This English "session" ale is low in alcohol with a restrained bitterness and slight roast flavor
Includes Northern Brewer and Willamette hops
Estimated ABV: 3.4%
Estimated IBUs: 22-25
Makes 5 gallons of finished beer
An English-style "session" ale, low in bitterness, but big on flavor. Usually served on-draft in England, it is a beer with a slight roast flavor from the chocolate colored malt. Lower in alcohol than most ales, thereby allowing you and your guests to quaff several pints in a tasting "session". It is best consumed within 2-8 weeks in the bottle, but will age nicely over the course of 3 months.
Makes 5 Gallons
Estimated Original Gravity:1.032-35
SRM (Color Range): 15-16
IBUs: 22-25
Estimated Alcohol Percentage: 3.4%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Easily set and view different pressures downstream from a single CO2 regulator. Serve different beverages at different pressures without the need for expensive regulator manifolds! Built-in pressure gauge for easy reference when adjusting pressure settings Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application Compatible with both liquid and gas 8 mm Duotight inlet/outlet for use with 8 mm OD EVABarrier tubing or 8 mm Rigid Joiners The Duotight In-Line Regulator is an ideal solution if you want to serve different beers at different gas pressures. In a typical multiple line, multiple pressure system you would run a gas line from your main regulator into a secondary regulator where you would set different pressures. While that is ideal, it is a little pricey. This little sweetheart lets you set different pressures at a far lower cost. What we do is set the main regulator at the highest pressure we want in the system - for example a keg of soda that you want to carbonate and serve at 25 psi. Run the gas line into a manifold and then install one of these after the manifold on each line where you want to decrease the pressure, for example lowering to 10psi to serve your British pale ale and 14 psi to serve your summertime lawnmower lager. Works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718). Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. Stepping Down Pressure The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability. Ideal regulation scenario (10 PSI less than inlet pressure) Example of 30 PSI inlet translating to 0–20 PSI output Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-60 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Kegland Part number: KL15035
Clamps to buckets, carboys and other containers. Holds the Auto Siphon securely above the sediment while transferring. To use, simply snap on the Auto Siphon, slide down to the desired level, and then snap off when done. Use the 3/8 inch Auto Siphon Clip for Mini and Regular 3/8 inch Auto Siphons.
Extremely versatile and well fit for IPAs, Pale Ales, Hazys, Stouts, and Lagers
Aroma Profile: Citrus, Dank, Earthy, Woody
Alpha Acids: 15.0 – 18.0%
Cryo Hop® Hop Pellets
Higher AA and nearly twice the resin content of traditional T-90 hop pellets
Increase yield by reducing vegetal matter in your brewhouse and fermenter
Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer!
Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor. It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil.
Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material.
Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier.
Typical Hop Statistics:
Alpha Acids: 15.0 – 18.0%
Beta Acids: 4.5 – 6.0%
Total Oil: 2.0 – 4.0%
Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.
The Artisan Hops® Hop Shot is an easy way to boost IBUs without adding vegetal matter to your beer. This CO2 hop extract is a blend of Cluster and Magnum hops, which will impart a slight earthy, fruity character to your beer. 1 mL boiled in 5 gallons of 1.050 wort for 60 minutes will add approximately 10 IBUs.
Add to boiling wort only. We recommend softening the extract before use. Place the syringe in a warm glass of water at the beginning of your brew day, or create a slurry by adding the extract directly to a small amount of pre-boiled water.
Add to boiling wort only.
10 mL syringe
57% Cluster
43% Magnum
Earthy, Fruity
Store in the refrigerator between uses.
This stainless steel bulkhead is 1/2" FPT x 1/2" FPT with a flat, thick rubber washer that makes is very easy to install on most kettles. You will need to drill a 1" hole to install the bulkhead.
WLP067 is blend of White Labs' favorite New England-style IPA strains—great for producing beers with a hazy appearance and tropical, fruit-forward esters Produces dry, yet juicy beers with notes of mango and pineapple Ideal for high gravity ales, American and English hoppy beers, as well as malty ambers, porters, and brown ales PurePitch® Next Generation offers a precise cell count across all strains so you can calculate the exact pitch rate you need for every batch Scan the barcode on the back of the package and enter your wort stats into the Pitch Rate Calculator
White Labs Yeast has been producing high-quality brewer's yeast since 1995 and continues to raise the bar in the art of fermentation Don't need a full package? Put the lid back on and store in the refrigerator for your next batch! White Labs Coastal Haze is a blend of select New England-style IPA strains making this pitch a knock-out for producing beers with a hazy appearance and tropical, fruit-forward esters. Expect a dry, yet juicy beer, where the mango and pineapple characteristics will lend to added drinkability. **This strain has been genetically typed in White Labs' lab using polymerase chain reaction (PCR). Through this genetic testing, they have determined WLP067 Coastal Haze Ale Yeast Blend to contain the STA1 gene (glucoamylase), a potential indicator of Saccharomyces cerevisiae var. diastaticus. Brewers yeast are natural hybrids, which make it possible for certain strains to display elements of the STA1 gene. These strains have the ability to utilize some dextrins (unfermentable sugars), resulting in higher levels of attenuation than what is considered typical. PurePitch® Next Generation—now with more yeast, get a foolproof fermentation without a starter! Just twist the cap & pitch! Why PurePitch Next Gen versus other options? Typically yeast manufacturers use a range for how many yeast cells are going into each package. This can vary widely, especially from strain to strain. Next Gen offers a far more precise cell count across all strains allowing you to use the Whitelabs exclusive pitch calculator. Simply scan the barcode on the back of each package to be taken to their online calculator. Enter the volume, strength, and pitching temperature of the wort you are fermenting and the calculator tells you exactly how much yeast to pitch. You will be fermenting like a professional brewer, using the same concentration of yeast every time and enjoying more consistent results. Don't need a full package? Put the lid back on and store in the refrigerator for your next batch. Whitelabs has also increased the viability (the number of living cells in the package) over the shelf life of the yeast. Next Gen strains are grown in their unique, small-batch reactors to assure freshness and then packaged in a special film that allows for off-gassing, assuring that their viability is absolutely industry leading. Attenuation: 75-82% Flocculation: Low to Medium Alcohol Tolerance: 8-12% ABV Optimum Fermentation Temp: 68-72°F Cell Count: 150 Billion For best results we always recommend ordering an ice pack with your liquid yeast. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
This arm extension allows you to continue using the BrewZilla's recirculation arm after adding a boiler extension kit. Compatible with both 35L and 65L models.
Compatible with Gen 3 / Gen 4 BrewZillas.
KegLand Part Number: KL26413
This stainless steel strainer is 10.25" in diameter, and features a double mesh basket with a wooden handle. Great for straining hops, wort, and adjuncts during the brewing process.
Derived from T-90 Nectaron® pellet hops to perfectly replicate the aroma profile while omitting undesirable compounds found in hop vegetal matter
Flavor/Aroma: Tropical, Dank, Citrus
The perfect hop: Using 100% hop-derived terpenes, Abstrax builds exact profiles to match the flavor and aroma of an exemplary lot of Nectaron® hops
Consistent results every time. Eliminates the variance of using hops that may differ by age, crop year, storage conditions, growing region, processing method or farm
Replace pellet hops: 5mL is equal to roughly 5.5 oz of pellet hops, while 1 oz of Quantum is equal to 2 lbs of pellet hops
Nectaron® Quantum Brite
This New Zealand triploid aroma hop delivers the remarkably complex tropical flavors you’re craving. With subtle base notes of dank, Nectaron® gives new depth to juicy passionfruit, pineapple, and grapefruit.
Optimized Hop Extracts
Compared to other hop-extracts, the Quantum Series tastes better, performs better, and is easier to use. It works with everything from Pils to Porters with no special handling required. Easily flowable at cool, ambient, and warm temperatures. Gone are the days of warming up your extract or scrubbing the sticky gunk out of your equipment.
Compared to hops and pellets, the Quantum Series offers a 100% utilization rate and can be used at any stage of the brewing process. It cuts down on shipping and storage costs by an order of magnitude, not to mention the labor savings from not having to lug boxes around.
Quantum Tastes Better
The Quantum Series is an evolutionary leap forward in aroma and brewing technology. When you get down to it, nobody wants to use an extract product that makes their beer taste worse off. Extracts have taken a bad rap because they can often add more problems than they solve and, frankly, they don’t always taste the greatest. Abstrax gets it. That’s why, above all else, flavor and aroma come first with Quantum.
Dosage
Consider 1mL of Quantum Brite the flavor/aroma equivalent of 1 oz of T-90 pellet hops. Add after fermentation is complete, ideally at the coldest and latest point in your process, in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass.
Features:
100% efficient flavor/aroma transfer
Consistent from batch to batch
No yield loss from absorption
Quantum will not affect IBU test results and cannot cause lightstruck off-flavors
Zero Undesirable Plant Compounds
No Lipids
No Chlorophyll
Recommended storage: 40-90°F. Do not freeze.
Nectaron® is a registered trademark owned by owned by New Zealand Hops.
Craft Meister Growler Cleaning Tablets are the easiest and most effective way to keep all of your glass, stainless and plastic growlers clean and beer ready. Just fill the growler with warm water, add a Tablet, soak for 10-15 minutes, then dump and rinse. The Tablets rinse away easily with no fragrances, dyes or residues left behind. Also works great on drinking water bottles, Erlenmeyer flasks, and coffee mugs and pots.
Directions:
Fill Growler with warm water.
Add 1 tablet and let dissolve.
Soak for at least 10 minutes.
Empty growler and rinse thoroughly.
Repeat if necessary, sanitize if required.
For heavy soils: Use 2 tablets. Let soak overnight up to 24 hours. Increase water temperature.
Ever wanted to punch out a few more gallons of wort with your 65L BrewZilla? Maybe you wanted more strike water for a super sticky batch. Maybe you get boil overs a lot and would like a bit of extra protection. Now there's a solution! The all new 65L BrewZilla Boiler Extension adds 6.3 gallons of headroom. Turn that 17G BrewZilla or DigiMash system into a 23G behemoth! The extension kit is also great for distilling! Extend the height of your pot still by attaching one or more boiler extensions. For distillation, we recommend upgrading to the Adjustable Lid Clamps which allow you to dial in the tension for a better seal. If you're struggling to get an airtight seal when using the Distillation Lid or Steam Condenser Set, these clamps can help provide more tension. Compatible with Gen 3 / Gen 4 BrewZillas. You Might Also Need: 65L Extended Malt Pipe 65L Wire Support Ring Recirculation Arm Extension KegLand Part Number: KL22248
Lallzyme EX – Enzyme for Enhanced Color and Juice Release in Early-Drinking Red Wines
Improves color extraction while preserving soft, approachable tannins
Increases free-run and press juice yield by breaking down cell wall pectins
Enhances clarification and reduces solids for easier pressing and settling
Supports smooth mouthfeel in red wines intended for early consumption
Balanced enzyme activity preserves varietal fruit while aiding extraction efficiency
Lallzyme EX is a gentle maceration enzyme developed by Lallemand for red wine fermentations where balance, early drinkability, and clean extraction are key. Its primary function is to degrade grape skin cell walls through pectinase and hemicellulase activity, improving juice yield and the release of color compounds without promoting aggressive tannin extraction. This makes it particularly well-suited for light- to medium-bodied red wines or warm-climate varietals where managing tannin levels is critical. EX helps clarify must, improve press efficiency, and support the production of soft, fruit-driven wines that are ready for market sooner.
Comparison to Other Lallemand Maceration Enzymes:
Compared to EX-V, which targets tannin structure and aging potential, EX is better for fresh, youthful styles that prioritize fruit expression and roundness. In summary:
EX = best for early-release reds, softer tannins, moderate color
EX-V = ideal for structure and age-worthines
Protocol
Dilute Lallzyme EX in 10 times its weight of chlorine-free water. Add to crushed grapes or must at the start of fermentation. Mix well to ensure even distribution. Best activity between 20–30°C. Avoid use below 10°C or after fermentation is complete.
Usage Rates
Recommended dosage: 20–30 grams per ton of grapes
= 0.44–0.66 grams per hectoliter (assuming 450 L/ton)
= 0.0044–0.0066 grams per liter
= 0.017–0.025 grams per gallon
Use the lower range for softer grapes or longer macerations. Use higher rates when working with firmer-skinned varieties or short fermentations where improved extraction and juice yield are needed.
So handy you’ll swear this is the food-grade WD of your brewhouse!
FDA & NSF approved food grade lubricant. Great for lubricating keg parts, especially poppet valves, relief valves, and lid o-rings. Many home brewers find it helpful in sealing those rings and gaskets that have tiny leaks. Great anti-rust film for equipment which is stored outdoors. With so many uses around your brewhouse, you’ll find yourself reaching for your bottle of Silicone Spray often!
The most affordable ball lock quick disconnect we offer!
Black color easily identifies the QD for beverage use
1/4" barb connection
This black, beverage out quick disconnect comes with a barb for attaching to a beverage line, and its high quality construction creates a sturdy seal that won’t leak gas or beer when in use.
The barb measures 1/4 inch, so 3/16 inch beverage tubing is recommend for the perfect fit.
Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.
Kegland Part Number: KL02950
This stainless 4" tri-clover ball lock lid is a direct replacement to the lid that comes on our kegmenters.
Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty Kegmenter, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the keg.
Oak Chips are a fast and economical way to add oak barrel flavor to any beer.
Oak Chips are made from seasoned American and French Oak staves which are chipped down and convection-toasted to create flavors similar to what a comparably toasted barrel would impart. The available toast levels are Medium, Medium +, and Heavy.
It's important to understand that each toasting level creates different flavors in the oak; not a greater intensity of impact in your beer. Don't think of them as weak, normal & strong; they're each a different flavor profile.
Heavy Toast French Oak chips will impart strong flavors of Clove, Spice, Smoke & Butterscotch; along with a small amount of Vanilla & Coconut flavor.
Because of the high surface area, oak chips can extract quickly and care should be taken not to overdo it. Taste your beer frequently after the first week of contact and be ready to rack off the oak chips.
Suggested Dosage is 1-2 oz per 5 gallons.
ICV-D21 is the ideal choice for winemakers seeking to craft structured, full-bodied wines with bold aromatics and enhanced mouthfeel Whether perfecting a Cabernet Sauvignon, enhancing the richness of Syrah, or adding depth to Chardonnay, ICV-D21 consistently delivers complexity, elegance, and age-worthiness in every bottle Enhanced mouthfeel and rich aromatics for structured red and white wines ICV-D21 is a robust wine yeast strain specially developed by the Institut Coopératif du Vin (ICV) for crafting full-bodied red and white wines with enhanced mouthfeel and complex aromatics. Known for its ability to optimize tannin extraction and promote rich color stability, ICV-D21 is ideal for producing age-worthy wines with layered depth and intense fruit expression. Its consistent fermentation kinetics ensure reliable attenuation and balanced structure in high-Brix musts. Enhanced Mouthfeel: Promotes a smooth, velvety texture with well-structured tannins. Aromatic Complexity: Boosts expressions of dark berries, plum, and subtle floral notes. Alcohol Tolerance: Effective up to 16% ABV, allowing for rich, full-bodied wine production. Temperature Range: Performs optimally between 64°F (18°C) and 86°F (30°C), providing flexibility for various winemaking styles. Medium Flocculation: Contributes to clarity and stability post-fermentation. Low SO₂ Production: Preserves aromatic purity and minimizes off-flavors. Applications: Cabernet Sauvignon: Enhances bold fruit expression and promotes structured tannins. Merlot: Boosts plum and cherry notes while improving mouthfeel. Syrah: Elevates dark fruit and peppery spice with deep color extraction. Grenache: Enhances ripe red fruit flavors with a smooth finish. Chardonnay: Promotes complexity and rounded mouthfeel with subtle floral accents. Flavor Profile: Dark Fruits: Highlights blackberry, plum, and cherry with concentrated richness. Spice and Floral Notes: Accentuates hints of violet, licorice, and black pepper. Structured Tannins: Integrates smooth tannins for enhanced mouthfeel and aging potential. Aging Potential: Supports long-term aging, improving depth and complexity over time. Usage: Rehydration: Rehydrate in 10 times its weight of chlorine-free water at 95°F (35°C) for 15–20 minutes. Stir gently to prevent clumping. Pitch Rate: Use 1–1.5 grams per gallon (0.25–0.4 grams per liter) for optimal fermentation and flavor development. Nutrient Addition: Supplement with yeast nutrients, particularly in low-nitrogen musts, to ensure complete fermentation. Fermentation Temperature: Maintain between 64°F and 86°F for optimal tannin extraction and aromatic development. Extended Maceration: Ideal for long maceration periods to intensify structure and deepen flavor complexity. Download the PDF Download the PDF
PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.
Distillation takes just two hours and produces enough alcohol each time to make a 1 liter bottle at 56-60% ABV. No compromise on quality. Revolutionary non-technical design. No hoses, no complicated assembly, just plug and play! As simple to operate as the kitchen kettle. Great value for money. Safe and easy to use which is ideal for the pilot distiller. Can be used for alcohol distillation or water distillation - produces 100% pure, safe drinking water.
Unit holds 1 gallon of liquid.
Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsiblity to research their local, state, and federal laws and abide by those laws. MoreBeer! is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).
Inspired by Founders Breakfast Stout®, this clone recipe combines dark malts, cacao nibs, and two additions of coffee grounds to make a stunningly complex brew
Includes Nugget and Willamette hops
Estimated ABV: 7.5%
Estimated IBUs: 60
Makes 5 gallons of finished beer
There’s no mistaking that distinct aroma. A quick whiff and suddenly you’re overwhelmed with a sense of warmth and well-being. You perk up a bit in anticipation of that first sip of the day. Truly there’s nothing quite as satisfying as a dark, full-bodied, grande-sized mug of… stout!?
Put All Out Brunch Stout next to a glass of cold brew and you might have a hard time telling which is which. Within this jet-black libation lies an unfathomable depth of flavor. Inspired by Founders Breakfast Stout®, this clone recipe combines dark malts, cacao nibs, and two additions of coffee grounds to make a stunningly complex brew. Flavors of sweet chocolate, bitter coffee, and a roasted aroma will have you floating toward the kitchen table with cartoonish anticipation. When you snap out of it, put down the spoon, take off the bib, and pour yourself a satisfying glass of All Out Brunch Stout.
Please note: this recipe calls for 2 oz of Kona and Sumatra coffee grounds, which are not included in the kit.
Makes 5 gallons
Estimated Original Gravity: 1.078
SRM (Color Range): 40+
IBUs: 60
Estimated Alcohol Percentage: 7.5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Vodka Distillery Yeast is a high yield Vodka Strain with extraordinarily low metabolite production; ideal for use with sugar, grain or potato feedstock in Vodka or other white spirit production. Provides complete nutrition for easy fermentation of low-nutrition ashes together with myloglucosidase enzyme or dextrins conversion. Sufficient for 6.6 gallon fermentation.
Statistics:
Ideal Water Start Temp: 86° F
Ferment Temp Range: 63 - 73° F (17 - 23° C)
Reduless is a new product from Lallemand that was designed to correct negative VSCs (Voltatile Sulfur Compounds) such as H2S (hydrogen sulfide, A.K.A. "rotten egg") and DMS (dimethyl sulfide, A.K.A. "cooked corn") defects in wine. Made from inactivated yeast that have been infused with copper using a proprietary process, Reduless is a much gentler H2S remedy on the wine than the traditional copper sulfate (CuSO4) treatment alone. If you have an H2S problem, then we recommend treating it with Reduless first. However, if the sulfur problem still remains after the Reduless treatment, then a bench trial with copper sulfate (CuSO4) is recommended.
Note: The sooner you catch a sulfur problem the easier it is to deal with!
To Use:
Dissolve Reduless in 10 times it's weight in water and add immediately to the wine. Stir the wine gently to ensure a thorough homogenization. Rack or filter after 72 hours.
Recommended Dosage:
0.4-0.6 g/gal. The maximum amount of copper that can be released into the wine using Reduless at the recommended dosage is 0.02 ppm.
A simple, reliable way to test the pH of your beer, no meter required!
Quickly test the pH of your mash with confidence using our colorpHast pH strips. These strips are high-quality and made not to run, so you are assured an accurate reading each time. Comes in packs of 100 strips.
Centered around the incredibly fruity BRU-1™ hops, a varietal that is absolutely bursting with the sweet, fruity aroma of pineapple
Includes 100% BRU-1™ hops from boil, to whirlpool, to dry hopping
Estimated ABV: 6.4%
Estimated IBUs: 34
Makes 5 gallons of finished beer
A relaxing vacation is only a pint glass away when you have this Tropical IPA on hand. After the SMaSH-ing success of our Mai Tai PA clone kit, Flamingos & Fronds, we decided to keep the island vibes going with a similar recipe featuring a new hop. Pineapples & Palms is centered around the incredibly fruity BRU-1™ hops, a varietal that is absolutely bursting with the sweet, fruity aroma of pineapple. Used for bittering, aroma, and dry hopping, BRU-1™ is an ideal choice for single hop beers. With no specialty malts in the mix, your taste buds will cut right to the headliner hop. In addition to the unmistakable pineapple character, you'll pick up notes of pear, apple, and a hint of fresh cut grass. You've earned a break from life's unrelenting hustle and bustle, if only for as long as there's beer left in your glass.
Makes 5 gallons
Estimated Original Gravity: 1.058-63
SRM (Color Range): 4-5
IBUs: 34
Estimated Alcohol Percentage: 6.4%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
BRU-1™ is a registered trademark owned by Yakima Chief Hops, LLC.
The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The most affordable all-in-one automated all-grain brewing system! Mash grains and boil wort in a single vessel DigiBoil electric kettle automatically maintains mash temperatures with the digital controller Dual heating elements combine for 1500W of power Also available with optional Recirculation Pump Kit! The DigiMash system represents the best value in electric all-grain brewing you'll find. With a 9-gallon DigiBoil electric kettle and the DigiMash stainless steel mashing accessory pack included, this is by far the most affordable way to get into electric all-grain brewing. It may not have all the bells and whistles of the BrewZilla, but it does have everything you need to mash and boil all in one unit. Setting up and using the DigiMash couldn't be easier. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperature on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil. If you're deciding between the DigiMash and the BrewZilla, there are a couple of key differences worth noting. One of our favorite features of the BrewZilla is the programmable mash steps and delayed start, which the DigiMash does not have. You can still step mash by simply raising the temperature manually on the controller, but the automatic steps are a convenient feature if you want to set it and forget it. The other major difference between the two systems is that the BrewZilla features a built-in pump for recirculating the mash. Recirculation is a great way to improve mash efficiency, but it is far from required for a successful brew day. Using an external pump with the DigiMash is also an option, and one can be integrated for mash recirculation quite easily. Simply connect the ball valve to the inlet of your pump, and then connect the outlet of the pump to our Sparge Arm Assembly. This model comes with the 35L DigiBoil, which has two built-in heating elements that run off a 110V plug. One element is 1000w and the other is 500w for a combined 1500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from mash temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s). Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach fittings with 1/2" FPT, such as our female threaded quick disconnect. DigiBoil Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 110V / 15A power and plug (5 ft. cord) Dual heating element control (1000w and 500w) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Stainless lid Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Recommended max. grain bill - 18 lbs Recommended min. grain bill - 8 lbs External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W ETL Listed DigiMash Stainless Steel Accessory Pack Includes: False bottom Malt pipe Wire support Malt pipe handle Malt pipe bottom screen
Lallzyme EX-V – Enzyme for Structured Red Wines with Enhanced Color and Tannin Stability
Extracts color and tannins with improved integration for wines destined for aging
Promotes stable anthocyanin-tannin bonding for long-lasting color
Enhances mouthfeel, midpalate weight, and structural balance
Improves juice yield and reduces solids through efficient cell wall degradation
Balanced enzyme activity supports both extraction and finesse in premium red wines
Lallzyme EX-V is a precision enzyme blend developed by Lallemand for red wine fermentations where structure, balance, and ageability are desired. It combines strong pectolytic activity with targeted cellulase and hemicellulase functions to break down grape skin cell walls, facilitating the release of anthocyanins and seed-derived tannins in a controlled, integrative manner. EX-V is ideal for varietals with moderate to firm skins or when crafting red wines intended for barrel aging, as it enhances phenolic complexity without over-extracting bitterness or astringency. Wines fermented with EX-V tend to show refined texture, vivid color, and excellent long-term stability.
Comparison to Other Lallemand Maceration Enzymes:
Compared to EX, which is best for early-drinking, fruit-forward reds, EX-V is designed for more structured, age-worthy styles with higher tannin and color stability.
EX = softer, fruit-driven reds for early release
EX-V = structured, balanced reds with aging potential
Protocol
Dilute Lallzyme EX-V in 10 times its weight of chlorine-free water. Add to crushed grapes or must at the beginning of fermentation. Mix thoroughly for even dispersion. Optimal temperature range: 20–30°C. Avoid adding below 10°C or after alcoholic fermentation begins.
Usage Rates
Recommended dosage: 30–40 grams per ton of grapes
= 0.66–0.88 grams per hectoliter (assuming 450 L/ton)
= 0.0066–0.0088 grams per liter
= 0.025–0.033 grams per gallon
Use the lower end of the range for moderately structured fruit or extended maceration. Use the higher range for tighter-skinned grapes, shorter fermentations, or when greater phenolic extraction and color stability are required for barrel-aged or long-lived reds.
Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends!
Enjoy the citrus/orange hop character Amarillo® hops impart on to this thirst-quenching Pale Ale
Includes 100% Amarillo® hops
Estimated ABV: 5.3%
Estimated IBUs: 50-55
Makes 5 gallons of finished beer
Phil created this recipe in an effort to stop his long, slow spiral into fruity, phenolic, sour beers that began to populate his fermenters and kegs back in 1998. Honestly, Phil seriously contemplated throwing gummy bears into his brew and realized it was time to step back, look around, sober up, and grab a classic West Coast pale ale.
This beer is dominated by the wonderful Amarillo® hop that is known for having a citrus/orange flavor. The Left Coast Pale has been brewed many times over as a house favorite during the Fermentation Frenzy shop era (Los Altos, CA circa 1997-2007). Try it, you'll like it. And, unfortunately, so will your friends.
Phil recommends for an even more pronounced hop nose and flavor you add an additional 1oz of Amarillo® hops to the fermenter as a dry hop addition (not included with kit).
Makes 5 gallons
Estimated Original Gravity: 1.050-55
SRM (Color Range): 12
IBUs: 50-55
Estimated Alcohol Percentage: 5.0-5.5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Amarillo® is a trademark owned by Virgil Gamache Farms, Inc.
25 Feet of 3/8" Copper
Coils Raised Up To Where The Heat Is
Integrated Turbulator
Cools Faster and Uses 40% Less Water
25 Feet of 3/8" Copper
Includes Tubing and Standard Garden House / Utility Sink Thread
Manufactured in the USA
Save water during the cooling process with our Super Efficient Immersion Wort Chiller. During the manufacturing process we build in an inner water turbulator that causes the cold water to spin through the coil. This reduces the laminar flow found in a standard wort chiller where only the outer water is cooled as it travels through the coil. The result is a 40% reduction in water, and faster cooling, when compared with our standard chillers. But that is when we compare it to OUR standard chillers with the coils at the top. When you compare to other chillers on the market the results are even better.
ALL of our chillers feature coils that raised up to where the heat is. As we learned in school heat rises so when other wort chillers have all the coils on the bottom they actually never cool unless you stir your wort. The problem with stirring is that you mix up all your trub/sediment and you risk airborne contamination... neither of which is good. Our chillers cool fast and allow you to keep your lid on your kettle during the critical cooling period.
Constructed from 25' of 3/8'' copper tubing. 8' of vinyl tubing attached to both the in and the out with a female garden hose fitting on the in side. Use our CE21S hose thread adaptor to attach to your sink. Perfect for a kitchen environment where the sink is close by.
This size chiller is ideal for our 8 Gallon Heavy Duty Kettles!
The measurements are: Approx. 10" diameter, 8" to the top coil, 15" to the bend to go over the lip of the kettle.
Natural cork is the preferred traditional cork of professional winemakers
Grade 4 (rated 0-10) is our most economical whole natural cork offering
Solid seal for a steal
24mm X 44mm, #9 x 1.75" | Fits standard cork finish (neck) bottles
Recommended aging time: Up to 5 years
Molinas Cork has been sustainabily harvesting from the cork forests of Sardinia for over 100 years
Bark is aged an additional year prior to harvest, leading to less porous, higher quality cork
Natural cork is the traditional and preferred cork of professional winemakers across the globe. Natural grade 4 corks provide a solid whole natural cork at a spectacular price. These grade 4 corks (rated from 0-10, 0 being best) are fairly porous and are not recommended for extensive aging (less than 5 years). 24mm X 44mm, #9 x 1.75". Fits standard cork finish (neck) bottles.
Italy produces more wine than any country in the world and Molinas is the largest Italian cork supplier with over 1 billion corks produced annually. Molinas Cork was started over 100 years ago by Pietro Molinas on the Italian island of Sardinia. Besides its beautiful beaches and designation as one of the world's five Blue Zones, Sardinia is known for its large, government protected Cork tree forests.
Today, the 4th generation of the Molinas family sustainably harvests cork from these protected trees. Compared to most cork available in the market, the bark is allowed to mature an additional year. This leads to a less porous, higher quality cork, and has less impact on the forest. Throughout the entire process from tree to finished cork, quality control is strictly monitored. MoreFlavor! is proud to represent Molinas Cork in the USA.
Tolerances on Normal Dimensions:
Height: +/- 0,4 mm
Diameter: +/- 0,3 mm
Humidity: Min: 3% Max: 8%
Ovalization: ≤ 0,5 mm
Characteristics Physical / Mechanical / Sensory:
Peroxides: < 0,2 mg/stopper
Dust transfer: < 1,5 mg/stopper
Extraction force: 30 +/- 10 (daN)
Organoleptic test: < 2%
Finishing Treatments:
Genesis Steam Treatment to Reduce Cat and Other Volatile Substances.
Washing: with h2o2 solution in white or diluted with peracetic acid for natural color.
Drying: Hot Air Forced To Eliminate Peroxide Residues.
Thermal or ink marking on specific request.
Silicone lubricant and adhesives with food certification for food contact.
Hydrometer for testing alcohol levels in distilled spirits. Will only work in solutions of ethanol and water, will not read the alcohol levels of beer or wine.
Reads alcohol percentage on scale of 0-100%, and "Tralle's scale" (Proof) on a scale of 0-200.
Specs:
Range: 0-200 / 0-100
Unit: Proof/Tralles
Div.: 1
Accuracy: ± 2
Calibration temp.: 60°F
Length: 11.4" (290mm)
This ale will deliver a smooth blend of Cascade floral character and biterness, tempered by a slight sweetness from the honey
Includes 100% Cascade hops
Estimated ABV: 6%
Estimated IBUs: 40
Makes 5 gallons of finished beer
In 2011, the White House home brewed beer for the first time in, well, perhaps centuries! We were super were excited when a MoreBeer! customer first submitted his freedom of information act request for the White House homebrew recipes. We were a little surprised, and we'll say it - let down - when we saw the actual recipes. One MoreBeer! staffer blurted out "Whoa...this seems like beer that Prince Harry should be brewing." English malt extract, English hops, and even an English yeast strain were used; so the only thing truly American was the honey! It seems that we were not the only beer lovers to pick up on this. So while we really, really love English beers as much as the next homebrewer, we think the Commander In Chief of America and his White House Brewmasters should be using fresh ingredients from well...America.
Since we were tweaking the recipe towards this side of the pond, we decided we could also help educate the White House staff on their yeast selection. Yes dry yeast has gotten better but since its for the White House and all, we think they can spring for liquid yeast...and is there any better choice for this recipe than Wyeast 1056 AMERICAN Ale or White Labs 001 California Ale?? Not really. In fact, just queue up the star spangled banner, turn on the football game, and throw some hot dogs on the grill because we are starting to feel pretty patriotic here.
So while we send this kit along with our friendly suggestions back to the White House, YOU can make the exact same beer at home. That way if you are in a diner somewhere on the campaign trail and the president pulls up you can whip out a bottle of the 'Honey Pale the White House Should Be Making' or the 'Honey Porter the White House Should Be Making' and enlighten the Top Dog, homebrewer style.
This American Honey Pale Ale uses all American ingredients, including:
White Wheat, Crystal 15L, and 2-Row grown in the USA
Cascade hops
California Wildflower Honey
Truly a classic American Pale Ale recipe! This ale will deliver a smooth blend of Cascade floral character and biterness, tempered by a slight sweetness from the honey. The California Wildflower Honey delivers just enough residual sweetness to result in an amazingly balanced, hoppily delicious pale ale.
Makes 5 gallons
Estimated Original Gravity: 1.054-59
SRM (Color Range): 8
IBUs: 40
Estimated Alcohol Percentage: 6%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
The Ultimate BrewZilla Combo Pack! Get the Gen 4 BrewZilla & our most highly recommended accessories at an unbeatable price!
Includes all of our favorite accessories for the BrewZilla including the Neoprene Jacket to speed up heating times, Hop Spider to keep vegetal matter out of your wort, and Chilling Connection Kit so you're ready to use the Immersion Chiller out of the box
We think all BrewZilla brewers will eventually upgrade their systems with these accessories, so buy them together and reap the savings!
Also available in 220V (AG583)
Combo Pack Includes:
BrewZilla Brewing System | Gen 4 | 9.25G | 110V
Neoprene Jacket
Hop Spider
Wort Chiller Connection Kit
Gen 4 BrewZilla All-in-One Brewing System
WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal
The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench
Mirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter
Make larger batches or higher gravity beers! BrewZilla offers the largest malt pipe capacity for units in its size range, and the Gen 4 unit has a 30% larger malt pipe compared to the previous generation
Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency
Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp
The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve
Pair with the RAPT-enabled Bluetooth Thermometer, allowing your BrewZilla to calculate a core mash temperature reading and more accurately control temperatures and mash steps
More RAPT-enabled accessories are coming, and future firmware updates can be downloaded to the RAPT Controller itself over the internet
WiFi/Bluetooth Enabled RAPT Controller
The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen.
But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability.
And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer!
But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings.
Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road.
High Capacity Malt Pipe
With an approximately 23.5 lb capacity, the BrewZilla can mash nearly 50% more grain than similar sized models of the Anvil Foundry and Grainfather G30. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency.
Concave Base with Center Draining
Leave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind.
Ultra Low Watt Density Elements
The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy.
Easy Access Built-In Pump
The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet.
If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer.
MoreBeer!'s Final Word
We’ve been selling all-in-one brewing systems ever since they first hit the market, and we have to say that the Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included.
Perfect for Distillation
If you want to expand your lineup of homemade libations to offer Spirits in addition to Ales & Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find.
Features:
Gen 4.1
Stainless steel construction
9 gallon total capacity with a finished beer output of 5-6 gallons
WiFi/Bluetooth Enabled RAPT digital temperature controller
Automatic step mashing with 6 programmable stages
110-120V power and plug
12.5A
Requires 20A circuit
Dual heating elements (1000 watts and 500 watts)
Stainless steel 1/2" ball valve for gravity draining or transferring via pump
Immersion wort chiller included
Stainless steel malt pipe/basket
Stamped in volume markers
Glass lid
Adjustable lid clamps (do not use with glass lid in place - see below)
Magnetic drive pump for recirculation, transfers, and cleaning
Recirculation arm
PPSU sight glass
Bottom handle for easy lifting and pouring
Rubber feet
Temperature reads in °F or °C
Approximately 32.75" H (with recirculation arm) x 12.5" D
Recommended max. grain bill: 23.5 lbs
AlcoEngine Still ready with the purchase of a Distillation Lid
Pump Specs:
Max Capacity: 2.9–3.1 gal/min
Max Head: 4.9–6.8 ft.
Poles: 2
Voltage: 110–120V-AC
Frequency: 50–60Hz
Power: 6 watts
Current: 60 mA
Speed: 2600–3000rpm
Duty Cycle: Continuous
Capacitor: 2µF
Input/Output: 13mm barb
Water Resistance: IPX2
Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos.
Please Note: When removing the malt pipe to drain after mashing, it is important to do so slowly rather than in one swift pull. If the malt pipe is removed all at once when it is full of wort, it is possible for the draining wort to spray out and over the rim of the brewery through the perforated bottom. Remove the malt pipe slowly so that some of the wort can drain out before it is fully removed and set on its bottom feet. This can be done by hand on the 35L unit, but for the 65L and 100L units we highly recommend using the Pulley System for removing the malt pipe.
Warning: Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. With too much tension, it is possible for the lid clamps to break the glass lid when engaged.
Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use.
35L (110V)
35L (220V)
65L (220V)
100L (220V)
10 ft.
14 Gauge
14 Gauge
12 Gauge
10 Gauge
25 ft.
14 Gauge
14 Gauge
12 Gauge
10 Gauge
50 ft.
12 Gauge
12 Gauge
10 Gauge
8 Gauge
The ported plastic carboys are pretty cool in that you can eliminate having to rack out of them. However, you need this tool to attach the nut onto a plastic ported carboy from the inside.
The wrench has a specially molded hex nut to hold the 5/16 inch barbed (FE347) or 1/2 inch barbed (FE347A) spigot nut, and a long handle so you can reach to the bottom of the carboy. The spigot wrench can be reused, you only need it during the installation and/or removal of the spigots.
A Dry Stout in the style of Guinness with flaked barley for a wonderfully creamy head
Includes a single addition of Magnum hops
Estimated ABV: 6%
Estimated IBUs: 41-45
Makes 5 gallons of finished beer
Here it is: a Dry Stout in the style of Guinness. Flaked Barley helps to provide all the protein that is needed to produce that wonderfully creamy head. 43 IBU of bitterness compliments the dryness of the Roasted Barley to produce authentic Irish Dry Stout.
Makes 5 gallons
Estimated Original Gravity: 1.060-64
SRM (Color Range): 35
IBUs: 41-45
Estimated Alcohol Percentage: 6%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. The recommended yeast(s) can be found below. All grains will come milled.
Please Note: In order to better serve our customers, we are now offering our extract recipe kits with either Liquid Malt Extract (LME) or Dried Malt Extract (DME). The majority of our DME kits were converted from the LME version, which is why you may notice slight variances in the extract names and quantities on your recipe sheet. You may also find that your Specific Gravity and ABV% are slightly higher if you choose DME. Whether LME or DME, add all extracts provided according to the recipe sheet. For further details, please reference the conversion chart below.
MoreBeer! Extract Recipe Kit Conversion Chart
Liquid Malt Extract
Dry Malt Extract
4 lbs
3.5 lbs
5 lbs
4 lbs
6 lbs
5 lbs
7 lbs
6 lbs
8 lbs
6.5 lbs
9 lbs
7 lbs
Ultralight Malt Extract
Golden Light DME
Pale Malt Extract
Golden Light DME
Pilsner Malt Extract
Pilsen Light DME
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Epidemic Ales
Crisp and refreshing traditional pale lager. A light-colored, low-alcohol refresher
Won the Gold Medal in the American Lager category at the 2020 Great American Beer Fest
Includes Northern Brewer and Saaz hops
Estimated ABV: 4.5%
Estimated IBUs: 9
Makes 5 gallons of finished beer
A traditional pale lager so crisp and refreshing that it deserves a moment to be enjoyed even if the world around you is ending. A perfect introduction to craft beer for the uninitiated, and a welcome change of pace for the craft beer guru that wants a break from hoppiness. Lager at World's End from Epidemic Ale uses a clean malt bill of Pilsner and Vienna malts and Flaked Corn for a light-colored, low-alcohol refresher.
Epidemic Ales opened in Concord, CA at the beginning of 2016 and have been brewing quality libations that leave a lasting impression ever since. In 2020, Lager at World's End earned them a Gold Medal in the American Lager category at the Great American Beer Fest (GABF) beer competition. That award-winning recipe featured our own Viking Pilsner Malt. We're stoked that we continue to receive excellent feedback from our Pro customers who are making incredible lagers *and* ales using Viking Pilsner as a base due to its exceptionally clean character.
Makes 5 gallons
Estimated Original Gravity: 1.042-47
SRM (Color Range): 3-4
IBUs: 9
Estimated Alcohol Percentage: 4.5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
CIP (clean in place) is a commonly used technique to clean large craft brewing vessels. At Ss, we've taken the same principles used in our pro fermenters and scaled the design down for homebrewers to speed up their cleaning process and improve their sanitation practices, just like craft breweries.
304 Stainless steel construction
3" TC
1/2" MPT fitting
Recommended to use with the 1/2" Hose Barb
2 bar / 29 psi / 7 gpm flowrate recommended
Does not include TC clamp or gasket
Pro version has a larger spray ball designed for larger pumps (17 GPM) and vessels 1BBL and larger.
WLP09 can ferment up to 25% alcohol when fed sugar over the course of the fermentation Ester character increases with gravity. Malt character dominates at lower gravities PurePitch® Next Generation offers a precise cell count across all strains so you can calculate the exact pitch rate you need for every batch Scan the barcode on the back of the package and enter your wort stats into the Pitch Rate Calculator
White Labs Yeast has been producing high-quality brewer's yeast since 1995 and continues to raise the bar in the art of fermentation Don't need a full package? Put the lid back on and store in the refrigerator for your next batch! From England, this yeast can ferment up to 25% alcohol when used correctly. Produces ester character that increases with increasing gravity. Malt character dominates at lower gravities. After using this yeast strain we found out that it can sometimes produce a Belgian Character and sometimes not. Try this yeast with your big Belgians as well as other unique hybrids and you will find yourself pleasantly surprised. We would not recommend it for creating classic true-to-style variations of Barleywines, Imperial Stouts, Strong Ales or any other high-gravity style where Belgian flavors would not be appropriate. This yeast might be a great fit for really big Dunkelweizens. To achieve >25% ABV, sugar needs to be fed over the course of the fermentation. PurePitch® Next Generation—now with more yeast, get a foolproof fermentation without a starter! Just twist the cap & pitch! Why PurePitch Next Gen versus other options? Typically yeast manufacturers use a range for how many yeast cells are going into each package. This can vary widely, especially from strain to strain. Next Gen offers a far more precise cell count across all strains allowing you to use the Whitelabs exclusive pitch calculator. Simply scan the barcode on the back of each package to be taken to their online calculator. Enter the volume, strength, and pitching temperature of the wort you are fermenting and the calculator tells you exactly how much yeast to pitch. You will be fermenting like a professional brewer, using the same concentration of yeast every time and enjoying more consistent results. Don't need a full package? Put the lid back on and store in the refrigerator for your next batch. Whitelabs has also increased the viability (the number of living cells in the package) over the shelf life of the yeast. Next Gen strains are grown in their unique, small-batch reactors to assure freshness and then packaged in a special film that allows for off-gassing, assuring that their viability is absolutely industry leading. Attenuation: 80-100% Flocculation: Medium Alcohol Tolerance: 15%+ ABV Optimum Fermentation Temp: 65-68°F Cell Count: 150 Billion For best results we always recommend ordering an ice pack with your liquid yeast. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
A great yeast for making traditional Italian Style wines. BM45 Brunello Dry Wine Yeast is an Italian isolate that is recommended for Sangiovese and extended maceration wines. It is a slow starter and moderate fermenter. BM45 has high nutritional needs; it should be used in conjunction with Go-Ferm (AD342) and Fermaid K (AD345) in order to minimize H2S production. In red wines, BM45 brings out aromas described as fruit jams, rose petals and cherry liqueur, with notes of sweet spices, licorice and cedar. It should be noted that BM45 may produce a "gamey" quality immediately post alcoholic fermentation, that will age out in about 6 months. Best results from 64 to 82 degrees F, with an alcohol tolerance up to 16%. Download the PDF Download the PDF
Cream soda extract from Gnome Soda. Concentrated flavor extract for making your own sodas. Mix with water and sugar, then either carbonate by bottle conditioning with yeast, or force carbonate in a keg.
4 oz package makes up to 5 gallons of root beer. One gallon size makes up to 160 gallons or root beer.
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 3-gallon size works great for splitting up batches, making mead, and topping off wine.
Our top recommendation for glass carboys.
Fits a #6.5 rubber stopper. It can also accommodate a #6 rubber stopper or a #6–7 universal stopper/medium carboy hood.
Specifications:
Weight: 9.0 lbs
Dimensions: 17.0"H x 9.5"W x 9.5"D
Made in Italy
Lightly colored ale with some sweetness from the honey
Our Gluten Free recipes use Sorghum extract for the base fermentables
Includes Kent Goldings and Northern Brewer hops
Estimated ABV: 5.6%
Estimated IBUs: 15-18
Makes 5 gallons of finished beer
This ale recipe features the use of clover honey, dried rice extract and sorghum. Try adding some dark candi syrup to give it some color.
Gluten-Free beers are a different world when it comes to finding a suitable replacement for the base extract. Celiacs are allergic to the hordein protein found in the base malts such as 2-Row and Pilsner malt.
They are also allergic to the gliadin protein found in wheat which is the biggest offender of the two proteins. As a homebrewer your goal is to find a suitable fermentable that can emulate the maltiness in beer.
Our Gluten Free recipes use Sorghum extract for the base fermentables. Hops aggressively cut through the maltiness from sorghum easily. Hop additions in gluten free beers tend to be 40-50% less than normal.
All our gluten-free kits include dry yeast due to the small traces of the gliadin protein found in liquid yeast. (Although lab research has found the yeast metabolize the gliadin protein after fermentation and significantly reduce the ppm present.)
Makes 5 gallons
Estimated Alcohol Percentage: 5.5-6%
Estimated Original Gravity:1.055-60
SRM (Color Range): 4-6
IBU's: 15-18
For all-in-one brewers and BIAB brewers, lifting the grains from your vessel can be daunting task. Give your back a rest and use the Lift-N-Lock pulley system to effortlessly lift up your grain bag or malt pipe and while your sweet wort drains into the kettle. This heavy-duty pulley is made from strong nylon strapping, laser cut 304 grade stainless steel and is capable of lifting large heavy loads with ease. It's the perfect pulley for lifting the heavy malt pipe from your BrewZilla or other all-in-one system, especially when brewing high gravity beers with a massive grain bill. It's a bit more expensive than other pulley systems, but there's no comparison when it comes to easily lifting or lowering the malt pipe. The included strap is 10m long by 25mm wide (32.8 ft. x 1 in.).
The pulley system enables you to multiply your pulling force by 4 times. If you apply 60 lbs of pulling force, the pulley can lift 240 lbs with relative ease. Be sure that the beam you mount the pulley to is rated for the total amount of force being applied i.e. pulling force plus load weight, so for this example 300+ lbs.
KegLand Item Number: KL30885
Use this adapter to connect your beer line cleaning pump directly to a sanke keg coupler. This allows you to back flush cleaning solution through your lines without having to remove the faucet. Simply attach your D-style coupler, open your facuet, and pump solution through.
Adapter only. Does not include beer line cleaning pump or coupler.
The Helix Coil makes for an excellent false bottom replacement, and installs easily on most cooler mash tuns and kettles. No matter how the coil rests, whether in a perfect circle or looped, the Helix works effectively as long as it isn't kinked. Measures 3.3 ft. in length and can be cut shorter if desired. Replace your bulky mash tun false bottom or install in your boil kettle as a trub filter. Made from 304 grade stainless steel. If your kettle has 1/2" FPT on the inside, you will need a 1/2" MPT nipple to attach the tee. Ideal for clean, simple, and efficient lautering Can be placed in all different shapes and loops as long as the spiral is not kinked Can be easily trimmed to a shorter length if desired Easy to clean, dishwasher safe Made from 304 grade stainless steel Stainless tee piece included Kegland Part Number KL10764
A sessionable, clean, malty beer that finishes dry
Includes a single addition of Kent Goldings hops
Estimated ABV: 3.5%
Estimated IBUs: 15-18
Makes 5 gallons of finished beer
Clean malty beer that finishes on the dry side. Low hops, along with low alcohol percentage, make this beer a great session beer!
Makes 5 gallons
Estimated Original Gravity: 1.032-35
SRM (Color Range): 19-25
IBUs: 15-18
Estimated Alcohol Percentage: 3.5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
A simple wheat ale recipe with raspberry flavoring that will surely be a crowd pleaser
Includes a dash of Cascade hops
Estimated ABV: 4%
Estimated IBUs: 11-15
Makes 5 gallons of finished beer
A low hopped beer featuring wheat malt, dextrin malt for body and natural raspberry flavoring. A crowd pleaser and a good party beer.
Makes 5 gallons
Estimated Original Gravity:1.041-45
SRM (Color Range): 7
IBUs: 11-15
Estimated Alcohol Percentage: 4%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
