Search results for "ftss"

Chill your beer in the summer and warm your beer in the winter! Use a chill water source when it's hot or warmed water if it's cold! Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. This particular unit is designed to work specifically with the 14 Gallon Chronical Fermentor. Brewers typically have limited the styles of beers they produce to the varying temperatures of the seasons. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the circulation pump (which, by the way, is quieter than a mouse) to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price. Features: Custom lid w/ 304 Ss immersion chiller coil Pro grade (super quiet) submersible pump 110-240V power supply 304 Ss weldless lid mounted thermowell Tailored neoprene insulation jacket Digital temperature controller

Read more less

Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away.  This system will hold your set temp both when it gets cold and when it gets warm! This kit is for owners of the Ss standard edition Chronical 14 Gallon fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.  Kit contents include: 1x heater pad for 14 Gal Chronical  1 x power supply 110-240V and 6A power supply for global use 1 x two-way switchable FTSs controller  1 x flat FTSs lid  1 x chilling coil  1 x lid mounted thermowell  10 feet of vinyl tubing  1 x lid stopper  1 x submersible pump  1 x custom tailored neoprene jacket for Chronical 14 gallon fermenter Digital temp controller displays both C/F Chill from 0.5-2 degrees F per minute Custom lid with 304 Ss immersion chiller coil 304 Ss weldless lid mounted thermowell Accurately monitor and control temps

Read more less

Chill your beer in the summer and warm your beer in the winter! Temperature control during fermentation is one of the keys to making world class beer at home. It can be difficult to achieve however, often requiring you to have a temperature controlled refrigerator dedicated to fermentation. Now with the FTSs temperature control package and either a Brew Bucket or Chronical,  you can maintain perfect fermenting temps all year.  This particular unit is designed to work specifically with the 14 gallon Brewmaster Edition Brew Bucket. The system is elegant and engineered to be as compact and affordable as possible. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the very quiet circulation pump to hold the fermentation temperature at your predetermined set point. You can cold crash or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price. Components: Custom lid w/ 304 SS immersion chiller coil Pro grade (super quiet) submersible pump 110-240 v power supply 304 SS weldless lid mounted thermowell Tailored neoprene insulation jacket Digital temperature controller Included vinyl tubing Required from you: Any type of cooler where you will add water and ice, or frozen jugs, to cool. You will submerse the included pump in the water.  To heat you can use a simple aquarium heater to raise the temperature of the water in the cooler A 14 gallon Brewmaster Edition Brew Bucket, FE804 Please Note: This Product is an add on for a 14 gallon Brewmaster Brew Bucket, and DOES NOT INCLUDE the brew bucket itself. 

Read more less

Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away.  This system will hold your set temp both when it gets cold and when it gets warm!   This kit is for owners of the Ss standard edition Chronical Half Barrel fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.  Kit contents include: 1x heater pad for Half BBL Chronical  1 x power supply 110-240V and 6A power supply for global use 1 x two-way switchable FTSs controller  1 x flat FTSs lid  1 x chilling coil  1 x lid mounted thermowell  10 feet of vinyl tubing  1 x lid stopper  1 x submersible pump  1 x custom tailored neoprene jacket for Chronical Half BBL fermenter Digital temp controller displays both C/F Chill from 0.5-2 degrees F per minute Custom lid with 304 Ss immersion chiller coil 304 Ss weldless lid mounted thermowell Accurately monitor and control temps

Read more less

Chill your beer in the summer and warm your beer in the winter! Use a chill water source when it's hot or warmed water if it's cold! Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. This particular unit is designed to work specifically with the Brew Bucket Mini. Brewers typically have limited the styles of beers they produce to the varying temperatures of the seasons. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the circulation pump (which, by the way, is quieter than a mouse) to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price. Features: Custom lid w/ 304 Ss immersion chiller coil Pro grade (super quiet) submersible pump 110-240V power supply 304 Ss weldless lid mounted thermowell Tailored neoprene insulation jacket Digital temperature controller

Read more less

Mount your FTSs control unit to the thermowell port of your SS Brewmaster Edition Chronical or Standard Brite Tank! Features: Matte Black painted stainless Mounts on thermowell port Custom built to fit FTSs digital controllers

Read more less

Replacement pre-drilled FTSs lid. Included with the the Ss BrewTech FTSs chilling system for the 1/2 bbl Chronical. Lid only. This does not include the other FTSs components.

Read more less

Add a 1.5" TC flange to virtually any vessel! Weldless design Ideal for FTSs and Brew Bucket flat lid pressurized transfers Use with the Pressurized Transfer Fitting FE26 (as shown in pictures) 304 Stainless Construction High heat compatible silicone O-ring Requires TC Clamp and Gasket 42 mm carbide hole saw recommended for installation Please note this product only includes the three pieces displayed in the first photo.

Read more less

These chiller coil extensions extend the length of the Ss Brewtech FTSs chiller coil for Brew Bucket and 7 gallon Chronical fermenters. Very useful if you brew partial batches and/or there is a cool ambient temperature forcing you to mostly heat your fermenter. Mounts under the lid to drop the coils further down. Made from 304 stainless steel and leak tested.

Read more less

4 replacement O-rings for Thermowell of Ss Brewtech FTSs: 16mm x 1.8mm O-ring for weldless thermowell and lid and coil seal on FTSs

Read more less

Replacement FTSs lid with pre-drilled holes. Fits the 7-gallon Ss Brewtech Chronical and Brew Bucket.

Read more less

The Ss Brite Tank is already an amazing piece of homebrewing equipment, and paired with a BrewMaster Upgrade Kit, you're one step closer to the ultimate home serving setup. This upgrade kit includes a TC Cap with stainless steel coil for cooling, and a thick Neoprene Jacket to keep the unit insulated! Combine with a Glycol Chiller for a stand alone home serving setup! Only works with 10 Gallon Brite Tank Features: 5 mm thick Neoprene Zippered Jacket Immersion Chiller coil mounted to 6" TC Cap Chiller Coil has 3/8" Hose barbs (matches up with FTSs system tubing!) Includes Hose Clamps. Pair with a Glycol / cooled liquid source, or click here for optional FTSs Temp Control Kit

Read more less

The ultimate control & precision of your fermentation process. Equipped with two built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of two separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers. 2 built-in submersible pumps with independent digital controllers Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 2 is designed to cool fermentations in small vessels. It features 2 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to two tanks can be controlled separately with one IceMaster Max 2. The Max 2 is the perfect unit for brewers with 1 or 2 fermentation vessels. The IceMaster 100 and IceMaster Max 4 are terrific chillers, but for they have far more cooling capacity than the average homebrewer needs. The Max 2 is the most affordable glycol chiller we offer, and thanks to the built-in submersible pumps and controllers, there's no need to purchase additional pump kits to use with your cooling system(s). Compatibility The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation. CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 2 you will only need the CoolStix and some tubing to connect it to the chiller.   Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 2. Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 2 you will only need the coil and some tubing to connect it to the chiller. Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank.    Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter. Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation.  At 75°F ambient temperature with neoprene insulation, the Max 2 can cold crash one 1 BBL BrewBuilt Jacketed Uni or two Jacketed Unis up to 15 gallons in size at one time to 38°F. Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. The unit comes with JoinTech Male Quick Disconnects installed as the inlet/outlet bulkheads, and also includes Female QDs with barbs to connect your tubing to the bulkheads. QDs to connect tubing to your cooling system are not included as the connection type depends on your setup. Length 1: 1st bulkhead (IN) to cooling system outlet Length 2: 2nd bulkhead (OUT) to cooling system inlet Specifications: 2 built-in submersible pumps with independent digital controllers Pump controller reads in °F / °C Temperature controller reads in °C Labeled IN and OUT bulkheads with Male QD JoinTech Dry Break Quick Disconnects (4) Female QD JoinTech Dry Break Quick Disconnect w/ 1/2" Barb included Tank Capacity: 17 L / 4.5 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 500 Watt/1700btu/0.14 tons Refrigerant: R600a Voltage: 110V Dimensions: 19" x 12" x 17.5" Wheels not included CE Certified   Note: The sight glass attaches to the front of the unit by threading the elbow fitting to the bottom threaded drain port, and attaching the other end to the upper mount. Note that the top of the sight glass is open to allow overflow to drain out if the reservoir is overfilled. Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.

Read more less