Keep the party flowin' with a KOMOS Jockey Box! The eye-catching stainless steel exterior isn't the only thing that distinguishes this beauty from ordinary jockey boxes. With forward-sealing Intertap faucets and all-stainless 50-foot draft coils, the KOMOS Jockey Box was designed from the ground up to keep your beer pouring with less foam for longer. These units with front entry design are perfect for serving from behind a bar. Instead of having the draft lines entering on one side and the faucets pouring from the other, these draft boxes have everything on the same side you'll be pouring from.
KOMOS Stainless Steel Jockey Box
Front off setting inlets for better access for pouring
100% stainless steel draft coils
Shanks & coils are custom designed for proper cooling and flawless pouring
The only draft box that uses stainless steel Intertap forward sealing faucets
Push-In coil design applies force toward shank connection to protect against shank and coil separation
Stainless steel Shank Plates protects the cooler from being damaged when tightening faucets and shanks
Stainless Steel construction on all serving components means this box will last for years
Premium Stainless Steel Cooler provides superior ice retention
Pairs perfectly with a KOMOS Connection Kit
Features:
54 Quart Stainless Steel Cooler
50’ Stainless Steel Coils (5/16” OD)
Stainless Steel Faucet Shanks
Stainless Steel Pass Through Shanks
Stainless Steel Flanges
Stainless Steel Forward Sealing Faucets
Black Tap Handles
Stainless Steel Shank Plates (inner & outer)
25" L x 18" W x 17.75" H
Weight: 32 lbs
The X1 Faucet has been used for many beverage dispense applications over the years including beer, soda, carbonated water and other beverages. This faucet is a great choice when you need to dispense very cold beer that might freeze a metal faucet. This configuration features a standard faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Lever Adjustment Food Grade (NSF Approved) plastic and stainless steel Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in "Creamer" function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
Great Replacement for a broken gauge.
Replacing a broken gauge on your pressure regulator is a snap with this Replacement Low Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.
1/4” MPT Right-hand thread.
This is the small o-ring that goes on the part that pierces the CO2 cartridge. Many times it will get blown out if someone removes the cartridge before the cartridge was really empty, blowing the o-ring off the valve.
Also work as a friction o-ring on our sparge arm assembly's on the brew sculptures.
Replacement O-ring for beer faucet tower shanks D1239 and D1242.
This O-ring sits underneath the coupling nut of the shank, behind the teeth where the shank connect to the faucet.
KegLand Part Number: KL88067
Replacement lever collar for Intertap or NukaTap faucets. This beer faucet part threads onto the lever and sits above the friction bonnet. Used to help adjust your tap handle to face forward if it is oriented at an angle when fully threaded onto the faucet lever.
The NukaTap FC is the world's only forward-sealing flow control tap that can use an auto close spring. By inserting the spring between the flow control device and NukaTap shuttle, the tap will automatically close when you let go of the handle. This is perfect for customers who may not be diligent enough to remember to completely turn off the tap after each pour. Or for those with little kids or pesky cats that knock everything around! This very inexpensive spring can save you from emptying an entire keg and then losing a whole bottle of gas.
Please note: this spring is not compatible with the standard non-flow control NukaTap faucet or the NukaTap Flow Control G2.
KegLand Part Number: KL17985
Love bringing a growler of your brew with you, but hate the waste and mess of filling it off your tap? Just pop this handy Stainless Steel Growler Filler into your faucet, attach an appropriate length of tubing, and proceed to fill from the bottom of the growler up!
Filling from the bottom upward will dramatically reduce foaming, which less mess and wasted beer! and fill away!
Faucet insert OD is 1/2”, barbed outlet is 3/8” OD.
This model fits standard faucets. Will not fit Perlick or Perl faucets as their nozzles have a different inner diameter. For Perlick faucets please checkout item D1224.
Show everyone you mean business with these 50 caliber BMG beer tap handles. Made from real, once fired, 50 caliber bullets that are hand polished and coated with an anti-tarnish lacquer. The 50 Caliber BMG is used in most of the military's heavy machine guns. A great addition to any man cave!
Fits all US Faucet levers, 3/8” – 16 UNC (Unified Coarse Thread).
Does not come with faucet!
Also called a faucet positioner because it angles big tap handles from touching the wall or refrigerator. Installs on top of beer faucet lever and then the tap handle thread into this bonnet angler. Made from chrome plated brass.
Keep your draft faucet in perfect working order. Replace your old ball washer to keep your faucet lever moving properly This is the first washer of a two part set (D1200C) With this washer you can renew a worn-out part on your well-used draft faucet. This replacement part is the first washer of a two part set that is used to control motion of lever.
The KOMOS shank wrench is designed to tighten the nut on the back of a faucet shank. It is double offset for clearance inside of coffin boxes and larger round towers and to move the handle away from the insulation or other nearby objects. Also super handy when tightening shanks inside a cold box when space is at a premium and it hard to fit a traditional wrench. Pubs have historically made their own, now you can get one the easy way.
Laser Cut from 12 guage 304 Stainless Steel. Offset 3/4" on each end to fit around insulation or inside of small towers.
Features:
1-1/16" 12 Point Wrench
1-1/8" 12 Point Wrench
Made from 304 Stainless Steel
Great Replacement for a broken gauge.
Replacing a broken gauge on your pressure regulator is a snap with this Replacement Low Pressure Gauge for CO2 or Nitrogen regulator. Installation is simple, and it prevents you from needing to buy a whole new regulator.
1/4” MPT Right-hand thread.
Kegerator draft line kit for a double tap tower.
Kit Includes:
Beverage line
Measures 4mm ID x 8mm OD (5/32" x 5/16")
1 x 5.5' length per tap
Gas line
Measures 5mm ID x 8mm OD (13/64" x 5/16")
1 x 8' length
Barbed tee fitting for splitting gas line
Hose clamps
Replacement internal seal for Stainless Carbonation and Line Cleaning Ball Lock Quick Disconnects. Only the stainless steel ball lock caps require these seals (KG50 & KG502). They are not needed for the Red & Yellow plastic versions. Comes in pack of 5. KegLand Part Number: KL21272
The Duotight Elbow Piece is suitable for 6.35 mm (1/4") PE tubing or most lines with a 6.35 mm outer diameter. Designed for use with stiff PE tubing that is commonly used in water treatment equipment, water filters, reverse osmosis fittings, and other appliances that are directly connected to water lines.
Duotight push in fittings have been engineered for maximised performance in both gas and liquid applications. No other push ins on the market have EPDM o-rings.
Features:
Insert tubing and firmly push to connect
Easily release tubing by pushing in the collet
Suitable for both gas & beverage applications
Made from food-grade acetal plastic
O-ring made from highly chemical resistant EPDM
Locking teeth made from stainless steel
Pressure rated to 150 psi
Temperature rated to 212°F (100°C)
Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
Kegland Part number: KL18449
Keep potential “beer-samplers” and kids out of your draft system with this Beer Faucet Lock.
Give yourself some peace-of-mind, knowing that your draft system is locked and your beer is safe. If you're a serious homebrewer this thought has crossed your mind: the thought of someone walking by and pulling on the tap handle, letting beer run out. Be it friends or your kids, you want your system to be secure. This quick and easy Beer Faucet Lock attaches directly to the faucet. It gives a solid squeeze on the handle, locking it into place, without fear of damaging it. This one-of-a-kind lock is something you’ll be glad you own.
Please note - this lock will not work with Perlick 650SS, 630SS or Intertap faucets
Keep your draft faucet in perfect working order!
If the lever gets stuck or is unused for a long time, it can break
Replace it to keep using your favorite tap handle and keep the beer flowing!
With this brass lever you can renew a worn-out part on your well-used draft faucet. This is the actual lever that opens and closes the faucet, and where the tap handle is threaded on. These levers can break if a faucet is left alone for too long and the lever gets stuck.
Use this quick disconnect set to seal a soda bottle under CO2 pressure. An ideal way to bring homebrew to a party without all the accessories.
TIP N' TRICK: Add a CO2 tee inline with your current CO2 setup and install the H481 Kent Shut-Off Female QD w/ 1/4 in Barb included. This way you always have access to CO2 accessible to put your beer under pressure before leaving for the party.
* A single-handed connection and disconnection
* Strong plastic that can handle 250 degrees, very durable, and is medical-grade compliant and made from FDA approved material
* Easy installation into your home brewery
* KENT Systems quarter turn design functions safely
The X1 Faucet has been used for many beverage dispense applications over the years including beer, soda, carbonated water and other beverages. This faucet is a great choice when you need to dispense very cold beer that might freeze a metal faucet. This configuration features a self-closing faucet lever, and a lever flow control adjustment system.
Please note: the faucet handle and draft shank in the example photo are not included.
Self-Closing, Lever Adjustment
Food Grade (NSF Approved) plastic and stainless steel
Full length European Flow Control (completely control restriction at the faucet;no restriction line needed)
Made in Germany and assembled in the USA!
Features a built in "Creamer" function so you can put a fine cream head on your beer
Used in restaurants and bars locally and abroad
Beautiful stainless steel construction Prime option for building your own draft box High density insulation for excellent cold retention Swinging rubber coated handles for easy carrying/loading Locking lid 54 qt capacity 24.5" x 17" x 18" Turn heads at your next cookout with the beautifully designed KOMOS Stainless Cooler. The gorgeous stainless steel construction is a classic look that never goes out of style and provides an indestructible exterior for a lifetime of use. Features high density insulation for excellent cold retention, stainless steel swinging handles with rubber grip, locking lid, and 54-quart capacity. The KOMOS Stainless Cooler is an ideal companion for camping trips, tailgaters, beach days, or wherever else you want to enjoy a cold, crispy beverage. If you're designing your own jockey box, this stainless cooler will definitely make a statement. Let your draft box shine! We love this cooler paired with the KOMOS Slimline Cold Plate, which will allow you to chill the beverage you're serving while still having plenty of room to store other food and drinks.
Replacement lever collar for Intertap or NukaTap faucets. This beer faucet part threads onto the lever and sits above the friction bonnet. Used to help adjust your tap handle to face forward if it is oriented at an angle when fully threaded onto the faucet lever.
Keep the party flowin' with a KOMOS Jockey Box! This extra beefy rotomolded Rubicon Cooler is an absolute beast and will surely outlast your run-of-the-mill jockey box. With forward-sealing Intertap faucets and all-stainless 50-foot draft coils, the KOMOS Jockey Box was designed from the ground up to keep your beer pouring with less foam for longer.
KOMOS Rubicon Jockey Box
100% stainless steel draft coils
Shanks & coils are custom designed for proper cooling and flawless pouring
The only draft box that uses stainless steel Intertap forward sealing faucets
Push-In coil design applies force toward shank connection to protect against shank and coil separation
Stainless Steel construction on all serving components means this box will last for years
Heavy-duty rotomolded Rubicon Cooler is virtually indestructible
High-density polyurethane insulation and compression lid for superior ice retention
Pairs perfectly with a KOMOS Connection Kit
Features:
37 Quart Rubicon Cooler
2 x 50’ Stainless Steel Coils (5/16” OD)
2 x Stainless Steel Faucet Shanks
2 x Stainless Steel Pass Through Shanks
2 x Stainless Steel Flanges
2 x Stainless Steel Forward Sealing Faucets
2 x Black Tap Handles
Jockey Box Specs:
23.25" L x 16.25" W x 16.5" H
35.3 lbs
