This is a 304 stainless steel blow off tube for Ss Brewtech 14 gallon Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a built-in relief valve. The two-piece cane has an outer diameter of 15 mm (approx. 9/16") and 3/8" NPT where they connect. 3" TC gasket and clamp not included.
This is a 304 stainless steel blow off tube for Ss Brewtech 7 gallon Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a relief valve built into the cane. 3" TC gasket and clamp not included.
If you bought a 3" TC dome lid for your standard Chronical this covers up that large 3" tri clamp opening. 1/2" tubing or an airlock and #2 stopper fit nicely in the 17mm hole. This cap comes standard with Brewmaster Chronicals and only fits on a 3" tri clamp flange. Comes with a 1/2" hose barb and pressure relief valve. 3" tri clamp gasket and clamp not included.
This stainless steel ball valve is the perfect match to most homebrewing kettles with a 1/2" coupler or nipple on the bottom. The 3-piece design makes it easy to take apart and keep clean, preventing any spoilage organism from lingering between batches. It has a 1/2" FPT inlet and outlet.
Stainless steel 3-piece ball valve with tri-clamp connections. A great option for T.C. kettles, pumps, and conicals to go from 1.5" tri-clamp to any 1.5" tri-clamp connection or accessory. Full port for higher flow rate.
Stainless steel 3-piece ball valve with tri-clamp connection and 1/2" female NPT out. A great option for T.C. kettles, pumps, and conicals to go from 1.5" tri-clamp to any 1/2" male threaded connection or accessory. Full port for higher flow rate. A seat in the back of the valve allows for the installation of a pick up tube or racking arm.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. MB Pro Brewing Systems are very well constructed and represent an amazing overall value. They also boast a very impressive feature set. Our Pro Insulated Mash Tun features slotted 3-piece false bottom, adjustable-height sparge arm, 4" TC port for optional grist hydrator, and a host of other key features guaranteed to satisfy the expectations of today's pro brewer. The mash tun has a slotted plate screen with a large grain out port on the side. The optional hydrator allows you to mix grain with hot liquor if you have your mill or grist case above the mash tun. There is a large top access for manual stirring. The walls of the mash tun are insulated to provide stable mashing temperatures. While intended for a single infusion mash, step mashing can be performed by recirculating through a heat exchanger. The sparge arm is adjustable in height and it is intended to have an inch of water above the grain and have the bottom of the diverted plate resting on top of the grain for low oxygen pickup during recirculating and sparging. We recommend that you use a grant to avoid creating suction on the bottom of the mash screen. It is possible to pull 23,000 lbs of force on the screen with a pump and a fully stuck mash and even partial vacuums can produce significant force. Alternatively, you can install a vacuum breaker ahead of the pump. Replacement screens are available for special order. We strongly recommend using a Wort Grant when pumping off the mash tun to avoid the possibility of collapsing the screens. Great Quality from MB Our brewing systems are made at a family owned manufacturer in the Ningbo region of China. Ningbo is where most premium beer tanks and brewing vessels come from and represents a known style and level of quality when compared to other areas of China. Our professional brewhouse equipment is designed by our in-house R&D designer Colin Kaminski, a former brewmaster for 15 years. Cleanability, ease of use, and durability are our primary design criteria. Our manufacturing partner in China is a father/son team that takes great pride in what they do. Some discount dealers buy from different manufacturers who offer one-off deals. That can be fine one time but not the next. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. All Features: Insulated for low heat loss Slotted 3 pieces false bottom Large side grain out door Removable grain out chute 4" TC grain inlet port for optional grist hydrator Adjustable Height Sparge Arm for better HSA performance Sparge Arm has two inlets, HLT and Recirculation. Large top lid for easy stirring PT10 Probe Analog Temp Gauge Internal LED Light Specifications for 3.5 bbl Mash Tun: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 56" Height w/ Hydrator: 72" Tank Diameter: 41" Empty Weight: 360 lbs Working Volume: 3.5 bbl Max Volume: 4.6 bbl Manway: 20.8" x 16.9" All ports are 1.5" TC except for 4" TC Sparge Arm Port, 4" TC Grist Hydrator Port, DN80 LED Light Port Please note: the primary image shows the mash tun with optional grist hydrator (sold separately). Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Isolated, studied and selected from the prestigious Côte de Nuits terroir in Burgundy during a three-year research project by Laboratory Burgundia Oenologie in Beaune, France. The goal of this selection program was to find a dominant natural yeast strain from a traditional “cold soak” that would elaborate intense, complex and balanced Pinot Noir varietal character. The 3001 strain stood out from other strains. Wines made with it were noted for fruit and varietal characters that were both elegant and complex. This yeast has moderate nitrogen demands but will benefit from proper nutrition and aeration, these factors becoming increasingly important as your potential alcohol content rises above 13%. This strain is tolerant to standard SO2 additions and low temperatures (down to 12°C/54°F) for a steady and reliable alcoholic fermentation following cold soak. The 3001 yeast is specifically for high quality cold soak Pinot Noir destined for aging. Download the PDF Download the PDF
32 fl oz amber 'growlette'. You will also need a 38 mm screw top, which is not included. 38mm is the same finish as most standard screw top growlers.
Sold individually or in a case of 6.
Keep track of everything on brew day with this handy brewing journal. This journal will keep all of your brewing notes organized and professional. Good brewing notes make good beers. Bound with recycled cardboard, this journal is a compact 5 in. x 7 in.
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.
Ready to dive into distilling, but unsure how to piece together your home still? Check out these complete systems that will set you on the path to producing high quality spirits. This kit comes with the 35L DigiBoil Electric Kettle and the Copper Pot Still Condenser.
The Copper Pot Still is perfect when you want the flavor of the wash to come through, whereas a reflux still is more favorable for producing pure, unflavored spirits. If you want to make whiskeys and gins, this pot still top is a great way to start! The classic "V" shape captures the vital esters, aldehydes, and phenolic compounds that are necessary for the complex spirits such as whiskeys and gins. Made from solid copper. When your hot spirit comes into contact with the copper, the copper acts like a catalytic converter to drive sulfur out of the spirit. This leads to less off-flavors and higher quality spirit.
Kit Includes:
35L DigiBoil Gen 2 (110V or 220V)
110V / 15A power and plug (5 ft. cord)
220V / 15A power
NEMA 6-15 plug (5 ft. cord)
Copper Reflux Still Condenser w/ Barb Connections
13 mm Inlet/Outlet Barbs (0.51 in.)
Distillation Lid & Gasket
Set of Adjustable Lid Clamps
Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.
Ready to dive into distilling, but unsure how to piece together your home still? Check out these complete systems that will set you on the path to producing high quality spirits. This kit comes with the 35L DigiBoil Electric Kettle and the Copper Reflux Still Condenser.
The Copper Reflux Still Condenser is designed to create high percentage pure neutral spirit. It features a flow management device, which makes it extremely easy to use. No need to worry about fine tuning the water flow speed. As long as your providing enough coolant or cold water running through the condenser, the flow rate doesn't matter. The purity of the spirit can be controlled by two included flow control inserts. These brass inserts come with a 1.0mm hole and 0.6mm hole. As the hole gets smaller, the rate at which the spirit exits the condenser will decrease, thus increasing your reflux ratio and the purity of your spirit.
If you want to make whiskeys and gins we recommend checking out the pot still kit!
Made from solid copper. When your hot spirit comes into contact with the copper, the copper acts like a catalytic converter to drive sulfur out of the spirit. This leads to less off-flavors and higher quality spirit.
Kit Includes:
35L DigiBoil Gen 2 (110V or 220V)
Copper Reflux Still Condenser w/ Barb Connections
13 mm Inlet/Outlet Barbs (0.51 in.)
Distillation Lid & Gasket
Set of Adjustable Lid Clamps
Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).
Replacement 3mm thick gasket for the 35L Distillation Lid. Note: The 3mm gasket works well with Gen 3 and older BrewZillas and Gen 1 DigiBoils. If you have a newer model, we recommend the 6mm Gasket for a better seal. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. KegLand Part Number: KL03490
Replacement 6mm thick gasket for the 35L Distillation Lid. Note: This 6mm gasket offers an improved fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. KegLand Part Number: KL03490
This stainless 4" tri-clover ball lock lid is a direct replacement to the lid that comes on our kegmenters.
Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty Kegmenter, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the keg.
Noryl plates, 40cm x 40cm for adding to middle of filter. 2 gaskets are included and installed on each plate. Usually used to add plates to one of the 40x40 filters we sell. Each filter lists the maximum number of plates it will accept. Made from heat resistant Noryl plastic, allowing you sterilize with steam if you choose.
A new 5 lb CO2 tank is one of the required purchases when you’re changing over from bottling to kegging your beer.
This brand new 5 lb aluminum CO2 tank ships free in the 48 contigous states. Aluminum tanks will never rust, which is why we prefer them over steel tanks. The capacity refers to the amount of compressed (liquified) CO2 the tank can hold. 5 lbs of CO2 is enough to dispense 8 to 9 5-gallon kegs of homebrew.
All new CO2 tanks are shipped empty and will require either filling or exchanging for a full tank. Most local homebrew shops will stock gas to exchange, and many local welding supply companies can fill tanks on site.
CO2 tanks should always be stored in an upright position.
Dimensions: 14.33" Tall x 5.25" wide.
Made from corrosion resistant, engineered Aluminum
New high quality CGA-320 valve
DOT approved
Brand new aluminum 5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 5 lb tank because it holds 5 lbs of compressed (liquified) CO2. 5 lbs of CO2 is enough to dispense about 8 to 9x 5-gallon kegs of homebrew.
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
18" T x 5.25 Ø
DOT approved
New high quality CGA-320 valve
Light weight compared to steel tanks
Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear
Sixth Barrel Keg holds 55x 12 oz beers or 41x 16 oz pints
Compact and easy to fit multiple kegs in home kegerators or keezers
Commercial quality construction—produced and tested in an ISO 9001 Certified facility
Supply your brewery with the best kegs on the market with these 5.16 gallon 1/6 Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery.
The sixth barrel keg, commonly referred to as a sixtel keg, is a great option for bars and restaurants that want to offer a variety of beers but don't have the space for multiple full size kegs. They're also a great option for kegerators, as two or three sixtels will fit inside depending on the model.
Holds 55 x 12 oz beers (41 x 16 oz pints).
Features:
5.16 gal (1/6 bbl) US Sanke keg
304 Stainless Steel Construction
23" Height, 9.25" Diameter
MicroMatic D System (U.S. Sankey) Spear
Working pressure is 43.51 psi (3.0bar)
Good for the first step-up off a plate or from 10ml to 50 ml
Great Flask for yeast culturing.
In the lab world, these flasks are known as "Student Grade". A great flask for making yeast starters! (Student grade is not the highest grade flasks and will have minor defects)
Kegland Part Number: KL03933
This 50 mL glass graduated cylinder is lab grade, and allows you to measure and dilute liquids with accuracy and ease! These class-A, lab quality graduates are designed to deliver accurate measurements while remaining resistant to breakage and a wide range of chemicals. Includes a plastic volume marker. Suitable for all general lab work.
This cylinder is approximately 8.5" tall.
Keep your catch of the day fresh with the Igloo® Marine Ultra 54 Quart Cooler. It’s designed with Ultratherm® insulation for optimal cooling performance and has an integrated fish ruler on the lid. The marine-grade design can withstand to the wet conditions and features rust-resistant stainless steel screws, ultraviolet inhibitors, and a stainless steel hinged latch.
Features:
Ultratherm® insulated lid offers cooling performance
Holds 83 cans
Features an integrated fish ruler on lid
Ultraviolet inhibitors protect the cooler against sun damage
Rust-resistant stainless steel screws and lid strap
Stainless steel hinged latch
Recessed triple-snap drain plug makes clean up simple
Marine-grade hinges
Non-slip grip handles provide comfortable carrying
Capacity: 54 Quart
Dimensions: 26.375” x 15.5” x 15.5”
Weight: 8.1 lbs.
Manufacturer’s warranty: 1-year
Country of Origin : United States of America
Style : 44683
DSG Pro Tips
Brand : Igloo
A yeast strain that really brings out aromatic components in white wines, especially Pinot Gris, Gewurztraminer, Riesling, Viognier and Semillion. Also a great choice for mead fermenations where it has a significant aroma/flavor input. Specifically Fruity/Floral aromas are emphasized through the natural liberation of terpenes found in these varieties. What we think is particularly unique about this strain is the creation of smoky/spicy aromas. Also selected as a commercial yeast strain for its ability to create mouthfeel volume and richness. So to recap - fruity/floral/smoky/spicy aromas and flavors with good mouthfeel... where do we sign up! Lallemand recommends adding Go-Ferm during rehydration and Fermaid K to the ferment to ensure that this strain ferments to dryness. Download the PDF Download the PDF
The wide 6" TC mesh screen attaches to a 6" TC port to allow the SCOBY to breathe, while also preventing any foreign material from entering the Brew Bucket.
Attaches to a 6" TC port. Compatible with the Kombucha Lid and the legacy Booch Tanks.
Sold Individually.
1.9-2.5 °L - Canada Malting - Canada Malting's 6-Row malt has a higher enzyme content than your standard 2-row base malt. Ideal for use in conjunction with adjuncts. Excellent base malt for use in wheat beer production.
Malt Specification:
Moisture % - max. 4.5
Extract fine % dm - min. 80
Color °L - 1.9 - 2.5
Protein % dm - max. 13
2.3 L - Rahr Malting - Rahr 6-Row malt is excellent for any high-adjunct brew. 6-Row's high enzyme content is very beneficial when mashing with unmalted oats, corn, rice, etc. Approximately 1.7° L in color.
If this malt is currently out of stock or you'd like to try out a different maltster, check out Canada Malting 6-Row.
Perfect for use as a 5-gallon batch beer fermenter or bottling bucket
Comes with a pre-drilled hole so you can pair it with the spigot of your choice—see recommended spigots below under "You Might Also Need"
Once you've upgraded to a carboy or other fermenter, the bucket will remain a reliable brewing tool for cleaning and sanitizing purposes
External volume markers provide a convenient reference point when filling the bucket with water to make cleaner or sanitizer solution
A six gallon food grade bucket for fermentation or bottling with a pre drilled hole and external volume markings up to five gallons. This bucket does not include a spigot. Our recommended spigots can be found below under You Might Also Need. To use as a fermenter you will need to pick up the optional lid, spigot, stopper, and an airlock.
If you use the bucket for fermentation be sure to use care when cleaning. Do not use any abrasive pads that would scratch. Once you get a scratch in a plastic bucket it is very hard to sanitize. This is also why we don't recommend storing equipment in a bucket between uses as a fermenter. A hot PBW soak is often a perfect way to clean a bucket, followed by a Star San soak for killing bacteria.
Please Note:
Buckets are translucent and do not come with lids
Buckets are not designed to hold pressure
Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage
Food-Grade to 180°F
The most affordable 5-gallon batch beer fermenter you'll find!
Food-grade plastic buckets make a perfect starter fermenter for beginner brewers—simply add a lid with stopper and airlock
Once you've upgraded to a carboy or other fermenter, the bucket will remain a reliable brewing tool for cleaning and sanitizing purposes
External volume markers provide a convenient reference point when filling the bucket with water to make cleaner or sanitizer solution
A food-grade six gallon plastic bucket perfect for all kinds of home beer or winemaking activities. Plastic buckets are often used as a fermenter, bottling bucket, or even sanitizer bucket. We go through thousands which helps keep our price down. If you want to use it as a fermenter you will also need to pick up the optional lid, stopper, and airlock. This bucket is also available in a version that includes a spigot (see recommended products below).
If you use this plastic bucket for fermentation be sure to use care when cleaning. Do not use any abrasive pads that would scratch. Once you get a scratch in a plastic bucket it is very hard to sanitize. This is also why we don't recommend storing equipment in a bucket between uses as a fermenter. A hot PBW soak is often a perfect way to clean a bucket, followed by a Star San soak for killing bacteria.
Bucket has external volume markings up to 5 gallons. 17.5" H x 12" Ø
Please Note:
Buckets are translucent and do not come with lids
Buckets are not designed to hold pressure
Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage
Food grade up 180°F
A sessionable, clean, malty beer that finishes dry
Includes a single addition of Kent Goldings hops
Estimated ABV: 3.5%
Estimated IBUs: 15-18
Makes 5 gallons of finished beer
Clean malty beer that finishes on the dry side. Low hops, along with low alcohol percentage, make this beer a great session beer!
Makes 5 gallons
Estimated Original Gravity: 1.032-35
SRM (Color Range): 19-25
IBUs: 15-18
Estimated Alcohol Percentage: 3.5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
A sessionable, clean, malty beer that finishes dry
Includes a single addition of Kent Goldings hops
Estimated ABV: 3.5%
Estimated IBUs: 15-18
Makes 5 gallons of finished beer
Clean malty beer that finishes on the dry side. Low hops, along with low alcohol percentage, make this beer a great session beer!
Makes 5 gallons
Estimated Original Gravity: 1.032-35
SRM (Color Range): 19-25
IBUs: 15-18
Estimated Alcohol Percentage: 3.5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Speidel has developed a stainless steel fermenting egg that combines the advantages of the egg shape with the advantages of a stainless steel tank and a unique design. The Black Eye looks like a space satellite from the outside and provides a gentle and well controllable fermentation inside. Due to its unique shape, the yeast can circulate smoothly during the fermentation phase. In science it is assumed that this free circulation is an advantage for the fermentation process and thus for the entire aroma spectrum. Thanks to the perfect welding seams and the highly smooth inner walls, the fermenting chamber is also very easy to clean.
Tank shell and tank bottom made of AISI304 stainless steel, surface IIId (2R), marbled outside
Tank top made of AISI316 stainless steel, surface IIId (2R), marbled outside
DOM NW400 centered in the middle og the tank top with flap lid with venting nozzle NW50 DIN11851
Free-standing base tank on three welded-on legs
Sampling - Weld-on thread NW10 DIN11851 with sealing cap (for the installation of sampling tap)
Racking Outlet - Weld-on thread NW50 DIN11851
Cooling Jacket - Laser-welded double jacket for cooling with two 1" BSP male threaded ports
Temperature Measurement - Weld-on thread NW10 DIN11851
Bottom Outlet - Vaulted, stable tank bottom, in bottom centre with forward drawn discharge pipe and outlet with thread NW50 DIN11851
Condition: New - Cosmetic Defect This unit is new. It is in new and good condition but has cosmetic defect(s) such as scratch(es) and/or dent(s). MoreWine! is proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Note: These stock tanks are outfitted with a single male threaded fitting which will accept either a Speidel Sample Valve or a Thermometer/Thermowell Combo. This fitting comes with a stainless steel cap. Either Sample Valve or the Thermometer can be added at the time of ordering or ordered seperately at any point in the future. Speidel tanks can be ordered with a variety of custom features when they are ordered as part of our annual PreSeason Sale. Key Features Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Thickness - Speidel tanks are on average around 25% thicker than Italian manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted for use with 1.5in TC. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Rubber Lid Gaskets - Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tank's wall. That means better protection for your wines! Check out our video covering tank features! For additional videos and other information, check out our information tabs above! Dimensions - 820mm D x 1328mm H
Ready to dive into distilling, but unsure how to piece together your home still? Check out these complete systems that will set you on the path to producing high quality spirits. This kit comes with the 65L DigiBoil Electric Kettle and the Copper Pot Still Condenser. The Copper Pot Still is perfect when you want the flavor of the wash to come through, whereas a reflux still is more favorable for producing pure, unflavored spirits. If you want to make whiskeys and gins, this pot still top is a great way to start! The classic "V" shape captures the vital esters, aldehydes, and phenolic compounds that are necessary for the complex spirits such as whiskeys and gins. Made from solid copper. When your hot spirit comes into contact with the copper, the copper acts like a catalytic converter to drive sulfur out of the spirit. This leads to less off-flavors and higher quality spirit. Kit Includes: 65L DigiBoil (220V) Copper Pot Still w/ Barb Connections Distillation Lid w/ Gasket Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. MoreBeer! is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). NOTE: Due to the size of this item, it is not eligible for international shipping.
Replacement 6mm thick gasket for the 65L Distillation Lid. Note: This 6mm gasket offers an improved fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. KegLand Part Number: KL32667
Set sail on an open "C" of incredible hop flavor. This IPA recipe features over half a pound of hops!
Includes Cluster, Citra®, Centennial, Columbus, Crystal, Chinook and Cascade hops
Estimated ABV: 7.3%
Estimated IBUs: 73-78
Makes 5 gallons of finished beer
Are you feeling bold enough to take on huge waves of hop flavor? Looking for an IPA with over a half pound of hops for 5.5 gallons!? Well, you've found this burried treasure! The 7 Deadly C's IPA is an incredible blend of seven different hops starting with a "C". With the interesting bittering characteristics of Cluster hops starting it off, to the tripple dry hop addition of Centennial, Chinook and Citra®, this is one IPA that all hop lovers will enjoy! The full list of hops included in this kit are: Cluster, Citra®, Centennial, Columbus, Crystal, Chinook and Cascade.
Order your 7 Deadly C's IPA today, and watch your boil kettle turn into a rolling sea of hops!
Makes 5 gallons
Estimated Original Gravity:1.070-75
SRM (Color Range): 7
IBUs: 73-78
Estimated Alcohol Percentage: 7.3%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Citra® is a registered trademark owned by Yakima Chief Hops, LLC.
Set sail on an open "C" of incredible hop flavor. This IPA recipe features over half a pound of hops!
Includes Cluster, Citra®, Centennial, Columbus, Crystal, Chinook and Cascade hops
Estimated ABV: 7.3%
Estimated IBUs: 73-78
Makes 5 gallons of finished beer
Are you feeling bold enough to take on huge waves of hop flavor? Looking for an IPA with over a half pound of hops for 5.5 gallons!? Well, you've found this burried treasure! The 7 Deadly C's IPA is an incredible blend of seven different hops starting with a "C". With the interesting bittering characteristics of Cluster hops starting it off, to the triple dry hop addition of Centennial, Chinook and Citra®, this is one IPA that all hop lovers will enjoy! The full list of hops included in this kit are: Cluster, Citra®, Centennial, Columbus, Crystal, Chinook and Cascade.
Order your 7 Deadly C's IPA today, and watch your boil kettle turn into a rolling sea of hops!
Makes 5 gallons
Estimated Original Gravity:1.070-75
SRM (Color Range): 7
IBUs: 73-78
Estimated Alcohol Percentage: 7.3%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Citra® is a registered trademark owned by Yakima Chief Hops, LLC.
The Brew Bucket was the first product and the origin of Ss Brewtech, and for many brewers, the Brew Bucket was their first chance to ferment in stainless steel. Nearly a decade later, Ss challenged their engineering team to pair some of the newest technologies with the original design.
Brew Bucket Pure Flow Valve
The star of the Brew Bucket 2.0 is the new Brew Bucket Pure Flow Valve. This valve uses Pure Flow technology, originally developed for the Ss line of professional brewhouses. The removable silicone membrane of the valve provides a sanitary environment where beer makes contact with nothing except silicone. Additionally, they have molded the racking arm geometry into the valve’s silicone diaphragm to provide a seamless flow path for beer when transferring from the Brew Bucket 2.0.
Sanitary Connection
The valve attaches to the Brew Bucket using a welded external garden hose thread fitting that allows for a compact, easy-to-use connection without the need to fumble with additional clamps and gaskets. The threads are located externally and sealed by the gaskets built into the Pure Flow silicone, keeping them clean and sanitary. With the new valve design, the brewer can fully rotate the racking arm 360 degrees for maximum control while racking a finished beer.
Conical Base
The Brew Bucket 2.0 continues what made the original a great solution for home brewers. The pro-inspired conical base helps minimize trub interaction with fermented beer, thus limiting any concerns of off flavors produced during maturation. Combined with the rotatable racking arm, brewers can effortlessly rack off clean beer like the pros do in craft breweries.
Full Width Lid
The Brew Bucket 2.0 features the same full-width removable lid as the original, with a wide access opening that makes cleaning and sanitizing a breeze. Finally, the included thermowell has been repositioned to the lid, and the increased length allows for accurate readings, even when brewing partial batches.
Features
Pro-Inspired Conical base
Blow off port in lid for airlocks or blow off tubing
Rotatable Silicone Racking Arm
Pure Flow Valve for transfers and gravity samples
304 Stainless Steel
7 gallon capacity
300m Thermowell
Thermometer | LCD Temp Display Module Dual Temp
Wide lid with secure spring clamps
Etched volume markings gals/liters
Welded carry handles
Surface safe Silicone Feet
Specs:
Tank Size: 7 gal
Batch Size: 5 gal
Dimensions: 24" H x 13" W x 13" D
Weight: 11 lbs
Upgrade your home brewery with an innovative, Stainless Steel, 7 Gallon Brew Bucket™ Fermenter! You will enjoy many of the benefits of a stainless conical fermenter but at a fraction of the cost and you are going to love how easy it is to use! Made by Ss Brewing Technologies from polished 304 Stainless Steel, the Brew Bucket™ fermentor is not only functional it is downright beautiful. At MoreBeer! we know brewing equipment and we truly believe this is a piece of equipment you are going to enjoy using every brew day.
We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer. The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking! Etched Volume Markers on the inside were super handy when filling and display in both Liters and Gallons.
The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid. The lid includes a removable, molded silicone gasket that ensures an airtight seal. We love an airtight seal so that we can be sure to see the airlock working. The welded on stainless handles make the BrewBucket fermentor super easy to move.
Overall: Very functional, easy-to-use, will last a lifetime, and looks amazing. Lets make some beer!
Features:
Certified Food Grade 304 Stainless Steel Construction
Patent Pending Stainless Rotating Racking Valve
6.95 gal Max Capacity
40° Conical Bottom for Trub Trapping
Nests for Storage, Stacks for Ferment!
Molded Silicone Lid Gasket
Spring Loaded Lid Clamps for Airtight Lid Seal
Offset Airlock Hole includes Silicone Stopper
Gallon & Liter Markers inside for visual volume assessment
Stainless construction resists damage and is easy to clean
21” Height x 13” Width
10 lbs
Note: 1/2" Silicone fits into the lid hole for use as a blowoff. 3/8" ID tubing is perfect for racking beer from the BrewBucket's valve.
Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear
Slim Quarter Keg holds 82x 12 oz beers or 62x 16 oz pints
A good middle-ground size with high-capacity but small enough to fit multiple kegs in larger kegerators or keezers
Commercial quality construction—produced and tested in an ISO 9001 Certified facility
Supply your brewery with the best kegs on the market with these 7.75 gallon 1/4 Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each keg is contructed entirely of Stainless Steel, ensuring a long serving life for your brewery.
The quarter barrel keg, commonly referred to as a slim quarter or tall quarter keg, is a great option for bars and restaurants that want to offer a variety of beers but don't have the space for multiple full size kegs.
Holds 82 x 12 oz beers (62 x 16 oz pints).
Features:
7.75 gal (1/4 bbl) US Sanke keg
304 Stainless Steel Construction
23" Height, 11.5" Diameter
MicroMatic D System (U.S. Sankey) Spear
Working pressure is 43.51 psi (3.0bar)
Extra-large food-grade plastic bucket fermenter perfect for wine kits or high krausen beers like Hefeweizen Almost a full 2 gallons larger than standard 6-gallon buckets giving you plenty more room for active fermentations and larger batches of wine or beer Comes complete with lid, airlock grommet, 3-piece airlock, and plastic spigot with rotating tap (see note below)
If you do not require a spigot or other accessories, the 7.9-gallon bucket can also be purchased by itself This is a 7.9 gallon plastic fermenter complete with lid, airlock, and spigot. The rotating spigot allows you to push the bucket deeper into your counter or benchtop without obstruction. When it's time to transfer out, bring the bucket to the edge of your counter and rotate the spigot to point down. These buckets are made from Polypropylene and are ideal for all types of fermentations, especially beers with high krausen. Why Polypropylene? These buckets are made from polypropylene as it is less porous and significantly smoother than other HDPE fermenters. HDPE is porous and can harbor microbial activity making it more difficult to clean and sanitize. Being less porous, polypropylene also does not absorb aroma like HDPE so there is less flavor carry over from batch to batch. Kit Includes: 7.9 gallon plastic bucket Plastic lid with hole and grommet Airlock Spigot Please note: the spigot hole comes pre-molded into the bucket and needs to be drilled out before installing the spigot. We recommend using a 5/8" drill bit and taking care not to strip the female threads that accept the spigot. The spigot includes a back nut that won't be needed—simply remove the back nut and thread in the spigot with the gasket in between the neck of the spigot and the bucket. The lid forms a very tight seal and requires a decent amount of downward force to lock in place.
Extra-large food-grade plastic bucket perfect for fermenting wine kits or high krausen beers like Hefeweizen Almost a full 2 gallons larger than standard 6-gallon buckets giving you plenty more room for active fermentations and larger batches of wine or beer The bucket comes solid and does not require a spigot but features pre-molded threads where a spigot can be added if you so choose To add a spigot, you will need to drill out the wall at the back of the spigot hole—we recommend pairing with our Plastic Spigot w/ Adjustable Spout Bucket only without lid or spigot. See here for optional lid or full fermentation kit A 30L (7.9 gal) food-grade plastic bucket. Ideal for all fermentations, but especially ideal for wine kits, beers that tend to have a high krausen (Hefe) and any fermentation that is slightly too large for your 6-gallon pail. These buckets come molded with a threaded hole for a spigot to screw into. Our FE356 spigot threads in perfectly. Why Polypropylene? These buckets are made from polypropylene as it is less porous and significantly smoother than other HDPE fermenters. HDPE is porous and can harbor microbial activity making it more difficult to clean and sanitize. Being less porous, polypropylene also does not absorb aroma like HDPE so there is less flavor carry over from batch to batch. Approximate Dimensions: 15.75" Wide x 16.25" Tall Click here for optional lid (FE357B) or full fermentation kit (FE357). Please note: the spigot hole comes pre-molded into the bucket and needs to be drilled out before installing the spigot. We recommend using a 5/8" drill bit and taking care not to strip the female threads that accept the spigot. The spigot includes a back nut that won't be needed—simply remove the back nut and thread in the spigot with the gasket in between the neck of the spigot and the bucket. The lid forms a very tight seal and requires a decent amount of downward force to lock in place. KegLand Part number: KL0158
This adapter can be installed on the Core 360 Mini Regulator from Kegland in order to use 74 gram CO2 cartridges. Use a crescent wrench to remove the stock adapter piece for 12 gram cartridges and simply screw in this adapter with 5/8-18 UNF female threading. Switching to 74 g cartridges will allow you dispense 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required. TR21-4 Male Thread x 5/8-18 UNF Female Thread Adapter only. Regulator and CO2 cartrdige sold separately. KegLand Part Number: KL2041
Standard 8 gram CO2 cartridge replacement. Package contains 10 CO2 cartridges. Works with the GrowlerWerks pressurizeable uKeg Growler.
Mr.Fizz 8-gram CO2 Cartridge Features:
99.95% pure CO2
Fits all Seltzer Bottles
NonRefillable one-time use only
Cartridges measure approx. 2.5" long x 11/16" Diameter
8 gram Co2 Cartridges
10 Cartridges per box
Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.
A-CIP is a specially formulated acid detergent designed for use in cleaning, descaling, and passivation applications. The blend of nitric and phosphoric acid and low foaming surfactant makes it ideally suited for circulation cleaning applications. The blend of nitric and phosphoric acid is designed to solubilize beer stone, milkstone, and a variety of inorganic deposits. Applications: Removes organic residue from: Circulation / Clean In Place systems Brewery and beverage systems Stainless steel cleaning / passivation Specifications: Color: Pink Fragrance: Acidic pH Range: < 2 Dilution: 1 - 5 oz. / gal. Density: 9.92 HAZMAT: UN3264 DOT HAZMAT - 8 Corrosive Liquid, Acidic, Inorganic, NOS (Containing Nitric Acid and Phosphoric Acid) Please note: Intended for commercial use. Due to HAZMAT shipping restrictions, this product is required to ship via freight. It will ship directly from the manufacturer on its own pallet. If you order multiple SIS products, they will be condensed onto a single pallet, unless your order also contains sanitizers. Sanitizers must be shipped on a separate pallet from caustics and acids. HAZMAT items are not able to be returned.
