Setting up a home brewery can require a lot brewing hardware. Luckily, we have brewery hardware and fittings for practically every configuration! Whether you're shopping for ball valves, stainless steel barbs or couplers, high temperature silicone tubing, or stainless steel quick disconnects, you will find all of the brew hardware and fittings you'll need here at MoreBeer!
Interested in Welding and Brazing Stainless Steel? Click here, to read our article on the subject!
This is a 304 Grade Stainless Steel Ball Valve 1/2 BSP Female x 1/2 BSP External Welded Thread. Often used to convert a keg into boil kettle, also known as a keggle. Includes: 1 x 1/2" Ball Valve with 1/2" BSP male & female thread 1 x Recessed 1/2" Nut 1 x Silicone Washer (used on the inside of vessel)
$24.49
This unique thermowell fitting is has the probe offset from the center of the fitting, leaving room for additional hardware such as the BrewBuilt Whirlpool Return Fitting. Pairing the two fittings allows you to recirculate wort in your boil kettle while still getting temperature readings from your thermometer or temperature probe. The thermowell has a 6" probe that fits all BrewBuilt kettles so that you can get the most accurate temperature measurement of your wort.
$27.49
If you want to use the absolute best style of valve available to homebrewers, the butterfly valve is the clear choice. Brewers love butterfly valves because they are far and away the most sanitary option. Regular ball valves can trap small amounts of wort inside them, which inevitably leads to an infection that can sour your beer. That's why we always recommend breaking down your ball valves and cleaning them between uses. Butterfly valves have virtually nowhere for contaminants to hide and are easily cleaned in place. They also can be taken apart for a deeper cleaning if desired, although it's rarely necessary. This 1.5" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The stainless steel handle can be rotated 180° for right or left hand operation. 1.5" tri-clamp Stainless steel handle 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$74.49
Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 3/16" or 1/4" ID tubing to 3/8" ID tubing. One end is slightly undersized at 6 mm (0.24") and the other is slightly oversized at 10 mm (0.39"). Made from 304 stainless steel.
$4.39
Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250°F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2" MPT, 3/8" Barbs, and 1/2" Barbed, all with both female and male QD options! Customizing your brewery to ease the brew day doesn't have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs! Features: Male Kent QD with 1/2" MPT on the other end. A single-handed connection and disconnection Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material Easy installation into your home brewery KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i. An affordable version for homebrewers who want an introduction into the world of quick disconnects. MADE IN THE USA!
$4.29
Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 2.5" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$3.49
This clean in place spray ball is designed to attach to an independent CIP pipe inside a conical fermenter or brite tank. We recommend using it with a pump capable of 29 psi or higher. 1.5" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$41.49
This is the male side of the Garden Hose Quick Disconnects. This set enables you to quickly and efficiently connect and disconnect lines from your Wort Chiller, Water Filter, or whatever else you feel could be improved through quicker connections! This product is designed to work in conjunction with our Female Garden Hose Quick Disconnect. Please Note: This product will NOT work with our Stainless or Plastic Quick Disconnects.
$6.99
Kent Quick Disconnects are a great way to start building some basic connectivity in your home brewery. This lineup of Quick Disconnects is affordable on the budget of any brewer. These are designed for single-handed use, can withstand temperatures up to 250°F and pressure up to 125 p.s.i.! The lineup has enough different options to adapt for use anywhere in the brewery: 1/2" MPT, 3/8" Barbs, and 1/2" Barbed, all with both female and male QD options! Customizing your brewery to ease the brew day doesn't have to cost hundreds of dollars and involve heaps of stainless, get things connected easily and cheaply with the Kent QDs! Features: Female Kent QD with 1/2" MPT on the other end. A single-handed connection and disconnection Can handle up to 250 degrees, extremely durable, medical-grade compliant and made from FDA approved material Easy installation into your home brewery KENT Systems quarter turn design functions safely regardless of pressure up to 125 p.s.i. An affordable version for homebrewers who want an introduction into the world of quick disconnects. MADE IN THE USA!
$4.99
Prevent electrocution! This is the best way to plug in a pump or other brewing or winemaking equipment because it will trip the circuit when any water flows on the ground wire. 15 Amps 1875 Watts 125 VAC 60 Hz.
$15.99
The Fermentap Weldless Sight Gauge features a glass sight gauge encased in a chrome-plated sheath. All metal parts in contact with the beer are 100% stainless steel, and the gasket is a high temp, food-grade material. You will need to drill a 1" hole in your kettle. This sight gauge features our new Fermentap Bulkhead, which is a beefy bulkhead with a full port hole. This means that you can actually upgrade this setup with a thermometer which will thread into the body, allowing you to check temperature and fluid level off the same upgrade! Features: 20" Sight Gauge is perfect for up to 30 gallon kettles(dependent upon dimensions!). Monitor liquid level visually without opening up your kettle! Extremely useful for HLTs on the top tier of a sculpture. Stainless construction means the product will last for years. Sight Gauge disassembles easily for cleaning. 1/2" FPT on sight gauge base means you can upgrade with a thermometer! Replaces our WL126.
$82.99
1.5" tri-clamp with 1/2" BSP male threads. Made from 304 stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL01847
$16.49
Adapt any 4" tri-clamp port to work with an existing 1.5" tri-clamp fitting or valve. Often used to connect tri-clamp accessories to the dome port on stainless steel conical fermenters. 1.5" x 4" tri-clamp 1.5" tall Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$52.49
This elbow fitting features 2" tri-clamp connections at both ends and is made from high-quality stainless steel. 2" tri-clamp 90° bend 3.75" tall Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$35.99
A great way to set up a homemade Mash Tun. These fittings are designed to thread into the inside of a bulkhead fitting, and clamp down on a copper or stainless tube to allow for a hard-plumbed false bottom! Simply thread the fitting into your bulkhead, loosen the nut, and slide your tubing in! Tightening down the nut with tubing inside will clamp the internal locking mechanism onto your metal tube, creating a seal, and insuring a happy mash tun, happy beer, and happier drinkers! 304-Type Stainless Steel compression fitting. 1/2" Male Pipe Thread with a 3/8" compression fitting on the other side.
$16.49
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1/4" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed. Here at MoreFlavor! we think this ball valve is actually easier to clean than 3-piece ball valves (such as our H602D).
$16.49
The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects. These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path. O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, that can connect to any H501 Series Male Plugs. It has a 1/2" Hose Barb on the other end for attaching any 1/2" ID tubing. While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages. These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems. The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Connections: Female Socket Quick Disconnect 1/2" Barb Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series
$17.99
This is a gasket / washer for 3/4 gaden hose fittings.
$0.49
Teflon gasket with 304 stainless mesh screen for 1.5" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. This screen can also be used with the 1.5" Hop Bong as an inline filter. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL28516
$7.19
Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 3/16" or 1/4" ID tubing to 5/16" or 3/8" ID tubing. The barbs are slightly undersized at 6 mm (0.24") and 8 mm (0.31"). Made from 304 stainless steel.
$4.39
Keep this plug on hand for anytime you want to remove an accessory from your equipment, but don’t want to be left with an open hole. Stainless 1/2 in MPT Plug. Hollow behind the threads.
$6.59
If you want to use the absolute best style of valve available to homebrewers, the butterfly valve is the clear choice. Brewers love butterfly valves because they are far and away the most sanitary option. Regular ball valves can trap small amounts of wort inside them, which inevitably leads to an infection that can sour your beer. That's why we always recommend breaking down your ball valves and cleaning them between uses. Butterfly valve have virtually nowhere for contaminants to hide and are easily cleaned in place. They also can be taken apart for a deeper cleaning if desired, although it's rarely necessary. This 3" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The handle can be rotated 180° for right or left hand operation. 3" tri-clamp 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$236.49
Convert 1.5" Tri-Clover to 1" Female Pipe Thread. 304-type stainless steel.
$21.99
This is the same fitting we use in our kettles. Designed with internal 1/2" FPT threading to accomodate diverters or maximizers, and outer 1/2" MPT threads for affixing a ball valve.
$8.79
This stainless steel CIP spray ball kit is perfect for homebrew conical fermenters as many popular units out there feature a 4" T.C. top port or clamp-on lid with 4" T.C. ferrule. Tri-clamp gasket not included. Kit Includes: 4" T.C. Cap with 1.5" T.C. x 1" BSP Male Thread connections 1" BSP x CIP Spray Head Requires pump with 12 GPM flow rate KegLand Part Number: KL22989
$65.99
Stainless steel barb adapter for 1/4" female pipe thread connections. For use with 3/16" or 1/4" ID tubing. Pack of 2.
$7.69
3/4 inch mpt and 3/4 inch barb. Made from 304 stainless. Will work on Ss Brewing technologies line of Chronical Fermenters, as well as with many 20x20 cm Plate & Frame Filters.
$6.99
This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 10 mm OD (0.39") for a tighter fit with 3/8" ID tubing.
$5.49
This cross fitting features 1.5" T.C. connections at all ends and is made from high-quality stainless steel. 1.5" tri-clamp 5.75" long x 5.75" tall Made from 304 stainless steel
$32.99
The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects. These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path. O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, which can connect to any H501 Series Male Plug. It has 1/2" Male NPT threading for use with any products equipped with 1/2" Female NPT. This QD is equipped with a shutoff valve. When not connected to another QD, this will not allow any flow. While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup is still incredibly durable, and does offer a few advantages. These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems. The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Female Socket Quick Disconnect 1/2" MPT Medical Grade Materials: Body: High-Strength polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series
$19.99
This tri-clamp extension tube features 1.5" tri-clamp connections at both ends and is made from high-quality stainless steel. Extension tubes (or spools) are an easy way to extend the length of any T.C. fitting or can be used to hard pipe a brew system for easier cleaning. 1.5" tri-clamp 12" long Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$28.99
Wall mount 2" OD piping Perfect for hard piped brewing systems Highly recommended for the bulky KegLand Activated Carbon Filter kits Pipe hanger clamps are quite useful if you want to mount 2" tubing to your wall, whether it be tri-clamp extension tubes for hard piped brewing systems or bulky accessories like activated carbon filters for distilled spirits. Made from 304 stainless steel. DN50 suitable for 2" to 2.25" OD tubing. We recommend purchasing at least two hanger clamps for wall mounting. KegLand Part Number: KL13116
$16.49
This is a Blichmann Spare Part. Replacement BrewMometer hardware kit. This kit includes the Jam Nut, O-ring, and O-ring retainer.
$2.10
Stainless steel Tri-Clamp reducer with 3" T.C. and 1.5" T.C. connections.
$32.99 $24.99
Used primarily in aeration and oxygentation systems that call for 1/8" ID line. 3/16" OD.
$3.69 - $26.29
Brass - 1/4'' FPT x 5/16'' barb
$4.99
