Manage your fermentation temperature like a stone-cold pro with the BrewBuilt Chilling Pump Kit! This kit can use either ice water or glycol as a chilling solution, which is then circulated through your chilling coil or cooling jacket by the included submersible pump. Available with either 800 or 1300 gallons per hour flow rate and a max lift height of nearly 10 feet, this unassuming pump is powerful enough to circulate your cold solution with ease. And with the Inkbird Dual Stage Temperature Controller running the show, you can feel confident that your fermenters are getting the chilling power they need, when they need it. Submersible Pump If you're searching for an affordable pump to use with your temperature control system, look no further. The BrewBuilt Chilling Pump Kit comes with either a 800 GPH or 1300 GPH submersible pump that can be used with an icebank or glycol chiller. Don't be fooled by the low-profile compact design. With such high flow rates and a max lift height or nearly 10 feet, either of these pumps is sure to keep the solution moving in your chilling system. In general, we recommend the 800 GPH pump for maintaining the temperature of any batch size fermentation that is less than 10 gallons, and the 1300 GPH pump for maintaining any batch size fermentation that is between 10 gallons and 2 bbl. Maximum flow rate: 800 GPH or 1300 GPH Max Lift Height: 9 or 10 ft. High quality motor provides a quiet environment (60W or 100W) Stainless steel impeller shaft for long life span and corrosion resistance 6 ft. long power cord Inkbird Digital Temperature Controller The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing. Inkbird controllers allow you to control both heating and cooling, and set independent differentials for each to protect your heating and cooling devices. The Inkbird ITC-308S controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control. Aside from brewing uses, this is a great dual relay output temperature controller for cooking (use in a smoker or BBQ), home growing (heat mats for seedlings, climate control), or any other DIY project you come up with! Features: Simple plug and play design with user friendly LED interface Dual stage ITC-308 - control both heating and cooling Adjustable Heating/Cooling differential 1000W max power Celsius or Fahrenheit High and low temperature and sensor fault alarms Can control temperatures of -58° F through 210° F (-50° C - 99° C) Body Dimensions: 5.5 in x 2.7 in x 1.3 in Chilling Pump Kit Includes: Submersible Water Pump (PMP601 or PMP602) Inkbird Dual Stage Digital Temperature Controller (FE640) 2x 5 ft. lengths of 3/8 in. Silicone Tubing (H983) 4x Butterfly Hose Clamps Stainless 3/8" Barb x 1/2" MPT Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
The Taprite beer carbonation tester is designed to be used in the field to verify carbonation levels during equipment installation and keg change-outs. It is a cost effective and accurate tool for troubleshooting and quality control. The carbonation tester's sturdy, 11-ounce acrylic canister includes a handy label noting the appropriate CO2 volume based on your temperature and pressure reading. The tester's cap and fittings are made of lightweight metal with easy to grip knurling. The pressure gauge includes a protective rubber boot (600gps-01) for additional durability. Taprite's beer carbonation tester is easy to handle, easy to use, and easy to clean. Each tester comes with a cushioned carrying case, as well as inlet and outlet hoses with quick disconnects.
Taprite Part Number: 2701-bct
If you're ready to step up to all grain brewing, this converted insulated cooler works wonders as a mash tun! The 14-gallon size can hold upwards of 25 lbs of grain, so there's plenty of room for even the strongest 5-gallon beer recipes and is perfect for most 10 gallon batches up to 1.070 SG. Comes pre-assembled with stainless steel perforated false bottom, high temperature silicone tubing, and 1/2" female threaded ball valve. Pair the valve with the male threaded fitting (plus a little plumber's tape) that best suits your setup and you'll off and running. The cooler also works perfectly as a Hot Liquor Tank. Use with the false bottom in place, or simply remove it and keep it on hand in case you decide to use the cooler as a Mash Tun down the road. Two of these coolers plus the Fermentap Sparge Arm Assembly work perfectly as a gravity fed all-grain setup. To connect the cooler's ball valve to the sparge arm assembly, we recommend a 1/2" MPT x 3/8" Barb fitting and 3/8" ID silicone tubing. Plumber's tape will ensure you have a leak-proof connection between the barb fitting and the ball valve. Includes: Insulated beverage cooler Max Volume: 14.7 Gal (56 L) Stainless dome-shaped perforated false bottom High temperature silicone tubing Stainless 1/2" BSP ball valve External Dimensions: Approx. 19" L x 19" W x 22" H KegLand Part Number: KL04671 Please note: the mash tun may come with a little extra silicone tubing than what's needed. Check that your false bottom is sitting flat and in the middle of the cooler and cut off excess tubing if needed.
Beautiful stainless steel construction Prime option for building your own draft box High density insulation for excellent cold retention Swinging rubber coated handles for easy carrying/loading Locking lid 54 qt capacity 24.5" x 17" x 18" Turn heads at your next cookout with the beautifully designed KOMOS Stainless Cooler. The gorgeous stainless steel construction is a classic look that never goes out of style and provides an indestructible exterior for a lifetime of use. Features high density insulation for excellent cold retention, stainless steel swinging handles with rubber grip, locking lid, and 54-quart capacity. The KOMOS Stainless Cooler is an ideal companion for camping trips, tailgaters, beach days, or wherever else you want to enjoy a cold, crispy beverage. If you're designing your own jockey box, this stainless cooler will definitely make a statement. Let your draft box shine! We love this cooler paired with the KOMOS Slimline Cold Plate, which will allow you to chill the beverage you're serving while still having plenty of room to store other food and drinks.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Just like our popular D1000 but with enough hardware to allow for two kegs to be tapped at the same time.
Kit includes:
Aluminum CO2 tank (new)
Dual gauge regulator
Two Faucets(SS lever),knobs and shanks
Stainless steel drip pan
Two Sanke keg valve taps
All hoses, clamps and instructions
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
Protect your regulator from damage in the event your tank gets knocked over. A Gauge Cage is cheap insurance that can help save you a costly regulator replacement.
Mounting bolt and washer included.
CO2 and Nitrogen tanks, especially the 5lb size most brewers use, are notoriously wobbly and easy to knock over once the regulator is mounted on them. This handy Gauge Cage helps protect the gauges themselves, as well as the fragile points where they thread into the regulator body, from damage in case of a fall.
Specifically sized to fit our D1060 and D1070 Taprite brand ragulators, these cages may not fit some budget regulators manufactured overseas.
Perfect for mobile draft dispensing with the NukaTap Mini Beer Faucet Clamp onto a cooler to make a jockey box without needing to drill out shank holes Makes for a great temporary shank option for kegerators and keezers when you need an extra tap This bracket is compatible with ice chest coolers and fridges that are up to 3.5" thick. It can be adjusted to have the wing nut clamp in either direction, simply unscrew the flange piece from the threaded rod, then unscrew, then thread from the opposing side. Please note: This item does not include the Mini NukaTap or Shank pieces. It is simply the stainless steel bracket. Recommended Accessories: NukaTap Mini Faucet (D1598) Wall Mount Shank Kit w/ 6.35 mm Duotight (D1598D) Self Closing Spring (D1598A) 6.35 mm OD EVABarrier Tubing (D1723C) KegLand Part Number: KL22002
What's cooler than being cool? Ice Cold. And that's just what your beer will be when stored in the KOMOS Rubicon Cooler. With durable rotomolded body, high density polyurethane insulation, and compression seal lid, the Rubicon will hold ice for days on end, even in the hottest of climates. Rotomolding is a procedure that ensures every part of the cooler is made with a continuous thick wall with minimal imperfections. This makes the cooler extremely tough, and is one of the features that have made YETI® coolers such a hit. The Rubicon is the ideal sidekick for camping trips, tailgaters, beach days, or wherever else you want to enjoy a cold beverage that tastes like it came straight out of the fridge. If you're designing your own jockey box, we highly recommend the Rubicon Cooler. High density polyurethane foam walls offer superior insulation compared to cheaper ice chest options, which means ice will hold for far longer and ensure your draft box doesn't warm up before you're done pouring beers. We love this cooler paired with the KOMOS Slimline Cold Plate, which will allow you to chill the beverage you're serving while still having plenty of room to store other food and drinks. Features: Rotomolded body High density polyurethane insulation Lockable compression lid with high quality seal Polyester rope handles with molded grips Side drain outlet Rubber feet Capacity: 44 x 12 oz cans (2 layers standing) 30 x 16 oz cans (1 layer standing, 1 layer laid down) Both configurations will have plenty of room for ice! Specifications: Internal dimensions - 18" long x 11" wide x 12" deep External dimensions - 23.25" long x 16.25" wide x 16.5" tall Empty weight - 22.75 lbs 35 Liters (9.25 Gallons)
Few materials are more durable or more attractive than stainless steel, which is exactly what sets this Stainless Steel Wort Chiller from MoreBeer! apart from similar chillers. This high quality stainless wort chiller includes 8 feet of vinyl tubing attached to both the in and out using a female garden hose fitting on the “in” side, as well as 25 feet of stainless steel tubing measuring 3/8 inch diameter.
Although stainless steel takes a little longer to cool your worth than comparable copper tubing, its advantage is that it won’t tarnish between uses. Stainless steel is also much more affordable than copper, which makes this an economical choice that won’t sacrifice quality or real-world effectiveness. This stainless steel wort chiller also contains a brass hose adapter for an even more attractive, high quality look and feel.
The Stainless Steel Wort Chiller 25’ x 3/8” from MoreBeer! is made entirely in the U.S.
Note: The inner bend on the coils have small indentations that are a natural result of the winding process used during manufacturing. As an upside, these do actually help turbulate the cooling water to eliminate laminar flow (helps increase the cooling capacity).
Product Specifications
25' Stainless tubing
8' Vinyl Tubing
Brass Hose Adaptor
10" diameter
8" to the top coil
15" to the bend to go over the lip of the kettle.
25 Feet of 3/8" Copper
Coils Raised Up To Where The Heat Is
Integrated Turbulator
Cools Faster and Uses 40% Less Water
25 Feet of 3/8" Copper
Includes Tubing and Standard Garden House / Utility Sink Thread
Manufactured in the USA
Save water during the cooling process with our Super Efficient Immersion Wort Chiller. During the manufacturing process we build in an inner water turbulator that causes the cold water to spin through the coil. This reduces the laminar flow found in a standard wort chiller where only the outer water is cooled as it travels through the coil. The result is a 40% reduction in water, and faster cooling, when compared with our standard chillers. But that is when we compare it to OUR standard chillers with the coils at the top. When you compare to other chillers on the market the results are even better.
ALL of our chillers feature coils that raised up to where the heat is. As we learned in school heat rises so when other wort chillers have all the coils on the bottom they actually never cool unless you stir your wort. The problem with stirring is that you mix up all your trub/sediment and you risk airborne contamination... neither of which is good. Our chillers cool fast and allow you to keep your lid on your kettle during the critical cooling period.
Constructed from 25' of 3/8'' copper tubing. 8' of vinyl tubing attached to both the in and the out with a female garden hose fitting on the in side. Use our CE21S hose thread adaptor to attach to your sink. Perfect for a kitchen environment where the sink is close by.
This size chiller is ideal for our 8 Gallon Heavy Duty Kettles!
The measurements are: Approx. 10" diameter, 8" to the top coil, 15" to the bend to go over the lip of the kettle.
Keep the party flowin' with a KOMOS Jockey Box! This extra beefy rotomolded Rubicon Cooler is an absolute beast and will surely outlast your run-of-the-mill jockey box. With forward-sealing Intertap faucets and all-stainless 50-foot draft coils, the KOMOS Jockey Box was designed from the ground up to keep your beer pouring with less foam for longer.
KOMOS Rubicon Jockey Box
100% stainless steel draft coils
Shanks & coils are custom designed for proper cooling and flawless pouring
The only draft box that uses stainless steel Intertap forward sealing faucets
Push-In coil design applies force toward shank connection to protect against shank and coil separation
Stainless Steel construction on all serving components means this box will last for years
Heavy-duty rotomolded Rubicon Cooler is virtually indestructible
High-density polyurethane insulation and compression lid for superior ice retention
Pairs perfectly with a KOMOS Connection Kit
Features:
37 Quart Rubicon Cooler
4 x 50’ Stainless Steel Coils (5/16” OD)
4 x Stainless Steel Faucet Shanks
4 x Stainless Steel Pass Through Shanks
4 x Stainless Steel Flanges
4 x Stainless Steel Forward Sealing Faucets
4 x Black Tap Handles
Jockey Box Specs:
23.25" L x 16.25" W x 16.5" H
45.7 lbs
Keep the party flowin' with a KOMOS Jockey Box! This extra beefy rotomolded Rubicon Cooler is an absolute beast and will surely outlast your run-of-the-mill jockey box. With forward-sealing Intertap faucets and all-stainless 50-foot draft coils, the KOMOS Jockey Box was designed from the ground up to keep your beer pouring with less foam for longer.
KOMOS Rubicon Jockey Box
100% stainless steel draft coils
Shanks & coils are custom designed for proper cooling and flawless pouring
The only draft box that uses stainless steel Intertap forward sealing faucets
Push-In coil design applies force toward shank connection to protect against shank and coil separation
Stainless Steel construction on all serving components means this box will last for years
Heavy-duty rotomolded Rubicon Cooler is virtually indestructible
High-density polyurethane insulation and compression lid for superior ice retention
Pairs perfectly with a KOMOS Connection Kit
Features:
37 Quart Rubicon Cooler
2 x 50’ Stainless Steel Coils (5/16” OD)
2 x Stainless Steel Faucet Shanks
2 x Stainless Steel Pass Through Shanks
2 x Stainless Steel Flanges
2 x Stainless Steel Forward Sealing Faucets
2 x Black Tap Handles
Jockey Box Specs:
23.25" L x 16.25" W x 16.5" H
35.3 lbs
If your Taprite Regulator is drifting or losing pressure, why not try repairing it rather than replacing? Over time the internal diaphragm can wear out resulting in drifting pressure or a slow leak through the regulator body Refurb your unit with this Regulator Rebuild Kit and return your Taprite regulator to it’s lost glory.
Works with Taprite CO2 or N2 regulators. Not intended for other regulators.
Taprite Part Number: 7740-19-SP
Keep your catch of the day fresh with the Igloo® Marine Ultra 54 Quart Cooler. It’s designed with Ultratherm® insulation for optimal cooling performance and has an integrated fish ruler on the lid. The marine-grade design can withstand to the wet conditions and features rust-resistant stainless steel screws, ultraviolet inhibitors, and a stainless steel hinged latch.
Features:
Ultratherm® insulated lid offers cooling performance
Holds 83 cans
Features an integrated fish ruler on lid
Ultraviolet inhibitors protect the cooler against sun damage
Rust-resistant stainless steel screws and lid strap
Stainless steel hinged latch
Recessed triple-snap drain plug makes clean up simple
Marine-grade hinges
Non-slip grip handles provide comfortable carrying
Capacity: 54 Quart
Dimensions: 26.375” x 15.5” x 15.5”
Weight: 8.1 lbs.
Manufacturer’s warranty: 1-year
Country of Origin : United States of America
Style : 44683
DSG Pro Tips
Brand : Igloo
With the MoreBeer! Jockey Box your beer will pour cold for hours! Take it camping, tailgating, or just pull it out when the gang is over. A Jockey box (or draft box) is a portable dispensing system used to cool beer as it travels inline from the keg to the faucet. The MoreBeer! Jockey Box includes an insulated cooler, a 50' x 3/8" stainless steel coil, shank and beer line clamps.
Our jockey box does not include a faucet or tap handle as standard, allowing you to pair it with the faucet model of your choice. Select your desired faucet from our add-on system above.
A favorite innovation in our draft box design is that we use larger 3/8" OD stainless steel tubing, which has two advantages over designs offered by other companies:
It cools a greater volume of beer, and cools it faster. The coil will hold approximately 33 oz of beer at a time.
The larger diameter line offers less resistance, which lets you push the beer with less CO2 pressure. Our boxes require about 10-15 psi from the CO2 tank to push the beer from the keg to the faucet (same pressure you use to dispense at home). Because the vast majority of beer lovers opt to keep their beer cool at all times to protect flavor (especially a homebrewer who is going to retap the same kegs at home!) and reduce foaming issues, most people opt to also ice the keg. The low applied pressure of 10-15 psi means that if you leave the system hooked up overnight, the beer will not over carbonate. If you do not plan on keeping the keg cold, which is perfectly fine, our system still works great because you can disconnect the line (if left for days) to keep the beer from losing carbonation.
We do not use shanks on the back side of our boxes. We drill holes slightly smaller than the line size so that a tight seal is created but you can still pull the line in when not in use, without having a wrench on hand. This makes storage and transport extremely easy. You will appreciate not having lines flopping everywhere.
You will need to purchase the appropriate keg couper for your commercial keg or quick disconnects for your homebrew keg. You will also need a CO2 system, comprised of a CO2 tank and regulator.
Tips For Best Results:
It is much more likely for a beer left at a high psi to overcarbonate (become foamy) than a beer left at a low psi to lose carbonation. The reason is that gas will always keep coming from the regulator until the gas/beer pressure have reached an equilibrium, so over time the high psi setting becomes the pressure in the beer. However, for a beer to lose carbonation it has to come out of solution into the headspace in the keg. Because the headspace is limited, only so much CO2 can come out, and the keg pressure will not drop all the way down to the lower regulator pressure on its own. This is the reason that if you have overcarbonated a beer you have to repeatedly vent the keg, reducing the pressure in the headspace to 0, and allowing more gas to escape from the beer.
For the best performance when using a draft box, tests have shown that ice water is actually the most effective at cooling the coils. So, as the ice melts, do not open the drain valve on the cooler. Draft boxes with Cooling Plates (stainless coil embedded in aluminum) are designed to work with the valve open, ours is not.
Keep the party flowin' with a KOMOS Jockey Box! This extra beefy rotomolded Rubicon Cooler is an absolute beast and will surely outlast your run-of-the-mill jockey box. With forward-sealing Intertap faucets and all-stainless 50-foot draft coils, the KOMOS Jockey Box was designed from the ground up to keep your beer pouring with less foam for longer.
KOMOS Rubicon Jockey Box
100% stainless steel draft coils
Shanks & coils are custom designed for proper cooling and flawless pouring
The only draft box that uses stainless steel Intertap forward sealing faucets
Push-In coil design applies force toward shank connection to protect against shank and coil separation
Stainless Steel construction on all serving components means this box will last for years
Heavy-duty rotomolded Rubicon Cooler is virtually indestructible
High-density polyurethane insulation and compression lid for superior ice retention
Pairs perfectly with a KOMOS Connection Kit
Features:
37 Quart Rubicon Cooler
4 x 50’ Stainless Steel Coils (5/16” OD)
4 x Stainless Steel Faucet Shanks
4 x Stainless Steel Pass Through Shanks
4 x Stainless Steel Flanges
4 x Stainless Steel Forward Sealing Faucets
4 x Black Tap Handles
Jockey Box Specs:
23.25" L x 16.25" W x 16.5" H
45.7 lbs
A unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your ferment to keep temperatures down. It can be used in a tank, macrobin, or barrel. The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop.
Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight.
.75 Square Meters of Cooling Surface
Can also be used for heating
Optional silicon sleeve available for sealing
Glycol power packs for cooling fermentations of beer and wine, and also used for maintaining temperature for draft beer dispensing. These glycol packs are perfect for controlling temperature during fermentations. They can be used with cooling plates and snakes for macro bin fermentation, as well as connected to tanks via cooling jackets.
Features
2300 btu
Digital Thermostat
Max distance of glycol "out" line - 125 Feet.
Vane (Procon) with 1/3 HP Motor
115V Power
11.5 gallon bath capacity
Dimensions: 27-1/2"H x 18"W x 29"D
Weight: 120 pounds
Easily dispense both chilled and carbonated water from a single, elegant tap, making it a perfect match for any under-counter filtration or carbonation system
The tap is designed to work seamlessly with various setups, including keg-based systems for chilled or sparkling water and compact under-counter units like the Benchy Sparkling
Made from high-quality stainless steel, this tap is built to last and provides a clean, modern aesthetic that complements any kitchen or bar counter
This dual-outlet stainless steel tap is perfect for dispensing cold filtered water, sparkling water, or ambient temperature water. It's a great choice for systems like the Benchy Sparkling or other filtered water and reverse osmosis (RO) setups.
This tap is an ideal component for a variety of filtered water systems. We offer it specifically for customers who want to dispense chilled or chilled and carbonated water.
Here are a few ways to use this tap to get chilled or sparkling water:
For chilled water, simply place a ball lock keg in your fridge, run your mains water supply through the keg, and then into this tap.
For chilled and sparkling water, you can use a carbonation reactor lid with a keg. This option lets you chill and carbonate water at the same time.
For a complete under-counter solution, the Benchy Sparkling unit is an excellent choice. You can connect your mains water supply to this compact unit, and it will deliver chilled and carbonated water directly to this tap.
Fits benches/counters up to 1.96" (50mm) thick.
Includes 2 x Duotight 6.35mm push in fittings as standard for connecting to 4mm x 6.35mm PE Water Line.
If you are using this with a Benchy Sparkling you will need to step the line up to 8mm. We would recommend this fitting down the line. (Do not attach to the barbs of the tap, they are too wide to fit without leaking.)
KegLand Part Number: KL23917
Keep the party flowin' with a KOMOS Jockey Box! This extra beefy rotomolded Rubicon Cooler is an absolute beast and will surely outlast your run-of-the-mill jockey box. With forward-sealing Intertap faucets and all-stainless 50-foot draft coils, the KOMOS Jockey Box was designed from the ground up to keep your beer pouring with less foam for longer.
KOMOS Rubicon Jockey Box
100% stainless steel draft coils
Shanks & coils are custom designed for proper cooling and flawless pouring
The only draft box that uses stainless steel Intertap forward sealing faucets
Push-In coil design applies force toward shank connection to protect against shank and coil separation
Stainless Steel construction on all serving components means this box will last for years
Heavy-duty rotomolded Rubicon Cooler is virtually indestructible
High-density polyurethane insulation and compression lid for superior ice retention
Pairs perfectly with a KOMOS Connection Kit
Features:
37 Quart Rubicon Cooler
2 x 50’ Stainless Steel Coils (5/16” OD)
2 x Stainless Steel Faucet Shanks
2 x Stainless Steel Pass Through Shanks
2 x Stainless Steel Flanges
2 x Stainless Steel Forward Sealing Faucets
2 x Black Tap Handles
Jockey Box Specs:
23.25" L x 16.25" W x 16.5" H
35.3 lbs
Introducing the Ss Glycol Chiller 3/8 HP, which will maintain lager temps and enable crash cooling for up to 6 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system.
Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this set up offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery.
Features:
Pumps not included, attach up to 6 FTSs Touch kits (sold separately)
Capable of crash cooling and lagering
Assuming one vessel is crash cooled at a time:
Chills Up to 4 - 1 BBL Chronicals, Unitanks or Brite Tanks
Chills Up to 6 - 1/2 BBL, 14, or 7 gal Chronicals or Unitanks, 10 or 20 gal Brite Tanks
Chills up to 6 - 14 or 7 gal Brew Buckets
Not Compatible with the FTSs Pro Series Controllers
Specs:
Vertical chassis layout
120 VAC 3/8 HP Compressor
3576 BTUs/Hr
10 Gallon Reservoir with Pressure Vent
R290 Refrigerant
Casters included
Made in France
Dimensions: 18" W x 18" D x 28" H
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more inventory.
Few materials are more durable or more attractive than stainless steel, which is exactly what sets this Stainless Steel Wort Chiller from MoreBeer! apart from similar chillers. This chiller is made from 50 feet of stainless steel tubing measuring 1/2 inch diameter.
Although stainless steel takes a little longer to cool your worth than comparable copper tubing, its advantage is that it won’t tarnish between uses. Stainless steel is also much more affordable than copper, which makes this an economical choice that won’t sacrifice quality or real-world effectiveness. This stainless steel wort chiller also contains a brass hose adapter for an even more attractive, high quality look and feel.
The Stainless Steel Wort Chiller 50’ x 1/2” from MoreBeer! is made entirely in the U.S.
Note: The inner bend on the coils have small indentations that are a natural result of the winding process used during manufacturing. As an upside, these do actually help turbulate the cooling water to eliminate laminar flow (helps increase the cooling capacity).
Product Specifications
50' Stainless tubing
Brass Hose Adaptor
12.75" diameter
12" to the top coil
23" to the bend to go over the lip of the kettle.
Stainless-steel heat exchanger plate designed to be placed under GOliner for temperature control. Includes electric ON/OFF control valve with cable for connection to the GOfermentor controller for automatic temperature regulation. Simply drops into GObase with no installation or modification necessary.
Requires chilled water/glycol through 1/2" MNPT connections. Chiller not included.
You may have a hard time finding a more affordable counter flow wort chiller. For the homebrewer on a budget, these heat exchangers are one the fastest ways to chill wort. Similar in efficiency to the Chillout plate chiller, but much easier to clean. Plate chillers have the disadvantage of getting gunked up in their small crevasses due to trapped hop material. This unit, on the other hand, can be easily and effectively flushed after use. Copper is a great conductor of heat, making it more efficient than a stainless chiller of similar design. These units are 9" in diameter and about 7" high. The input and output are approximately 3/8" outer diameter (9.5 mm). They can be used with gravity, but we recommend using a pump. Check out the video below to learn how to set up the chiller with Duotight fittings (DUO115 & DUO116) that will allow you to attach Camlock, QD, or garden hose fittings to the inputs and outputs, and enable you to control the flow rate at the water inlet. Fittings not included. Kegland Part Number: KL02035
A unique alternative to cooling plates. This tube-within-a-tube snake is used to recirculate glycol or cooled water through your ferment to keep temperatures down. It can be used in a tank, macrobin, or barrel. The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop.
Snakes are outfitted with 1/2in. male NPT threads on both the inlet and outlet. The inlet is at 90 degrees and the outlet is straight.
1.2 Square Meters of Cooling Surface
Can also be used for heating
Optional silicon sleeve available for sealing
The Johnson digital temperature controller is used to control the temperature of a refrigerator, or similar cooling or heating device. Enter your desired temperature, called set point, and how tightly you want your temperature maintained, called differential, and let the controller do the rest.
Ranco Vrs. Johnson
This Johnson digital temperature controller is very similar to our popular Ranco brand controller (FE610) in application and appearance. The advantage of the Ranco is being able to switch between cooling and and heating from the digital interface, while with the Johnson you have to take the cover off and physically remove a jumper. The advantage of the Johnson is the very attractive price.
For technical aficionados the Johnson does have a feature called Anti-Short Cycle Delay. Cycling is the rapid turning off and on of an electrical device. Over time cycling can harm your appliance. The Johnson controller allows you to set a time interval, in minutes, that keeps the controller from turning on right after it shuts off no matter what the temperature reading is. This can be very useful when you are using a 1 degree of differential setting for tight control but want your compressor or power supply to have a minimum time period of rest before it turns back on. Temperature Range of -40 to 212F.
Now you can pour your favorite Stouts, cold brew coffee’s, wine, cocktails and more with our exclusive nitro tap accessory! This commercial quality tap is made from all 304 stainless steel and effortlessly attaches to our stylish 64oz and 128oz pressurized growler. Featuring a gorgeous Pakkawood turned handle with an elegant 304 stainless steel spout, this beautiful diffused tap will elegantly serve cold brew coffees and stouts with that trademark “nitro” cascading effect we have all come to love! Solid construction also means easy to clean, simply disassemble the tap, wash with your favorite cleaner, and rinse.
The Blichmann Therminator Wort Chiller is one of the most popular tools to use when chilling your wort, as it gets the job done quickly, effectively and without much effort from you. This particular chiller has 40 plates and 316 stainless steel plates and fittings. It features ½ inch MPT for the wort in and out, and a ¾ inch MPT garden hose thread for the water in and out. You’ll be able to chill just like the pros when you use the Blichmann Therminator Wort Chiller, as it is extremely similar to the chillers used in commercial breweries.
The Therminator chiller is small but mighty, with the capability to chill 10 gallons of wort down to 68 degrees when using 58 degree water in just five minutes! It measures an ultra compact 7.5 inches wide, 4 inches deep and 3 inches high, which also makes it very easy to clean and sanitize. It is brazed together with pure copper in an oxygen-free furnace so there are no potential leaks, and it even comes with heavy gauge stainless mounting bracket to keep your system looking sturdy and seamless.
All 316 stainless steel plates and fittings.
Chill like the pro's - Identical to commercial brewery chillers.
Brazed together with pure copper in an oxygen free furnace - no potential leaks like a gasketed unit.
Chill 10 gal in 5 min to 68°F using 58°F cooling water at 5 gpm.
Ultra compact (7.5" W, 4" D, 3" H)
Easy to clean and sanitize - small enough to boil!
Garden hose thread connections on water side - no extra adapters to buy.
1/2" male NPT fittings on wort side mates up with virtually all common hose connector types. Much easier to sanitize than female fittings.
Comes with heavy gauge stainless mounting bracket
Instant and infinite sparkling water at your fingertips whenever you want it! Benchy connects to your household's water supply, chills, carbonates, and delivers on demand Serve up to 8 gallons of chilled, carbonated water per hour Pair with draft faucets and place it on your counter, or install it under the counter and plumb it to a mounted water faucet See below for detailed installation video Benchy Sparkling is the answer for instant chilled and carbonated water on demand. Simply connect your household water supply and CO2 Cylinder to the unit and receive unlimited sparkling and chilled water from the draft faucets. The chiller is highly efficient with very little power draw while idle and has enough cooling capacity to serve up to 8 gallons of sparkling water per hour. This unit comes without shanks or draft faucets, as it can be used as a countertop unit or installed under your counter and routed to a faucet you install on your counter or kitchen sink. If you plan to use it as a countertop unit, we highly recommend NukaTap Flow Control Faucets. Easy Installation: Plug the Benchy into the wall Fill internal water tank Connect household water supply Connect CO2 Cylinder Pour chilled sparking water. It's that simple and you can be enjoying chilled sparkling water in under 1 hour with this setup and barely any time at all to cool down. Ensure that the unit is installed and operated according to the instruction manual which can be found below. Fully Adjustable The Benchy Sparkling has an integrated digital temp controller so you can control the temperature from 0.5-10°C (33-50°F). You can also vary the carbonation level from 0.5 volumes to over 5 volumes for super bubbly water. Cooling Performance The Benchy Sparkling is able to chill about 5 to 8 gallons of sparkling water per hour (based on ambient water and air temperature of 68°F). To further increase the capacity of this unit, you can pre-chill the water from your household supply line either by a holding tank (ball lock keg) in the fridge or a DraftMaster Chiller. If you pre-chill the water you can more than double the output of the Benchy Sparkling. The reservoir temperature on the Benchy should never be set below 2°C (35°F) as you will run the risk of freezing the water inside the carbonation keg. Specifications: 110V Refrigerant: r600a (80 grams) Cooling Power: 600 watts Power Consumption: 155 watts (idle power consumption less than 5 watts) Capacity: approximately 6.6 gal/hour (based on 68°F ambient temperature) Input Gas: CO2 @ 29-50 psi (Requires 8mm (5/16") OD tubing) Input Water: Must be 15 psi higher than gas pressure (Requires 6.35mm (1/4") OD tubing) Sparkling/Chilled Water Out: Requires 8mm (5/16") OD tubing Dimensions: 18.3" H x 11.4" W x 20.5" D (Excluding sight glass that can be removed) Recommended Accessories: CO2 Gas Cylinder CO2 Regulator EVABarrier 4mm x 8mm Tubing PE Water Line Tubing 6.35mm Duotight In-Line Regulator (0-150 psi) Duotight Reducer - 8mm x 6.35mm 8mm Duotight Check Valve Diverter Valve (check water line connection for the size you'll need) Countertop Installation Recommended Accessories: (2) Short Shanks & Hex Nuts (2) Duotight Adapters - Beer Thread x 8mm (2) NukaTap FC Faucets& Self Closing Springs (2) Tap Handles (of your choice) Tube Cutter Faucet & Shank Wrench KegLand Part Number: KL2068
