Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
MoreBeer!'s Patent Pending sparge arm design is the perfect addition to almost any all grain setup! This sparge arm assembly is made completely of stainless steel and silicone, and has two adjustment points. One of these will help to hold the sparge arm against your kettle, while the other allows you to move the sparge arm up or down inside the kettle to accommodate different amounts of grain. These adjustment knobs are very easy to hand tighten and loosen, meaning no tools are necessary. Excellent for sparging as well as recirculating your mash in a RIMS or HERMS system!
To use, simply install on your kettle wall, tighten down the stopper bumper to hold the sparge arm in place, adjust the height of the bottom disc to be right above your grain bed but below the mash tun's water level, and adjust the flow level using the included ball valve. This unit will not include a barb or quick disconnect on the inlet of the ball valve, as every brewery is different. Please choose an inlet attachment from the sparge arms recommended items. Note - This sparge arm will not fit on most coolers. Make sure to check out the video in the video tab below.
Features
100% stainless and silicone construction
Two adjustment knobs make it extremely universal
Included ball valve allows you to increase or decrease the flow rate during sparge or recirculation
Included check ball will prevent back flow
Can adjust from the top of your kettle to 12-13 inches down into your kettle
A single, large diameter outlet port trickles onto a stainless disc, which distributes sparge water gently and evenly. This port is also much easier to flush out and keep clean than many other sparge assemblies with multiple small holes that grain gets stuck in during recirculation
Stainless tube measures 18.5" from the top to the bend, and 8.5" from the bottom to the center of the distribution disc.
Can be mounted on a lip that is up to 7/8" wide
Has a 1/2" FPT ball valve
Designed to offer a sturdy connection point when using medium-heavy stills or off-center steam condenser units. To attach an AlcoEngine Still Top, remove the locking ring and gasket, replace the gasket with this single sided bead seal, pass the bottom threaded portion of the still through the ferrule, and secure in place with a 2" tri-clamp.
Sized for 35L BrewZillas and DigiBoils.
Compatible with the AlcoEngine Copper Pot Still and Copper Reflux Still and the BrewZilla Steam Condenser.
Installing AlcoEngine Still:
Remove the bottom nut and seal from the column
Place the single sided bead seal on the lid's tri-clamp ferrule (beaded side facing down)
Pass the threaded bottom section of the column through the ferrule
Secure in place with a 2" tri-clamp
The column's bottom nut and seal are not needed
KegLand Part Number: KL32629
Serious homebrewers want only the best hardware touching their brew to prevent “off” flavors. This beer faucet shank is made from high quality 304 stainless steel.
This shank is sold as a complete kit and ready to install--just add tubing and a hose clamp. It comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. Due to the length of the back nut and collar, the total wall width the shank can bridge once installed is about 2 3/4".
Dimensions:
5-1/4" - Total Length (Tip to Tip)
4-1/4" - Shank Length (Without Nut & Nipple)
3" - Thread Length
2-3/4" - Pass Through Length
Stop lifting buckets, kettles, and fermenters or relying on gravity for transfers!
Brew pumps unlock a world of brewing processes otherwise unavailable—create a return loop for whirlpooling in kettle during post boil hop additions
Stainless steel pump head comes standard—the ideal choice for attaching quick disconnects, camlocks, and other stainless fittings
Built-in flow control valve allows for direct flow adjustment on the pump head and eliminates the need to add an additional ball valve
Corny keg style pull ring PRV makes it easy to bleed the pump head of air bubbles and prime the pump
Tri-clamp pump head can be rotated to your preferred orientation and disassembles quickly for cleaning between uses
Imagine a brewing pump that eliminates cavitation, is easy to clean, has a built in valve, and is quiet. Introducing The RipTide pump from Blichmann Engineering, the first pump designed specifically for homebrewing.
We love this brew pump. Like a brewer wired on coffee, let us rattle off some of our favorite features. First, the pull style relief valve that allows air to exit the pump head so the impeller won't cavitate is a genius addition. Our next favorite feature is the bad-ass, built-in flow control valve so you don't have to add additional ball-valves. While we dont manually clean our pumps very often we like the idea that we can easily do that with the clover clamp style connection. That might be particularly important if you are transferring cool wort where extra sanitation might make a difference. Equally cool is the noise, or lack thereof, when operating. It just wears on you to hear your pump grinding away all day. The RipTide pump isn't silent, but it is much quieter. And to top it all off we like the mounting base and the extra long 9' cord. 9' gets the plug connection a few feet away from where we are brewing and less likely to be exposed to water - a simple upgrade that is really nice. Oh, and we almost forgot the power switch which is always a nice feature on something electric!
All in all this is a no brainer upgrade for the difference in cost.
Features:
Strong rare earth magnets and a curved blade impeller provide 7 GPM and up to 21 ft of lift
Tri-Clamp head disassembles easily for cleaning
1/2" NPT inlet and outlet
Motor is enclosed in a splash proof and super quiet case
Rotatable stainless steel head
Integrated air release vent allows you to easily prime the pump everytime without those frustrating air bubbles and cavitation
Linear flow valve provided for excellent flow control
Power switch on base
10 ft. long power cord with 120V plug
Easily identify gas and beverage lines with color-coded options—LightShield Black for beverages, Transparent Red for gas EVABarrier's double-walled design with a proprietary inner polymer significantly reduces oxidation and CO2 loss, keeping your beer fresher for longer The ultra-smooth, nearly impermeable inner surface of the tubing prevents bacteria and microbes from adhering, ensuring cleaner beer lines The stiff yet pliable EVA outer barrier makes the tubing kink-resistant and ideal for use with push-in fittings like Duotight and John Guest Red is recommended for differentiating your gas lines, but the 5mm ID is the perfect size if longer 10-12 ft. beverage lines are needed Easily identify your gas and beverage lines with color-coded draft tubing. Transparent Red EVABarrier is recommended for gas lines while using LightShield Black for your bev lines, saving you a headache when your draft lines inevitably get tangled up in your draft system. The semi-transparent red outer barrier makes the tubing easy to recognize even with minimal light. If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. If you wish to use the tubing for beverage rather than gas, we recommend using 10-12 ft. per line for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line. With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized. EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 5 mm (13/64") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. KegLand Part Number: KL42741
The construction of braided silicone enables the tubing to handle increased pressure applications. Reinforced silicone offers outstanding resistance to temperature extremes and is made from FDA-sanctioned ingredients. The flexible design and construction of this tubing allows excellent bend radii and permits installation in restricted spaces without impeding flow.
3/8" inner diameter, 5/8" outer diameter
Open mesh polyester braiding incorporated within the wall of silicone tubing
Made from FDA-sanctioned ingredients
Translucent natural color for visual contact with the flow
Able to resist extreme temperature variation: -40°F to 392°F (-40°C to 200°C)
Odorless, tasteless, and inert
Working Pressure: 94 psi
Burst Pressure: 275 psi
Platinum cured
Conforms to FDA CFR 177.2600, NSF
The Blichmann Stainless Steel QuickConnectors are great for a number of different reasons! Not only do they work with all 1/2" NPT (extremely universal), they also come in multiple different sizes and configurations.
Stainless steel and silicone construction
High temp silicone grip provides a cool touch even with hot liquids!
Ribbed grips allow quick comfortable tool-free operation
Silicone o-ring seal is retained for perfect positioning but is easily cleaned or replaced
Adapts all male 1/2" NPT fittings to 1.5 in. TC
Replacement keg posts (body connects) for ball lock homebrew kegs. Gas In side.
This piece is where ball lock quick disconnects attach to your homebrew keg. The Gas In post is identified by the small notches around the base whereas the Bev Out post is smooth. Made from stainless steel.
Comes in a convenient zip lock bag.
Anvil Brewing Equipment brew kettles are as durable as they get, with the 5.5 gal version fitting well on a stovetop and the larger versions sitting nicely on the Anvil high performance burner. This rugged kettle is constructed from high quality materials and is designed for a lifetime of demanding use.
Standard Features Include:
-Heavy 18 gauge 304 stainless steel with reinforced lip for durability and easy cleaning.
-Induction capable tri-ply clad bottom.
-Internal etched level graduations in gal and liters for accurate measurements
-A dual scale F/C thermometer – included standard!
-Solid cast stainless steel handles for comfort and durability – no rivets to leak or harbor contaminations!
-Lid conveniently rests on kettle handle
-Ideal 1.2 height to diameter ratio for optimum brewing performance
-Purpose built stainless steel ball valve with integral bulkhead seal is rock solid, easy to install and disassemble, and will never leak.
-Dip tube drains to within 3/8” of the bottom of the kettle.
Anvil Brewing Equipment provides everything you need in a brew kettle! But if you want more, add a boil kettle strainer for the ultimate in hop and trub filtration or convert your Anvil Brew Kettle to a mash tun with our optional perforated false bottom.
SKU
Size
Kettle ID (in.)
Height (in.)
BE340
5.5
12
11.625
BE341
7.5
12.75
14
BE342
10
13.75
16.75
BE343
15
16
19
BE344
20
17.75
21.25
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Complete assembly for conveniently serving beer out of a pin lock style keg. Commonly used to serve on the go because there is no beer lines to get in the way! Comes with QD faucet adapter, stainless faucet with stainless steel shank, faucet knob and Pin lock beverage out quick disconnect.
Magnetic drive enables you to slow down the flow without damaging the pump—just add a ball valve to the outlet!
T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees
Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use
Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy
Stainless steel head with 1/2" threaded ports to attach your preferred fittings—tri-clamp, quick disconnect, camlock, and More!
The best-selling MKII Magnetic Drive Pump now available with a major upgrade! This unit comes standard with an inline stainless steel pump head that installs on the pump body with a 3" tri-clamp. Compared to the standard "center inlet" pump head, the "inline" flow path can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. And with the 3" T.C. connection, not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use could not be easier—just pop off the tri-clamp, wash out the pump head, and clamp back on.
The MKII is a perfect pump for your system and comes highly recommended for brewers stepping up to all-grain brewing. Rather than schlepping heavy kettles filled with hot liquor or wort around your brewery, or awkwardly stacking them into a 3-tier gravity setup, allow this handy pump to move liquid from vessel to vessel while everything remains in place. The magnetic drive allows you to slow down the flow without damaging the pump. This can be done by attaching a ball valve to the outlet side of the pump, and then you simply open or close the valve to control the flow rate. The pump itself is not self-priming, but priming is super easy thanks to the pull ring PRV which will help ensure the pump head is full of liquid and trapped air is released before powering it on.
Tri-Clamp Pump Head
The T.C. pump head can be removed quickly and easily using the 3" tri-clamp. This means no drivers or power drills are needed to back out the six Phillips head screws that mount the pump head on the standard version of the MKII. Whip the head off in a flash to clear out spent grain, hop material, or clear a blockage. Attaching the pump head with a tri-clamp also allows the head to be rotated at any angle in a full 360-degrees. This makes it easy to configure the plumbing to your unique brewery setup.
Inline Design
An "inline" pump head simply means the input and output are on a straight horizontal line with one another which can make it easier to integrate into your brewery setup. If you're using a 3-vessel horizontal system, the inline pump head will make it easier to keep your hoses neat and tidy compared to pumps heads with a center inlet.
PRV Purge Valve
The corny keg style PRV will make priming the pump a breeze. Simply let bleed the pump head to purge air out before turning the pump on and you'll avoid any cavitation issues. The PRV also acts as a safety so you do not over pressurize your pump head or brewery system.
304 Stainless Steel
The entire pump head is made from 304 grade stainless steel so it's highly resistant to chemicals, heat, and physical abuse. The 1/2" BSP threaded ports can be used to attach barbs, quick disconnects, camlocks, tri-clamp adapters, or any other 1/2" fittings you prefer.
Features:
110V / 60hz
Max Head: 11.15 ft. (3.4 m)
Max Flow: 5 Gal/min (19L/min)
Max Temperature: 248°F (120°C)
360° rotatable stainless steel pump head
1/2" BSP ports
Water resistant casing (not waterproof)
KegLand Part Number: KL27236
If you're brewing on a budget and want the most affordable pump possible, check out the standard model MKII pump. This has been our best-selling pump for years and you can always upgrade it down the road with the standard stainless center inlet head or inline stainless tri-clamp head.
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut.
Tailpieces are available in a range of barb sizes to fit up to your tubing size.
304 stainless steel construction means these pieces won’t rust or harbor bacteria that can ruin the taste of your beer.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
With Duotight adapters you can take your draft system into the 21st century with EVABarrier draft line. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing.
4 mm x 8 mm EVABarrier is our recommended size for short beer lines in the 5-6 ft. range. 5 mm x 8 mm EVABarrier is recommended for longer beer lines in the 10-12 ft. range.
The KOMOS S-style coupler for European kegs can also be purchased bare if you prefer a different connection style.
S-style sanke coupler
Stainless body
Stainless probe
PRV rated to 4.5 BAR (65 psi)
With three places to attach tubing and accessories, this tee gives you the ability to customise your brewing setup.
304 Stainless, 1/2" Female Pipe Thread on all three openings.
2" length x 1.5" width
Type A Camlock Fitting. Male Camlock with 1/2" Female BSP.
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04503
Use this barbed fitting to connect 1/2" ID tubing to a 3" tri-clamp fitting. Works seamlessly with the BrewBuilt X3 Conical's 3" butterfly valve bottom port.
Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place.
3" tri-clamp
1/2" OD barb
Made from 304 stainless steel
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Quality Tri-Clover fitting made from food safe stainless steel.
This is a 1.5" Tri-Clamp fitting with a 1" Barb. Use with 1" ID tubing. Made of quality 304-type stainless steel. 1.5" long stem.
Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 1/4" or 5/16" ID tubing to 3/8" ID tubing. The 3/8" barb is slightly oversized at 10 mm (0.39").
Made from 304 stainless steel.
Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place.
Use this barbed fitting to connect 3/4" ID tubing to a 1.5" tri-clamp fitting.
1.5" tri-clamp
3/4" OD barb
3/4" long barbed section
1-1/8" long stem
Made from 304 stainless steel
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Upgrade your MKII pump with a 304 stainless steel replacement head. Stainless steel is more durable if you are attaching ball valves. Very occasionally the threads on the plastic head that comes standard on the MKII can break if you are using hard to close ball valves that apply a lot of torque. Stainless steel is very robust and will not break, is food grade, and well... stainless. Before you snag the stainless center-inlet head, also consider the stainless inline tri-clamp head. Kegland Part Number: KL03865
Type D Camlock Fitting. Female Camlock with 1/2" Female BSP.
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04473
The Blichmann Stainless Steel QuickConnectors are great for a number of different reasons! Not only do they work with all 1/2" NPT (extremely universal), they also come in multiple different sizes and configurations.
Stainless steel and silicone construction
High temp silicone grip provides a cool touch even with hot liquids!
Ribbed grips allow quick comfortable tool-free operation
Silicone o-ring seal is retained for perfect positioning but is easily cleaned or replaced
Adapts all male 1/2" NPT fittings to 1/2 in. TC
The construction of this reinforced silicone tubing enables silicone tubing to handle increased pressure applications. Braided silicone offers outstanding resistance to temperature extremes and is made from FDA-sanctioned ingredients. The flexible design and construction of this tubing allows excellent bend radii and permits installation in restricted spaces without impeding flow.
1/2" inner diameter, 3/4" outer diameter
Open mesh polyester braiding incorporated within the wall of silicone tubing
Made from FDA-sanctioned ingredients
Translucent natural color for visual contact with the flow
Able to resist extreme temperature variation: -40°F to 392°F (-40°C to 200°C)
Odorless, tasteless, and inert
Working Pressure: 72 psi
Burst Pressure: 217 psi
Platinum cured
Conforms to FDA CFR 177.2600, NSF
Type B Camlock Fitting. Female Camlock with 1/2" Male BSP.
Camlock fittings are the preferred choice for many home and professional brewers alike. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability.
304 Stainless steel construction. 150 psi working pressure.
Kegland Part Number: KL04480
The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects. These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path. O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel.
This is a Male Plug, which can connect to any H501 Series Female Socket. It has 1/2" Male NPT threading for use with any products equipped with 1/2" Female NPT. This QD is equipped with a shutoff valve. When not connected to another QD, this will not allow any flow.
While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages. These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems. The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options.
Features:
LinkTech brand 60PS Series
Equipped with Shutoff Valve
Connections:
Male Plug Quick Disconnect
1/2" MPT
Medical Grade Materials:
Body: High-Strength Polypropylene
Spring: 316 Stainless Steel
O-Ring: EPDM
Operating Pressure: Vacuum to 60 PSI
Temperature Tolerance: -40 to 280°F (-40 to 138°C)
3/8" Flow Path
Interchangeable with CPC - Colder HFC35 Series
Durable 304 Stainless Steel: Corrosion-resistant construction that ensures a lifetime of use without retaining flavors.
Industry-Standard Ball Lock: The universal design makes it easy to find parts and compatible draft hardware.
Manual Pressure Relief Valve: Integrated pull-ring PRV for safe, simple depressurizing and easy dry-hopping.
Protective Rubber Base & Handles: Ergonomic dual handles for easy transport and a vulcanized base to protect floors.
Let’s be honest: no one actually enjoys bottling day. Washing, sanitizing, and capping 50-plus bottles is the tax we pay for great beer—but it’s a tax you can officially stop paying. A Ball Lock Keg is the ultimate upgrade for any homebrewer looking to streamline their process, improve their carbonation control, and finally reclaim their Saturday afternoons.
Why Ball Lock?
In the world of homebrewing, Ball Lock is the undisputed king. Most kegging hardware, disconnects, and draft systems are designed around this standard, making it easy to find parts and swap lines. If you’re looking for a setup that grows with your hobby, this is the foundation you want.
Key Features:
304 Stainless Steel Construction: Built to last a lifetime. It’s corrosion-resistant, easy to sanitize, and won't hold onto flavors from your last batch.
Pressure Relief Valve: The manual pull-ring PRV in the lid makes it safe and easy to depressurize the keg for serving or dry-hopping.
Rubber Handle & Base: The vulcanized rubber bottom protects your floors (and your fridge), while the dual-handle top makes it easy to carry—even when full.
Versatility: While it’s perfect for your favorite IPA, these kegs are also the go-to choice for nitro cold brew, sparkling water, or even homemade soda.
Specs:
130 PSI Operating Pressure
2.5 Gallon (9.5 L) Capacity
304 Stainless Steel
Approx. 14.1" H x 9.2" D
Please Note: Example image shows the 5-gallon keg size. Updated images coming soon.
The KOMOS Deluxe Kegerator model boasts the same features as the standard model with an eye-catching stainless steel extrerior and upgraded stainless steel drip tray. The interior is designed to fit up to four 5-gallon ball lock kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless door and exterior, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless steel door, top cover, and side panels Stainless Countertop Style Drip Tray Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feauture a Guard Rail as seen in the residental kegerator instructions.) Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
Tired of clogged airlocks from your intense and vigorous fermentations? Simply place one end in your stopper instead of your airlock and the other end into a bucket of water or sanitizer and worry no more. Made from stainless steel, making it durable and easy to clean.
Specifications:
Stainless steel
1/2" outer diameter
7/16" inner diameter (approximately)
19" Tall x 7.5" Wide
This heavy-duty mash paddle will rip through your mash tun like slicing through butter with a light saber! Drilled holes provide less resistance when breaking up dough balls. Tig welded and made from 304 stainless steel.
The paddle is 76cm (29.9") in total length with a paddle head measurement of 23cm x 14cm (9" x 5.5").
KegLand Part Number: KL03797
Compatible with either your sanke keg coupler or draft shank and held in place with a hex nut & gasket. This 5/16 in. tailpiece is commonly used with 1/4 in. ID draft tubing for a tight fit.
Comes in a convenient zip lock bag.
This elbow fitting features 1.5" tri-clamp connections at both ends and is made from high-quality stainless steel.
1.5" tri-clamp
90° bend
3.75" tall
Made from 304 stainless steel
ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by our 60-day no-hassle return policy and a one-year warranty from MoreBeer!.
Tailpieces are fittings which connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with collar nut. Tailpieces are available in a range of barb sizes to fit up to your tubing size. Stainless steel construction means these pieces won’t rust or harbor bacteria that can ruin the taste of your beer. This elbow shaped tailpiece helps you fit your tubing runs in tight spaces, requiring just 1-5/8" clearance above the tap or behind the shank. Use with hex nut (D1740). ID - 3/16" OD - 1/4"
