The BrewBuilt X2 Conical Lid comes with one 4" T.C. port and two 1.5" T.C. ports. This is a direct replacement to the lid that comes standard on the X2 Uni, but X1 Uni owners can also upgrade to this lid if they want to take advantage of the second 1.5" port. This extra port is great for adding hops or other flavor additions without needing to remove and reinstall the Blowoff U Barb or other accessories attached to the primary 1.5" port. Also features a pull ring PRV built into the lid.
The 25/38 gal size will fit X1 28/42 gal fermenters.
NOTE: The lid does not include clamps, gaskets, or other fittings seen in the example photo. The PRV will come pre-installed and all other ports will come bare.
The Flat Twister Lid comes with 3 pre-drilled holes perfectly sized for the Duotight bulkheads that come with the Temp Twister Cooling Coil and FermZilla Thermowell. Lid o-ring included. This lid is only recommended for FermZilla users that will be using the Temp Twister and the Thermowell together. Kegland Part number: KL15059
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid November.
For commercial brewery application with a range of 0-2.2 Bar. For homebrew fermenters, see the BrewBuilt® Spunding Valve
Automatically release pressure inside your fermenter during pressure fermentations
Compatible with any stainless steel pressurizable fermenter with 1.5" tri-clamp ports
In-line pressure gauge for easy reference of tank pressure reads from 0-35 PSI
Made from 304 stainless steel and comes fully assembled
This tri-clamp spunding valve provides professional-level accuracy for fermenting under pressure. Attach to any pressurizable stainless steel conical with 1.5" TC ports and set your desired blow-off pressure. A pressure gauge sits in-line from the conical to the spunding valve so you can reference the current pressure inside your vessel at any time. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process.
Not designed for homebrewing conicals where the maximum allowed pressure does not exceed 1 Bar.
The pressure gauge reads from 0-35 psi or 0-0.25 MPa. The spunding valve is scaled in both psi and BAR, up to 32 psi (2.2 BAR).
Comes fully assembled
1.5" tri-clamp connection
In-line pressure gauge
Made from 304 stainless steel
For Your Safety: Never exceed the maximum rated working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The Copper Reflux Still Condenser is designed to create high percentage pure neutral spirit. It features a flow management device, which makes it extremely easy to use. No need to worry about fine tuning the water flow speed. As long as your providing enough coolant or cold water running through the condenser, the flow rate doesn't matter. The purity of the spirit can be controlled by two included flow control inserts. These brass inserts come with a 1.0mm hole and 0.6mm hole. As the hole gets smaller, the rate at which the spirit exits the condenser will decrease, thus increasing your reflux ratio and the purity of your spirit.
If you want to make whiskeys and gins we recommend checking out the Copper Pot Still!
This is only the still top and does not come with a boiler. Combine with a distillation lid to use a BrewZilla or DigiBoil as the base for this Alcoengine brand still top.
Comes with 13 mm (0.51") barb connections for the water inlet and outlet.
Kegland Part number: KL16162
Maximize the purity of your distillate with high density spiral prismatic packing Prismatic spiral shape designed to maximize surface area One 500g bag is suitable for filling one 10" long 2" tri-clamp extension tube Take you distillation to the next level with super high density spiral prismatic packing. The packing maximizes the purity of the collected distillate from your reflux still, ensuring the best possible product is collected. The prismatic spiral shape is designed to maximize its surface area helping to separate out fractions in your reflux, resulting in a highly pure and neutral end product. It is not recommended for use with pot stills when producing flavored spirits. Standard spiral prismatic packing is recommended for home-sized columns like the AlcoEngine series. Large size packing is recommended for 4" diameter or larger columns. Note: We recommend soaking and washing the SPP before its first use with a 50:50 mix of vinegar or citric acid and warm to hot water to remove all manufacturing oils. Sizing: The SPP is approximately 3.35mm x 3.45mm. Suitable to fill a 10” x 2” T.C. Extension Tube. One 500g bag of SPP is enough to fill approximately 500 mL (16.9 oz) of volume. The HETP (Height Equivalent to a Theoretical Plate) for this packing is approximately 30mm. That is roughly 33 theoretical plates per meter. KegLand Part Number: KL25706
Perfect for serving your craft creations on the go or making a compact home draft system that fits inside your refrigerator
Welded from the inside out using a specialized technique for superior, more sanitary welds compared to similar mini kegs
Interlocking chimes for easy and secure stacking of multiple mini kegs
KegLand's Small Stainless Steel Mini Beer Kegs are ideal for homebrewing small batches and serving your craft creations directly from your home fridge. These compact kegs are designed for convenience and versatility.
Flexible Dispensing and Carbonation
You can naturally carbonate your beer using priming sugars or, for a more controlled approach, force carbonate and serve with the Ball Lock Tapping Head. The Tapping Head features a flexible silicone dip tube, allowing you to dispense beer whether the keg is standing upright or lying on its side. The dip tube will sink and draw liquid from the bottom, allowing you to orient the keg whichever way is more convenient in your refrigerator.
Superior Quality and Durability
KegLand's mini kegs are built to last, undergoing acid bath electrolysis to passivate the stainless steel, making them exceptionally resistant to rust. These are the only mini kegs on the market that are welded from the inside out using a specialized technique. This results in a superior, more sanitary welding finish compared to other mini kegs. When you choose a KegLand mini keg, you're investing in the highest quality available, surpassing the standards of other mini kegs of similar design.
Low2 Lid O-Ring
The sealing cap features an O-ring made of KegLand's special Low2 material which offers vastly improved oxygen barrier properties compared to silicone or EPDM, resulting in your beverage staying fresher for longer.
Expand Your Setup with Accessories
Enhance your mini keg experience with a range of available accessories, including neoprene jackets for insulation and compact tapping systems for easy dispensing.
Stackable with the 2L Mini Keg.
Specs:
4L / 1 Gal / 135 fl oz
11" High x 5.3" Diameter (280mm x 135mm)
Max Working Pressure: 45 PSI / 3 Bar
Made from 304 Stainless Steel
KegLand Part Number: KL06354
Density sensor with integrated temperature sensor for FCS gives accurate and real-time density and temperature data for your fermentation tank
Measures density by inducing a vibration frequency in the fork and listening for the resonant frequency
Primarily designed for fermentation tanks like the F40-F300 and similar tanks
Tuning fork-based measurements gives accurate and real-time density and temperature data for your fermentation tank. The Brewtools density sensor measures density by inducing a vibration frequency in the fork and listening for the resonant frequency.
Take your fermentation to the next level with data-driven control and logging. Future updates of FCS will enable you to control temperature and pressure steps based on density in the tank, without the need for manual intervention.
This model is primarily designed for fermentation tanks like our F40-F300 and similar tanks. Accuracy may vary for smaller tanks (like MiniUni+).
More information: https://docs.brewtools.com/density-sensor
Specifications:
Density accuracy: +-0.002 SG
Temperature accuracy: +- 0.3ºC
Flange: TC 1.5". Ø25mm minimum
Length: 300mm from flange
Connector: LP12 5-pin (CAN bus + 24V)
Note: Accuracy and function can vary based on trub, yeast health, yeast flocculation, rapid temperature changes, dry-hopping and other additions and distance to tank wall/heating elements etc. Pressure fermentation can increase accuracy. Accuracy and features will improve over time with software updates.
Brewtools Product Number: 7713846
Filter holder in stailess steel for use in all temperatures. For 180mmx30mm filters.
Holds the Brewtools 30mm filter in place in M16 ball locks or other M16 holders.
Perfectly sized for use with water lines—step down the pressure of your mains for use with water filtration systems Built-in pressure gauge for easy reference when adjusting pressure settings Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application Compatible with both liquid and gas 6.35 mm Duotight inlet/outlet for use with 6.35 mm OD PE Water Line or EVABarrier tubing The Duotight In-Line Regulator works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 6.35 mm Duotight fittings at both inlet and outlet make this unit perfect for use with 6.35 mm OD tubing (D1723C or D1727C). Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. The size of the Duotight connection and the extended 0-150 PSI pressure range makes this model perfect for stepping down the pressure of your mains water line for use with water filtration or RO systems. Specifications:
Made from food grade acetal Stainless screws Easily disassembles for cleaning 6.35mm (1/4") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-150 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Kegland Part number: KL26918
Perfect for serving your craft creations on the go or making a compact home draft system that fits inside your refrigerator
Welded from the inside out using a specialized technique for superior, more sanitary welds compared to similar mini kegs
Interlocking chimes for easy and secure stacking of multiple mini kegs
KegLand's Small Stainless Steel Mini Beer Kegs are ideal for homebrewing small batches and serving your craft creations directly from your home fridge. These compact kegs are designed for convenience and versatility.
Flexible Dispensing and Carbonation
You can naturally carbonate your beer using priming sugars or, for a more controlled approach, force carbonate and serve with the Ball Lock Tapping Head. The Tapping Head features a flexible silicone dip tube, allowing you to dispense beer whether the keg is standing upright or lying on its side. The dip tube will sink and draw liquid from the bottom, allowing you to orient the keg whichever way is more convenient in your refrigerator.
Superior Quality and Durability
KegLand's mini kegs are built to last, undergoing acid bath electrolysis to passivate the stainless steel, making them exceptionally resistant to rust. These are the only mini kegs on the market that are welded from the inside out using a specialized technique. This results in a superior, more sanitary welding finish compared to other mini kegs. When you choose a KegLand mini keg, you're investing in the highest quality available, surpassing the standards of other mini kegs of similar design.
Low2 Lid O-Ring
The sealing cap features an O-ring made of KegLand's special Low2 material which offers vastly improved oxygen barrier properties compared to silicone or EPDM, resulting in your beverage staying fresher for longer.
Expand Your Setup with Accessories
Enhance your mini keg experience with a range of available accessories, including neoprene jackets for insulation and compact tapping systems for easy dispensing.
Stackable with the 4L Mini Keg.
Specs:
2L / 0.52 Gal / 67 fl oz
7.6" High x 5.3" Diameter (195mm x 135mm)
Max Working Pressure: 45 PSI / 3 Bar
Made from 304 Stainless Steel
KegLand Part Number: KL06347
Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment.
Simcoe® Strike is a West Coast Pilsner-style beer with a crisp lager-like base, bold Simcoe® hop character, clean bitterness, and a white, frothy head that laces beautifully on the glass
Flavored with Simcoe® Cryo Hops®
Estimated ABV: 5.8%
Estimated IBUs: 30
Makes 5 gallons of finished beer
Simcoe® Strike West Coast Pilsner Flash Brewing® Kit
Simcoe® Strike is a West Coast Pilsner-style beer with a crisp lager-like base, bold Simcoe® hop character, clean bitterness, and a white, frothy head that laces beautifully on the glass. Its malt blend delivers a smooth, clean foundation with a subtle sweetness that supports the bright hop profile and refreshing finish.
Simcoe® Cryo Hops® contribute notes of citrus peel, grapefruit, light resin, and subtle pine, giving this beer a distinctly West Coast hop character while still keeping the crisp, drinkable nature of a Pilsner. Flash Yeast™ ensures a clean fermentation that lets the malt and hops shine. With Flash Yeast doing the work, this Pilsner can be fermented at a wide temperature range of 65°F to 85°F.
For the best clarity and smoothness, lagering is recommended at 40°F. Fermenting at around 70°F, this recipe finishes fermentation more quickly than a standard lager. This bright, hoppy, and refreshing beer can be ready to enjoy in just a few days. For the best clarity and smoothness, storing cold (lagering) for a couple of weeks is recommended. The best clarity and smoothness, storing cold (lagering) for a couple of weeks, is recommended.
Flash Brewing® Kits
Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. Flash Brewing® offers a streamlined process that not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home.
Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you.
If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions.
Equipment Required for Flash Brewing®
Flash Brews can be fermented in any wide mouth 6 or 7-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 7-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, check out the Flash Brewing® Starter Kit for 5-gallon recipes.
Includes:
Simcoe® Strike Flash Malt™: 6 lbs
Simcoe® Cryo Hops®: 2 oz
HopBite™: 30 IBU Shot
Flash Yeast™
Flash Brewing® Instructions
Simcoe® and Cryo Hops® are registered trademarks owned by Yakima Chief Hops, LLC.
Put your ball lock or pin lock homebrew keg back into perfect working order with the KOMOS corny keg rebuild kit. Includes brand new o-rings for the keg lid, dip tubes, and keg posts / body connects.
Comes in a convenient zip lock bag.
Thousands of food and beverage professionals and hobbyists have moved from less accurate and less precise optical refractometers to digital Brix measurement. Milwaukee’s MA871 is the ideal tool for winemakers, brewers, fruit and vegetable growers, maple syrup producers, and food producers.
The MA871 is fast and easy-to-use with a response time under 2 seconds. Maintenance is a breeze with an easy-to-clean sealed flint glass prism and stainless steel well. The measurement technique and temperature compensation employ methodology recommended in the ICUMSA Methods Book (internationally recognized body for sugar analysis).
Summary
The Milwaukee digital BRIX refractometer is temperature compensated with a 0 to 85 percent BRIX range and ±0.2 percent accuracy. It is easy to use with simple two button operation and fast with a response time under 2 seconds. Maintenance is a breeze also with an easy-to-clean sealed flint glass prism and stainless steel well.
Design Features
Fast, accurate results with digital dual level LCD readout
Easy measurement with just 2-3 drops of sample needed
Results in less than 2 seconds
Simple one-point calibration using distilled or deionized water
Easy-to-clean stainless steel sample well
Meter rated to IP65 as “dust tight” and protected against water jets
Battery percent level indicator with automatic shut-off (batteries included)
Automatic Temp. Compensation (ATC)
Hard plastic case sold separate: MA800.
Range:0 to 85% Brix
Resolution:0.1% | 0.1°C (0.1°F)
Accuracy:±0.2% Brix | ±0.3°C | ±0.5°F
Stainless steel coupler or "reducing socket". 1" BSPP x 3/4" BSPP. Made from stainless steel.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL10566
Laser cut filters made from steel blasted and electropolished stainless steel. Simple cleaning and maximum durability.
Gap width: 1.3mm
Pre-cut hole for weldless fitting to use with future accessories.
This is a replacement 175°C (347°F) thermal cut out switch for the 110V BrewZilla 35L & DigiBoil 35L Units.
This thermal cut out switch is mounted directly to the heating element so as soon as the heating element gets too hot the bi-metal switch will activate and cut the power to the element. It can also trigger an E3 or E4 error when this happens on the display.
Our Premium BIAB (Brew In A Bag) kettle and bag kit is the most affordable way to get into all-grain brewing. This hardware kit includes a stainless steel kettle, ball valve, hose barb connection, 1/2" plug and plumbers tape to seal the connections. While it does not include directions (you can easily Google BIAB), the basic concept is that you place the bag in the kettle, add the grain from your recipe along with a measured amount of hot water and let it steep for 60 minutes. You then remove the bag and boil with hops in the same vessel. Very easy.
Available with either an 8.5 or 14 gallon kettle.
Brew in a bag kit includes:
Stainless steel brew kettle with 1/2" FPT fittings
1/2" stainless steel ball valve, with stainless hex nipple and 1/2" stainless steel barb
Stainless steel plug for thermometer port
29" X 29" nylon mesh bag with drawstring
Roll of plumbers tape
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops.
If you're an existing FermZilla Conical or All Rounder user and you already own the Pressure Kit with 2x Ball Lock Caps and floating dip tube, check out the Hop Bong Upgrade Kit.
The 3 Pieces of the Hop Bong Pressure Pack:
Pressure Kit
The Pressure Kit includes two Ball Lock Caps with the Floating Dip Tube and Filter Attachment. These pieces allow you to pressure transfer finished beer out of the fermenter into kegs or a bottling bucket, or you can carbonate and serve beer directly from the FermZilla.
Tri-Clamp Pressure Lid
Replacing the standard lid with the FermZilla Tri-Clamp Pressure Lid provides you with a 2" T.C. port at the top of your fermenter. This will give you an opening to add dry hops or other additions without needing to remove the entire lid. Take off the butterfly valve to add your yeast pitch, and when you're ready to add flavoring additions when fermentation is complete, drop them in oxygen-free via the Hop Bong. PCO1881 threaded ports are there for your Ball Lock Caps, as well as undrilled ports for an optional Thermowell and/or Temp Twister cooling coil.
Hop Bong
Load up the Hop Bong and add CO2 to purge your hop charge of oxygen. This kit comes with a third Ball Lock Cap to introduce CO2 directly to the Hop Bong, as well as a pull ring PRV to release pressure and purge oxygen. Once you've flushed your hop charge with CO2, open the butterfly valve to inject your beer with up to 6 oz of hop pellets.
Hop Pellet Capacity: 150–180g (5.2–6.3 oz)
Kit Includes:
FermZilla 2" T.C. Pressure Lid Starter Kit
2" Hop Bong
2" FermZilla Tri-Conical Butterfly Valve
Floating Dip Tube
Weighted Mesh Filter Attachment (KEG6571)
Red PRV & PCO1881 Cap Combo
Yellow Ball Lock Cap
(2) Red Ball Lock Caps
(2) 2" Tri-Clamps
(2) 2" Silicone T.C. Gaskets
KegLand Part Number: KB10897
Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty FermZilla, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the tank.
Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter.
High quality transparent silicone tube. Recommended for dumping yeast. Use with 30mm barb x 2" tri-clamp (BT1074).
Food grade silicone
Inside diameter: 25mm (0.98")
Outside diameter: 34mm (1.3")
Sold in 1.5m lengths (4.9')
Make that Dank IPA LOUD with a hit of cannabis terpene extracts
Abstrax®, the most reputable terpene brand in the cannabis industry, is now granting brewers access to the amazing aromas found in your favorite strain
The Chronic - Replicates the terpene profile found in Blackberry Kush cannabis
Blackberry and Afghani Kush come together to provide bursting Berry and Dank aromas
Feeling Good! Terpenes function as mood enhancers; this Blackberry Kush will have you feeling Relaxed and Peaceful
420 Friendly - Contains no THC and no CBD. Legal worldwide
Blackberry Kush
Cannabis nostalgia harmonizes with all the glory of hops in gassy Blackberry Kush. Dark berries combine with notes of spice and earth to create an exquisitely dank detour on the ultimate flavor reunion tour.
BrewGas Series
A collection of the world’s gassiest and skunkiest cannabis profiles. If you’re a cutting-edge brewer looking to impart the authentic flavor and aroma of cannabis into your next beer, then look no further. BrewGas is water-soluble, uses only natural ingredients, and it’s TTB-approved. It’s flowable, doesn’t stick to the tank, and contains no THC so it’s legal everywhere.
True-to-Type Botanically Derived Cannabis Profiles
Cannabis and hops are members of the same genetic family but they’ve been historically kept apart by prohibition. With cannabis making its way into the mainstream, Abstrax is able to bring novel ingredients like terpenes to the brewer for the first time. We're here to reunite the family.
Dosage
Add 2.5 mL per 5-gallon batch for a moderate dank impact. Adjust to taste. Add at any point on the cold side in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass.
Features:
Scalable
TTB Aproved
Legal Worldwide
No THC / No CBD
Water Soluble
Powered by Terpenes
Repeatable
Recommended storage: 40-90°F. Do not freeze.
Disclaimer: This product is not intended to be inhaled, vaped, smoked, combusted, or anything similar. This is a food and beverage product. Seriously. Don’t vape these. You’ll have a bad time.
The Replacement Lid Seal for the 4 Gallon Bucket Fermenter ensures an airtight seal to prevent contamination and oxidation, keeping your brew safe during fermentation.
This BrewMaster Series kit was scaled down to a homebrew batch size in collaboration with the brewmasters at Moonraker Brewing Company This juice bomb of a Hazy IPA overflows with flavors of peach, apricot and orange sherbet Includes Citra Cryo®, Amarillo®, and Apollo™ hops Estimated ABV: 7% Estimated IBUs: 40 Makes 5 gallons of finished beer Moonraker brewing is an absolute favorite amongst our staff members here in California. So, when they agreed to collaborate on a beer kit, we were through the moon. Moonraker is located in Auburn, CA and prides themselves on sustainability and quality. Their pedigree and collection of awards are undoubtedly incredible. Excelling at hazy IPAs, as well as traditional and experimental styles, everything produced is orally orgasmic. The beer is so delicious, if seen on tap in the wild, one MUST order the obligatory pint. When galaxies collide, stars and planets alike are ripped apart with all types of matter being flung hither and yon. Luminescent particles are scattered to the ether, condemned to wander the void or bound to coalesce into new celestial bodies. Some believe that amongst the chaos of colliding fragments, a mythical form of cosmic dust condenses into Space Nectar—matter so delicious that our Terra-bound taste buds would surely find it incomprehensible. Physics be damned, Moonraker Brewing Company's extraordinary Hazy IPA is the best estimation of what it may be like to take in this heavenly ambrosia. Space Nectar overflows with flavors of peach, apricot and orange sherbet. Over half of the hop bill is comprised of Cryo Hops® which lend a clean, pungent aroma to this absolute juice bomb. A healthy helping of pale wheat malt and flaked wheat provide the perfect amount of fuzz to complement the bright notes of stone fruit. If you can't wait to taste this juice bomb because it smells so good in the fermenter, don't worry! You can order directly from the brewery if you live in California! Try some of their constantly rotating selections alongside your own creation to see how they compare! Moonraker's head brewer, Brad Johnson, recommends cooling the wort to 170°F before adding the whirlpool addition to really make those hops pop. Ferment with Imperial Juice A38 or similar strain to add the ideal finishing touch. Makes 5 gallons Estimated Original Gravity: 1.069-74 SRM (Color Range): 4-5 IBUs: 40 Estimated Alcohol Percentage: 7.0% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled. Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers. Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.
Not all bi-metal thermometers are created equally, so if you’re looking for one that you don’t have to constantly tap to get an accurate reading, this is the thermometer to choose.
Other bi-metal thermometers have a helical coil in the stem that is tack welded to the stem itself causing hang ups to occur, and you have to tap the thermometer to get an accurate reading. Our new line of thermometers feature a super sensitive bimetallic helical coil suspended from a copper coated bushing fixed in the stem. This superior design provides a faster response to temperature changes and assures more accurate readings.
It's accurate to 1% of the total range, and it features a polished 2" stainless steel housing, hermetically sealed waterproof case and glass face for maximum durability. The unique anti-parallax dial also makes for easy reading.
This dial thermometer should be calibrated at 150 °F. Its temperature range is 0-220 °F (-10 to 100 degrees °C).
This bushing can be used to install a weldless brewmometer into a 1/2" NPT fitting. It can also be used with Blichmann Tower of Power temperature sensors.
To install the thermometer into a female NPT fitting, place the o-ring and washer on the thermometer as indicated by the directions, then thread the adapter bushing onto the thermometer. Apply plumber's tape (H900) to the external NPT threads of the bushing. Tape is not required on the thermometer's threads due to it using the o-ring. Simply thread the thermometer into the bushing with the o-ring and washer in place.
Caution: Once installed, the bushing can not be removed. Avoid overtightening, as it may damage the components.
Replacement triangular plastic ball retainer for check valve assembly on Sanke couplers. This is the little plastic piece that holds the check valve ball in place.
An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 1/4" male BSP threads.
BSP vs. BSPP
BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT.
KegLand Part Number: KL06439
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The 1/5 HP Centrifugal Pump from Blichmann Pro Brewing is your brewery’s all-in-one brewing filtration and beer transfer pump. Our complete brewing pump kit has everything you need in one package — no guesswork, no extra parts to chase down. At the heart of the system is the trusted 1/5 HP March pump, delivering a strong 18 GPM flow rate and built for high-performance brewing operations. It includes a sturdy stand, ergonomic carry handle, diaphragm valve for precise flow control, and all pictured fittings — ready to go right out of the box. It’s purpose-built for filtration, beer transfer, and clean-in-place (CIP) in commercial brewing environments.
Designed to save time and streamline setup, this kit offers professional-grade durability, leak-free performance, and the reliability brewers need on busy brew days.
Features:
Delivers High-Performance Flow: Delivers high-performance flow for demanding commercial brewing tasks like beer transfer, filtration, and CIP.
Complete, Ready-to-Use Kit: Unlike other options on the market, our 1/5 HP Centrifugal Pump includes a stand, ergonomic carry handle, diaphragm valve, and all the necessary fittings—no extra parts are needed. Ready to use right out of the box.
Pro-Grade Durability & Leak-Free Design: Built for commercial brewing environments with a reliable, time-saving setup and long-lasting performance.
1/5 HP Centrifugal Pump Kit Parts: 1/5 HP mag-drive Centrifugal Pump Stainless steel stand with slip-resistant handle and rubber feet 115V UL power cord 1.5″ tri-clamp adapters for inlet and outlet 1.5″ tri-clamp clamp and gasket 1.5″ tri-clamp sanitary diaphragm valve for precise flow control
Fits PET Carboys. A breathable Silicone stopper that acts as both a stopper and an airlock. Unique design allows CO2 pressure to escape but keeps Oxygen and airborne contamination out. Quickly became our stopper of choice for wine. Used by numerous commercial wineries. Also has great application for beer ferments: Will create a vacuum if fermenting wort cools (as opposed to pulling water in from your traditional airlock.) Air tight seal is great for extended fermented lager when CO2 production is still present but very slight.
Super-sized corny keg, great for bigger batches and fermentation
Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg!
Brand new, all-stainless construction ball lock keg
Stackable with ball lock quick disconnects in place
Etched In and Out labels near the keg posts for easy identification
Rolled handles for a comfortable grip
Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams
Look out below! The Torpedo Keg Depth Charge series just dropped and they're set to send blast waves through the homebrew world. Large-scale homebrewers will appreciate the ability to fit their entire batch into a single 10-gallon ball lock keg, and you can expect the same great features that have made Torpedo Kegs such a hit. Laser welded construction for superior quality, rolled stainless steel handles that will last a lifetime, and stackable design that won't interfere with your fittings.
Quality First
The first thing we at MoreBeer! check out is interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. These kegs are machine welded and exceed our standards for quality. The weld quality is possible because these kegs made by an ISO certified commercial keg manufacturer.
Cool Features
Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving, which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. In and Out is etched near the keg posts for easy identification, which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake.
Low2 Keg Lid O-ring
Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer.
Specifications:
Total Capacity: 10.1 gal.
Max Pressure: 130 psi
PRV Rating: 85 psi
Height: 18.5"
Diameter: 16.05"
Made from 304 Stainless Steel
The standard plastic handheld faucet modified for use with Duotight fittings and EVABarrier draft tubing. The 6.35mm end piece can be paired with the 8mm x 6.35mm Duotight reducer to use with 8mm OD EVABarrier tubing. Commonly called a "cobra tap" or "picnic faucet". Duotight fitting sold separately. KegLand Part Number: KL21821
