Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread
Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread
SKU: DUO104
$4.79
Calculating shipping time...
Important Warnings & Shipping Info
Free Shipping:
Fast & Free Shipping over $79
Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts. Learn more.
Freight Shipping: This item ships freight only.
Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.
J
The duotight fitting work great I am changing all my keezer lines over with no problems
J
The duotight fitting work great I am changing all my keezer lines over with no problems
S
Worked the first time and everytime.
A
This thing is perfect for the use case - a simplified DuoTight connection at the end of a tap shank or on a Sankey keg (I think, haven't tried that but the threading should be the same).
K
It fit the coupler perfectly !!
J
The DuoTight fittings are the way to go, but with the myriad of sizes for hoses and fittings, regulator barb fittings, keg line requirements for compessation of PSI, metric vs standard, and other connector requirements, it can be really confusing, and over buying will result. It would be nice if there were some standard guide how to employ these fittings, but I am glad with the purchase, nonetheless.
M
I upgraded to these and love how simple they are to use.Just make sure you cut the tube going in very square. My first cut has a little bit on an angle and it leaked. I squared it up and it's been perfect.
J
No complaints..does what its supposed to do
j
First off, I love the ease of the Duotight connectors for changing couplers/disconnects if you switch between commercial kegs and ball lock kegs. What I don't like is how easy it is to over-tighten the fittings and cause a hairline crack that eventually leaks gas - whether right away or after some time/pressure.
B
Great product. We use these in a Piaggio Ape based mobile bar, where lines are often installed and removed same day to support an event. Clean and simple.
W
Super easy to use, will keep using this in future
S
These are so simple and easy. No leaks
P
Was having considerable trouble with foaming on my Sanke tap and this, along with the new EVA tubing, really helped.
L
These fittings worked much better than what we previously had on our kegerator. Some reviews did not like the fittings but so far I am sold on them.
M
Easy to add for change over to duotight fittings. One less washer to keep track of in my keezer toolkit. So far no leaks.
J
If you are using Intertap faucets and EVABarrier tubing - this is all you need to source a new tap. I would recommend using the 4mm EVABarrier tubing for product lines (more resistance). One caveat - my experience is this ONLY WORKS with INTERTAP stuff. It MAY work with Nukatap...when I tried it, it absolutely would not seal correctly with a Kroma tap. It has little keyway cuts that Intertap faucets work with. Bonus, it comes with the seals and Duotight fitting, back nut and front flange...all you need is the faucet and EVABarrier tubing, plus the matching Duotight FFL connector and a cornelius connector for the product line.
R
I was nervous about trying these, but for the price point, decided to go with them. Easy to install right out of the box, and works flawlessly. I was not thorough in the first order of these, and missed a couple of needed components. Recommend being more careful to get everything needed (in the correct size) the first time.
B
These work really well with the EVA-barrier tubing, if you push the tubing in all the way, It took a while to figure out how to remove the tubing (the same way you get your fingers out of a Chinese finger trap).
M
Screw this on, plug your tubing in and you are done. Nothing could be simpler. I only wish this was available when I first built my keg system as it is very clean and easy.
G
This was delivered quick;ly and is easy to use. Duotight fittings are quick to assemble and work great
A
No more hose clamps! Kinda wish they have 90 degree angled ones.
D
Excellent replacements!
A
Would this work with a welded shank?
A
Does this fitting work with welded barb shanks? https://www.morebeer.com/products/komos-beer-faucet-shank-312-nipple.html
No it will not.
Yes. I just had to cut the nipple off the shank with a hacksaw and just screwed on the fitting; works great!
A
Will this work with my 1244A Beer Faucet Shank? I am using EVA tubing which will not seal on the barb fitting included.
A
Will this work with my D1244A Beer Faucet Shank? Would be my answer since EVA tubing will not work with the tail piece barb.
I would think it will work with your shank. I'm using it with my three D1247 4" shanks and it all works fine. I would suggest you use the Push-In Fitting elbow. It makes the routing of the tubing a little easier.
Absolutely! That's the part. Part number DUO104. Cheers!
A
Will the female beer thread Duotight fit a u system Guinness coupler or only the Sankey coupler?
Yes. The threading on this will fit all styles of Sanke coupler.