Search results for "Auto siphon or racking cane"

The Easy Jiggler combines the convenience of a hand-pump auto siphon with the longevity and simplicity of a stainless steel racking cane. Plastic auto siphons are easy to use, but they're prone to cracking after heavy use and can break easily if they're dropped on the ground. Stainless racking canes won't break on you, but getting the siphon started is its own debacle. You either have to cap your carboy and blow through the hood, exposing your beer to oxygen, or you have to suck on the end of the hose, which isn't exactly sanitary. Enter the jiggle siphon, the last racking cane you'll ever own! Get jiggle with it! Made from 304 stainless steel, the Easy Jiggler will last a lifetime and can be quickly disassembled for cleaning and sanitizing. To use, simply insert the tip of the jiggler into your fermenter and give it a few long, steady strokes to begin the siphon. Once it's going, you'll hear the glass ball inside spinning away. To avoid disturbing the trub cake at the bottom of the fermenter, we recommend doing the jiggling action near the surface and then lower the cane once the siphon has begun. 22.5" long Made from 304 stainless steel Includes 60" length of 10mm ID silicone tubing Kegland Part Number: KL14021  

Read more less

Ideal for racking in and out of barrels, or any other medium-sized vessels without a bottom valve. The built-in Sediment Pin allows you to set how far from the bottom of the vessel you want the wand to draw from. Side draw ports help pull in beer without drawing sediment. Durble, easy to clean stainless steel construction.   Specifications: AISI304 Stainless Steel construction 30" Long straight (usable) portion of racking cane 1" Diameter Tubing 1.5" Tri-Clamp Connection

Read more less

Stainless Steel racking cane - 3/8 inch OD x 26 inches long from tip to bend (30" total), with curved top. 3/8 inch diameter is the standard size for filling beer bottles.

Read more less

Clear plastic racking cane with curve. Good for 6.5 gallon carboys. 3/8" diameter is the standard size for filling beer bottles. 3/8" OD 30" total length (including bend) 27" from tip to bend  

Read more less

Starts siphon with a single stroke Made from BPA-free acrylic plastic Includes anti-sediment tip Easy to dissasemble for cleaning and drying 7/8" outer diameter fits glass carboys, 1-gallon jugs or Growlers The name says it all! No more struggling with all the different techniques to get a siphon started. The Easy-Siphon will get your transfer started quickly and with zero fuss. Simply submerge the the siphon, pull the inner tube up about halfway, then pump down to start the siphon. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. Comes with 3/8" cane and 24" racking tube. 5/16" or 3/8" ID tubing must be purchased separately. Also available in 1/2" and 3/8" Mini models. Maximum Temperature: 140°F (60°C) Instructions:  Sanitize and rinse your Easy-Siphon.  Get the inner tube gasket and the outer tube wet.  Attach the curved siphon to a hose.  Submerge the end of Easy-Siphon into your container.  If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to.  Pull the inner tube up about 7" until the liquid fills the tube.  Pump the inner tube down and siphon will begin.  Pull out inner tube and sanitize Easy-Siphon for storage.  This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into liquid. If you need to exceed these limits, we recommend using a stainless racking cane.

Read more less

Starts siphon with a single stroke Made from BPA-free acrylic plastic Includes anti-sediment tip Easy to dissasemble for cleaning and drying 7/8" outer diameter fits glass carboys, 1-gallon jugs or Growlers The name says it all! No more struggling with all the different techniques to get a siphon started. The Easy-Siphon will get your transfer started quickly and with zero fuss. Simply submerge the the siphon, pull the inner tube up about halfway, then pump down to start the siphon. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. Comes with 1/2" cane and 24" racking tube. 7/16" or 1/2" ID tubing must be purchased separately. Also available in 3/8" and 3/8" Mini models. Maximum Temperature: 140°F (60°C) Instructions:  Sanitize and rinse your Easy-Siphon.  Get the inner tube gasket and the outer tube wet.  Attach the curved siphon to a hose.  Submerge the end of Easy-Siphon into your container.  If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to.  Pull the inner tube up about 7" until the liquid fills the tube.  Pump the inner tube down and siphon will begin.  Pull out inner tube and sanitize Easy-Siphon for storage.  This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into liquid. If you need to exceed these limits, we recommend using a stainless racking cane.

Read more less

Leave the gunk behind and keep your beer clear with this racking cane filter. A great solution at the right price.    This Racking Cane Filter Screen is very effective when racking with whole hops, oak, or fruit in the fermenter. Simply slide this over the bottom of the racking cane and begin the siphon! Made from Stainless Steel mesh. Some customer are also using this in the their keg attached to the bev out dip tube.    Fits on a 3/8" stainless steel racking cane.   Note: You may want to use a hose clamp to tighten this to the racking cane.   

Read more less

Starts siphon with a single stroke Made from BPA-free acrylic plastic Includes anti-sediment tip Easy to dissasemble for cleaning and drying 7/8" outer diameter fits glass carboys, 1-gallon jugs or Growlers Mini Easy Siphon will reduce loss when racking from small vessels The name says it all! No more struggling with all the different techniques to get a siphon started. The Easy-Siphon will get your transfer started quickly and with zero fuss. Simply submerge the the siphon, pull the inner tube up about halfway, then pump down to start the siphon. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. Comes with 3/8" cane and 15" racking tube. 5/16" or 3/8" ID tubing must be purchased separately. Maximum Temperature: 140°F (60°C) Instructions:  Sanitize and rinse your Easy-Siphon.  Get the inner tube gasket and the outer tube wet.  Attach the curved siphon to a hose.  Submerge the end of Easy-Siphon into your container.  If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to.  Pull the inner tube up about 7" until the liquid fills the tube.  Pump the inner tube down and siphon will begin.  Pull out inner tube and sanitize Easy-Siphon for storage.  This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into liquid. If you need to exceed these limits, we recommend using a stainless racking cane.

Read more less

Clear plastic racking cane with curve. Good for 5 gallon carboys. 3/8" diameter is the standard size for filling beer bottles. 3/8" OD 25" total length (including bend) 21" from tip to bend  

Read more less

Racking canes are the most common tool used to transfer your homebrew from a carboy or other fermentation vessel to your bottling bucket or kegs.  This racking cane comes with a tip cover that will help to keep trub out of the bottling bucket or keg, leaving you with a clearer finished product! 1/2" OD 30" total length (including bend) 27" from tip to bend  

Read more less

Thin walled tubing perfect for siphoning or tranferring liquids when not under pressure. This is the most common size hose for homebrewing that you would need to fit onto the plastic spigots (FE347), 3/8'' OD bottle fillers, and the 3/8'' OD racking canes. 3/8" ID, 1/2" OD 1/8" thick wall  

Read more less

FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. 7/16 inch ID tubing is recomended for use with 1/2 inch Auto Siphons. Thin wall tubing is recomended for siphoning and transferring liquids. For pumping, keg lines, or other pressurized applications, see our thick wall and keg tubing.  

Read more less

Transfer beer or wine between vessels without the hassle of starting a siphon Place your receiving vessel side-by-side or even above the transferring vessel Perfect for transferring between primary and secondary fermenter, or from fermenter to bottling bucket or keg Eliminate excess oxygen exposure caused by hand-pumping or blowing into a carboy hood to start a siphon The Super Sucker transfer pump is the quickest, most hassle-free solution to moving beer or wine between vessels. Rack from primary fermenter to secondary or from carboy to keg without the excess oxygen exposure that results from hand-pumping a siphon or blowing into a carboy hood. Simply run transfer tubing from a racking cane to the pump and then to your receiving vessel, flip the switch, and let the Super Sucker do the work while you kick back and enjoy a cold beverage. With the Super Sucker you don't need gravity or CO2 pressure to move liquid around. Thanks to the pump's considerable max lift height, you can leave your heavy, full fermenter on the ground and place the receiving keg or carboy side-by-side or even above the fermenter on a countertop. The 10 mm barbed inlet and outlet are perfect for use with 3/8" ID tubing. We recommend using our Racking Cane Siphon Kit plus 5 ft. of 3/8" vinyl tubing. Secure pump connections with butterfly hose clamps for easy set up and break down. Features: Self-Priming 10 mm Barbed Inlet/Outlet On/Off Switch Max Flow: 1.12 Gal/min Suction: 5 in. Max Lift: 150 in. (12.5 ft.) Maximum Temperature: 140°F Pressure: 90 psi Voltage: 12V DC (3.5A)  

Read more less

Replacement tip for 1/2" racking cane. Comes standard on our R370.

Read more less

Use for the 1/2'' OD racking cane and 1/2'' OD bottle fillers.  

Read more less

Wide mouth carboys are the easiest glass fermenter to clean with plenty of room to get your arm inside to scrub Add bagged flavoring additions and remove them freely when finished—this can be nearly impossible with traditional narrow neck glass carboys Watch fermentation activity as it's happening! The ultimate advantage of translucent glass or plastic fermenters Ported lid with removable cap sized for a #5 stopper & airlock Carrying harness included for easier handling Glass carboys have been a staple of the brewing and winemaking world for generations, but traditional tight neck carboys aren't without their limitations. Standard glass carboys can be difficult to clean after fermentation and require a siphon or racking cane to transfer liquid out. The wide mouth carboy is extremely easy to clean—simply removing the lid allows you to get your hand or arm all the way inside to scrub away stubborn sediment. And with a convenient spigot at the bottom, you can transfer liquid out of the vessel with ease. Each carboy comes with a carrying harness. See below for optional stainless steel spigots. Features: Gasketed lid for tight seal Included carrying harness Ported lid ready for #5 stopper & airlock Plastic spigot with 3/8" OD barb (tapers from 10-12mm) 20mm (0.78") diameter spigot hole 165mm (6.5") lid opening Continuous thread, 5mm pitch Please note: The carrying harness should not be used to move the vessel when full. The airlock lid is primarily recommended for short fermentations.

Read more less

Semi-Automatic Precision: Delivers a consistent, professional-grade seal in just 3 seconds, eliminating manual lever variability and operator error. Universal Versatility: An adjustable platform fits standard 202 cans (12–16 oz) and can be adapted for 32 oz Crowlers or tin-plated food cans. Durable & Safe Design: Built with rust-resistant 304 stainless steel and a low-voltage 24V DC motor for maximum safety in wet environments. Compact Efficiency: A space-saving benchtop unit designed for easy one-person operation, making it ideal for homebrewers and nano-breweries alike. Superior Freshness: Provides an airtight, 100% light-proof seal to prevent oxidation and keep your beverage carbonated longer than traditional bottling. Power supply sold seprately. See below under You Might Also Need. The Cannular Pro is a semi-automatic can seamer that is easy to use, reliable, and beautifully simple. Whether you're a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you'll find. The Cannular only requires one person to operate, and each can takes roughly 3 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs. The Cannular Pro guarantees a perfect, repeatable seal by automating the seaming process. By eliminating the manual lever, it removes operator variability and ensures consistent pressure for every can. Key Features Semi-Auto Precision: Effortless operation that delivers a uniform, professional-grade seam every time. Universal Compatibility: Designed for all standard 202 cans, including 12 oz, 16 oz, 330 ml, and 500 ml sizes. Adjustable Platform: Features a built-in adjustable table to accommodate various can heights—no additional spacers required. Customizable Pressure: Easily fine-tune the platform height to ensure the ideal amount of sealing pressure for any batch. The Cannular Pro can be adapted for use with 32 oz Crowlers (Ball 300 can/end). To seam Ball 300 end/lid type oversized aluminum cans you will need to purchase the required Chuck for 1L (32 oz) Crowlers separately (coming soon). The Cannular Pro can also be adapted for use with Tin Plated Steel Cans for food packaging applications. The table spacer is designed to accept these 100mm cans, but you will need to purchase the required 100mm Chuck separately. Operation: The beauty of the Cannular lies in how truly simple it is to operate, and the semi-automatic pro model makes canning beer even easier. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows: Place lid atop the can and place the can on the table spacer Turn the platform lever clockwise to raise the can to the seamer Press the seaming operation button then wait for the can to stop spinning Turn the platform lever counterclockwise to lower the can That's all there is to it! Construction: The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there's no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible.   Power: As noted above, the Cannular comes with a 24V DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. This unit uses the more powerful Pro Model Power Supply, which provides enough power to seam tin plated steel cans as well as aluminum cans.   Why Cans? So why can when you can bottle? There's no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren't just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they're also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There's still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans, on the other hand, form a much better seal that can prevent these issues. Of course, it's important to make sure that the can is purged of oxygen before being filled, and that the can lid is sealed atop foam to eliminate oxygen from the headspace. Aside from all the "sciency stuff", cans are just plain safer. Take your beer backpacking, camping, or poolside and rest assured that broken glass won't ruin your day!   Specifications: Power: 250W 24V DC Rated Speed: 3300 RPM Gearbox Ratio: 9.8 : 1 Dimensions: 16" L x 9.5" W x 21" H Weight: 40 lbs Splash guard not included Max Can Height: 7.75" (197mm) Please note the pictured splash guard is not included with the seamer. Please see CAN106 to add the splash guard to your order. Please note: When you receive your cannular the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans when using only Can Fresh brand cans. We recommend testing at least 4 cans to verify the calibration. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular's test show that a minimum 0.4mm (.015") actual overlap is needed to seal to 90 PSI. The proper table tension takes a little practice and you can expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment. KegLand Part Number: KL15769 Cannular Compact Semi-Auto Canning Machine | User Guide  

Read more less

Stop leaving clean, perfectly good, wine or beer in your tank and always drain from the perfect height with our tri-clover style rotating racking arms. Remove your existing tri-clamp butterfly valve and place this rotating racking arm between the tank and your valve. When it is time to rack off slightly loosen the clamp nearest the tank and use the built-in handle to rotate to just about the lees level. A white rotatable gasket is placed between the welded in tank fitting and this rotating arm. Because the micro finish of the gasket is hard and slippery it allows the rotating arm to rotate in place. A standard black EPDM gasket is placed between the rotating arm and the butterfly valve and is always kept completely tightened. The length of the arm after the elbow is 10.5" allowing you to draw from roughly 8" above or below the valve level. The arm measures 9.5" from the TC fitting to the elbow. We suggest you assemble the rotating arm and butterfly valve in such a way that the arm is pointed in the same direction as the handle on your butterfly valve. In this manner you always know how the racking arm is positioned in your tank. 1.5" tri-clamp Polished finish Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Dual headed can filler compatible with carbonated and still beverages Programmable fill height accurate to +/- 1mm for consistent fills with every operation Timed CO2 purging takes place automatically to remove oxygen before each fill The only filler model in this price range that can be set on a table and includes a drip tray Hardware included to mount the filler to your wall if preferred Set up takes only a few minutes with a simple push-button programming interface Adjustable height—designed to fill cans of any size up to 32 oz Crowlers Stainless steel construction throughout with self-draining drip tray Just like the two-headed dog of Greek mythology, Orthos, this dual-headed can filler will perform like a beast in your canning line, doubling your fill rate and taking the stress out of canning day. Operation Programming the fill height and CO2 purge time is quick & easy and only requires pushing a single button to program your settings on either fill head. Once your settings are locked in, the LED ring will give you the green light to procced and filling and purging will execute automatically with a single push of the button. The Orthos Dual Head Can Filler utilizes an aero-grade pressure sensor to measure the height of the fill and is accurate to +/- 1mm for remarkably consistent fills each and every time. Construction We have designed the Orthos Filler to be a showcase for your taproom or home brewery, featuring a heavy stainless steel case and the necessary hardware for wall mounting or table use. The Orthos can be easily adjusted to fill any size can up to 32 oz Crowlers, and if need be, you can have two different style cans filling at the same time. The drip tray will help catch any potential spills throughout the filling process and features a drain that can be routed to a collection bucket or floor drain. Cleaning The cleaning process is just as easy as the filling process! Just attach a keg of water or beer line cleaner and run a fill cycle to clean out the product from the machine. The beer flows seamlessly through pinch valves, eliminating any internal cavities that need to be cleaned. The drip tray is conveniently removable for a quick wash after each use. When it's time for maintenance, simply swap out the beer tubing! Includes: Fittings / tubing to connect to 8mm Duotight inputs (1) 8mm Duotight Tee Fitting (DUO1090) (3) 8mm Duotight Elbow Fitting (DUO128) (3) 5.5 ft. Length of 8mm OD EVABarrier Tubing (D1717A) Duotight In-line Regulator (D1047) Wall Mount & Feet Drip tray You May Also Need: A keg of beer and connections for sanke or ball lock Sanke: (2) 8mm Duotight Beer Thread Adapters (DUO104) Ball Lock: 8mm Gas In & Bev Out Duotight Ball Lock QDs (DUO150 / DUO151) 8mm OD EVABarrier Tubing (D1717) Dual Body CO2 Regulator (D1083) OR (2) Single Body CO2 Regulators (D1077) Two pressure settings are needed. One to set the fill speed and the other to set the purge speed Exceeding 3 PSI makes the purge turbulent and will mix air back into your can We recommend KOMOS Regulators which include 8mm Duotight adapters for the output Features: Dual heads to fill two cans simultaneously Stainless steel case Consistent Fills Drip tray, wall mount, & feet included High fill accuracy Easy programming Fills still or carbonated products Timed purging Beer and CO2 inputs are 8mm Duotight Specs: Wall Mounted: 14-3/4" H x 7-7/8" W x 3" D Table Mounted: 12 oz can: 15-3/4" H 32 oz Crowler: 17-3/4" H 7-7/8" W x 8" D 18V Power Supply

Read more less

Dual headed can filler compatible with carbonated and still beverages Programmable fill height accurate to +/- 1mm for consistent fills with every operation Timed CO2 purging takes place automatically to remove oxygen before each fill The only filler model in this price range that can be set on a table and includes a drip tray Hardware included to mount the filler to your wall if preferred Set up takes only a few minutes with a simple push-button programming interface Adjustable height—designed to fill cans of any size up to 32 oz Crowlers Stainless steel construction throughout with self-draining drip tray Just like the two-headed dog of Greek mythology, Orthos, this dual-headed can filler will perform like a beast in your canning line, doubling your fill rate and taking the stress out of canning day. Operation Programming the fill height and CO2 purge time is quick & easy and only requires pushing a single button to program your settings on either fill head. Once your settings are locked in, the LED ring will give you the green light to procced and filling and purging will execute automatically with a single push of the button. The Orthos Dual Head Can Filler utilizes an aero-grade pressure sensor to measure the height of the fill and is accurate to +/- 1mm for remarkably consistent fills each and every time. Construction We have designed the Orthos Filler to be a showcase for your taproom or home brewery, featuring a heavy stainless steel case and the necessary hardware for wall mounting or table use. The Orthos can be easily adjusted to fill any size can up to 32 oz Crowlers, and if need be, you can have two different style cans filling at the same time. The drip tray will help catch any potential spills throughout the filling process and features a drain that can be routed to a collection bucket or floor drain. Cleaning The cleaning process is just as easy as the filling process! Just attach a keg of water or beer line cleaner and run a fill cycle to clean out the product from the machine. The beer flows seamlessly through pinch valves, eliminating any internal cavities that need to be cleaned. The drip tray is conveniently removable for a quick wash after each use. When it's time for maintenance, simply swap out the beer tubing! Includes: Fittings / tubing to connect to 8mm Duotight inputs (1) 8mm Duotight Tee Fitting (DUO1090) (3) 8mm Duotight Elbow Fitting (DUO128) (3) 5.5 ft. Length of 8mm OD EVABarrier Tubing (D1717A) Duotight In-line Regulator (D1047) Wall Mount & Feet Drip tray You May Also Need: A keg of beer and connections for sanke or ball lock Sanke: (2) 8mm Duotight Beer Thread Adapters (DUO104) Ball Lock: 8mm Gas In & Bev Out Duotight Ball Lock QDs (DUO150 / DUO151) 8mm OD EVABarrier Tubing (D1717) Dual Body CO2 Regulator (D1083) OR (2) Single Body CO2 Regulators (D1077) Two pressure settings are needed. One to set the fill speed and the other to set the purge speed Exceeding 3 PSI makes the purge turbulent and will mix air back into your can We recommend KOMOS Regulators which include 8mm Duotight adapters for the output Features: Dual heads to fill two cans simultaneously Stainless steel case Consistent Fills Drip tray, wall mount, & feet included High fill accuracy Easy programming Fills still or carbonated products Timed purging Beer and CO2 inputs are 8mm Duotight Specs: Wall Mounted: 14-3/4" H x 7-7/8" W x 3" D Table Mounted: 12 oz can: 15-3/4" H 32 oz Crowler: 17-3/4" H 7-7/8" W x 8" D 18V Power Supply

Read more less

This kit includes the Tin Can Chuck Adapter at no extra cost, allowing you to seamlessly seal tin-plated steel cans (100mm diameter) right out of the box. The Cannular comes ready for aluminum cans, but this adapter is essential for tin cans. Get everything you need to start sealing cans for food applications. This kit includes the Cannular Pro Semi-Auto Canning Machine, a 110V Power Supply, and a Splash Guard Accessory. Built with a 304-grade stainless steel platform and a hammered sheet metal body, the Cannular is designed for safe and reliable operation in wet environments. Stainless steel screws and rubber feet add to the durability and stability. With only three simple steps, the semi-automatic operation makes canning quick and efficient. Just place the lid, raise the can, press the button, and lower the can. While the Cannular is ready for 12oz and 16oz aluminum cans, the included Tin Can Chuck Adapter expands its capabilities to seal robust tin-plated steel cans, ideal for preserving a variety of food products. Everything you need to start seaming Tin Cans for food applications with the Cannular Pro can seamer. This kit includes the Cannular Pro Semi-Auto Canning Machine, 110V Power Supply, Splash Guard Accessory, and we've included the Tin Can Chuck Adapter for free!. Please note: the Cannular comes ready for sealing 12 oz and 16 oz aluminum cans as standard. The Tin Can Chuck must be installed before seaming tin plated steel cans. Home canning is a great method for preserving homemade food products and storing fresh fruits and vegetables from the garden. Tin plated steel cans are a robust packaging option, and include easy-open pull-ring lids that do not require a can opener. Just lift the ring pull and tear off the lid of the can. These cans are suitable for a diverse range of food or non-food products such as meat, beverages, oil, chemicals, fruit, and vegetables.   Steel cans are a great option for food storage containers, as they are stronger than plastic options and far less fragile than glass mason jars. Due to the robustness of the container, sealed cans won't break from falls off the counter and they will protect the product in transit and prevent leakage or loss. They offer 100% barrier protection against light, water, and air -- not only protecting the quality of your food products but also extending their shelf life. Operation: The beauty of the Cannular lies in how truly simple it is to operate, and the semi-automatic pro model makes canning beer even easier. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows: Place lid atop the can and place the can on the table spacer Turn the platform lever clockwise to raise the can to the seamer Press the seaming operation button then wait for the can to stop spinning Turn the platform lever counterclockwise to lower the can That's all there is to it! Construction: The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there's no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible. Kit Includes: Cannular Pro Can Seamer 110V Power Supply Splash Guard Tin Can Chuck for 100mm diameter cans Cannular Pro Specifications: Power: 250W 24V DC Rated Speed: 3300 RPM Gearbox Ratio: 9.8 : 1 Dimensions: 16" L x 9.5" W x 21" H Weight: 40 lbs   Please note: When you receive your cannular the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular's test show that a .4mm (.015") actual overlap is all that is needed to seal to 90 PSI. The proper table tension takes a little practice and expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment. For more information on can seaming, check out this site here. Cannular Compact Semi-Auto Canning Machine | User Guide

Read more less

Everything you need to start seaming 32 oz Crowlers with the Cannular Pro can seamer. This kit includes the Cannular Pro Semi-Auto Canning Machine, 110V Power Supply, Splash Guard Accessory, and Crowler Chuck Adapter. The Cannular Pro is a semi-automatic can seamer that is easy to use, reliable, and beautifully simple. Please note: the Cannular comes ready for sealing 12 oz and 16 oz cans as standard. The Crowler Chuck Adapter must be installed before seaming 32 oz Crowlers (Ball 300 can/end). Whether you're a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you'll find. The Cannular only requires one person to operate, and each can takes roughly 3 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs. The Cannular Pro's table spacer is specially designed to work with all standard 202 cans, including the industry favorite 16 oz (473ml) and 12 oz (355 ml) cans, as well as our 500ml (16.9 oz) and 330ml (11.2 oz) Can Fresh Aluminum Cans. Unlike the manual model that requires a secondary table spacer for use with 330ml cans, the Pro model features an adjustable platform, allowing you to raise or lower the table spacer depending on what size can you're seaming. It is necessary to adjust the table height to ensure you have the appropriate amount of pressure applied when the can lift is raised. Operation: The beauty of the Cannular lies in how truly simple it is to operate, and the semi-automatic pro model makes canning beer even easier. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows: Place lid atop the can and place the can on the table spacer Turn the platform lever clockwise to raise the can to the seamer Press the seaming operation button then wait for the can to stop spinning Turn the platform lever counterclockwise to lower the can That's all there is to it! Construction: The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there's no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible. Kit Includes: Cannular Pro Can Seamer 110V Power Supply Splash Guard Crowler Chuck Adapter Cannular Pro Specifications: Power: 250W 24V DC Rated Speed: 3300 RPM Gearbox Ratio: 9.8 : 1 Dimensions: 16" L x 9.5" W x 21" H Weight: 40 lbs   Please note: When you receive your cannular the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular's test show that a .4mm (.015") actual overlap is all that is needed to seal to 90 PSI. The proper table tension takes a little practice and expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment.   Cannular Compact Semi-Auto Canning Machine | User Guide  

Read more less

Automated Filling System: Fill any beverage into any bottle, can, jar, or glass automatically with this internet-connected, RAPT-enabled Cannular Can and Bottle Filler, offering a more sanitary and user-friendly experience than competitors. Integrated Pinch Valve and Regulator: The pinch valve allows easy removal of the beer line for cleaning, while the integrated regulator eliminates the need for an external regulator, preventing damage from high-pressure gas sources. OLED Digital Display and WiFi Connectivity: The OLED display simplifies calibration and allows real-time adjustments, while WiFi connectivity to the RAPT.io portal logs usage data and enables remote management of settings and profiles. Versatile and Multi-Purpose: With adjustable stainless steel tubes and a height range suitable for bottles up to 11.8" and cans up to 10.6", this filler can handle still or carbonated beverages, making it ideal for various containers including wine bottles, beer cans, and more. Low Dissolved Oxygen (DO) Pickup: The filler effectively purges oxygen from the container, ensuring substantially lower dissolved oxygen levels, which enhances the quality and longevity of your beverage. Fill any beverage into any bottle, can, jar, or glass automatically with this internet-connected, RAPT-enabled, Cannular Can and Bottle Filler. Featuring two adjustable stainless steel tubes, the Cannular Filler will use one to purge oxygen out of the vessel and then use the second one to fill the vessel to a precise level based on an internal pressure sensor. OLED Digital Display The OLED display makes calibration super easy. It also enables you to keep track of filling speed, number of cycles/fills, purge time, fill height, and also enables you to make on-the-fly adjustments to your filling requirements so you can conveniently tweak the settings while filling. Integrated Ball Lock Connectors The integrated ball lock connectors allow you to quickly attach your beer and gas ball lock disconnects. We recommend the use of the Duotight Ball Lock Quick Disconnects in Gas and Liquid to connect to these inputs and outputs. Integrated Pinch Valve The integrated pinch valve is one of the things that makes this unit far superior to other filling machines. The pinch valve enables you to easily remove the beer line for cleaning so the stainless tube, silicone hose, and yellow ball lock cap removes completely and can be put into the dishwasher or cleaned in the sink. The pinch valve is mechanically simple and therefore reliable. It is not subject to small particles like hops getting stuck in the device and eliminates the need for pre-filtration. It simply pinches down on the silicone tube to shut off the flow. This design also enables laminar flow that reduces foaming. The pinch valve improves reliability, makes it easier to operate, and a piece of cake to clean. Integrated Regulator Other filling machines require an external regulator that may need to drop the pressure lower than your normal keg dispensing pressure. Unlike these other fillers, this filler has an integrated regulator which saves time and setup costs. This integrated regulator means you will not damage your machine by accidentally connecting it to a high-pressure gas source. You can hook up your gas line without the need for another external regulator or to fool around with your gas supply at all. Just set the integrated regulator once during setup and forget about it. Multi-Purpose The long stainless tubes and adjustable height make this device useful for pretty much any bottles up to 11.8" (30cm) high or cans up to 10.6" (27cm) high. It can also be used for still or carbonated beverages, so this device is useful for wine bottles, beer cans, champagne, crown seal bottles, and pretty much any other bottle/can/vessel that has a neck opening greater than 0.59" (15mm). It can also be used for filling glasses, jars, or other vessels. Fill Profiles Some other machines require a full calibration to change from one vessel type to another. This machine allows you to pre-save fill profiles depending on what you are doing. Save a filling profile for your 12 oz cans and then save a different filling profile for your 750mL wine bottles. Use our pre-saved presets or alternatively make your own fill profiles with different purge times and fill height. These are also synced with the RAPT.io portal so you can save profiles and share them with friends or deploy them to several other devices. RAPT.io Connected (via WiFi) As well as all the features above, this filler connects to your WiFi and keeps track of your Cans Per Minute (CPM), fill speed, and even temperature (if you purchase the external Instant Read Temperature Probe separately). It will log all usage information so you can keep track of how your machine is running or even keep track of your staff to make sure they are cycling the machine at an acceptable rate. The connectivity to the RAPT.io portal will enable you to more easily change settings, update profiles, and keep track of your fill days so you can historically keep track of how your fill day went and which day you processed each batch. Low DO Pickup The quality and longevity of your beverage are often defined by how well you keep oxygen off your product. This filler purges the oxygen out of the can and will enable you to get substantially lower dissolved oxygen. Wall Mounted Design This type of can and bottle filler has primarily been designed for wall-mounting configuration. This allows you to bring a can or bottle up to the filler from the underside of the unit. To wall mount this unit you can download and print this template. 24V DC Power Supply KegLand Part Number: KL37785 RAPT Can Filler User Guide

Read more less

Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and oversized 2-piece Speidel airlock. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks 26"L x 18"W x 26"H, 11 lbs FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less

This is a 304 stainless steel blow off tube for Ss Brewtech 1/2 barrel Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a relief valve built into the cane. 3" TC gasket and clamp not included.

Read more less

Stop leaving clean, perfectly good, wine or beer in your tank and always drain from the perfect height with our tri-clover style rotating racking arms. Remove your existing tri-clamp butterfly valve and place this rotating racking arm between the tank and your valve. When it is time to rack off slightly loosen the clamp nearest the tank and use the built-in handle to rotate to just about the lees level. A white rotatable gasket is placed between the welded in tank fitting and this rotating arm. Because the micro finish of the gasket is hard and slippery it allows the rotating arm to rotate in place. A standard black EPDM gasket is placed between the rotating arm and the butterfly valve and is always kept completely tightened. The length of the arm after the elbow is 14" allowing you to draw from roughly 10" above or below the valve level. The arm measures 13.5" from the TC fitting to the elbow. We suggest you assemble the rotating arm and butterfly valve in such a way that the arm is pointed in the same direction as the handle on your butterfly valve. In this manner you always know how the racking arm is positioned in your tank. 2" tri-clamp Polished finish Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.

Read more less

This is a 304 stainless steel blow off tube for Ss Brewtech 7 gallon Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a relief valve built into the cane. 3" TC gasket and clamp not included.

Read more less

Replacement tip for 3/8" racking cane. Comes standard on our R340, R360 and R375.

Read more less

Vacuum pump wine bottle filler with 180 bottle per hour filing capacity Automatically starts siphon and shuts off when the bottle is filled Oxygen is evacuated from each bottle before filling Adjustable fill speed to match your preferred pace Fill wine bottles directly from your fermenter, storage tank, or barrel The Enolmatic filler with vacuum pump transfers the wine very gently, and fills your bottles to the perfect level every time. The vacuum pump depressurizes the reservoir, which then pulls your wine through the filler tube and into the bottles. The wine never touches the pump. It is very gentle, consistent, and easy to use. 110V 60 Hz 60 W

Read more less