For you, The Discerning Kegger, these Perlick beer faucets are a thing of beauty. When you draw off a pint, they look good, operate smoothly, and don’t gum up. They are a breeze to take apart for sanitizing. These design benefits will have you sold on the lifetime value of these taps.
#1 Design Benefit - Forward Sealing
The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? In an ordinary, rear-sealing faucet, the entire faucet must drain out of beer. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain out. Because beer drains from the entire faucet the faucet remains sticky and is prone to contamination from the left over residue. The Perlick faucet, with its forward sealing design, only has beer drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination.
#2 Design Benefit - Stainless Steel
Standard old school faucets are made of brass that is plated in chrome. The chrome plating wears off and the Brass can pit. This can result in flavor contamination when your beer runs over exposed brass and pits which usually harbor bacteria.
In the late 90's, when the first stainless faucet was released, it cost close to $100. Wow. Now you can choose to get a traditional style faucet made out of stainless, but why would you bother when you can get this unique forward sealing design and stainless construction all in the same Perlick faucet?
Sure it costs a little more but you will never regret making the upgrade now.
The famous forward-sealing Perlick beer faucet, with the added feature of an integrated Flow Control valve!
Manage foaming issues when dispensing beer at home with this Perlick 650SS Beer Faucet with Flow Control. The new flow control feature makes it easy to reduce foaming no matter the type of beer line you’re using; leaving you with a nice, tall glass of crystal clear beer.
Constructed of 304 stainless steel to last a lifetime.
Buy two or more 650SS faucets from MoreBeer! and receive free shipping in the lower 48 states!
About Perlick Forward Sealing Beer Faucets:
The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? An ordinary, rear-sealing faucet closes by pushing a shuttle against the faucet shank, at the rear of the faucet. So once the tap is closed the faucet is still full of beer that has to be drained out. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain. Because of this design, leftover beer residue inside the faucet makes operation sticky and can harbor bacteria which harm your beer’s flavor as it flows through the faucet. In the Perlick faucet, with its Forward Sealing design, beer only has to drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination!.
The famous forward-sealing Perlick beer faucet, with integrated Flow Control valve and Push-Back Creamer!
Use the flow control feature to reduce unwanted foaming during the length of the pour, then finish it off with the push-back creamer to top off the beer with the perfect amount of foam. Get ready to start pouring picuture-perfect pints with the Perlick 690SS!
Constructed of 304 stainless steel to last a lifetime.
About Perlick Forward Sealing Beer Faucets:
The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? An ordinary, rear-sealing faucet closes by pushing a shuttle against the faucet shank, at the rear of the faucet. So once the tap is closed the faucet is still full of beer that has to be drained out. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain. Because of this design, leftover beer residue inside the faucet makes operation sticky and can harbor bacteria which harm your beer’s flavor as it flows through the faucet. In the Perlick faucet, with its Forward Sealing design, beer only has to drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination!.
Please note: In order for the push-back creamer to function properly, you must avoid overtightening the tap ferrule. If you're unable to push-back on the faucet lever, check that there's enough room between the tap ferrule and the friction bonnet and back off the tap ferrule as needed.
Replacement front seat o-ring for the Perlick 630SS faucet. This is the gasket that the push back handle comes into contact with, stopping flow of the beer.
The classy way to say "Don't you dare drink my beer!" Do you have a draft system and live with either teenage kids or thirsty roomates? This can potentially be a beer draining arrangement. When you leave for the weekend, stop the flow with a faucet lock. A quick easy locking system that attaches directly to the faucet. Specifically designed for Perlick 630 series draft faucets. For standard beer faucets, please see D1274.
Take your beer on the go with the help of this handy growler filler attachment for Perlick 630SS and 650SS faucets. Filling growlers straight from the tap is tough task, and you're more than likely to lose most of the beer's carbonation in the process. By running a short line of 3/8" tubing from the growler filler to the bottom of your growler, the beer can flow gently into the vessel and fill from the bottom up. Be sure to use the flow control knob to slow down the flow rate. If you're using the standard faucet, you may want to turn down the PSI on your regulator before filling.
Fix your old, stuck, or leaky faucet with new washers!
Most faucets that aren't working properly, just need a good cleaning and some new washers
Fits most American beer faucets, including D1200, D1205, D1207, and D1215
Does not work on stout, forward sealing, or European faucets
Fix an old faucet that is still functionally sound but is old, leaking or just hard to use. Fits our faucets D1200, D1205,D1207, & D1215 and 95% of all beer faucets ever made.
Does not work on stout faucets, the sealed forward faucets, Perlick faucets, nor European faucets.
If you have an old school 500-series Perlick faucet, this adapter will allow you to hook up the Tapcooler Counter Pressure Bottle Filler to your draft system. The adapter threads onto the Tapcooler, replacing the regular fitting so the unit can be used with these older Perlick faucet models. A must-have accessory if you're a 500-series owner!
This is the faucet adapter by itself. Use this faucet adapter to connect a draft faucet directly to a keg using a flare quick disconnect, KEG720 for ball lock or KEG760 for pin lock. Faucet, knob and quick disconnect are not included. Will not work with our creamer faucets, the vent-matics, flow control Intertap or flow control Perlick faucets (compatible with standard Intertap/Perlick faucets). Unit does come with faucet collar for mounting adapter to faucet. The faucet adapter is made from stainless steel. The outside collor is chrome plated brass.
The Tapcooler Counter Pressure Bottle Filler is an all-new, easy-to-use bottling device!
Allows you to perfectly bottle beer from a forward-sealing beer faucet without CO2 loss
Purge bottles and headspace with CO2 to keep oxygen out, prolonging the life of your beer
Perfect for bottling for competitions, sending bottles home with friends, or to take on the go!
Easy to setup and super easy clean.
For a Duotight-compatible filler, check out the NukaTap Counter Pressure Bottle Filler
The Tapcooler Counter Pressure Bottle Filler is the best way to quickly and easily fill bottles of homebrew directly from your draft system. No need to mess with alternate liquid lines or other complex contraptions. Just slide the Tapcooler into any forward sealing faucet (such as a Perlick, Intertap, or Nukatap) hook up a CO2 line, and you're ready to roll. Whether you're filling bottles for a competition or just grabbing a couple to share with your friends, the Tapcooler is quick and easy to use, and will help maintain the flavor, aroma, and carbonation level of your beer so it tastes the same out of the bottle as it would out of the tap.
A counter pressure bottle filler is the best tool for bottling, as the bottle is under pressure while the carbonated beer flows in, which results in a minimal loss of the CO2 in solution.
The Tapcooler improves upon the standard counter pressure filler, as it plugs directly into your draft faucet. Other counter pressure solutions require you to hook up a separate liquid line, which is not something standard draft systems have setup and requires additional time to prep. With the Tapcooler, you can have it setup and ready to go in less than a minute! The Tapcooler design is also advantageous because after you are done filling the bottle, it stays in place hooked up to your faucet while other fillers require you to set the unit aside and pick it back up again for the next bottle.
Connecting your CO2 line is also a snap. You can either hook up directly with a 3/16" push-fit line, or connect your line to the included barb fitting. You can also purchase the gas ball lock adapter (KEG881), which gives you the ability to attach a gas-in disconnect directly to the filler unit. We highly recommend picking up this optional accessory!
The Tapcooler is designed to fill beer and CO2 from the bottom of the bottle through the telescoping bottle connection tube. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you open the tap and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and little to no foam during the filling process.
The telescoping bottle connection tube allows you to fill bottles as small as 4.5" tall and up to 12.5" tall. You can fill taller bottles with the Tapcooler, but the tube will not reach the bottom of the bottle, which can lead to some splashing. When filling wide mouth containers, a bottle stopper of suitable size and with a 9 mm hole can be used as an adapter.
The filler features a push button CO2 purge valve, which allows you to purge the bottle of oxygen before and after filling. It also includes an adjustable pressure relief valve, giving you the ability to change the filling speed. The pressure relief valve also acts as an overflow port for excess beer or foam to escape when filling.
One of the best features of the Tapcooler is that it's super easy to clean. Cleaning other bottle fillers can be a chore and take lots of time. The Tapcooler comes apart easily and allows you to clean all parts effectively and easily after each use.
All metal parts that come into contact with your beer are made from 304 stainless steel. The barb and ball lock CO2 adapters are made of aluminum.
Finally, the Tapcooler comes chock full of optional accessories that will adapt your filler perfectly to your setup. See the "You Might Also Need" section below for list of accessories!
Forward-Sealing Faucet Compatibility
Tapcooler fits Intertap, Nukatap, Ultratap, Vent-Matic, and Perlick 600 series faucets. These fillers can be converted to fit Perlick 500 series with the optional tap connector (KEG887). Cannot be used with ventilated beer taps, i.e. non-forward sealing beer taps.
Features:
Hooks up directly to any forward sealing faucet for quick and easy use.
Quick setup and easy maintenance.
Perfect for bottling for competitions, sending bottles home with friends, or just to have some bottles on the go!
A range of accessories are offered for more range and easier use!
Purge bottles with CO2 before and after filling for longer lasting beer!
Pressure relief valve allows for control over filling speed and allows excess foam to escape for the perfect pour every time!
Made from 304 stainless steel
Easy to use and clean!
Keep the flies away and pesky microbes at bay with these beer faucet brush-style plugs. Made to sit flush when inserted into Intertap, NukaTap and Perlick brand faucets. Easily cleans your faucet spout and can be left in place when the tap is not in use. For the most sanitary seal possible, give the brush a good spray down with sanitizer before plugging the faucet.
Comes in 2-pack.
Outfit any 3" diameter draft tower with these stainless steel Intertap Tower Shanks with Duotight compatible tailpiece. The 1/4" barb pairs perfectly with the Duotight 6.35 mm x 8 mm reducer (DUO100), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 & D1718).
The Duotight fitting is sold separately and can be found below under "You Might Also Need".
Please note these shanks are not compatible with Perlick flow control faucets.
Kegland Part number: KL01137
Unbeatable value for a homebrew counter pressure bottle filler!
Fill bottles directly from your keg with virtually no CO2 loss
Purge oxygen from bottles before filling to preserve the quality of your beer
Accessory set included for multiple connection options — no expensive add-on items needed!
Duotight connections offer unparalleled customization and adaptability to your specific needs
Compatible with forward-sealing faucets — NukaTap, Intertap, Perlick 600-series and others
Running late but don't want to leave home without a couple of bottles of your latest creation? The Nukatap Counter Pressure Bottle Filler will have your precious cargo packed and ready at the drop of a hat! Slip it right into the nozzle of your Nukatap, Intertap, or other forward-sealing faucet to fill bottles right from the tap. Gas can be quickly connected using a bare end of 8 mm OD EVABarrier tubing, or connect the included Ball Lock Adapter to hook up gas using a Ball Lock Quick Disconnect. Not enough room under your draft tower? No problem! Like the gas-in port, you can swap out the push-in spout for the Duotight adapter, allowing you to connect tubing directly to the filler, or connect a Ball Lock Post Adapter and use a Ball Lock jumper line to fill right off your keg. While other fillers on the market force you to purchase upgrade accessories to improve functionality, the Nukatap Filler gives you more options to fill right from the get-go.
This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle.
Counterpressure filling is the absolute best option for packaging beer from your keg without affecting its quality. Filling a growler straight from the tap is always an option, but if you want your beer to be at its best when you share it with the world, this is only way to go. The Nukatap Filler will make sure your brew doesn't pick up oxygen or lose carbonation in the filling process, keeping your creation in tip-top condition
Includes:
All stainless steel counter pressure filler
Push-in spout compatible with forward-sealing faucets
(2) 8 mm Duotight adapters for filler and NukaTap spout
(2) Ball Lock Post Adapters (Red / Yellow)
19.5" length of 8 mm OD x 5 mm ID EVABarrier tubing
KegLand Part Number: KL21760
Forward-sealing design prevents beer residue from gumming up the faucet!
Threaded spout can be replaced with a variety of attachments
Unique sliding shuttle design allows the faucet to last longer than standard floating o-ring design
304 stainless steel construction
The patented Stainless Steel Intertap Faucet is a forward sealing faucet that represents the most modern faucet design. It has a modular, threaded spout which can fit a variety of different attachments including a growler filler or a stout spout.
In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour.
Other forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time.
The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all.
304 Stainless Steel construction so you don't have to worry about chrome plating wearing off and exposing your beer to brass.
Kegland Part number: KL00970
Standard, plunger-style sample valves can be a bit of hassle when it's time to check your gravity or do a taste test. Replace it with this simple T.C. x Draft Shank adapter which allows you to pour samples with your preferred beer faucet. We recommend using the NukaTap Flow Control Faucet with Self-Closing Spring. This will allow you to put some restriction on the beer flow and come in very handy when taking samples from a pressurized conical or brite tank. Also compatible with Intertap, Perlick, and other faucets. Please note: standard NukaTap SS Faucet and Self-Closing Spring will not work with this shank. You can use a NukaTap SS faucet, but without the autoclose spring. Specifications: 2.75" total length Standard shank assembly 1.5" T.C. connection KegLand Part Number: KL19989
Love bringing a growler of your brew with you, but hate the waste and mess of filling it off your tap? Just pop this handy Stainless Steel Growler Filler into your faucet, attach an appropriate length of tubing, and proceed to fill from the bottom of the growler up!
Filling from the bottom upward will dramatically reduce foaming, which less mess and wasted beer! and fill away!
Faucet insert OD is 1/2”, barbed outlet is 3/8” OD.
This model fits standard faucets. Will not fit Perlick or Perl faucets as their nozzles have a different inner diameter. For Perlick faucets please checkout item D1224.
Nothing looks quite as nice as beer pouring out of a sleek, matte black draft tower. These are the same tower kits included with the KOMOS Kegerator. Includes EVABarrier draft tubing and Duotight push-to-connect fittings for easy assembly. These towers can be purchased without faucets, or you can choose your preferred faucets from the add-on options above. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great!
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
Includes:
Stainless steel draft tower with matte black finish
Stainless steel faucet shank(s) with Duotight tailpieces
EVABarrier gas and beverage tubing
Draft tower mounting screws
Faucet wrench
1-3 Tap Tower Dimensions:
13.4 in. tall (without faucets)
3 in. tower diameter
4.4 in. base diameter
4 Tap Tower Dimensions:
15.75 in. tall (without faucets)
4.5 in. tower diameter
Interior mounting holes (does not include bottom collar)
Please note: Perlick Flow Control faucets are not compatible with the included Intertap tower shanks.
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Keep fruit flies and spiders out of your draft beer faucet with this handy plug brush. Plugs your faucet when you are not using it. Attached brush cleans faucet on the way in and out. We like to spray the brush moist with Alpet Spray Sanitizer for the most sanitary seal possible.
Note: Does not sit flush on Intertap, NukaTap or Perlick faucets
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.
Nothing looks quite as nice as beer pouring out of a shiny stainless steel draft tower. These are the same tower kits included with the KOMOS Kegerator. Includes EVABarrier draft tubing and Duotight push-to-connect fittings for easy assembly. These towers can be purchased without faucets, or you can choose your preferred faucets from the add-on options above. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great!
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
Includes:
Stainless steel draft tower
Stainless steel faucet shank(s) with Duotight tailpieces
EVABarrier gas and beverage tubing
Draft tower mounting screws
Faucet wrench
1-3 Tap Tower Dimensions:
13.4 in. tall (without faucets)
3 in. tower diameter
4.4 in. base diameter
4 Tap Tower Dimensions:
15.75 in. tall (without faucets)
4.5 in. tower diameter
Interior mounting holes (does not include bottom collar)
Please note: Perlick Flow Control faucets are not compatible with the included Intertap tower shanks.
Comes with a back nut, plastic collar, hex nut, and 8 mm Duotight Adapter compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Requires a 1" hole saw for installation. When set in place, the shank will only have about 2 1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 5-1/8" - Total Length (Tip to Tip) 4" - Shank Length (Without Nut & Barb) 3" - Thread Length 2-1/2" - Pass Through Length Kegland Part number: KL11945
Designed specifically for cleaning draft lines, this hand pump pressurized keg is easy to use and doesn't need CO2 like many other line cleaning kegs. After filling the keg with cleaning solution, unscrew the beer line from your sanke coupler and attach it to the included beer thread coupler to hook it up directly to the cleaning keg. Pumps from the bottom to the top, allowing you to leave the cleaning solution in the line for 15 minutes. We recommend cleaning your lines every time you switch out a keg or every 6 weeks, whichever comes first.
1 gallon capacity
Comes with a 3/16” x 5/16” hose
Included Female Beer Thread (5/8" BSP) Coupler
Also Included:
Beer Line Cleaning Brush
With 8" length and 5/8" diameter, this brush is ideal for cleaning keg couplers, draft faucets, 3-Piece airlocks, 1/2" bottle fillers, and 3/8" or 1/2" spigots. Features a coated tip to prevent scratching or damaging surfaces.
Draft Beer Faucet Brush and Plug
Keep fruit flies and other bugs out of your draft beer faucets when not in use. This plug style brush will clean the faucet nozzle on the way in and when pulled out. It works with standard beer faucets and Intertap, NukaTap, and Perlick brand faucets.
Double Shank and Faucet Wrench
Draft wrench designed to tighten the hex nut on the back of a faucet shank. Well suited for keezers or even draft towers. Features a pin wrench for tightening the faucet coupling ring where your faucet attaches to the draft shank.
This tower shank with Matte Black finish matches perfectly with the NukaTap Stealth Bomber faucet and features a Duotight compatible tailpiece. The 1/4" barb pairs with the Duotight 6.35 mm x 8 mm reducer (DUO10), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 & D1718). The Duotight fitting is sold separately and can be found below under "You Might Also Need". Please note these shanks are not compatible with Perlick brand faucets. KegLand Part Number: KL20084
This shank's small design makes it perfect for attaching a faucet to a tower. Included on the Intertap towers that we stock but can be used to replace the short shank on any 3" diameter tower. Made from stainless steel.
Please note these shanks are not compatible with Perlick brand faucets.
Kegland Part number: KL01090
Keep potential “beer-samplers” and kids out of your draft system with this Beer Faucet Lock.
Give yourself some peace-of-mind, knowing that your draft system is locked and your beer is safe. If you're a serious homebrewer this thought has crossed your mind: the thought of someone walking by and pulling on the tap handle, letting beer run out. Be it friends or your kids, you want your system to be secure. This quick and easy Beer Faucet Lock attaches directly to the faucet. It gives a solid squeeze on the handle, locking it into place, without fear of damaging it. This one-of-a-kind lock is something you’ll be glad you own.
Please note - this lock will not work with Perlick 650SS, 630SS or Intertap faucets
What makes KOMOS Double-Wide Kegerator better than the rest?
Designed to hold up to EIGHT 5-gallon Slimline Torpedo homebrew kegs
Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components
Faucets mount to a high-quality stainless steel tower, rather than cheap chrome plated tower
Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming
EVABarrier double walled draft tubing protects your beer against oxidation
Duotight push-to-connect fittings make assembly a breeze
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
Faucets sold separately
Some people say that one kegerator just isn't enough—but those people never met the KOMOS Double-Wide Kegerator. With a stunning 8-keg capacity and double-tower configuration, this beast of a home kegerator can house enough beer to satisfy even the thirstiest brewers.
Please note: this Double-Wide Kegerator with Stainless Double T Bar Tower package does not come with faucets as standard. Select one of the recommended options below to add faucets to your order, or purchase your preferred faucets separately.The included tower shanks are not compatible with Perlick Flow Control faucets.
The KOMOS Double-Wide Kegerator offers the same stunning set of features that clearly separate the standard model as the most modern kegerator on the market. With more interior space than any other home kegerator model, the KOMOS Double-Wide Kegerator is designed to fit up to eight 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26-82°F, dual gas inlets at the back, stainless steel internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator.
The most eye-catching difference between the KOMOS Double-Wide and other kegerators is definitely the capacity. With an extra wide interior and double tower configuration, this is likely the only home kegerator you'll find that can hold up to eight 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Many kegerators only have one inlet that is only wide enough for a single line to pass through. Both inlets on the back of the KOMOS unit are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines.
Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the towers to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines. We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip trays couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Feature Summary:
Stainless Steel Air Cooled Double T Bar Tower
Duotight Fittings make connecting draft lines a breeze
Digital Thermostat with wide 26 - 82° F temp range.
Robust KOMOS Dual Gauge Regulator included
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Countertop Style Drip Trays
Stainless Steel Floor for additional keg support
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x 12m roll
Gas lines can be cut to whatever length best suits your needs
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
Detailed instructions on assembly and use
Specifications:
35.4" wide
27.8" deep
34.3" with CO2 mount
33" Tall (fridge only)
35.5" with Caster wheels
49.25" with tower
51.5" with Casters and Tower
110V - 50 hz
0.9 Amp draw
Optimal ambient temperature is 65°F - 80°F
Internal Dimensions:
31.6" wide
20.4" deep
17.1" on the left side where the compressor sits
28.3" tall
What Fits:
5 Gal. Torpedo Keg - 6
5 Gal. Slimline Torpedo Keg - 8
6 Gal. Torpedo Keg - 6
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 6
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 8
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 6
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 2
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 3
15.5 Gal. Half Barrel Keg (Full Size Keg) - 2
See below for the Kegerator Instruction Manual.
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
What makes KOMOS Double-Wide Kegerator better than the rest?
Designed to hold up to EIGHT 5-gallon Slimline Torpedo homebrew kegs
Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components
Faucets mount to a high-quality stainless steel tower, rather than cheap chrome plated tower
Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming
EVABarrier double walled draft tubing protects your beer against oxidation
Duotight push-to-connect fittings make assembly a breeze
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
Faucets sold separately
Some people say that one kegerator just isn't enough—but those people never met the KOMOS Double-Wide Kegerator. With a stunning 8-keg capacity and double-tower configuration, this beast of a home kegerator can house enough beer to satisfy even the thirstiest brewers.
Please note: this Double-Wide Kegerator with Stainless Double T Bar Tower package does not come with faucets as standard. Select one of the recommended options below to add faucets to your order, or purchase your preferred faucets separately.The included tower shanks are not compatible with Perlick Flow Control faucets.
The KOMOS Double-Wide Kegerator offers the same stunning set of features that clearly separate the standard model as the most modern kegerator on the market. With more interior space than any other home kegerator model, the KOMOS Double-Wide Kegerator is designed to fit up to eight 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26-82°F, dual gas inlets at the back, stainless steel internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator.
The most eye-catching difference between the KOMOS Double-Wide and other kegerators is definitely the capacity. With an extra wide interior and double tower configuration, this is likely the only home kegerator you'll find that can hold up to eight 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Many kegerators only have one inlet that is only wide enough for a single line to pass through. Both inlets on the back of the KOMOS unit are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines.
Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the towers to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines. We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip trays couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Feature Summary:
Stainless Steel Air Cooled Double T Bar Tower
Duotight Fittings make connecting draft lines a breeze
Digital Thermostat with wide 26 - 82° F temp range.
Robust KOMOS Dual Gauge Regulator included
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless Steel Door
Countertop Style Drip Trays
Stainless Steel Floor for additional keg support
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x 12m roll
Gas lines can be cut to whatever length best suits your needs
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
Detailed instructions on assembly and use
Specifications:
35.4" wide
27.8" deep
34.3" with CO2 mount
33" Tall (fridge only)
35.5" with Caster wheels
49.25" with tower
51.5" with Casters and Tower
110V - 50 hz
0.9 Amp draw
Optimal ambient temperature is 65°F - 80°F
Internal Dimensions:
31.6" wide
20.4" deep
17.1" on the left side where the compressor sits
28.3" tall
What Fits:
5 Gal. Torpedo Keg - 6
5 Gal. Slimline Torpedo Keg - 8
6 Gal. Torpedo Keg - 6
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 6
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 8
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 6
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 2
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 3
15.5 Gal. Half Barrel Keg (Full Size Keg) - 2
See below for the Kegerator Instruction Manual.
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included!
Separate cone and tank cooling jackets with 3" of internal insulation
20% extra headspace with a working volume of 10 bbl and max volume of 12 bbl
Ships domestically from within the contiguous United States
MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Impressive Features
Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks.
3” of internal insulation between tank and outter jacket when the industry standard is 2”
Horizontal racking arm and carbonation stone
Separate cone and tank cooling jackets
DIN Rotating racking arm for safety and ease of use
4” TC top hop port with handle
Carbonation Stone included with all tanks
2” Bottom valve for easier trub removal (3.5 bbl and up)
CIP spinning spray ball and piping built-in (3.5 bbl and up)
25% head-space above stated volume
Industry standard 2b finish
All Features:
304 stainless steel construction
The outer shell is 2 mm thick with a brushed finish
The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated
Includes a glycol jacket which is dimple welded and 1.5 mm thick
Oversized for 25% average headspace
Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI
Pt10 Thermocouple for high accuracy
Perlick style sample valve
Spinning CIP cleaning head and separate piping
Rotating racking arm upgraded with DIN fitting for increased reliability
Analog temperature gauge
Oversized yeast dump port
Sealed Pressure Gauge
Hop port
Carb stone
Separate blow-off pipe
Side man-door
Ladder rack (7 bbl and up)
Shadowless Manway
Specifications for 10 bbl Conical:
Grade 304 Stainless Steel
Internal Finish: #2B
Tank Height: 95", With Blowoff Pipe: 102"
Tank Diameter: 50"
Empty Weight: 750 lbs
Working Volume: 10 bbls
Max Volume: 12 bbls
Working Pressure: 1 Bar (15 psi)
Jacket Surface area: 4,450 in² (2.871 m²)
All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
German Perle is generally seen as an aroma hop with citrus and spicy notes. It has characteristics similar to Hallertau Mittlefruh but with a higher alpha acid. This varietal was first bred in 1978 at a research institute in Hull, Germany.
Hop Statistics:
Alpha Acids: 6 - 9%
Beta Acids: 3 - 4.5%
Alpha-Beta Ratio:
Cohumulone: (% of alpha acids): 28-31%
Total Oils in mls per 100 grams dried: 0.8 - 2
Storage(% alpha acids remaining after 6 months storage at 68° F): N/A
Similar Hop Varieties: N/A
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid November.
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included!
Separate cone and tank cooling jackets with 3" of internal insulation
Over 25% extra headspace with a working volume of 3.5 bbl and max volume of 4.8 bbl
Ships domestically from within the contiguous United States
MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Impressive Features
Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks.
3” of internal insulation between tank and outer jacket when the industry standard is 2”
Horizontal racking arm and carbonation stone
Separate cone and tank cooling jackets
DIN Rotating racking arm for safety and ease of use
4” TC top hop port with handle
Carbonation Stone included with all tanks
2” Bottom valve for easier trub removal (3.5 bbl and up)
CIP spinning spray ball and piping built-in (3.5 bbl and up)
25% head-space above stated volume
Industry standard 2b finish
All Features:
304 stainless steel construction
The outer shell is 2 mm thick with a brushed finish
The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated
Includes a glycol jacket which is dimple welded and 1.5 mm thick
Oversized for 25% average headspace
Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI
1x Pt100 Thermocouple interface
Perlick style sample valve
Spinning CIP cleaning head and separate piping
Rotating racking arm upgraded with DIN fitting for increased reliability
Analog temperature gauge
Oversized yeast dump port
Sealed Pressure Gauge
Hop port
Carb stone
Separate blow-off pipe
Side man-door
Ladder rack (7 bbl and up)
Specifications for 3.5 bbl Conical:
Grade 304 Stainless Steel
Internal Finish: #2B
Tank Height: 72", With Blowoff Pipe: 78"
Tank Diameter: 35.9"
Empty Weight: 485 lbs
Working Volume: 3.5 bbls
Max Volume: 4.8 bbls
Working Pressure: 1 Bar (15 psi)
Jacket Surface area: 1,558 in² (1.005 m²)
All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability
Made from 304 stainless steel throughout with passivated 2B polished finished on the interior
Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included!
Separate cone and tank cooling jackets with 3" of internal insulation
20% extra headspace with a working volume of 5 bbl and max volume of 6 bbl
Ships domestically from within the contiguous United States
MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set.
Great Quality from MB
MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers.
Great Value from MoreBeer! Pro
If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you.
Impressive Features
Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks.
3” of internal insulation between tank and outter jacket when the industry standard is 2”
Horizontal racking arm and carbonation stone
Separate cone and tank cooling jackets with individual Pt100 Thermocouples
DIN Rotating racking arm for safety and ease of use
4” TC top hop port with handle
Carbonation Stone included with all tanks
2” Bottom valve for easier trub removal (3.5 bbl and up)
CIP spinning spray ball and piping built-in (3.5 bbl and up)
25% head-space above stated volume
Industry standard 2b finish
All Features:
304 stainless steel construction
The outer shell is 2 mm thick with a brushed finish
The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated
Includes a glycol jacket which is dimple welded and 1.5 mm thick
Oversized for 25% average headspace
Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI
1x Pt100 Thermocouple interface
Perlick style sample valve
Spinning CIP cleaning head and separate piping
Rotating racking arm upgraded with DIN fitting for increased reliability
Analog temperature gauge
Oversized yeast dump port
Sealed Pressure Gauge
Hop port
Carb stone
Separate blow-off pipe
Side man-door
Ladder rack (7 bbl and up)
Shadowless Manway
Specifications for 5 bbl Conical:
Grade 304 Stainless Steel
Internal Finish: #2B
Tank Height: 81", With Blowoff Pipe: 86"
Tank Diameter: 42"
Empty Weight: 574 lbs
Working Volume: 5 bbls
Max Volume: 6 bbls
Working Pressure: 1 Bar (15 psi)
Jacket Surface area: 2,176 in² (1.404 m²)
All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included! Separate cone and tank cooling jackets with 3" of internal insulation Over 25% extra headspace with a working volume of 30 bbl and max volume of 37.75 bbl Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Impressive Features Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks. 3” of internal insulation between tank and outter jacket when the industry standard is 2” Separate cone and tank cooling jackets with individual Pt10 Thermocouples DIN Rotating racking arm for safety and ease of use 4” TC top hop port with handle Carbonation Stone included with all tanks 2” Bottom valve for easier trub removal (3.5 bbl and up) CIP spinning spray ball and piping built-in (3.5 bbl and up) 25% head-space above stated volume Industry standard 2b finish All Features:
304 stainless steel construction Horizontal racking arm and carbonation stone The outer shell is 2 mm thick with a brushed finish The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated Includes a glycol jacket which is dimple welded and 1.5 mm thick Oversized for 25% average headspace Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI 2x Pt10 Thermocouple interfaces at top and bottom (3x Pt10 on 30 bbl & up) Perlick style sample valve Spinning CIP cleaning head and separate piping Rotating racking arm upgraded with DIN fitting for increased reliability Analog temperature gauge Oversized yeast dump port Sealed Pressure Gauge Hop port Carb stone Separate blow-off pipe Side man-door Ladder rack (7 bbl and up) Shadowless Manway Specifications for 30 bbl Conical: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 137", With Blowoff Pipe: 142" Tank Diameter: 69" Empty Weight: 1,499 lbs Working Volume: 30 bbls Max Volume: 37.75 bbls Working Pressure: 1 Bar (15 psi) Jacket Surface area: 11,109 in² (7.167 m²) All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Stacking 10 bbl horizontal lagering tanks. Comes as a set of (2) 10 bbl brite tanks, top and bottom. See technical drawing below for more details.
MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards. All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by the MoreBeer! Pro one year warranty. Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume.
Features Include:
15 PSI (1 bar) working pressure
Side manway door for cleaning
1.5" Tri-clamp carbonation stone
1.5" Tri-clamp pressure gauge
1.5" Tri-clamp Perlick-style sample valve
1.5" Tri-clamp pressure/vacuum relief
1.5" bottom tri-clamp drain
Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning
3/4" NPT glycol ports
Construction
304 stainless steel construction
Double walled with 80 mm thick polyurethane insulation
External Shell: 2 mm thick with brushed finish
Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated
Glycol Jacket: dual cooling zone, 1.5mm thick
Specifications:
Stacked Tank Height: 105"
Stacked Tank Depth: 91"
Stacked Tank Width: 46"
Stacked Empty Weight: 1,850 lbs
Working Volume per Tank: 10 bbl
Total Volume per Tank: 11.5 bbl
Jacket Surface Area per Tank: 3,543 in² (2.286 m²)
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Stacking 10 bbl horizontal lagering tanks. Comes as a set of (2) 10 bbl brite tanks, top and bottom. See technical drawing below for more details.
MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards. All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by the MoreBeer! Pro one year warranty. Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume.
Features Include:
15 PSI (1 bar) working pressure
Side manway door for cleaning
1.5" Tri-clamp carbonation stone
1.5" Tri-clamp pressure gauge
1.5" Tri-clamp Perlick-style sample valve
1.5" Tri-clamp pressure/vacuum relief
1.5" bottom tri-clamp drain
Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning
3/4" NPT glycol ports
Construction
304 stainless steel construction
Double walled with 80 mm thick polyurethane insulation
External Shell: 2 mm thick with brushed finish
Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated
Glycol Jacket: dual cooling zone, 1.5mm thick
Specifications:
Stacked Tank Height: 105"
Stacked Tank Depth: 91"
Stacked Tank Width: 46"
Stacked Empty Weight: 1,850 lbs
Working Volume per Tank: 10 bbl
Total Volume per Tank: 11.5 bbl
Jacket Surface Area per Tank: 3,543 in² (2.286 m²)
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, sight glass, and dedicated CIP pipe system—all fittings included! Over 15% extra headspace with a working volume of 60 bbl and max volume of 69.5 bbl Double walled with 80 mm thick polyurethane insulation and 1.5 mm thick dual cooling zone glycol jacket Made to order—contact our MoreBeer! Pro sales representatives today!
MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. MB jacketed brite tanks are made from 304 stainless steel and built to high quality standards. All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty. Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include: 15 PSI (1 bar) working pressure Side manway door for cleaning 1.5" Tri-clamp carbonation stone 1.5" Tri-clamp pressure gauge 1.5" Tri-clamp dial face bi-metal, easy-read analog thermometer 1.5" Tri-clamp Perlick-style sample valve 2" Tri-clamp pressure/vacuum relief 2" Center bottom tri-clamp drain Sight-glass for reading volumes Dedicated pipe system with 4" Tri-clamp center top opening and 1.5" tri-clamp rotating CIP spray ball for easy cleaning 3/4" NPT glycol ports 2x PT10 Thermocouple interface Shadowless Manway Construction: 304 stainless steel construction Double walled with 80 mm thick polyurethane insulation External Shell: 2 mm thick with brushed finish Internal tank: 3 mm thick with smooth ground welds, 2B finish and passivated Glycol Jacket: dual cooling zone, 1.5mm thick Specifications: Tank Height: 145.5" Tank Diameter: 81" Empty Weight: 2,315 lbs Working Volume: 60 bbl Total Volume: 69.5 bbl Jacket Surface Area: 16,994 in² (10.964 m²) Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
MoreBeer Presents The Lineup The best brands in brewing — curated, stocked, and ready to ship. Forty-plus partners, one cart, free shipping over $79. Headliners KegLand◆BrewBuilt◆Lallemand◆Briess◆KOMOS◆Viking Malt Main Stage BlichmannNOW OURS◆Brewzilla◆Torpedo Kegs◆Artisan Hops◆CellarScience◆AnvilNOW OURS◆Cannular◆Duotight◆Fermentis◆Five Star◆Ss Brewtech◆Rahr Featured Fermzilla◆Intertap◆Weyermann◆Flash Brewing◆White Labs◆MB◆Brewtools◆Yakima Chief◆Wyeast◆Speidel◆Anton Paar◆ForgeFit Also Featuring Omega Yeast◆Taprite◆Zahm & Nagel◆Tilt◆Abstrax◆Grainfather◆True Citrus◆Imperial Yeast◆Perlick◆Pop...
Read more
,
by MoreBeer!
Perfect Your Pour: The Ultimate Kegerator Upgrade Guide
You've Perfected the Recipe. Now, Perfect the Pour. You've spent weeks, maybe even months, dialing in that perfect recipe. You nailed the grain bill, the...
