A new stainless steel, replacement body connect for the gas side of your pin lock cornelius keg keg. Features 2 pins on the side which denote it as being for gas. Does not include poppet. 9/16-18 UNF threads.
Convert any pinlock keg over to a ball lock keg. Ideal for any homebrewer that has their home draft setups already assembled with ball lock fittings. Includes both gas and beverage body connects.
Replacement body O-ring for Euro 30 pump. This O ring is slightly smaller than the O-Ring in the head of the PMP530 & PMP535.
In Documents Tab:
Position: 6
EnoItalia Item #: G2151
German Pilsner malt lends a more authentic flavor than our standard Pilsner recipe. Generously hopped with Saaz
Includes 100% Saaz hops
Estimated ABV: 5.4%
Estimated IBUs: 32-36
Makes 5 gallons of finished beer
Classic Czech Pilsner with lots of the classic Saaz hop flavor. The base malt is German Pilsner malt. If you have access to very soft, or distilled, water, you will have even greater success in creating this style. This kit differs from KIT585 in that it features German Pilsner malt for the more authentic flavor.
Makes 5 gallons
Estimated Original Gravity: 1.054-58
SRM (Color Range): 5
IBUs: 32-36
Estimated Alcohol Percentage: 5.4%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Ever wanted to punch out a few more gallons of wort with your 35L BrewZilla? Maybe you wanted more strike water for a super sticky batch. Maybe you get boil overs a lot and would like a bit of extra protection. Now there's a solution! The all new 35L BrewZilla Boiler Extension adds 3.1 gallons of headroom. Turn that 9.2G BrewZilla or DigiMash system into a 12.3G behemoth! The extension kit is also great for distilling! Extend the height of your pot still by attaching one or more boiler extensions. For distillation, we recommend upgrading to the Adjustable Lid Clamps which allow you to dial in the tension for a better seal. If you're struggling to get an airtight seal when using the Distillation Lid, these clamps can help provide more tension. Compatible with Gen 3 / Gen 4 BrewZillas. Please Note: The 110V unit may struggle to bring 10+ gallons of wort to boil. Expect longer heating times and a more gentle boil. An insulating jacket is highly recommended if using the 110V model. You Might Also Need: 35L Extended Malt Pipe 35L Wire Support Ring Recirculation Arm Extension KegLand Part Number: KL22231
Ever wanted to punch out a few more gallons of wort with your 65L BrewZilla? Maybe you wanted more strike water for a super sticky batch. Maybe you get boil overs a lot and would like a bit of extra protection. Now there's a solution! The all new 65L BrewZilla Boiler Extension adds 6.3 gallons of headroom. Turn that 17G BrewZilla or DigiMash system into a 23G behemoth! The extension kit is also great for distilling! Extend the height of your pot still by attaching one or more boiler extensions. For distillation, we recommend upgrading to the Adjustable Lid Clamps which allow you to dial in the tension for a better seal. If you're struggling to get an airtight seal when using the Distillation Lid or Steam Condenser Set, these clamps can help provide more tension. Compatible with Gen 3 / Gen 4 BrewZillas. You Might Also Need: 65L Extended Malt Pipe 65L Wire Support Ring Recirculation Arm Extension KegLand Part Number: KL22248
This is an extension that fits onto the Blichmann 55 Gallon BoilerMaker kettles. It has the G2 finish, matching their newest line of kettles. Using this extension, the 55 gallon BoilerMaker nearly doubles its volume to top out at slightly over 100 gallons! Comes with a gasket for a watertight seal between the BoilerMaker Kettle and its Extension. The extension comes with a sight gauge marked up to 100 gallons, and the original lid for your BoilerMaker will fit right on top.
This is designed for 2 BBL batches, and is a great option for someone who wants to expand capacity without starting over with a new Brew Stand and set of kettles!
We've found that using a StarSan solution around the gasket / 55 gallon kettle top helps to get the extension into the kettle.
NOTE - Does not come with 55 Gallon Kettle in picture. This is just for the extension (top half). You will also need the Extension Removal tool to use this unit.
10° L - Briess Malting - European-style Munich Malt with a clean, malty flavor. The flavor profile can be described as very smooth and malty sweet. Golden in color leaning towards an orange hue.
125 unusual recipes using herbs, fruits, flowers, and more. As the book says, "Make extraordinary homemade wines from everything but grapes." As we say at the shop the ultimate book when you want to ferment your yard.
Great deal! Get Bootleg Biology’s Wild Yeast Agar Blend and 3 sets (30 plates) of sterile petri dishes.
Pickup this combo and make enough agar plates to go crazy streaking, isolating wild yeast AND brewer’s yeast!
Petri dishes are 90mm size, larger than 60mm dishes included in Yeast Wrangling Tool Kit…increasing the ease of isolating a colony on the first try.
Make truly unique beer by fermenting with your very own local yeast. With Bootleg Biology’s Backyard Yeast Wrangling Tool Kit you can capture wild yeast by simply stepping outside. The kit includes everything the experimental homebrewer needs to capture wild bugs, create agar plates, and isolate yeast.
Includes:
Detailed instruction book & web-based content
Half-gallon capture vessel
Bug membrane systems
Sterile cotton swabs
Test tubes
Pipettes
Bootleg Biology’s Wild Yeast Agar blend
Sterile petri dishes
ParaFilm
Bootleg Biology Fermetrics™ stickers
The famous Bootleg inoculation loop (a paper clip)
Also includes a Free Local Yeast Project Contributor pack! Once you’ve isolated a strain, becoming a Contributor is as simple as sticking a cultured swab in the included envelope and dropping it in a mailbox. Postage is pre-paid in the U.S.! As an added bonus: If you send your viable local yeast culture to Bootleg Biology, it will be banked in their laboratory freezer! You won’t ever have to worry about losing your fantastic local yeast culture.
This Graduated Cylinder is made from the same laboratory borosilicate glass as our Erlenmeyer Flasks. They have a volume of 250 mL with 2 mL graduations for accurate measurements.
Perfect for hydrometers / alcometers and testing the clarity of your beverage.
KegLand Part Number: KL04046
Keeping your equipment clean and sanitary is the first step toward brewing a fantastic beer, and making sure the bottles that will hold your creation are free from contamination is just as important. With so many products to choose from, it can be difficult for novice brewers to know what cleaning agents and equipment they need. We put together this simple kit to remove the grime and the guesswork. Star San Star San is an acid based sanitizer that is quick, odorless, tasteless and safe for most materials except softer metals. Use of 1 oz per 5 gallons of water and a contact time of 1 minute makes Star San very economical and convenient. Craft Meister Alkaline Brewery Wash Does your cleaner power through dirt in cold water? Craft Meister Alkaline Brewery Wash does! This versatile and powerful brewery cleaner dissolves quickly and cleans rapidly in cold water in addition to hot water. Ideal for overnight soaking as the solution does not lose effectiveness over time like oxygen based cleaners such as Oxi Clean. Craft Meister Alkaline Brewery Wash will not leave a white chalky film on your equipment like most oxygen based cleaners and rinses away with ease. Stainless Steel Bottle Washer Clean out dirty bottles with ease. Our stainless bottle washer creates a jet-style stream that penetrates build-up in bottles or carboys. It is automatically activated when a bottle is pressed down onto the unit. Female hose thread connection. Sink Faucet Adapter Allows you to hook up the Bottle Washer (mentioned above) to most kitchen sink faucets. Converts female or male fine-thread to male hose-thread. You simply unscrew the screen assembly at the end of your faucet and screw this adapter in its place. The plastic end attaches to your faucet, and the chrome end attaches to the Bottle Washer. Bottle Cleaning Brush This traditional design Beer Bottle Brush, is perfect for cleaning 12 to 22oz beer bottles. If there is any stuck-on residue or dust in the bottom of your bottles the rounded end of the brush will reach in and scrub it out! Includes circular metal loop for hanging. White Scrub & Scouring Pads (3 pack) You clean your equipment to remove bacteria. Make sure the tool you’re doing it with doesn’t leave scratches that actually promote bacterial growth !These pads are made of soft, woven fibers making them ideal for equipment cleaning. They are tough enough to scrub off scum and debris without scratching most surfaces. These scrubbers are the best choice for cleaning stainless steel. Also good for chrome, copper, porcelain, glass, and plastic! Plastic Syringe This plastic syringe is perfect for measuring out small amounts of liquid. Star San is so concentrated that the dilution rate is only 1 ounce per 5 gallons of water. This can be done with ease thanks to the volume markers on the Star San bottle, but what about when you want to make a mini batch of sanitizer? That's where the Plastic Syringe shines. Add a precise amount of Star San to whatever volume of water you see fit. Spray Bottle A bucket full of sanitizer is great for soaking equipment, but not every job requires that much solution. This 8 oz Sanitizing Spray Bottle is the answer! Great for a quick spray on hands, fermenter valves, sample takers, etc. either before or immediately after use. Add 1/2 tsp (2 ml) of Star San and fill with water. Sanitizer will last up to 1 week before it is ineffective. Kit Includes: Star San - 16 oz (CL26E) Alkaline Brewery Wash - 1 lb (CL41A) Stainless Steel Bottle Washer (CE10) Sink Faucet Adapter (CE21S) Bottle Cleaning Brush (CE30) White Scrub Pads - 3 count (CE27) Plastic Syringe - 10 ml (MT118) Spray Bottle - 8 oz (CE96)
Add convenience and reduce the mess of bottling with this bottling wand! Say goodbye to the days of just running a tube from your bottling bucket's spigot into the bottom of the bottle. A bottling wand starts its flow when you press the wand tip against the bottom of the bottle, and stops when you lower the bottle away from it. No more having to fiddle with the spigot during bottling, and no more mess from the dripping hose between bottles! What does this bottle filler have that the rest don't? A removable tip and spring that make this model easy to sanitize. Plus, the nozzle spring can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12 inches long. The plastic end fits nicely into our FE346spigot, or it can be removed to attach 3/8" ID tubing.
What does this bottle filler have that the rest don't? A removable tip and spring that make this model easily sanitized. Plus, the spring inside can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12 inches long.
What does this bottle filler have that the rest don't? A removable tip and spring that make this model easily sanitized. Plus, the spring inside can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12" long.
Create your own custom labels for your special homemade wines! With these unprinted sheets of adhesive labels you can easily create your own custom wine labels. The pre-cut labels come on 8-1/2 x 11"" sheets. You can download printing templates that will define the edges of the labels (as a table) so you can make your custom design fit the label. Once you’ve created your own design you print the labels with either inkjet or laser printer. The special adhesive will stay on while wet and during aging, but can easily be peeled off for reusing bottles. Wine labels come 4 per sheet, 8 sheets per pack, for a total of 32 labels. Blank templates for download:
MS Word (.doc) PDF (.pdf)
Bottle Sealing Wax is a sealing wax for any type of wine, liquor or bottled liquid. In all applications, Bottle Sealing Wax provides a tough, moisture resistant coating, which preserves freshness, flavor and fragrance. Bottle Sealing Wax adheres on both natural and synthetic corks. It provides tamper evident protection for your product. Bottle Sealing Wax can be applied by capping the top of the recessed cork or by dipping the corked bottle into the wax. Wax beads are easier to measure and melt than wax blocks.
Sold in 1 pound bags and 50 pound boxes. 1 pound will cover approximately 30 bottles, depending on usage.
DIPPING INSTRUCTIONS: The wax should be melted in a double boiled or crock pot. Maintain wax temperature at 180°F to 190°F. The ideal temperature may vary, depending on ambient temperature and humidity as well as the temperature of the bottle and cork.
Invert the bottle and carefully lower the cork end into the melted wax to the desired depth. Leave the top immersed for 10 to 15 seconds. Carefully lift bottle straight up and allow the excess wax to run off the inverted bottle top. When excess wax slows or stops, turn bottle upright and allow to cool.
Bottle Sealing Wax is a sealing wax for any type of wine, liquor or bottled liquid. In all applications, Bottle Sealing Wax provides a tough, moisture resistant coating, which preserves freshness, flavor and fragrance. Bottle Sealing Wax adheres on both natural and synthetic corks. It provides tamper evident protection for your product. Bottle Sealing Wax can be applied by capping the top of the recessed cork or by dipping the corked bottle into the wax. Wax beads are easier to measure and melt than wax blocks.
Sold in 1 pound bags and 50 pound boxes. 1 pound will cover approximately 30 bottles, depending on usage.
DIPPING INSTRUCTIONS: The wax should be melted in a double boiled or crock pot. Maintain wax temperature at 180°F to 190°F. The ideal temperature may vary, depending on ambient temperature and humidity as well as the temperature of the bottle and cork.
Invert the bottle and carefully lower the cork end into the melted wax to the desired depth. Leave the top immersed for 10 to 15 seconds. Carefully lift bottle straight up and allow the excess wax to run off the inverted bottle top. When excess wax slows or stops, turn bottle upright and allow to cool.
Bottle Sealing Wax is a sealing wax for any type of wine, liquor or bottled liquid. In all applications, Bottle Sealing Wax provides a tough, moisture resistant coating, which preserves freshness, flavor and fragrance. Bottle Sealing Wax adheres on both natural and synthetic corks. It provides tamper evident protection for your product. Bottle Sealing Wax can be applied by capping the top of the recessed cork or by dipping the corked bottle into the wax. Wax beads are easier to measure and melt than wax blocks.
Sold in 1 pound bags and 50 pound boxes. 1 pound will cover approximately 30 bottles, depending on usage.
DIPPING INSTRUCTIONS: The wax should be melted in a double boiled or crock pot. Maintain wax temperature at 180°F to 190°F. The ideal temperature may vary, depending on ambient temperature and humidity as well as the temperature of the bottle and cork.
Invert the bottle and carefully lower the cork end into the melted wax to the desired depth. Leave the top immersed for 10 to 15 seconds. Carefully lift bottle straight up and allow the excess wax to run off the inverted bottle top. When excess wax slows or stops, turn bottle upright and allow to cool.
Bottle Sealing Wax is a sealing wax for any type of wine, liquor or bottled liquid. In all applications, Bottle Sealing Wax provides a tough, moisture resistant coating, which preserves freshness, flavor and fragrance. Bottle Sealing Wax adheres on both natural and synthetic corks. It provides tamper evident protection for your product. Bottle Sealing Wax can be applied by capping the top of the recessed cork or by dipping the corked bottle into the wax. Wax beads are easier to measure and melt than wax blocks.
Sold in 1 pound bags and 50 pound boxes. 1 pound will cover approximately 30 bottles, depending on usage.
DIPPING INSTRUCTIONS: The wax should be melted in a double boiled or crock pot. Maintain wax temperature at 180°F to 190°F. The ideal temperature may vary, depending on ambient temperature and humidity as well as the temperature of the bottle and cork.
Invert the bottle and carefully lower the cork end into the melted wax to the desired depth. Leave the top immersed for 10 to 15 seconds. Carefully lift bottle straight up and allow the excess wax to run off the inverted bottle top. When excess wax slows or stops, turn bottle upright and allow to cool.
Due to high demand, the 50 lb is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Bottle Sealing Wax is a sealing wax for any type of wine, liquor or bottled liquid. In all applications, Bottle Sealing Wax provides a tough, moisture resistant coating, which preserves freshness, flavor and fragrance. Bottle Sealing Wax adheres on both natural and synthetic corks. It provides tamper evident protection for your product. Bottle Sealing Wax can be applied by capping the top of the recessed cork or by dipping the corked bottle into the wax. Wax beads are easier to measure and melt than wax blocks.
Sold in 1 pound bags and 50 pound boxes. 1 pound will cover approximately 30 bottles, depending on usage.
DIPPING INSTRUCTIONS: The wax should be melted in a double boiled or crock pot. Maintain wax temperature at 180°F to 190°F. The ideal temperature may vary, depending on ambient temperature and humidity as well as the temperature of the bottle and cork.
Invert the bottle and carefully lower the cork end into the melted wax to the desired depth. Leave the top immersed for 10 to 15 seconds. Carefully lift bottle straight up and allow the excess wax to run off the inverted bottle top. When excess wax slows or stops, turn bottle upright and allow to cool.
Bottle Sealing Wax is a sealing wax for any type of wine, liquor or bottled liquid. In all applications, Bottle Sealing Wax provides a tough, moisture resistant coating, which preserves freshness, flavor and fragrance. Bottle Sealing Wax adheres on both natural and synthetic corks. It provides tamper evident protection for your product. Bottle Sealing Wax can be applied by capping the top of the recessed cork or by dipping the corked bottle into the wax. Wax beads are easier to measure and melt than wax blocks.
Sold in 1 pound bags and 50 pound boxes. 1 pound will cover approximately 30 bottles, depending on usage.
DIPPING INSTRUCTIONS: The wax should be melted in a double boiled or crock pot. Maintain wax temperature at 180°F to 190°F. The ideal temperature may vary, depending on ambient temperature and humidity as well as the temperature of the bottle and cork.
Invert the bottle and carefully lower the cork end into the melted wax to the desired depth. Leave the top immersed for 10 to 15 seconds. Carefully lift bottle straight up and allow the excess wax to run off the inverted bottle top. When excess wax slows or stops, turn bottle upright and allow to cool.
Bottle Sealing Wax is a sealing wax for any type of wine, liquor or bottled liquid. In all applications, Bottle Sealing Wax provides a tough, moisture resistant coating, which preserves freshness, flavor and fragrance. Bottle Sealing Wax adheres on both natural and synthetic corks. It provides tamper evident protection for your product. Bottle Sealing Wax can be applied by capping the top of the recessed cork or by dipping the corked bottle into the wax. Wax beads are easier to measure and melt than wax blocks.
Sold in 1 pound bags and 50 pound boxes. 1 pound will cover approximately 30 bottles, depending on usage.
DIPPING INSTRUCTIONS: The wax should be melted in a double boiled or crock pot. Maintain wax temperature at 180°F to 190°F. The ideal temperature may vary, depending on ambient temperature and humidity as well as the temperature of the bottle and cork.
Invert the bottle and carefully lower the cork end into the melted wax to the desired depth. Leave the top immersed for 10 to 15 seconds. Carefully lift bottle straight up and allow the excess wax to run off the inverted bottle top. When excess wax slows or stops, turn bottle upright and allow to cool.
If you're filling bottles with a larger inner diameter at the neck than standard wine bottles, these bottle seating cones and be used to fill the gap and create the propper seal. Compatible with EnoItalia Professional Bottle Fillers.
WE670
WE680
WE643
WE686
Tapers from 3.375" to 1.25".
Replacement Seal for the main shaft of the fill spout on our WE644 and WE645 Professional Gravity Fillers. This is the cone that the bottle seats against to seal the system during filling.(~.5" to 1.5" tapered)
hole diameter = 14mm
Scrub your beer bottles clean with this bottle-shaped brush. Soak bottles in your preferred cleaning solution, scrub the inside with the bottle washing brush, and rinse.
17.5" long. Bristle section is 12" long.
Kegland Part number: KL12997
VintageSeal bottle wax alternative is a pliable, hybrid compound that is applied to the top of your best bottles for an Old World, hand-applied, wax-like appeal. Unlike wax, Vintage Seal bottle wax alternative does not chip and can be easily removed by hand without a knife or tool of any sort! Complete application instructions for our VintageSeal bottle wax alternative can be found here! One Pound of Vintage Seal will cover 30-40 bottles. Please note: some users find VintageSeal to be quite odorous. This is normal, and not an indication of defective or expired product.
VintageSeal bottle wax alternative is a pliable, hybrid compound that is applied to the top of your best bottles for an Old World, hand-applied, wax-like appeal. Unlike wax, Vintage Seal bottle wax alternative does not chip and can be easily removed by hand without a knife or tool of any sort! Complete application instructions for our VintageSeal bottle wax alternative can be found here! One Pound of VintageSeal will cover 30-40 bottles. Please note: some users find VintageSeal to be quite odorous. This is normal, and not an indication of defective or expired product.
VintageSeal bottle wax alternative is a pliable, hybrid compound that is applied to the top of your best bottles for an Old World, hand-applied, wax-like appeal. Unlike wax, Vintage Seal bottle wax alternative does not chip and can be easily removed by hand without a knife or tool of any sort! Complete application instructions for our VintageSeal bottle wax alternative can be found here! One Pound of VintageSeal will cover 30-40 bottles. Please note: some users find VintageSeal to be quite odorous. This is normal, and not an indication of defective or expired product.
VintageSeal bottle wax alternative is a pliable, hybrid compound that is applied to the top of your best bottles for an Old World, hand-applied, wax-like appeal. Unlike wax, Vintage Seal bottle wax alternative does not chip and can be easily removed by hand without a knife or tool of any sort! Complete application instructions for our VintageSeal bottle wax alternative can be found here! One Pound of VintageSeal will cover 30-40 bottles. Please note: some users find VintageSeal to be quite odorous. This is normal, and not an indication of defective or expired product.
VintageSeal bottle wax alternative is a pliable, hybrid compound that is applied to the top of your best bottles for an Old World, hand-applied, wax-like appeal. Unlike wax, Vintage Seal bottle wax alternative does not chip and can be easily removed by hand without a knife or tool of any sort! Complete application instructions for our VintageSeal bottle wax alternative can be found here! One Pound of VintageSeal will cover 30-40 bottles. Please note: some users find VintageSeal to be quite odorous. This is normal, and not an indication of defective or expired product.
VintageSeal bottle wax alternative is a pliable, hybrid compound that is applied to the top of your best bottles for an Old World, hand-applied, wax-like appeal. Unlike wax, Vintage Seal bottle wax alternative does not chip and can be easily removed by hand without a knife or tool of any sort! Complete application instructions for our VintageSeal bottle wax alternative can be found here! One Pound of VintageSeal will cover 30-40 bottles. Please note: some users find VintageSeal to be quite odorous. This is normal, and not an indication of defective or expired product.
Inspired by Founders Kentucky Breakfast Stout®, this kit combines our All Out Brunch Stout recipe with an addition of bourbon-soaked oak chips
Includes Nugget and Willamette hops
Estimated ABV: 7.5%
Estimated IBUs: 60
Makes 5 gallons of finished beer
Bourbon Belle takes the beautifully complex flavor of Brunch Stout and adds a charming southern drawl. Similar to "All Out", this recipe combines a variety of dark malts, cacao nibs, and ground coffee for a remarakably rich flavor profile, and then adds a little giddy-up with an addition of bourbon-soaked oak chips. The oak chips are added to simulate the barrel-aging process used for making Founders Kentucky Breakfast Stout®, or "KBS". You wouldn't expect a foal to win the Triple-Crown, so practice patience when brewing Bourbon Belle. We recommend a conditioning period of 2 to 6 months to allow this beer to fully mature before entering the race.
Please note: this recipe calls for 2 oz of Kona and Sumatra coffee grounds and 1 cup of Kentucky Bourbon, which are not included in the kit.
Makes 5 gallons
Estimated Original Gravity: 1.078
SRM (Color Range): 40+
IBUs: 60
Estimated Alcohol Percentage: 7.5%
Oak Chips Included
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Inspired by Founders Kentucky Breakfast Stout®, this kit combines our All Out Brunch Stout recipe with an addition of bourbon-soaked oak chips
Includes Nugget and Willamette hops
Estimated ABV: 7.5%
Estimated IBUs: 60
Makes 5 gallons of finished beer
Bourbon Belle takes the beautifully complex flavor of Brunch Stout and adds a charming southern drawl. Similar to "All Out", this recipe combines a variety of dark malts, cacao nibs, and ground coffee for a remarakably rich flavor profile, and then adds a little giddy-up with an addition of bourbon-soaked oak chips. The oak chips are added to simulate the barrel-aging process used for making Founders Kentucky Breakfast Stout®, or "KBS". You wouldn't expect a foal to win the Triple-Crown, so practice patience when brewing Bourbon Belle. We recommend a conditioning period of 2 to 6 months to allow this beer to fully mature before entering the race.
Please note: this recipe calls for 2 oz of Kona and Sumatra coffee grounds and 1 cup of Kentucky Bourbon, which are not included in the kit.
Makes 5 gallons
Estimated Original Gravity: 1.078
SRM (Color Range): 40+
IBUs: 60
Estimated Alcohol Percentage: 7.5%
Oak Chips Included
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
This is the automatic pressure relief valve for the bottom assembly on all Speidel bladder presses. This valve prevents you from over-pressurizing the bladder and rupturing it.
