if you can’t find those. Go to your local weld shop. You can get larger 5lb or 8lb bottles.

Hi Skip! I bought a tank on Amazon or you can get one at your local scuba diving supply store. You have to get them certified so they are safe to fill then your off and oxygenating!!!

Try a welding supply store....

Ace Hardware?

Not sure why I'm asked to answer this question; I just own one I bought from MB. But in taking mine apart to check what you were talking about the gasket fell out and onto my garage floor. You might try a 3/8" OD O-ring; would seem to fit. Maybe Google "Oxywand manufacturer".

Don't ask me to help your customers unless you have something to offer in return. My time is precious just like yours.

Yes we do have these. The part number is KEG602.

Uses 1/4 inch tubing. Great product. Strongly recommend.

Yes the wand/stone and PBW/Starsan. You want to keep this extremely clean and free of clogs. I soak it in hot PBW overnight and flush and soak in Starsan on brewday.

This is just the wand. You need the tubing and regulator. If you get the kit that is everything you need. https://www.morebeer.com/products/oxywand-oxygenation-kit-05-micron.html

You will need an appropriate regulator for your o2 tank and tubing. Some add an inline filter as well.

You need the regulator as well. https://www.morebeer.com/products/oxywand-oxygenation-kit-05-micron.html

You will need to buy the connectors (FE392A) or buy the combined kit FE391 which includes both the wand and the connectors. It is less expensive to buy the combined kit rather than purchasing separately. I upgraded an older kit to a wand so was able to just purchase just the FE392 wand.

You would still need a regulator for the tank. Most have barbed fittings so you likely wouldn’t need any kind of connectors.

Yes--you need a regulator for the oxygen bottle and tubing to connect the regulator to the wand. There are many kinds of regulators a typical one is something like this: https://www.morebeer.com/products/oxygen-regulator.html If you want to see other options go here: https://www.morebeer.com/category/wort-oxygenation-aeration.html

This is just the wand itself. Beyond an O2 tank you'll need a regulator (like the one referenced in the description) and a length of 1/4" tubing to go from the regulator to the wand (hose clamps are probably a good idea but not necessarily required). Hope that helps.

You will need some sort of regulator between the O2 tank and wand. Also tubing. OxyWand Oxygenation kit has everything but the disposable red O2 bottles (morebeer product FE391)

I went with an industrial grade O2 tank from a national welding company so I had to purchase a O2 regulator. I'm not sure if you need to purchase a regulator If you buy the throw away hardware O2 tank.