This stainless steel hop tube is ideal for keeping kettle additions from clogging your pump or heat exchanger, and works perfectly for dry hopping in a keg or wide-mouth fermenter. Holds approximately 5 oz of pellet hops, allowing some space to permit full extraction of the hop oils. The stainless chain makes it the perfect partner to our Corny Keg Lid with Welded Tab. Hang the tube inside your keg for post fermentation hop, fruit, wood chip, or spice additions. When it's time to remove the hops/adjuncts simply pull the tube out. Works great for timing exactly how long your beer sits on the hops, oak, or other flavoring addition. 2.6" diameter 11.8" tall Made from 304 stainless steel Kegland Part Number: KL05210
Connect two ball lock homebrewing kegs together via their ball lock our fittings. Handing for moving sanitizer or beer from one keg to the next. We often use this fitting when we have a big party where we dixie chain kegs together. For example if you made 10 gallons of pale ale you can use this jumper to connect the two kegs so that all 10 gallons can pour at once.
The Most Essential Barrel Accessory!
Keep your wine safe and ensure the integrity of your barrel with this top-up system. We're all familiar with the fact that barrels lose volume over time - in fact the evaporation that leads to this is one of the benefits of aging wine in a barrel. However, let it go too far with out topping up and the excess headspace in the barrel will cause your SO2 levels to drop and open the door to oxidative or bacterial spoilage. That is why it is essential to keep your barrel topped up at all times!
Our MoreWine! Topping system is based around the common 5 gallon Cornelius ("Corny") Keg. These kegs are relatively inexpensive, simple to work with and easy to get parts for. 5 gallons of topping wine is about the right amount to work with a new 30 gallon barrel. The best part about topping up your barrel from a keg is that the wine that remains in the keg is always protected by a layer of the inert gas that you used to push the previous wine out, so it doesn't matter how long the wine sits in the keg!
This kit includes the Argon/Nitrogen tank and regulator for you to push the wine out of the keg, and all the tubing and other parts that you need to make it work, as well as comprehensive instructions.
Kit Includes:
New High Quality Italian 5 gallon "Corny" keg
20 cu. ft. Argon/Nitrogen tank
Argon/Nitrogen regulator
Tubing and hardware to connect the gas regulator to the keg
Tubing and hardware to dispense wine from the keg into your barrel
Cleaning brush for your dispense line
Comprehensive instructions for assembly and use
A quick and easy draft tubing setup for dispensing your homebrew!
This Beer Line Assembly has everything you need to hook a line to your keg and pour. Great for when you're out serving brew on the go or for parties. Includes the ball lock beverage-out quick disconnect, 5 feet of 3/16" beverage tubing, a hand held faucet, and two hose clamps.
Unique Core Puncturing / Actuator results in zero gas lost from screwing in CO2 cartridges
Interchangeable ball lock disconnect orientations. 45° for plastic QDs or 90° for stainless QDs
6.5mm Duotight compatible hose barb
Swappable mini pressure gauge remains well protected within solid cast brass regulator body
Corny-style 65psi Green PRV for added safety and manual depressurizing
Switch from 16g to 74g CO2 cartridges with an adapter fitting
The new Core 360 Mini CO2 Regulator from KegLand represents a huge jump forward in the mini regulator market. After much feedback on how to make mini regulators more compact, sturdy and efficient, the brilliant engineers at KegLand have come up with this mini-beast.
The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge.
Heavy Duty Construction
Starting with the body of the regulator, this unit is made from chrome-plated solid cast brass which means it will stand up to quite a bit of abuse. Unlike most mini regulators, the pressure gauge on the Core 360 is safely recessed in the regulator body, so if you ever drop it there is little chance that you'll damage the gauge. What's more, the gauge is removable, so you can swap it out with another mini gauge with a pressure range that better suits your application.
Unique Cartridge Connection
What really sets this unit apart from other mini regulators is the way in which you insert a CO2 cartridge. A common complaint with these types of regulators is that you can lose a lot of gas from the cartridge just from threading it into the regulator. There's that brief period where the cartridge has been punctured but you haven't fully threaded it into the regulator to form a seal. If you're not quick enough, this can result in a significant amount of lost gas. The Core 360 has a unique design feature where inserting the cartridge is a 2-step process. First you fully thread in the cartridge so it forms a seal before it's opened, and then you screw down the actuator pin to release gas into the regulator. Simple and effective.
Furthermore, the Core 360 Mini Regulator is designed to be compatible with both 16g and 74g cartridges. Out of the box it will be ready to accept 16-gram 3/8"-24 UNF threaded cartridges. But with a simple adapter you can switch to 74-gram 5/8"-18 UNF threaded cartridges.
Interchangeable Gas Outlet
Another feature we haven't seen before on a mini regulator is the interchangeable gas outlet. You can use the swivel nut connection to directly attach the regulator to a flare ball lock disconnect, or you can swap to the 6.5mm Duotight-compatible barb and connect draft tubing. This is a great option if you want to dispense a commercial keg without the need of a ball lock to sanke coupler adapter.
The regulator also has two outlet options at either a 45° or 90° angle which makes this the ideal mini regulator regardless of whether you use plastic or stainless steel ball lock disconnects.
SodaStream Compatible
If you remove the 16g cartridge bushing, you'll find TR21-4 female threads for use with SodaStream gas cylinders. These can be a great option for mobile dispensing as they provide much more gas than a CO2 cartridge and are more easily transported than a full CO2 tank.
Includes:
KegLand Core 360 Mini Regulator
6.5mm Duotight-compatible hose barb
Female Flare Fitting for MFL Disconnects
Port end cap
65psi Green PRV
SodaStream to 16g thread bushing
KegLand Part Number: KL20404
Warning: Do not overtighten onto your cylinder. It is recommended that you use a spanner to hold the neck of your SodaStream cylinder while attaching and detaching the Mini 360 Core Actuator Regulator.
Mini 360 Core Actuator Regulator | User Guide
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.
Nothing looks quite as nice as beer pouring out of a shiny stainless steel draft tower. These are the same tower kits included with every KOMOS Kegerator, featuring Intertap stainless steel faucets, EVABarrier draft tubing, and Duotight push-to-connect fittings for easy assembly. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great!
Stainless Intertap Faucets and Towers
These kits come with Intertap faucets mounted on a brushed stainless tower. Intertap faucets are the newest, most advanced, forward sealing, beer faucets on the market today and will work perfectly for years. Forward-sealing means that while in the closed position the faucet will keep beer inside the body instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Intertap faucets feature a modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
Includes:
Stainless steel draft tower
Intertap faucet(s)
Stainless steel faucet shank(s) with Duotight tailpieces
EVABarrier gas and beverage tubing
Beverage line measures 4mm ID x 8mm OD
Gas line measures 5mm ID x 8mm OD
Draft tower mounting screws
Faucet wrench
1-3 Tap Tower Dimensions:
13.4 in. tall (without faucets)
3 in. tower diameter
4.4 in. base diameter
4 Tap Tower Dimensions:
16 in. tall (without faucets)
4.5 in. tower diameter
Interior mounting holes (does not include bottom collar)
The Pluto Beverage Gun is the ultimate hand held beer tap! If you have been dispensing your draft beer out of a standard picnic tap, it's time to upgrade. Definitely one of the coolest draft beer taps that we've seen, this Pluto Beverage Gun is made from nylon and stainless steel. The body is plastic, while the barb, piston, and spring are all stainless. Comes with a 1/4" duotight-compatible barb perfect for use with EVABarrier draft line. You will need either the 8mm x 6.5mm or 9.5mm x 6.5mm Duotight reducer to connect the EVABarrier to the Pluto. Kegland Part number: KL00956
This 4-position manifold is generally used in professional applications for keg filling and wort distribution. Made from high-quality stainless steel with 1.5" T.C. connections.
1.5" tri-clamp
22" long x 3.75" tall
Made from 304 stainless steel
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
The most affordable ball lock quick disconnect we offer!
Black color easily identifies the QD for beverage use
1/4" flare thread connection
The black, beverage-out quick disconnect with male flare fitting. Convenient to use, easy to clean.
Find out for yourself why so many brewers prefer to work with flared keg fittings. Because the fitting-tubing junction is threaded, it can be easily disconnected for cleaning without having to clip your line. Also makes swapping between ball lock and pin lock kegs in the same draft system a snap!
Kegland Part Number: KL02974
Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends!
Smooth malt character, a light hopping, and low alcohol make this a very sessionable Brown Ale
Includes 100% Northern Brewer hops
Estimated ABV: 4.5%
Estimated IBUs: 26-30
Makes 5 gallons of finished beer
The Brewing Network has become THE number one source for brewing information on the web. Their flagship show, The Sunday Session, was the first live show about homwebrewing and craftbrewing on the internet. Chad Moshier, the stations producer, created this brown ale as an easy-drinking session beer, and became a cult favorite on the show. Chad relocated to California from Connecticut, and hooked up with Justin, the founder of The Brewing Network. While Chad had tried homebrewing before and "didn't have much luck at it", he jumped right in and has brewed every week for the last three years! Chad says, "I enjoy brewing all styles but have a soft spot for hoppy beers, there is nothing like sharing and enjoying your own brew at home!" We think he's on to something ...
Makes 5 gallons
Estimated Original Gravity: 1.045-50
SRM (Color Range): 29
IBUs: 26-30
Estimated Alcohol Percentage: 4.5%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
Replacement keg posts (body connects) for ball lock homebrew kegs. Gas In side.
This piece is where ball lock quick disconnects attach to your homebrew keg. The Gas In post is identified by the small notches around the base whereas the Bev Out post is smooth. Made from stainless steel.
Comes in a convenient zip lock bag.
Perfect addition when purchasing a new sanke style keg coupler or tap. New taps typically come with the correct fittings for your gas line but not your beverage line. These are those fittings!
Used to connect 3/16" or 1/4" beer line.
To connect 3/16" beer line tubing it is helpful to heat the tubing end in hot water.
Rinse out your pin lock corny keg without disassembling the keg posts and dip tubes
Connect to your garden hose spigot and flush with water with the keg upside down
Quick and convenient way to wash out residue from a spent keg before it hardens
An inexpensive, time-saving assembly for rinsing out your Pin Lock kegs.
You've just finished a keg of your homebrew. Most of us set that keg aside and clean it later when we brew up the next batch. As it sits it gets harder to clean and then we definitely have to disassemble the entire keg to scrub all the parts. Well for years our Metal Shop Manager and lead Product Designer, Darren Schleth, has been using a simple keg cleaner in our R&D brewery to rinse his kegs, while upside down, through the body connects. The keg is instantly rinsed while all the residue is still soft. The keg can then later be soaked with PBW and/or sanitized without having to remove the body connects or poppets. This saves lots of time. As employees at MoreBeer! saw this simple assembly everybody wanted one of their own.
To use: Connect the brass garden hose attachment to a garden hose. Then connect the grey and black quick disconnects to the inlet and outlet body connects on your Pin Lock keg. Remove the lid and turn the keg upside down. Turn on the water. Water risnes through both the inlet and outlet dip tubes completely rinsing the inside of the keg.
Homebrewers know that proper sanitation techniques are critical for creating high quality homemade beverages. BTF Iodophor, an iodine based sanitizer, is a powerful, broad spectrum antimicrobial product that kills a wide range of bugs that are waiting to infect your fermentation. Unlike acid based sanitizers, BTF Iodophor reliably kills yeast, mold, fungus, bacteria, viruses and blood borne pathogens.
BTF Iodophor offers a low cost per use, is gentler on your hands than other sanitizers, and is very low foaming. If used in the correct dilution (very important) it is a no-rinse sanitizer. It is safe to use on all your brewing equipment such as buckets, kegs, tanks, fermenters, bottles, etc. Even if you frequently use a sanitizer, it’s a good idea to have multiple sanitizers on hand especially when working with wild yeasts and bacteria or as a “change of pace” sanitizer.
Directions for 12.5 PPM Brewing Sanitizer Solution:
To Make 1.5 Gallons of sanitizer: Mix 1 tsp BTF Iodophor into 1 ½ gallons cool water
To Make 5 Gallons of Sanitizer: Mix ½ oz (1 Tablespoon) BTF Iodophor into 5 gallons cool water
Allow solution to contact surface for 2 minutes, then air dry.
Iodophor Features:
Kills yeast, mold, fungus, gram positive bacteria, gram negative bacteria, spore forming bacteria, viruses and blood borne pathogens
Use at a rate of 1/2 oz of BTF per 5 gallons
Low foaming
No-rinse at 12.5 PPM dilution (see above)
Non-corrosive and gentle on skin and hands
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in early December.
The BrewBuilt Pressure Pack features a unique floating racking tube that can be used for taking samples, keg transfers, or serving finished beer. This innovative feature draws beer from the top down, which means you’re always pulling the clearest, most sediment-free beer possible. And with the included filter attachment, any floating vegetal matter will be blocked from ever entering the dip tube. Using pressure to draw a sample from the floating dip tube will also eliminate the tiny bit of oxygen that would be injected into your beer every time the traditional sample valve is opened.
Pressure transferring from fermenter to keg is the best way to protect your beer from oxygen when it’s at its most vulnerable state. Kegging could be considered the final hurdle in the brewing process, where limiting oxygen exposure is critical. This could mean the difference between your beer tasting great for months or tasting great for a week. Don’t take any chances. Use the Pressure Pack to keg from the top down and leave sediment behind.
Installs on the 4" T.C. port welded into the lid of the BrewBuilt X-Series Uni Conical. The 1.5" T.C. port on the pressure lid can be used for adding dry hops, installing the CoolStix™ for temperature control, or attaching a T.C. pressure relief valve during pressure fermentations. The welded hook underneath the pressure lid can be used to hang bagged hops or other additions.
If you're interested in fermenting under pressure with the X-Series Uni, we recommend pairing the Pressure Pack with the Pressure Fermentation Kit.
4" T.C. Lid w/ 1.5" T.C. Port
Gas In & Bev Out ball lock posts
Clear Float dip tube
Floating Dip Tube Filter Attachment included
Welded hook for hanging drawstring bags
1.5" tri-clamp, gasket and end cap included
Made from 304 stainless steel
Warning! The BrewBuilt Pressure Pack is only designed to be used with BrewBuilt conicals that feature a pressure relief valve built into the lid. Failure to release pressure in the conical before remove fittings or the band clamp could result in injury or death.
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.
What makes KOMOS Kegerators better than the rest?
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits)
Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components
Stainless steel forward-sealing faucets offer a huge upgrade over common chrome plated brass taps
Choose from the classic stainless model faucet or the upgraded stainless flow control model
Faucets mount to a high-quality stainless steel tower, rather than a cheap chrome plated tower
Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming
EVABarrier double walled draft tubing protects your beer against oxidation
Duotight push-to-connect fittings make assembly a breeze
Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted
The KOMOS® Deluxe Kegerator model features an eye-catching stainless steel exterior and upgraded stainless steel drip tray
The KOMOS Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the single, double, triple, or quad tap configuration, you'll receive stainless steel forward-sealing faucets in either classic or flow control model. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator.
The most eye-catching difference between the KOMOS unit and other kegerators is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. KOMOS positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines.
Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
Forward-sealing Stainless Faucets and Towers
All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will only include the cheapest, standard chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use.
Choose from the classic forward-sealing faucet model or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share. Click here to learn more about the Classic and Flow Control faucet models.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Best Value & Backed by MoreBeer!
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus, you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it.
Feature Summary:
Stainless Steel Air Cooled Tower
NukaTap Stainless Steel Forward-Sealing Faucets
Choose faucet model and number of taps above
Duotight Fittings make connecting draft lines a breeze
Digital Thermostat with wide 26 - 82° F temp range.
Robust KOMOS Dual Gauge Regulator included
CO2 Tank holder mounts on back of kegerator (tank not included)
Efficient and powerful compressor
Stainless steel door, top cover, and side panels
Stainless Countertop Style Drip Tray
Aluminum floor for additional keg support
Includes EVABarrier beer and gas tubing
Beverage line measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line measures 5mm ID x 8mm OD
1 x line of varying length depending on number of taps (2, 2.5, or 3m)
4 Tap model includes uncut rolls of bev & gas line
We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.)
Gas lines can be cut to whatever length best suits your needs
Duotight adapters for draft shank and regulator connections
Duotight tee fittings for splitting gas lines (2, 3, 4 tap only)
You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
For ball lock and pin lock disconnects we recommend DUO106
For commercial sanke keg couplers we recommend DUO104
Available Kegerator covers and "off road" casters for moving over uneven terrain
Detailed instructions on assembly and use
Specifications:
23.75" wide
25" deep
31.5" with CO2 mount
32.5" Tall (fridge only)
35" with Caster wheels
48.75" with tower
51" with Casters and Tower
110 v - 60 hz
0.8 Amp draw
Optimal ambient temperature is 65°F – 80°F
CSA Certified
Internal Dimensions:
19.5" wide
17" deep
16" down the center where compressor sits
28.5" tall
What Fits:
5 Gal. Torpedo Keg - 3
5 Gal. Slimline Torpedo Keg - 4
6 Gal. Torpedo Keg - 3
5 Gal. Megamouth Torpedo Keg - 1
5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4
5.2 Gal. Oxebar PET Keg - 3
5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
(1) 5.16 Gal. Sixth Barrel Keg + (1) 7.75 Gal. Slim Quarter Keg
7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1
15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feature a Guard Rail as seen in the residential kegerator instructions.)
Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
If your home draft system is a mix of ball lock kegs and commercial sanke kegs, having a coupler with ball lock adapters is a huge plus. This allows you to have all your draft lines ending in a ball lock quick disconnect, making it quick and easy to swap lines from sanke keg to ball lock.
Note that the gas-in adapter has a small line cut into the body of the adapter where the bev-out adapter is smooth.
The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port.
D-style sanke coupler
Stainless body
Stainless probe
PRV rated to 4.5 BAR (65 psi)
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Fill at a local welding shop or swap out for a full tank at your local homebrew shop
Made from high-quality aluminum that will never rust like steel tanks
Dispense 18 x five-gallon kegs of homebrew
Go with the larger 10 lb CO2 tank and extend the time between needing to refill or swap for a full tank
This brand new, 10 lb aluminum CO2 tank ships free in the 48 contigous states, and because it is made of aluminum rather than steel you can feel confident that it will never rust. It’s called a 10 lb tank because it holds 10 lb of compressed (liquified) CO2. 10 lb of CO2 is enough to dispense 18 five gallon kegs of homebrew.
All new CO2 tanks are shipped empty and will require either filling or exchanging for a full tank. Most local homebrew shops will stock gas to exchange, and many local welding supply companies can fill tanks on site.
Dimensions: 20.75" Tall x 7" wide.
NOTE: CO2 tanks should always be stored in an upright position.
This handy adapter fits on standard keg couplers with its Female Beer Thread (5/8" BSP) and allows a ball lock connection on the beer side of the coupler. Made from 304 stainless steel.
Kegland Part number: KL00840
Counter top inline keg dispenser that can serve ice cold beer from unchilled kegs Compact and portable. Use anywhere you have access to 110V power Superior cooling capacity. Chill up to 8 gallons of beer, inline, per hour! Fill the reservoir with tap water, or use a glycol solution for optimal performance NukaTap Flow Control Faucets, tap handles, and drip tray included Great for bars, restaurants that need to add capacity These style chillers are how beer is poured in most European cafes If you're looking for a home draft system, but don't have the space for a kegerator or keezer, we've got the answer! The KOMOS KRYO benchtop keg dispenser can serve ice cold beer from unchilled kegs. It's essentially an electric jockey box that chills beer inline as it passes from the keg through the internal draft coils that sit submerged in the glycol reservoir. Simply place it on your counter or benchtop, fill the reservoir with a 20% glycol solution, and hook up your keg to the draft shank bulkheads. In roughly an hour, the reservoir will have cooled down enough that you'll be ready to pour! And thanks to the compact size, the KRYO can easily be transported from your home to the next backyard BBQ, cabin trip, wedding, or virtually any gathering of thirsty people you can think of. For homebrewers this would allow you to keep your refrigerator at fermenation temperatures while always seving your beer ice cold. Glycol Reservoir Although you can fill the reservoir with water only, for optimal performance we highly recommend using a glycol/water mix so you can lower the chilling solution below freezing. You simply won't be able to get your beer as cold if using water only. The sight gauge at the front will let you know if it's time to top up the reservoir, but also functions as a drain. When it's time to move the KRYO from one location to another, drain out the glycol into a sealable container to avoid spills during transportation. The glycol reservoir provides an exceptional amount of cooling power that makes it perfect for servicing small bars or cafes, as well as home use. If you're deciding between this model and the KRYO Nomad, note that peak chilling capacity for this model is approximately 8 gallons per hour, whereas the Nomad can chill up to roughly 2 gallons per hour. NukaTap Flow Control Faucets These stainless steel forward sealing faucets allow you to make instant adjustments to the beverage flow as you pour. A perfect faucet for those who often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Adjust the flow control level to dial in the flow rate and pour perfect pints every time! They also have the lowest thermal mass and best laminar flow design to further reduce foaming issues. Draft Shank Bulkheads The draft shank bulkheads with beer thread allow you to choose the type of fittings and draft line that best suits your needs. We highly recommend EVABarrier draft line and Duotight fittings—the same lines and fittings that come standard with our KOMOS Kegerators. These Duotight Female Beer Thread Adapters will allow you to hook up 8 mm OD EVABarrier, and also work with sanke keg couplers if you'll be dispensing commercial kegs. For homebrew kegs, we recommend Duotight Flare Adapters for your QDs, or if you're starting from scratch, consider the Duotight Ball Lock Quick Disconnects. Includes: (2) NukaTap Stainless Flow Control Faucets (2) Tap Handles Stainless Countertop Drip Tray w/ Removable Grill Features: Chill 8 gallons of beer per hour (based on 68°F ambient) Draft shank bulkheads compatible with Duotight fittings or nut & tailpiece combos STC-1000 temperature controller (reads in °C) Reservoir volume: 4.2 gal Voltage: 110V-120V Current: 0.9A Frequency: 60Hz Dimensions: 19" x 12" x 17.5" (not including faucets / drip tray) CE Certified Reservoir Temp Controller: Follow these steps to adjust the SET temperature on the controller. If using water only, be sure to keep the reservoir temp set at or above 2°C to avoid freezing. With a 20% glycol solution, you can set the temp as low as -2°C. The reservoir volume is 4.2 gallons, so you will only need to purchase 1 gallon of glycol to make a 20% mix. Hold the 'Up" button for 3 seconds until the number is flashing While the number is flashing, press the 'Down' button to decrease the set temperature or press the 'Up' button to increase the set temperature. Wait 3 seconds and the controller will save the setting and return to normal operation mode. Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer.
Vinyl tubing is extremely popular in the homebrewing community for transferring your cooled wort. Thick wall vinyl (PVC) tubing is also great for gas and beer lines in keg systems. 3/8 in ID tubing is typically used in commercial dispensing applications.
Keep the top of your kegerator clean with this stainless steel countertop-style drip tray. Perfect for placing underneath a draft tower or 4 faucets mounted side-by-side. Removable grill for easy cleaning. Features 5 pressed locations for drilling through and plumbing the drip tray for draining.
Features:
Removable grill
Made from stainless steel
19.6" L x 6.7" W x 0.6" D
Kegland Part number: KL13178
High performance primary regulator designed to handle the workload of dispensing from multiple taps without freezing up!
Dual body regulator for setting independent pressure settings—ideal for serving two different beer styles with different optimum carbonation levels
High-pressure and double low-pressure gauges to easily reference CO2 cylinder pressure and the two output pressures
Pressure settings are easily adjusted by hand using the large plastic adjustment knob
CGA320 inlet features a built-in gasket where the unit attaches to the CO2 tank—eliminating the need of replacing fiber washers with each tank swap
Made in the USA. Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment
One-way shutoff valve outlets protect your regulator from backflow and can be turned on/off to stop gas flow without needing to close your tank
When it comes to CO2 regulators, we’ve tried them all. This quality unit by Taprite is our favorite on the market. It’s no wonder this regulator is trusted by so many breweries and beer bars—it represents the best quality at a great price. This dual-body model allows you to send different pressures to two separate kegs from the same CO2 tank!
The things you’ll love about this regulator are:
The large front knobs make pressure adjustment tool-free, easy & fast.
A built-in gasket where the regulator connects to the CO2 tank eliminates the constant replacement of fiber washers every time you change out your tank.
The barbed outlets feature one-way on/off valves which prevent backflow and protect the regulator’s internals.
The gauges are easy to read. The low pressure gauges read from 0 to 60 psi. The optional available gauge cage is the best on the market.
This is the T752HP model, where the HP stands for high performance; it won't freeze up when multiple taps are running at once.
Best of all is the consistent pressure regulation. With many regulators the pressure can 'creep' up over time. This unit holds the pressure rock steady. No drifting.
Built by Taprite, an American company.
These replacement poppets will keep your old kegs holding pressure just like new.
These are the most common poppet that we sell. They will fit nearly every keg out there. Technically they are for Cornelius brand "Spartan" and "Super Champion" kegs. They will also fit Cornelius brand Pin Lock "R" kegs. Each keg uses two.
Brand new ball lock keg—no need to clean out an old, used Coke or Pepsi soda keg!
Dual rubber handles make it easy to grip, lift, and move the keg when full
Rubber base is less likely to damage flooring in your home or kegerator
Made from 304 stainless steel in and commerical-quality FSSC 22000 Certified facility
This brand-new, corny-style ball lock keg features a molded rubber base and dual-handle top for easy handling and stacking. The comfortable grip handles make it easier to maneuver when full, while the rubber base protects both your floor and the keg itself. This durable keg is constructed from high-quality 304 stainless steel and manufactured in an IFSSC 22000-certified facility.
Features:
Ball lock
130 PSI Operating Pressure
5 Gallon (19 L) Capacity
304 Stainless Steel
Produced in an FSSC 22000 Certified Facility
Dimensions:
Height: 25.75 in.
Diameter: 8.75 in.
The KOMOS multi tool is a convenient instrument to keep nearby that is suitable for most of the fittings you'll encounter when setting up or making adjustments to your kegerator or keezer. If you're kegging your brew then you're well acquainted with the many nuts, bolts, and clamps it takes to rig up a draft system. Even small adjustments will often have you walking back and forth from the tool box before the job done. The KOMOS draft tool offers 7 unique functions for tasks including faucet collar adjustments, shank hex nut adjustments, connecting or disconnecting a CO2 regulator and tank, removing Duotight fittings, and, most importantly, removing bottle caps from beer bottles.
The KOMOS multi tool is suitable for most connection adjustments, but if you're adjusting a CO2 regulator nut that has been overtightened, we recommend using a standard Crescent wrench for extra torque.
Functions:
CO2 Regulator Nut Spanner
Shank Hex Nut Spanner
Faucet Coupling Ring Pin Wrench
Flare Swivel Nut Spanner
8 mm Duotight Removal
9.5 mm Duotight Removal
Bottle Opener
Made of stainless steal.
D-Type keg coupler for standard American sanke kegs
All stainless steel with stainless coupler body and stainless keg probe
Pull-to-engage lever handle
Includes 3/8" OD barb for gas inlet
Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment
Made in the USA
The D-Style beer tap is the most commonly-used keg coupler in the U.S. If you’re going to serve commercial draft beer that was made in the US and is dispensed from your standard American sankey keg, this is the style tap you’ll need.
American-made by Taprite, this coupler is constructed from stainless steel and features a lock-down mechanism that produces a satisfying “click” when engaged. Its heavy-duty construction is designed to withstand frequent commercial use, so you know it’ll last for years at home. The 304 stainless body and probe will provide a more reliable life span compared to its nickle-plated counterpart. Features a built-in pressure relief valve for safety.
To dispense beer, gas is pushed into the keg through the tap’s side port and the beer exits through the top port.
The tail piece, hex nut or gasket for dispensing beer out of the top port must be purchased separately. We offer a pre-made kit with a 1/4” tailpiece (D1720B), as well as a range of other tailpiece sizes to match whatever diameter beer line you’re using.
G-Type keg coupler for Anchor Steam and some other European kegs
Pull-to-engage ergo lever handle
Includes 3/8" OD barb for gas inlet
Bass G style keg tap, also known as, keg coupler, coupling, or adapter. Fits Anchor Brewing kegs.
Will also fit:
Abbot Ale
Anchor Liberty Ale
Anchor Porter
Anchor Steam
Bass Pale Ale
Blackthorne Cider
Caffrey's
Fuller's ESB
Fuller's London Pride
Grolsch
Old Speckeled Hen
Rouge
Scottish Tennents
Sir Perry William's
Watney's
Young's
Young's Chocolate Stout
Young's Oatmeal Stout
Young's Ram Rod Bitter
Young's Special London Ale
Serve ice cold beverages from four independent kegs Customize with your preferred faucets and beer shank adapters to suit your specific needs Uniquely designed square draft coils and shank brackets keep the jockey box internals in place so you can easily dump your ice slurry after use The KegLand stainless steel jockey box includes all of the internals needed to serve four beverages on tap. The square shaped draft coils hug the sides of the cooler walls and are secured in place with specially designed shank brackets, allowing you to easily dump out your ice slurry after use without the internals of the jockey box spilling out. Faucets and tailpieces are not included so you can customize the box to your preferred setup. Recommended Accessories: NukaTap Flow Control Faucet (D15841) Duotight Adapter - 8mm x Female Beer Thread (DUO104) EVABarrier Draft Tubing - 8mm OD x 4mm ID (D1717) For Commercial Kegs: KOMOS D-Style Keg Coupler w/ Duotight Adapters (D1526) For Ball Lock Kegs: 8mm Duotight Ball Lock QDs - Gas In & Bev Out (DUO150 / DUO151) You will also need a CO2 cylinder and regulator, as well as a gas manifold or tee fittings to split your gas line to your four kegs. External Dimensions: 22.2" Wide (including handles) 15.9" Deep (including latch system) 16.1" High Internal Dimensions: 18.8" Wide 11" Deep 13.7" High (there is a slight 3/4" recess at the top to fit larger kegs/bottles)
D-Type keg coupler for standard American sanke kegs Stainless keg probe Pull-to-engage lever handle Includes 3/8" OD barb for gas inlet Taprite is one of leading manufacturers of gas regulators and draft dispensing equipment Made in the USA The D-Style sanke keg beer tap is the most commonly-used keg coupler in the U.S. If you’re going to serve commercial draft beer that was made in the US and is dispensed from your standard American sankey keg, this is the keg coupler you’ll need. Made in America by Taprite, this keg coupler features a lock-down mechanism that produces a satisfying “click” when engaged. Its heavy-duty construction is designed to withstand frequent commercial use, so you know it’ll last for years at home. It features a built-in pressure relief valve for safety. To dispense beer, gas is pushed into the keg through the tap’s side port and the beer exits through the top port. The tail piece, hex nut or gasket for dispensing beer out of the top port must be purchased separately. We offer a pre-made kit with a 1/4” tailpiece (D1720B), as well as a range of other tailpiece sizes to match whatever diameter beer line you’re using.
Portable, Inline, Keg Dispensing unit that can be powered via 110V outlet Replaces a traditional Draft Box/Jockey Box with no ice required Differs from the regular Komos Kryo Inline Chiller in that there is no glycol reservoir / The Nomad is liquid-free and easier to transport Can chill up to 2 gallons of room temperature beer, inline, per hour NukaTap Flow Control Faucets, tap handles, and drip tray included Mobile draft dispensing has never been easier with the KRYO Nomad electric keg dispenser. As with a jockey box, beer is chilled inline as it passes from the keg through the internal draft coils which are chilled by the electrically powered solid carbon based heat sink. With a standard 110V outlet, you can serve ice cold beers from an unchilled keg, and unlike the KRYO glycol unit, this model is absolutely liquid-free, making it the ideal choice for mobile draft dispensing. No need to wait an hour for glycol solution to chill, once you power on the Nomad, you'll be ready to go in as little as 15 minutes! Carbon Heat Sink The secret to the KRYO Nomad's incredible chilling capacity and portability is the solid carbon based heat sink. This heat exchange technology requires no liquid whatsoever, so you'll never run into issues with emptying or spilling coolant when you transport this chiller from place to place. It provides roughly 300 watts of cooling power which allows you to chill about 2 gallons of beer per hour. Just be sure to give the unit about 2 minutes to recover for each 16 oz pour. The Nomad is very power efficient, drawing only 60 watts of power when the compressor is running. When idling, the chiller uses only 1.6 watts of power, meaning it it averages only 15 watts of power draw when turned on and periodically cycling the compressor. NukaTap Flow Control Faucets These stainless steel forward sealing faucets allow you to make instant adjustments to the beverage flow as you pour. A perfect faucet for those who often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Adjust the flow control level to dial in the flow rate and pour perfect pints every time! They also have the lowest thermal mass and best laminar flow design to further reduce foaming issues. Duotight Bulkheads Draft lines connect directly to 8 mm Duotight bulkheads located at the rear of the unit. To hook up your kegs to the KRYO Nomad, we highly recommend EVABarrier draft line and Duotight fittings—the same lines and fittings that come standard with our KOMOS Kegerators. 8 mm OD EVABarrier plugs directly into the bulkheads, then depending on what type of kegs you'll be pouring, you can use these Duotight Female Beer Thread Adapters for sanke keg couplers if you'll be dispensing commercial kegs, or for homebrew kegs, we recommend Duotight Flare Adapters for your QDs, or if you're starting from scratch, consider the Duotight Ball Lock Quick Disconnects. Includes: (2) NukaTap Stainless Flow Control Faucets (2) Tap Handles Stainless Countertop Drip Tray w/ Removable Grill Features: Chill 2 gallons of beer per hour (based on 68°F ambient) Duotight bulkheads compatible with 8 mm OD EVABarrier tubing AC Voltage via IEC Plug: 110-120V Max Power Draw: 300W Dimensions: 9.25" x 13.7" x 18.1" (not including faucets / drip tray) CE Certified Temp Controller: Follow these steps to adjust the SET temperature on the controller. Press and release the 'SET' button to enter into the user menu. Press 'SET' will display the value of the target temperature setting. Press the 'Up' or 'Down' button to increase or decrease the set temperature. Press the snowflake icon button or wait 30 seconds and the controller will save the setting and return to normal operation mode. Warning: Do not set the temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
NukaTap faucets offer reduced first pour foam due to low thermal mass
Forward-sealing design prevents beer residue from gumming up the faucet
Unique shuttle design greatly improves laminar flow, improving the pour of carbonated beverages
Compatible with all Intertap faucet accessories and shanks
Matte Black painted finish. See note below.
Nothing looks quite as nice as beer pouring out of a sleek, matte black draft tower. These are the same tower kits included with the KOMOS Kegerator, featuring NukaTap Stealth Bomber faucets, EVABarrier draft tubing, and Duotight push-to-connect fittings for easy assembly. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great!
NukaTap Stainless Faucets and Towers
These kits come with NukaTap Stealth Bomber faucets mounted on a stainless tower with matte black finish. NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. The modular, threaded spout can fit a variety of attachments including a growler filler or stout spout.
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
Includes:
Stainless steel draft tower w/ Matte Black Finish
NukaTap Stealth Bomber faucet(s)
Stainless steel faucet shank(s) with Duotight tailpieces
EVABarrier gas and beverage tubing
Draft tower mounting screws
Faucet wrench
1-3 Tap Tower Dimensions:
13.4 in. tall (without faucets)
3 in. tower diameter
4.4 in. base diameter
4 Tap Tower Dimensions:
13.4 in. tall (without faucets)
4.5 in. tower diameter
Interior mounting holes (does not include bottom collar)
Please note: this is a painted faucet and as such needs to be used, cleaned, and handled with care. Clean the faucet gently by hand and avoid tossing it into a bucket with other draft parts. Excessive soaking in caustic cleaners will damage the finish. For these reasons, we do not recommend the Stealth Bomber faucets for professional settings. If you prefer a stainless steel spout that can take more punishment, the matte black towers are also sold separately and can be paired with the NukaTap Punisher Edition faucet.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The current estimated availability is October.
Thanks to the 70L (18.5 gal) capacity, homebrewers can produce more beer to share or commercial breweries now have a unit that's small enough for pilot testing. It also has a smart controller with built-in wireless connectivity and mobile app integration for step-by-step remote-controlled brewing. The G70² gives you everything you need in one compact package that can be used virtually anywhere.
Please Note - this system comes standard with a NEMA 6-15P plug, and requires access to a 220v-240v power supply.
New Features on the G70²:
The G70² features a perforated grain basket and the sight glass is now integrated into the recirculation pipework. The new basket design provides an improved brewing experience with no top plate or additional pipework required, making for an even more efficient mash and an easier clean.
Perforated grain basket for an improved brewing experience with no top plate or additional pipework required.
Integrated sight glass is now a part of the recirculation pipework for easy volume reading.
70L of innovation, consistency and power have helped to create one of our most compelling systems to date. The inherent strength and safety capabilities of the G70² are matched by its bold, contemporary look and new smart brewing technologies.
From the creators of the original award-winning all-grain brewing system, the Grainfather G70² represents the next level in brewing equipment. We’ve stepped up our game to bring you a smarter brewing system with a larger 18.5 gal capacity, improved design, wireless control, app integration and the same Grainfather signature quality guarantee.
Whether you're a homebrewer looking to raise the stakes or a commercial brewery looking to bring authenticity back to your pilot batches, the G70² is your true brewing companion. It gives you everything you need in one compact package that can be used virtually anywhere.
Features:
Two-stage false bottom. The conical base allows a false bottom with an inner collar to sit in the recess of the base. Early testers used 21 oz of hops and saw full flow through the pump. This is very effective.
Bespoke 3.2 kWh concealed conical heating element. Make the most of the power available. The element covers around 80% of the base and is mounted using a thermal paste rather than braised. This moves the heat efficiently upwards, minimizing the loss of heat to areas where it’s not needed. As it’s spread in a wide area, hot spots and scorching are very unlikely. Also, most solids settle on the false bottom, so they won’t touch the elements. As it’s concealed, it makes cleaning easy too.
Integrated sight glass for easy volume readings during sparging. Instead of trying to judge the level of your preboil, you can easily sparge until you reach preboil volume. It’s also easy to clean after every brew. The sight glass cap can be replaced with the sight glass cleaning barb to easily recirculate a cleaning solution.
Bottom drain below the false bottom means minimal dead space.
High temperature, high flow rate, food-grade pump. With an 2.1 gal per minute flow rate, you can transfer your brew efficiently and safely. Heavy duty handles on the outside of the G70² unit.
Convenient side entry recirculation. Rather than up and over, the G70² has a built in port on the side of the unit. If the pump is accidentally switched on, the wort will be safely directed back into the boiler.
New rolled edge, mash plates and hop filter for increased strength and easy set up. There’s no more silicone seals, as the plates now have a smooth finish, making them more robust, hard-wearing and easy to install. Compared to the G30, the G70² is wider but not that much taller. Comparatively, the draining is still quick from the basket and there’s less likelihood of stuck sparges as the draining surface area is bigger.
Safety aspects including locked in support ring, heavy duty, no slip brackets on the grain basket and protection from knocking the ball valve open.
Automatic heat sensors and safety cut-out for dry boil protection.
Color LCD controller screen with magnetic mounting for easy viewing from all angles and manual control.
Glass lid with handle.
Ball valve for sampling/draining.
This runs in line with the pump so it’s particularly helpful when draining the cleaning water. The water runs out quickly, emptying the unit in no time.
Huge Wort Chiller included. Despite the volume being more than double, cooling times remain around the same as the G30 thanks to a more powerful pump, efficient false bottom and bigger wort chiller to match the wider unit.
The large size means it needs to be positioned away from the G70², however this is made easy with longer silicone tubing attached as standard.
Lifting bar included with winch lifting hook. Use the bar for a two person lift or with a stable winch system for individual brewers to lift the grain basket.
Large dual-stage hop filter provides a large surface area to allow for a hopping rate of up to 3.3 lbs, which also reduces pump load and blockages.
Robust stainless steel body and excellent build quality.
Specifications:
304 Grade stainless steel body
220 - 240V
18 Gal Capacity
Max Grain Bill: 35 lbs
Min Grain Bill: 18 lbs
Powerful high flow pump: 15W
Convenient, easy, and simple – just the way cleaning should be. Never guess about how much cleaner you should be using with Craft Meister Keg & Carboy Cleaning Tablets, the easiest way to clean your dirty gear. Just fill the dirty keg or carboy with hot water, add Tablets and let them do the work for you! Similar to laundry detergent pods and dishwasher tablets, these handy Tablets are not only easier to use than bulk powder, they may be more cost effective over time by ensuring you use the correct amount of cleaner every time. Keg & Carboy Cleaning Tablets are a mix of powerful alkaline and oxygen detergents providing a one-two punch to knock out soils and build-up. Safe for use on glass, plastic, and stainless steel. Stir lightly to dissolve tablets. Use a brush or repeat for stubborn soils. If you are looking for a cleaner that works in cold water, or where you want it to sit overnight, we recomment you check out Craftmeisters Alkaline Brewery Wash. Directions: Carboy cleaning: Fill carboy with HOT water Add 2 tablets per 3 gallons of water For heavy soils, use 1 extra tablet per carboy or soak longer (up to 24 hours) Soak for at least 60 minutes Rinse thoroughly, then sanitize Keg cleaning: Fill keg with HOT water Add 1 tablet per 3 gallons of water Soak for at least 60 minutes Rinse thoroughly, then sanitize
This adapter can be installed on the Core 360 Mini Regulator from Kegland in order to use 74 gram CO2 cartridges. Use a crescent wrench to remove the stock adapter piece for 12 gram cartridges and simply screw in this adapter with 5/8-18 UNF female threading. Switching to 74 g cartridges will allow you dispense 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required. TR21-4 Male Thread x 5/8-18 UNF Female Thread Adapter only. Regulator and CO2 cartrdige sold separately. KegLand Part Number: KL2041
