Need to de-gas a carboy full of wine? Say goodbye to swirling your wine for 10 minutes by hand! “The Whip” Wine Degasser will have it done in no time!
De-gas your wines quickly and easily with this lightweight, drill mounted degassing rod for wines. It features a plastic shaft with an offset ""hook"" for quickly degassing wines.
To use, mount the sanitized degassing rod on an electric drill. Insert through the neck of the carboy, and the slowly increase the speed of the drill. Reduce the speed or stop as the bubbles come out of solution. As the bubbles subside, you can begin again. Repeat until large amount of bubbles stop coming out of solution. Take care to keep the spinning wings submerged, you do not want to agitate the surface of the wine and oxidize it.
Lightweight inexpensive no more swirling for 10 minutes by hand!
This carboy thermowell is used in conjunction with the Digital Controller, FE601A, FE610A, or FE602, to more accurately regulate internal temperature during fermentation. It is exceptionally useful during the start of fermentation when the lag between ambient temperature in the refrigerator and actual temperature in the carboy can vary greatly. Now you can keep your beer or wine within one degree of the set point on your digital controller. Designed to fit either 3, 5 or 6 gallon PLASTIC carboys or any other similarly sized opening hole. The unit comes with a 15" stainless steel thermowell and a #10 silicone stopper that will accommodate our sanitary filter, FIL90, as well. It can be used in any container with a stopper opening of this size where you need to accurately monitor and control liquid temperature. Will not work with Johnson Temperature Controllers (FE60 or FE61) because the probes are too large. Need a thermowell for a glass carboy? See related product. Inner Diameter of Thermowell: .255" Works with new 2016 Rancos
#8 stopper - solid. Top diameter 1.59 inches (40.5 mm), bottom diameter 1.31 inches (33 mm), length 1 inch (25 mm).
BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet.
To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole.
Max. Temperature Rating: 158 °F (70 °C).
This 1 Gallon Starter Kit is the the easiest way to get started homebrewing!
Our Homebrew Starter Kit leverages your existing 2 gallon pot to make 1 gallon (about ten 12 oz bottles) of craft beer right in your kitchen in just a few hours!
Our thoughtfully crafted Ingredient Refill Kits include everything you need for your batch, from grain bag to bottle caps. Unlike some other manufacturers there are no costly add-on packages needed to complete the brewing process. Our recipes span a wide range of classic and modern beer styles, you’re not limited to only very bland or very esoteric recipe choices. One thing they do share, though, is our decades of experience in brewing and crafting world-class beers; experience we’re now sharing directly with you!
If you’ve ever thought about brewing your own beer at home, there’s no reason to hesitate any further. This is the starter kit you’ve been waiting for.
Equipment Kit Contents
Wide Mouth, Easy-To-Clean 1 Gallon Fermenter Jar
Fermenter Jar Lid w/ 3-Piece Airlock
Mini Auto-Siphon makes transfers a breeze
Food-Grade Transfer Tubing
Premium Bottle Filling Wand
Bottle Capper
Sanitizer Concentrate
American IPA Recipe Kit (see below for more info)
American IPA
This India Pale Ale features the clean bitterness of Magnum hops and healthy dose of the flavors and aromas of Cascade: arguably the hop behind the modern craft beer movement.
Color/Body: Amber/Medium
Bitterness: Very High
Estimated Alcohol: 6%
Plus, EVERY Brewmaster Beer Ingredient Refill Kit comes complete with everything you need for your next batch of beer, including:
Specialty Steeping Grains
Fermentable Malt Extract
Brewer’s Hops
Brewer’s Yeast
Disposable Grain Bag (for recipes w/ steeping grains only)
Carbonation Drops
Bottle Caps
*Note: You will need to save up or purchase 10-12 12oz PRY-OFF (not twist-off) beer bottles.
This 1 Gallon Starter Kit is the the easiest way to get started homebrewing!
Our Homebrew Starter Kit leverages your existing 2 gallon pot to make 1 gallon (about ten 12 oz bottles) of craft beer right in your kitchen in just a few hours!
Our thoughtfully crafted Ingredient Refill Kits include everything you need for your batch, from grain bag to bottle caps. Unlike some other manufacturers there are no costly add-on packages needed to complete the brewing process. Our recipes span a wide range of classic and modern beer styles, you’re not limited to only very bland or very esoteric recipe choices. One thing they do share, though, is our decades of experience in brewing and crafting world-class beers; experience we’re now sharing directly with you!
If you’ve ever thought about brewing your own beer at home, there’s no reason to hesitate any further. This is the starter kit you’ve been waiting for.
Equipment Kit Contents
Wide Mouth, Easy-To-Clean 1 Gallon Fermenter Jar
Fermenter Jar Lid w/ 3-Piece Airlock
Mini Auto-Siphon makes transfers a breeze
Food-Grade Transfer Tubing
Premium Bottle Filling Wand
Bottle Capper
Sanitizer Concentrate
Irish Red Ale Recipe Kit (see below for more info)
Irish Red Ale
Medium bodied, beautiful red color, and toasty, graham cracker malt character. Where Helen’s was the face that launched 1,000 ships, this is the beer that’s launched thousands of homebrewing careers. One of our all time best-selling recipes--one sip and you’ll understand why!
Color/Body: Red/Medium
Bitterness: Medium
Estimated Alcohol: 4.5%
Plus, EVERY Brewmaster Beer Ingredient Refill Kit comes complete with everything you need for your next batch of beer, including:
Specialty Steeping Grains
Fermentable Malt Extract
Brewer’s Hops
Brewer’s Yeast
Disposable Grain Bag (for recipes w/ steeping grains only)
Carbonation Drops
Bottle Caps
*Note: You will need to save up or purchase 10-12 12oz PRY-OFF (not twist-off) beer bottles.
This 1 Gallon Starter Kit is the the easiest way to get started homebrewing!
Our Homebrew Starter Kit leverages your existing 2 gallon pot to make 1 gallon (about ten 12 oz bottles) of craft beer right in your kitchen in just a few hours!
Our thoughtfully crafted Ingredient Refill Kits include everything you need for your batch, from grain bag to bottle caps. Unlike some other manufacturers there are no costly add-on packages needed to complete the brewing process. Our recipes span a wide range of classic and modern beer styles, you’re not limited to only very bland or very esoteric recipe choices. One thing they do share, though, is our decades of experience in brewing and crafting world-class beers; experience we’re now sharing directly with you!
If you’ve ever thought about brewing your own beer at home, there’s no reason to hesitate any further. This is the starter kit you’ve been waiting for.
Equipment Kit Contents
Wide Mouth, Easy-To-Clean 1 Gallon Fermenter Jar
Fermenter Jar Lid w/ 3-Piece Airlock
Mini Auto-Siphon makes transfers a breeze
Food-Grade Transfer Tubing
Premium Bottle Filling Wand
Bottle Capper
Sanitizer Concentrate
Summer Wheat Recipe Kit (see below for more info)
Summer Wheat Recipe Kit
A mild, low-bitterness, smooth beer for easy, frequent drinking. The perfect summer time thirst quencher! Because of it’s clean, mild profile, this beer is an excellent candidate for incorporating fruit extracts, flavorings or other ingredients to customize your brew!
Color/Body: Blond/Light
Bitterness: Low
Estimated Alcohol: 3.8%
Plus, EVERY Brewmaster Beer Ingredient Refill Kit comes complete with everything you need for your next batch of beer, including:
Specialty Steeping Grains
Fermentable Malt Extract
Brewer’s Hops
Brewer’s Yeast
Disposable Grain Bag (for recipes w/ steeping grains only)
Carbonation Drops
Bottle Caps
*Note: You will need to save up or purchase 10-12 12oz PRY-OFF (not twist-off) beer bottles.
Wide mouth plastic tub in "natural" opaque white color. Opening is 110 mm wide. Lids are sold separately, see item JAR01A. Holds 1 gallon, or 12 pounds of liquid malt extract (LME).
Sold individually, packed in cases of 4. 192 each per pallet.
This fitting allows you to change a 1.5 in. TC to a 1/4 in. flare. The 1/4 in. flare is compatible with a standard swivel nut for draft lines making it an easy way to transfer to kegs!
Tri-clamp racking arm adapter for 7, 14, and 1/2 BBL Chronical Conicals.
Features:
304 Stainless Steel construction
For those of you who want threadless/ TC fittings
Custom designed for Chronical series fermenters!
Use with 1.5" TC butterfly valve of your choice
Stainless steel dial thermometer with 1.5" tri-clamp fitting. Thermometer face measures 3.25" and measures from 32-220°F (0-100°C). Probe measures 7.5" in length from the tip to the T.C. fitting.
Convert 1.5" Tri-Clamp to 1.5" Barb for connection of 1.5" ID tubing. 304-type stainless steel. 4.5" long stem. This long barb is the perfect TC fitting for banded brewery hoses.
Wide mouth plastic tub in "natural" opaque white color. Opening is 110 mm wide. Lids are sold separately, see item JAR01A. Holds 1/2 gallon, or 6 pounds of liquid malt extract (LME).
Sold individually, packed in cases of 6. 360 each per pallet.
An adjustable thermometer is perfect for any brewer with a kettle setup that doesn't have the thermometer port at eye-level. Tilt the face upwards to avoid having to bend and crouch to check temp readings. Made from 304 stainless steel.
Angle adjustable connection
3” Dial face
Waterproof
Range: 0-220°F
1/2" MPT
With 1/2" MPT threads, the Brewmaster dial thermometer is ready to be easily installed on most kettles, mash tuns, and hot liquor tanks. More low profile than it's bigger brother, this unit has a 2" face and 1.875" probe. Measures from 0–220°F. Made from 304 stainless steel.
2” Dial face
Waterproof
Range: 0-220°F
1/2" MPT
With 1/2" MPT threads, the Brewmaster dial thermometer is ready to be easily installed on most kettles, mash tuns, and hot liquor tanks. The 2" probe takes accurate readings while staying out of the way. Large 3" face is easy to read. Measures from 0–220°F. Made from 304 stainless steel.
3” Dial face
Waterproof
Range: 0-220°F
1/2" MPT
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Fill at a local welding shop or swap out for a full tank at your local homebrew shop
Made from high-quality aluminum that will never rust like steel tanks
Dispense 18 x five-gallon kegs of homebrew
Go with the larger 10 lb CO2 tank and extend the time between needing to refill or swap for a full tank
This brand new, 10 lb aluminum CO2 tank ships free in the 48 contigous states, and because it is made of aluminum rather than steel you can feel confident that it will never rust. It’s called a 10 lb tank because it holds 10 lb of compressed (liquified) CO2. 10 lb of CO2 is enough to dispense 18 five gallon kegs of homebrew.
All new CO2 tanks are shipped empty and will require either filling or exchanging for a full tank. Most local homebrew shops will stock gas to exchange, and many local welding supply companies can fill tanks on site.
Dimensions: 20.75" Tall x 7" wide.
NOTE: CO2 tanks should always be stored in an upright position.
When you want a precise measurement this glass graduated cylinder is the ticket! Graduated cylinders are a more accurate measuring device than Erlenmeyer Flasks, so when precision is needed this is the tool for the job.
With the accurate, easy to read markings on this 100 ml Graduated Cylinder, you can measure and dilute liquids with accuracy and ease! This cylinder is class-A, lab quality. It’s designed to deliver accurate measurements while remaining resistant to breakage and a wide range of chemicals. Includes a plastic volume marker. Suitable for all general lab work.
Approx 9" tall.
Speidel has developed a stainless steel fermenting egg that combines the advantages of the egg shape with the advantages of a stainless steel tank and a unique design. The Black Eye looks like a space satellite from the outside and provides a gentle and well controllable fermentation inside. Due to its unique shape, the yeast can circulate smoothly during the fermentation phase. In science it is assumed that this free circulation is an advantage for the fermentation process and thus for the entire aroma spectrum. Thanks to the perfect welding seams and the highly smooth inner walls, the fermenting chamber is also very easy to clean.
Tank shell and tank bottom made of AISI304 stainless steel, surface IIId (2R), marbled outside
Tank top made of AISI316 stainless steel, surface IIId (2R), marbled outside
DOM NW400 centered in the middle og the tank top with flap lid with venting nozzle 2''TC
Free-standing base tank on three welded-on legs
Sampling - Weld-on thread NW10 DIN11851 with sealing cap (for the installation of sampling tap)
Racking Outlet - Weld-on 1.5''TC
Cooling Jacket - Laser-welded double jacket for cooling with two 1" BSP male threaded ports
Temperature Measurement - Weld-on thread NW10 DIN11851
Bottom Outlet - Vaulted, stable tank bottom, in bottom centre with forward drawn discharge pipe and outlet with 1.5''TC
Speidel has developed a stainless steel fermenting egg that combines the advantages of the egg shape with the advantages of a stainless steel tank and a unique design. The Black Eye looks like a space satellite from the outside and provides a gentle and well controllable fermentation inside. Due to its unique shape, the yeast can circulate smoothly during the fermentation phase. In science it is assumed that this free circulation is an advantage for the fermentation process and thus for the entire aroma spectrum. Thanks to the perfect welding seams and the highly smooth inner walls, the fermenting chamber is also very easy to clean.
Tank shell and tank bottom made of AISI304 stainless steel, surface IIId (2R), marbled outside
Tank top made of AISI316 stainless steel, surface IIId (2R), marbled outside
DOM NW400 centered in the middle og the tank top with flap lid with venting nozzle 2''TC
Free-standing base tank on three welded-on legs
Sampling - Weld-on thread NW10 DIN11851 with sealing cap (for the installation of sampling tap)
Racking Outlet - Weld-on 2''TC
Cooling Jacket - Laser-welded double jacket for cooling with two 1" BSP male threaded ports
Temperature Measurement - Weld-on thread NW10 DIN11851
Bottom Outlet - Vaulted, stable tank bottom, in bottom centre with forward drawn discharge pipe and outlet with 2''TC
Speidel's RO-Z style grant/mixing tank is an extremely handy tool in any winery. The open top, 45° mixing port with 1.5''TC, and total drain outlet 1.5''TC make mixing additions into larger tanks a snap - insert your mixer in the 45° port and position the mixing tank under the racking port of your larger tank. Run wine into the mixing tank with the mixer running, pour in your tartaric acid, sugar, bentonite, etc.; and pump out of the drain port to return the wine to the tank.
Key Features
Heavy duty nylon casters make the tank easy to move around the winery
Two fixed casters and two swivelling casters with brakes
45° mixing port is reinforced and strong enough to support a mixer without an additional stand
Variable Volume tank lid available (sold separately)
Sack support rack available (sold separately)
View the resource for more information on the key features of all Speidel Tanks.
Replace a lost or broken collection ball for your 14 gallon FastFerment or just get an extra one to store more yeast! The collection ball is 40.6 oz (1200 ml) and made from food grade HDPE.
Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear
Half Barrel Keg holds 165x 12 oz beers or 124x 16 oz pints
Ideal for large-batch brewers where you want to clean and sanitize as few kegs as possible
Commercial quality construction—produced and tested in an ISO 9001 Certified facility
Supply your brewery with the best kegs on the market with these Full Size 15.5 gallon Half Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each 15.5 gal keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery.
Holds 165 x 12 oz beers (124 x 16 oz pints).
Features:
Full Size 15.5 gal (1/2 bbl) US Sanke keg
304 Stainless Steel Construction
23.25" Height, 16.8" Diameter
Produced in an ISO 9001 Certified Facility
Drop In spears produced by MicroMatic
Working pressure is 43.51 psi (3.0bar)
Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear
Half Barrel Keg holds 165x 12 oz beers or 124x 16 oz pints
Ideal for large-batch brewers where you want to clean and sanitize as few kegs as possible
Commercial quality construction—produced and tested in an ISO 9001 Certified facility
Supply your brewery with the best kegs on the market with these Full Size 15.5 gallon Half Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each 15.5 gal keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery.
Holds 165 x 12 oz beers (124 x 16 oz pints).
Features:
Full Size 15.5 gal (1/2 bbl) US Sanke keg
304 Stainless Steel Construction
23.25" Height, 16.8" Diameter
Produced in an ISO 9001 Certified Facility
Drop In spears produced by MicroMatic
Working pressure is 43.51 psi (3.0bar)
16g threaded CO2 cartridges that work great with the KegLand Core 360 Mini CO2 Regulator or the Duotight Mini CO2 Regulator. Comes in a package of 6 cartridges. Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.
Unthreaded cartridges can be used with handheld CO2 injectors, the 128 oz Growlerwerks uKeg, as well as some mini keg systems.
Unthreaded cartridges are not compatible with our mini CO2 regulators.
A perfect size, food-grade, bucket that is a perfect fermenter for doing 1 gallon fermentations. Ideal for your next small batch of homebrew or fruit wine. Also a great container to store grain in. Wide opening allows for easy cleaning.
Lid sold separately.
9-1/4" H x 9-1/2" D (without lid)
9-7/16" H x 9-15/16" D (with lid)
Grow your own 2-row malting barley next to your hops for a great aesthetic look, or learn to malt barley at home and grow all of your own beer ingredients right in your back yard!
The Small seed pack provides enough seed to grow over 50 square feet of barley. The Large seed pack has enough for over 250 square feet.
1.8° L - Briess Brewers 2-Row is a fantastic base malt that can be used for all beer styles. Briess 2-row contributes a clean, sweet, and slightly malty character along with a light straw color. Briess Brewers Malt is malted in Wisconsin in small batches and is an excellent fit for all ales. Use this the same as you would any 2 row base malt and expect amazing results in your glass. Briess is an American malting company that is vertically integrated with seed facilities, barley collection facilities, and direct relationships with farmers in the state of Wyoming. In this region malt is flood irrigated so that it does not have to rely on rainfall. This has the benefits of quality and consistency for you the brewer. Malt that is flood irrigated is lighter in color since the barley heads see very little rain. The flood irrigation is also consistent and reliable so Briess sees less variability in their malt from year to year. MoreBeer! visited the Briess malting facilities in Wisconsin and this is a true American company that is still privately held by the Briess family. The late Roger Briess was a huge supporter of homebrewing and attended and sponsored homebrewing events. Yes we like the malt and also the company! If this malt is currently out of stock or you'd like to try out a different maltster, please see the substitution chart below. Viking Malt - 2-Row Xtra Pale GR941 Great Western Malting - Premium 2-Row GR30 Rahr Malting - 2-Row GR304 Canada Malting - 2-Row GR642
1.9 L - Rahr - Rahr Malting Co - A great base malt from the Northwest made from Harrington and Metcalf barley grown in the USA and malted in Minnesota at the Rahr malt house. Well modified and perfect for single infusion mashes. Clean flavor with a nice, floral aroma with a sweet taste make Rahr 2-row a fast growing malt of choice for many commercial brewers. Try this in your next beer and see the difference. Example Malt Analysis Moisture, % 4.1 Extract %, finely ground malt, as is 81.3 Extract %, coarsley ground malt, as is 80.3 F/C Difference % 1.0 Color, laboratory Wort, degrees Lovibond 1.90 Viscosity 1.42 Beta Glucan, ppm 76 Diastatic Power 131 Alpha Amylase (DU) 54.0 Total Soluble Protein %, dry basis 4.68 Total Protein %, dry basis 11.16 S/T Ratio % 41.9 If this malt is currently out of stock or you'd like to try out a different maltster, please see the substitution chart below. Viking Malt - 2-Row Xtra Pale GR941 Great Western Malting - Premium 2-Row GR30 Briess Malting - Brewers 2-Row GR301 Canada Malting - 2-Row GR642
Experience the 3G Difference
Reduce Staling & Improve Shelf Life — A null-lox malt bred without lipoxygenase enzymes, preventing the oxidative reactions that cause staling. Reduced DMS — Contains up to 60% less S-methylmethionine (SMM), reducing DMS potential for cleaner flavor and enabling faster, more efficient boils. Amazing Flavor — Clean, crisp, and balanced. In blind tastings, brewers consistently preferred it to other 2-row base malts. Versatile — Highly modified for easy conversion and kilned like a pilsner malt for an extra-light 1.7–1.9 °L color, making it ideal for everything from lagers to hop-forward ales. Real innovation in base malt is rare. Viking 3G Xtra Pale represents a revolutionary step forward, engineered to give you a distinct advantage in quality, efficiency, and cost. This premium European malt uses naturally bred, null-LOX barley that actively prevents oxidative staling, keeping your beer fresher, longer. We’ve also engineered it with up to 60% less SMM (the precursor to DMS), ensuring a cleaner, purer flavor profile while enabling faster, more energy-efficient boils. The result? A superior, brewer-preferred malt that delivers the performance of a premium import at the price of a domestic. Stand out without driving up costs. 1.9 °L - Viking Malt - Xtra Pale is a modern 2-row base malt designed for very light-colored ales. While it works great as the base malt for any ale, it is particularly perfect for today’s extra light colored pale ales and IPAs. Xtra pale is germinated like a pale malt to have a high degree of modification for easy brew house conversion. However, it is then uniquely Kilned like a pilsner malt for a very light color in the 1.7 to 1.9 Lovibond range. The result is a malt that easily and quickly converts like a true pale ale malt, but is as light or lighter than most Pilsner malts. Morebeer! Pro worked with Viking to design this malt based on numerous customer requests. Unique light-colored barley varietals were chosen and the germination and kilning processes were selected to get the best of both worlds. Compared to other 2-row base malts on the market that were originally designed for big breweries, and are neither true Pilsner or true Pale Malts, Xtra Pale was specifically designed for light, craft-brewed ales. Malt Specification:
Moisture % - max. 4.5 Extract fine % dm - min. 81.3 Color °L - 1.9 Protein % dm - max. 10.1 Kolbach Index % - 44.4 Beta-glucan in wort (mg/l) - 185 Friability % - 87 Glassy grains % - 0.4 If this malt is currently out of stock or you'd like to try out a different maltster, please see the substitution chart below. Canada Malting - 2-Row GR642 Great Western Malting - Premium 2-Row GR30 Briess Malting - Brewers 2-Row GR301 Rahr Malting - 2-Row GR304
This awesome little fermenter is ideal for any fermentation, up to 2.5 gallons. The unit is designed to be an all in one fermenter and bottling bucket. The bowl shape at the base of the fermentor allows sediment to settle prior to bottling. The wide opening on top allows for easy cleaning, large direct additions of fruit, hops or other products and overall easier access. Cool beer stein styling makes this the freshest fermentor on the market!
Great for splitting 5 gallon batches into two separate fermentation to test yeast, different dry hops, add oak to one, etc.
Use this fermenter for your next batch of fruit wine, half batch of beer or any other fermentation! Holds roughly 2.9 gallons total; recommended for 2.5 gallon fermentations.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Replacement End Plate for your 20x20cm Plate & Frame filter
Pump side end plate pictured (WE912C). WE912D has nipple on one side, where WE912C is a flat circle on either side.
Individual Noryl plates, 20cm x 20cm, for adding to one of our existing plate filters. Each filter we sell lists the maximum number of plates that the filter can contain. These are made from heat resistant Noryl type plastic, allowing you to sterilize with steam if you choose.
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at 21st Amendment
An easy-drinking pale ale with few bittering hops but giant fistfuls of flavor and aroma hops
Includes Cascade, Liberty, and Willamette hops
Estimated ABV: 4.3%
Estimated IBUs: 33-41
Makes 5 gallons of finished beer
Shaun is known for creating beers that are well-balanced while doing some unique things, such as using watermelon juice in a wheat beer, or oyster shells in an oatmeal stout. His Assistant brewer Jesse created this beer, an easy-drinking pale ale with few bittering hops but giant fistfuls of flavor and aroma hops. This beer has low alcohol and a soft malt backbone with an incredible hop finish - your answer to the hop shortage! Jesse and Shaun recommend using WLP001.
Shaun O'Sullivan of the 21st Amendment, San Francisco, California
Shaun's brewing career started like most in the beer industry - homebrewing. While working at a Southern California law firm, Shaun was spending his time making beers at home. After about 2 years, he not only decided that he wanted to make beer for a living, but that he wanted to open his own place! Shaun moved up to the SF Bay Area to start working at a few local breweries, while taking several brewing courses at UC Davis. Shaun eventually teamed up with his business partner Nicco Freccia, and together, they founded the 21st Amendment Brewery and Restaurant. They are one of the few breweries in the country leading the craft beer canning revolution, canning their "Brew Free or Die" IPA, and their "Hell or High Watermelon", which is an American-style Wheat beer brewed with real watermelon juice. When in San Francisco, visit Shaun at the brewery (563 2nd Street), which is just two blocks from Giants park.
Makes 5 gallons
Estimated Original Gravity: 1.040-45
SRM (Color Range): 15
IBUs: 33-41
Estimated Alcohol Percentage: 4.3%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at 21st Amendment
An easy-drinking pale ale with few bittering hops but giant fistfuls of flavor and aroma hops
Includes Cascade, Liberty, and Willamette hops
Estimated ABV: 4.3%
Estimated IBUs: 33-41
Makes 5 gallons of finished beer
Shaun is known for creating beers that are well-balanced while doing some unique things, such as using watermelon juice in a wheat beer, or oyster shells in an oatmeal stout. His Assistant brewer Jesse created this beer, an easy-drinking pale ale with few bittering hops but giant fistfuls of flavor and aroma hops. This beer has low alcohol and a soft malt backbone with an incredible hop finish - your answer to the hop shortage! Jesse and Shaun recommend using WLP001.
Shaun O'Sullivan of the 21st Amendment, San Francisco, California
Shaun's brewing career started like most in the beer industry - homebrewing. While working at a Southern California law firm, Shaun was spending his time making beers at home. After about 2 years, he not only decided that he wanted to make beer for a living, but that he wanted to open his own place! Shaun moved up to the SF Bay Area to start working at a few local breweries, while taking several brewing courses at UC Davis. Shaun eventually teamed up with his business partner Nicco Freccia, and together, they founded the 21st Amendment Brewery and Restaurant. They are one of the few breweries in the country leading the craft beer canning revolution, canning their "Brew Free or Die" IPA, and their "Hell or High Watermelon", which is an American-style Wheat beer brewed with real watermelon juice. When in San Francisco, visit Shaun at the brewery (563 2nd Street), which is just two blocks from Giants park.
Makes 5 gallons
Estimated Original Gravity: 1.040-45
SRM (Color Range): 15
IBUs: 33-41
Estimated Alcohol Percentage: 4.3%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Imagine a brewing pump that eliminates cavitation, is easy to clean, has a built in valve, and is quiet. Introducing The RipTide pump from Blichmann, the first pump designed specifically for homebrewing.
We love this brew pump. Like a brewer wired on coffee, let us rattle off some of our favorite features. First, the pull style relief valve that allows air to exit the pump head so the impeller won't cavitate is a genius addition. Our next favorite feature is the bad-ass, built-in flow control valve so you don't have to add additional ball-valves. While we dont manually clean our pumps very often we like the idea that we can easily do that with the clover clamp style connection. That might be particularly important if you are transferring cool wort where extra sanitation might make a difference. Equally cool is the noise, or lack thereof, when operating. It just wears on you to hear your pump grinding away all day. The RipTide pump isn't silent, but it is much quieter. And to top it all off we like the mounting base and the extra long 3 m cord. 3 m gets the plug connection a few meters away from where we are brewing and less likely to be exposed to water - a simple upgrade that is really nice. Oh, and we almost forgot the power switch which is always a nice feature on something electric!
All in all this is a no brainer upgrade for the difference in cost.
Features:
Strong rare earth magnets and a curved blade impeller provide 22 L/M and up to 6.5M of pressure head!
Tri-Clamp head disassembles easily for cleaning
1/2" NPT inlet and outlet
Motor is enclosed in a splash proof and super quiet case
Rotatable stainless steel head
Integrated air release vent allows you to easily prime the pump everytime without those frustrating air bubbles and cavitation
Linear flow valve provided for excellent flow control
Power switch on base
3 m long power cord with 230V plug
Savvy homebrewers do what it takes to keep their gear functioning flawlessly!
If you have invested in the convenience of a Ercole Capper, give yourself the added security of having a spare 26 mm heavy duty capping head on hand.
This is a 304 stainless steel blow off tube for Ss Brewtech 1/2 barrel Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a relief valve built into the cane. 3" TC gasket and clamp not included.
