Get Your Kegging Setup Under Pressure

Show previous products

• 

  CMBecker Ball Lock Quick Disconnect (QD) | Beverage Out | Barbed | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA

  1 review

  The highest quality plastic ball lock quick disconnect available to homebrewers Smooth operation—clicks into place on keg posts and is easily removed 1/4" barb for 1/4" or 3/16" ID draft line CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Black plastic clearly identifies the disconnect as the liquid out QD This black, beverage out quick disconnect comes with a barb for attaching to a beverage line, and it's made by CM Becker so you know it is high quality. The barb measures 1/4", so 3/16" beverage tubing is recommend for the perfect fit.  Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.

  Read more less

  $7.29

• 

  PVC Free Gas Tubing Assembly - Ball Lock Quick Disconnect (QD)

  9 reviews

  An upgraded version of our popular Gas Tubing Assembly. Our new assembly now includes 5 ft of 5/16" Ultra Barrier Gas™ PVC Free Beer Tubing, ball lock gas-in quick disconnect (barb) and two hose clamps. EJ Beverages' cutting edge Ultra Barrier Gas™ tubing has a number of advantages over regular Vinyl tubing: Clear tubing with red stripe for identification as low pressure gas line PVC Free and BPA Free - containes no DEHP phthalates or other plasticizers Environmentally friendly production - does not emit dioxins Remains flexible at lower temperatures Temperature range of -40 to 125° F Pressure rated up to 60 psi

  Read more less

  $16.99

• 

  Corny Keg Ball Lock Quick Disconnect (QD) Jumper Line

  24 reviews

  Connect two ball lock homebrewing kegs together via their ball lock our fittings. Handing for moving sanitizer or beer from one keg to the next. We often use this fitting when we have a big party where we dixie chain kegs together.  For example if you made 10 gallons of pale ale you can use this jumper to connect the two kegs so that all 10 gallons can pour at once.  

  Read more less

  $17.99

• 

  CMBecker Inline Check Valve | Quick Disconnect (QD) | Flared

  8 reviews

  1/4" flared inline check valve can be used with any flare threaded ball lock or pin lock quick disconnect Allows gas to flow out, but won't allow backflow of liquid into your gas system Ideal safety measure if you force carbonate your beer using the bev out dip tube Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs (male flare threaded side only) CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Add this inline check valve to any flared gas-in disconnect and protect your draft system! The check valve allows gas to flow out, but won't allow backflow of liquid into your gas system. Many manifolds and regulators already feature check valves, but this disconnect will keep liquid from ever entering your gas lines in the first place. Especially handy if you force carbonate your beer using the bev out dip tube! Why we love it: Because we've had beer shoot back into our gas line and that sucks. At some point you will have a keg that is pressurized more than the pressure in your gas system. This could be caused by different carbonation levels, a keg sitting at room temperature, etc. So for example if the pressure in your keg is at 20 psi and your regulator is set at 12 psi, when you connect your gas in quick-disconnect liquid shoots from the keg into the gas line. Eliminate that possibility with this ingenious fitting. If you're looking for a ball lock disconnect with a built-in check valve, we highly recommend KEG729. However, the beauty of this inline check valve is that it can be used with any flared disconnect, including pin locks. If you don't want to part with your high-quality stainless steel disconnects, this inline check valve is for you!

  Read more less

  $9.99

• 

  Ball Lock Post Bulkhead - Bev Out

  6 reviews

  This bev out ball lock bulkhead assembly allows you to add a ball lock post just about anywhere. Use in conjunction with the gas in bulkhead to create your own pressure vessel. The included short dip tube can be replaced with a longer dip suitable to your needs. 1/4" BSP threads and locking nut. Kegland Part Number: KL03162

  Read more less

  $14.49

• 

  74g Cartridge Adapter for KegLand Core 360 Mini CO2 Regulator

  This adapter can be installed on the Core 360 Mini Regulator from Kegland in order to use 74 gram CO2 cartridges. Use a crescent wrench to remove the stock adapter piece for 12 gram cartridges and simply screw in this adapter with 5/8-18 UNF female threading. Switching to 74 g cartridges will allow you dispense 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required. TR21-4 Male Thread x 5/8-18 UNF Female Thread Adapter only. Regulator and CO2 cartrdige sold separately. KegLand Part Number: KL2041

  Read more less

  $5.49

• 

  KegLand Mini Keg | Stainless Pressurizable Beer Keg | 4L | 1 Gallon

  Perfect for serving your craft creations on the go or making a compact home draft system that fits inside your refrigerator Welded from the inside out using a specialized technique for superior, more sanitary welds compared to similar mini kegs Interlocking chimes for easy and secure stacking of multiple mini kegs KegLand's Small Stainless Steel Mini Beer Kegs are ideal for homebrewing small batches and serving your craft creations directly from your home fridge. These compact kegs are designed for convenience and versatility. Flexible Dispensing and Carbonation You can naturally carbonate your beer using priming sugars or, for a more controlled approach, force carbonate and serve with the Ball Lock Tapping Head. The Tapping Head features a flexible silicone dip tube, allowing you to dispense beer whether the keg is standing upright or lying on its side. The dip tube will sink and draw liquid from the bottom, allowing you to orient the keg whichever way is more convenient in your refrigerator. Superior Quality and Durability KegLand's mini kegs are built to last, undergoing acid bath electrolysis to passivate the stainless steel, making them exceptionally resistant to rust. These are the only mini kegs on the market that are welded from the inside out using a specialized technique. This results in a superior, more sanitary welding finish compared to other mini kegs. When you choose a KegLand mini keg, you're investing in the highest quality available, surpassing the standards of other mini kegs of similar design. Low2 Lid O-Ring The sealing cap features an O-ring made of KegLand's special Low2 material which offers vastly improved oxygen barrier properties compared to silicone or EPDM, resulting in your beverage staying fresher for longer. Expand Your Setup with Accessories Enhance your mini keg experience with a range of available accessories, including neoprene jackets for insulation and compact tapping systems for easy dispensing. Stackable with the 2L Mini Keg. Specs: 4L / 1 Gal / 135 fl oz 11" High x 5.3" Diameter (280mm x 135mm) Max Working Pressure: 45 PSI / 3 Bar Made from 304 Stainless Steel KegLand Part Number: KL06354  

  Read more less

  $49.99

• 

  Kegland Ball Lock Keg | Corny Keg | 2.5 gal.

  20 reviews

  Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   New Corny Keg ready to use right out of the box New Kegs are trouble-free for years Rubber top and bottoms protect floors from dings Lid includes a tab wth hole welded in so you can hang anything from lid (dry hop our favorite) 304 Stainless Steel and great welds, this will last a tifetime Features Low2 Keg Lid O-ring which offers a 96% reduction in oxygen ingress compared to silicone. Ditch the bottles and start kegging today! Save time, reduce the risk of infection and get all those bottles out of the kitchen for good! Brand new 2.5 gallon Kegland kegs offer convenience, security and insurance when compared to used or reconditioned kegs. There's no need to replace gaskets or other parts, no need to trust that someone else did a good job with reconditioning, and no possibility of residual flavor or aromas getting into your beer! These Premium 2.5 gal kegs have a lid with an internal tab/hook under the lid designed specifically for attaching dry hopping bags. Features: 130 PSI Operating Pressure 2.5 Gallon (9.5 L) Capacity Dry Hop Tab Welded into Lid 304 Stainless Steel Dimensions: Height: 14.5 in. Diameter: 8.375 in. Kegland Part Number: KL02882

  Read more less

  $120.99

• 

  Faucet Quick Disconnect (QD) Assembly - Ball Lock

  18 reviews

  This portable keg faucet will surely have your friends saying "Dang, that is way classier than a picnic tap!"    This Quick Disconnect Faucet Assembly comes in handy when you take your keg with you to a gathering. Pair it with a small CO2 injector (KEG950), and you won’t have to mess with tubing when you’re away from home.    Complete assembly. Comes with QD faucet adapter, stainless faucet, faucet knob and ball lock beverage out quick disconnect.

  Read more less

  $43.99

• 

  Torpedo Keg | Ball Lock Keg | Stainless Steel Corny Keg | Low2 Keg Lid O-Ring | Superior Oxygen Barrier Properties | 15 Gallon

  Super-sized corny keg, great for bigger batches and fermentation Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg! Has the size and strength of a 15.5-gal commercial keg with the easy to open/clean/fill of a homebrew keg Brand new, all-stainless construction ball lock keg Stackable with ball lock quick disconnects in place Etched In and Out labels near the keg posts for easy identification Rolled handles for a comfortable grip Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams Look out below! The Torpedo Keg Depth Charge series just dropped and they're set to send blast waves through the homebrew world. Large-scale homebrewers will appreciate the ability to fit their entire batch into a single 15-gallon ball lock keg, and you can expect the same great features that have made Torpedo Kegs such a hit. Laser welded construction for superior quality, rolled stainless steel handles that will last a lifetime, and stackable design that won't interfere with your fittings. Quality First The first thing we at MoreBeer! check out is interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. These kegs are machine welded and exceed our standards for quality. The weld quality is possible because these kegs made by an ISO certified commercial keg manufacturer. Cool Features Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving, which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. In and Out is etched near the keg posts for easy identification, which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake. Low2 Keg Lid O-ring Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Specifications: Total Capacity: 15.2 gal. Max Pressure: 130 psi PRV Rating: 85 psi Height: 24.75" Diameter: 16.05" Made from 304 Stainless Steel

  Read more less

  $239.99

• 

  CO2 Cartridge - 74 g

  5 reviews

  These cartridges give the oomph to your mini-regulator dispensing unit! Perfect for dispensing your beer on the go. For use with the Torpedo Mini CO2 Regulator (KEG965A). One canister will push between 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required. 5/8-18 threading. Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.

  Read more less

  $18.49

• 

  Dip Tube | Gas In | Corny Keg Part

  4 reviews

  For the gas in side. Stainless steel construction, approximately 1.5" in length.

  Read more less

  $5.49

• 

  Gas Tubing Assembly - Ball Lock Quick Disconnect (QD) - 5/16 in.

  18 reviews

  You'll love the convenience of using this complete gas tubing assembly for draft beer dispensing. This Gas Tubing Assembly includes a ball lock gas-in quick disconnect fitting, 5 feet of 5/16" gas tubing, and two hose clamps. It's more convenient than having to hunt down all of the individual parts yourself. You'll find several places you can use this assembly in your homebrewing configuration.

  Read more less

  $14.99

• 

  KegLand Ball Lock Quick Disconnect (QD) | Beverage Out | Integrated Tap Shank & Collar

  3 reviews

  An ideal quick disconnect option for mobile draft dispensing! No fussing with adapters, adding multiple points of failure. Simply attach your draft faucet! Pairs perfectly with the NukaTap Flow Control faucet so you can adjust beverage flow when you're on the go When you're serving beer out in the wild, it's best to keep things simple. This ball lock quick disconnect does just that by allowing you to connect your beer faucet directly without the need for a separate adapter. Leave the draft line and picnic tap at home and pour beer directly from your ball lock keg! Compatible with NukaTap, Intertap and standard beer faucets. We highly recommend the NukaTap Flow Control faucet for use with this ball lock QD. Being able to dial in the flow on a portable draft setup can be a huge advantage and means less fussing with the gas pressure. As the FC model uses the hard plastic flow control shuttle to form a seal, it's best to use a collar pin wrench to firmly tighten the connection. For a little extra insurance, pair the faucet with the Self-Closing Spring to keep the tap closed when not in use. KegLand Part Number: KL22859

  Read more less

  $14.49

• 

  Kegland | 64 oz | 1/2 Gallon | Ball Lock | Corny Keg | Single Metal Handle

  3 reviews

  Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late August. Possibly the smallest keg you can make that will fit a corny-style keg lid. This half gallon ball lock keg works perfectly as a pressurizable growler that doesn't require any special fittings or accessories beyond the ball lock draft equipment you probably already own. If you've been considering a permanent soda water line on your draft system, this is the ideal keg to use with the KegLand Continuous Soda Carbonator Keg Lid. The low volume of this corny keg will allow the Carbonator Keg Lid to almost instantly carbonate water as it refills the keg after every pour. This little guy also works great as a line cleaning keg using a small batch of cleaning solution. 5.9" W x 9.9" H KegLand Part Number: KL20893  

  Read more less

  $87.99

• 

  CMBecker Ball Lock Quick Disconnect (QD) | Gas In | Barbed | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA

  3 reviews

  The highest quality plastic ball lock quick disconnect available to homebrewers Smooth operation—clicks into place on keg posts and is easily removed 1/4" barb for 1/4" or 3/16" ID draft line CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Gray plastic clearly identifies the disconnect as the gas in QD This is a high quality plastic quick disconnect made by CM Becker for your gas line. Barb is 1/4". 1/4" or 3/16" beverage tubing is recommended for gas line. Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.

  Read more less

  $7.29

• 

  KegLand Mini Keg | Stainless Pressurizable Beer Keg | 5L | 1.3 Gallon

  1 review

  Perfect for serving your craft creations on the go or making a compact home draft system that fits inside your refrigerator Welded from the inside out using a specialized technique for superior, more sanitary welds compared to similar mini kegs Interlocking chimes for easy and secure stacking of multiple mini kegs KegLand's Small Stainless Steel Mini Beer Kegs are ideal for homebrewing small batches and serving your craft creations directly from your home fridge. These compact kegs are designed for convenience and versatility. Flexible Dispensing and Carbonation You can naturally carbonate your beer using priming sugars or, for a more controlled approach, force carbonate and serve with the Ball Lock Tapping Head. The Tapping Head features a flexible silicone dip tube, allowing you to dispense beer whether the keg is standing upright or lying on its side. The dip tube will sink and draw liquid from the bottom, allowing you to orient the keg whichever way is more convenient in your refrigerator. Superior Quality and Durability KegLand's mini kegs are built to last, undergoing acid bath electrolysis to passivate the stainless steel, making them exceptionally resistant to rust. These are the only mini kegs on the market that are welded from the inside out using a specialized technique. This results in a superior, more sanitary welding finish compared to other mini kegs. When you choose a KegLand mini keg, you're investing in the highest quality available, surpassing the standards of other mini kegs of similar design. Low2 Lid O-Ring The sealing cap features an O-ring made of KegLand's special Low2 material which offers vastly improved oxygen barrier properties compared to silicone or EPDM, resulting in your beverage staying fresher for longer. Expand Your Setup with Accessories Enhance your mini keg experience with a range of available accessories, including neoprene jackets for insulation and compact tapping systems for easy dispensing. Stackable with the 8L and 10L Mini Keg. Specs: 5L / 1.3 Gal / 169 fl oz 11" High x 6.8" Diameter (280mm x 175mm) Max Working Pressure: 45 PSI / 3 Bar Made from 304 Stainless Steel KegLand Part Number: KL06361  

  Read more less

  $64.99

• 

  Flare Fitting - 1/4 in. MFL x 1/4 in. Barb

  5 reviews

  Stainless steel flare fitting used in draft beer systems for various configurations.   

  Read more less

  $3.49

• 

  Curved Dip Tube | Beverage Out | Ball Lock Kegs Only | Corny Keg Part

  2 reviews

  Replacement curved dip tube for the beer side out on Cornelius style ball lock kegs. Made from Stainless Steel. Does not include the dip tube gasket.  

  Read more less

  $16.49

• 

  5.16 Gallon Sanke Keg | 1/6 bbl | Sixtel | US D-Style Spear | New | Stainless Steel Beer Keg | Certified Commercial Quality

  3 reviews

  Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear Sixth Barrel Keg holds 55x 12 oz beers or 41x 16 oz pints Compact and easy to fit multiple kegs in home kegerators or keezers Commercial quality construction—produced and tested in an ISO 9001 Certified facility Supply your brewery with the best kegs on the market with these 5.16 gallon 1/6 Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery. The sixth barrel keg, commonly referred to as a sixtel keg, is a great option for bars and restaurants that want to offer a variety of beers but don't have the space for multiple full size kegs. They're also a great option for kegerators, as two or three sixtels will fit inside depending on the model. Holds 55 x 12 oz beers (41 x 16 oz pints). Features: 5.16 gal (1/6 bbl) US Sanke keg 304 Stainless Steel Construction 23" Height, 9.25" Diameter MicroMatic D System (U.S. Sankey) Spear Working pressure is 43.51 psi (3.0bar)  

  Read more less

  $98.99

• 

  Corny Keg Rinser | Ball Lock Quick Disconnect (QD)

  21 reviews

  Rinse out your ball lock corny keg without disassembling the keg posts and dip tubes Connect to your garden hose spigot and flush with water with the keg upside down Quick and convenient way to wash out residue from a spent keg before it hardens An inexpensive, time-saving assembly for rinsing out your Ball Lock kegs. You've just finished a keg of your homebrew. Most of us set that keg aside and clean it later when we brew up the next batch. As it sits it gets harder to clean and then we definitely have to disassemble the entire keg to scrub all the parts.  Well for years our Metal Shop Manager and lead Product Designer, Darren Schleth, has been using a simple keg cleaner in our R&D brewery to rinse his kegs, while upside down, through the body connects.  The keg is instantly rinsed while all the residue is still soft.  The keg can then later be soaked with PBW and/or sanitized without having to remove the body connects or poppets.  This saves lots of time. As employees at MoreBeer! saw this simple assembly everybody wanted one of their own.  To use: Connect the brass garden hose attachment to a garden hose. Then connect the grey and black quick disconnects to the inlet and outlet body connects on your Ball Lock keg.  Remove the lid and  turn the keg upside down. Turn on the water. Water risnes through both the inlet and outlet dip tubes completely rinsing the inside of the keg.

  Read more less

  $23.99

• 

  KegLand Mini Keg | Stainless Pressurizable Beer Keg | 8L | 2.1 Gallon

  1 review

  Perfect for serving your craft creations on the go or making a compact home draft system that fits inside your refrigerator Welded from the inside out using a specialized technique for superior, more sanitary welds compared to similar mini kegs Interlocking chimes for easy and secure stacking of multiple mini kegs KegLand's Small Stainless Steel Mini Beer Kegs are ideal for homebrewing small batches and serving your craft creations directly from your home fridge. These compact kegs are designed for convenience and versatility. Flexible Dispensing and Carbonation You can naturally carbonate your beer using priming sugars or, for a more controlled approach, force carbonate and serve with the Ball Lock Tapping Head. The Tapping Head features a flexible silicone dip tube, allowing you to dispense beer whether the keg is standing upright or lying on its side. The dip tube will sink and draw liquid from the bottom, allowing you to orient the keg whichever way is more convenient in your refrigerator. Superior Quality and Durability KegLand's mini kegs are built to last, undergoing acid bath electrolysis to passivate the stainless steel, making them exceptionally resistant to rust. These are the only mini kegs on the market that are welded from the inside out using a specialized technique. This results in a superior, more sanitary welding finish compared to other mini kegs. When you choose a KegLand mini keg, you're investing in the highest quality available, surpassing the standards of other mini kegs of similar design. Low2 Lid O-Ring The sealing cap features an O-ring made of KegLand's special Low2 material which offers vastly improved oxygen barrier properties compared to silicone or EPDM, resulting in your beverage staying fresher for longer. Expand Your Setup with Accessories Enhance your mini keg experience with a range of available accessories, including neoprene jackets for insulation and compact tapping systems for easy dispensing. Stackable with the 5L and 10L Mini Keg. Specs: 8L / 2.1 Gal / 270 fl oz 16" High x 6.8" Diameter (280mm x 175mm) Max Working Pressure: 45 PSI / 3 Bar Made from 304 Stainless Steel KegLand Part Number: KL06378  

  Read more less

  $74.99

• 

  Torpedo Keg Ball Lock Quick Disconnect (QD) Kit | Flared | Gas In & Bev Out

  $43.99

• 

  Counter Pressure Bottle Filler

  67 reviews

  The counter pressure bottle filler that sets the standard for filling beer bottles at home.  With a unique one way valve and adjustable pressure relief you will be bottling sediment free homebrew with ease.   If you currently carbonate and store your homebrew in kegs, you can use a counter pressure filler to bottle beer directly from your kegs. One huge advantage of this method is that since you are bottling already carbonated, clear beer, there will be no sediment at the bottom of your bottles. Counter pressure bottle filling is how a brewery bottles beer. The bottle is under pressure while the carbonated beer flows in. Because the interior of the bottle is pressurized there is minimal loss of the CO2 in solution. The opposite of filling under pressure is when you pour a beer into a pint glass where CO2 erupts out of solution creating all that foam. Great in your glass but not good when you are trying to bottle carbonated beer. Our counter pressure filler mimics a single filling head on a professional bottling line, a concept that we all know works very, very well. Made by Fermentap, the design has two unique features. Number 1 it is the only model made entirely from stainless steel. Number 2 you flush and fill from the bottom of the bottle. Beer barb is 3/16". Gas barb is 5/16". Features While some models flush the bottle from the top and fill from the bottom, our unit features a special valve that allows CO2 and beer to flow down the same stainless tube, directly to the bottom of the bottle. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you switch the valve position and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and no foam during the filling process - not to mention that the whole thing takes one-hand to operate! Why hope that you flushed your bottle properly using a type of beer gun, when you can know for sure that you have created the best environment for your beer to be stored at by using a Counter Pressure Bottle Filler? More Details The unit is inserted into the bottle in the off position. The valve is then turned to CO2 to flush the bottle and then to beer for filling. The adjustable pressure relief on the side of the unit allows you control the speed of fill by adjusting the pressure in the bottle. The valve is positioned in such a way that it is easy to use with one hand, while the other holds the bottle. This model is designed for 12oz bottles but can easily be extended to accommodate larger bottles, such as 22oz, with a small piece of 1/4" tubing. Setting Your PSI Pressure Before you counter pressure fill a bottle make sure you are satisfied with the carbonation level and flavor. The goal for counter pressure bottle filling is to store your beer in the most sanitary and clean environment possible so when you get ready to share your homebrew its presentation is perfect when you go to pour. An ideal set point to set your PSI level on your regulator is 10-14 psi. This range is dependent upon the temperature of your beer and the carbonation level. We recommend you start at a lower pressure around 10psi for the first 2-3 bottles to make sure you get everything dialed in before committing to filling a whole case. Make sure your keg is always kept cold. If your keg warms up you will have foaming issues.     

  Read more less

  $76.99

• 

  Deluxe Counter Pressure Bottle Filler

  58 reviews

  We think our Counter Pressure Bottle Filler is the best on the market, and the Deluxe Counter Pressure Filler takes a proven design to the next level by adding a pressure gauge for monitoring bottle pressure and flared connections for easy cleaning. The gauge on this counter pressure bottle filler allows you to know the pressure in your bottle, an incredibly handy feature. The flared connections allow for easy cleaning as you can connect on or disconnect your lines in a matter of seconds. Traditionally these lines can be difficult to sanitize because they were permanently connected with hose clamps. Still has all the great feature of our original All Stainless Construction (except for a brass backing on the pressure gauge) A true Counter Pressure Filler (for less foaming) Easy to use Stainless 3-way ball valve on top Adjustable Stainless pressure release on side Flushes bottle from the bottom not the top What is a Counter Pressure Filler? If you currently carbonate and store your homebrew in kegs, you can use a counter pressure filler to bottle beer directly from your kegs. One huge advantage of this method is that since you are bottling already carbonated, clear beer, there will be no sediment at the bottom of your bottles. Counter pressure filling is how a brewery bottles beer. The bottle is under pressure while the carbonated beer flows in. Because the interior of the bottle is pressurized there is minimal loss of the CO2 in solution. The opposite of filling under pressure is when you pour a beer into a pint glass where CO2 erupts out of solution creating all that foam. Great in your glass but not good when you are trying to bottle carbonated beer. Our counter pressure filler mimics a single filling head on a professional bottling line, a concept that we all know works very, very well. Features While some models flush the bottle from the top and fill from the bottom, our unit features a special valve that allows CO2 and beer to flow down the same stainless tube, directly to the bottom of the bottle. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you switch the valve position and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and no foam during the filling process - not to mention that the whole thing takes one-hand to operate! Why hope that you flushed your bottle properly using a type of beer gun, when you can know for sure that you have created the best environment for your beer to be stored at by using a Counter Pressure Bottle Filler? More Details The unit is inserted into the bottle in the off position. The valve is then turned to CO2 to flush the bottle and then to beer for filling. The adjustable pressure relief on the side of the unit allows you control the speed of fill by adjusting the pressure in the bottle. The valve is positioned in such a way that it is easy to use with one hand, while the other holds the bottle. This model is designed for 12oz bottles but can easily be extended to accommodate larger bottles, such as 22oz, with a small piece of 1/4" tubing. Setting Your PSI Pressure Before you counter pressure fill a bottle make sure you are satisfied with the carbonation level and flavor. The goal for counter pressure bottle filling is to store your beer in the most sanitary and clean environment possible so when you get ready to share your homebrew its presentation is perfect when you go to pour. An ideal set point to set your PSI level on your regulator is 10-14 psi. This range is dependent upon the temperature of your beer and the carbonation level. We recommend you start at a lower pressure around 10psi for the first 2-3 bottles to make sure you get everything dialed in before committing to filling a whole case. Make sure your keg is always kept cold. If your keg warms up you will have foaming issues. 

  Read more less

  $109.99

• 

  XpressFill XF2200 | Open Fill | Carbonated Beverage Can Filler | 2 Spout

  Suitable for carbonated beverages such as beer and kombucha Purges with CO2 prior to filling Adjustable shelf to accommodate cans up to 11.5" tall and 4" in diameter Made to order in the United States The XF2200 can filler is designed for the Artisan Craft Person looking to fill cans with carbonated beverages in a simple and affordable manner. The filler can accommodate most cans sizes with its adjustable shelf, allowing great flexibility, and is suitable for carbonated beverages such as beer and kombucha. The XF2200 is based on the XpressFill Level Filler with modified valves and flow path diameters resulting in a much better flow of product with less foaming and better CO2 retention. The filler will accommodate cans up to 4 inches in diameter and up to 11.5 inches tall. Each filler is hand built to order in the California factory. Lead times average about 3 weeks. Features & Specifications: 360 cans per hour capacity (12 oz) All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Purges with CO2 prior to filling Includes silicone tubing to fill from bottom  Maximum Can Dimensions: 4" D x 11.5" H Maximum Operating Pressure: 12 psi Weight: 22 lbs Dimensions: 12" wide x 17" high x 15.5" deep Requires 0.7A of 115V 50/60Hz power  

  Read more less

  $2,795.00

• 

  XpressFill XF4500C | Carbonated Beverage Can Filler | 2 Spout

  2 reviews

  Counter pressure can filler for carbonated beverages CO2 purge cycle prior to fill reduces head space O2 Flow stops automatically at the desired height Suitable for standard 12 oz and 16 oz cans as well as tall 19.2 oz cans Made to order in the United States The XF4500C counter-pressure can filler is designed for the Artisan Craft Person looking to can carbonated beverages in a simple way. The carbonated beverage filler is a counter pressure can filler that fills cans from a pressurized source, such as a keg, without losing carbonation; using a sensor probe that shuts off the fill at the desired height. This filler was designed to be technically sophisticated, while operationally very simple. Even though this machine is designed for carbonated beverages, such as beer and kombucha, it can also be used for still products, using a pressurized keg or pump. The XF4500C can be used with can sizes that have the standard 12 and 16 oz lid opening, including tall 19.2 oz cans, allowing great flexibility. The XF4500C requires that you also have an air compressor, which is used to hold the can rest in place, a canister of CO2, to pressurize and carbonate your tank or keg, and a pressurized container, to allow your product to flow from high to low pressure, through the machine. Each beverage filler is hand built to order in the California factory. Lead times average about 3 weeks. Features: One-person, ergonomic canning operation Adjustable fill height and level sensor for consistent filling Adaptable to various can sizes Easy to clean CO2 purge cycle prior to fill reduces head space O2 Greatly reduce product waste from overfill Can be used for both nitrogenated and carbonated products Light, stainless steel and anodized aluminum construction All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Specifications: Applications: beer, kombucha, soda, sparkling wine, cider Capacity: 360 cans per hour (12 oz) Weight: 40 lbs Dimensions: 16" wide x 21" high x 15" deep Requires 2.0A of 115V 50/60Hz power  

  Read more less

  $5,895.00

• 

  Ss Brewtech Keg WaSsher

  26 reviews

  Another great invention coming out of Ss Brewtech, the Keg WaSsher! This is a hands free, clean in place keg washer that will make cleaning kegs one of the easiest steps of the brewing process. Gone are the days of disassembling your keg to clean it. The cleaning process is pretty simple. Just take the keg lid off, attach the keg washer, attach both ball lock QDs, stick the whole thing upside down in a bucket full of sanitizer, turn on the pump and your keg is clean. The Keg WaSsher is designed to fit in a standard 5 gallon bucket. It also only uses 2 gallons of cleaning solution resulting in less chemical waste and evironmental impact. If you want to get fancy, you can set up a wash station with 3 buckets to perform an initial cleaning, fresh water rinse, and sanitizer. All you have to do is lift the whole apparatus from one bucket to the next! Features: Hands free operation Chemical resistant submersible pump Attaches to common ball-lock Cornelius-style kegs w/ removable lids Powerful CIP spray ball Entire assembly fits in 5-gallon bucket Cleans inside of keg and ports simultaneously Easily attaches/detaches from kegs Perform clean, rinse, and sanitize steps all with the same unit

  Read more less

  $249.95

• 

  Slimline Torpedo Keg Sleeve

  These neoprene keg sleeves are custom tailored to fit the Slimline Torpedo Kegs. We were tired of poorly designed sleeves that dragged in the mud and interfered with fittings. The Torpedo Keg Sleeve is designed to only cover the area that needs insulation, leaving the chimes bare and the fittings easily accessible. These little guys will keep your keg colder longer, and give it a clean look while doing so. The sleeves are 6mm thick and feature stitched piping on the edges for exceptional durability. Also compatible with standard cornelius kegs. For standard Torpedo Keg sleeves see KEG650. SKU Size Diameter Height KEG651A 1.5 gal 8.25" 6.25" KEG651B 2.5 gal 8.25" 10.5" KEG651C 5 gal 8.25" 20"

  Read more less

  $19.99 - $29.99

• 

  Torpedo Keg Sleeve

  These neoprene keg sleeves are custom tailored to fit the standard line of Torpedo Kegs. We were tired of poorly designed sleeves that dragged in the mud and interfered with fittings. The Torpedo Keg Sleeve is designed to only cover the area that needs insulation, leaving the chimes bare and the fittings easily accessible. These little guys will keep your keg colder longer, and give it a clean look while doing so. The sleeves are 6mm thick and feature stitched piping on the edges for exceptional durability. Make sure you get the correct sleeve for your Torpedo keg as we sell two different diameters. For Slimline Torpedo Keg sleeves see KEG651. The 5-gallon sleeve is also compatible with 1/6 bbl or sixtel commercial sanke kegs. SKU Size Diameter Height KEG650A 1.5 gal 9.125" 6" KEG650B 2.5 gal 9.125" 10" KEG650C 5 gal 9.125" 18"

  Read more less

  $19.99 - $24.99

• 

  KegLand Ball Lock Quick Disconnect (QD) | Gas In | Stainless Steel | Flared

  16 reviews

  304 cast stainless steel ball lock quick disconnect made for high-durability White ring above the outer bushing to identify the QD for gas use Compatible with all ball lock style homebrew kegs 1/4" flare thread connection This is a ball-lock type quick disconnect that is constructed from stainless steel for lifetime longevity. This product is for the White Gas In connection, for the Black Beverage Out connection, see our KEG732. 2 1/8" H Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless. Kegland Part Number: KL03001

  Read more less

  $18.99

• 

  KegLand Ball Lock Quick Disconnect (QD) | Gas In | Stainless Steel | Barbed

  304 cast stainless steel ball lock quick disconnect made for high-durability White ring above the outer bushing to identify the QD for gas use Compatible with all ball lock style homebrew kegs 1/4" barb connection This is Ball Lock Quick Disconnect is constructed from stainless steel for lifetime longevity. 1/4" barb. This QD is for the Gas In side. 2-1/8" H Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless. Kegland Part Number: KL02981

  Read more less

  $18.99

• 

  Replacement Silicone Elbow for PCO38 Tapping Head

  This silicone elbow is a replacement for the elbow provided in the PCO38 Tapping Head Kit. Allowing for a 90° connection between the barb on the yellow liquid plastic carbonation cap and the 6.3 mm OD dip tube provided in the kit. KegLand Part Number: KL26260

  Read more less

  $2.19

• 

  Gas Tubing Assembly - Ball Lock Quick Disconnect (QD) - 1/4 in.

  Includes ball lock gas-in quick disconnect (barb), 5 ft of 1/4" ID tubing, and two hose clamps.

  Read more less

  $14.99

• 

  Torpedo™ Mini CO2 Regulator Kit - Ball Lock Quick Disconnect (QD)

  18 reviews

  A portable mini-regulator with all the features of a full sized regulator! Perfect for parties and gatherings where you don’t want to haul around a large canister and hoses. A lot of great features packed into a very small package. The regulator has a range of .5-1.5 bars (7-21 psi). This means that, unlike KEG950 that shoots in CO2 at fixed pressure, the mini-reg allows you precisely dial in pressure and keep it there. It utilizes a disposable 74 gram CO2 cartridge, which is the largest size that can be shipped full. This is a two stage mini-regulator, meaning that it takes the pressure down from 800psi (cartridge pressure) to a lower pressure and then to your set pressure of around 10psi. Two stage regulators are the only way to have consistent pressure. One 74 gram cartridge will typically dispense one 5 gallon keg. Comes with regulator, one gas-in quick disconnect and the associated hardware. 74 gram CO2 cartridges (KEG962) are available separately. KEG969 cartridges are not compatible with this regulator.

  Read more less

  $87.99

• 

  CMBecker Pin Lock Quick Disconnect (QD) | Gas In | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA

  The highest quality plastic ball lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Gray plastic clearly identifies the disconnect as the gas in QD Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany. Red and grey quick disconnects are used for the gas in tank plug. 1/4" male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

  Read more less

  $7.99

• 

  XpressFill XF2500 | Carbonated Beverage Bottle Filler | 2 Spout

  1 review

  Counter pressure bottle filler for carbonated beverages Flow stops automatically at the perfect height in the bottle neck every time, regardless of bottle variations Accommodate bottles up to 13.5" tall and up to 4" in diameter Made to order in the United States The Carbonated Beverage Filler is a counter-pressure machine that fills bottles with pre-carbonated beverages without losing carbonation; The XpressFill Carbonated Beverage Filler uses a high-tech sensor probe that shuts off the fill at the perfect height in the bottle neck every time, regardless of bottle variations. Even though this machine is designed for carbonated beverages, it can also be used for still products as long as they are fed to the filler using a lightly pressurized keg or pump. That means that you can use this for your normal bottling as well as for those special bottle-conditioned beers too! The Carbonated Beverage Filler is also suitable for filling Charmat-style sparkling wines, at a maximum operating pressure of 60 psi. The filler will accommodate bottles up to 4 inches in diameter and up to 13.5 inches tall. This covers most standard sized 12 oz, 22 oz and 750 mL bottles. Each bottle filler is hand built to order in the California factory. Lead times average about 3 weeks. Features & Specifications: 200 Bottles per Hour capacity (12 oz) All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Maximum Bottle Dimensions: 4" D x 13.5" H Maximum Operating Pressure: 60 psi Weight: 32 lbs Dimensions: 16 inches wide x 17 inches high x 15.5 inches deep Requires 1.5A of 115V 50/60Hz power  

  Read more less

  $3,895.00

• 

  KegLand Mini Keg | Stainless Pressurizable Beer Keg | 10L | 2.6 Gallon

  1 review

  Perfect for serving your craft creations on the go or making a compact home draft system that fits inside your refrigerator Welded from the inside out using a specialized technique for superior, more sanitary welds compared to similar mini kegs Interlocking chimes for easy and secure stacking of multiple mini kegs KegLand's Small Stainless Steel Mini Beer Kegs are ideal for homebrewing small batches and serving your craft creations directly from your home fridge. These compact kegs are designed for convenience and versatility. Flexible Dispensing and Carbonation You can naturally carbonate your beer using priming sugars or, for a more controlled approach, force carbonate and serve with the Ball Lock Tapping Head. The Tapping Head features a flexible silicone dip tube, allowing you to dispense beer whether the keg is standing upright or lying on its side. The dip tube will sink and draw liquid from the bottom, allowing you to orient the keg whichever way is more convenient in your refrigerator. Superior Quality and Durability KegLand's mini kegs are built to last, undergoing acid bath electrolysis to passivate the stainless steel, making them exceptionally resistant to rust. These are the only mini kegs on the market that are welded from the inside out using a specialized technique. This results in a superior, more sanitary welding finish compared to other mini kegs. When you choose a KegLand mini keg, you're investing in the highest quality available, surpassing the standards of other mini kegs of similar design. Low2 Lid O-Ring The sealing cap features an O-ring made of KegLand's special Low2 material which offers vastly improved oxygen barrier properties compared to silicone or EPDM, resulting in your beverage staying fresher for longer. Expand Your Setup with Accessories Enhance your mini keg experience with a range of available accessories, including neoprene jackets for insulation and compact tapping systems for easy dispensing. Stackable with the 5L and 8L Mini Keg. Specs: 10L / 2.6 Gal / 338 fl oz 19.2" High x 6.8" Diameter (488mm x 175mm) Max Working Pressure: 45 PSI / 3 Bar Made from 304 Stainless Steel KegLand Part Number: KL06385  

  Read more less

  $89.99

• 

  Torpedo Keg Beverage Tags | Keg Labels | Pack of 10

  Track your beverages stats right on the keg or fermenter. These reusable tags will adhere to any smooth surface and have a white board finish so you can write on them with dry erase markers. Great for keeping notes and following the development of your brew from grain to glass.  

  Read more less

  $5.99

• 

  Corny Keg Disconnect Faucet Adapter

  10 reviews

  This is the faucet adapter by itself. Use this faucet adapter to connect a draft faucet directly to a keg using a flare quick disconnect, KEG720 for ball lock or KEG760 for pin lock. Faucet, knob and quick disconnect are not included. Will not work with our creamer faucets, the vent-matics, flow control Intertap or flow control Perlick faucets (compatible with standard Intertap/Perlick faucets). Unit does come with faucet collar for mounting adapter to faucet. The faucet adapter is made from stainless steel. The outside collor is chrome plated brass.

  Read more less

  $8.79

• 

  CMBecker Pin Lock Quick Disconnect (QD) | Beverage Out | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA

  5 reviews

  The highest quality plastic ball lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Black plastic clearly identifies the disconnect as the liquid out QD Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany. Red and black quick disconnects are used for the liquid out tank plug. 1/4" male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

  Read more less

  $7.99

• 

  Flare Fitting - 1/4 in. MFL x 5/16 in. Barb

  3 reviews

  $3.99

• 

  Corny Keg Lid Foot

  5 reviews

  Replacment foot for cornelius style keg lid for homebrewing.  This fit on the end of the swing arm latch on the keg lid. They often crack with age and need to be replaced. 

  Read more less

  $1.49

• 

  KegLand Mini Keg | Stainless Pressurizable Beer Keg | 2L | 0.5 Gallon

  1 review

  Perfect for serving your craft creations on the go or making a compact home draft system that fits inside your refrigerator Welded from the inside out using a specialized technique for superior, more sanitary welds compared to similar mini kegs Interlocking chimes for easy and secure stacking of multiple mini kegs KegLand's Small Stainless Steel Mini Beer Kegs are ideal for homebrewing small batches and serving your craft creations directly from your home fridge. These compact kegs are designed for convenience and versatility. Flexible Dispensing and Carbonation You can naturally carbonate your beer using priming sugars or, for a more controlled approach, force carbonate and serve with the Ball Lock Tapping Head. The Tapping Head features a flexible silicone dip tube, allowing you to dispense beer whether the keg is standing upright or lying on its side. The dip tube will sink and draw liquid from the bottom, allowing you to orient the keg whichever way is more convenient in your refrigerator. Superior Quality and Durability KegLand's mini kegs are built to last, undergoing acid bath electrolysis to passivate the stainless steel, making them exceptionally resistant to rust. These are the only mini kegs on the market that are welded from the inside out using a specialized technique. This results in a superior, more sanitary welding finish compared to other mini kegs. When you choose a KegLand mini keg, you're investing in the highest quality available, surpassing the standards of other mini kegs of similar design. Low2 Lid O-Ring The sealing cap features an O-ring made of KegLand's special Low2 material which offers vastly improved oxygen barrier properties compared to silicone or EPDM, resulting in your beverage staying fresher for longer. Expand Your Setup with Accessories Enhance your mini keg experience with a range of available accessories, including neoprene jackets for insulation and compact tapping systems for easy dispensing. Stackable with the 4L Mini Keg. Specs: 2L / 0.52 Gal / 67 fl oz 7.6" High x 5.3" Diameter (195mm x 135mm) Max Working Pressure: 45 PSI / 3 Bar Made from 304 Stainless Steel KegLand Part Number: KL06347  

  Read more less

  $37.99

• 

  WilliamsWarn D-Style Sanke Keg Washer

  3 reviews

  The WilliamsWarn Keg Washer is a convenient option for cleaning and rinsing D-Style commercial Sanke kegs. No need to remove the spear from the keg—simply lock the keg washing into the keg as you would a tap coupler, then hook up water or cleaning solution to the 3/4" GHT inlet. Simple and effective.  

  Read more less

  $399.99

• 

  Micro Filling Systems 4 Head Counter Pressure Bottle Filler

  7 reviews

  Finally--a multi-head Counter Pressure filler at an affordable price point! The Micro Filling Systems 4 Head Counter Pressure Filler works similarly to any other counter pressure filling device out there, but with greater ease and at a fraction of the cost of a custom built manual system or the semi and fully automated systems. Designed with the single worker in mind, our system requires only the minimum amount of handling per bottle. Unlike most other manual models where all the bottles are loaded at once and then the filling unit is clamped down on them before the filling process can begin, the Micro Filling Systems 4 Head Counter Pressure Filler allows the worker to load from the bottom and fill each bottle individually and immediately. This allows some bottles to be filling while others are being loaded, thus reducing down time as the worker no longer has to wait for all the bottles to be filled before pulling them off the system to be capped. This workflow dramatically increases the number of bottles you can fill per hour! The height of the filling heads is easily adjusted by loosening a knob on either side of the unit and moving it up or down to fit a variety of bottle sizes and even growlers. Please note that growlers will require a larger diameter bung--please measure your growler's mouth diameter and find the appropriate bung here. Key Features 4 head manual counter pressure bottle filler with individual actuating stainless steel filler heads. 3 way stainless steel valves with purge, fill and off positions. Stainless steel pressure relief valves to fine tune filling rates. Easily removable stainless drip tray with barbed drain fitting for tube attachment. HDPE mounting points to allow unit to be clamped or bolted to any desired surface. Food grade liquid and gas lines with stainless fittings and tees. Attachable to any carbonated beer, gas and cleaning solution source using many standard fittings. Fully adjustable height control to allow filling of many different bottle sizes (or even growlers!). Units are easily disassembled for servicing or additional cleaning. 1/4" Barbed inlets for both gas and beverage supply. See the filler in action at Strange Land Brewing Company in Austin, TX!

  Read more less

  $2,099.99

• 

  Corny Keg Lid O-Ring | EPDM | Corny Keg Part

  Round EPDM O-rings for Cornelius keg lids.

  Read more less

  $3.29

• 

  Duotight Push-In Fitting | 6.35 mm (1/4") Female x 6.35 mm (1/4") Male Elbow

  The Duotight Elbow Piece is suitable for 6.35 mm (1/4") PE tubing or most lines with a 6.35 mm outer diameter. Designed for use with stiff PE tubing that is commonly used in water treatment equipment, water filters, reverse osmosis fittings, and other appliances that are directly connected to water lines. Duotight push in fittings have been engineered for maximised performance in both gas and liquid applications. No other push ins on the market have EPDM o-rings. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-ring made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18449    

  Read more less

  $1.69

Show more products