KegLand is a high quality homebrewing equipment brand based out of Australia. We offer a wide variety of their products, from BrewZilla all-in-one system and DigiBoil eletric kettles, to pumps and grain mills. KegLand beer products are an incredible value, as they combine quality craftsmanship with low prices!
Perfect for serving your craft creations on the go or making a compact home draft system that fits inside your refrigerator
Welded from the inside out using a specialized technique for superior, more sanitary welds compared to similar mini kegs
Interlocking chimes for easy and secure stacking of multiple mini kegs
KegLand's Small Stainless Steel Mini Beer Kegs are ideal for homebrewing small batches and serving your craft creations directly from your home fridge. These compact kegs are designed for convenience and versatility.
Flexible Dispensing and Carbonation
You can naturally carbonate your beer using priming sugars or, for a more controlled approach, force carbonate and serve with the Ball Lock Tapping Head. The Tapping Head features a flexible silicone dip tube, allowing you to dispense beer whether the keg is standing upright or lying on its side. The dip tube will sink and draw liquid from the bottom, allowing you to orient the keg whichever way is more convenient in your refrigerator.
Superior Quality and Durability
KegLand's mini kegs are built to last, undergoing acid bath electrolysis to passivate the stainless steel, making them exceptionally resistant to rust. These are the only mini kegs on the market that are welded from the inside out using a specialized technique. This results in a superior, more sanitary welding finish compared to other mini kegs. When you choose a KegLand mini keg, you're investing in the highest quality available, surpassing the standards of other mini kegs of similar design.
Low2 Lid O-Ring
The sealing cap features an O-ring made of KegLand's special Low2 material which offers vastly improved oxygen barrier properties compared to silicone or EPDM, resulting in your beverage staying fresher for longer.
Expand Your Setup with Accessories
Enhance your mini keg experience with a range of available accessories, including neoprene jackets for insulation and compact tapping systems for easy dispensing.
Stackable with the 8L and 10L Mini Keg.
Specs:
5L / 1.3 Gal / 169 fl oz
11" High x 6.8" Diameter (280mm x 175mm)
Max Working Pressure: 45 PSI / 3 Bar
Made from 304 Stainless Steel
KegLand Part Number: KL06361
304 cast stainless steel ball lock quick disconnect made for high-durability
White ring above the outer bushing to identify the QD for gas use
Compatible with all ball lock style homebrew kegs
1/4" barb connection
This is Ball Lock Quick Disconnect is constructed from stainless steel for lifetime longevity. 1/4" barb.
This QD is for the Gas In side.
2-1/8" H
Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless.
Kegland Part Number: KL02981
This Duotight plug is used to block up your 9.5 mm (3/8") tees, elbows or other fittings for gas leak testing or simply to plug an unused section.
Features:
Insert plug and firmly push to connect
Release plug by pushing in the collet on the Duotight fitting
Suitable for both gas & beverage applications
Made from food-grade acetal plastic
Temperature rated to 212°F (100°C)
Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
Kegland Part number: KL06965
Maximize the purity of your distillate with high density spiral prismatic packing
Prismatic spiral shape designed to maximize surface area
Large spiral prismatic packing recommended for 4" diameter or larger columns
Take your distillation to the next level with super high density spiral prismatic packing. The packing maximizes the purity of the collected distillate from your reflux still, ensuring the best possible product is collected. The prismatic spiral shape is designed to maximize its surface area helping to separate out fractions in your reflux, resulting in a highly pure and neutral end product. It is not recommended for use with pot stills when producing flavored spirits.
Large spiral prismatic packing is recommended for 4" diameter or larger columns. Standard size packing is recommended for smaller columns home-sized columns.
Note: We recommend soaking and washing the SPP before its first use with a 50:50 mix of vinegar or citric acid and warm to hot water to remove all manufacturing oils.
Sizing: The SPP is approximately 3.58mm x 5.81mm.
KegLand Part Number: KL32704
Elevate your brewing game with the 220V 26 Gallon Gen 4 BrewZilla. This cutting-edge system combines more power & capcity with innovative features like wireless connectivity via WiFi & Bluetooth, allowing you to heat faster while you control and monitor your brew day, ensuring precision, convenience, and exceptional beer batch after batch!
WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal
The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench
Mirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter
Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency
Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp
The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve
Pair with the RAPT-enabled Bluetooth Thermometer, allowing your BrewZilla to calculate a core mash temperature reading and more accurately control temperatures and mash steps
More RAPT-enabled accessories are coming, and future firmware updates can be downloaded to the RAPT Controller itself over the internet
WiFi/Bluetooth Enabled RAPT Controller
The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen.
But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability.
And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer!
But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings.
Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road.
Concave Base with Center Draining
Leave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind.
Ultra Low Watt Density Elements
The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy.
Heat Exchanger Dish
The 100L BrewZilla comes standard with the Heat Exchanger Dish which redirects the flow of wort so that it spends more time exposed to the heating elements before reaching the center drain at the bottom of the kettle and being recirculated. Due to the concave bottom and central draining hole on the Gen 4 BrewZilla, recirculating wort will pass through the malt pipe and then down through the boiler false bottom following the path of least resistance. This can cause wort to make a B-line for the drainage hole and reduce the wort's exposure to the unit's heating elements. With the HED installed, wort will be directed to the edge of the BrewZilla base and pass over the elements for a longer period and reduce the time needed to heat to your set temperature. An optional accessory for the smaller units, but included as standard on the 100L BrewZilla.
Easy Access Built-In Pump
The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet.
If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer.
MoreBeer!'s Final Word
We’ve been selling all-in-one brewing systems ever since they first hit the market, and we have to say that the Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included.
Features:
Gen 4.1
Stainless steel construction
26.4 gallon total capacity with a finished beer output of 15-20 gallons
WiFi/Bluetooth Enabled RAPT digital temperature controller
Automatic step mashing with 6 programmable stages
220-240V power
NEMA L6-30P Plug
Requires NEMA L6-30R receptacle
Draws 30 amps. Ask your electrician if you need to oversize the circuit
(3) 2,200W heating elements
Stainless steel 1/2" ball valve for gravity draining or transferring via pump
Heat exchanger dish included
Stainless steel malt pipe/basket
Stamped in volume markers
Glass lid
Adjustable lid clamps (do not use with glass lid in place - see below)
Magnetic drive pump for recirculation, transfers, and cleaning
Recirculation arm
PPSU sight glass
Bottom handle for easy lifting and pouring
Rubber feet
Temperature reads in °F or °C
Approximately 36" H (with recirculation arm) x 20.5" D (boiler only)
Recommended max. grain bill: 41.5 lbs
AlcoEngine Still ready with the purchase of a Distillation Lid
Pump Specs:
Max Capacity: 5 gal/min
Max Head: 11.15 ft.
Voltage: 220–240V-AC
Frequency: 50–60Hz
Power: 25 watts
Input/Output: 13mm barb
You Will Need:
2' of H985 1/2" ID Silicone tubing for sparging and draining.
Wort Chiller for cooling
We recommend either of the below counterflow chillers
Copper Counterflow Chiller (WC130)
BrewBuilt® Stainless Tri-Clamp Counterflow Chiller (WC140)
KegLand Part Number: KL32803
Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos.
Please Note: When removing the malt pipe to drain after mashing, it is important to do so slowly rather than in one swift pull. If the malt pipe is removed all at once when it is full of wort, it is possible for the draining wort to spray out and over the rim of the brewery through the perforated bottom. Remove the malt pipe slowly so that some of the wort can drain out before it is fully removed and set on its bottom feet. This can be done by hand on the 35L unit, but for the 65L and 100L units we highly recommend using the Pulley System for removing the malt pipe.
Warning: Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. With too much tension, it is possible for the lid clamps to break the glass lid when engaged.
Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use.
35L (110V)
35L (220V)
65L (220V)
100L (220V)
10 ft.
14 Gauge
14 Gauge
12 Gauge
10 Gauge
25 ft.
14 Gauge
14 Gauge
12 Gauge
10 Gauge
50 ft.
12 Gauge
12 Gauge
10 Gauge
8 Gauge
RAPT Gen 4 BrewZilla | User Manual
Instant and infinite sparkling water at your fingertips whenever you want it! Benchy connects to your household's water supply, chills, carbonates, and delivers on demand Serve up to 8 gallons of chilled, carbonated water per hour Pair with draft faucets and place it on your counter, or install it under the counter and plumb it to a mounted water faucet See below for detailed installation video Benchy Sparkling is the answer for instant chilled and carbonated water on demand. Simply connect your household water supply and CO2 Cylinder to the unit and receive unlimited sparkling and chilled water from the draft faucets. The chiller is highly efficient with very little power draw while idle and has enough cooling capacity to serve up to 8 gallons of sparkling water per hour. This unit comes without shanks or draft faucets, as it can be used as a countertop unit or installed under your counter and routed to a faucet you install on your counter or kitchen sink. If you plan to use it as a countertop unit, we highly recommend NukaTap Flow Control Faucets. Easy Installation: Plug the Benchy into the wall Fill internal water tank Connect household water supply Connect CO2 Cylinder Pour chilled sparking water. It's that simple and you can be enjoying chilled sparkling water in under 1 hour with this setup and barely any time at all to cool down. Ensure that the unit is installed and operated according to the instruction manual which can be found below. Fully Adjustable The Benchy Sparkling has an integrated digital temp controller so you can control the temperature from 0.5-10°C (33-50°F). You can also vary the carbonation level from 0.5 volumes to over 5 volumes for super bubbly water. Cooling Performance The Benchy Sparkling is able to chill about 5 to 8 gallons of sparkling water per hour (based on ambient water and air temperature of 68°F). To further increase the capacity of this unit, you can pre-chill the water from your household supply line either by a holding tank (ball lock keg) in the fridge or a DraftMaster Chiller. If you pre-chill the water you can more than double the output of the Benchy Sparkling. The reservoir temperature on the Benchy should never be set below 2°C (35°F) as you will run the risk of freezing the water inside the carbonation keg. Specifications: 110V Refrigerant: r600a (80 grams) Cooling Power: 600 watts Power Consumption: 155 watts (idle power consumption less than 5 watts) Capacity: approximately 6.6 gal/hour (based on 68°F ambient temperature) Input Gas: CO2 @ 29-50 psi (Requires 8mm (5/16") OD tubing) Input Water: Must be 15 psi higher than gas pressure (Requires 6.35mm (1/4") OD tubing) Sparkling/Chilled Water Out: Requires 8mm (5/16") OD tubing Dimensions: 18.3" H x 11.4" W x 20.5" D (Excluding sight glass that can be removed) Recommended Accessories: CO2 Gas Cylinder CO2 Regulator EVABarrier 4mm x 8mm Tubing PE Water Line Tubing 6.35mm Duotight In-Line Regulator (0-150 psi) Duotight Reducer - 8mm x 6.35mm 8mm Duotight Check Valve Diverter Valve (check water line connection for the size you'll need) Countertop Installation Recommended Accessories: (2) Short Shanks & Hex Nuts (2) Duotight Adapters - Beer Thread x 8mm (2) NukaTap FC Faucets& Self Closing Springs (2) Tap Handles (of your choice) Tube Cutter Faucet & Shank Wrench KegLand Part Number: KL2068
This stainless steel shuttle can be used to replace the TPV rubber NukaShuttle that comes standard in the NukaTap beer faucet. For users that prefer stainless internal mechanisms in their faucet. You will need to remove the bonnet piece at the handle, pull the handle out and then slide the shuttle piece out.
Compatible with all NukaTap faucets, including Gen 2 Flow Control.
KegLand Part Number: KL35958
Connect EVABarrier tubing to 1/2" male threads with this Monotight adapter. Compatible with EVABarrier 8 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18753
Designed to streamline your labeling process, saving you time and effort. Apply self-adhesive labels quickly and efficiently.
Adapts to various sizes and shapes, making it suitable for labeling bottles, cans, jars, or other containers
Accurate and Precise: Achieve professional-looking results every time with consistent label placement and adherence
For some homebrewers, the most satisfying aspects of the brewing process is when you hand someone a bottle or can of your latest creation. At this point, presentation is everything, and that begins with a beautifully packaged beer. Using a 3rd party, you can design your very own adhesive labels for bottles or cans, then apply them with perfection using KegLand's Semi-Auto Label Applicator.
This semi-automated compact label applicator machine is suitable for bottles, jars or cans of up to 160mm diameter and is fully adjustable for labeling any cylindrical container. Apply self-adhesive labels to your beer, wine or spirits quickly and easily.
Specifications:
Power: 110V 60Hz
Min Label Thickness: 5μm (0.005 mm)
Max Label Height: 150 mm (5.9")
Max Label Length/Width: 300 mm (11.8")
Max Label Roll Diameter: 280mm (11.02")
Max Label Roll Inside Diameter: 76mm (2.99")
Max Vessel Diameter: 160 mm (6.2")
Label Applicator Speed: 1–3 seconds (varies by label length)
Approx. Dimensions: 21.6" L x 9.8" W x 13.7" H
KegLand Part Number: KL18326
This false bottom is specifically designed for the Gen 4 35L BrewZilla. On this model the ball valve tap was relocated underneath the unit, allowing for a super low profile false bottom that molds itself to the concave bottom of the BrewZilla. This also allowed for a larger malt pipe for bigger grain bills and provides a filter for protecting the easy access pump.
It is not suitable for DigiBoils or Gen 3.1.1 or older BrewZillas, as those models do not have a concave bottom.
Includes 2x Eye Bolt Assemblies.
KegLand Part Number: KL27304
If you like serving out of commercial kegs but prefer the ease of using ball lock fittings in your draft system, this adapter is for you. Instead of buying additional keg couplers and beer thread to ball lock adapters, you can use this tapping head to go straight from sanke keg to ball lock. To install, remove the keg spear, place the gasket on the keg ferrule with the beaded side facing up, attach the silicone dip tube and place the tapping head on the ferrule, then secure with the 2" tri-clamp.
Be sure to always depressurize the keg before removing the tapping head.
Includes:
Ball Lock Post Lid
2" tri-clamp
Single-side beaded tri-clamp gasket
60 cm silicone dip tube (23.6")
Red 2.5 bar PRV (36 psi)
KegLand Part Number: KL10610
Comfortably holds individual dough balls for easy management Tight-fitting lid retains moisture and prevents drying Stackable design maximizes refrigerator space Tired of messy countertops and awkwardly shaped containers when proofing your pizza dough? This durable and thoughtfully designed Pizza Dough Box with Lid is the perfect solution for any home pizza enthusiast. Sized for convenience, this box comfortably holds individual dough balls for your favorite pizza recipes. The generous depth allows for proper rising without the dough overflowing. The box body and box lid are also available for purchase separately. Features: Optimal Size: Perfectly sized to accommodate individual pizza dough portions, making it easy to manage and transfer dough. Secure Lid: The tight-fitting lid creates the ideal environment for proofing, retaining moisture and preventing the dough from drying out or forming an unwanted skin. Stackable Design: Maximize your refrigerator space! Designed to neatly and securely stack multiple boxes, keeping your fridge organized and your dough separated. Versatile Use: Not just for pizza dough! This box is also great for storing other types of dough, like bread rolls or focaccia. Dimensions: 17.5" Long x 12.5" Wide x 3.25" Deep KegLand Part Number: KL41645
Replacement probe for the RAPT Bluetooth Thermometer (MT409). The cord is 39" long with a 7.8" long probe probe with sharp tip. Please remove the black plastic tip before use. That is for storage to avoid punctures / injury. KegLand Part Number: KL29445
Replacement RAPT Controller for 35L Gen 4 BrewZillas. Compatible with all Gen 4 models. This will not work with BrewZilla Gen 3.1.1 models or older. It is also not suitable for DigiBoil units.
Please refer to the instruction manual on adjusting the controller between the Gen 4 units. There is a mechanical toggle switch on the back of the board that will need to be adjusted.
KegLand Part Number: KL20305
Ready to dive into distilling, but unsure how to piece together your home still? Check out these complete systems that will set you on the path to producing high quality spirits. This kit comes with the 65L DigiBoil Electric Kettle and the Copper Pot Still Condenser. The Copper Pot Still is perfect when you want the flavor of the wash to come through, whereas a reflux still is more favorable for producing pure, unflavored spirits. If you want to make whiskeys and gins, this pot still top is a great way to start! The classic "V" shape captures the vital esters, aldehydes, and phenolic compounds that are necessary for the complex spirits such as whiskeys and gins. Made from solid copper. When your hot spirit comes into contact with the copper, the copper acts like a catalytic converter to drive sulfur out of the spirit. This leads to less off-flavors and higher quality spirit. Kit Includes: 65L DigiBoil (220V) Copper Pot Still w/ Barb Connections Distillation Lid w/ Gasket Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. MoreBeer! is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). NOTE: Due to the size of this item, it is not eligible for international shipping.
Perfect for serving your craft creations on the go or making a compact home draft system that fits inside your refrigerator
Welded from the inside out using a specialized technique for superior, more sanitary welds compared to similar mini kegs
Interlocking chimes for easy and secure stacking of multiple mini kegs
KegLand's Small Stainless Steel Mini Beer Kegs are ideal for homebrewing small batches and serving your craft creations directly from your home fridge. These compact kegs are designed for convenience and versatility.
Flexible Dispensing and Carbonation
You can naturally carbonate your beer using priming sugars or, for a more controlled approach, force carbonate and serve with the Ball Lock Tapping Head. The Tapping Head features a flexible silicone dip tube, allowing you to dispense beer whether the keg is standing upright or lying on its side. The dip tube will sink and draw liquid from the bottom, allowing you to orient the keg whichever way is more convenient in your refrigerator.
Superior Quality and Durability
KegLand's mini kegs are built to last, undergoing acid bath electrolysis to passivate the stainless steel, making them exceptionally resistant to rust. These are the only mini kegs on the market that are welded from the inside out using a specialized technique. This results in a superior, more sanitary welding finish compared to other mini kegs. When you choose a KegLand mini keg, you're investing in the highest quality available, surpassing the standards of other mini kegs of similar design.
Low2 Lid O-Ring
The sealing cap features an O-ring made of KegLand's special Low2 material which offers vastly improved oxygen barrier properties compared to silicone or EPDM, resulting in your beverage staying fresher for longer.
Expand Your Setup with Accessories
Enhance your mini keg experience with a range of available accessories, including neoprene jackets for insulation and compact tapping systems for easy dispensing.
Stackable with the 4L Mini Keg.
Specs:
2L / 0.52 Gal / 67 fl oz
7.6" High x 5.3" Diameter (195mm x 135mm)
Max Working Pressure: 45 PSI / 3 Bar
Made from 304 Stainless Steel
KegLand Part Number: KL06347
The NukaTap FC is the world's only forward-sealing flow control tap that can use an auto close spring. By inserting the spring between the flow control device and NukaTap shuttle, the tap will automatically close when you let go of the handle. This is perfect for customers who may not be diligent enough to remember to completely turn off the tap after each pour. Or for those with little kids or pesky cats that knock everything around! This very inexpensive spring can save you from emptying an entire keg and then losing a whole bottle of gas.
Please note: this spring is not compatible with the standard non-flow control NukaTap faucet or the NukaTap Flow Control G2.
KegLand Part Number: KL17985
This Duotight joiner fitting is compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design:
The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary!
We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features:
Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07016
This Duotight to Female Beer Thread (5/8" BSP) fitting is perfect for connecting gas line to keg couplers. Although it could be used with 9.5 mm EVA Barrier as a beverage line, this would only be recommended for long draw systems where the beverage line will be 20-25 ft long. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design:
The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary!
We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Compatible with EVABarrier 9.5 mm OD tubing (D1719). This Duotight fitting with 5/8" FPT is perfect for connecting gas line to keg couplers. Although it could be used with 9.5 mm EVA Barrier as a beverage line, this would only be recommended for long draw systems where the beverage line will be 20-25 ft long. Features:
Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Keg coupler not included. Kegland Part number: KL06910
The Duotight Elbow Piece is suitable for 6.35 mm (1/4") PE tubing or most lines with a 6.35 mm outer diameter. Designed for use with stiff PE tubing that is commonly used in water treatment equipment, water filters, reverse osmosis fittings, and other appliances that are directly connected to water lines.
Duotight push in fittings have been engineered for maximised performance in both gas and liquid applications. No other push ins on the market have EPDM o-rings.
Features:
Insert tubing and firmly push to connect
Easily release tubing by pushing in the collet
Suitable for both gas & beverage applications
Made from food-grade acetal plastic
O-ring made from highly chemical resistant EPDM
Locking teeth made from stainless steel
Pressure rated to 150 psi
Temperature rated to 212°F (100°C)
Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
Kegland Part number: KL18449
Replacement Rocker Switch for BrewZilla / DigiBoil. Compatible with all DigiBoils and Gen 3.1 or older BrewZillas.
Compatible with 110-120V and 220-240V.
KegLand Part Number: KL05968
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections
Silicone gaskets have a wide temperature range and are recommended for hot side applications
For 3" tri-clamp connections
A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time.
Available in both Silicone and EPDM.
Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets.
For 3" tri-clamp fittings
Made from Silicone
Temperature rated from -58°F to 446°F
KegLand Part Number: KL44813
Prevents leaks and spills when disconnected, ideal for pressurized systems
Handles both hot and sub-zero fluids, from hot transfers to sub-zero glycol mixtures (-40°F to 280°F)
Made with high-strength, chemically resistant polyketone plastic body, 316 stainless steel spring, and EPDM O-ring for long-lasting performance
JoinTech Connectors offer a premium quick-disconnect solution for high and low-temperature beverage handling. These fittings are suitable for a wide range of applications, from hot transfers to sub-zero glycol mixtures.
The connectors feature an automatic shut-off valve that prevents flow when disconnected, making them ideal for hoses used with pumps or glycol systems.
Features:
Durable, UV-stable black design
Automatic shut-off valve
Vacuum rating of 60 psi
Connections:
JoinTech Female QD
13mm barb (0.51")
Materials:
Body: High-strength, chemically resistant polyketone plastic
Spring: 316 stainless steel
O-ring: EPDM
Specifications:
Operating pressure: Vacuum to 60 psi
Temperature tolerance: -40°F to 280°F (-40°C to 138°C)
Flow path: 3/8"
KegLand Part Number: KL41102
Controller mounting bracket for the Gen 4 BrewZillas. Mount your controller up to 5 ft. away with the RAPT Screen Extension Cable (AG547). KegLand Part Number: KL32698
This handy part is what you need to connect one side into a standard 6.35 mm Duotight fitting and secure the other side with 3/16" ID tubing using a hose clamp over the tube. We have wide range of stainless stepless hose clamps that you can purchase here. KegLand Part Number: KL25928
Slip one of these ice wraps between your homebrew keg and a neoprene sleeve to keep your keg cold for hours! Two wraps will completely cover a 5-gallon corny keg. The cooling gel sheets are made up of individual cells, so you can cut the wraps into custom shapes and sizes if desired. For fermentation temperature control, these ice wraps work great as a cooling source. If you're using a cooler bag for fermentation, simply put one or two of these in with your carboy to keep temperatures in check. Or pair with a FermWrap and temperature controller, and you've got a heated and cooled temperature control system that will keep fermentation within 1°F of your set point! Made from durable vinyl that remains soft when freezing cold Burst and puncture resistant Can easily be cut to smaller size 10 x 6 cells 13.75" tall x 16.5" wide x 3/8" thick Kegland Part Number: KL12553
Get all of the amazing features and functionality out of your Intertap faucet! This kit includes all of the accessories that can be paired with the Stainless Steel Intertap forward sealing faucet. Whether you want to fill a growler or pour a stout, this faucet does it all. Everything you need to dispense from and maintain your Intertap faucet! This Kit Includes: Stainless Steel Intertap Beer Faucet (D1210) Intertap Stout Spout (D1213) Intertap Growler Filler Spout (D1214) Intertap Ball Lock Spout (D1217) Intertap Self-Closing Faucet Spring* (D1212) Intertap Seal & Gasket Kit (D1215) *Does not include shank.
Comes with a back nut, plastic collar, hex nut, and 8 mm Duotight Adapter compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Requires a 1" hole saw for installation. When set in place, the shank will only have about 4-1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 7-1/8" - Total Length (Tip to Tip) 6" - Shank Length (Without Nut & Barb) 5" - Thread Length 4-1/2" - Pass Through Length Kegland Part number: KL11952
This straight barb in 5/16" (8mm) OD is only compatible with the 1/2" KegLand Quick Swivel Connector Nut. Compatible with 8 mm Duotight fittings. Quick Swivel Nut sold separately. KegLand Part Number: KL31561
The quintessential tool for launching your pizza and removing it from the oven
Rather than using a pizza spinner, the square peel can be used to remove the pizza while cooking and rotated by hand
Perforations allow excess flour to fall off the pizza base so there's less chance of flour burning and smoking up your oven
Perfectly sized for HIZO Pizza Ovens
The main purpose of a perforated pizza peel is to get rid of excess flour from the pizza base. But why do you want to get rid of the flour?
When you’re baking pizza on hot stone or steel, you don’t want flour on the baking surface because it burns. Fine wheat flours that are most commonly used for baking pizza burn at fairly low temperatures. It’s this flour that causes trouble. Dusting your pizza peel with semolina flour, which can handle higher heat better, can also help. Burnt wheat flour will make the oven smoky and will result in more cleaning work when you’re done baking. The burnt flour tends to stick and can be a real pain to get rid of. Especially on an unglazed pizza stone. And if you’re not able to clean the stone properly, the flour can keep smoking next time you use the stone.
Less Contact Surface – Less Sticking
A perforated peel has a smaller surface that is in contact with the pizza dough. This means pizza is less likely to stick to a perforated pizza peel. The reason is that the larger the contact surface is, the more friction there will be between the peel and the pizza. And more friction means it is more likely to stick.
A smaller contact surface also means that you’ll need less flour when you’re dusting the peel. As noted above, you want as little flour as possible in the hot oven. So in addition to removing more flour from the dough itself, the peel need less flour due to the holes. Perforated pizza peels are also lighter than solid pizza peels, due to less metal on the carrying surface. This will make it easier to use the peel.
Less Condensation – Crispier Pizza Crust
When you take a hot pizza out of the oven, you may have noticed that water sometimes is formed under the pizza. This moisture makes the pizza less crispy, or even soggy. Using a solid pizza peel may create condensation when the hot pizza meets the cold (room temperature) surface. This is mostly a problem with metal peels since hot air is trapped between the pizza crust and the smooth carrying surface. Condensation happens when this hot air is cooled down to a certain point (it’s dew point), and water drops are created. When you’re using a perforated pizza, on the other hand, you will experience less condensation. The reason is that the holes let the hot air escape through the peel.
14" Square x 31" Long
Lightweight aluminum construction. Phillips Head screwdriver required for assembly.
KegLand Part Number: KL21876
Replacement BrewZilla Gen 4 Power Circuit Board for the 35L, 65L and 100L model. Compatible with 110V and 220V models.
This will not work with BrewZilla Gen 3.1.1 models or below. It is also not suitable for DigiBoil units.
NOTE: There is currently no wiring diagram. This should only be installed as a replacement if an accident has occurred. Please consult a trained electrician who can assist you with fixing your BrewZilla.
KegLand Part Number: KL27724
Perfect for serving your craft creations on the go or making a compact home draft system that fits inside your refrigerator
Welded from the inside out using a specialized technique for superior, more sanitary welds compared to similar mini kegs
Interlocking chimes for easy and secure stacking of multiple mini kegs
KegLand's Small Stainless Steel Mini Beer Kegs are ideal for homebrewing small batches and serving your craft creations directly from your home fridge. These compact kegs are designed for convenience and versatility.
Flexible Dispensing and Carbonation
You can naturally carbonate your beer using priming sugars or, for a more controlled approach, force carbonate and serve with the Ball Lock Tapping Head. The Tapping Head features a flexible silicone dip tube, allowing you to dispense beer whether the keg is standing upright or lying on its side. The dip tube will sink and draw liquid from the bottom, allowing you to orient the keg whichever way is more convenient in your refrigerator.
Superior Quality and Durability
KegLand's mini kegs are built to last, undergoing acid bath electrolysis to passivate the stainless steel, making them exceptionally resistant to rust. These are the only mini kegs on the market that are welded from the inside out using a specialized technique. This results in a superior, more sanitary welding finish compared to other mini kegs. When you choose a KegLand mini keg, you're investing in the highest quality available, surpassing the standards of other mini kegs of similar design.
Low2 Lid O-Ring
The sealing cap features an O-ring made of KegLand's special Low2 material which offers vastly improved oxygen barrier properties compared to silicone or EPDM, resulting in your beverage staying fresher for longer.
Expand Your Setup with Accessories
Enhance your mini keg experience with a range of available accessories, including neoprene jackets for insulation and compact tapping systems for easy dispensing.
Stackable with the 5L and 8L Mini Keg.
Specs:
10L / 2.6 Gal / 338 fl oz
19.2" High x 6.8" Diameter (488mm x 175mm)
Max Working Pressure: 45 PSI / 3 Bar
Made from 304 Stainless Steel
KegLand Part Number: KL06385
This shank's small design makes it perfect for attaching a faucet to a tower. Included on the Intertap towers that we stock but can be used to replace the short shank on any 3" diameter tower. Made from stainless steel.
Please note these shanks are not compatible with Perlick brand faucets.
Kegland Part number: KL01090
Prevents leaks and spills when disconnected, ideal for pressurized systems
Handles both hot and sub-zero fluids, from hot transfers to sub-zero glycol mixtures (-40°F to 280°F)
Made with high-strength, chemically resistant polyketone plastic body, 316 stainless steel spring, and EPDM O-ring for long-lasting performance
JoinTech Connectors offer a premium quick-disconnect solution for high and low-temperature beverage handling. These fittings are suitable for a wide range of applications, from hot transfers to sub-zero glycol mixtures.
The connectors feature an automatic shut-off valve that prevents flow when disconnected, making them ideal for hoses used with pumps or glycol systems.
Features:
Durable, UV-stable black design
Automatic shut-off valve
Vacuum rating of 60 psi
Connections:
JoinTech Male QD
1/2" Barb
Materials:
Body: High-strength, chemically resistant polyketone plastic
Spring: 316 stainless steel
O-ring: EPDM
Specifications:
Operating pressure: Vacuum to 60 psi
Temperature tolerance: -40°F to 280°F (-40°C to 138°C)
Flow path: 3/8"
KegLand Part Number: KL50746
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections
EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone
For 2" tri-clamp connections
A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time.
Available in both EPDM and Silicone.
EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals.
For 2" tri-clamp fittings
Made from EPDM
Temperature rated from -30°F to 300°F
KegLand Part Number: KL45223
Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.
Teflon gasket with 304 stainless mesh screen for 3" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream.
The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket.
KegLand Part Number: KL28868
Upgrade your MKII Magnetic Drive Pump with a stainless steel pump head that quickly & easily installs via 3" tri-clamp T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy Stainless steel head with 1/2" threaded ports to attach your preferred fittings—tri-clamp, quick disconnect, camlock, and More!
Upgrade your MKII Magnetic Drive Pump with a stainless steel inline pump head! The TC Breakdown Brewing Pump Head provides several advantages over the standard MKII pump head, first and foremost being it's made of stainless steel instead of plastic. This allows for much easier installment of fittings without the risk of breaking off the plastic inlet or outlet. It will also convert the pump head from "Center Inlet" to "Inline" flow path which can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. But what some MKII users might find most exciting about this upgrade kit is that it converts the pump head connection to 3" tri-clamp! Not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use has never been easier—just pop off the tri-clamp, wash out the pump head, and clamp back on. This upgrade kit is only compatible with the 25-Watt MKII pump (PMP50). It will not fit the larger 65-Watt MKII or the Blichmann Engineering RipTide pump. If you don't already own the 25-Watt MKII, you can purchase it with the T.C. pump head already installed here. Tri-Clamp Pump Head The T.C. pump head can be removed quickly and easily using the 3" tri-clamp. This means no drivers or power drills are needed to back out the six Phillips head screws that mount the pump head on the standard version of the MKII. Whip the head off in a flash to clear out spent grain, hop material, or clear a blockage. Attaching the pump head with a tri-clamp also allows the head to be rotated at any angle in a full 360-degrees. This makes it easy to configure the plumbing to your unique brewery setup. Inline Design An "inline" pump head simply means the input and output are on a straight horizontal line with one another which can make it easier to integrate into your brewery setup. If you're using a 3-vessel horizontal system, the inline pump head will make it easier to keep your hoses neat and tidy compared to pumps heads with a center inlet. PRV Purge Valve The corny keg style PRV will make priming the pump a breeze. Simply let bleed the pump head to purge air out before turning the pump on and you'll avoid any cavitation issues. The PRV also acts as a safety so you do not over pressurize your pump head or brewery system. 304 Stainless Steel The entire pump head is made from 304 grade stainless steel so it's highly resistant to chemicals, heat, and physical abuse. The 1/2" BSP threaded ports can be used to attach barbs, quick disconnects, camlocks, tri-clamp adapters, or any other 1/2" fittings you prefer. KegLand Part Number: KL27267
Transparent tri-clamp end cap compatible with any 2" T.C. ferrule
Heat resistant up to 392°F
Excellent chemical and impact resistance
Made from polyphenylsulfone (PPSU) plastic
This sight glass lens is suitable for use with any 2" tri-clamp ferrule with a 2" clamp and gasket. Made of polyphenylsulfone (PPSU) which offers the clarity of transparency of glass with a much higher shatter and heat resistance.
PPSU is an excellent choice for components that are exposed to high temperatures (up to 392°F) and corrosive media due to its exceptional chemical resistance, as well as being extremely impact resistant, and with the added benefit of being see-through.
KegLand Part Number: KL25973
Super thick 8mm neoprene insulating jacket will keep your mini keg cold while you're on dispensing on the go
Heavy duty shoulder strap for easy transportation
Glow in the dark printed logo and high-vis strap for improved visibility after the sun has set
Pocket sleeves for extra 16g CO2 cartridges
The Mini Keg Parkas prioritize both insulation and portability. The 8mm neoprene insulating jacket keeps your beverage cold while dispensing. Features a glow-in-the-dark printing for improved visibility after dark, pocket sleeves for extra 16g CO2 cartridges, and heavy-duty shoulder strap for easy transportation.
Please Note: The 8L and 10L Mini Kegs share a parka size. If using it on the 8L Mini Keg, there will be a few inches of extra material at the top which you can leave as is or fold down if you prefer.
Compact Design: Ideal for tight spaces inside small refrigerators or keezers.
Versatile Routing: Use any port as the inlet to feed the remaining three outputs.
Easy Expansion: Pair with DUO102 plugs to customize the number of active lines.
The Duotight Cross Adapter works perfectly as a simple option for splitting gas lines. Insert your gas line to any of the 8mm Duotight connectors and route outgoing gas lines from the remaining three. If you do not need to use all three outgoing gas lines, simply plug the unused ends with a DUO102 8mm Plug.
High Performance Double O-Ring Design:
The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage.
The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market.
EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free.
No Clamps Necessary!
We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
KegLand Part Numbers: KL46251
Keep your beer colder for longer with the insulating neoprene material Prevent dings and scratches during transport with an internal bump cap Easily carry your keg using the removable shoulder strap The zippered design makes it simple to put on and take off Tailormade for the 4L Oxebar Mono PET Keg Keep your beverage colder for longer with the Oxebar Neoprene Jacket. This parka is more than just a cozy sleeve for your keg; it's designed with a rigid internal "bump cap" to prevent those annoying scratches and scuffs that can happen when your keg is being moved around. Made from durable neoprene, this jacket helps maintain the temperature of your beverage, whether you're taking it to a party or just keeping it chilled in the fridge. The Oxebar Neoprene Jacket protects your keg while helping your beer stay crisp and cold. KegLand Part Number: KL4288
Replacement O-ring for beer faucet tower shanks D1239 and D1242.
This O-ring sits underneath the coupling nut of the shank, behind the teeth where the shank connect to the faucet.
KegLand Part Number: KL88067
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections
Silicone gaskets have a wide temperature range and are recommended for hot side applications
For 4" tri-clamp connections
A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time.
Available in both Silicone and EPDM.
Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets.
For 4" tri-clamp fittings
Made from Silicone
Temperature rated from -58°F to 446°F
KegLand Part Number: KL44806
This is a replacement BrewZilla PPSU Sight Glass tube. This is a one size fits all sight glass for multiple models and sizes. You will need to cut down the 39" PPSU tube to fit your specific model of BrewZilla depending on the length of the recirculation arm. We recommend purchasing the Pipe Cutter to cut the tube cleanly. If your unit did not already include the sight glass, Gen 3 and Gen 4 BrewZillas can be upgraded with one of these sight glass kits. See the video below showing you how to measure and install this on a BrewZilla. Specifications: 39.3" (100cm) Long 0.51" ID x 0.59" OD (13mm ID x 15mm OD) Temperature Rating: 356°F (180°C) KegLand Part Number: KL3380
It is really THAT easy to make good beer at home?+
YES! If you can follow a recipe and keep clean, there is nothing stopping you from making great beer in your home - beer you can be proud of and your friends will love! The MoreBeer! mission is to provide reliable equipment and quality ingredients that make the home brewing experience successful and satisfying. We'll get you started in home brewing the way we wish we had been started.
