your draft setup a much cleaner look than having multiple single-column towers. Perfect for upgrading an existing KOMOS Double-Wide Kegerator with two individual towers or designing your own home bar or kegerator. Mounting hardware, tower collars and gaskets included. The tower does not include faucets, shanks, tap handles, or draft tubing. Assembly To assemble the tower, remove the dust caps on either side and remove the foam insulation. Start with the inner most shank hole on either side and work your way outward. We recommend installing each shank and attaching the draft tubing before moving on to the next shank hole. The top section of the tower is 5" in diameter, so most people should be able to reach inside to install the shanks by hand or with the help of a draft wrench. When all the shanks have been mounted, reinsert the foam insulation. The tower may come with more insulation than needed and may need to be cut thinner before reinserting. We recommend using the Double Offset Shank Wrench to help with assembly. Duotight Compatible Tower Shanks We highly recommend pairing the draft tower with Intertap Tower Shanks with Duotight Compatible Barb. When it comes to assembly, there's nothing easier than Duotight push-to-connect fittings, and the same goes for whenever you might need to disassemble a line for cleaning. Duotight fittings pair perfectly with EVABarrier draft tubing, our preferred beer & gas tubing that offers superior protection from oxidation, CO2 loss, and microbial growth. Tower Dimensions: 29.5" L x 5" D x 16" H. The centers of the columns are approximately 16" apart. Not compatible with the KOMOS Olympus III kegerator.
Condition: New - Cosmetic Defect
This unit is new. It is in new and good condition but has cosmetic defect(s) such as scratch(es) and/or dent(s).
The KOMOS Deluxe Kegerator model boasts the same features as the standard model with an eye-catching stainless steel extrerior and upgraded stainless steel drip tray. The interior is designed to fit up to four 5-gallon ball lock kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless door and exterior, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter.
The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines.
Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Best Value & Backed by MoreBeer!
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it.
Feature Summary:
Digital Thermostat with wide 26 - 82° F temp range.
Robust MKIII CO2 Regulator included
Pre cut hole on top perfectly sized for 3" diameter tower
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless steel door, top cover, and side panels
Stainless Countertop Style Drip Tray
Aluminum floor panel for additional keg support
Rolling casters
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
Available Kegerator covers and "off road" casters for moving over uneven terrain.
Specifications:
23.75" wide
25" deep
31.5" with CO2 mount
32.5" Tall
35" with Caster wheels
110 v - 60 hz
0.8 Amp draw
Optimal ambient temperature is 65°F – 80°F
CSA Certified
Internal Dimensions:
19.5" wide
17" deep
16" down the center where compressor sits
28.5" tall
What Fits:
5 Gal. Torpedo Keg - 3
5 Gal. Slimline Torpedo Keg - 4
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4
5.2 Gal. Oxebar PET Keg - 3
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1
15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feauture a Guard Rail as seen in the residental kegerator instructions.)
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
The KOMOS Olympus Kegerator was engineered with commercial use in mind, and easily stands up to the rigorous demands of a professional environment. That being said, this absolutely gorgeous kegerator will only enhance whatever room it finds itself in, whether that's the local taproom or your home bar. Features double-pane swinging glass doors with lock & key, recessed drip tray with pre-plumbed drain, adjustable height wire rack shelves, interior lighting, rubber floor mat, easy to use digital thermostat, and heavy duty rolling casters.
Please note the kegerator does not come with a plug for the tower holes. The Olympus is intended to be paired with standard 3" diameter draft towers or the KOMOS Quad Tap Tower kits.
Feature Summary:
Easy to use digital temperature controller
Commercial grade compressor uses R290 refrigerant
Tower cooling fan
Beautiful stainless steel countertop style surface
All stainless steel interior with rubber floor mat
Recessed countertop style drip tray with built-in drain
Adjustable-height Rubber-coated stainless steel bottle racks
Heavy duty rolling casters come standard
Front and side facing ventilation for maximum cooling efficiency
Lock & key to keep your precious beverages protected
Interior lighting can be switched On/Off from the outside
ETL Certified
CO2 Regulator, tower, draft lines not included
Specifications:
90.875" Wide
27.75" Deep
36.75" Tall (fridge only)
40" Tall with Caster Wheels
+15.75" with 4-Tap Tower
+12.75" with 1 to 3-Tap Tower
115V - 60 hz
2.88 Amp draw
Internal Dimensions:
78" Wide
21.75" Deep
29.25" Tall
Door Frames - 28.75" H x 21" W
What Fits:
5 Gal. Slimline Torpedo Keg - 20
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 20
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 5
15.5 Gal. Half Barrel Keg (Full Size Keg) - 5
Please note: The optimal conditions for this unit are an indoor environment with temperatures not exceeding 86°F and 55% relative humidity. If used outdoors or in an environment exceeding these conditions, note that the unit will operate for longer durations, and defrost cycles will vary based on temperature and humidity levels.
This solid black door for the right side of the Olympus II or middle and/or right side of the Olympus III kegerator can be installed if you want one of the interior sections of the fridge to be protected from sunlight. The solid doors provide better insulation compared to the glass doors, and will protect beer bottles and draft lines from UV exposure if the fridge is positioned in direct sunlight.
This solid black door for the left side of the Olympus II or Olympus III kegerator can be installed if you want one of the interior sections of the fridge to be protected from sunlight. The solid doors provide better insulation compared to the glass doors, and will protect beer bottles and draft lines from UV exposure if the fridge is positioned in direct sunlight.
Replacement glass door for the left side of the Olympus II or Olympus III kegerator.
Please note: This glass door is a direct replacement part for the standard Olympus model which has been superseded by the Olympus Deluxe model. The door has a black trim rather than the stainless steel trim of the deluxe model.
Sometimes a single draft tower isn't enough for your dream home bar or kegerator. If you're building out a draft system that will have more than four faucets, we highly recommend the KOMOS Double T Bar Draft Tower. Available in 6-tap and 8-tap models, these towers provide ample room for your faucets and will give your draft setup a much cleaner look than having multiple single-column towers. Perfect for upgrading an existing KOMOS Double-Wide Kegerator with two individual towers or designing your own home bar or kegerator. Mounting hardware, tower collars and gaskets included. The tower does not include faucets, shanks, tap handles, or draft tubing. Assembly To assemble the tower, remove the dust caps on either side and remove the foam insulation. Start with the inner most shank hole on either side and work your way outward. We recommend installing each shank and attaching the draft tubing before moving on to the next shank hole. The top section of the tower is 5" in diameter, so most people should be able to reach inside to install the shanks by hand or with the help of a draft wrench. When all the shanks have been mounted, reinsert the foam insulation. The tower may come with more insulation than needed and may need to be cut thinner before reinserting. We recommend using the Double Offset Shank Wrench to help with assembly. Duotight Compatible Tower Shanks We highly recommend pairing the draft tower with Intertap Tower Shanks with Duotight Compatible Barb. When it comes to assembly, there's nothing easier than Duotight push-to-connect fittings, and the same goes for whenever you might need to disassemble a line for cleaning. Duotight fittings pair perfectly with EVABarrier draft tubing, our preferred beer & gas tubing that offers superior protection from oxidation, CO2 loss, and microbial growth. Tower Dimensions: 29.5" L x 5" D x 16" H. The centers of the columns are approximately 16" apart. Not compatible with the KOMOS Olympus III kegerator.
Keep the party flowin' with a KOMOS Jockey Box! This extra beefy rotomolded Rubicon Cooler is an absolute beast and will surely outlast your run-of-the-mill jockey box. With forward-sealing Intertap faucets and all-stainless 50-foot draft coils, the KOMOS Jockey Box was designed from the ground up to keep your beer pouring with less foam for longer.
KOMOS Rubicon Jockey Box
100% stainless steel draft coils
Shanks & coils are custom designed for proper cooling and flawless pouring
The only draft box that uses stainless steel Intertap forward sealing faucets
Push-In coil design applies force toward shank connection to protect against shank and coil separation
Stainless Steel construction on all serving components means this box will last for years
Heavy-duty rotomolded Rubicon Cooler is virtually indestructible
High-density polyurethane insulation and compression lid for superior ice retention
Pairs perfectly with a KOMOS Connection Kit
Features:
37 Quart Rubicon Cooler
2 x 50’ Stainless Steel Coils (5/16” OD)
2 x Stainless Steel Faucet Shanks
2 x Stainless Steel Pass Through Shanks
2 x Stainless Steel Flanges
2 x Stainless Steel Forward Sealing Faucets
2 x Black Tap Handles
Jockey Box Specs:
23.25" L x 16.25" W x 16.5" H
35.3 lbs
