KegLand is a high quality homebrewing equipment brand based out of Australia. We offer a wide variety of their products, from BrewZilla all-in-one system and DigiBoil eletric kettles, to pumps and grain mills. KegLand beer products are an incredible value, as they combine quality craftsmanship with low prices!
KegLand
-
Duotight Push-In Bulkhead - 8 mm (5/16 in.) x 1/4 in. BSP
This Duotight Bulkhead is the same one used for installing the Thermowell into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 8 mm OD Tubing (D1717 / D1718) or 5/16" OD stainless or copper tubing. Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. KegLand Part Number: KL14595
$4.99
-
HIZO G14 | Waterproof Pizza Oven Carry Bag
Pack up your HIZO Pizza Oven and feed hungry pizza fanatics wherever you journey Waterproof. Functions as both a carry bag and a storage cover The HIZO G14 Portable Gas-Fired Pizza Oven is the perfect no hassle solution to cooking the best homemade pizza outdoors. Fold down the legs of the HIZO G14 and tuck the gas hose underneath. Stretch out the carry bag and catch one end in under the adjustable string piece part and pull over the unit like you would a fitted sheet. There are a total of four clips on the underside. In a cross like pattern put the top left clip into the bottom right. Repeat with the top right to bottom left (refer to product photo if needed). This carry bag / storage cover has been hot-seamed stitched together for maximum waterproofing. KegLand Part Number: KL24891
$38.49
-
FermZilla Tri-Conical Butterfly Valve - 2 in. x 3 in. T.C.
Compatible with the 27L and 55L FermZilla Tri-Conical Series or any 2" or 3" T.C. fittings. This valve comes standard on the Tr-Conical FermZillas where the bottom of the tank attaches to the collection container. KegLand Part Number: KL26505
$43.99
-
Wort Chiller - 30 Plate Chiller (The Chillout MKIV)
Plate heat exchangers are one of the fastest ways to cool your wort and the Chillout is one of the best. The Chillout MKIV, now with new and improved male 1/2" BSP threaded posts, is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start. made from stainless steel and brazed together with pure copper. It also has ripples along each plate that create more surface area to improve heat transfer. A great addition to your brewing setup. Set up one side with Wort in & out, and Water out & in on the other side. Features: Made from stainless steel and copper Rippled plates for more surface area 1/2" Male BSP connections Dimensions: 12.4" x 2.8" x 2" (not including threads) KegLand Part Number: KL21234
$164.99
-
Solenoid Valve | Duotight Compatible | 12V | 0-115 psi | 6.35 mm
This super handy Solenoid Valve is compatible with 1/4" or 6.35 mm OD PE Water Line or EVABarrier tubing. This size tubing is often used on water filtering systems or reverse osmosis systems, and can be used with an Inline Regulator to drop your mains water pressure if needed. Unlike some other solenoid valves this is a direct acting solenoid valve meaning the solenoid valve can go down to 0 pressure. This makes it quite handy for controlling CO2 flow or other low-pressure gasses. Suitable for pressures up to 115 psi (8 bar) so it will handle water pressure with no problem at all. Made from high-quality metal and POM engineering plastics so it is durable and suitable for contact with a wide range of chemicals and beverages. Specs: Inlet/Outlet: 6.35 mm (1/4") Pressure Rating: 0-115 psi (0-8 Bar) Mode: Normally Closed (NC) Solenoid Coil Voltage: 12V Solenoid Coil Amp Draw: 1.1A KegLand Part Number: KL09478
$10.99
-
Ultimate Draft CO2 Growler
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Everything you need to have some fresh beer on the go. This ultimate growler is made from double wall, vacuum insulated stainless steel which makes it impervious to oxygen and sunlight. The included pressure lid allows you to pressurize the growler up to 30 psi with the provided mini CO2 regulator. The regulator uses 16 g threaded CO2 cartridges. Includes: 2 L stainless steel growler Pressure lid with plastic tap Mini CO2 regulator 6 CO2 cartridges Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.
$93.99
-
Duotight Push-In Fitting | 8 mm (5/16") | 5-Way Multi-Tee
Compact Design: Ideal for tight spaces inside small refrigerators or keezers. Versatile Routing: Use any port as the inlet to feed the remaining three outputs. Easy Expansion: Pair with DUO102 plugs to customize the number of active lines. Streamline Your Draft Setup with the Duotight 4-Way Tee Tired of bulky manifolds and a web of splitters? This compact Duotight tee is the ultimate space-saver for 4-tap kegerators. Whether you are splitting a single CO2 line to four separate kegs or distributing liquid lines, this single fitting replaces the need for multiple daisy-chained tees. The push-to-connect design allows you to plumb your primary line into any port and instantly branch off to four different outputs. If you aren't using all four lines yet, simply use the Duotight 8mm Plug (DUO102) to cap the unused ports. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. KegLand Part Numbers: KL46268
$4.99
-
Duotight Push-In Thermowell Tee | 9.5 mm (3/8")
Precise Temperature Monitoring: Accurately track your brew's temperature throughout the entire process with a secure fit for 3.5mm-4.5mm OD temperature probes. Leak-Proof Duotight Seal: Enjoy confident, hassle-free brewing with a reliable seal that prevents leaks and disconnections. Easy to Clean: The unit disassembles for thorough cleaning and can be easily sanitized for both hot- and cold-side brewing. Red Reaper Compatible: Highly recommended for connecting a thermometer to the Red Reaper Counterflow Chiller. Elevate your homebrewing with the Duotight 9.5mm (3/8") Thermowell Tee, designed for brewers who demand accuracy. This versatile accessory is perfect for monitoring temperatures on both the hot and cold sides of your brewing process. The tee securely holds 3.5mm to 4.5mm OD temperature probes, providing a stable connection for precise readings. Its innovative Duotight design ensures a leak-proof seal and simple installation, so you can monitor your brew's temperature with confidence and without the hassle of leaks or disconnections. Cleaning is a breeze—the unit can be disassembled for soaking and boiling to sterilize. For hot-side use, you can easily sanitize it by recirculating during the boil. Specs: 2 x 9.5mm Duotight push-in ends 1 x silicone bung suits 3.5mm–4.5mm OD probes Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. KegLand Part Number: KL36948
$4.99
-
NukaTap® Mini Beer Faucet | Duotight Adapter | 8 mm (5/16")
This Duotight 8 mm (5/16") adapter is designed to suit the Nukatap Mini and will allow you to couple the faucet to a wide range of other 8 mm Duotight fittings. This includes attaching it to the Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adapter. The combination of the two fittings prevents the faucet from spinning around while in use. Sold Separately: NukaTap Mini Beer Faucet (D1598) Flow Control Ball Lock Disconnect (DUO159) Mini Self Closing Spring (D1598A) KegLand Part Number: KL32209
$7.69
-
Drip Tray - 15.7 in. Wall Mount
Stainless steel drip tray with pre-punched wall mounting holes. 15.5" wide with 5" tall backsplash. The grill is removable for easy cleaning. Perfect for 4–5 faucets. Specs: Back splash: 5" tall Grill: 15.5" W x 6.625" D Overall width: 15.8" Overall depth: 6.75" Removable grill Made from stainless steel KegLand Part number: KL01397
$65.99
-
Cannular Pro | Replacement Relay | Semi Automatic Model Only
Replacement DPDT Power Relay for the Semi Automatic Cannular Pro. If the motor of your Cannular Pro is not turning off after running through a full rotation then you may need to replace the power relay. This relay distributes power to the motor when the operation button is pressed and also turns the motor off once the microswitch has been activated and hence the Cannular has run through a full seaming rotation. Specifications: Model: JQX-13F(D) 8-Pin Voltage & Current Ratings: 10A 250V AC 10A 24V DC KegLand Part Number: KL21524
$16.49
-
NukaTap® Mini Beer Faucet | Wall Mount Shank Kit | 8 mm Duotight
Designed specifically for mounting the NukaTap Mini Beer Faucet on any kegerator, keezer, cold room wall, or other flat surface Connect beer line directly to the faucet, reducing the amount of temperature loss to a standard draft shank No spinning faucets. Your tap will remain in a fixed orientation once locked into the collet Easy installation. No need to drill a large hole through your fridge to accommodate a standard 5/8" draft shank Use with 8 mm OD EVABarrier draft tubing Note: Faucet Sold Separately This shank kit is specifically designed to suit the NukaTap Mini Beer Faucet and will allow you to connect the NukaTap Mini to a cooler box, kegerator, keg fridge, cold room wall or any other flat surface. This wall mount shank kit is for use with 8 mm OD EVABarrier. For the shank kit for use with 6.35 mm OD EVABarrier, see here. New Innovative Shank Design Unlike other shank kits, this kit doesn't use a bulky 5/8" threaded shank. The issue with a standard draft shank is that acts as a heat sink, and due to the fact that most shanks sit inside an insulated wall, this results in a substantial amount of warm beer coming out of the tap before cold beer starts flowing. This results in substantial "first pour foam" effect which wastes beer, can result in sour beer, and ultimately negatively effects the quality of the beverages being served. This new design has the beer line feed all the way directly up to the back of the faucet, greatly reducing the volume of non-refrigerated beer. No Spinning Shanks If you have ever installed a traditional 5/8" long shank, you will know how frustrating it is when you use the faucet and it starts rotating. This new design of shank alternative uses three screws that lock the tap into a fixed position and prevents the taps from rotating. If you loosen the 1/2" stainless tap collet you can still have the flexibility to rotate the faucet to any orientation, but once the collet is tight, interlocking teeth on this shank kit and the NukaTap Mini will hold the tap permanently in the correct orientation. Easy Installation Another advantage compared to standard shanks is that this kit doesn't require you to drill a large 3/4"-1" hole through the wall. As no shank is required, only a hole large enough to accommodate the beer line is required. As a result, an 8mm (5/16") conventional drill bit is all that is necessary for installation. However, if you are concerned about the small amount of beer sitting in the draft line inside the wall not being refrigerated, you can also shell out a larger diameter of foam on the inside of the wall to allow cold air to circulate around the beer line thus reducing the non-refrigerated beer in the line even more. If you wanted to do this the Step Drill Bit is the best tool for the job. Any Wall Thickness Other shank kits will require you to purchase a specific length shank for a specific wall thickness. This new shank alternative will fit any wall thickness. If you have wall thicknesses that are less than 2.7" thick then you can use the included screws that have "snap off" points so you can simply cut the screws down to the desired length. However, if the wall is thicker than 2.7" you can simply purchase a conventional screw from the hardware store and screw the shank kit to your wall. If the substrate is firm enough you may not even need to go all the way through the wall so a common 1-1/4" long screw may be all that is required. Specifications: Beer Line Diameter: 8 mm OD EVABarrier Collet and Screw Cover: 304 Grade Stainless Steel O-ring Material: Dual O-ring Silicone/EPDM combination Plastic Mounting: Polyketone (POK) Temperature Range: 14-212°F (-10-100°C) Max Pressure: 150 psi KegLand Part Number: KL32186
$21.99
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) Ball Valve
This Monotight ball valve can be used as an inline shut off valve on draft lines. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL21951
$2.19
-
BrewZilla Replacement Power Cord | Gen 4 | 110V
Replacement removable power cord for the 110V 35L Gen 4 BrewZilla. KegLand Part Number: KL44592
$24.99
-
Extended Malt Pipe for Boiler Extension | BrewZilla | DigiBoil | 65L | 17.1G
For use with the 65L BrewZilla Boiler Extension Kit. It does not come with an extra Wire Malt Pipe Support Ring. If you're using the extended malt pipe with the 65L DigiBoil, you will need to purchase the ring separately. If you're using the malt pipe with the 65L BrewZilla you can either move your ring up to the boiler extension, or buy an additional ring so you can remove the malt pipe in two steps. You will also need the Ricirculation Arm Extension to continue using the BrewZilla's recirculation arm. Compatible with 65L Gen 3 / Gen 4 BrewZillas. Example image of the 35L model shown here. KegLand Part Number: KL32834
$87.99
-
Stainless Tri-Clamp | 1.5" T.C. x 1" BSP Female
Convert 1" BSP fittings to 1.5" tri-clamp. Made from 304 stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. Kegland Part Number: KL23443
$16.49
-
KegLand Mini Keg | Stainless Pressurizable Beer Keg | 8L | 2.1 Gallon
Perfect for serving your craft creations on the go or making a compact home draft system that fits inside your refrigerator Welded from the inside out using a specialized technique for superior, more sanitary welds compared to similar mini kegs Interlocking chimes for easy and secure stacking of multiple mini kegs KegLand's Small Stainless Steel Mini Beer Kegs are ideal for homebrewing small batches and serving your craft creations directly from your home fridge. These compact kegs are designed for convenience and versatility. Flexible Dispensing and Carbonation You can naturally carbonate your beer using priming sugars or, for a more controlled approach, force carbonate and serve with the Ball Lock Tapping Head. The Tapping Head features a flexible silicone dip tube, allowing you to dispense beer whether the keg is standing upright or lying on its side. The dip tube will sink and draw liquid from the bottom, allowing you to orient the keg whichever way is more convenient in your refrigerator. Superior Quality and Durability KegLand's mini kegs are built to last, undergoing acid bath electrolysis to passivate the stainless steel, making them exceptionally resistant to rust. These are the only mini kegs on the market that are welded from the inside out using a specialized technique. This results in a superior, more sanitary welding finish compared to other mini kegs. When you choose a KegLand mini keg, you're investing in the highest quality available, surpassing the standards of other mini kegs of similar design. Low2 Lid O-Ring The sealing cap features an O-ring made of KegLand's special Low2 material which offers vastly improved oxygen barrier properties compared to silicone or EPDM, resulting in your beverage staying fresher for longer. Expand Your Setup with Accessories Enhance your mini keg experience with a range of available accessories, including neoprene jackets for insulation and compact tapping systems for easy dispensing. Stackable with the 5L and 10L Mini Keg. Specs: 8L / 2.1 Gal / 270 fl oz 16" High x 6.8" Diameter (280mm x 175mm) Max Working Pressure: 45 PSI / 3 Bar Made from 304 Stainless Steel KegLand Part Number: KL06378
$74.99
-
KegLand Big Jugs | Graduated Measuring Pitcher | BPA Free | 5L
Crafted from heavy-duty, impact-resistant material, Big Jugs endure drops and freezer conditions without cracking or breaking Made from BPA-free materials with clear, dual-scale markings for accurate measurements up to 5L or 5000 mL Features a wide-mouth opening for easy filling and cleaning, an integrated drip-free spout, and a comfortable ergonomic handle for versatile use Tired of flimsy measuring tools that crack and break? Big Jugs are your robust solution. Perfect for dissolving ingredients like DME or dextrose for bottle conditioning, or for safely mixing cleaning chemicals, these jugs are heavy-duty and impact-resistant, designed to endure drops and even freezer conditions without breaking. Big Jugs are made from BPA-free materials, ensuring no harmful chemicals leach into your food or boiling liquids. Achieve precise results with the clear, easy-to-read measurement markings with dual scales that measure up to 5L or 5000 mL. (Does not include a fl oz scale.) The smart design of Big Jugs prioritizes your convenience. A wide-mouth opening allows for effortless filling and cleaning, while the integrated spout guarantees smooth, drip-free pouring. With a generous capacity and a comfortable, ergonomic handle, these jugs are as versatile as they are durable, ready for any task in your beverage crafting process. Key Advantages: Extreme Durability: Withstands impact and harsh conditions. Food-Safe: Made with BPA-free materials. Accurate & Easy: Clear markings for precise measurements. Convenient Features: Wide opening, drip-free spout, ergonomic handle. Multi-Use Functionality: Ideal for a broad range of applications. KegLand Part Number: KL45131
$11.49
-
Flanged Tri-Clamp Gasket | EPDM | 8"
Flanged tri-clamp gaskets extend over the ferrule, holding them securely in place for easy, frustration-free connections EPDM gaskets are more resistant to acids and caustic chemicals, and don't show signs of wear as quickly as silicone For 8" tri-clamp connections A flanged tri-clamp gasket differs from a standard gasket or seal because one half of the flanged gasket extends over the edge of the T.C. ferrule, which holds it more securely in place. This makes the gaskets extremely easy to work with while clamping down connections, and helps you avoid the frustration of fumbling a freshly sanitized gasket onto the floor at the worst possible time. Available in both EPDM and Silicone. EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 8" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F KegLand Part Number: KL45193 Example Image: Updated images coming soon. See the video below to check out the flanged gaskets in action.
$4.99
-
Perforated Pizza Peel | Round Pizza Spinner | 8"
Master the art of pizza cooking with the ultimate tool—the perforated pizza peel! Spin the pizza for even cooking, lift it higher to flames to cook the top, or shield it from heat to protect the top while the crust cooks Perforations allows heat through to continue cooking the pizza while using the spinner and also allows excess flour to dislodge from the base Perfectly sized for HIZO Pizza Ovens Learning to use a pizza peel and developing your turning skills in the oven is most beneficial and highly recommended. It will take a bit of practice but using this tool will help you manage your pizza while it cooks—and the results will be well worth it! Pizza peels may come perforated or solid but perforated pizza peels have the benefit of allowing the heat from the pizza stone to cook your pizza as it turns and also allows excess flour to be dislodged from the pizza base. The turning peel can also be used as a handy tool to prevent the top of your pizza from overcooking when needed. You can do this by using the peel to shield the top of your pizza from the flame. The peel can also be used to lift the pizza toward the flame when you need to cook your crust or when your base has cooked but your crusts have not. This procedure allows you to manage the cook of your pizza with more precision. With some practice, learning to use a turning peel will give you the opportunity to cook your pizza with more precision against the heat. It will also allow you to turn your pizza without burning your fingers and misshaping your round pizza. Plus, don't forget the handle length of your peel. If you are using a pizza oven with a flame close to the front of the oven, you will need to use a long-handled peel to protect your hands. The size of your pizza oven and the pizza itself will determine the size of your peel. This 8" pizza peel is perfectly sized for the HIZO Pizza Oven. Approximately 8" round and 24" long. KegLand Part Number: KL21852
$32.99
-
RAPT Fermentation Chamber | Replacement Heavy Duty Wire Shelf
Replacement Heavy Duty Wire Shelf for the RAPT Fermentation Chamber. Weight Rating: 132 lbs (60 kg) Dimensions: 17.7" W x 16.1" D x 1.1" H (450mm x 410mm x 30mm) KegLand Part Number: KL15844
$21.99
-
Cannular Pro Visy Chuck | Suits 202 CDLE/CDL Ends
Easily switch your Cannular Bench Top Canning Machine between B64 and CDLE ends without changing rollers Specifically designed for use with Visy/CDLE (Ardagh) can ends Hardened stainless steel construction, machined to tight tolerances for consistent seaming This chuck allows the Cannular Bench Top Canning Machine to be used with Visy/CDLE ends. Instead of changing the rolls, simply swap the chuck, make minor adjustments to the rolls and table height, and you can quickly seam CDLE ends. Most aluminum can bodies are manufactured to the 202 standard. Two primary manufacturers produce lids for these 202 cans. The B64 is the standard lid used on most of the 500ml and 330ml cans we offer. Both 202 can designs are also compatible with other CDLE ends, should you wish to use your own. About Can End Manufacturers Two major competitors produce aluminum beverage can lids: Ardagh Group (a European company) primarily supplies CDL-type ends, and Ball (an American company) mainly supplies B64 and other end types. CDL and B64 are the dominant end types for 202 can bodies. B64 ends are commonly used in America, while CDL ends are more prevalent in Europe. About CDLE Ends CDLE ends are the primary type sold by Visy, as they license the technology from Ardagh Group. While some may refer to them as CDL ends, the correct technical name is CDLE. This should not be confused with the CDLE's predecessor, CDL+. Specifications: Hardened stainless steel construction Machined to 20-micron tolerance Fits 19mm drive shaft Tightened with a 3mm Allen key KegLand Part Number: KL14670
$43.99
-
KegLand Quick Swivel Connector | 1/2" x 3/8" Straight Barb | 9.5 mm Duotight Compatible
High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Fits all male 1/2" NPT and BSP fittings 9.5 mm Duotight compatible stainless steel barb tail The KegLand Stainless Steel Quick Connectors come with a heavy-duty silicone grip guard allowing comfortable and quick tool-free operation. Specs: Stainless steel and silicone construction Silicone O-ring seal is retained for perfect positioning but is easily cleaned or replaced 3/8" (9.5mm) OD barb tail KegLand Part Number: KL31622
$8.79
-
FermZilla Tri-Conical Easy-Grip Pressure Fermenter Starter Kit | 55L | 13.2G
A best seller for a reason! Tons of features at an incredible cost Crystal Clear super smooth PET makes fermenting and cleaning super easy 3" Butterfly valve at bottom makes removing yeast/trub easy with the 600mL collection jar. Pressurizable for fermentation and closed transfer to your keg Includes BlowTie spunding valve kit, red & yellow carbonation caps, and floating dip tube as standard The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full-blown stainless-steel unit. It allows you to dump trub, harvest yeast, and with the addition of CO2 cylinder and regulator, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure. The FermZilla Tri-Conical Easy-Grip model comes packed with accessories so you can take full advantage of this pressurizable fermenter on day one. The new stock standard includes Easy-Grip threaded lid ring, BlowTie spunding valve with integrated pressure gauge, ball lock carbonation caps for the lid, floating dip tube kit with weighted filter, volume marker graduation sticker, and adhesive thermometer. What's Included: FermZilla 55L Tank with 3" T.C. Bottom Port Easy-Grip Threaded Lid Ring Integrated Gauge BlowTie Kit Spunding Valve (0-15 psi) Silicone Dip Tube Kit with Yellow Weighted Filter and SS Float (1) Yellow Liquid Carbonation Cap (1) Red Gas Carbonation Cap Fermzilla Pressure Lid with Red PRV (35 psi) 3" T.C. Butterfly Valve 600 mL Collection Container with 3" T.C. Connection Stainless Steel Stand with Swing Handles 3" tri-clamp with gasket Graduation Sticker Adhesive Thermometer Specs: 55 L (13.2 gal) Total Volume Pressure Rated to 2.4 Bar (34.8 psi) Height in Stand - 41.5" Tank Diameter - 13.9" Diameter in Stand - 15.3" Lid & Collection Container Ports - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years. Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads. Pressure Stress If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. General Care Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank. KegLand Part number: KL47302 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary. FermZilla Tri-Conical 27L & 55L | User Guide
$199.99
-
NukaTap® Mini Beer Faucet | Stout Spout
The Stout Spout installs on the NukaTap Mini to improve the pour of your stouts and nitro brews The creamer/aerator disc inside strips out nitrogen gas for a creamier beer Simply unthread the standard spout from the NukaTap Mini and swap in the Stout Spout Simply unscrew the normal spout from the NukaTap Mini and screw this Stout Spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. Only compatible with the NukaTap Mini faucet. The Stout Spout will have a 1/4" female flare thread. KegLand Part Number: KL32858
$8.79
-
Stainless Steel Shuttle for NukaTap® Beer Faucet
This stainless steel shuttle can be used to replace the TPV rubber NukaShuttle that comes standard in the NukaTap beer faucet. For users that prefer stainless internal mechanisms in their faucet. You will need to remove the bonnet piece at the handle, pull the handle out and then slide the shuttle piece out. Compatible with all NukaTap faucets, including Gen 2 Flow Control. KegLand Part Number: KL35958
$5.49
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) Plug
This Duotight plug is used to block up your 9.5 mm (3/8") tees, elbows or other fittings for gas leak testing or simply to plug an unused section. Features: Insert plug and firmly push to connect Release plug by pushing in the collet on the Duotight fitting Suitable for both gas & beverage applications Made from food-grade acetal plastic Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL06965
$1.79
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) Ball Valve
This Duotight ball valve can be used as an inline shut off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07474
$4.99
-
KegLand Quick Swivel Connector | 1/2" Elbow Barb
This elbow barb makes it easier to route lines and avoid kinks in your tubing. Commonly used for pump inlet/outlets, fermenter blowoffs, or gravity fed transfer lines. Quick Swivel Nut sold separately. Specs: 1/2" (13mm) OD x 1/2" Quick Swivel Nut compatible end Stainless steel KegLand Part Number: KL31660
$7.69
-
Stainless Tri-Clamp | 3 Piece | 3" Clamp
Double-hinged for easier handling when connecting tri-clamp fittings Textured tightening knob for better grip with wet hands Hang the clamp by the knob on a peg board when not in use This stainless steel tri-clamp features two hinges and folds into three pieces. Some brewers find this style of clamp easier to work with on large equipment that requires a 3" clamp. Direct replacement part to the clamp included on the FermZilla Tri-Conical fermenter. KegLand Part Number: KL25799
$14.49
-
Replacement Silicone Seal for Boiler Extension | BrewZilla | DigiBoil | 35L
Replacement silicone seal for the 35L size Boiler Extension Kit. KegLand Part Number: KL22576
$10.99
-
KegLand Ball Lock Quick Disconnect (QD) | Gas In | Stainless Steel | Barbed
304 cast stainless steel ball lock quick disconnect made for high-durability White ring above the outer bushing to identify the QD for gas use Compatible with all ball lock style homebrew kegs 1/4" barb connection This is Ball Lock Quick Disconnect is constructed from stainless steel for lifetime longevity. 1/4" barb. This QD is for the Gas In side. 2-1/8" H Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless. Kegland Part Number: KL02981
$18.99
-
Replacement Table Spacer for Cannular Pro Can Seamer
Replacement table spacer for the Cannular Pro Semi-Auto Can Seamer (CAN110). Suitable for 500mL, 330mL aluminum cans and tin cans. It is not compatible with the manual seamer model (CAN100). KegLand Part Number: KL17879
$27.49
-
Reagent Bottle for Yeast Starters - 500 mL
This is a super cool bottle for making yeast starter wort. Mix DME and water to make your wort and then boil in the microwave with the cap off. Remove from microwave, thread on the cap while still hot, and place in refrigerator. Store the wort till you need it. When you are ready to make a starter remove from refrigerator to warm up, pour into a sanitized flask, and add your yeast. Make multiple bottles all at once at store in your refrigerator until needed. This reagent bottle is made from durable borosilicate perfect for storing anything you need. Borosilicate is great because unlike ordinary glass it won't crack with rapid changes in temperature. KegLand Item Number: KL04015
$10.99
-
Replacement Silicone Elbow for PCO38 Tapping Head
This silicone elbow is a replacement for the elbow provided in the PCO38 Tapping Head Kit. Allowing for a 90° connection between the barb on the yellow liquid plastic carbonation cap and the 6.3 mm OD dip tube provided in the kit. KegLand Part Number: KL26260
$2.19
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) x Female Beer Thread
This Duotight to Female Beer Thread (5/8" BSP) fitting is perfect for connecting gas line to keg couplers. Although it could be used with 9.5 mm EVA Barrier as a beverage line, this would only be recommended for long draw systems where the beverage line will be 20-25 ft long. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Compatible with EVABarrier 9.5 mm OD tubing (D1719). This Duotight fitting with 5/8" FPT is perfect for connecting gas line to keg couplers. Although it could be used with 9.5 mm EVA Barrier as a beverage line, this would only be recommended for long draw systems where the beverage line will be 20-25 ft long. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Keg coupler not included. Kegland Part number: KL06910
$4.99
-
Stainless Steel Tee | 5/16 in Barb
3-way stainless steel tee with 5/16" barbed ends. Use the tee to split gas lines to push multiple kegs with one CO2 tank. KegLand Part Number: KL04442
$5.49
-
Nukatap® Counter Pressure Bottle Filler | Replacement Seal Kit
This handy kit contains all the seals needed for a NukaTap Counter Tap Bottle Filler. Includes: (1) Bleed Valve Seal (1) 1/4" Male Thread Seal (2) Push-in Barb Seal (3) Gas Purge Valve Seals The majority of these seals in the NukaTap Counter Pressure Bottle Filler would never normally need to be replaced. But in the event of accidental loss or damage, please replace the seals with the addition of food-grade lubricant to ensure their longevity. KegLand Part Number: KL27632
$5.49
-
KegLand Benchy Sparkling | Countertop Water Carbonator & Chiller | Instant Pour Sparkling Water
Instant and infinite sparkling water at your fingertips whenever you want it! Benchy connects to your household's water supply, chills, carbonates, and delivers on demand Serve up to 8 gallons of chilled, carbonated water per hour Pair with draft faucets and place it on your counter, or install it under the counter and plumb it to a mounted water faucet See below for detailed installation video Benchy Sparkling is the answer for instant chilled and carbonated water on demand. Simply connect your household water supply and CO2 Cylinder to the unit and receive unlimited sparkling and chilled water from the draft faucets. The chiller is highly efficient with very little power draw while idle and has enough cooling capacity to serve up to 8 gallons of sparkling water per hour. This unit comes without shanks or draft faucets, as it can be used as a countertop unit or installed under your counter and routed to a faucet you install on your counter or kitchen sink. If you plan to use it as a countertop unit, we highly recommend NukaTap Flow Control Faucets. Easy Installation: Plug the Benchy into the wall Fill internal water tank Connect household water supply Connect CO2 Cylinder Pour chilled sparking water. It's that simple and you can be enjoying chilled sparkling water in under 1 hour with this setup and barely any time at all to cool down. Ensure that the unit is installed and operated according to the instruction manual which can be found below. Fully Adjustable The Benchy Sparkling has an integrated digital temp controller so you can control the temperature from 0.5-10°C (33-50°F). You can also vary the carbonation level from 0.5 volumes to over 5 volumes for super bubbly water. Cooling Performance The Benchy Sparkling is able to chill about 5 to 8 gallons of sparkling water per hour (based on ambient water and air temperature of 68°F). To further increase the capacity of this unit, you can pre-chill the water from your household supply line either by a holding tank (ball lock keg) in the fridge or a DraftMaster Chiller. If you pre-chill the water you can more than double the output of the Benchy Sparkling. The reservoir temperature on the Benchy should never be set below 2°C (35°F) as you will run the risk of freezing the water inside the carbonation keg. Specifications: 110V Refrigerant: r600a (80 grams) Cooling Power: 600 watts Power Consumption: 155 watts (idle power consumption less than 5 watts) Capacity: approximately 6.6 gal/hour (based on 68°F ambient temperature) Input Gas: CO2 @ 29-50 psi (Requires 8mm (5/16") OD tubing) Input Water: Must be 15 psi higher than gas pressure (Requires 6.35mm (1/4") OD tubing) Sparkling/Chilled Water Out: Requires 8mm (5/16") OD tubing Dimensions: 18.3" H x 11.4" W x 20.5" D (Excluding sight glass that can be removed) Recommended Accessories: CO2 Gas Cylinder CO2 Regulator EVABarrier 4mm x 8mm Tubing PE Water Line Tubing 6.35mm Duotight In-Line Regulator (0-150 psi) Duotight Reducer - 8mm x 6.35mm 8mm Duotight Check Valve Diverter Valve (check water line connection for the size you'll need) Countertop Installation Recommended Accessories: (2) Short Shanks & Hex Nuts (2) Duotight Adapters - Beer Thread x 8mm (2) NukaTap FC Faucets& Self Closing Springs (2) Tap Handles (of your choice) Tube Cutter Faucet & Shank Wrench KegLand Part Number: KL2068
$989.99
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) Joiner
This Duotight joiner fitting is compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07016
$3.29
-
Brewzilla Sight Glass Seal Kit
Four pack of O-rings for the BrewZilla Sight Glass stainless steel ball valve and elbow. The PPSU Sight Glass uses radial sealing in order to not leak, even under pressure from a 25W pump. This is a very similar design to the Duotight fittings that also use two O-rings. Incase one breaks, or leaks, there is another to save the day. KegLand Part Number: KL33824
$3.29
-
Replacement Malt Pipe Top Screen for BrewZilla | Probe Hole | Gen 4 | 35L
Specifically designed for maximum strength and rigidity. This redesigned top screen features a hole for the probe of the RAPT Bluetooth Thermometer (coming soon) for monitoring and controlling your BrewZilla Gen 4. KegLand Part Number: KL2736
$27.49
-
Cannular Pro Bench Top Aluminum & Tin Can Seamer
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. This kit includes the Tin Can Chuck Adapter at no extra cost, allowing you to seamlessly seal tin-plated steel cans (100mm diameter) right out of the box. The Cannular comes ready for aluminum cans, but this adapter is essential for tin cans. Get everything you need to start sealing cans for food applications. This kit includes the Cannular Pro Semi-Auto Canning Machine, a 110V Power Supply, and a Splash Guard Accessory. Built with a 304-grade stainless steel platform and a hammered sheet metal body, the Cannular is designed for safe and reliable operation in wet environments. Stainless steel screws and rubber feet add to the durability and stability. With only three simple steps, the semi-automatic operation makes canning quick and efficient. Just place the lid, raise the can, press the button, and lower the can. While the Cannular is ready for 12oz and 16oz aluminum cans, the included Tin Can Chuck Adapter expands its capabilities to seal robust tin-plated steel cans, ideal for preserving a variety of food products. Everything you need to start seaming Tin Cans for food applications with the Cannular Pro can seamer. This kit includes the Cannular Pro Semi-Auto Canning Machine, 110V Power Supply, Splash Guard Accessory, and we've included the Tin Can Chuck Adapter for free!. Please note: the Cannular comes ready for sealing 12 oz and 16 oz aluminum cans as standard. The Tin Can Chuck must be installed before seaming tin plated steel cans. Home canning is a great method for preserving homemade food products and storing fresh fruits and vegetables from the garden. Tin plated steel cans are a robust packaging option, and include easy-open pull-ring lids that do not require a can opener. Just lift the ring pull and tear off the lid of the can. These cans are suitable for a diverse range of food or non-food products such as meat, beverages, oil, chemicals, fruit, and vegetables. Steel cans are a great option for food storage containers, as they are stronger than plastic options and far less fragile than glass mason jars. Due to the robustness of the container, sealed cans won't break from falls off the counter and they will protect the product in transit and prevent leakage or loss. They offer 100% barrier protection against light, water, and air -- not only protecting the quality of your food products but also extending their shelf life. Operation: The beauty of the Cannular lies in how truly simple it is to operate, and the semi-automatic pro model makes canning beer even easier. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows: Place lid atop the can and place the can on the table spacer Turn the platform lever clockwise to raise the can to the seamer Press the seaming operation button then wait for the can to stop spinning Turn the platform lever counterclockwise to lower the can That's all there is to it! Construction: The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there's no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible. Kit Includes: Cannular Pro Can Seamer 110V Power Supply Splash Guard Tin Can Chuck for 100mm diameter cans Cannular Pro Specifications: Power: 250W 24V DC Rated Speed: 3300 RPM Gearbox Ratio: 9.8 : 1 Dimensions: 16" L x 9.5" W x 21" H Weight: 40 lbs Please note: When you receive your cannular the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular's test show that a .4mm (.015") actual overlap is all that is needed to seal to 90 PSI. The proper table tension takes a little practice and expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment. For more information on can seaming, check out this site here. Cannular Compact Semi-Auto Canning Machine | User Guide
$949.99
-
Ball Lock Adapter Tapping Head for Sanke Kegs
If you like serving out of commercial kegs but prefer the ease of using ball lock fittings in your draft system, this adapter is for you. Instead of buying additional keg couplers and beer thread to ball lock adapters, you can use this tapping head to go straight from sanke keg to ball lock. To install, remove the keg spear, place the gasket on the keg ferrule with the beaded side facing up, attach the silicone dip tube and place the tapping head on the ferrule, then secure with the 2" tri-clamp. Be sure to always depressurize the keg before removing the tapping head. Includes: Ball Lock Post Lid 2" tri-clamp Single-side beaded tri-clamp gasket 60 cm silicone dip tube (23.6") Red 2.5 bar PRV (36 psi) KegLand Part Number: KL10610
$65.99
-
Duotight Push-In Fitting | 9.5 mm (3/8") Male Stem x 8 mm (5/16") Female Reducer
Seamless Conversion: Easily adapts 8mm EVABarrier tubing to any 9.5mm female Duotight fitting. Leak-Free Connection: Precision-engineered for a secure, airtight seal using standard Duotight push-fit technology. This reducer allows you to attach 8mm EVABarrier tubing to any 9.5mm female Duotight fitting. For example, if you already own 9.5mm Duotight QDs and wish to use them with 8mm OD tubing, this fitting will allow you to do so without needing to purchase all new QDs in 8mm. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. KegLand Part Numbers: KL42635
$2.99
-
KegLand Quick Swivel Connector | 1/2" Straight Barb
This straight barb in 1/2" (13mm) OD is only compatible with the 1/2" KegLand Quick Connector Swivel Nut. 3/8" (10mm) ID bore. Quick Swivel Nut sold separately. KegLand Part Number: KL31585
$3.99
-
American White Oak Barrel | Medium Toast | 10L | 2.64 gal
This new American White Oak barrel is made by hand and flamed to a medium toast. A small oak barrel is great for ageing your homebrew, homemade wine or spirits. The exterior is raw unvarnished wood, so take care to keep your barrel in tip top shape. The care guide below will give you instructions on to prepare the barrel for first time use, and also how to keep it hydrated and sealed. Comes standard with a stainless steel spigot. Features: 10 L (2.64 gal) American White Oak Medium toast Raw Exterior (Non-Varnished) for easier leak prevention techniques Stainless Alloy Rings coated in a protective black coating Food grade reinforced plastic screw in cork Stainless steel spigot Barrel Wax Block Stand included KegLand Part Number: KL04664
$252.99
-
Heavy Duty False Bottom | BrewZilla | DigiBoil | 65L
NOTE: This accessory is designed exclusively for 3-vessel brewers who want to use the BrewZilla or DigiBoil as a mash tun. It is not meant to be used alongside a malt pipe, and it is not intended to be an upgrade or replacement to the BrewZilla's standard false bottom protection screen. If you're a 3-vessel brewer and want to use the BrewZilla or DigiBoil purely as a mash tun, this is false bottom will give you more volume compared to mashing with a malt pipe. Designed for use with DigiBoil electric kettles or BrewZilla all-in-one systems. Unlike two-piece false bottoms you may find, this unit is welded together for maximum strength. It will easily withstand as much grain weight as you could possibly fit in the vessel. Features welded handles to easily remove the false bottom when cleaning. Compatible with 65L DigiBoils and Gen 3/4 65L BrewZillas. Dimensions: Diameter: 15.35" (390 mm) Height: 1.88 (48 mm) Approximate Dead Space: 1.5 gal (5.7 L) KegLand Part Number: KL27717
$87.99
You have seen 336 out of 524 products