Tight temperature control is a vital part of creating quality beer. That’s why our Fermenator™ Jackets ensure even temperatures, minimal condensation, and top-notch energy efficiency. From the reflective radiant barrier to the thick closed cell foam insulation, you won’t find better performing jackets anywhere!
Please Note: These jackets are only compatible with the F3 Fermenator™. They are not compaible with the G4 Fermenator™.
Automatically release pressure inside your fermenter during pressure fermentations
Regulate beer flow during pressurized transfers from fermenter to keg
Large triple scale pressure gauge with extended 0-40 PSI pressure range
Diaphragm spunding valves offer higher accuracy compared to spring & poppet spunding valves
Comes complete with ball lock QD, Duotight adapter, tee, and rigid joiners
With this complete kit you'll be ready to use the Blow Tie Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures.
Pressure Fermentation
Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately, you need a way to release excess pressure. You'll pressurize your vessel to your desired psi, but once fermentation begins and those hungry, active yeast start creating CO2, the pressure inside the vessel will increase. Attach a spunding valve and set it to your desired pressure, and it will blow off when the pressure gets to high and close up again when it's back to your desired psi.
Pressure Transfers
Even if you don't have a pressurizable fermenter, you may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process.
Diaphragm vs. Poppet
With the poppet style spunding valve, a spring pushes against a poppet to keep the valve closed. When the poppet lifts up to open, the surface area the gas pushes against becomes larger, and the spring has to work harder to push the poppet down and reseal the valve. This can lead to more gas being released than intended, and the remaining pressure in your vessel may be at a lower psi than your spunding valve’s set psi.
Instead of a poppet, the spring inside the BlowTie pushes against a diaphragm, which has an immensely larger surface area. This means the surface area that the gas pushes against while the diaphragm is closed is significantly closer to the surface area it pushes against when the diaphragm is open. This leads to higher accuracy, and the remaining pressure after excess gas is released will be much closer to your set blow off pressure.
Kit Includes:
BlowTie
Pressure Gauge (0-40 psi)
Ball Lock Disconnect
Duotight Tee & Flared Duotight Fitting
2x Lengths of EVABarrier 8mm OD Tubing
The Pop Cultures Food Fermentation Screen keeps fermenting vegetables submerged in brine to eliminate the mold that happens when they float to the top and become exposed to air. It was designed to fit in the neck of our 1-gallon glass glass jars. Fill the jar to the top with brine to keep the jar full and veggies submerged. Depending on the length of your fermentation you may top up with a little additional water or brine as required. This ingenious little device replaces glass weights that do not work as well in the 1 gallon jar.
It also works well in 24 oz mason jars as it can be folded and inserted through the neck of the jar.
Specifications:
Material: Food Grade Silicone
Fits our 1-gallon and 33 oz glass jars and 24 oz mason jars
Want clearer wort? Quicker chilling times? Higher hop utilization during flameout? Achieve all this and more by upgrading your system with the new Weldless Whirlpool Arm by Fermentap!
Designed to be installed underneath the handle of your kettle, this piece of equipment will allow you to achieve a perfect whirlpool in your Boil Kettle. Simply pump your wort from your ball valve, into this piece, which will jet around the inside of the kettle, forming a strong whirlpool. It will settle Trub in the center of your kettle, making it easy to pull clear wort from your ball valve. It also gives a much higher chilling efficiency when using an immersion chiller, due to the increased turbulation of wort. On top of this, the increased flow will result in higher extraction of hop oils and flavor during flameout additions!
Made of 100% stainless steel
It features a 1/2" Full Port ball valve and a 1/2" barb.
The inner barbed elbow is 3/8".
Features a 1/2" MPT outlet for hooking up your ball valve directly, along with FPT on the inside for connecting any brewing accessory you might want!
NOTE: You will need to drill a 1" hole for installation of this weldless spigot. We recommend a Step Drill Bit for this.
Please note: this item is a kit of our Weldless Ball Valve and a MPT x Barb Elbow fitting. You will need to to thread the elbow into the bulkhead after installing it on your kettle.
This tubing is so much better than the standard tubing most brewers start with. Silicone Tubing is odorless, tasteless, and is NSF approved as food-grade at temperatures from -100F to 500F. The translucent color allows you to see your wort flowing. It withstands high heat, which is great for any time that the wort in contact with tubing will be above 180F, which is the temperature threshold for most vinyl tubing. It doesn’t slip off of your equipment, never kinks, and easily slides on and off of barbed fittings without deforming or leaking. It is so easy to work with that once you’ve tried it on one piece of your equipment, you’ll want to upgrade your whole setup!
3/8" ID
5/8" OD
Platinum Cured
Not designed to hold pressures above 20 psi. Will burst at 30 psi at 70F.
Track your fermentation progress without ever disturbing your wort! The Tilt Hydrometer and Thermometer is added directly to your fermenter to provide real-time data on the current gravity and temperature of your wort, eliminating the hassle and potential contamination that comes from opening your fermenter to pull samples. The Tilt is especially useful for brewers fermenting in glass carboys or plastic fermenters that don't have spigots for sample taking. Designed for homebrewing, the Tilt hydrometer lets you instantly read your brew's specific gravity and temperature on your compatible Apple iPhone/iPad or Android smartphone/tablet or Tilt Pi. Most Bluetooth 4.0+ devices will work with the Tilt. You can then optionally log data to the cloud using their free Google Sheets template or other 3rd party cloud platforms. Tilt's goal is to help homebrewers brew better beer. The Tilt hydrometer allows you to check the specific gravity and temperature of your beer while it's fermenting, without ever having to open your fermenter or pour out any of your precious brew. This makes brewing more consistent and easier to track. Here are some of the new features of the Tilt: Range: Better reception and range. With the increased transmission power your Tilt will send data through larger, thicker-walled fermenters. Precision: Upgraded sensors. With an improved temperature sensor and accelerometer your Tilt will operate with more precision. Efficiency: Reduced power consumption so more brews, less battery changing. New Look: Newly designed custom circuit board and harness. If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color. Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop it in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi. The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1°F (+/- 0.5°C). Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.
Everything that comes with our Deluxe kit plus some major upgrades Large 8.5-gallon brew kettle with ball valve port for easy transferring of liquids Copper wort chiller offers a quick & convenient way to chill wort — no ice bath required! Step-by-Step instruction pamphlet fine-tuned over 20 years for easy success Your choice of recipe kit included The Premium Homebrewing Starter Kit is our "get the best to start with" kit and comes with all the bells and whistles! Included in this beer brewing starter kit is a massive 8.5 gallon stainless steel brewing kettle, 7 gallon Fermonster fermenter, copper wort chiller, choice of ingredient kit, and all the time tested brewing equipment you need to make beer at home. Long story short, this kit has everything you need to start home brewing! We started with our Deluxe Homebrew Starter Kit (BRKIT20) and upgraded the brew kettle to an 8.5 gallon model. The larger volume kettle allows for Full-Boil brews which can have lighter color and better hop flavors. The included kettle spigot makes transferring liquid from your kettle to your Fermonster Fermenter safe and easy. Our kettle also includes a thermometer port with plug so that you can add a dedicated kettle thermometer at any time. You will also enjoy the new silicone handle grips and internally stamped volume markers. Then in order to quickly cool the beer after boiling we included our WC20 copper Wort Chiller (a $60 value!). To top it off, we upgraded the Fermonster by a gallon to a massive 7 gallon capacity. This can be key down the road when you want to brew certain styles of beer that foam a lot during fermentation. With smaller fermenters it can bubble right out of the top. Stay out of trouble by never making a mess! A larger kettle, wort chiller and bigger fermenter are some of the first upgrades new brewers make—save yourself the hassle and purchase these items at an amazing value as part of the Premium Homebrew Starter Kit, from Morebeer!™ The Fermonster Fermenter - A Huge Upgrade Over Standard Buckets or Glass "Carboy" Water Bottles Unlike buckets or glass carboys, the Fermonster fermenter was designed for brewing beer. It is made from tough, clear, virgin grade PET plastic so you can see the magic of fermentation. Unlike glass it will never break and shatter if dropped. It represents a huge upgrade over traditional buckets because these fermenters are much less likely to get scratched. Scratches can hold bacteria that can cause off flavors in the beer. The Fermonster comes with a built-in spigot that eliminates a long time issue in homebrewing of having to start a siphon to transfer your beer to the bottling bucket after fermentation is over. The large 4" lid allows for easily adding yeast, hops, or other additions. We also really love the molded-in level markers that tell you exactly when you have reached your desired volume. We Don't Skimp on Cleaning and Sanitizing Proper cleaning and sanitizing is one of the core tenants of making great beer. Some starter kits utilize an all-in-one cleaner/sanitizer that does neither job well. We’ve included the best-selling sanitizer for brewing, Star San. We also include Craftmeister oxygen-based cleaning tablets that make cleaning your Fermonster Fermenter a breeze. Other Upgrades That Make Brewing Easier We’ve also made a few items standard that really make the brew day easier including a thermometer for temperature monitoring and a hydrometer with testing jar for measuring sugar levels. Our reusable mesh bags allow for the easy removal of spent grain and hops at the end of the boil. The included stainless spoon is a really nice upgrade over plastic when you are stirring boiling liquids. Easy to follow, How-To Instructions with Videos & a FREE 800 Number with Actual Brewers to ask questions! We've taught hundreds of thousands of people how to brew in over 25 years. Our instructions are clear and simple to follow and will have you making great beer with batch number one. If you have any questions, call our on-staff brewmasters at 1-800-600-0033. In an age where 800-numbers and real customer service is going away, you can still call us and ask a question. Flip through our Interactive Brewing Instructions below and click on any play button to see a video of that step!
Recipe Options: American Ale produces a light colored, hoppy Pale Ale that puts the beloved Cascade hop on full display. Cascade hops are one of the classic American hop varieties, and we love them for their citrus, grapefruit character. Pliny the Elder is a truly amazing beer with a cult like following. This beer is an intense Double IPA that is highly bitter with an intense hop flavor and aroma thanks to its 9 separate hop additions. Haze Craze is our most popular New England IPA recipe kit. This Hazy IPA is packed with all of the hop character you'd expect from a super juicy NEIPA, and is sure to please even the most discerning hop head. Wheat and oats lend a delightful mouthfeel and silky texture. Anchorage Amber is modeled after the very popular Alaskan Amber® Ale. For those who appreciate rich malt character much more than hop flavor, this beer is a must. This Kit Includes: 7 Gallon Fermonster fermenter with built in spigot, stopper, and airlock 8.5 Gallon Stainless Steel Brew Kettle w/ thermometer port, stainless ball valve, internal volume markers, Silicone handle grips Copper Wort Chiller for quick cooling Food Grade Bucket for bottling Mesh bags for grain and hops on brew day A Thermometer for easy temperature management Hydrometer for making key sugar measurements Transfer Tubing Bottling Wand with shut off valve Sturdy Bottle Capper Bottle Caps Bottle Cleaning Brush Star San Sanitizer for true sanitizing Large Stainless Steel Spoon for mixing Craftmeister Cleaning Tablets for super easy cleaning Your choice of recipe kit with yeast included
You will also need one of the following to bottle or keg your beer: (48) 12 oz or (24) 22 oz cappable Beer Bottles or a Home Kegging System
The perfect Tilt for homebrewers with stainless steel fermenters Track your fermentation progress without ever disturbing your wort! Say goodbye to pulling samples for your glass hydrometer 2 to 3x more powerful than the standard Tilt for improved signal transmission through stainless steel Slim design to easily recover the Tilt Pro Mini in small tanks with 1.5" tri-clamp dump ports When the first Tilt hydrometer was released in 2016, most of the home brew fermentation vessels on the market were either glass carboys or plastic brew buckets. Now we see more and more small-scale stainless steel. The problem is stainless isn't that great of a window when it comes to wireless data transmission. The Tilt Pro solves this problem, though it might be bigger than what you need. This is where the Tilt Pro Mini comes in with its smaller size and price and easy recovery in smaller tanks with 1.5” dump ports along with Tilt Pro features like long range (maximum allowed by FCC) and increase in sensor resolution, it takes homebrewing to a new level. The Tilt Pro Mini can be used with the same Tilt 2, Tilt Pi, and other Tilt apps and 3rd party hardware and software as the standard Tilt and Tilt Pro hydrometers. You can even use a standard Tilt and Tilt Pro Mini together if they are the same color in the Tilt 2 app, so run up to 16 different Tilts at once in the Tilt 2 app with 8 standards and 8 pro minis. Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download. Specifications: Size: 1.13" Diameter x 4.51" Tall Will pass through a 1.5" Tri-Clamp drain for easy recovery Weight: 2.3 oz Specific Gravity Measurement Range (pre-calibrated): 0.9900 - 1.1200 (possible to user calibrate up to 1.2000) Specific Gravity Resolution: 0.0001 Temperature Measurement Range: 0°F - 185°F Temperature Resolution: 0.1°F Battery: User-replaceable, single use CR123A Li-MnO2 lithium battery 3.2v (max) Not compatible with rechargeable battery
Wireless Range: 300 feet when floating in pint glass of water and 20 feet floating in 5-gallon stainless steel keg Approximately 2-3x standard Tilt and about 80% of Tilt Pro range
Wide mouth jar for small batch fermentations or storing pickled food items Large 3.9" diameter opening 100-2055 Lug Finish neck (lid not included) 128 oz (1 Gal) capacity Widemouth glass jars are great for fermenting small batches of fruit wines, beer, vinegars, lacto fermented foods, and more. The 100 mm (3.9") wide opening is large enough to add product, and to reach your hand in for cleaning. Lids are not included, see our 100 mm lug finish metal lids: FE309A. 1 gallon widemouth jars are sold individually, and come packed 4 to a case. We suggest buying a case quantity of 4 to reduce the chance of breakage in transit. Please note: the example image shows a unit with continuous threads. These jars have a lug finish.
No more boil overs, no more blow-off tubes. Once you’ve used Foam Control you’ll never brew without it again! Foam control does just what its name suggests--it reduces foam production during the hot-break portion of the boil, and it reduces the amount of krausen developed during fermentation. Also known as FermCap S, Foam Control does not affect the head on your finished beer. In fact, it can actually increase the head by retaining head-forming compounds that would have been blown off during fermentation. It will settle-out of your beer before bottling or kegging as it is actually absorbed onto the surface of the yeast cells and filter media. Add two drops per gallon at start of fermentation. Comes in an eye dropper bottle for easy use. 1 oz is good for about 50 x 5-gallon batches of beer. Also available in bulk 1 gallon size. Note: Keeps best when stored in the refrigerator. Like Foam Control (FermCap S)? Then you will love CellarScience® Foam Axe - Anti Foaming Agent!
Make a yeast starter in no time flat using premade, condensed wort—just mix with water and add yeast!
Skip the messy, time-consuming process of making a yeast starter with DME—no boiling or cooling required
Keep Propper Starter™ on hand for whenever brewing inspiration strikes—shelf stable for 2 years with no need to refrigerate
Propper Starter™ is condensed wort in a can, allowing you to make a yeast starter in minutes! No need to make a mess in the kitchen measuring out DME, and no need to waste time boiling and cooling before you pitch your yeast. Simply open a can of Propper Starter™, pour it into your flask along with 16 oz of bottled or distilled water, then add your yeast. It's that simple!
One can of Propper Starter™ with 16 oz of water will make a 1L starter with a gravity of 1.040. It is recommended to use the 1:1 dilution rate, regardless of the original gravity of your wort.
Making a proper yeast starter will offer higher cell counts at the time the yeast is pitched, leading to faster, healthier fermentations and better tasting beer! They're especially recommended for lagers and any beer that has an original gravity of 1.060 or higher.
Instructions:
Sanitize flask, stir bar, top of can and yeast pack
Swirl and open can, then pour contents into flask
Add 16 oz of bottled or distilled water to flask
Pitch yeast and swirl flask to mix
Add stir bar to flask, cover with foil, and mix on stir plate*
Recommended Use:
For high gravity beers (1.060 OG or higher)
For cold pitching lagers
For yeast packs that recommend a starter
For yeast packs nearing expiration
Ingredients: water, barley malt extract, yeast nutrient
Shelf life of 24 months. Refrigeration not required.
*Note: the use of a stir plate is not required for making a yeast starter, but is highly recommended, as it will further increase cell count through continuous aeration. For recommended stir plates and Erlenmeyer flasks, see below under "You Might Also Need".
High-quality stainless steel fermentation and storage tank
Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress
Impeccable 2R (IIId) surface finish for easy cleaning
A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid
Made in Germany by Speidel
This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids. These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary. These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life.
Features:
304 SS construction
IIId surface finish - easy cleanup
120 l (31.7 gal) volume
Gasketed sealed tanks - no oxygen permeation during storage
88 cm (34.7") Height x 44 cm (17.3") Ø
German quality construction with 25 year warranty
Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting
The Blichmann Engineering™ Spunding Valve is purpose-built for pressure fermentation. With exacting precision, you’ll turn out lager-like beer at ale temperatures in no time! Pressurized fermentation is a great option for creating lager-like flavor profiles at room temperature, without the hassle of temperature control. And you’ll complete your fermentations faster and easier. The Blichmann Engineering™ Spunding Valve is purpose built for homebrewers to control your pressures with exacting precision. Research by Blichmann Engineering™ and White Labs shows significant reduction of esters (fruity flavors found in most ales) and low levels of diacetyl, by fermenting under pressure. Key Features:
Ferment under pressure to produce clean, low ester, lager-like beers Extremely fine adjustments from 0 to 35 psi, and superb pressure stability Suitable for vessels up to 42 gal (1BBL batch size) Perfect for naturally carbonating your beers Use for counter-pressure transfers Offered in ½” NPT and Tri-clamp models for the ultimate in adaptability Integral blow-off barb fitting adds a visual indication of fermentation if desired Tri-Clamp model is ideal for most pressure fermentors with T.C. fittings Also available in NPT model (BL151)
Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment.
A clean, neutral, low-calorie seltzer base designed to finish quickly with minimal fermentation character
Includes True Citrus True Grapefruit flavoring, made from real citrus juices and oils that are dried and crystallized for easy use and consistent results
Estimated ABV: 5%
Makes 2 gallons of finished seltzer
Hard Seltzer Flash Brewing® Kit
Flash Seltzer is a simplified system for producing clean, low-calorie hard seltzer with a strong focus on clean fermentation and minimal off-flavors. Sugar-based fermentations lack the natural nutrients found in beer and wine. This kit pairs Flash Yeast with CellarScience Dynamo 800, a nutrient formulated specifically for seltzer fermentation.
Dynamo 800 supplies the nitrogen yeast need to ferment efficiently in sugar-only environments, supporting a clean-fermenting process that helps minimize the risk of sulfur, fusel alcohols, and other off-flavors. Fermentation can finish in as few as 5 days.
Flash Brewing® Kits
Introducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home.
Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you.
If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions.
Equipment Required for Flash Brewing®
Flash Brews can be fermented in any wide mouth 3-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 3-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, see below.
Includes:
Dextrose (Corn Sugar): 2 lbs
CellarScience® Dynamo 800 Seltzer Nutrient
Flash Yeast™
True Citrus® True Grapefruit®
Flash Seltzer Instructions
Good for ethanol and SO2 tolerance. Begins fermentation quickly and is reliable at cooler fermentation temperatures. Neutral flavor profile. Recommended for dry white and red wines but actually not the first choice for champagne (DYW10 is.) Alcohol tolerance to 17% and a fermentation range of 60 to 80 degrees.
The Blichmann Engineering™ Spunding Valve is purpose-built for pressure fermentation. With exacting precision, you’ll turn out lager-like beer at ale temperatures in no time! Pressurized fermentation is a great option for creating lager-like flavor profiles at room temperature, without the hassle of temperature control. And you’ll complete your fermentations faster and easier. The Blichmann Engineering™ Spunding Valve is purpose built for homebrewers to control your pressures with exacting precision. Research by Blichmann Engineering™ and White Labs shows significant reduction of esters (fruity flavors found in most ales) and low levels of diacetyl, by fermenting under pressure. Key Features:
Ferment under pressure to produce clean, low ester, lager-like beers Extremely fine adjustments from 0 to 35 psi, and superb pressure stability Suitable for vessels up to 42 gal (1BBL batch size) Perfect for naturally carbonating your beers Use for counter-pressure transfers Integral blow-off barb fitting adds a visual indication of fermentation if desired NPT model is perfect for the Blichmann Engineering™ Cornical™ Unitank (BL275) Also available in T.C. model (BL152)
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late December.
Our most affordable brewing kit! Includes the most necessary items you'll need to make your first beer A great starter kit choice if you already have a 2.5-3 gallon pot at home Measuring & testing equipment included to track fermentation temperature and alcohol production Includes cleaning equipment and sanitizer so you'll be ready for your first brew and the next!
Step-by-Step instruction pamphlet fine-tuned over 20 years for easy success Our Homebrewing Starter Kit gets you started in homebrewing at a very affordable price. It is also the simplest system to use. Anyone can follow the step-by-step directions and produce truly great beer with the first batch! This upgradeable system is designed around two, food-grade plastic buckets which feature our handy Sediment Block Spigots for quick and easy liquid transfers. After performing the Brew Day boil process, the first bucket is used to ferment the beer for two weeks. It's then transfered into the second bucket at bottling time, and out of that bucket into your bottles. This Kit Includes: Food Grade Plastic Six Gallon Ferrmenter with spigot, stopper and airlock Food Grade Bottling Bucket with spigot Mesh bags for steeping grain and hops on Brew Day Thermometer for easy termperature managment Hydrometer for making key sugar measurements Transfer Tubing Bottling Wand with shut off valve Sturdy Bottle Capper 50 Bottle Caps Bottle Cleaning Brush Star San Sanitizer for true sanitizing You Will Also Need: A Brewing Kettle A Beer Ingredient Kit for each batch you brew (48) 12 oz or (24) 22 oz cappable Beer Bottles or a Home Kegging System to package your beer
Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications
Floating lid can be positioned as needed to match the volume of the liquid you're working with
Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid
Air pump with pressure gauge, dry airlock, and spigot are included
Features cooling jacket, thermometer & thermowell, and 1.5" tri-clamp port with butterfly valve
Made in Italy by Marchisio
Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.
Considerations for Winemaking
When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks. This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy. All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage.
Marchisio
We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration. Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside. Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation.
Includes:
304 Stainless Tank w/ Cooling Jacket
304 Stainless Floating Lid
Food-Grade Floating Gasket
Air Pump with pressure gauge
Connection kit for connecting gasket to pump
Dial Thermometer & Thermowell
1.5" Tri-Clamp port w/ butterfly valve
Dry Airlock for tank
200L Specifications:
Nominal volume: 200 Liters (52.8 gallons)
Effective volume: 197 Liters (52 gallons)
Diameter: 65 cm (25.5 inches)
Height: 65 cm (25.5 inches)
Port size: 1.5" T.C.
*Please Note: Tank may differ slightly from image shown. Stands are sold separately.
Granulated corn syrup solids with dextrose mostly converted to maltose. Mimics barley malt extract in fermentation profile. 56% Maltose, 16% maltotriose, 8% dextrose, and 20% higher saccharides. Can be used to increase alcohol content while maintaining mouthfeel and body.
The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer The Plus models feature a built-in cooling jacket for maximum cooling power when paired with a glycol chiller Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. The Plus-model also has a cooling jacket with 3/8" NPT threaded ports and two 1.5" T.C. ports in the front. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation. Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories. Key Features: PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation Easy cleaning with a 4" T.C. top port and 2" T.C. bottom port Pressure rated for 2 bar / 30 PSI. Wall bracket included Cooling jacket with 3/8" NPT ports Two 1.5" T.C. ports If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit. MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Packaging size: 13.3" (w) x 13.7" (d) x 42.9" (h) Net weight: 45.6 lbs Gross weight: 48.9 lbs Tank diameter (inside): Ø11" Max volume: 13.2 gal Cone volume: 0.4 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2 bar / 30 PSI In the Box: MiniUni™ Tank Base with silicone gasket Wall bracket and wall support Wall bracket safety pin Composite T.C. adapter 4" to 34mm Airlock, 3-piece with holder 4" tri-clamp 2" tri-clamp 1.5" tri-clamp (2) 2" T.C. blind cap 1.5" T.C. blind cap (2) T.C. gaskets For User Manuals and support, please follow this link to Brewtools Docs.
Get your fermentation started faster and finished cleaner by oxygenating!
Just screw this high quality brass regulator to the top of a disposable oxygen bottle, and use it with one of our diffusion stones to aerate your wort.
Features:
1/4" Barb Outlet
Max Delivery Pressure: 100 PSI
Max Flow Rate: 180 CFH
Regulator is Left Hand Thread
Stainless Steel Actuating Rod
Machined brass body with adjusting cap, piston and hose connection
Smart brewers know that a yeast starter is the best way to ensure proper cell count and yeast viability prior to pitching. If you want a reliable starter for your batch of beer, you need to feed the yeast. Adding a yeast nutrient to the starter will give the yeast an added boost! Fermaid K is a yeast nutrient that works for starters and main fermentation. Here’s how it works: Fermaid K is a complex formula that provides DAP, free amino acids, yeast hulls, unsaturated fatty acids, sterols; and micronutrients such as magnesium sulfate, thiamin, folic acid, biotin, calcium pantothenate, and other vitamins and minerals. Yeast use Nitrogen for protein synthesis and to maintain cellular growth. Nitrogen from the alpha amino acids contained in Fermaid K is utilized much more efficiently than from the ammonia salts like DAP. The unsaturated fatty acids and sterols available in Fermaid K are important survival factors needed to maintain alcohol resistance. They also help keep volatile acidity levels low. The cell wall fractions, available through the included yeast hulls, absorb medium chain fatty acids that are toxic to the yeast. They also provide nucleation sites to help keep the yeast in suspension. You do not need to add any additional fertilizers or DAP when adding Fermaid K. Use approximately 1 gram per gallon. Rehydrate in distilled water. A rough approximate of weight is 1 tsp = 4.7 grams. We highly recommend using a scale to weigh the product for an accurate dose. For a similar product check out CellarScience® FermFed Yeast Nutrient!
The best brewers make large yeast starters to get their beer fermenting fast. Large populations of active yeast help ensure flavorful beer free of off flavors. Our large 3000ml Erlenmyer Flask is a great vessel to make a large yeast starter for 5 gallon lagers and high gravity brews. Because it is made from borosilicate glass you can move it from a boil on your gas stove into a cold water bath for cooling, without the risk of cracking. (We do not recommend the use of an electric element. If this cannot be avoided, we recommend using a larger pot as a hot water bath on the stove.) This means you can do the whole process in one container, keeping it simple and helping to reduce the risk of contamination when transferring from one container to another. Recommended Process for Use of Flask: Double Boiler Method It is important for your safety to heat water in the flask with a heat source that distributes heat evenly. Our manufacturer has confirmed that direct heat to the glass can break down its integrity and break if the heat source doesn't distribute evenly. Morebeer! recommends using the "double boiler method." This process involves using a boiling water bath on the outside of the flask to heat up the water inside the flask. All you need is a kettle 3 gallons or larger. This process is much safer and efficient. If the flask should break or boil over, your kettle will be there to collect the contents, thus keeping your stove clean and keeping you away from potential harm. Features Massive 3L (3000mL) Capacity Made from Borosilicate Glass Fantastic price for a flask of this size Produced for MoreBeer! " base " top "H Why make a yeast starter? (from our FAQ) We build starters for 3 main reasons. First, to ensure yeast health. By making a starter 1-3 days in advance, you ensure that your yeast is healthy and strong and ready to do its job. Second, to create more yeast. By making the starter you will increase the cell count of the yeast, giving you a better chance of keeping bacteria's and wild yeasts from fermenting your wort. Third, if you are making high gravity beers. If you are making a high gravity beer (1.060+) you will need more yeast to start the ferment faster. High gravity beers will also finish more completely when you pitch ample quantities of yeast. In the lab world, these flasks are known as "Student Grade". A great flask for making yeast starters!(Student grade is not the highest grade flasks and will have minor defects) Kegland Part Number: KL03995
Replaces the oversized airlock that comes with our Speidel plastic tanks.
Does Not include the stopper shown in the photo.
Height 5 3/8". Outer diameter 2 7/8". Stem outer diameter 23/32". Stem inner diameter 9/16".
MONK is a classic Belgian ale strain renowned for producing clean, yet complex, beers
Perfect for Belgian-style Blondes and Pales or Abbey-style Dubbels, Trippels, and Quads
Designed to be sprinkled directly onto the surface of your wort with no pre-oxygenation before pitching required
Ferment between 62-77°F
CellarScience offers high-quality yeast that is easy to use, consistent, and available at a tremendous value
A classic Belgian ale strain renowned for producing clean, yet complex, beers. Perfect for Belgian-style Blondes and Pales or Abbey-style Dubbels, Trippels, and Quads. A clean strain that will still impart some delicate dried fruit notes and restrained phenolics. Like all CellarScience yeast, MONK is eligible for direct pitch straight into your wort. CellarScience provides 15g of yeast per sachet, which is up to 36% more than any other brand of dry yeast. Every batch of yeast is PCR tested to ensure quality.
Dosage:
One sachet is enough to treat a 5–6 gallon batch. When calculating for larger batches, use at a rate of 2–3 grams per gallon of wort. We recommend rounding up by one full sachet rather than measuring out the yeast exactly.
For professional brewers, use at a rate of 80-120 grams per barrel, depending on wort temperature and gravity.
Direct Pitch or Rehydrate:
MONK yeast is designed to be sprinkled directly onto the surface of your wort with no oxygenation required in the initial fermentation. Our aerobic growth process makes this possible by creating dry yeast with high viability and high sterol levels. MONK yeast is pre-loaded with essential nutrients to ensure a successful, complete fermentation. While not required, some brewers prefer to rehydrate yeast. To hydrate yeast, first, sanitize the yeast brick and scissors. Use 10 grams of sterilized tap water between 85-95°F (29-35°C) mixed with 0.25 grams of FermStart per gram of yeast. Sprinkle yeast on the water. Allow the slurry to stand undisturbed for 20 minutes, then swirl. Use small amounts of wort to adjust to within 10°F (6°C) of wort temperature before pitching. Ferment between 62-77°F (16-25°C).
Optimum Fermentation Temp: 62-77°F
Flocculation: Medium
Alcohol Tolerance: 12% ABV (WY1762 12%)
Attenuation: 75-85%
Similar Strains: WY1762, WLP540
Gluten-free
CellarScience Yeast:
For years liquid yeast has been sold as the higher quality option but times are changing. Yes, 20 years ago dry yeast was made by bread yeast producers and the quality was not as good as liquid yeast. CellarScience is helping to flip that script with a full lineup of high-quality dry yeasts. Cell count and viability is usually higher than commercial liquid yeast pitches, which vary from pouch to pouch and don't ship well. CellarScience yeast can be pitched directly in most batches of wort, offering significant time savings. Yeast that is quick and easy to use, high quality, and available at a reasonable cost adds up to a tremendous value. Quality yeast that doesn't "break the brink".
CellarScience Nutrients:
For high gravity ferments consider rehydrating yeast with CellarScience FermStart yeast hydration nutrient. For high gravity or low nutrient wort, feed your fermentation with CellarScience FermFed DAP Free complex yeast nutrient mix.
LP 652 is a highly reliable bacteria to create balanced sour beers
Selected for its capabilities to provide tropical, citrus and fruity notes when used in kettle souring
Ideal for kettle sour recipes
Fermentis active dry yeast offers reliability, ease-of-use, and consistency to home and professional beverage makers across the world
The preferred Fermentis dry strain for producing kettle sour beers with tropical, citrus, and fruity notes. SafSour LP 652™ is a homofermentative lactic acid bacteria specifically selected by Fermentis for its incredible performance in kettle souring and ability to give the beer a beautiful freshness. Recommended for golden sour ales or fruited kettle sours.
Dosage:
An optimum dosing rate of 10 g/hL provides a lactic fermentation within 24h – 36h.
Usage:
It is recommended to pitch directly into the non-hopped wort at the temperature of 37°C.
Storage:
Storage must be done in cool temperatures (< 4°C/39.2°F) and in dry conditions.
Shelf Life:
18 Months from production date (see printed information on the sachet).
Everything you need to start enjoying your delicious beer on draft!
No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles
Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator
Featuring the hottest homebrew keg around—the all-stainless, stackable Slimline Torpedo Keg
EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings
The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap!
From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 1.5, 2.5, or 5 gallon Slimline Torpedo Keg. These are the hottest homebrew kegs on the market, featuring stackable base, rolled stainless handles, and labeled In and Out body connects for your QDs. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup.
Included:
KOMOS Dual Gauge Regulator
KOMOS 5 lb aluminum CO2 cylinder
Slimline Ball Lock Torpedo Keg (1.5, 2.5, or 5 gal)
EVABarrier beer & gas lines
Duotight Ball Lock Quick Disconnects (QDs)
Duotight-compatible plastic picnic faucet
KOMOS 7-in-1 Multi Tool Wrench
Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.
The Megamouth Torpedo Keg series features an extra-large lid opening for easy cleaning
Brand new, all-stainless construction ball lock keg
Stackable with ball lock quick disconnects in place
Etched In and Out labels near the keg posts for easy identification
Rolled handles for a comfortable grip
Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams
The Megamouth Torpedo Kegs are by far the easiest to clean and maintain out of any ball lock homebrew keg you'll find. With an extra-large lid opening, even the buffest of homebrewer (we hear they do exist!) will have no trouble reaching in for a good scrub when it kicks—no expensive keg washing contraptions needed! The Megamouth makes for an excellent pressurizable fermentation vessel and is the ideal choice for brewers who prefer to add dry hops and other flavoring ingredients directly to the keg.
Quality First
Here at MoreBeer! we love nothing more than quality interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. Torpedo kegs are machine welded and exceed our standards for quality. This weld quality is possible because these kegs are made by an ISO certified commercial keg manufacturer.
Cool Features
Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. “In” and “Out” is etched near the keg posts for easy identification which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake.
Overall for the price and quality, along with free shipping from MoreBeer!, the Torpedo Keg is an amazing value!
Specifications:
Mouth Opening: 5.8" L x 4.8" W.
Max Pressure: 130 psi
PRV Rating: 85 psi
High Quality Laser Welded Seams
ISO9001 Quality Assurance
Made from 304 Stainless Steel
Dimensions:
Height (in.)
Diameter (in.)
3 Gal
13.4
11.4
5 Gal
17.9
11.4
6 Gal
20.5
11.4
10 Gal
30.3
11.4
Flash Brewing® Kits from MoreBeer!® require only 10 minutes to brew. Just mix and ferment.
A clean, neutral, low-calorie seltzer base designed to finish quickly with minimal fermentation character
Classic creates a neutral, unflavored seltzer for you to customize how you see fit
Estimated ABV: 5%
Makes 5 gallons of finished seltzer
Hard Seltzer Flash Brewing® Kit
Flash Seltzer is a simplified system for producing clean, low-calorie hard seltzer with a strong focus on clean fermentation and minimal off-flavors. Sugar-based fermentations lack the natural nutrients found in beer and wine. This kit pairs Flash Yeast with CellarScience Dynamo 800, a nutrient formulated specifically for seltzer fermentation.
Dynamo 800 supplies the nitrogen yeast need to ferment efficiently in sugar-only environments, supporting a clean-fermenting process that helps minimize the risk of sulfur, fusel alcohols, and other off-flavors. Fermentation can finish in as few as 5 days.
Flash Brewing® Kits
Introducing MoreBeer!'s Flash Brewing® Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home.
Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing® eliminates the need to boil. Our Flash Brewing® malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you.
If you want to read more about the development of Flash Brewing® at MoreBeer! or have more questions please read our Frequently Asked Questions.
Equipment Required for Flash Brewing®
Flash Brews can be fermented in any wide mouth 6 or 7-gallon fermenter you already own. We suggest a wide mouth fermenter so you can easily pour in the ingredients. The 7-gallon Fermonster fermenter is a perfect choice. If you are new to brewing and need a fermentation kit, see below.
Includes:
Dextrose (Corn Sugar): 5 lbs
CellarScience® Dynamo 800 Seltzer Nutrient
Flash Yeast™
Flash Seltzer Instructions
Standard, plunger-style sample valves can be a bit of hassle when it's time to check your gravity or do a taste test. Replace it with this simple T.C. x Draft Shank adapter which allows you to pour samples with your preferred beer faucet. We recommend using the NukaTap Flow Control Faucet with Self-Closing Spring. This will allow you to put some restriction on the beer flow and come in very handy when taking samples from a pressurized conical or brite tank. Also compatible with Intertap, Perlick, and other faucets. Please note: standard NukaTap SS Faucet and Self-Closing Spring will not work with this shank. You can use a NukaTap SS faucet, but without the autoclose spring. Specifications: 2.75" total length Standard shank assembly 1.5" T.C. connection KegLand Part Number: KL19989
The Push-In Pressure Gauge is the ideal companion for the BlowTie spunding valve (FE960). It comes with an 8 mm (5/16 in.) barb, specifically designed to be compatible with 8 mm Duotight fittings. By pairing this pressure gauge with the BlowTie, you'll be able to easily set your blow off pressure when using the BlowTie for pressure fermentations or pressure transfers. The dial face is triple-scaled to read in psi, bar, and kPa. 8 mm (5/16") push-in barb Rubber coated to protect gauge 0-40 psi / 0-2.5 bar / 0-250 kPa Kegland Part number: KL07696
Reduce saccharification time, break down starches in unmalted cereals, and increase attenuation with one simple product! Ultra-Ferm from White Labs is a highly concentrated liquid amyloglucosidase derived from a select strain of Aspergillus niger. Rather than acheiving 75 to 80% hydrolisis of present starches, as you would with traditional brewing methods, Ultra Ferm allows total hydrolisis of dextrins to fermentable glucose, from all types of starch. UltraFerm WLN410 makes for the perfect additive when brewing a Brut IPA or Champagne Beer by eliminating residual sugar, allowing you to acheive the dry flavor profile that is signature to the style. It can also be used for the production of low calorie and extra high-alcohol beers, as well as light or diatetic beers. Add at the beginning of the mash-in. Ultra-Ferm optimal pH is between 3.5 and 5.5. Temperature should not exceed 140°F. Amyloglucosidase activity is completely destroyed when the wort is held at 185°F for 10 minutes. We've experimented with adding this enzyme at different stages throughout the brewing process, and found that it isn't limited to the mash stage alone. When pitching Ultra Ferm alongside our yeast, we were able to achieve a final gravity of 1.000, with no negative effect on the finished beer. Great news for the extract brewers out there that want to produce an extra dry beer! Store at 39-46°F. Stable for 12 months. Like White Labs Ultra Firm? Then you will love CellarScience® Brutzyme - Glucoamylase Enzyme!
A German Lager/Ale hybrid style. Blonde in color with low hop bitterness and smooth flavor
Includes Perle and Saaz hops
Estimated ABV: 4.3%
Estimated IBUs: 24
Makes 5 gallons of finished beer
A German Lager/Ale hybrid style that is traditionally made in Köln, Germany. Ideally, this beer is fermented between 58 - 64F, followed by cold aging for several weeks. It is a very tasty summer brew! Blonde in color, with low hop bitterness, a smooth flavor; grab a few bottles and head for the pool! This kit includes 4 pounds of our Pilsner liquid malt extract for authentic pils type flavor and 2 pounds of golden DME to give a more complex malt flavor to this light beer style. Also comes with 4 ounces of Maltodextrin powder to boost mouthfeel.
Makes 5 gallons
Estimated Original Gravity:1.042-46
SRM (Color Range): 5
IBUs: 24
Estimated Alcohol Percentage: 4.3%
Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.
Liquid Malt Extract (LME) vs. Dried Malt Extract (DME)
MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
Yeast starters offer higher cell counts at the time the yeast is pitched, leading to faster, healthier fermentations and better tasting beer!
You may be wondering how to make a yeast starter. Well, lucky for you this kit contains everything you need for making your own yeast starter right out of the box, including step-by-step instructions!
This is the most common size used to make yeast starters using liquid yeast, great for higher alcohol beer and cold fermented lagers.
In the lab world, these flasks are known as "Student Grade," meaning there may be some cosmetic flaws in the glass, and the volume measurements are approximate due to variations in the thickness of the glass walls of the flask. This makes it a great flask for making yeast starters--at a great price!
We do not recommend the use of an electric element with these flasks. If this cannot be avoided, we suggest using a larger pot as a hot water bath on the stove.
Selected and adapted especially for direct inoculation of rose and white wines Strong fermenter under harsh white wine conditions Direct inoculation, freeze-dried bacteria – does not require rehydration High numbers of active cells which ensure a quick start of fermentation Good for 66 gallons Viniflora CH35 is a freeze-dried culture of Oenococcus oeni. This malolactic bacteria has been selected and adapted especially for direct inoculation of rose and white wines. Viniflora CH35 has been selected for its outstanding performance in malolactic fermentation of difficult white wines. This strain is the perfect match for rose and white wines but can also be used with success in red wines. Application: Viniflora CH35 should be added to dry wine, right after the alcoholic fermentation. No rehydration or reactivation is required. For more information about ML Bacteria, please see MoreWine!'s Guide to Malolactic Fermentation. Characteristics: Outstanding tolerance to low pH and elevated levels of SO2 (down to pH 3.0 and up to 50ppm!) Strong fermenter under harsh white wine conditions Clean and fruity flavor profile No production of biogenic amines High inoculation level encourages a completed malolactic fermentation 14% alcohol tolerance Key Features: Recommended for white wines Direct inoculation, freeze-dried bacteria – does not require rehydration High numbers of active cells which ensure a quick start of fermentation This strain is pH tolerant to 3.0, Total SO2 to 45 ppm (white wines), temperature 59 – 77 ͦF and alcohol to 14% (v/v) Low level of volatile acidity Cinnamoyl Esterase Negative