Search results for "ss brewtech gasket"

Comes with a welded 5/16" nipple, back nut, and plastic collar. It requires a 1" hole for installation. When set in place, the shank will only have about 1-1/4" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. The barb size is rounded to 5/16" OD (0.31"). The true size is 7.5mm (0.29"). Dimensions: 3-1/8" - Total Length (Tip to Tip) 2-1/2" - Shank Length (Without Nipple) 1-1/8" - Thread Length 1-1/4" - Pass Through Length

Read more less

Elevate your brewing game with the 220V Gen 4 BrewZilla. This cutting-edge system combines more power with innovative features like wireless connectivity via WiFi & Bluetooth, allowing you to heat faster while you control and monitor your brew day, ensuring precision, convenience, and exceptional beer batch after batch! WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench Mirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter Make larger batches or higher gravity beers! BrewZilla offers the largest malt pipe capacity for units in its size range, and the Gen 4 unit has a 30% larger malt pipe compared to the previous generation Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve Pair with the RAPT-enabled Bluetooth Thermometer, allowing your BrewZilla to calculate a core mash temperature reading and more accurately control temperatures and mash steps More RAPT-enabled accessories are coming, and future firmware updates can be downloaded to the RAPT Controller itself over the internet WiFi/Bluetooth Enabled RAPT Controller The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen. But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability. And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer! But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings. Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road. High Capacity Malt Pipe With an approximately 23.5 lb capacity, the BrewZilla can mash nearly 50% more grain than similar sized models of the Anvil Foundry and Grainfather G30. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency. Concave Base with Center Draining Leave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind. Ultra Low Watt Density Elements The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy. Easy Access Built-In Pump The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet. If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer. MoreBeer!'s Final Word We’ve been selling all-in-one brewing systems ever since they first hit the market, and we have to say that the Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included. Perfect for Distillation If you want to expand your lineup of homemade libations to offer Spirits in addition to Ales & Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find. Features: Gen 4.1 Stainless steel construction 9 gallon total capacity with a finished beer output of 5-6 gallons WiFi/Bluetooth Enabled RAPT digital temperature controller Automatic step mashing with 6 programmable stages 220-240V power NEMA 6-30P plug Requires NEMA 6-30R receptacle Requires 11 amps from 30 amp circuit Dual heating elements (1900 watts and 500 watts) Stainless steel 1/2" ball valve for gravity draining or transferring via pump Immersion wort chiller included Stainless steel malt pipe/basket Stamped in volume markers Glass lid Adjustable lid clamps (do not use with glass lid in place - see below) Magnetic drive pump for recirculation, transfers, and cleaning Recirculation arm PPSU sight glass Bottom handle for easy lifting and pouring Rubber feet Temperature reads in °F or °C Approximately 32.75" H (with recirculation arm) x 12.5" D Recommended max. grain bill: 23.5 lbs AlcoEngine Still ready with the purchase of a Distillation Lid Pump Specs: Max Capacity: 2.9–3.1 gal/min Max Head: 4.9–6.8 ft. Poles: 2 Voltage: 220–240V-AC Frequency: 50–60Hz Power: 6 watts Current: 60 mA Speed: 2600–3000rpm Duty Cycle: Continuous Capacitor: 2µF Input/Output: 13mm barb Water Resistance: IPX2 You Will Need: 2' of H985 1/2" ID Silicone tubing for sparging and draining. To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950hose clamps and (1) brass hose by thread adaptor (H508). These items come in the Wort Chiller Connection Kit, add the kit to your cart and use code ZILLAKIT at checkout. KegLand Part Number: KL27434 Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Please Note: When removing the malt pipe to drain after mashing, it is important to do so slowly rather than in one swift pull. If the malt pipe is removed all at once when it is full of wort, it is possible for the draining wort to spray out and over the rim of the brewery through the perforated bottom. Remove the malt pipe slowly so that some of the wort can drain out before it is fully removed and set on its bottom feet. This can be done by hand on the 35L unit, but for the 65L and 100L units we highly recommend using the Pulley System for removing the malt pipe. Warning: Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. With too much tension, it is possible for the lid clamps to break the glass lid when engaged. Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use.   35L (110V) 35L (220V) 65L (220V) 100L (220V) 10 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 25 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 50 ft. 12 Gauge 12 Gauge 10 Gauge 8 Gauge   RAPT Gen 4 BrewZilla | User Manual

Read more less

Replacement lever collar for Intertap or NukaTap faucets. This beer faucet part threads onto the lever and sits above the friction bonnet. Used to help adjust your tap handle to face forward if it is oriented at an angle when fully threaded onto the faucet lever.

Read more less

This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL0240

Read more less

HellFire™ Burner Gasket – carbon material. 

Read more less

Ever wanted to punch out a few more gallons of wort with your 65L BrewZilla? Maybe you wanted more strike water for a super sticky batch. Maybe you get boil overs a lot and would like a bit of extra protection. Now there's a solution! The all new 65L BrewZilla Boiler Extension adds 6.3 gallons of headroom. Turn that 17G BrewZilla or DigiMash system into a 23G behemoth! The extension kit is also great for distilling! Extend the height of your pot still by attaching one or more boiler extensions. For distillation, we recommend upgrading to the Adjustable Lid Clamps which allow you to dial in the tension for a better seal. If you're struggling to get an airtight seal when using the Distillation Lid or Steam Condenser Set, these clamps can help provide more tension. Compatible with Gen 3 / Gen 4 BrewZillas. You Might Also Need: 65L Extended Malt Pipe 65L Wire Support Ring Recirculation Arm Extension KegLand Part Number: KL22248

Read more less

LP12 5-pin cable for CAN devices. 3m or 9.8 feet in length. Brewtools Product Number: 7713278

Read more less

The BrewLab Plus® water test kit, model 7188-02, for home brewers quantifies 8 important water test factors. Includes everything in BrewLab Basic kit plus a high quality digital pH meter for monitoring batches from start to finish. Experts agree water conditions affect your final product, so take the mystery out of making great beer. Trust LaMotte, the water analysis experts since 1919, to help you control your most important ingredient—water! Visit HomeBrewFinds.com for a hands-on review of the LaMotte BrewLab water test kit. For more information on water and its role in the brewing process, check out Water, A Comprehensive Guide for Brewers written by John Palmer and MoreBeer!'s own Colin Kaminski. For help with water adjustments, download Palmer's Brewing Water Adjustment App, currently available for iOS devices and coming soon to Android. See the Documents Tab above for additional information.

Read more less

The highest quality plastic ball lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Black plastic clearly identifies the disconnect as the liquid out QD Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany. Red and black quick disconnects are used for the liquid out tank plug. 1/4" male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

Read more less

Turnkey Commercial Cold Brew Production: Streamlines small-scale batch brewing for cafes, roasteries, and craft breweries, eliminating the messy, backbreaking labor of traditional methods. No-Lift Side-Manway Cleanout: Features a horizontal door and chute to easily rake out spent grounds into a waste bin, removing workplace lifting hazards. Dual-Stage Nested Filtration: Utilizes a progressive fine and extra-fine mesh bag system supported by a slotted false bottom to guarantee sediment-free, brilliant liquid clarity. Heavy-Duty Dished Bottom Drain: Built from premium 304 stainless steel with a center-mounted Tri-Clamp port to harvest every last drop of extract without tilting the vessel. Flexible Packaging Integration: Equipped with a sanitary 1.5" butterfly valve for seamless, low-oxygen closed transfers directly into kegs, bottles, or canning lines. Commercial cold brew production has traditionally been a messy, backbreaking process. Hoisting 40 pounds of soaking-wet coffee grounds straight up out of a flat-bottom plastic bucket is a workplace hazard waiting to happen. To make matters worse, struggling with cloudy sediment leads to clogged draft lines, chalky mouthfeel, and drastically shortened product shelf life. The BrewBuilt® CB1 completely redefines small-scale commercial cold brew production. Built on our heavy-duty, 304 stainless steel bottom-drain chassis, this turnkey system eliminates overhead lifting, guarantees brilliant liquid clarity, and adapts to any packaging workflow. Whether you run a bustling cafe, a roasting facility, or a craft brewery, the CB1 delivers a high-yield solution designed to protect both your back and your brew. Key Design Innovations Ergonomic Side-Manway Cleanout The CB1 features an integrated, rectangular side-manway door. Instead of lifting heavy, dripping bags up and out of the vessel, operators simply open the front door and easily slide or rake spent coffee grounds out horizontally into a waste bin. Progressive Dual-Stage Filtration Achieve unmatched clarity without the need for expensive secondary paper filters. The CB1 utilizes a stacked filtration system featuring a Fine mesh bag nested inside an X-Fine mesh bag. Heavy-Duty Drawstrings: Both commercial-grade bags feature rugged drawstrings that cinch tightly around the rim of the kettle, keeping them securely locked in place during the steep. The Slotted False Bottom Advantage: As seen in the cross-section view, the nested bags rest completely flat on a heavy-gauge, slotted stainless steel false bottom. This structural support keeps the fabric elevated above the true dished bottom, preventing the weight of the coffee grounds from plugging the drain hole and ensuring an unrestricted, rapid extract flow. Total Packaging Flexibility The sanitary 1.5" Tri-Clamp bottom butterfly valve acts as a modular launchpad for your finished product. Once the steep is complete, you can gravity-drain the kettle with precision control: Kegging: Perform flawless, low-oxygen closed transfers directly into purged beverage kegs. Bottling & Canning: Hook up directly to counter-pressure bottle fillers, BeerGuns, or small-scale canning lines. Product Features & Specifications Premium 304 Stainless Steel Construction: Brewery-grade, sanitary construction that is impervious to flavor stains, easy to sanitize, and built for a lifetime of daily service. Dished Bottom Drain: Features a center-mounted 1.5" Tri-Clamp total-drain port so you get every single drop of premium coffee extract out of the batch with zero vessel tilting. Horizontal Grain Door & Chute: Drastically reduces physical strain on baristas and roasters during cleanout. Dual-Port Capability: Features an additional side-mounted Tri-Clamp port for optional expansion accessories like temperature probes or sample valves. Available Sizes: Optimized for small commercial batches in 10-Gallon and 20-Gallon capacities. What’s Included: 1x BrewBuilt Premium Bottom-Drain Stainless Steel Kettle 1x Integrated Rectangular Side-Manway Door with Removable Chute Assembly 1x Heavy-Gauge Slotted Stainless Steel False Bottom 1x 1.5" Tri-Clamp Stainless Steel Sanitary Butterfly Valve 2x Fine Heavy-Duty BrewBuilt Cold Coffee Filtration Bags 2x X-Fine Heavy-Duty BrewBuilt Cold Coffee Filtration Bags All Necessary Hardware: High-quality Tri-Clamp gaskets, clamps, and lid assembly.  

Read more less

Prevents Boil-Overs: One drop per gallon eliminates messy boil-overs, making your brewing process cleaner and safer, saving time on cleanup. Increases Fermenter Capacity: Reduces Krausen foam during fermentation, allowing more beer volume and minimizing the risk of messy blowouts. Improves Head Retention: Enhances head formation in finished beer by preserving foam-forming proteins that would otherwise be lost during fermentation. Food-Grade and Easy to Use: Made from food-grade silicone, Foam Axe safely breaks up foam with just a few drops, settling out before bottling or kegging. Stop boil overs in the kettle and limit foaming in your fermenter with CellarScience Foam Axe. This uniquely formulated anti-foaming agent reduces surface tension so bubbles are Axed before they can form. Foam Axe actually increases head formation in the finished beer by retaining foam forming proteins that would have normally blown off during fermentation. Use it in your boil kettle to prevent boil-overs for a cleaner, safer process. Then add Foam Axe to your fermenter to reduce Krausen, save beer, and increase the volume capacity of your fermenter. In the Kettle: Nobody likes a boil over as they are messy and take considerable time to clean up. Save time, beer, your burner or stove, (and possibly your relationship) by adding 1 drop per gallon of Foam Axe into your kettle and eliminate boil overs from your brew day!     In the Fermenter: Foam Axe works like magic in the fermenter. Just 2 drops per gallon at the start of fermentation will keep your airlock and blowoff clean. We recommend adding before pitching yeast and rousing well while you aerate your wort. Many commercial breweries use Foam Axe to increase fermenter capacity and homebrewers can do the same. Additional Notes: Foam Axe is made from food-grade silicone and works by breaking up foam particles and dispersing surface tension. Foam Axe settles out of beer prior to bottling or kegging. Store cool and in an environment below 90°F. Do not freeze. The recommended shelf life is 6 months from the date the package is opened.    

Read more less

Elevate your brewing game with the 220V Gen 4 BrewZilla. This cutting-edge system combines more power with innovative features like wireless connectivity via WiFi & Bluetooth, allowing you to heat faster while you control and monitor your brew day, ensuring precision, convenience, and exceptional beer batch after batch! WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench Mirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter Make larger batches or higher gravity beers! BrewZilla offers the largest malt pipe capacity for units in its size range, and the Gen 4 unit has a 30% larger malt pipe compared to the previous generation Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve Pair with the RAPT-enabled Bluetooth Thermometer, allowing your BrewZilla to calculate a core mash temperature reading and more accurately control temperatures and mash steps More RAPT-enabled accessories are coming, and future firmware updates can be downloaded to the RAPT Controller itself over the internet WiFi/Bluetooth Enabled RAPT Controller The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen. But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability. And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer! But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings. Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road. High Capacity Malt Pipe With an approximately 23.5 lb capacity, the BrewZilla can mash nearly 50% more grain than similar sized models of the Anvil Foundry and Grainfather G30. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency. Concave Base with Center Draining Leave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind. Ultra Low Watt Density Elements The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy. Easy Access Built-In Pump The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet. If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer. MoreBeer!'s Final Word We’ve been selling all-in-one brewing systems ever since they first hit the market, and we have to say that the Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included. Perfect for Distillation If you want to expand your lineup of homemade libations to offer Spirits in addition to Ales & Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find. Features: Gen 4.1 Stainless steel construction 9 gallon total capacity with a finished beer output of 5-6 gallons WiFi/Bluetooth Enabled RAPT digital temperature controller Automatic step mashing with 6 programmable stages 220-240V power NEMA 6-30P plug Requires NEMA 6-30R receptacle Requires 11 amps from 30 amp circuit Dual heating elements (1900 watts and 500 watts) Stainless steel 1/2" ball valve for gravity draining or transferring via pump Immersion wort chiller included Stainless steel malt pipe/basket Stamped in volume markers Glass lid Adjustable lid clamps (do not use with glass lid in place - see below) Magnetic drive pump for recirculation, transfers, and cleaning Recirculation arm PPSU sight glass Bottom handle for easy lifting and pouring Rubber feet Temperature reads in °F or °C Approximately 32.75" H (with recirculation arm) x 12.5" D Recommended max. grain bill: 23.5 lbs AlcoEngine Still ready with the purchase of a Distillation Lid Pump Specs: Max Capacity: 2.9–3.1 gal/min Max Head: 4.9–6.8 ft. Poles: 2 Voltage: 220–240V-AC Frequency: 50–60Hz Power: 6 watts Current: 60 mA Speed: 2600–3000rpm Duty Cycle: Continuous Capacitor: 2µF Input/Output: 13mm barb Water Resistance: IPX2 You Will Need: 2' of H985 1/2" ID Silicone tubing for sparging and draining. To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950hose clamps and (1) brass hose by thread adaptor (H508). These items come in the Wort Chiller Connection Kit, add the kit to your cart and use code ZILLAKIT at checkout. KegLand Part Number: KL27434 Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Please Note: When removing the malt pipe to drain after mashing, it is important to do so slowly rather than in one swift pull. If the malt pipe is removed all at once when it is full of wort, it is possible for the draining wort to spray out and over the rim of the brewery through the perforated bottom. Remove the malt pipe slowly so that some of the wort can drain out before it is fully removed and set on its bottom feet. This can be done by hand on the 35L unit, but for the 65L and 100L units we highly recommend using the Pulley System for removing the malt pipe. Warning: Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. With too much tension, it is possible for the lid clamps to break the glass lid when engaged. Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use.   35L (110V) 35L (220V) 65L (220V) 100L (220V) 10 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 25 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 50 ft. 12 Gauge 12 Gauge 10 Gauge 8 Gauge   RAPT Gen 4 BrewZilla | User Manual

Read more less

The Flat Twister Lid comes with 3 pre-drilled holes perfectly sized for the Duotight bulkheads that come with the Temp Twister Cooling Coil and FermZilla Thermowell. Lid o-ring included. This lid is only recommended for FermZilla users that will be using the Temp Twister and the Thermowell together. Kegland Part number: KL15059

Read more less

Connects your new Counter-Pressure filler to your existing ball lock kegging system with a convenient, sealing quick-disconnect system. Having everything you need all in this kit makes set-up & use of your counter-pressure filler easier. If you have the Counter-Pressure bottle filler then this set is a must have!   Includes: Hardware to connect filler to gas system: Gas line tee, quick disconnect set, 6' of gas line.   Hardware to connect filler to keg: Threaded, black Beverage-Out Quick Disconnect, related flare fittings, 5' of beer line.   To Install: Shut off your gas. Cut your existing gas line assembly and clamp the Co2 Tee in that place. Clamp the gas line and beverage line to the Bottle Filler. Gas line on the larger barb fitting, beverage on the smaller barb. Make sure the counter pressure filler is closed by placing the valve handle perpendicular to the valve. Attach the beverage pin lock quick disconnect to your keg. Never attach a beverage out fitting to your keg without it being in a closed system. Connect the gas line quick disconnect. Finally turn your gas back on. You're ready to fill.

Read more less

1728 is ideally suited for the strong, malty ales of Scotland and versatile enough to be used as a "house" strain Ferments neutral and clean.  Higher temps will result in an increased ester profile Activator Smack-Pack System™ "proofs" the yeast and shortens lag time when it hits your wort When smacked, the Activator™ packet releases sugars and nutrients to initiate the culture's metabolism Wyeast has been a pioneer in craft brewing for over 35 years and is committed to creating the finest fermentation products available Although beneficial, cultures do not need to be activated prior to inoculation Our Scottish ale strain is ideally suited for the strong, malty ales of Scotland. This strain is very versatile, and is often used as a “House” strain as it ferments neutral and clean. Higher fermentation temperatures will result in an increased ester profile. Attenuation: 69-73% Flocculation: High Alcohol Tolerance: 12% Optimum Fermentation Temp: 55-75°F Cell Count: 100 Billion Styles: American Barleywine Baltic Porter Braggot Christmas/Winter Specialty Spiced Beer Foreign Extra Stout Imperial IPA Old Ale Other Smoked Beer Russian Imperial Stout Scottish Export 80/- Scottish Heavy 70/- Scottish Light 60/- Strong Scotch Ale Wood-Aged Beer For best results we always recommend ordering an ice pack with your liquid yeast. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.  

Read more less

This seal is a direct replacement of the lid seal that comes with the 2L stainless steal Ultimate Growler (GL750).

Read more less

Quickly diffuse oxygen or CO2 into your wort or finished beer with this convenient ball lock diffusion stone Attach to the Hop Bong Sight Glass and feed gas while liquid passes through Diffuse oxygen inline as chilled wort transfers from boil kettle to ferment Diffuse CO2 inline as cold crashed beer transfer from fermenter to keg This pre-assembled diffusion stone can be easily integrated with the Hop Bong Sight Glass to make an inline oxygenation system. At the top you have the Yellow Ball Lock Cap with PCO1881 threads that will install on the side port of the Hop Bong. A short piece of 3/16" ID silicone tubing is used to attach the 2 Micron diffusion stone which rests inside the Hop Bong. Connect your oxygen tank to the ball lock cap with a ball lock quick disconnect, turn on the gas, and pass your chilled beer from your kettle through the Hop Bong and into your fermenter. In the same fashion, this assembly can be used to help carbonate your beer by feeding CO2 into the ball lock cap and passing your finished beer from your fermenter through the Hop Bong and into your keg. A complete kit is coming soon, but here are the pieces you'll need to assemble your own Hop Bong Inline Diffusion System. 1.5" T.C. Hop Bong Sight Glass (FE201) (2) 1.5" T.C. Hop Bong Caps (FE203) (2) 1.5" Tri-Clamps (FF10) (2) 1.5" Tri-Clamp Gaskets (FF101) (2) Red Plastic Ball Lock Caps (FE13)

Read more less

New Kegs are trouble-free for years Rubber top and bottoms protect floors from dings Perfect laser welds ensure easy sanitation and reduced risk of contamination Made in Italy by AEB, a long-time manufacturer with impeccable attention to detail Imagine this…. you’re out camping with friends, and one of your buddies says he would love to have a cold brew. Then just picture the looks on their faces as you pull your brand new Cornelius Keg out of your cooler, full of your rich home brew! This 2.5 gallon corny keg is perfect for the serious home brewer who loves to brew ½ batches, or is just tight on kitchen space. It will fit pretty much anywhere from coolers to backpacks, in your keezer, or in your fridge. You’ll love the rubber tops on these 2.5 gallon kegs because they have two handles and are easier to stack! It is versatile, travels well and just looks cool! The quality of these Italian-made cornelius kegs is undeniable. They are welded by laser under inert gas which means there are no nooks or crannies where bacteria can hide. They may cost more than kegs made in China but the quality difference is a perfect batch versus a ruined one. Quality is important because your beer may sit in these kegs for months. If bacteria gets into a bad weld they are going to very hard to kill. Key Features: High quality Italian made ball-lock style kegs with rubber top and bottom Kegs are 15" tall, x 8.25" diameter and weigh 7.5 pounds. Max working pressure of 130 PSI.

Read more less

Thousands of food and beverage professionals and hobbyists have moved from less accurate and less precise optical refractometers to digital Brix measurement. Milwaukee’s MA871 is the ideal tool for winemakers, brewers, fruit and vegetable growers, maple syrup producers, and food producers. The MA871 is fast and easy-to-use with a response time under 2 seconds. Maintenance is a breeze with an easy-to-clean sealed flint glass prism and stainless steel well. The measurement technique and temperature compensation employ methodology recommended in the ICUMSA Methods Book (internationally recognized body for sugar analysis). Summary The Milwaukee digital BRIX refractometer is temperature compensated with a 0 to 85 percent BRIX range and ±0.2 percent accuracy. It is easy to use with simple two button operation and fast with a response time under 2 seconds. Maintenance is a breeze also with an easy-to-clean sealed flint glass prism and stainless steel well. Design Features Fast, accurate results with digital dual level LCD readout Easy measurement with just 2-3 drops of sample needed Results in less than 2 seconds Simple one-point calibration using distilled or deionized water Easy-to-clean stainless steel sample well Meter rated to IP65 as “dust tight” and protected against water jets Battery percent level indicator with automatic shut-off (batteries included) Automatic Temp. Compensation (ATC) Hard plastic case sold separate:  MA800. Range:0 to 85% Brix Resolution:0.1% | 0.1°C (0.1°F) Accuracy:±0.2% Brix | ±0.3°C | ±0.5°F  

Read more less

Remove the keg spear from your sanke kegs for cleaning and maintenance For use with US-standard D-Style sanke kegs Safe and easy hand operation Easily and safely remove the valve and spear on American Sanke kegs with this Sanke Valve/Spear Removal Tool from MoreBeer! This economical tool is available for a very competitive price when you order from MoreBeer!, and it is great for anyone who needs to remove their spear on a Sanke keg for cleaning or to repair damage. Note that this tool only presses the spear down to relieve pressure on the retaining ring, you will have to remove the ring by hand.

Read more less

BrewBuilt Bi-Metal Thermometers are top-of-the-line measuring instruments, made in the USA by Tel-Tru manufacturing.  Maintain the overall precision of your brew system with these incredibly accurate and generally superior thermometers.  These are produced according to strict standards, comparable to ISO9000 quality, and are set up with an 8 year manufacturers warranty boasting that quality. Bi-metal thermometers are the level of quality you want when a few degree difference results in a completely different malt profile on your beer.  While a bit more expensive, you won't ever mess up a batch because of incorrect temperature readings.  The 2.5" Stem is a perfect balance of being long enough to get accurate readings, while not protruding far enough to get hit by a wandering mash paddle or spoon. Are all bi-metal thermometers created equal? Not really. The problem with most bi-metal thermometers is that hang ups occur and you have to tap the thermometer to get an accurate reading. The cause of the problem is that the bimetallic helical coil in the stem of other bi-metal thermometers is tack welded to the stem itself. Our new line of thermometers feature a super sensitive bimetallic helical coil suspended from a copper coated bushing fixed in the stem. This superior design provides a faster response to temperature changes and assures more accurate readings. What does this mean? You don't have to tap the gauge with your finger as much. They are also accurate to 1% of the total range, feature a polished 3" 304 s/s housing, a hermetically sealed water proof case, glass face, external calibration capabilities, and a unique anti-parallax dial that provides for easy reading. The reading is actually taken from the last 2.5" of the probe. Features: Large 3" Dial Face for easy readings 2.5" Stem perfect for Boil Kettles and HLTs High Grade Stainless Steel Construction and hermetically sealed casing Can be calibrated with 1/16" Allen Wrench (Though should never be needed) Dual Scale Range: 0-220° F, -10 to 100° C Back Connection is 1/2" MPT, stem is 1/4" SS 8 year Manufacturer Warranty  

Read more less

3711 is a very versatile strain that produces Saison or farmhouse style beers as well as other Belgian style beers Highly aromatic (estery), peppery, spicy and citrusy Activator Smack-Pack System™ "proofs" the yeast and shortens lag time when it hits your wort When smacked, the Activator™ packet releases sugars and nutrients to initiate the culture's metabolism Wyeast has been a pioneer in craft brewing for over 35 years and is committed to creating the finest fermentation products available Although beneficial, cultures do not need to be activated prior to inoculation A very versatile strain that produces Saison or farmhouse style biers as well as other Belgian style beers that are highly aromatic (estery), peppery, spicy and citrusy. This strain enhances the use of spices and aroma hops, and is extremely attenuative but leaves an unexpected silky and rich mouthfeel. This strain can also be used to re-start stuck fermentations or in high gravity beers. Attenuation: 77-83% Flocculation: Low Alcohol Tolerance: 12% Optimum Fermentation Temp: 65-77°F Cell Count: 100 Billion Styles: Belgian Blond Ale Belgian Dark Strong Ale Belgian Golden Strong Ale Belgian Specialty Ale Bière de Garde Saison For best results we always recommend ordering an ice pack with your liquid yeast.   Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.    

Read more less

1" Ball Clamp Quick Clamp for Pipes. Pipe dimension Ø 18-35mm. Compatible with pipes with outer diameter 0.70" to 1.37".

Read more less

The insulation jacket reduces heat loss during brewing. Recommended for use outdoor or in colder environments. For B80pro brewing system.

Read more less

Replacement silicone seal for the 35L size Boiler Extension Kit. KegLand Part Number: KL22576

Read more less

Stainless steel coupler or "reducing socket". 1/2" BSPP x 1/4" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06415  

Read more less

16g threaded CO2 cartridges that work great with the KegLand Core 360 Mini CO2 Regulator or the Duotight Mini CO2 Regulator. Comes in a package of 6 cartridges. Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.

Read more less

This adapter can be installed on the Core 360 Mini Regulator from Kegland in order to use 74 gram CO2 cartridges. Use a crescent wrench to remove the stock adapter piece for 12 gram cartridges and simply screw in this adapter with 5/8-18 UNF female threading. Switching to 74 g cartridges will allow you dispense 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required. TR21-4 Male Thread x 5/8-18 UNF Female Thread Adapter only. Regulator and CO2 cartrdige sold separately. KegLand Part Number: KL2041

Read more less

The fitting is to be used in a KegLand Stainless Steel Quick Swivel Connectors in 1/2" Female NPT. This is the end cap only. Handy for terminating 1/2" Quick Swivel Connections. KegLand Part Number: KL31646

Read more less

This replacement rubber seal is for the sight glass featured on MB Brite Tanks size 3.5 bbl and above.  

Read more less