Search results for "ss+brewtech spunding"

The Sspunding Valve from Ss Brewtech allows you dial in the precise pressure at which you want your Unitank fermenting. A spunding valve is essentially an adjustable pressure relief valve. Normal PRVs that are found on kegs, couplers and come stock on Ss Unitanks, operate as safety features that will release pressure when it's nearing dangerous levels. Spunding valves, on the other hand, allow you to set the release pressure much lower. Simply dial in your desired fermentation pressure, and the Sspunding valve will release excess pressure when it gets too high. The compact, non-scaled Sspunding valve will take a little extra time to set, but can be done easily enough using the gauge included on the Ss Unitank. Check out FE892Bfor the scaled version. The polycarbonate cup is designed to hold sanitizer so that the tank remains 100% sanitary throughout the course of the fermentation process. You can pair the spunding valve with a 1.5" tri-clamp tee (H666) and 90-degree elbow (H667), which enables the unit to be installed on the Unitank’s blow off arm, as shown in the photo. (Scaled version shown in example photo - FE892B). All 304 Stainless Construction Only for use with pressure rated Unitanks 1.5" TC interface Removable sanitizer cup Easy disassembly for cleaning Not for use on low pressure vessels (Chronicals, etc.) For Your Safety: Always leave the fixed-pressure PRV included with the Unitank in place. Never exceed the maximum rated working pressure of the vessel at any time during operation.

Read more less

The Sspunding Valve from Ss Brewtech allows you dial in the precise pressure at which you want your Unitank fermenting. A spunding valve is essentially an adjustable pressure relief valve. Normal PRVs that are found on kegs, couplers and come stock on Ss Unitanks, operate as safety features that will release pressure when it's nearing dangerous levels. Spunding valves, on the other hand, allow you to set the release pressure much lower. Simply dial in your desired fermentation pressure, and the Sspunding valve will release excess pressure when it gets too high. The scaled Sspunding valve includes an etched sleeve with a scale between 0-2 BAR, along with a pressure calibrated spring. This version is perfect for a home or nano brewer that wants to be able to dial in pressures on the fly without having to match the release pressure using a gauge. The scaled version also features a pressure release knob to quickly and easily verify or equalize tank pressure. If you're looking for a more affordable option, check out FE892Afor the non-scaled version. The polycarbonate cup is designed to hold sanitizer so that the tank remains 100% sanitary throughout the course of the fermentation process. You can pair the spunding valve with a 1.5" tri-clamp tee (H666) and 90-degree elbow (H667), which enables the unit to be installed on the Unitank’s blow off arm, as shown in the photo. All 304 Stainless Construction Only for use with pressure rated Unitanks 1.5" TC interface Removable sanitizer cup Easy disassembly for cleaning Not for use on low pressure vessels (Chronicals, etc.) For Your Safety: Always leave the fixed-pressure PRV included with the Unitank in place. Never exceed the maximum rated working pressure of the vessel at any time during operation.

Read more less

The Ss Grain Mill sports an all-in-one design, featuring a hi-torque DC motor combined with a leveraged gear reduction system that drives a series of billet aluminum pulleys and high inertia rollers that make easy work of the toughest wheat and rye malts — Capable of up to 350 lb/h  Differential Speed Rollers Dating back to the early days of craft brewing, feed mills were often repurposed in breweries due to the lack of availability of milling equipment designed specifically for processing malt in brewing applications.  Conversely, in a home brew settling, corona mills, and other repurposed mill designs intentioned for processing raw grain in a home kitchen were adopted for their ease and accessibility.   Naturally, if you're feeding livestock or making grits, you typically want to pulverize the grain.  However, if you're brewing beer it’s preferable to crack the endosperm in several places and then sheer off the husk, keeping it mostly intact.  This shearing and crushing action maximizes both efficiency and lautering performance, reducing or eliminating the need for rice hulls or other lautering aids. The two rollers inside the Ss Grain Mill are both driven by the onboard motor, but designed to rotate at different speeds. This key feature is at the heart of our purpose built mill designed for home and pro brewing.   Machined Fluted Stainless Steel Rollers Other mills that are designed to pulverize grain, often rely on hardened steel knurled rollers to extend their usable life.  The shearing action of the Ss Grain Mill places less stress on the roller to effectively process the grain. We settled on the more professional approach of fluting the rollers, which enhances the ability for the two rollers to engage the malt and effectively shear the husk from the endosperm.  It was also important to us that this mill be functional in either a home or pro-environment, so we decided to cast the rollers in solid 304 stainless steel, with each roller weighing a robust 7.5 lbs.   Furthermore, the profile of the rollers has been completely rethought.  Most small mills rely on a wide processing envelope and a small, 1.5-2” diameter roller.  We have emulated the design of large production mills, and increased the diameter of the roller to 4”, and narrowed the processing envelope.  This design increases the rotating mass, and stores rotational energy, which ultimately helps to smooth abrupt changes in rotational speed.  Furthermore, the entrance angle is less aggressive with a larger roller, resulting in additional mechanical advantage.   Precision Gap Adjustment Eleven points of adjustment ranging from 0.5mm to 2.0mm open up a wide range of malt products. Gap adjustments are tool-less and can be made without any disassembly, or complicated procedures.   Extruded Aluminum Chassis The two piece extruded 6061 aluminum chassis promotes structural rigidity resulting in a more precise degree of roller alignment.  This is important to retaining consistent roller gap settings from batch-to-batch. Furthermore, the two-piece construction isolates the motor and rollers in separate chambers, preventing the motor and drivetrain from accumulating dust and debris. All rotational pulleys, and rollers have their own dedicated fully sealed ball bearings for low drag and long life.   25 lb. Hopper Capacity  The Ss Mill will include a custom tooled 4mm thick ABS hopper that is both structurally strong and lightweight. Designed to hold up to 25 lbs. of grain at a time, the Ss Grain Mill has been clocked in prototype testing at processing roughly 350 lbs. per hour of barley malt.  Which is roughly a 50 lb. sack every 8 mins, making it perfect for batch sizes from 5 gallons to 5 BBLs.   Features: All-In-One Design Differential Speed Rollers Machined Fluted Stainless Steel Rollers Precision Gap Adjustment Extruded Aluminum Chassis Specs: 350 lb/h 25 lb Hopper 0.5 - 2.0mm Gap Range 18" Width x 19.5" Height x 9" Depth Plugs into standard 110 volt wall socket. Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.  

Read more less

Upgrade your home brewery with an innovative, Stainless Steel, 7 Gallon Brew Bucket™ Fermenter!  You will enjoy many of the benefits of a stainless conical fermenter but at a fraction of the cost and you are going to love how easy it is to use!  Made by Ss Brewing Technologies from polished 304 Stainless Steel, the Brew Bucket™ fermentor is not only functional it is downright beautiful. At MoreBeer!  we know brewing equipment and we truly believe this is a piece of equipment you are going to enjoy using every brew day. We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer.  The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking!   Etched Volume Markers on the inside were super handy when filling and display in both Liters and Gallons. The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid.  The lid includes a removable, molded silicone gasket that ensures an airtight seal.  We love an airtight seal so that we can be sure to see the airlock working.  The welded on stainless handles make the BrewBucket fermentor super easy to move.  Overall: Very functional, easy-to-use, will last a lifetime, and looks amazing. Lets make some beer! Features: Certified Food Grade 304 Stainless Steel Construction Patent Pending Stainless Rotating Racking Valve 6.95 gal Max Capacity 40° Conical Bottom for Trub Trapping Nests for Storage, Stacks for Ferment! Molded Silicone Lid Gasket Spring Loaded Lid Clamps for Airtight Lid Seal Offset Airlock Hole includes Silicone Stopper Gallon & Liter Markers inside for visual volume assessment Stainless construction resists damage and is easy to clean 21” Height x 13” Width 10 lbs Note: 1/2" Silicone fits into the lid hole for use as a blowoff.  3/8" ID tubing is perfect for racking beer from the BrewBucket's valve.

Read more less

The Ss recirculation manifold is a nice gentle way to recirculate your wort. The manifold sits on top of the grain bed and evenly distributes the flow through 24 different holes on top of the manifold. Works great with our recirculation bulkhead fitting (BE386) and 1/2" FPT to 3/8" knurled hose barb (BE387). The manifold will fit in Ss Brewtech 10-30 gal kettles and mash tuns. It's 12.6" in diameter of 304 stainless steel with a 3/8" hose barb inlet.

Read more less

Updating the iconic series of Chronical fermenters is not something Ss took lightly. The Chronical was a product launched in the earliest days of Ss Brewtech. It, along with the Brewmaster Edition that would join a few years later, has formed a core product line that has elevated the standard of what homebrewers have come to expect from a cylindro-conical vessel, and what homebrewed beer could be. So, with a blank sheet of paper, they went to work designing the ultimate Chronical fermenter. Priority number one was to continue on Ss's mission to elevate every home product they offered to sanitary connections and valves. For the Chronical 2.0 they addressed that by adding a new welded 3/4" TC sampling port, and paired that with an all-new sampling valve based on the Pure Flow sanitary technology. Secondly, Ss redesigned the lid to use the Unitank's lid-mounted cooling coil system, which removes the side-mounted weldless ports from the Chronical BME. The Chronical 2.0's lid-mounted cooling coils extend further down into the fermenter, enabling users to ferment partial batch sizes. Although Chronical 2.0 is a massive evolutionary leap forward, Ss also stayed true to the product line's core. The full-width lid, a revolution when the original Chronical launched is retained, the pro-inspired 60° cone, and bottom dump port is still here. And last but not least, the ever-popular neoprene jacket from the Chronical Brewmaster Edition is standard on Chronical 2.0.  This means that every Chronical 2.0 has a coil and jacket included as standard. Free shipping within the contiguous United States.

Read more less

Upgrade your home brewery with an innovative, Stainless Steel, 3.5 Gallon Brew Bucket™ Fermenter!  Many have asked for a smaller BrewBucket, and that has been heard.  The Brew Bucket mini is perfect for 2.5 gallon batches.  With features similar to the original 7 gallon Brew Bucket, the Mini is a great way to do smaller batches.  Whether you are interested in splitting a 5 gallon batch for experimenting, or just brew 2.5 gallons, the BrewBucket Mini is a great choice. Featuring a conical bottom, 304 SS construction, a rotating racking arm valve, and stackable design, these are space saving feature rich fermenters that are easy and enjoyable to use.  We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer.  The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking!   Etched Volume Markers on the inside were super handy when filling. The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid.  The lid includes a removable, molded silicone gasket that ensures an airtight seal.  We love an airtight seal so that we can be sure to see the airlock working. The welded on stainless handles make the BrewBucket fermentor super easy to move.  Features: 304 SS Food Grade Construction Rotating Racking Arm & Valve (Patent Pending) 3.5 Gal Max Capacity (2.5 gal Batches) 40° Conical Bottom for Trub Trapping Nests for Storage & Stacks for Ferment! SS lid w/ Silicone Gasketed seal Spring Loaded Lid Clamps for Airtight Lid Seal Offset Airlock Hole includes Silicone Stopper Gallon Markers inside for visual volume assessment Stainless construction resists damage and is easy to clean 8.5" Bottom Width / 11" Top Width x 16" Height Please note: the thermowell pictured in the second photo is not included.  

Read more less

Another great invention coming out of Ss Brewtech, the Keg WaSsher! This is a hands free, clean in place keg washer that will make cleaning kegs one of the easiest steps of the brewing process. Gone are the days of disassembling your keg to clean it. The cleaning process is pretty simple. Just take the keg lid off, attach the keg washer, attach both ball lock QDs, stick the whole thing upside down in a bucket full of sanitizer, turn on the pump and your keg is clean. The Keg WaSsher is designed to fit in a standard 5 gallon bucket. It also only uses 2 gallons of cleaning solution resulting in less chemical waste and evironmental impact. If you want to get fancy, you can set up a wash station with 3 buckets to perform an initial cleaning, fresh water rinse, and sanitizer. All you have to do is lift the whole apparatus from one bucket to the next! Features: Hands free operation Chemical resistant submersible pump Attaches to common ball-lock Cornelius-style kegs w/ removable lids Powerful CIP spray ball Entire assembly fits in 5-gallon bucket Cleans inside of keg and ports simultaneously Easily attaches/detaches from kegs Perform clean, rinse, and sanitize steps all with the same unit

Read more less

The Unitank 2.0 features 50% more cooling surface than the previous generation for better cooling efficiency and crashing performance. Manufactured with professional level quality that has been the standard for Ss Brewtech's professional-level Unitanks New Ss Brewtech Racking Arm co-molded with the geometry of the valve body and TC gasket which prevents the arm from coming loose Quickly carbonate beer in under 24 hours using the carb stone while precisely monitoring head pressure Adding an optional Sspunding Valve to the Unitank gives the brewer the ability to ferment under pressure An evolutionary step forward in homebrew technology. The Unitank 2.0 builds upon the venerable Unitank line by increasing the full body wall thickness from 1.2 to 1.5mm 304 Stainless Steel. Then we added a fully laser welded, professional-grade jacketed cooling solution to the already advanced feature set the original Unitank is known for. With up to 50% more cooling surface area, maintaining a stable temperature and crashing your beer has never been more efficient. Jacketed Cooling The benefits of jacketed cooling are numerous, and such engineering has become the standard in Ss Brewtech professional Unitanks for years. With Unitank 2.0, those same benefits are available to the 5, 10, 15 and 31 gal home or nano brewer. When paired with FTSs Touch and Ss Glycol Chillers, the Unitank 2.0 can provide an uncompromised level of fermentation control. The increased surface area of jacketed cooling allows more precise temp control not seen in the home brew industry. Additionally, the added surface area allows the fermenter to crash cool in even the most challenging environments. Another benefit of moving to jacketed cooling is that removing the coil makes the cleaning process much more straightforward. When used with the Ss Brewtech CIP ball, cleaning can be performed just as the pros do in craft breweries. Staggered inlet and outlet ports for the glycol jacket help with even coolant distribution in the jacket. The rear-mounted thermowell cleans up the coolant control wiring for an even more professional setup. Keyed Racking Arm Like the Chronical 2.0, the Unitank 2.0 features a version of the new Ss Brewtech Racking Arm co-molded with the geometry of the valve body and TC gasket; this ingenious design captures the racking arm and prevents it from coming loose. Additionally, the keyed elements of the valve allow the brewer to know precisely what direction the racking arm is facing based on the orientation of the valve on the vessel. What's more, the Unitank valve is the same full pressure-rated valve used on professional Ss Brewtech equipment. All the Valves & Ports The Unitank 2.0 continues with all the beloved features of the original Unitank. On top of all the fully welded TC connections and pro features, the Unitank 2.0 allows the brewer to quickly carbonate beer in under 24 hours using the carb stone while precisely monitoring head pressure. After fermenting and carbonating, the brewer can perform a true pressurized and closed transfer to a keg or canning machine significantly reducing the chances of oxidation when compared to open transfers. Higher pressure limits allow the user to dispense beer directly out of the vessel. Lastly, adding an optional Sspunding Valve to the Unitank  gives the brewer the ability to ferment under pressure and gives them the option to use the final few gravity points left of active fermentation to naturally carbonate their beer instead of force carbonate. This feature set and flexibility are why pro brewers use Unitanks in their brewing and packaging processes. Features: Welded Cylinder Glycol Jacket Fully welded TC flanges 15 PSI operating pressure Rotatable Silicone Racking Arm 1.5” TC Butterfly Valves 1.5” TC Carb Stone with 3/8” ball valve 1.5” TC Blow Off Arm with Welded Blow Off Arm Mount 1.5” TC to ½” Ball Valve for Blow Off Cane 1.5” TC Pro Sanitary Pressure Gauge 1.5” TC Pro Sanitary Sampling Valve 1.5” TC Thermowell 3” TC Pressure Relief Valve (PRV) 6” TC to 3" TC Lid Reducer (Dry Hop, CIP, and PRV Port) Neoprene Insulation Jacket Stainless Lower Shelf Adjustable Feet

Read more less

The Brew Bucket was the first product and the origin of Ss Brewtech, and for many brewers, the Brew Bucket was their first chance to ferment in stainless steel. Nearly a decade later, Ss challenged their engineering team to pair some of the newest technologies with the original design.   Brew Bucket Pure Flow Valve The star of the Brew Bucket 2.0 is the new Brew Bucket Pure Flow Valve. This valve uses Pure Flow technology, originally developed for the Ss line of professional brewhouses. The removable silicone membrane of the valve provides a sanitary environment where beer makes contact with nothing except silicone. Additionally, they have molded the racking arm geometry into the valve’s silicone diaphragm to provide a seamless flow path for beer when transferring from the Brew Bucket 2.0.   Sanitary Connection The valve attaches to the Brew Bucket using a welded external garden hose thread fitting that allows for a compact, easy-to-use connection without the need to fumble with additional clamps and gaskets. The threads are located externally and sealed by the gaskets built into the Pure Flow silicone, keeping them clean and sanitary. With the new valve design, the brewer can fully rotate the racking arm 360 degrees for maximum control while racking a finished beer.   Conical Base The Brew Bucket 2.0 continues what made the original a great solution for home brewers. The pro-inspired conical base helps minimize trub interaction with fermented beer, thus limiting any concerns of off flavors produced during maturation. Combined with the rotatable racking arm, brewers can effortlessly rack off clean beer like the pros do in craft breweries.   Full Width Lid The Brew Bucket 2.0 features the same full-width removable lid as the original, with a wide access opening that makes cleaning and sanitizing a breeze. Finally, the included thermowell has been repositioned to the lid, and the increased length allows for accurate readings, even when brewing partial batches.   Features Pro-Inspired Conical base Blow off port in lid for airlocks or blow off tubing Rotatable Silicone Racking Arm Pure Flow Valve for transfers and gravity samples 304 Stainless Steel 7 gallon capacity 300m Thermowell Thermometer | LCD Temp Display Module Dual Temp Wide lid with secure spring clamps Etched volume markings gals/liters Welded carry handles Surface safe Silicone Feet Specs: Tank Size: 7 gal Batch Size: 5 gal Dimensions: 24" H x 13" W x 13" D Weight: 11 lbs  

Read more less

Keep trub out of your fermenter by adding hops to your boil kettle using this Hop Spider Adjustable mounting arms make the Hop Spider compatible with most kettles up to 20 gallon in size Basket is removable for easy cleaning Made from 304 stainless steel and high temp silicone Keeping trub and hop material in your kettle and out of your fermenter is one of the critical components to ensuring clear beer in your pint glass! On top of that, brewing with whole cone hops can introduce a lot of hop leaf material that easily overwhelms and clogs transfer lines creating lots of headaches. Ss Hop Spider helps with these challenges by containing hop material within a fine mesh, photo-chemical etched basket. The basket sits inside a custom-designed ring mount with Silicone Adjustment Arms so you can dial in the Hop Spider for the perfect fit on your kettle.  Intended for use with SVBS, Ss Brewtech TC Brew Kettles (10 gal, 15 gal & 20 gal), and Ss Brewtech eKettles. Not compatible with Ss Brewtech 30 gal & 50 gal Brew Kettles and Ss Brewtech 5.5 gal Mini Brew Kettle.  Features: 400 Micron Photo-Chemical Etching Adjustable Mounting Arm Removable Basket for Easy Cleaning Specifications: 304 Stainless Steel and High Temp Silicone 6” Basket Diameter 15.5” Basket Height 15" Adjustment Arm Minimum Length 18" Adjustment Arm Maximum Length Package Dimensions: 11"H x 9.5"W x 19"L 6lbs

Read more less

Automatically release pressure inside your fermenter during pressure fermentations Regulate beer flow during pressurized transfers from fermenter to keg Built-in pressure gauge for easy reference when adjusting the spunding valve Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application Diaphragm spunding valves offer higher accuracy compared to spring & poppet spunding valves Comes complete with Duotight ball lock QD and rigid joiner With this complete kit you'll be ready to use the BlowTie 2 Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. This version of the Spunding Valve Kit includes the Duotight Ball Lock QD which allows you to attach the BlowTie directly to the QD via the 8 mm rigid joiner. The BlowTie 2 can also be upgraded with a Digital Mini Pressure Gauge. Pressure Fermentation Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately, you need a way to release excess pressure. You'll pressurize your vessel to your desired psi, but once fermentation begins and those hungry, active yeast start creating CO2, the pressure inside the vessel will increase. Attach a spunding valve and set it to your desired pressure, and it will blow off when the pressure gets to high and close up again when it's back to your desired psi. Pressure Transfers Even if you don't have a pressurizable fermenter, you may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process. Diaphragm vs. Poppet With the poppet style spunding valve, a spring pushes against a poppet to keep the valve closed. When the poppet lifts up to open, the surface area the gas pushes against becomes larger, and the spring has to work harder to push the poppet down and reseal the valve. This can lead to more gas being released than intended, and the remaining pressure in your vessel may be at a lower psi than your spunding valve’s set psi. Instead of a poppet, the spring inside the BlowTie pushes against a diaphragm, which has an immensely larger surface area. This means the surface area that the gas pushes against while the diaphragm is closed is significantly closer to the surface area it pushes against when the diaphragm is open. This leads to higher accuracy, and the remaining pressure after excess gas is released will be much closer to your set blow off pressure. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) 8 mm Duotight Gray Ball Lock Disconnect 8 mm OD Rigid Plastic Joiner

Read more less

The Vorlauf Arm Assembly is great for recirculating your mash. It fits right into the Ss Brewtech recirculation bulkhead fitting with a 1/2" knurled FPT locking nut.  Made from 304 stainless steel.  

Read more less

Our new FTSs quick disconnect kit is the perfect way to increase the efficiency of your cooling system while also making it easier to detach your fermenter's chiller coil for easy cleaning.  The neoprene sleeve both insulates and wicks away condensation to reduce temp loss in your FTSs tubing. The sleeve is 10 feet in total length and can be cut to custom lengths to adapt to any FTSs setup.  Once cut, use the included velcro strip to secure the sleeve to the quick disconnect fitting. The quick disconnect fitting was custom tooled for Ss Brewtech with 3/8" hose barbs and features all EPDM seals, which maintain sealing properties at low temperatures.  In addition, they include all stainless internal hardware, and integrated valves in both the male and female components to prevent spilling. These fittings work great with either glycol or chilled water from a cooler.  One Quick Disconnect option: (1) 10' Neoprene Sleeve (1) Quick Disconnect Fitting (2) Velcro strips (4) Stainless hose clamps Two Quick Disconnect option: (1) 10' Neoprene Sleeve (2) Quick Disconnect Fitting (4) Velcro strips (8) Stainless hose clamps  

Read more less

Replacement set of O-rings for Ss Brewing Technologies Brew Bucket ball valve and racking arm.

Read more less

The Chilling Coil kit can be used to update the 3.5 gal Brew Bucket Minis for temperature control. Then you can add an FTSs Touch kit for use with the Ss Glycol Chiller.  Features: 304 Stainless steel Immersion chiller coil Thick 5 mm zippered neoprene jacket FTSs designed lid included Weldless 200mm thermowell Included hose clamps (for chiller coil), 17mm stopper (for airlock) Specs: Assembled Dimensions: 17.5"H x 11.5"W x 11.5"D (on Bucket) Assembled Weight: 10lbs / 4.5kgs (on Bucket)  

Read more less

Automatically release pressure inside your fermenter during pressure fermentations Regulate beer flow during pressurized transfers from fermenter to keg Built-in pressure gauge for easy reference when adjusting the spunding valve Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application Diaphragm spunding valves offer higher accuracy compared to spring & poppet spunding valves Comes complete with ball lock QD, Duotight adapter, and rigid joiner With this complete kit you'll be ready to use the BlowTie 2 Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. This version of the Spunding Valve Kit includes the CM Becker Ball Lock QD, often considered the finest quality in plastic ball lock quick disconnects, and an 8 mm Duotight Flare Adapter for connecting to the BlowTie. The BlowTie 2 can also be upgraded with a Digital Mini Pressure Gauge. Pressure Fermentation Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately, you need a way to release excess pressure. You'll pressurize your vessel to your desired psi, but once fermentation begins and those hungry, active yeast start creating CO2, the pressure inside the vessel will increase. Attach a spunding valve and set it to your desired pressure, and it will blow off when the pressure gets to high and close up again when it's back to your desired psi. Pressure Transfers Even if you don't have a pressurizable fermenter, you may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process. Diaphragm vs. Poppet With the poppet style spunding valve, a spring pushes against a poppet to keep the valve closed. When the poppet lifts up to open, the surface area the gas pushes against becomes larger, and the spring has to work harder to push the poppet down and reseal the valve. This can lead to more gas being released than intended, and the remaining pressure in your vessel may be at a lower psi than your spunding valve’s set psi. Instead of a poppet, the spring inside the BlowTie pushes against a diaphragm, which has an immensely larger surface area. This means the surface area that the gas pushes against while the diaphragm is closed is significantly closer to the surface area it pushes against when the diaphragm is open. This leads to higher accuracy, and the remaining pressure after excess gas is released will be much closer to your set blow off pressure. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) CM Becker Gray Ball Lock Disconnect Duotight Flare Fitting 8 mm OD Rigid Plastic Joiner

Read more less

Designed to make moving unfilled brewing vessels easier. HD casters are designed for use on our fermenters and brite tanks 1BBL and under. Also can be used with our Ss Grain Mill Cart and other modular Brew Cubes. Not for use with our Nano Jacketed Unitanks. Stainless Steel caster frame with brake Designed for harsh brewery wash-down environments Ideal for use with Half BBL and 1BBL vessels 3" wheel diameter 3/8" UNC x 2" Zinc coated stems 250 lb static load rating per caster Includes stainless washer leveling kit The installation guide can be found here. Please note proper installation is required to prevent damaging the casters. *Not intended to be moved when full. *Not For Nano Jacketed Tanks

Read more less

Designed to work with the FTSs Touch to heat fermenting wort in colder climates. Includes XT30 Connector - Will not work with legacy FTSs controllers.

Read more less

Designed specially for the Ss Grain Mill. The top plate has precision machined mounting holes as well as a grain chute port. The removable bottom plate is designed to easily align a standard five-gallon bucket commonly used in grain transfer for home and nano breweries. Ss Grain Mill NOT included 304 stainless steel Approximately 20" x 20" x 17" Only compatible with the updated HD Casters. Not compatible with Standard length Casters.

Read more less

The Chilling Coil kit can be used to update the 14 gal Brew Buckets for temperature control. Then you can add an FTSs Touch kit for use with the Ss Glycol Chiller. Features: Thick 5 mm zippered neoprene jacket Immersion chiller coil mounted to 6" TC cap Cap | 3” TC with ½” Blow-Off 3/8" hose barbs on the chiller coil Included hose clamps (for chiller coil), TC Clamps, TC Gaskets Kit not compatible with Brite Tanks, Chronical Series, or Unitanks. Specs: Assembled Dimensions: 30"H x 16.5"W x 16.5"D (on Bucket) Assembled Weight: 30lbs / 13.5kgs (on Bucket)

Read more less

The BrewBuilt T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with the BrewBuilt X-Series Uni Conical Fermenter, the spunding valve attaches to the lid's 1.5" tri-clamp port where the blow off fitting is normally installed. It can also be used with any pressurizable stainless steel conical with 1.5" T.C. top ports. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process. Adjustable from 0.3–14.5 psi, designed for the X3  Made from 304 stainless steel 11.75" H x 4" Ø   For Your Safety: Never exceed the maximum rated working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.

Read more less

A stable mash temp is one of the most important elements of the brewing process. The Ss Brewtech InfuSsion Mash Tun is the perfect choice for brewer’s looking to upgrade their aging plastic cooler. It’s built to last, made exclusively of 304 stainless steel and designed for those who want professional grade equipment and features for their home brewery. The double walled construction with injected high density foam insulation is incredible at mitigating temp loss and holding temperatures stable throughout the duration of a typical mash rest. The venerable InfuSsion Mash Tun has been updated with TC ports throughout for easy integration with the rest of the Ss Brewtech line up. Additionally, the InfuSsion Mash Tun is the first Ss product to be released with the Patent Pending Pure Flow Valve platform. Fully sanitary, easy to clean, and micro adjustable Pure Flow valves are designed as the ultimate brewing valve. Pro-Inspired Pro features like a 5° sloped floor with center drain, zero deadspace design, etched volume markings, integrated thermowell, thermometer, and the ability to incorporate mash recirculation result in the most thoroughly engineered and efficient mash tun available to homebrewers.  Upgradable The InfuSsion Mash Tun is now equipped with a 3/4" TC recirculation bulkhead which allows quick installation of optional accessories such as the vorlauf attachment or a recirculation manifold. Pure Flow Valve With a clean slate, the Ss Engineering Team took a stab at creating the perfect sanitary valve for brewing. The foundation of the Micro Adjust Valve is a removable silicone membrane that seamlessly integrates TC gasket geometry. This ingenious design provides a 100% sanitary environment where beer makes contact with nothing except pure silicone while inside the valve. Features: 304 Stainless steel construction 1” thick insulated side walls and lid Sanitary TC ports 5° sloped floor with center drain eliminates dead space Gasket sealed stainless steel false bottom 1.5" TC Pure Flow Valve 3/4" TC recirculation bulkhead Redesigned feet with locking screw  Redesigned LCD thermometer Etched volume markings gals/liters What's Included: InfuSsion Mash Tun LCD thermometer (°F/°C) Silicone thermometer boot (2) 1.5" TC clamps (2) 1.5" TC gaskets Pure Flow Valve 1.5" TC Thermowell Silicone plug for recirculation hole 3/4" TC recirculation bulkhead Perforated false bottom Silicone false bottom gasket   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Ss BrewTech has done it again, taking brewing equipment to an innovative next level.  These are a premium lineup of feature rich all Stainless Steel Brew Kettles, designed to keep you brewing for a lifetime.  What really sets this boil kettle apart from the rest is the first ever integrated trub dam and pick-up tube assembly that Ss has designed into the back of the 304 Ss 1/2" ball valve (3pc).  It is a brilliant little piece which will help with a more efficient whirlpool, leaving more trub in the kettle, and bringing more wort to the fermenter!  Other features include robust triclad bottom, internal gallon markings, and strong riveted handles with molded silicone grips that can hang the lid. Features: Heavy duty 18 gauge 304 Stainless 1.2 x 1.0 height to width ratio Triclad bottom - no scorching! Internal etched gallon markings (starting at 1 gal!) Thermometer port High Quality Weldless Fittings Robust riveted silicone handles for safety Hang lid on side handles Optional coupling for thermometer Dimensions: 13.4" H x 11" W 5.5 Gallons total volume

Read more less

The Chilling Coil kit can be used to update the 7 gal Brew Buckets for temperature control. Then you can add an FTSs Touch kit for use with the Ss Glycol Chiller. Features: Thick 5 mm zippered neoprene jacket Immersion chiller coil mounted to 6" TC cap Cap | 3” TC with ½” Blow-Off and 300mm Thermowell 3/8" hose barbs on the chiller coil 17mm Plug for Brew Bucket Brewmaster Edition Included hose clamps (for chiller coil), TC Clamps, TC Gaskets Kit not compatible with Brite Tanks, Chronical Series, or Unitanks. Specs: Assembled Dimensions: 27.5"H x 13"W x 13"D (on Bucket) Assembled Weight: 22lbs / 10kgs (on Bucket)  

Read more less

Ss BrewTech's T.C. brewing kettle is made from quality 304 stainless steel and can last you a lifetime of home brewing. This high-quality boil kettle features an aluminum core Tri-Clad bottom to foster even heating and minimize the risk of scorching and allow for the use of induction heating. Tri-Clamp ports have long been the standard in professional brewing, and for a good reason, they're quick, sturdy, and sanitary.  The Ss T.C. Brew Kettle now brings this pro-level feature to the home brewer in an affordable package. The sturdy riveted silicone-coated handles are located on the front and back for easy moving and dumping of the kettle while also allowing for tighter brew stand setup. Just like the original Ss Brew Kettle, the T.C. version features an integrated trub dam into the dip tube to minimize the pickup of trub and hop material during knockout. The result is much clearer wort making its way into your fermenter. Features: Tri-Clad bottom Sanitary TC Ports Sturdy riveted silicone coated handles 3-piece TC ball valve with trub dam pick-up tube Lid designed to hang on side of handles Etched volume markings gals/liters Induction burner compatible Included Hardware: (2) TC Clamps (2) Silicone Clamp Gaskets 3-piece TC Ball Valve Dip Tube w/ Trub Dam Silicone Trub Dam Blade TC Port Plug Specs: Size Capacity Diameter Height 10 gal 10.7 gal 13.8" 16.5" 15 gal 15.7 gal 15.8" 18.9" 20 gal 22.7 gal 17.7" 21.3" 30 gal 31.1 gal 19.7" 23.7" 50 gal 53.0 gal 23.6" 28.3"   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.  

Read more less

Compatible with the new T.C. model and the original InfuSsion Mash Tun. This kit is designed to include all the necessary components to use the recirculation bulkhead included with the InfuSsion Mash Tun for vorlauf and mash recirculation processes. To install the kit on a standard mashtun begin by installing the included 1/2" FPT x 1/2" Barb on the exterior of your mash tun's recirculation bulkhead.  Be sure to use PTFE tape for a liquid-tight seal. If using the supplied kit on a TC mashtun, begin installation with included 3/4" TC to 1/2" 90 Barb, 3/4" TC gasket and clamp. Next, locate the 3/8" knurled locknut, 3/8" silicone tubing, and recirculation manifold.  Trim the tubing to your desired length, and then use the hose clamps to secure the two ends of the tubing to the manifold and locknut.  As a best practice, begin the mash recirculation for the first 5-10 mins using the vorlauf attachment to clear any small grain particulate and to set the mash bed, then swap the vorlauf attachment for the recirculation manifold for the remainder of the mash rest.  Please keep in mind this kit is designed to use with a wort pump and an external heat source, such as a RIMS tube to maintain mash temps, which is not supplied. Includes: Recirculation Manifold Vorlauf Attachment 3/8" Barb to 1/2" FPT Knurled Locknut (2) 3/8" Stainless Hose Clamps 1 Foot of 3/8" ID Silicone Tubing 1/2" FPT to 1/2" Hose Barb or 3/4" TC barb with gasket and clamp 3/4" TC to 1/2" 90 Barb ( for use with TC Mashtun )  3/4" TC Clamp ( for use with TC Mashtun )  3/4" TC Gasket ( for use with TC Mashtun )     

Read more less

Ss Brewtech took the features of pro brewing equipment and shrunk it down for the homebrewer with their new Brewmaster Edition Kettles. Built from high quality 304 stainless steel this kettle has it all. Rotatable racking arm and sight glass allow complete control of trub pick up. Also, the dish bottom and integrated fire box allow for faster boil times because of the increased surface area. All TC fittings are fully sanitary and the whirlpool coupler has a tangential inlet which provides a more effective whirlpool.  The BME Kettle from Ss Brewing Technologies has a feature set unmatched in the homebrewing market. Features: Integrated 1/2" ball valve with sight glass Tangential whirlpool inlet Fully welded TC ports Dished bottom for faster boil times Rotatable racking arm Etched volume markings 1.2 mm 304 SS Construction w/ 2 mm SS Base 12 Gallon Full Volume 13.8" Ø x 20" Height Note: Not intended for use with induction burners!

Read more less

Spunding valve for manual pressure setting. Adjustable from 0-2.2 bar (0-32 PSI) with a maximum deviation of 0.2 bar. We recommend disassembling the valve and lubricating all silicone parts with silicone grease before use. The polycarbonate glass should not be cleaned with PBW or other caustic chemicals.

Read more less

CIP (clean in place) is a commonly used technique to clean large craft brewing vessels. At Ss, we've taken the same principles used in our pro fermenters and scaled the design down for homebrewers to speed up their cleaning process and improve their sanitation practices, just like craft breweries. 304 Stainless steel construction 3" TC 1/2" MPT fitting Recommended to use with the 1/2" Hose Barb 2 bar / 29 psi / 7 gpm flowrate recommended Does not include TC clamp or gasket Pro version has a larger spray ball designed for larger pumps (17 GPM) and vessels 1BBL and larger.

Read more less

The Blichmann Engineering™ Spunding Valve is purpose-built for pressure fermentation. With exacting precision, you’ll turn out lager-like beer at ale temperatures in no time! Pressurized fermentation is a great option for creating lager-like flavor profiles at room temperature, without the hassle of temperature control. And you’ll complete your fermentations faster and easier. The Blichmann Engineering™ Spunding Valve is purpose built for homebrewers to control your pressures with exacting precision. Research by Blichmann Engineering™ and White Labs shows significant reduction of esters (fruity flavors found in most ales) and low levels of diacetyl, by fermenting under pressure. Key Features: Ferment under pressure to produce clean, low ester, lager-like beers Extremely fine adjustments from 0 to 35 psi, and superb pressure stability Suitable for vessels up to 42 gal (1BBL batch size) Perfect for naturally carbonating your beers Use for counter-pressure transfers Integral blow-off barb fitting adds a visual indication of fermentation if desired NPT model is perfect for the Blichmann Engineering™ Cornical™ Unitank (BL275) Also available in T.C. model (BL152)

Read more less

Racking Arm Replacement  Item(s) Included (1) Racking Arm Replacement (2) Replacement  set of O-rings included 

Read more less

Ss Brewtech took the features of pro brewing equipment and shrunk it down for the homebrewer with their new Brewmaster Edition Kettles. Built from high quality 304 stainless steel this kettle has it all. Rotatable racking arm and sight glass allow complete control of trub pick up. Also, the dish bottom and integrated fire box allow for faster boil times because of the increased surface area. All TC fittings are fully sanitary and the whirlpool coupler has a tangential inlet which provides a more effective whirlpool.  The BME Kettle from Ss Brewing Technologies has a feature set unmatched in the homebrewing market. Features: Integrated 1/2" ball valve with sight glass Tangential whirlpool inlet TIG welded TC ports Dish Bottom With FireBox for quicker boils Rotating racking arm Etched volume markings 1.2 mm 304 SS Construction With 2 mm SS Base 24 Gallon Full Volume 17.7" Ø x 26" Height Note: Not intended for use with induction burners!

Read more less

Blow off barb for the FTSs Lids and Brew Bucket/ Brewmaster Bucket Lid. Comes with the blow off barb, 2 gaskets and a lock nut. Features: Custom tooled for FTSs/Bucket lids! Fits into blow off / airlock hole 1/2" hose barb 304 Stainless construction Includes 1 spare o-ring (1 o-ring for use / 1 spare)

Read more less