Free shipping on orders over $79!

Oxygen Stone - 0.5 Micron (Flare Threads)

    Description

    New! Easier to Sanitize Design 
    This innovative design was the result of customer feedback about the difficulty of santizing our traditional barbed stone when tubing was attached. We added threads instead of a barb and now you can use the fittings you see at the bottom of this page to connect and disconnect your tubing. This allows you to place the stone by itself directly in a pot of boiling water to sanitize. Easy.

    316 Stainless
    1/2" diameter. Stone is 1" in length. Overall length is 1 7/8"


    To Sanitize
    To properly sanitize your stones, we recommend you run it in a sanitized solution for 5 minutes. If the stone becomes clogged we recommend boiling the carb stone for 1-3 minutes to help break down anything within it.

    Important Notes
    You do not want to touch the stainless stone portion with your hands. The oils on your fingers can actually clog the small pores in the stone.

    The stone does not come with the barb fitting or flare nut - those will have to be purchased on their own. See the Related Items below.

    The .5 Micron stone is more commonly used for carbonation. However it can be used pre-fermentation with an O2 tank and regulator for oxygenation. Not the ideal choice if you want to aerate with an oxygen pump (aquarium pump) - use KEG590 for aeration. And if you are looking for a neat, all-in-on complete system for carbonation check out our Carbonating Keg Lid.

    Oxygen Stone - 0.5 Micron (Flare Threads)

      Product form

      SKU: KEG591

      $14.99

        Free Shipping on orders over $79

        WARNING : This product can expose you to chemicals including Chromium, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

        Description

        New! Easier to Sanitize Design 
        This innovative design was the result of customer feedback about the difficulty of santizing our traditional barbed stone when tubing was attached. We added threads instead of a barb and now you can use the fittings you see at the bottom of this page to connect and disconnect your tubing. This allows you to place the stone by itself directly in a pot of boiling water to sanitize. Easy.

        316 Stainless
        1/2" diameter. Stone is 1" in length. Overall length is 1 7/8"


        To Sanitize
        To properly sanitize your stones, we recommend you run it in a sanitized solution for 5 minutes. If the stone becomes clogged we recommend boiling the carb stone for 1-3 minutes to help break down anything within it.

        Important Notes
        You do not want to touch the stainless stone portion with your hands. The oils on your fingers can actually clog the small pores in the stone.

        The stone does not come with the barb fitting or flare nut - those will have to be purchased on their own. See the Related Items below.

        The .5 Micron stone is more commonly used for carbonation. However it can be used pre-fermentation with an O2 tank and regulator for oxygenation. Not the ideal choice if you want to aerate with an oxygen pump (aquarium pump) - use KEG590 for aeration. And if you are looking for a neat, all-in-on complete system for carbonation check out our Carbonating Keg Lid.

        Recently viewed products

          Login

          Forgot your password?

          Don't have an account yet?
          Create account