KegLand is a high quality homebrewing equipment brand based out of Australia. We offer a wide variety of their products, from BrewZilla all-in-one system and DigiBoil eletric kettles, to pumps and grain mills. KegLand beer products are an incredible value, as they combine quality craftsmanship with low prices!
KegLand
-
Replacement Eye Bolt Assembly for Boiler False Bottom | BrewZilla
Replacement eye bolt assembly that forms the pull ring on the BrewZilla boiler false bottom (pump filter). KegLand Part Number: KL13642
$4.39
-
High Temp Silicone Tubing | Reinforced | 7/8" ID
Reinforced silicone tubing offers higher temperature tolerances and chemical resistance while remaining flexible and easy to handle. Ideal for both cold side and hot side processes and high-pressure applications. Although braided, the tubing remains transparent to allow you to visually inspect the flow of liquids. The tubing inner diameter is slightly undersized at 22mm or 0.86". 0.86" (22mm) inner diameter 1.25" (32mm) outer diameter Odorless, tasteless and inert Polyester heat resistant fiber reinforcing braid Good electrical and weatherability properties Resists UV, Ozone, gases, and moisture Working Temperature: -76°F–500°F Working Pressure: 0-150 psi KegLand Part Number: KL25294
$96.99 - $267.99
-
KegLand Fruit Press | Wine Press | Replacement Bladder
Replacement bladder for the KegLand 40L stainless steel bladder press. KegLand Part Number: KL35088
$164.99
-
Plastic Sight Glass Lens | 3" Tri-Clamp | Transparent T.C. End Cap
Transparent tri-clamp end cap compatible with any 3" T.C. ferrule Heat resistant up to 392°F Excellent chemical and impact resistance Made from polyphenylsulfone (PPSU) plastic This sight glass lens is suitable for use with any 3" tri-clamp ferrule with a 3" clamp and gasket. Made of Polyphenylsulfone (PPSU) which offers the clarity of transparency of glass with a much higher shatter and heat resistance. This is a direct replacement part for the Pro Sight Glass Distillation Lid. PPSU is an excellent choice for components that are exposed to high temperatures (up to 392°F) and corrosive media due to its exceptional chemical resistance, as well as being extremely impact resistant, and with the added benefit of being see-through. KegLand Part Number: KL22071
$14.49
-
BrewZilla | DigiBoil | Replacement Stainless Lid Clamps | Set of 4
Replacement stainless steel lid clamps. These are direct replacement clamps for the DigiBoil and older generation BrewZillas.
$10.99
-
RAPT Fermentation Chamber | Replacement PCO1881 Insert
Replacement PCO1881 Insert for the RAPT Fermentation Chamber. The RAPT chamber can fit up to 4 inserts. KegLand Part Number: KL26437
$3.29
-
Dual Outlet Water Tap | RO Water | Carbonated Water
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Easily dispense both chilled and carbonated water from a single, elegant tap, making it a perfect match for any under-counter filtration or carbonation system The tap is designed to work seamlessly with various setups, including keg-based systems for chilled or sparkling water and compact under-counter units like the Benchy Sparkling Made from high-quality stainless steel, this tap is built to last and provides a clean, modern aesthetic that complements any kitchen or bar counter This dual-outlet stainless steel tap is perfect for dispensing cold filtered water, sparkling water, or ambient temperature water. It's a great choice for systems like the Benchy Sparkling or other filtered water and reverse osmosis (RO) setups. This tap is an ideal component for a variety of filtered water systems. We offer it specifically for customers who want to dispense chilled or chilled and carbonated water. Here are a few ways to use this tap to get chilled or sparkling water: For chilled water, simply place a ball lock keg in your fridge, run your mains water supply through the keg, and then into this tap. For chilled and sparkling water, you can use a carbonation reactor lid with a keg. This option lets you chill and carbonate water at the same time. For a complete under-counter solution, the Benchy Sparkling unit is an excellent choice. You can connect your mains water supply to this compact unit, and it will deliver chilled and carbonated water directly to this tap. Fits benches/counters up to 1.96" (50mm) thick. Includes 2 x Duotight 6.35mm push in fittings as standard for connecting to 4mm x 6.35mm PE Water Line. If you are using this with a Benchy Sparkling you will need to step the line up to 8mm. We would recommend this fitting down the line. (Do not attach to the barbs of the tap, they are too wide to fit without leaking.) KegLand Part Number: KL23917
$49.99
-
KegLand Ball Lock Quick Disconnect (QD) | Beverage Out | Stainless Steel | Barbed
304 cast stainless steel ball lock quick disconnect made for high-durability Black ring above the outer bushing to identify the QD for beverage use Compatible with all ball lock style homebrew kegs 1/4" barb connection This is a ball-lock type quick disconnect that is constructed from stainless steel for lifetime longevity. 1/4" barb. This QD is for the Bev Out side. See here for the Gas In QD. 2 1/8" H Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless. Kegland Part Number: KL02998
$18.99
-
PCO1881 Pressure Relief Valve Cap
Designed for use with the PCO38 Tapping Head. With female PCO1881 threads, it can also be used with the FermZilla Collection Container or Hop Bong Sight Glasses. NOTE: This is the cap only. It does not include a PRV. See below for the PRV that best suits your needs. Warning: Never exceed the pressure capabilities of your vessel. PRV's are not spunding valves! KegLand Part Number: KL20176
$4.39
-
Beer Faucet Shank | Tower Shank | Matte Black | Duotight Compatible Barb | Intertap® | NukaTap®
This tower shank with Matte Black finish matches perfectly with the NukaTap Stealth Bomber faucet and features a Duotight compatible tailpiece. The 1/4" barb pairs with the Duotight 6.35 mm x 8 mm reducer (DUO10), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 & D1718). The Duotight fitting is sold separately and can be found below under "You Might Also Need". Please note these shanks are not compatible with Perlick brand faucets. KegLand Part Number: KL20084
$16.49
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) x 3/4 in. BSP
Connect EVABarrier tubing to 3/4" male threads with this Monotight adapter. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL1388
$3.29
-
Retaining Circlip for Duotight Push-In Fittings - Pack of 10 - 9.5 mm (3/8 in.)
Duotight 9.5 mm OD retaining clip. Locks Duotight fittings in their closed position, making it impossible for any hose to escape. Pack of 10. KegLand Part Number: KL21678
$4.39
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) Tee
This Monotight tee piece is perfect for splitting water or gas lines. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL2194
$2.99
-
Flanged Tri-Clamp Gasket | EPDM | 3"
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone For 3" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both EPDM and Silicone. EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 3" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F KegLand Part Number: KL45216 Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.
$2.59
-
Silicone Stopper | 17.5mm x 22.5mm | With Hole
This versatile silicone bung is made from a food-grade, lead-free material, making it ideal for use with all food and beverages. It's the perfect size for sealing most standard beer bottles, making it a great option for micro and nano brewers. It also serves as a replacement airlock bung for the KegLand Bucket Buddy. Dimensions: Tapered Diameter: 17.5mm to 22.5mm (0.68" to 0.88") Hole Diameter: 9mm (0.35") KegLand Part Number: KL12638
$0.99
-
KegLand Quick Swivel Connector | 3/8" Straight Barb | 9.5 mm Duotight Compatible
This straight barb in 3/8" (9.5mm) OD is only compatible with the 1/2" KegLand Quick Swivel Connector Nut. Compatible with 9.5 mm Duotight fittings. Quick Swivel Nut sold separately. KegLand Part Number: KL31578
$3.99
-
KegLand Quick Swivel Connector | 1/2" x 1/4" Straight Barb | 6.35 mm Duotight Compatible
High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Fits all male 1/2" NPT and BSP fittings 6.35 mm Duotight compatible stainless steel barb tail The KegLand Stainless Steel Quick Connectors come with a heavy-duty silicone grip guard allowing comfortable and quick tool-free operation. Specs: Stainless steel and silicone construction Silicone O-ring seal is retained for perfect positioning but is easily cleaned or replaced 1/4" (6.35mm) OD barb tail KegLand Part Number: KL31608
$8.79
-
Temp Twister Lid for Bucket Buddy Fermenters | 65L
This flat lid with pre-drilled holes allows you to easily add a Temp Twister Cooling Coil to your 35L Bucket Buddy fermenter. It also has holes for your stopper & airlock (included with the Bucket Buddy) as well as a Thermowell so you can control the circulation of cooling solution with a Temperature Controller. The lid is also compatible with 65L BrewZillas and DigiBoils. If you're fermenting in the Bucket Buddy with built-in heating element, we recommend plugging the unit into the heating outlet of your temperature controller and leaving the power switch turned on. This will allow the temp controller to provide power to the unit only when heating is needed and it will cut the power as soon as you're back to your set temperature. Using the Bucket Buddy's controller to maintain the heating set temp and using a separate controller to maintain the cooling may result in heating and cooling cycling at the same time. NOTE: The pre-drilled holes are meant for specific sizes of Duotight bulkheads and the stopper included with the Bucket Buddy fermenter. All holes need to be occupied in order to protect your fermentation from outside contaminants. Depending on the placement of the Temp Twister, you might need to shorten the inlet/outlet tubes on the outside of the fermenter using a Pipe Cutter. Lid only. Other accessories must be purchased separately. You Will Also Need: Temp Twister Cooling Coil FermZilla Thermowell Temperature Controller KegLand Part Number: KL28110
$43.99
-
RAPT Fermentation Chamber | Wine Rack
Turn your RAPT Chamber into a highly specialized wine cellar. These shelves are suited to fit wine bottles and the larger champagne bottles. KegLand Part Number: KL25577
$21.99
-
Duotight Push-In Fitting | 9.5 mm (3/8") Stem x 7 mm (1/4") Barb
This handy part is what you need to connect one side into a standard 9.5 mm Duotight fitting and secure the other side with 1/4" ID tubing using a hose clamp over the tube. We have wide range of stainless stepless hose clamps that you can purchase here. The barb is slightly oversized at 7 mm (0.27") which should provide a tight seal with 1/4" tubing. KegLand Part Number: KL2591
$1.09
-
Flanged Tri-Clamp Gasket | Silicone | 2"
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections Silicone gaskets have a wide temperature range and are recommended for hot side applications For 2" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both Silicone and EPDM. Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 2" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F KegLand Part Number: KL44820
$2.49
-
Silicone Stopper | 20mm x 36mm | With Hole
This versatile silicone bung is made from a food-grade, lead-free material, making it ideal for use with all food and beverages. Dimensions: Tapered Diameter: 20mm to 36mm (0.78" to 1.41") Hole Diameter: 9mm (0.35") KegLand Part Number: KL12812
$1.99
-
BrewZilla | Replacement Malt Pipe Handle | 65L
Replacement malt pipe handle for the 65L BrewZilla. 3/8" thick. KegLand Part Number: KL29513
$16.49
-
Replacement Pump for BrewZilla | Gen 3 | 110V
Replacement internal pump for 110-120V Gen 3 BrewZillas. Comes with bare wire. KegLand Part Number: KL05463
$87.99
-
Duotight Push-In Fitting | Reducer Elbow | 8 mm (5/16") x 6.35 mm (1/4") Screw Lock
This Duotight elbow is mainly used where a stronger connection is required on a rigid port. One side is a standard 8 mm Duotight connection and the other side is a compression adapted Duotight Screw Lock connection for 6.35 mm (1/4") rigid fittings. This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. KegLand Part number: KL24624
$3.69
-
Stout Spout | Matte Black Finish | Intertap® | NukaTap®
Simply unscrew the normal spout on a NukaTap or Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. Matches perfectly with the NukaTap Stealth Bomber faucet! For additional disc options, check out the 7-Disc Creamer/Aerator Kit. Stainless steel construction with matte black finish. Kegland Part number: KL21135
$14.49
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) x 1/2 in. BSP
Connect EVABarrier tubing to 1/2" male threads with this Monotight adapter. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL14038
$2.99
-
Flanged Tri-Clamp Gasket | EPDM | 4"
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone For 4" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both EPDM and Silicone. EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 4" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F KegLand Part Number: KL45209 Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.
$2.79
-
Stainless Tri-Clamp | 3 Piece | 4" Clamp
Double-hinged for easier handling when connecting tri-clamp fittings Textured tightening knob for better grip with wet hands Hang the clamp by the knob on a peg board when not in use This stainless steel tri-clamp features two hinges and folds into three pieces. Some brewers find this style of clamp easier to work with on large equipment that requires a 4" clamp. KegLand Part Number: KL32902
$16.99
-
Stainless Bucket Fermenter | Replacement O-ring for Racking Arm
Replacement o-ring for the racking arm included with the KegLand Bucket Buddy stainless fermenter. Single o-ring. If you are replacing both o-rings, you will need to order 2. KegLand Part Number: KL24754
$2.19
-
Duotight Mini CO2 Regulator | CGA320 Adapter for CO2 Tanks
Seamless Integration: Specifically designed to bridge the gap between portable regulators and full-sized tanks. Leak-Proof Design: Includes a durable nylon washer to ensure a rock-solid, airtight seal every time. Ultimate Versatility: Compatible with both the Duotight Mini Regulator and the Core 360 Regulator. Looking to carry a massive CO2 supply without the bulk? Pair your duotight Mini Regulator with this high-quality adapter to connect directly to standard CGA320 CO2 tanks. Taking your kegged homebrew on the road has never been more convenient. Simply thread the adapter onto your regulator, then attach the assembly to your CO2 cylinder. It’s the perfect way to make your portable kegging setup even more versatile by utilizing larger, more economical gas sources. KegLand Part Number: KL42024
$9.99
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) Elbow
This Monotight elbow fitting will help routing gas or liquid lines in your kegerator or water filter setup. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL14052 Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL2194
$2.79
-
Duotight Push-In Fitting | 9.5 mm (3/8") Male Stem x 8 mm (5/16") Female Reducer
Seamless Conversion: Easily adapts 8mm EVABarrier tubing to any 9.5mm female Duotight fitting. Leak-Free Connection: Precision-engineered for a secure, airtight seal using standard Duotight push-fit technology. This reducer allows you to attach 8mm EVABarrier tubing to any 9.5mm female Duotight fitting. For example, if you already own 9.5mm Duotight QDs and wish to use them with 8mm OD tubing, this fitting will allow you to do so without needing to purchase all new QDs in 8mm. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. KegLand Part Numbers: KL42635
$2.99
-
Silicone Stopper | 32mm x 48mm | With Hole
This versatile silicone bung is made from a food-grade, lead-free material, making it ideal for use with all food and beverages. Dimensions: Tapered Diameter: 32mm to 48mm (1.25" to 1.88") Hole Diameter: 9mm (0.35") KegLand Part Number: KL12836
$4.99
-
Silicone Stopper | 20mm x 36mm | Solid
This versatile silicone bung is made from a food-grade, lead-free material, making it ideal for use with all food and beverages. Dimensions: Tapered Diameter: 20mm to 36mm (0.78" to 1.41") Solid stopper (no hole) KegLand Part Number: KL12829
$1.99
-
Silicone Stopper | 19.5mm x 28.5mm | With Hole
This versatile silicone bung is made from a food-grade, lead-free material, making it ideal for use with all food and beverages. Dimensions: Tapered Diameter: 19.5mm to 28.5mm (0.76" to 1.12") Hole Diameter: 9mm (0.35") KegLand Part Number: KL41669
$1.59
-
JoinTech Quick Disconnect (QD) | Auto Shutoff | Dry Break | Male QD x 1/2" Male BSPT
Prevents leaks and spills when disconnected, ideal for pressurized systems Handles both hot and sub-zero fluids, from hot transfers to sub-zero glycol mixtures (-40°F to 280°F) Made with high-strength, chemically resistant polyketone plastic body, 316 stainless steel spring, and EPDM O-ring for long-lasting performance JoinTech Connectors offer a premium quick-disconnect solution for high and low-temperature beverage handling. These fittings are suitable for a wide range of applications, from hot transfers to sub-zero glycol mixtures. The connectors feature an automatic shut-off valve that prevents flow when disconnected, making them ideal for hoses used with pumps or glycol systems. Features: Durable, UV-stable black design Automatic shut-off valve Vacuum rating of 60 psi Connections: JoinTech Male QD 1/2" Male BSPT Materials: Body: High-strength, chemically resistant polyketone plastic Spring: 316 stainless steel O-ring: EPDM Specifications: Operating pressure: Vacuum to 60 psi Temperature tolerance: -40°F to 280°F (-40°C to 138°C) Flow path: 3/8" KegLand Part Number: KL41096
$9.99
-
Perforated Pizza Peel | Square Peel | 12"
The quintessential tool for launching your pizza and removing it from the oven Rather than using a pizza spinner, the square peel can be used to remove the pizza while cooking and rotated by hand Perforations allow excess flour to fall off the pizza base so there's less chance of flour burning and smoking up your oven Perfectly sized for HIZO Pizza Ovens The main purpose of a perforated pizza peel is to get rid of excess flour from the pizza base. But why do you want to get rid of the flour? When you’re baking pizza on hot stone or steel, you don’t want flour on the baking surface because it burns. Fine wheat flours that are most commonly used for baking pizza burn at fairly low temperatures. It’s this flour that causes trouble. Dusting your pizza peel with semolina flour, which can handle higher heat better, can also help. Burnt wheat flour will make the oven smoky and will result in more cleaning work when you’re done baking. The burnt flour tends to stick and can be a real pain to get rid of. Especially on an unglazed pizza stone. And if you’re not able to clean the stone properly, the flour can keep smoking next time you use the stone. Less Contact Surface – Less Sticking A perforated peel has a smaller surface that is in contact with the pizza dough. This means pizza is less likely to stick to a perforated pizza peel. The reason is that the larger the contact surface is, the more friction there will be between the peel and the pizza. And more friction means it is more likely to stick. A smaller contact surface also means that you’ll need less flour when you’re dusting the peel. As noted above, you want as little flour as possible in the hot oven. So in addition to removing more flour from the dough itself, the peel need less flour due to the holes. Perforated pizza peels are also lighter than solid pizza peels, due to less metal on the carrying surface. This will make it easier to use the peel. Less Condensation – Crispier Pizza Crust When you take a hot pizza out of the oven, you may have noticed that water sometimes is formed under the pizza. This moisture makes the pizza less crispy, or even soggy. Using a solid pizza peel may create condensation when the hot pizza meets the cold (room temperature) surface. This is mostly a problem with metal peels since hot air is trapped between the pizza crust and the smooth carrying surface. Condensation happens when this hot air is cooled down to a certain point (it’s dew point), and water drops are created. When you’re using a perforated pizza, on the other hand, you will experience less condensation. The reason is that the holes let the hot air escape through the peel. 12" Square x 31" Long Lightweight aluminum construction. Phillips Head screwdriver required for assembly. KegLand Part Number: KL21869
$54.99
-
Replacement Pump for BrewZilla | Gen 3 | 220V
Replacement internal pump for 220-240V Gen 3 BrewZillas. Comes with bare wire. KegLand Part Number: KL03834
$87.99
-
Kegland Equipment Hangers | Adhesive with Stainless post | 4 Pieces
Perfect for mounting Kegland RAPT Cannular Can and Bottle Filler (CAN250), RAPT Temperature Controller (FE971), and Gauge Guard for CO2 Regulators (D1082 & D1175A) Can be used to hang any equipment that has keyhole style cutouts or circular holes for hanging with screws High-quality stainless steel posts resists corrosion in humid brewing environments. Perfect for mounting regulators, manifolds, or tools inside fridge walls where coolant lines might be hidden. Designed for brewers who value a clean, organized workspace, these hangers provide a sturdy mounting point for various draft appliances and accessories without the need for drilling. Particularly useful for some kegland hardware, you can also use these to hang a draft tool, adjustable wrench, etc. Installation Best Practices To ensure a permanent, high-strength bond, please follow these guidelines: Prep the Surface: Thoroughly clean the mounting area with isopropyl alcohol to remove any oils or dust. Temperature Matters: If installing inside a kegerator or keezer, ensure the unit is turned off and at room temperature. The adhesive will not cure properly in cold or damp conditions. Let it Set: For maximum hold, allow the adhesive to cure for at least 24 hours before hanging any equipment or attaching hoses. Most Commonly Used With: RAPT Cannular Can and Bottle Filler (CAN250) RAPT Temperature Controller (FE971) Gauge Guard for CO2 Regulators (D1082 & D1175A) KegLand Part Number: KL50715
$8.99
-
EVABarrier Double Wall Draft Tubing | LightShield Black | 6.3 mm ID x 9.5 mm OD
Easily identify gas and beverage lines with color-coded options—LightShield Black for beverages, Transparent Red for gas EVABarrier's double-walled design with a proprietary inner polymer significantly reduces oxidation and CO2 loss, keeping your beer fresher for longer The ultra-smooth, nearly impermeable inner surface of the tubing prevents bacteria and microbes from adhering, ensuring cleaner beer lines The stiff yet pliable EVA outer barrier makes the tubing kink-resistant and ideal for use with push-in fittings like Duotight and John Guest 6.3 mm ID size is recommended for long draw beverage lines 20-25 ft. in length Easily identify your gas and beverage lines with color-coded draft tubing. LightShield Black EVABarrier is recommended for beverage lines while using Transparent Red for your gas lines, saving you a headache when your draft lines inevitably get tangled up in your draft system. LightShield Black also works perfectly for hydroponic systems as it will block UV and discourage algae growth. If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. The 6.3 mm (1/4") ID size is recommended to be used as gas line or long draw beverage lines. If you intend to use it as beverage line, we recommend using 20-25 ft. per line for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line. With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized. EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 6.3 mm (1/4") Outer Diameter - 9.5 mm (3/8") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. KegLand Part Number: KL42772
$39.49 - $260.99
-
Replacement Shuttles for NukaTap® Flow Control Faucet | Gen 2 | Backwards Compatible Retrofit Upgrade Kit
Replacement flow control shuttles for the Gen 2 NukaTap Flow Control faucet. These pieces are only for the flow control apparatus in the faucet, not the NukaShuttle itself. These pieces are backwards compatible with the Gen 1 NukaTap Flow Control model, replacing part numbers 11 and 12 in the diagram image above. KegLand Part Number: KL17817
$6.59
-
KegLand Cold Plate | 2 Lines
The KegLand Aluminum Cast Cold Plate features an impressive thermal mass with excellent heat absorption characteristics. High conductivity aluminum alloy aids the heat transfer as your beverage travels through the internal stainless steel lines. Inlets and outlets come with standard 1/4" male flare thread so you can easily attach swivel nuts and barbs or Duotight adapters. If you're making a jockey box for backyard cookouts, tailgaters, or camping trips, we highly recommend cold plates over draft coils. Cooling plates are perfect in low volume applications where space is an issue, and the low-profile design leaves plenty of room to store other food or beverages. If you're looking to serve beer at a festival or wedding where the beer might be constantly flowing, we would recommend stainless coils like those featured in the KOMOS Draft Box. Performance Characteristics: With 68°F ambient beer temp, flow rate through the cold plate of 10oz/10 seconds, and 70% coverage of ice in contact with the cold plate, you will be able to reduce the temperature of the liquid as it exits the cold plate to below 39°F with a single pass. If your beer is warmer than 82°F, we would recommend either slowing your flow rate through the cold plate or alternatively loop the two beverage lines together so the liquid passes through the cold plate twice. Specs: Aluminum cast 18 ft. internal lines made from 304 stainless steel 1/4" male flare connections 15" L x 10" W x 1" Thick (2.75" tall at inlet/outlet) Pre-drilled mounting holes Recommended serving pressure - 20-30 psi KegLand Part Number: KL04701
$149.99
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) Tee
This Duotight tee fitting is compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07023
$3.69
-
Beer Faucet Shank | Stainless | 6" | Intertap® | NukaTap®
Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. When set in place, the shank will only have about 4-1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 7-1/8" - Total Length (Tip to Tip) 6" - Shank Length (Without Nut & Barb) 5" - Thread Length 4-1/2" - Pass Through Length Kegland Part number: KL01120
$43.99
-
Replacement Internal Seal for Stainless Steel Ball Lock Caps - 5 Pack
Replacement internal seal for Stainless Carbonation and Line Cleaning Ball Lock Quick Disconnects. Only the stainless steel ball lock caps require these seals (KG50 & KG502). They are not needed for the Red & Yellow plastic versions. Comes in pack of 5. KegLand Part Number: KL21272
$2.19
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 9.5 mm (3/8 in.) Male Elbow
This elbow fitting has a 9.5 mm Duotight connection and a Duotight-compatible 3/8" OD barb. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18432
$2.99
-
Flanged Tri-Clamp Gasket | Silicone | 8"
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections Silicone gaskets have a wide temperature range and are recommended for hot side applications For 8" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both Silicone and EPDM. Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 8" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F KegLand Part Number: KL44790
$4.99
You have seen 432 out of 534 products