New Products Check out what's hot & new
SIGN UP FOR SMS Get deals sent straight to your phone
Detecting your location...
Free 5 lb CO2 tank with any KOMOS kegerator
$89.99 value · Ends Tue 10/20 at 11:59pm PT
Shop Kegerators

Vinmetrica SC-300 SO2, pH & TA Analyzer Pro Kit

    Description

    The SC-300 Pro Kit has everything the normal SC-300 has plus these accessories:

    • The Lab Support Stand
    • Vinmetrica Electrode Holder
    • The Double Burette Clamp
    • Magnetic Stirrer
    • Rinse Bottle
    • A Small Tube of Burette Detergent
    • 25 mL Glass Burette.

    One lean, mean wine analyzing machine. The SC-300 combines the SO2 detection of the SC-100A and the pH/TA analysis of the SC-200 into one power-packed instrument.

    It’s built on the same hardware and software as our other two analyzers, so the accuracy is superb. And it’s just as easy to use – The audible buzzer and visual stop light will automatically let you know when you’re tests are done!

    Because it does not rely on a color change, the SC-300 eliminates the guesswork in Ripper sulfite tests, especially in red wines!

    Why Choose Vinmetrica’s SC-300?

    Where else will you find a single, compact instrument that can measure sulfite (SO2), pH and TA (Titratable Acidity) levels throughout the fermentation and aging process? Even in Red Wines!

    It’s Accurate:

    • SO2: ± 2 ppm Free SO2.
    • TA: ± 0.2 g/L Tartaric acid
    • pH: better than ± 0.02 pH units

    Quick! – Less than 2 minutes per test!
    Affordable – About a $1 per test!*
    Easy to Use – No mystery solutions, pumps or tubing.

    *SO2 (Sulfite) Tests cost approximately 70¢ / Test (the cost of the reagents per test). If you do a combined pH and TA analysis, the cost of reagents for the pH/TA test is approximately $1.12 / Test.

    Complete Wine Testing Kit – Includes Everything Needed to Analyze Sulfite (SO2), pH and TA (Titratable Acidity) levels in Your Wines & Musts:

    • SO2 reagents
    • pH/TA reagents
    • Two titration beakers
    • Two 5 mL syringes
    • Two transfer pipettes
    • SO2 electrode
    • pH electrode
    • 25 mL sampling pipette (for SO2)
    • 5 mL sampling pipette (for pH/TA)
    • The SC-300 Operating Manual

    The SC-300 analyzer gives accurate SO2, pH and TA values. Kit includes everything to perform about 50 sulfite tests and 30 TA tests: both electrodes, all reagents, pipettes, syringe and beaker.

    A Quick Overview – Wine Analysis Procedures with the SC-300:

    Easy SO2 Test

    1. Attach SO2 electrode, press the power button, change to SO2 mode and press enter.
    2. Draw up 5 mL of titrant into the syringe and place 25 mL of wine in beaker.
    3. Add ~2 mL of the acidifier and ~2 mL of the reactant to wine.
    4. Place and hold the SO2 electrode in the wine sample and swirl beaker.
    5. Add titrant from syringe dropwise until 15 second long endpoint signal reached.
    6. Multiply the titration volume by 20, the SO2 conversion factor, results in ppm Free SO2.

    Simple pH Test

    1. Attach the pH electrode, set aside storage solution, rinse with DI water and blot gently with a paper towel.
    2. Press the power button then press the ‘Mode’ button and switch the SC-200 into ‘Cal’ mode.
    3. Calibrate using the pH 4 and pH 7 reference standards provided. Put the SC-200 in pH mode.
    4. Take 5 mL sample of wine, place in a beaker. Take a pH reading.

    Accurate TA Test

    1. For TA test, withdraw 5 mL of the TA Titrant with the syringe.
    2. Take 5 mL wine sample and add ~15 mL of deionized water.
    3. Put SC-200 into TA mode, place clean pH electrode gently in solution.
    4. Add TA Titrant from the syringe dropwise until the endpoint is reached indicated with the visual and audible signals. Record the volume (in mL) of titrant used.
    5. Multiply the titrantion volume by 2, the TA conversion factor, results in g/L Tartaric Acid.

    Vinmetrica Troubleshooting Guide

    Vinmetrica SC-300 SO2, pH & TA Analyzer Pro Kit

      Product form

      SKU: MT571

      $891.00

      Calculating shipping time...
      Shipping
      Free Shipping*
      Shipping
      Paid Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        Description

        The SC-300 Pro Kit has everything the normal SC-300 has plus these accessories:

        • The Lab Support Stand
        • Vinmetrica Electrode Holder
        • The Double Burette Clamp
        • Magnetic Stirrer
        • Rinse Bottle
        • A Small Tube of Burette Detergent
        • 25 mL Glass Burette.

        One lean, mean wine analyzing machine. The SC-300 combines the SO2 detection of the SC-100A and the pH/TA analysis of the SC-200 into one power-packed instrument.

        It’s built on the same hardware and software as our other two analyzers, so the accuracy is superb. And it’s just as easy to use – The audible buzzer and visual stop light will automatically let you know when you’re tests are done!

        Because it does not rely on a color change, the SC-300 eliminates the guesswork in Ripper sulfite tests, especially in red wines!

        Why Choose Vinmetrica’s SC-300?

        Where else will you find a single, compact instrument that can measure sulfite (SO2), pH and TA (Titratable Acidity) levels throughout the fermentation and aging process? Even in Red Wines!

        It’s Accurate:

        • SO2: ± 2 ppm Free SO2.
        • TA: ± 0.2 g/L Tartaric acid
        • pH: better than ± 0.02 pH units

        Quick! – Less than 2 minutes per test!
        Affordable – About a $1 per test!*
        Easy to Use – No mystery solutions, pumps or tubing.

        *SO2 (Sulfite) Tests cost approximately 70¢ / Test (the cost of the reagents per test). If you do a combined pH and TA analysis, the cost of reagents for the pH/TA test is approximately $1.12 / Test.

        Complete Wine Testing Kit – Includes Everything Needed to Analyze Sulfite (SO2), pH and TA (Titratable Acidity) levels in Your Wines & Musts:

        • SO2 reagents
        • pH/TA reagents
        • Two titration beakers
        • Two 5 mL syringes
        • Two transfer pipettes
        • SO2 electrode
        • pH electrode
        • 25 mL sampling pipette (for SO2)
        • 5 mL sampling pipette (for pH/TA)
        • The SC-300 Operating Manual

        The SC-300 analyzer gives accurate SO2, pH and TA values. Kit includes everything to perform about 50 sulfite tests and 30 TA tests: both electrodes, all reagents, pipettes, syringe and beaker.

        A Quick Overview – Wine Analysis Procedures with the SC-300:

        Easy SO2 Test

        1. Attach SO2 electrode, press the power button, change to SO2 mode and press enter.
        2. Draw up 5 mL of titrant into the syringe and place 25 mL of wine in beaker.
        3. Add ~2 mL of the acidifier and ~2 mL of the reactant to wine.
        4. Place and hold the SO2 electrode in the wine sample and swirl beaker.
        5. Add titrant from syringe dropwise until 15 second long endpoint signal reached.
        6. Multiply the titration volume by 20, the SO2 conversion factor, results in ppm Free SO2.

        Simple pH Test

        1. Attach the pH electrode, set aside storage solution, rinse with DI water and blot gently with a paper towel.
        2. Press the power button then press the ‘Mode’ button and switch the SC-200 into ‘Cal’ mode.
        3. Calibrate using the pH 4 and pH 7 reference standards provided. Put the SC-200 in pH mode.
        4. Take 5 mL sample of wine, place in a beaker. Take a pH reading.

        Accurate TA Test

        1. For TA test, withdraw 5 mL of the TA Titrant with the syringe.
        2. Take 5 mL wine sample and add ~15 mL of deionized water.
        3. Put SC-200 into TA mode, place clean pH electrode gently in solution.
        4. Add TA Titrant from the syringe dropwise until the endpoint is reached indicated with the visual and audible signals. Record the volume (in mL) of titrant used.
        5. Multiply the titrantion volume by 2, the TA conversion factor, results in g/L Tartaric Acid.

        Vinmetrica Troubleshooting Guide

        Documents
        Vinmetrica SC-300 Pro Kit
        SDS-SO2 Reactant
        SDS-pH7.00_Reference
        SDS-pH4.01_Reference
        SDS-TA_titrant
        SDS-SO2 Titrant
        SDS-SO2 Acid
        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Shipping Icon
        Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts. Learn more.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.
        Shipping Weight: 11.0 lb

        You Might Also Need

        pH Calibration Solution - Set of 2
        pH Calibration Solution - Set of 2
        $7.99
        Milwaukee Storage Solution for pH/ORP Electrodes
        Milwaukee Storage Solution for pH/ORP Electrodes
        $16.70
        Vinmetrica - SO2 Reagent Kit for MT560 & MT570
        Vinmetrica - SO2 Reagent Kit for MT560 & MT570
        $67.00
        Vinmetrica - Replacement SO2 Electrode for MT560 & MT570
        Vinmetrica - Replacement SO2 Electrode for MT560 & MT570
        $89.00
        TA Titrant for MT565 & MT570 - 130mL (0.13N Sodium Hydroxide)
        TA Titrant for MT565 & MT570 - 130mL (0.13N Sodium Hydroxide)
        $20.00
        Vinmetrica - Replacement pH Electrode for MT570
        Vinmetrica - Replacement pH Electrode for MT570
        $127.00
        • 5 stars: 1 (50%)
        • 4 stars: 1 (50%)
        • 3 stars: 0 (0%)
        • 2 stars: 0 (0%)
        • 1 star: 0 (0%)
        D
        David F.
        Pricey, but accurate

        Unless there is something uniquely complicated about the gauge or the probes, this seems like a lot of money to spend. However, that being said, the unit is accurate, well made, and relatively easy to use once you have everything in place.

        M
        Mark K.
        worth the investment

        While it might take a couple tests to get it all dialed in and learn just what to expect, this setup allows for easy accurate testing at a low cost per test. Support is excellent if you are new like me. Make sure you have some distilled and de-ionized water on hand to do the tests, as they are not included in the kit.

        A
        Anonymous

        How does one keep the PH probe from failing in long term storage?

        MoreBeer!

        While I do not have the answer I believe that so long as the probe is kept in the small vile of solution you should be good. You can also send the people at Vinmetrica a question. they have been great at answering my concerns.....cheers.

        MoreBeer!

        First of all you should be using the tool every month or two and just make sure to keep it in the solution provided and use fresh solution once a year.

        Login

        Forgot your password?

        Don't have an account yet?
        Create account