Protect your wine from oxidation!
If you store wine in a variable volume tank in an environment that is not perfectly temperature controlled and the temperature drops, the wine in the tank will contract. As the wine contracts it creates a vacuum and pulls air into the tank. Even in a temperature controlled environment sampling will pull in small amounts of air. The traditional airlocks used in variable volume lids allow air to enter. If air does not enter the tank through the airlock (say if you had a solid stopper in place of the airlock), the internal vacuum pulls on the entire lid, which often causes a gasket failure. The solution is to replace your airlock with our MoreWine Inert Gas Bleeder.
What's Included
Our system comes with a tank lid connection, and diaphragm bleeder regulator. Not included is the stainless variable volume tank, high-pressure gas tank, regulator, or tubing to connect to a high-pressure regulator.
How to Use
As you can see in the picture, the traditional white airlock (on Italian Tanks) or the black screw plastic screw fitting (on our Speidel tanks) is replaced with our white tank connection fitting.
The Diaphragm Bleeder Regulator allows for inert gas to be pulled through a one way valve on demand without putting actual pressure on the tank. If the temperature increase and the wine expands the excess pressure also vents out of this Bleeder Regulator.
If you plan to use Variable Volume tanks for long term storage we strongly recommend these systems as a safety guard against oxidation. Tips:
The correct pressure to set the tank regulator to for use with the WE399 is 2-5 psi. The bleeder valve that is part of this kit has an auto blow off at 10 psi, so having the regulator any higher than that will cause the bleeder valve to vent to the atmosphere and thus drain your gas tank.
Note: The inlet is noted with a molded text "CO2" next to the barb fitting.
The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing. Inkbird controllers allow you to control both heating and cooling, and set independent differentials for each to keep the exact temperature you need.
The Ink bird ITC-308S controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control. Aside from brewing uses, this is a great dual relay output temperature controller for cooking (use in a smoker or bbq), home growing (heat mats for seedlings, climate control), or any other DIY project you come up with!
Features:
Simple plug and play design with user friendly LED interface
Dual stage ITC-308 - control both heating and cooling
Adjustable Heating/Cooling differential
1000W max power
Celsius or Fahrenheit
High and low temperature and sensor fault alarms
Can control temperatures of -58° F through 210° F (-50° C - 99° C)
Body Dimensions: 5.5 in x 2.7 in x 1.3 in
With the WiFi enabled Inkbird controller you can monitor your fermentation temperature from virtually anywhere with an internet connection. Adjust settings with your mobile device and receive push notifications from the free companion app, InkbirdSmart, available for both iOS and Android. The app also collects data from the controller and displays the information as a daily graph of your fermentation's temperature activity.
Please note the controller will only work with 2.4 GHz WiFi routers.
The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing. Inkbird controllers allow you to control both heating and cooling, and set independent differentials for each to keep the exact temperature you need.
The Inkbird ITC-308 WiFi controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control. Aside from brewing uses, this is a great dual relay output temperature controller for cooking (use in a smoker or BBQ), home growing (heat mats for seedlings, climate control), or any other DIY project you come up with!
Features:
WiFi Enabled - requires 2.4 GHz router
Free companion app available for iOS and Android devices
Simple plug and play design with user friendly LED interface
Dual stage ITC-308 - control both heating and cooling
Adjustable Heating/Cooling differential
1000W max power
Celsius or Fahrenheit
High and low temperature and sensor fault alarms
Can control temperatures of -58° F through 210° F (-50° C - 99° C)
Body Dimensions: 5.5 in x 2.7 in x 1.3 in
Power Cord - 4.5 ft.
Temp Probe Cord - 6 ft.
The Inkbird WiFi Sous Vide precision cooker will help you cook professional-quality meals. Simply pair it with the Inkbird Smart app to manage your cooking from anywhere within your home WiFi network.
WiFi Remote Control
Download the Inkbird Smart App on your iPhone or Android, allowing you to control the cooker from anywhere in the house and keep an eye on your meal's cooking status. Share your device with your family or friends on the app, without the limitations of multiple connections.
Uniform and Fast Heat Circulation
Water circulation and 1000-watt power heats water quickly and evenly. Suitable for vegetables, meat, fruit, cheese, eggs and much more. Choose recipes from the app on your phone or on the cooker's LCD screen.
Easy to Use and No Noise
No other equipment needed. Put the precision cooker on any pot of water and drop in your food items in a sealed bag or glass jar. Simply set the time and temp on the cooker or on the companion app. The sous vide cooker works quietly as it cooks.
Protection and Temperature Alarm
This unit will stop working and alert you when the water level is lower than the minimum value or when the temp reaches the target setting value. The stainless steel portion is easy to clean after use. Please note that the product is not waterproof. Do not submerge past the max line.
Specifications:
120V / 60hz
Heating Power: 1000W
Temp Control Range: 77-210°F
Directional Pump: 360-degree heating
WiFi: 2.4 Ghz 802.11n
LCD Display
Use in conjunction with an Enolmatic or Enolmaster filler to filter wine inline as you are bottling. Saves time by eliminating a separate step and allows you to filter without using a pump or exposing your wine to oxygen. This filter unit is placed inline between the product and the filler itself.
Filters are available in 5, 1 and .5 micron ratings. The filter cartridges used with this housing can be cleaned and re-sanitized for future useage. Wash by running PBW (CL25) followed by a hot then a cold rinse. Re-sanitize immediately after washing and then again just prior to the next use with SaniClean (CL27).
Our FE390A is just like the FE390, except we took off the barbs and left the fittings up to you. So many of our customers wanted this option, we decided to make it a kit and allow other people to get creative! Works well with our polysuphone QD's. The unit features a stainless thermometer, stainless tee, and a stainless oxygenation stone. The barb on the stone is 3/8".
How long should I apply oxygen while transferring to the fermenter? — We recommend you transfer half of your wort to your fermenter before applying inline oxygen (O2) to your wort transfer. If you apply O2 the whole time while transferring you are wasting O2.
This completely stainless, inline oxygenation system injects oxygen into your wort as it travels from your wort chiller to fermenter and allows you to read the temperature coming out of your wort chiller at the same time. It has a 3" Dial Stainless thermometer and a 2 micron diffusion stone. The inlets and outlets are 1/2" barb. The oxygen inlet is 3/8". It is the economical alternative to our completely sanitary, stainless oxygen system, PRO30.
How long should I apply oxygen while transferring to the fermenter? — We recommend you transfer half of your wort to your fermenter before applying inline oxygen (O2) to your wort transfer. If you apply O2 the whole time while transferring you are wasting O2.
A must-have accessory for the BrewRO System! The TDS Monitor hooks up to the incoming and outgoing lines of the BrewRO to measure total dissolved solids. By flipping the switch back and forth you'll be able to see the level of total dissolved solids present in the water entering the system and how pure the water is coming out. Under normal conditions, the Brew RO System will output water that measures between 0 - 2 ppm TDS (99.9998% purity). The best part of the TDS Monitor is that it removes the guesswork of when to change your filters. When the outgoing measurement reads 3 ppm or higher, it's time to order a new set.
This is the Thermometer half of the FE390. One side has a 3/8" Barb and the other has a 1/2" fnpt. Add a H616 barb or use alone or thread on to a 1/2" npt fitting. It is used to measure the temperature on the outflow side of your counterflow wort chiller.
How
long should I apply oxygen while transferring to the fermenter?
We recommend you
transfer half of your wort to your fermenter before applying inline
oxygen (O2) to your wort transfer. If you apply O2 the whole
time while transferring you are wasting O2.
Replacement inner mesh bag for Marchisio Stainless Bladder Presses. This nylon sack fits just inside the stainless pressing screen prior to loading the press and provides a quick and easy way to manage the pressed pomace.
300L -- WE170
450L -- WE175
Replacement Inner Nylon Sack for Speidel Bladder Press. This nylon sack fits just inside the Stainless pressing screen prior to loading the press and provides a quick and easy way to manage the pressed pommace.
20L -- GER101S
40L -- GER102S
90L -- GER104 / GER104S
180L -- GER106
If you're ready to step up to all grain brewing, this converted insulated cooler works wonders as a mash tun! The 14-gallon size can hold upwards of 25 lbs of grain, so there's plenty of room for even the strongest 5-gallon beer recipes and is perfect for most 10 gallon batches up to 1.070 SG. Comes pre-assembled with stainless steel perforated false bottom, high temperature silicone tubing, and 1/2" female threaded ball valve. Pair the valve with the male threaded fitting (plus a little plumber's tape) that best suits your setup and you'll off and running. The cooler also works perfectly as a Hot Liquor Tank. Use with the false bottom in place, or simply remove it and keep it on hand in case you decide to use the cooler as a Mash Tun down the road. Two of these coolers plus the Fermentap Sparge Arm Assembly work perfectly as a gravity fed all-grain setup. To connect the cooler's ball valve to the sparge arm assembly, we recommend a 1/2" MPT x 3/8" Barb fitting and 3/8" ID silicone tubing. Plumber's tape will ensure you have a leak-proof connection between the barb fitting and the ball valve. Includes: Insulated beverage cooler Max Volume: 14.7 Gal (56 L) Stainless dome-shaped perforated false bottom High temperature silicone tubing Stainless 1/2" BSP ball valve External Dimensions: Approx. 19" L x 19" W x 22" H KegLand Part Number: KL04671 Please note: the mash tun may come with a little extra silicone tubing than what's needed. Check that your false bottom is sitting flat and in the middle of the cooler and cut off excess tubing if needed.
Use this insulating jacket to regulate the fermentation temperature in your 30L FermZilla All Rounder. The jacket alone will help keep your fermenter warm in the colder months, or you can add a FermWrap heater if the heat fermentation isn't enough to maintain temp. Conversely, you can freeze bottles of water and put them inside the jacket to keep the temperature from getting too hot. If you're feeling extra fancy, use frozen water bottles and a FermWrap plugged into a temperature controller. The frozen water bottles will provide constant cooling, and if the controller detects that the temperature has dropped too far, it will kick on the FermWrap to heat your fermenter back up to your target temp. The jacket has the added benefit of protecting your fermenting beer from harmful UV light. Features a single sided zipper and draw string bottom. Kegland Part number: KL19590
Use this insulating jacket to regulate the fermentation temperature in your 55L FermZilla Conical. The jacket alone will help keep your fermenter warm in the colder months, or you can add a FermWrap heater if the heat fermentation isn't enough to maintain temp. Conversely, you can freeze bottles of water and put them inside the jacket to keep the temperature from getting too hot. If you're feeling extra fancy, use frozen water bottles and a FermWrap plugged into a temperature controller. The frozen water bottles will provide constant cooling, and if the controller detects that the temperature has dropped too far, it will kick on the FermWrap to heat your fermenter back up to your target temp. The jacket has the added benefit of protecting your fermenting beer from harmful UV light. Features a single sided zipper and draw string bottom. Kegland Part number: KL11495
Use this insulating jacket to regulate the fermentation temperature in your 27L FermZilla Conical or 60L FermZilla All Rounder. The jacket alone will help keep your fermenter warm in the colder months, or you can add a FermWrap heater if the heat fermentation isn't enough to maintain temp. Conversely, you can freeze bottles of water and put them inside the jacket to keep the temperature from getting too hot. If you're feeling extra fancy, use frozen water bottles and a FermWrap plugged into a temperature controller. The frozen water bottles will provide constant cooling, and if the controller detects that the temperature has dropped too far, it will kick on the FermWrap to heat your fermenter back up to your target temp. The jacket has the added benefit of protecting your fermenting beer from harmful UV light. Features a single sided zipper and draw string bottom. Kegland Part number: KL1148
The Intertap faucet is a forward sealing faucet with a modular, threaded spout which can fit a variety of different attachments including a growler filler or a stout spout.
In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transferring to your beer while you pour.
Other forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time.
The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all.
Made of chrome plated brass.
Kegland Part number: KL00987
Get all of the amazing features and functionality out of your Intertap faucet! This kit includes all of the accessories that can be paired with the Stainless Steel Intertap forward sealing faucet. Whether you want to fill a growler or pour a stout, this faucet does it all. Everything you need to dispense from and maintain your Intertap faucet! This Kit Includes: Stainless Steel Intertap Beer Faucet (D1210) Intertap Stout Spout (D1213) Intertap Growler Filler Spout (D1214) Intertap Ball Lock Spout (D1217) Intertap Self-Closing Faucet Spring* (D1212) Intertap Seal & Gasket Kit (D1215) *Does not include shank.
Forward-sealing design prevents beer residue from gumming up the faucet!
Threaded spout can be replaced with a variety of attachments
Unique sliding shuttle design allows the faucet to last longer than standard floating o-ring design
304 stainless steel construction
The patented Stainless Steel Intertap Faucet is a forward sealing faucet that represents the most modern faucet design. It has a modular, threaded spout which can fit a variety of different attachments including a growler filler or a stout spout.
In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour.
Other forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time.
The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all.
304 Stainless Steel construction so you don't have to worry about chrome plating wearing off and exposing your beer to brass.
Kegland Part number: KL00970
Your go-to solution for crafting wines that are bursting with fresh, fruit-driven character
Whether you're perfecting a crisp summer rosé or an aromatic white wine, this strain brings out the best in your ingredients, delivering consistency and clarity in every batch
Unleash the full potential of fruit-forward wines
BE FRUITS is meticulously engineered to enhance the vibrant, fruit-forward characteristics of your wines. Selected for its robust fermentation capabilities and exceptional ester production, this strain brings out the natural sweetness and aromatic complexity of grape musts. Ideal for winemakers seeking to craft wines with pronounced fruitiness, crisp acidity, and a clean, refined finish.
High Ester Production: Enhances aromatic intensity with notes of ripe berries, tropical fruits, and stone fruits.
Rapid Fermentation: Optimized for efficient, clean fermentation with minimal lag time.
Alcohol Tolerance: Supports ABV levels up to 14%, perfect for a wide range of white and rosé wines.
Temperature Range: Ferments effectively between 54°F (12°C) and 75°F (24°C) for controlled flavor development.
Low H₂S and SO₂ Production: Ensures cleaner fermentation and reduces off-flavors.
Enhanced Mouthfeel: Promotes glycerol production for a smooth, well-rounded body.
Applications:
White and Rosé Wines: Amplifies the natural fruit flavors in varietals such as Albariño and other aromatic whites.
Ciders: An excellent choice for cider fermentations where clean, bright flavor expression is desired.
Flavor Profile:
Aromatic Esters: Produces vibrant aromas of red berries, stone fruits, and tropical fruits.
Enhanced Fruit Expression: Accentuates the bright, juicy qualities of the fruit while maintaining a clean fermentation profile.
Crisp Finish: Finishes clean with a slight hint of residual sweetness that complements natural fruit acidity.
Usage:
Rehydration: Rehydrate in 10 times its weight of water at 95°F (35°C) for 15–20 minutes.
Pitch Rate: Use 1–1.5 grams per gallon (0.25–0.4 grams per liter) for optimal fermentation.
Nutrient Addition: Supplement with yeast nutrient to ensure a robust and complete fermentation, particularly in low-nitrogen musts.
Fermentation Temperature: Maintain a steady temperature between 54°F and 75°F for optimal flavor retention and ester production.
BE THIOLS is the ideal choice for winemakers aiming to craft highly aromatic, fruit-driven wines with exceptional tropical complexity
Whether enhancing a crisp Sauvignon Blanc, perfecting a lively rosé, or adding depth to a white blend, this yeast strain delivers explosive aromatics and unmatched varietal expression
Unleash vibrant tropical aromatics and enhance wine complexity
BE THIOLS is a specialized Saccharomyces cerevisiae yeast strain developed to maximize the release of varietal thiols during fermentation, resulting in wines with pronounced tropical fruit aromas and a clean finish. This strain is particularly effective in white and rosé wines where aromatic intensity and freshness are desired.
Enhanced Thiol Release: Promotes the liberation of varietal thiols, intensifying notes of passion fruit, guava, and grapefruit.
Aromatic Precision: Elevates the varietal character with bold tropical and citrus expressions while maintaining balance and avoiding excessive herbaceousness.
Clean Fermentation Profile: Exhibits low production of volatile acidity, hydrogen sulfide (H₂S), and sulfur dioxide (SO₂), preserving the wine's purity and freshness.
Alcohol Tolerance: Capable of fermenting musts up to 15% ABV, ensuring complete fermentation across various wine styles.
Optimal Fermentation Range: Performs best between 59°F (15°C) and 77°F (25°C), allowing for flexibility in fermentation strategies.
Rapid Fermentation Kinetics: Initiates fermentation quickly with a short lag phase, contributing to efficient winemaking processes.
Applications:
Sauvignon Blanc: Enhances tropical fruit and citrus zest characteristics, ideal for styles emphasizing freshness and aromatic intensity.
Rosé Wines: Amplifies berry and citrus aromatics, delivering vibrant and refreshing profiles.
White Blends: Adds complexity to blends such as Chenin Blanc, Colombard, and Viognier, highlighting lifted fruit characters.
Aromatic Whites: Suitable for varieties like Riesling and Gewürztraminer, boosting floral and tropical notes.
Flavor Profile:
Tropical Fruits: Dominant aromas of passion fruit, guava, and mango.
Citrus Accents: Refreshing notes of grapefruit zest and lime contribute to brightness and acidity.
Floral Undertones: Subtle hints of elderflower and orange blossom add complexity and lift.
Clean Finish: Maintains varietal integrity with bright aromatics and a smooth mouthfeel.
Usage:
Rehydration: Rehydrate in 10 times its weight of chlorine-free water at 95°F (35°C) for 15–20 minutes, stirring gently to prevent clumping.
Pitch Rate: Use 1–1.5 grams per gallon (0.25–0.4 grams per liter) for optimal thiol expression and flavor development.
Nutrient Addition: Supplement with yeast nutrients to prevent sluggish fermentation and maximize thiol release.
Fermentation Temperature: Maintain between 59°F and 77°F to enhance tropical esters and prevent off-flavors.
Maximizing Thiol Potential: Utilize thiol-rich grape varieties and consider prefermentative skin contact to further enhance aromatic lift.
Liquid gum arabic for colloidal protection
IOC Flashgum R Liquid™ helps reduce the risk of colloidal deposits in bottled wine and cider.
Protects color in reds, rosés, and fruit wines
Gives perception of sweet and soft characters on the palate
Reduces astringency and increases the perception of volume and fullness in the mouth
Especially usefully in unfiltered wines, where it can minimize colloidal sediment
Can be added 24-72 hours before bottling and does not impact filtration throughput (if filtering)
Gum arabic derived from Acacia seyal
Stage of Winemaking: Pre-bottling
Requires Racking: No
Impact: Colloidal protection, sweetness
Format: Liquid
Formulation: Gum arabic
Frequently used in: Reds, whites, rosés, fruit wines, cider
Recommended Dosage: Bench trials recommended
Wine 400–1200 ppm (40–120 mL/hL) (1.5–4.5 L/1000 gal)
Usage: Flashgum R Liquid should be the last commercial product added to the wine.
Flashgum R Liquid should be added to wine that has already been protein-stabilized and pre-filtered (DE, lenticular, sheet filtration, or crossflowed) just prior to bottling. If available, it is best to use an inline dosing pump to incorporate Flashgum R Liquid into the wine. If an inline dosing pump is unavailable, add product and mix well to obtain even distribution.
If the wine will be filtered at the time of bottling, it is recommended that the addition be done 24–72 hours prior to bottling to allow for proper integration. Flashgum R Liquid is able to pass through final membrane filters (0.45 μm) found on most bottling lines, though filtration is not required after adding Flashgum R Liquid.
It is strongly recommended to conduct bench trials to assess Flashgum R Liquid’s potential impact on filterability and to ensure accurate dosing for colloidal stability.
Storage: Dated expiration. Store in a cool, dry, odor-free environment. Reseal opened packaging immediately.
GAIA is the ideal solution for winemakers focused on crafting expressive, aromatic wines with natural clarity and a refined finish
Whether creating a fresh rosé or a nuanced Viognier, GAIA delivers purity, elegance, and balance in every glass
Harness the essence of nature with elegant aromatics and balanced structure
GAIA is a premium wine yeast strain developed to enhance aromatic expression, mouthfeel, and fermentation consistency across a wide range of wine styles. Inspired by the harmony of nature, GAIA brings forth vibrant notes of stone fruit, citrus zest, and floral undertones, all while delivering a smooth, well-rounded body. With its clean fermentation profile and reliable kinetics, GAIA is ideal for winemakers seeking purity, elegance, and expressive fruit character.
Enhanced Aromatic Complexity – Promotes bright expressions of peach, apricot, and citrus, layered with subtle floral notes.
Silky Mouthfeel – Stimulates polysaccharide and glycerol production for a full, rounded palate.
Clean Fermentation – Low volatile acidity and minimal SO₂ production help preserve fruit clarity and freshness.
Alcohol Tolerance – Effective up to 15% ABV, suitable for a wide range of musts.
Temperature Range – Performs best between 57°F (14°C) and 68°F (20°C), supporting gentle, expressive fermentations.
Medium Flocculation – Settles well post-fermentation, reducing sediment and aiding clarity.
Applications:
White Wines – Enhances fruit and floral intensity in Chardonnay, Riesling, and Pinot Grigio.
Rosé Wines – Elevates notes of strawberry, peach, and citrus for a fresh, vibrant profile.
Aromatic Whites – Ideal for Viognier, Gewürztraminer, and Chenin Blanc where floral complexity is desired.
Light Red Wines – Suitable for Pinot Noir and Gamay, emphasizing red fruit brightness and smooth tannins.
Flavor Profile:
Stone Fruits – Peach, apricot, and nectarine provide a ripe and vibrant core.
Citrus & Floral Notes – Lemon zest, orange blossom, and honeysuckle add aromatic lift.
Balanced Acidity – Maintains crispness and structure with a clean finish.
Silky Texture – Promotes a rounded mouthfeel that enhances drinkability and elegance.
Usage:
Rehydration – Rehydrate in 10 times its weight of chlorine-free water at 95°F (35°C) for 15–20 minutes. Stir gently to prevent clumping.
Pitch Rate – Use 1–1.5 grams per gallon (0.25–0.4 g/L) depending on must composition.
Nutrient Addition – Recommended in low-nitrogen musts to ensure healthy fermentation and full attenuation.
Fermentation Temperature – Maintain between 57°F and 68°F to preserve fruit and floral aromatics.
Cold Fermentation – Ideal for cool fermentation regimes where fresh aromatics and refined texture are prioritized.
Gelatin for improving clarity and aromas
IOC Inocolle™ is a multi-purpose gelatin that is equally useful in juice and wine for clarification and improving aromas.
In red wines, it can improve texture, aromas, and flavors of the finished wine
In red wines, can mildly reduce bitterness and astringency, though COLLE PERLE is better for extremely tannic wines
Can remove unstable/colloidal material
It is particularly useful for juice fining and flotation
Flocculates and settles well, especially when used in conjunction with the silica gel GELOCOLLE
Partially hydrolyzed gelatin solution
Stage of Winemaking: Juice, wine (pre-bentonite addition)
Contact Time: 1 week
Impact: Clarification and aroma revelation
Formulation: Gelatin
Frequently used in: whites, rosés, fruit wines, cider
Recommended Dosage: Bench trials recommended for wine
Juice or wine 300-1000 ppm (30–100mL/hL ) (1.1-3.8 L/1000 gal)
Usage - Juice: Dilute Inocolle 1:1 in water 15–25°C (59–77°F). Add to juice gradually and mix thoroughly. Rack once settled.
Usage - Wine: Dilute Inocolle 1:1 in water 15–25°C (59–77°F). Add Inocolle to wine gradually and mix thoroughly. Racking should be done after settling (typically 1 week). It is not recommended to leave gelatins in wine for more than 30 days. Inocolle can be used in conjunction with GELOCOLLE to improve settling or prevent overfining in whites, rosés, and ciders (see scottlab.com/fining for directions).
Storage: Dated expiration. Store in a cool, dry, odor-free environment. Once opened, use immediately.
German malts and English hops collide. BKG Bomb is a far cry from today's modern, citrus-forward IPAs
Includes Magnum and British Kent Goldings hops
Estimated ABV: 7.2%
Estimated IBUs: 84-88
Makes 5 gallons of finished beer
Where do German Malts and English Hops exist side by side in peace and unlikely harmony. In our BKG Bomb of an IPA! This big brusing beer, with an amazing mouth feel from copius amounts of German Munich Malt, is big on deep malt flavor and big on alcohol. It is the antithesis of todays super citrusy hopped, pale colored IPAs. This is all about malt, malt, malt and how British Kent Goldings (BKG) hops blend oh so well with a malt heavy beer. British Kent Goldings are the most prized ale hops in England and known for their subtle nature and floral aromas that really compliment malt flavors. Do you need a little extra sustenance to make it through the winter? Do you like to slice your beer with a knife? Do you need a break from over-the-top hopped IPA's? If you answered yes to any of these questions, The BKG Bomb IPA II should be your next beer.
Features 10 lbs of German Munich Malt and 3 lbs of American Pale. As if that was not enough we also include some Carapils for body building. The 4 oz of British Kent Golding hops in the finish provided for a unique and authentic English flavor. Bittered with 2oz of Magnum hops for a firm bitterness to stand up to all the malt.
Makes 5 gallons
Estimated Original Gravity: 1.073-77
SRM (Color Range): 12
IBUs: 84-88
Estimated Alcohol Percentage: 7.2%
(Makes 5 gallons)
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
German malts and English hops collide. BKG Bomb is a far cry from today's modern, citrus-forward IPAs
Includes Magnum and British Kent Goldings hops
Estimated ABV: 7.2%
Estimated IBUs: 84-88
Makes 5 gallons of finished beer
Where do German Malts and English Hops exist side by side in peace and unlikely harmony. In our BKG Bomb of an IPA! This big brusing beer, with an amazing mouth feel from copius amounts of Munich Malt Extract, is big on deep malt flavor and big on alcohol. It is the antithesis of todays super citrusy hopped, pale colored IPAs. This is all about malt, malt, malt and how British Kent Goldings (BKG) hops blend oh so well with a malt heavy beer. British Kent Goldings are the most prized ale hops in England and known for their subtle nature and floral aromas that really compliment malt flavors. Do you need a little extra sustenance to make it through the winter? Do you like to slice your beer with a knife? Do you need a break from over-the-top hopped IPA's? If you answered yes to any of these questions, The BKG Bomb IPA II should be your next beer.
Features 9 lbs of Munich Malt Extract along with an extra pound of light Dried Malt Extract. As if that was not enough we also include Maltodextrin for body building. The 4 oz of British Kent Golding hops in the finish provided for a unique and authentic English flavor. Bittered with 2oz of Magnum hops for a firm bitterness to stand up to all the malt.
Makes 5 gallons
Estimated Original Gravity: 1.073-77
SRM (Color Range): 12
IBUs: 84-88
Estimated Alcohol Percentage: 7.2%
This kit is not available in a Dry Malt Extract option.
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Explore the evolution of one of craft beer's most popular styles, India Pale Ale. Loaded with brewing tips from some of the country's best brewers, IPA covers techniques from water treatment to hopping procedures. Included are 48 recipes ranging from historical beers to recipes for the most popular contemporary IPAs made by craft brewers such as Deschutes Brewery, BrewDog, Firestone Walker Brewing Company, Pizza Port Brewing, and Russian River Brewing Company.
Irish moss is a specific type of algae that is used as a thickener in a variety of products. In beer making, Irish moss is added during the last 15 minutes of the boil, to help coagulate and settle out proteins. It improves formation and compaction of the hot-break, the gelatinous mass that forms after boiling and during cooling. Some users recommend prior rehydration in water, or a full hour boil with Irish moss, but common usage is 15 minutes in the boil.
Usage: 1 tsp. per 5 gallons
Chemical name: Chondrus crispus
One of our best-selling kits of all time, Irish Red Ale is decidedly malt-forward with a distinct caramel flavor
Includes Northern Brewer and Willamette hops
Estimated ABV: 4.8%
Estimated IBUs: 39-46
Makes 5 gallons of finished beer
Our Irish Red Ale recipe is hard to nail down as any specific style—similar to a big Amber Ale, but it's so unusual it does not really fit within any category. Malt character utterly dominates this beer's flavor profile, containing dark Crystal malts, including Special B, and a pinch of Roasted Barley for a deep, red color and a very distinctive caramel flavor. Irish Red Ale has been one of our most popular ingredient kits for many years, and continues to receive a lot of positive feedback from satisfied customers to this day. If you're going to be venturing into new realms of taste discovery, this is a winning ticket we can solidly recommend!
Makes 5 gallons
Estimated Original Gravity: 1.046-53
SRM (Color Range): 20-22
IBUs: 39-46
Estimated Alcohol Percentage: 4.5-5.0%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
One of our best-selling kits of all time, Irish Red Ale is decidedly malt-forward with a distinct caramel flavor
Includes Northern Brewer and Willamette hops
Estimated ABV: 4.8%
Estimated IBUs: 39-46
Makes 5 gallons of finished beer
Our Irish Red Ale recipe is hard to nail down as any specific style—similar to a big Amber Ale, but it's so unusual it does not really fit within any category. Malt character utterly dominates this beer's flavor profile, containing dark Crystal malts, including Special B, and a pinch of Roasted Barley for a deep, red color and a very distinctive caramel flavor. Irish Red Ale has been one of our most popular ingredient kits for many years, and continues to receive a lot of positive feedback from satisfied customers to this day. If you're going to be venturing into new realms of taste discovery, this is a winning ticket we can solidly recommend!
Makes 5 gallons
Estimated Original Gravity: 1.046-53
SRM (Color Range): 20-22
IBUs: 39-46
Estimated Alcohol Percentage: 4.5-5.0%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Our Irish Red Ale recipe is hard to nail down as any specific style—similar to a big Amber Ale, but it's so unusual it does not really fit within any category. Malt character utterly dominates this beer's flavor profile, containing dark Crystal malts, including Special B, and a pinch of Roasted Barley for a deep, red color and a very distinctive caramel flavor. Irish Red Ale has been one of our most popular ingredient kits for many years, and continues to receive a lot of positive feedback from satisfied customers to this day. If you're going to be venturing into new realms of taste discovery, this is a winning ticket we can solidly recommend!
Compared to the Extract version of this kit, the Mini Mash recipe swaps out some of the malt extract for 2-row malt. And the special instructions included with the kit will walk you through conducting a miniature mash that goes beyond the typical steeping grain process in standard Extract recipes.
Makes 5 gallons
Estimated Original Gravity:1.047-52
SRM (Color Range): 20
IBUs: 39-43
Estimated Alcohol Percentage: 5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. The recommended yeast(s) can be found below. All grains will come milled.
Please Note: In order to better serve our customers, we are now offering our extract recipe kits with either Liquid Malt Extract (LME) or Dried Malt Extract (DME). The majority of our DME kits were converted from the LME version, which is why you may notice slight variances in the extract names and quantities on your recipe sheet. You may also find that your Specific Gravity and ABV% are slightly higher if you choose DME. Whether LME or DME, add all extracts provided according to the recipe sheet. For further details, please reference the conversion chart below.
MoreBeer! Extract Recipe Kit Conversion Chart
Liquid Malt Extract
Dry Malt Extract
4 lbs
3.5 lbs
5 lbs
4 lbs
6 lbs
5 lbs
7 lbs
6 lbs
8 lbs
6.5 lbs
9 lbs
7 lbs
Ultralight Malt Extract
Golden Light DME
Pale Malt Extract
Golden Light DME
Pilsner Malt Extract
Pilsen Light DME
Medium bodied, beautiful red color, and toasty, graham cracker malt character. Where Helen’s was the face that launched 1,000 ships, this is the beer that’s launched thousands of homebrewing careers. One of our all time best-selling recipes--one sip and you’ll understand why!
Color/Body: Red/Medium
Bitterness: Medium
Estimated Alcohol: 4.5%
A Dry Stout in the style of Guinness with flaked barley for a wonderfully creamy head
Includes a single addition of Magnum hops
Estimated ABV: 6%
Estimated IBUs: 41-45
Makes 5 gallons of finished beer
Here it is, a Dry Stout in the style of Guinness. Flaked Barley helps to provide all the protein that is needed to produce that wonderfully creamy head. 43 IBU of bitterness compliments the dryness of the Roasted Barley to produce authentic Irish Dry Stout. The liquid yeast is of course from Irish decent.
Makes 5 gallons
Estimated Original Gravity: 1.060-64
SRM (Color Range): 35
IBUs: 41-45
Estimated Alcohol Percentage: 6%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
A Dry Stout in the style of Guinness with flaked barley for a wonderfully creamy head
Includes a single addition of Magnum hops
Estimated ABV: 6%
Estimated IBUs: 41-45
Makes 5 gallons of finished beer
Here it is: a Dry Stout in the style of Guinness. Flaked Barley helps to provide all the protein that is needed to produce that wonderfully creamy head. 43 IBU of bitterness compliments the dryness of the Roasted Barley to produce authentic Irish Dry Stout.
Makes 5 gallons
Estimated Original Gravity: 1.060-64
SRM (Color Range): 35
IBUs: 41-45
Estimated Alcohol Percentage: 6%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. The recommended yeast(s) can be found below. All grains will come milled.
Please Note: In order to better serve our customers, we are now offering our extract recipe kits with either Liquid Malt Extract (LME) or Dried Malt Extract (DME). The majority of our DME kits were converted from the LME version, which is why you may notice slight variances in the extract names and quantities on your recipe sheet. You may also find that your Specific Gravity and ABV% are slightly higher if you choose DME. Whether LME or DME, add all extracts provided according to the recipe sheet. For further details, please reference the conversion chart below.
MoreBeer! Extract Recipe Kit Conversion Chart
Liquid Malt Extract
Dry Malt Extract
4 lbs
3.5 lbs
5 lbs
4 lbs
6 lbs
5 lbs
7 lbs
6 lbs
8 lbs
6.5 lbs
9 lbs
7 lbs
Ultralight Malt Extract
Golden Light DME
Pale Malt Extract
Golden Light DME
Pilsner Malt Extract
Pilsen Light DME
This rich red wine hails from Valpolicella in the Veneto region of north-eastern Italy. Traditionally, Amarone is made from only three approved grape varieties—Corvina, Corvinone, and Rondinella. To prepare the grapes, winemakers use a process known as ‘apassimento’, an Italian term for drying the harvested grapes for up to several months to concentrate the sugars and flavor. Amarone is known for its full-body, strong flavor, and high alcohol percentage. Some speculate Amarone’s creation to date back to Ancient Rome, as this powerful red would have slaked the Roman’s thirst for highly alcoholic wine. Our Italian Amarone has an immersed dark fruit essence of black cherry and plum backed up by notes of chocolate and a moderate oak character. Full-bodied and dry with an alcohol content of 13.5% by volume. The VineCo Estate Amarone is best enjoyed over a hearty meal of red steak or venison with good company, or as an after-dinner treat paired with heartfelt conversation with that special someone. Not to be poured on any occasion, but savored as a delicious moment. Amarone Style, Italy Black cherry, plum and chocolate Sweetness: Dry Oak: Medium Body: Full ABV: 13.5% Kit Volume: 10 L Approximate Yield: 23 L Ready to bottle in 6 weeks Bottle Labels sold separately
Italian Amarone Style offers a complex flavor profile and delicious oak character
Savor with hearty meals or as an after-dinner treat
Flavors of tart cherry, raspberry, chocolate, and spice
Full-bodied and dry, 14% ABV
Whip up a batch in 30 mins or less! Yields 6 gallons (2 cases) of finished wine in 6-8 weeks
Premium kit includes grape skins for an authentic wine making experience
Bottle labels included for a professional finish
Amarone style red wine hails from Valpolicella in the Veneto region of north-eastern Italy. Traditionally, Amarone is made from only three approved grape varieties—Corvina, Corvinone, and Rondinella. To prepare the grapes, winemakers use a process known as ‘apassimento’, an Italian term for drying the harvested grapes for up to several months to concentrate the sugars and flavor. Amarone is known for its full-body, strong flavor, and high alcohol percentage. Some speculate Amarone’s creation to date back to Ancient Rome, as this powerful red would have slaked the Roman’s thirst for highly alcoholic wine.
Our Italian Amarone Style has a deep red fruit quality with notes of tart cherry and raspberry, a hint of chocolate and spice, with a moderate oak character. Standing tall at 14% alcohol by volume, this full-bodied wine is quite dry with a long lingering finish.
The Signature Series™ Amarone Style is one of the most satisfying kits to make thanks to the inclusion of grape skins. You’ll mirror the professional vintner process of “punching the cap”, which makes your winemaking adventure even more hands on. VineCo’s jammy skin packs are much more expressive than dried grape skins, imparting more character from the grapes and boosting tannin structure in the finished wine.
High quality French oak cubes are used in the making of the Amarone Style kit. One of the reasons oak has always been used to age wine is the slow release of delicious, complex compounds that complement the wines flavor. Oak cubes have more depth of flavor than chips or powder and slowly release compounds like furfural (sweet, caramel like), lignins (vanillin, spice, smoke), and lactones (classic oak flavor). French oak in particular is known to deliver refined, less apparent oakiness than American oak. It's famous for adding mouthfeel and flavors of custard and chocolate while still allowing the fruit flavors of the wine to shine through.
The Vineco Signature Amarone Style is best enjoyed over a hearty meal of red steak or venison with good company, or as an after-dinner treat paired with heartfelt conversation with that special someone. Not to be poured on any occasion, but savored as a delicious moment.
Amarone Style, Italy
Tart cherry, raspberry, hint of chocolate and spice
Sweetness: Dry
Oak: Medium
Body: Full
ABV: 14%
Kit Volume: 14 L
Approximate Yield: 23 L
Ready to bottle in 6-8 weeks
Grape skins included
Bottle labels included
Deep, dark, and inviting, the finish is long, lingering, and full of ripe tannins
Full-bodied and dry, 13.5% ABV
Tastes great with heavy meat like beef or lamb with gorgonzola sauce
Yields 6 gallons (2 cases) of finished wine in approximately 6 weeks
2007, 2008, 2011 & 2013 WineMaker International Award Winner
This classic Italian style wine is packed with rich raspberry, blackberry and cassis flavors. Deep, dark, and inviting, the finish is long, lingering, and full of ripe tannins.
2007, 2008, 2011 and 2013 WineMaker International Award Winner.
Food Pairings
Tastes great with heavy meat like beef or lamb with gorgonzola sauce.
Amarone Style, Italy
Sweetness: Dry
Oak: Heavy
Body: Full
ABV: 13.5%
Kit Volume: 12L
Approximate Yield: 23L
Ready to bottle in 6 Weeks
Spicy bouquet with black cherry, tobacco, licorice, and coffee notes. Flavorful with delicious dark fruit, leather, cassis, and pepper notes
Full-bodied and dry, 14.7% ABV
Enjoy with braised beef, tomato sauce and pasta or gouda cheese
Yields 6 gallons (2 cases) of finished wine in approximately 8 weeks
Includes Genuwine Grape Skins to enhance color, flavor profile, and bouquet of the finished wine
Silver Medal Winner of the WineMaker International Amateur Wine Competition 2023
WineMaker Top 100 Wine Kits of 2023
A spicy bouquet with black cherry, tobacco, licorice, and coffee notes. The palate is big, round, and flavorful with delicious dark fruit, leather, cassis, and pepper notes.
Includes 2 liters of Genuwine Crushed Grape Skins. Fermenting your wine on GenuWine Grape Skins will add deep hues, enhanced bouquet, and a lingering finish to our select red wines.
2011, 2013, 2014 WineMaker International Award Winner and 2017 Best of Show Kit WineMaker International Award Winner.
Food Pairings
Enjoy with braised beef, tomato sauce and pasta or gouda cheese.
Amarone Style, Italy
Sweetness: Dry
Oak: Medium
Body: Full
ABV: 14.7%
Kit Volume: 14L
Approximate Yield: 23L
Ready to bottle in 8 Weeks
Extraordinarily rich, with buttery aromas and flavors that are balanced by lush tropical fruit and full oak character
Full-bodied and off-dry, 13.8% ABV
Enjoy with shellfish, baked ham or medium cheddar cheese
Yields 6 gallons (2 cases) of finished wine in approximately 6 weeks
2007, 2008 & 2011 WineMaker International Award Winner
This modern and bold Italian style white blend is extraordinarily rich, with buttery aromas and flavors that are balanced by lush tropical fruit and full oak character.
2007, 2008, and 2011 WineMaker International Award Winner.
Food Pairings
Enjoy with shellfish, baked ham or medium cheddar cheese.
White Blend, Italy
Sweetness: Dry
Oak: Heavy
Body: Full
ABV: 13.8%
Kit Volume: 12L
Approximate Yield: 23L
Ready to bottle in 6 Weeks
Replacement jaws kit for Ferrari Italian floor corkers. The new and improved jaws are made from acetal resin and have replaced the old style that were made from brass/chrome. Compatible with corkers W540, W542, W543, W544, and W546.
Includes:
Acetal resin jaws
Springs
Screws
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 3-gallon size works great for splitting up batches, making mead, and topping off wine.
Our top recommendation for glass carboys.
Fits a #6.5 rubber stopper. It can also accommodate a #6 rubber stopper or a #6–7 universal stopper/medium carboy hood.
Specifications:
Weight: 9.0 lbs
Dimensions: 17.0"H x 9.5"W x 9.5"D
Made in Italy
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 5 gallon size works great as a secondary fermenter and for fermenting meads/wine.
Our top recommendation for glass carboys.
Specifications:
Weight: 12.4 pounds each
Dimensions: 20.0"H x 11.0"w x 11.0"d
Country of origin: Italy
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 6 gallon size works great as a primary fermenter for beer, wine and mead.
Our line of Itailan carboy is our top recommendation for glass carboys.
Specifications:
Weight: 14.0 pounds each
Dimensions 21" x 11"
Country of origin: Italy
Premium Italian glass carboy fermenter made from thick, high-quality, lead-free glass
Uniform thickness with less internal defects than standard glass carboys
Perfect for fermenting beer, wine, cider, mead, and more!
Clear glass allows you to monitor fermentation activity as it happens
Threaded neck finish compatible with carboy hoods
6.5-gallon size offers plenty of headspace for vigorous fermentations
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This large 6.5 gallon size carboy fermenter is perfect for 5 gallon batches as there is plenty of head space to avoid blow-off during fermentation.
This carboy has a smaller threaded neck than standard carboys, and requires a specific hood for use with racking, and fermenting.
Our line of Itailan carboy is our top recommendation for glass carboys.
Specifications:
Weight: 20.0 pounds each
Dimensions: 21.0"h x 12.5"w x 12.5"d"
Country of origin: Italy
Imported grape picking bucket from Italy with a sturdy handle. Is more maneuverable than a 5 gallon bucket when trying to get in and around grapevines and is also much easier to carry. They do a lot of handpicking in Italy... they have it figured out!
*Basket color may vary
Imported grape picking bucket from Italy with a sturdy handle. Is more maneuverable than a 5 gallon bucket when trying to get in and around grapevines and is also much easier to carry. They do a lot of handpicking in Italy... they have it figured out!
*Basket color may vary
Montepulciano is the second most widely planted grape throughout Italy, behind only Sangiovese, to which it is rumored to be a long lost relative. Notorious for ripening late, but with patience this grape will produce beautifully deep colored wines with high acidity.
Our Italian Montepulciano has an exquisite dark fruit essence of red plum and sour cherry accented by subtle herbal notes and medium oak character. Medium- full-bodied and dry with an alcohol content of 13.5% by volume.
The VineCo Estate Montepulciano is the perfect choice for your "staying in" nights. This wine pairs perfectly with pizzas with mounds of meat toppings, brisket tacos, or just about anything you'd pull off the barbecue or smoker.
Montepulciano, Italian
Sour cherry, subtle herbal
Sweetness: Dry
Oak: Medium
Body: Med-Full
ABV: 13%
Kit Volume: 10 L
Approximate Yield: 23 L
Ready to bottle in 6 weeks
Luxurious flavors of dark plums and chocolate greet the nose, while hints of blackberries, toasted oak, and spices are found on the palate
Medium-bodied and dry, 13.7% ABV
Serve with Italian pastas such as gnocchi or wild mushroom and risotto
Yields 6 gallons (2 cases) of finished wine in approximately 5 weeks
Includes Genuwine Dried Grape Skins to enhance color, flavor profile, and bouquet of the finished wine
Luxurious flavors of dark plums and chocolate greet the nose, while hints of blackberries, toasted oak, and spices are found on the palate of this great Italian classic.
Includes 125 g of Genuwine Dried Grape Skins. Genuwine grape skins are crushed, whole grape skins, gently dried in a proprietary process that preserves their original color and fresh vineyard flavor. Fermentation on Genuwine dried grape skins enhances the color, flavor profile and bouquet of wine. Genuwine grape skins are easy to work with and consistently provide excellent results.
Food Pairings
Serve with Italian pastas such as gnocchi or wild mushroom and risotto.
Nebbiolo, Italy
Sweetness: Dry
Oak: Medium
Body: Medium
ABV: 13.7%
Kit Volume: 8L
Approximate Yield: 23L
Ready to bottle in 5 Weeks
Grape skins included
