Hardware and Fittings
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) Ball Valve
This Monotight ball valve can be used as an inline shut off valve on draft lines. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL21951
$2.19
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) Ball Valve
This Duotight ball valve can be used as an inline shut off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07474
$4.99
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) Plug
This Duotight plug is used to block up your 9.5 mm (3/8") tees, elbows or other fittings for gas leak testing or simply to plug an unused section. Features: Insert plug and firmly push to connect Release plug by pushing in the collet on the Duotight fitting Suitable for both gas & beverage applications Made from food-grade acetal plastic Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL06965
$1.79
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) x Female Beer Thread
This Duotight to Female Beer Thread (5/8" BSP) fitting is perfect for connecting gas line to keg couplers. Although it could be used with 9.5 mm EVA Barrier as a beverage line, this would only be recommended for long draw systems where the beverage line will be 20-25 ft long. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Compatible with EVABarrier 9.5 mm OD tubing (D1719). This Duotight fitting with 5/8" FPT is perfect for connecting gas line to keg couplers. Although it could be used with 9.5 mm EVA Barrier as a beverage line, this would only be recommended for long draw systems where the beverage line will be 20-25 ft long. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Keg coupler not included. Kegland Part number: KL06910
$4.99
-
Retaining Circlip for Duotight Push-In Fittings - Pack of 10 - 9.5 mm (3/8 in.)
Duotight 9.5 mm OD retaining clip. Locks Duotight fittings in their closed position, making it impossible for any hose to escape. Pack of 10. KegLand Part Number: KL21678
$4.39
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) Joiner
This Duotight joiner fitting is compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07016
$3.29
-
Rigid Plastic Joiner for Duotight Fittings | 6.35 mm
Creates perfectly straight, rigid joins with push-in fittings Simplifies connecting small accessories compared to using EVABarrier tubing 50mm length provides ample grip and easy disassembly, even after full insertion into two Duotight 6.35mm fittings This rigid joiner is made from strong polypropylene. It's useful to make rigid joins with push-in fittings that are dead straight. Although it's possible to make joins using short pieces of 6.35mm OD EVABarrier tubing, connecting small accessories together will be much easier when you use these instead. The 50mm length is long enough so even after pushing right into two Duotight 6.35mm fittings on both ends, you should still have an exposed length of about 3mm so you can still easily take the fittings apart later. 6.35mm OD x 50mm L (1/4" x 1.9"). KegLand Part Number: KL28790
$0.99 - $4.39
-
KOMOS® | Corny Keg O-Ring Kit
Put your ball lock or pin lock homebrew keg back into perfect working order with the KOMOS corny keg rebuild kit. Includes brand new o-rings for the keg lid, dip tubes, and keg posts / body connects. Comes in a convenient zip lock bag.
$4.49
-
Monotight Push-In Fitting - 8 mm (5/16 in.) x 1/2 in. BSP
Connect EVABarrier tubing to 1/2" male threads with this Monotight adapter. Compatible with EVABarrier 8 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18753
$2.99
-
KOMOS® | Silicone Tailpiece Gaskets | 10-Pack
These 5/8" silicone gaskets are used anywhere you're mounting a tailpiece. This could be on the back of your draft faucet shank or on either port of a commercial keg coupler. Comes in a convenient zip lock bag.
$6.59
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) Tee
This Monotight tee piece is perfect for splitting water or gas lines. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL2194
$2.99
-
KOMOS® | Sanke Keg Coupler Probe Washer | D-Style | 3-Pack
Replacement probe washers for D-Style Sanke keg couplers. Comes in a convenient zip lock bag.
$3.79
-
KOMOS® | Beer Faucet Tap Ferrule | Chrome | 5-Pack
For repairing a broken tap handle of building one from scratch. The tap ferrule is the piece you'll see at the bottom of most tap handles and is where the handle is screwed onto the faucet lever. You will also need hanger bolts (D2532) to screw the ferrule into a wood tap handle. 5/16" top threads and 3/8" bottom threads. Pack of 5. Comes in a convenient zip lock bag.
$15.49
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) x 3/4 in. BSP
Connect EVABarrier tubing to 3/4" male threads with this Monotight adapter. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL1388
$3.29
-
Replacement Internal Seal for Stainless Steel Ball Lock Caps - 5 Pack
Replacement internal seal for Stainless Carbonation and Line Cleaning Ball Lock Quick Disconnects. Only the stainless steel ball lock caps require these seals (KG50 & KG502). They are not needed for the Red & Yellow plastic versions. Comes in pack of 5. KegLand Part Number: KL21272
$2.19
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) Elbow
This Monotight elbow fitting will help routing gas or liquid lines in your kegerator or water filter setup. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL14052 Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL2194
$2.79
-
Duotight Push-In Fitting | Reducer Elbow | 8 mm (5/16") x 6.35 mm (1/4") Screw Lock
This Duotight elbow is mainly used where a stronger connection is required on a rigid port. One side is a standard 8 mm Duotight connection and the other side is a compression adapted Duotight Screw Lock connection for 6.35 mm (1/4") rigid fittings. This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. KegLand Part number: KL24624
$3.69
-
Duotight Push-In Fitting - 9.5mm (3/8 in.) Female Bulkhead
This Duotight fitting is designed to go through the wall of a tank, housing, or wall, similar to a pass through shank, so you can run EVABarrier tubing from one side to the other. Compatible with EVABarrier 9.5 mm OD tubing (D1719). With the lock nuts in place, there is approximately 1" of pass through threading. Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. KegLand Part Number: KL21012
$3.89
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) x 1/2 in. BSP
Connect EVABarrier tubing to 1/2" male threads with this Monotight adapter. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL14038
$2.99
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 9.5 mm (3/8 in.) Male Elbow
This elbow fitting has a 9.5 mm Duotight connection and a Duotight-compatible 3/8" OD barb. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18432
$2.99
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) Tee
This Duotight tee fitting is compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07023
$3.69
-
Replacement Seal Kit for A-Style Keg Coupler
Replacement gaskets and o-rings for German Slider (A-type) keg taps. KegLand Part Number: KL12331
$7.69
-
Replacement Knob for CO2 Tank
Replace a broken knob on your CO2 tank, or keep one on hand as a spare. Fits on Kegland CO2 tanks. This is the knob only. Does not included CO2 tank or any related hardware. KegLand Part Number: KL30625
$5.49
-
KOMOS® | Check Valve | 1/4 in. MPT x 1/4 in. Barb
Shutoff check valves can be used in multiple gas applications. Commonly added to CO2 regulators or manifolds to protect your equipment from back flow. 1/4" NPT check valve with 1/4" barb. Use with 3/16" or 1/4" ID gas line.
$10.99
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/4 in. BSP
This Duotight fitting with 1/4" male thread is a great option for connecting gas line to regulators and manifolds that have 1/4" FPT. Comes with seated O-ring. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL14441
$3.29
-
Brass Hex Nut for Draft Shanks
Replacement brass hex nut for standard beer shanks. KegLand Part Number: KL06286
$4.39
-
Monotight Push-In Fitting | 6.35 mm (1/4") Female x 1/4" BSP
Connect EVABarrier tubing to 1/4" female threads with this Monotight adapter. Compatible with EVABarrier 6.35 mm OD Tubing. This fitting is also a replacement part for the NukaTap Counter Pressure Filler that allows you to connect Ball Lock Caps (FE13 / FE146) to the body of the filler. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL08730
$3.89
-
Anvil Tri-clamp Sidewall Adapter | 1.5" T.C. x 1/2" MPT
The Tri-Clamp Sidewall Adapter is your ultimate solution for versatility. By simply placing the adapter to your sidewall with a 1/2" NPT standard fitting (7/8" hole), you can easily convert it to a Tri-Clamp in seconds, saving you both money and space by eliminating the need to maintain separate lines of NPT and Tri-Clamp equipment. This adapter is designed for seamless compatibility with most brewing kettles and fermenters, including the Anvil Brew Kettle, Bucket Fermenter, Crucible™ Conical Fermenter, Foundry™ Brewing System, and most brewing equipment.
$19.99
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) Female Bulkhead
This Monotight bulkhead works similarly to a pass through shank. Install wherever it may be needed and pass EVABarrier from one side to the other. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL21029
$3.29
-
KOMOS® | Vinyl Tailpiece Gaskets | 10-Pack
These 5/8" Vinyl gaskets are used anywhere you're mounting a tailpiece. This could be on the back of your draft faucet shank or on either port of a commercial keg coupler. Comes in a convenient zip lock bag.
$6.59
-
KOMOS® | Stainless Steel Tee | 3/8 in. Barbs
This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 10 mm OD (0.39") for a tighter fit with 3/8" ID tubing.
$5.49
-
KegLand Stainless Steel Shank Brackets | Retention Brackets for Square Draft Coils
Dump out the ice slurry from your jockey box without dumping out your draft coils Designed to pair with KegLand's Square Draft Coils Use the bracket holes as a guide for where to drill your shank holes These specially designed shank brackets from KegLand are a great accessory to pair with the Square Draft Coils for your custom jockey box build. The retention brackets will secure the coils in place so they don't come spilling out when you empty the ice slurry from your jockey box after use. Use the brackets as a guide to mark where to install your draft shanks, then mount them above the square coils and secure in place with the shank hex nuts. KegLand Part Number: KL40440
$21.99
-
KOMOS® | Stainless Steel Tee | 1/2 in. Barbs
This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 13 mm OD (0.51") for a tighter fit with 1/2" ID tubing.
$6.09
-
Keg Coupler Quick Disconnect (QD) | K-Lok Male x Male Beer Thread - Gas Side
Add the convenience of quick disconnects to your commercial sanke couplers. The K-Lok QD system will allow you to easily connect and disconnect your draft lines from your keg coupler with no spilling or loss of gas. This K-Lok Male x Male Beer Thread (5/8" BSP) is designed to be attached to your gas line and then connected to the K-Lok Female fitting attached to your keg coupler's gas in port. The built-in check valve prevents gas from draining out of your line when it's disconnected so it's a dry break. Draft lines can be connected to the Male Beer Thread end using a Duotight Adapter for EVABarrier tubing or Hex Nut & Tailpiece for other draft tubing. KegLand Part Number: KL04923
$15.49
-
Stainless Tri-Clamp Cross - 1.5 in.
This cross fitting features 1.5" T.C. connections at all ends and is made from high-quality stainless steel. 1.5" tri-clamp 5.75" long x 5.75" tall Made from 304 stainless steel
$32.99
-
Keg Coupler Quick Disconnect (QD) | K-Lok Male x Male Beer Thread - Beverage Side
Add the convenience of quick disconnects to your commercial sanke couplers. The K-Lok QD system will allow you to easily connect and disconnect your draft lines from your keg coupler with no spilling or loss of gas. This K-Lok Male x Male Beer Thread (5/8" BSP) is designed to be attached to your beverage line and then connected to the K-Lok Female fitting attached to your keg coupler's bev out port. The built-in check valve prevents liquid from draining out of your beer line when it's disconnected so it's a dry break. Draft lines can be connected to the Male Beer Thread end using a Duotight Adapter for EVABarrier tubing or Hex Nut & Tailpiece for other draft tubing. KegLand Part Number: KL04930
$21.99
-
Rolling Caster Kit | Set of 4
Upgrade the mobility and durability of your equipment with this premium 4-piece caster set. Designed for demanding environments, these casters pair non-marking, smooth-rolling polyurethane wheels with ultra-durable 304 stainless steel brackets. This combination ensures superior resistance to rust, corrosion, and chemicals, making them an ideal choice for medical carts, food service equipment, or industrial workstations that require frequent washdowns or exposure to harsh elements. The polyurethane wheels glide quietly while protecting your floors from scratches, offering the perfect balance of heavy-duty load capacity and shock absorption. The set includes two locking casters with easy-to-engage foot brakes for secure positioning, and two non-locking casters for smooth directional movement. Specs: Overall Height: 4" Locking Casters: 6" L x 2 1/2" W Non-Locking Casters: 3 1/2" L x 2 1/2" W Mounting Hole Pattern: 37mm (Horizontal) x 65mm (Vertical) Same for both locking and non-locking.
$79.99
You have seen 85 out of 85 products