Setting up a home brewery can require a lot brewing hardware. Luckily, we have brewery hardware and fittings for practically every configuration! Whether you're shopping for ball valves, stainless steel barbs or couplers, high temperature silicone tubing, or stainless steel quick disconnects, you will find all of the brew hardware and fittings you'll need here at MoreBeer!
Interested in Welding and Brazing Stainless Steel? Click here, to read our article on the subject!
Replacement Polycarbonate Cup if you happened to damage or lose the reservoir for the 1.5" Tri-Clover Spunding Valve during routine cleaning and replacement of sanitizer solution post-fermentation. KegLand Part Number: KL27472
$16.49
High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Fits all male 1/2" NPT and BSP fittings 1/2" stainless steel barb tail The KegLand Stainless Steel Quick Connectors come with a heavy-duty silicone grip guard allowing comfortable and quick tool-free operation. These are ideal for the BrewZilla & DigiBoil ball valves, 25-Watt MKII Magnetic Drive Pump, or any 1/2" NPT or BSP connection. Specs: Stainless steel and silicone construction Silicone O-ring seal is retained for perfect positioning but is easily cleaned or replaced 1/2" (13mm) stainless steel barb tail with 3/8" (10mm) ID bore KegLand Part Number: KL31639
$6.59
2" TC Ferrule for welding onto a tank or section of pipe. 304-type stainless steel. ID is approximately 1-7/8th.
$10.99
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 3/4" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed.
$24.49
This Stainless Steel BSPP barb will connect any tubing with a 5/16" ID line to any fitting with a 1/4" Female BSPP connection. The barb is slightly oversized at 8mm (0.315") compared to 5/16" (0.3125") which will give you a tighter connection with your tubing. KegLand Part Number: KL06637
$2.79
Stainless steel joiner fitting for joining multiple lengths of tubing. Recommended for 3/8" ID tubing. The barbs are slightly oversized at 10 mm (0.39") which will give you a tighter fit when using 3/8" ID tubing. Made from 304 stainless steel.
$4.39
304 grade stainless steel ball valve. Full port for maximum flow rate. 1,000 psi rating for water, oil, or gas. 1/2" BSP female threads at inlet and outlet. KegLand Part Number: KL03681
$16.49
If you want to use the absolute best style of valve available to homebrewers, the butterfly valve is the clear choice. Brewers love butterfly valves because they are far and away the most sanitary option. Regular ball valves can trap small amounts of wort inside them, which inevitably leads to an infection that can sour your beer. That's why we always recommend breaking down your ball valves and cleaning them between uses. Butterfly valve have virtually nowhere for contaminants to hide and are easily cleaned in place. They also can be taken apart for a deeper cleaning if desired, although it's rarely necessary. This 2" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The handle can be rotated 180° for right or left hand operation. 2" tri-clamp 7 locking positions Squeeze trigger locking handle Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$99.99
1.5" Tri-Clamp end cap welded to thin wall stainless tubing for quick accurate temperature readings. Insert 1/4" thermal probe from controller. Works perfectly with our Ranco digital controllers. Thermowell mounts into 1.5" Tri-Clamp ferrule in the side or your tank. Has a 6 inch probe. Works with new 2016 Rancos
$32.99
Stainless Steel Straight External Threaded Pipe Nipple 1/2 in. BSP. This is often used to join two female BSP or NPT fittings. As it has a parallel thread (BSPP) it is perfect for attaching stainless ball valves to pots and stuff like that too. If you want to install this onto a pot you just need to drill a hole that is about 20.5mm diameter. KegLand Part Number: KL03667
$4.39
$7.99
This is a Blichmann Spare Part. Replacement 1" Tri-Clamp Gasket. This gasket is used for the bottom T.C. clamp on the Blichmann Fermenator.
$1.18
Replacement 1/2" KegLand Quick Swivel Connector Nut. Comes with a heavy duty silicone grip guard allowing comfortable and quick tool-free operation. Silicone O-ring included. KegLand Part Number: KL31547
$4.99
Our reinforced vinyl tubing is an excellent option for transfering liquids under 158F that require some pressure resistance. A common application for the reinforced vinyl tubing is the in & out lines to your wort chiller. This tubing is 5/8" inner diameter, is approved to 158F, and can handle working pressures up to 250 PSI.
$9.99 - $399.99
1/4" male BSPP stainless steel plug. Hex head design for easy installation or removal with a wrench. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06392
$2.79
Replacement interior gasket for H661 Butterfly Valve.
$12.49
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 3/8" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed.
$16.49
Heavy-duty hose clamp suitable for 1-1/4" to 2-1/8" OD tubing Effective and removable Easily adjusted with a flathead screwdriver Made from stainless steel A heavy duty hose clamp for large OD tubing. As effective as a pre-formed clamp but without the expense or permanence.
$2.99
Stainless steel joiner fitting for joining multiple lengths of tubing. Recommended for 3/8" to 1/2" ID tubing. The barbs are slightly oversized at 13 mm (0.51"). Made from 304 stainless steel.
$4.39
Replacement O-Ring for plunger-style 1.5" tri-clamp sample valve. Compatible with FF120. Please note: the color of the o-ring may vary.
$2.19
Replacement sealing O-ring for 1.5" stainless tri-clamp spunding valves. Single ring. Made from EPDM. This is the O-Ring for the reservoir. Compatible with the BrewBuilt® and MB® tri-clamp spunding valves.
$3.29
Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use anywhere you want to make a sanitary connection. 2.5" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$11.49
High temp silicone grip provides a cool touch even with hot liquids! Ribbed grips allow quick comfortable tool-free operation Fits all male 1/2" NPT and BSP fittings 6.35 mm Duotight compatible stainless steel elbow barb tail The KegLand Stainless Steel Quick Connectors come with a heavy-duty silicone grip guard allowing comfortable and quick tool-free operation. Specs: Stainless steel and silicone construction Silicone O-ring seal is retained for perfect positioning but is easily cleaned or replaced 1/4" (6.35mm) OD elbow barb tail KegLand Part Number: KL31677
$8.79
Stainless steel barb adapter for 1/4" femaile pipe thread connections. For use with 1/4" or 5/16" ID tubing. Pack of 2.
$7.69
Stainless steel joiner fitting for joining multiple lengths of tubing. Recommended for 3/16" to 1/4" ID tubing. The barbs are slightly undersized at 6 mm (0.24"). Made from 304 stainless steel.
$4.39
3/4" female garden hose thread x 3/4" female garden hose thread. Maximum temperature rating - 195°F.
$11.99
Recirculate wort in your boil kettle without sacrificing one of your tri-clamp ports. The BrewBuilt Whirlpool Return Fitting & Thermowell Offset kit allows you to use any tri-clamp kettle's thermometer port to recirculate wort while also taking temp readings. This kit is perfect for kettles that only have two tri-clamp ports—eliminating the need to drill out a hole in your kettle to add a third port for wort recirculation. Attach your preferred valve or tri-clamp fitting to the side inlet and, during whirlpool, draw wort from your bottom port and pump it back through the Whirlpool Return Fitting. Kit Includes: Whirlpool Return Fitting Thermowell Offset (1) 1.5" Tri-Clamp (1) 1.5" Tri-Clamp Gasket (EPDM)
$87.99
Functions the same as a standard Hose Clamp, however rather than needing to find a screwdriver (or dime!) for every adjustment you can easily tighten by hand. As an added bonus, this also has a significantly smoother inside to the clamp, which will not tear up your tubing nearly as much as a standard hose clamp! Ideal for situations where you need to remove tubing from fittings to sanitize.
$2.99
An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 1/2" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06453
$3.89
End caps are used to close off an open tri-clamp port where a valve is not wanted or needed. Can be used to cap off a Kegmenter or the MoreWine!® Cellar Keg. For 4" tri-clamp fittings Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
$26.49
Tri Clamp adapter that goes from a 6 in TC to a 3 in TC.
$48.95
Brass - 1/2'' MPT x 1/4" FPT Bushing
$2.99
This is the female side of the Garden Hose Quick Disconnects. This set enables you to quickly and efficiently connect and disconnect lines from your Wort Chiller, Water Filter, or whatever else you feel could be improved through quicker connections! This product is designed to work in conjunction with our Male Garden Hose Quick Disconnect. Please Note: This product will NOT work with our Stainless or Plastic Quick Disconnects.
$12.99
Brass - 1/2" MPT X 3/8" Barb Elbow
$5.49 $2.99
This is a replacement brush for the Blichmann BeerGun Bottle Filler.
$6.62
If you're a brewer with an eye for detail, you’ll want to own this sight glass. The glass insert allows you to watch the flow of your beer during transfer. Place this Tri-Clamp Sight Glass in-line when you transfer your wort from kettle to fermenter. It is great for monitoring flow and to see how your in-line oxygenator is flowing. Made from 304-type stainless steel with Tri-Clamp ends. The maximum pressure is 150 PSI, about 10 bar. H664 features 1.5" TC connections and a 1" ID flow path. H664B features 1.5" TC connections and a 1.5" ID flow path H664C features 2" TC connections and a 2" ID flow path
$109.99
