New Products Check out what's hot & new
SIGN UP FOR SMS Get deals sent straight to your phone
Detecting your location...

Anvil Temperature Controller

    Description

    The Anvil temperature controller is tuned and designed for home brewing. No need to spend time configuring and fiddling with settings. Just plug it in and start controlling your temps! The unique design has an integral male plug on the back allowing it to be to plugged into any 120V wall receptacle greatly reducing cable clutter and eliminating the need to drill holes for mounting. Simply plug your refrigerator or pump into the front and you’re ready to go. The 9.5 ft long sensor cable reaches anywhere you need. We’ve also selected a robust 15A internal relay for long life and more capacity than the competition. All this at one cool price.

    Features:
    • 120V 15A operation
    • Control temps to +/- 1F
    • Temperature Control Range: 16 - 220°F
    • Fahrenheit display
    • Selectable heat and cool modes (not dual stage)
    • Plugs into any 120V wall receptacle – no mounting holes needed!
    • Reduced cable clutter
    • Plug can be inverted to match your receptacle
    • 9.5 ft sensor cable length
    • 1.5" sensor probe length
       

    Anvil Temperature Controller

      Product form

      SKU: FE655

      $27.49

      Shipping
      Free Shipping*
      Shipping
      Paid Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        Prop 65 Warning WARNING : This product can expose you to chemicals including Lead and lead compounds, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

        Description

        The Anvil temperature controller is tuned and designed for home brewing. No need to spend time configuring and fiddling with settings. Just plug it in and start controlling your temps! The unique design has an integral male plug on the back allowing it to be to plugged into any 120V wall receptacle greatly reducing cable clutter and eliminating the need to drill holes for mounting. Simply plug your refrigerator or pump into the front and you’re ready to go. The 9.5 ft long sensor cable reaches anywhere you need. We’ve also selected a robust 15A internal relay for long life and more capacity than the competition. All this at one cool price.

        Features:
        • 120V 15A operation
        • Control temps to +/- 1F
        • Temperature Control Range: 16 - 220°F
        • Fahrenheit display
        • Selectable heat and cool modes (not dual stage)
        • Plugs into any 120V wall receptacle – no mounting holes needed!
        • Reduced cable clutter
        • Plug can be inverted to match your receptacle
        • 9.5 ft sensor cable length
        • 1.5" sensor probe length
           
        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Shipping Icon
        Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts. Learn more.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.
        Shipping Weight: 1.1 lb
        • 5 stars: 0 (0%)
        • 4 stars: 2 (100%)
        • 3 stars: 0 (0%)
        • 2 stars: 0 (0%)
        • 1 star: 0 (0%)
        J
        Jim H.

        Simple to operate and no extra clutter.

        R
        Rex M.
        Good purchase. My fermenting is improved

        Nice price. Is great. my first attempt at a lager. Easley had it down to my planned 43 degrees. It kept it there and stable for weeks. Good purchase

        A
        Anonymous

        If using this with a refrigerator how does it affect the temperature in the freezer? For example if you set it at 65 for the refrigerator what is the temperature of the freezer?

        MoreBeer!

        This unit will shut the power off when the desired temperature is reached. You plug the kegerator or heat wrap pad into this unit. Not really intended for use with two different cooling compartments. I use it for controlling heat wrap temps on my Carboy while brewing.

        MoreBeer!

        Marc If your fridge/freezer combo is regulated from the same setting control it will impact your freezer temp depending on the amount of insulation your freezer compartment has. Since you are not likely to be changing the fridge temp by much (maybe just going down to near freezing for a crash and up to 55ish for cellaring) you should be able to retain freezing temps up top. I am not sure whether units with separate controls would respond but you would expect les impact.

        MoreBeer!

        It certainly will affect the temperature in the freezer since it’s actually turning the entire unit (both refrigerator and the freezer) on and off. The freezer will increase in temperature until the appliance is turned back on then it’ll get back to the temperature set within the freezer

        A
        Anonymous

        Under features it says “Plug can be inverted to match your receptacle”. Do I have to take the temperature controller apart to do this? Or does the plug rotate freely?

        MoreBeer!

        You do not have to take apart the temperature controller itself. All the adjustments happen at the power brick where it plugs into the wall or power strip. You can adjust it so that the brick sits above below or to the side of the outlet for the most convenient orientation for anything else plugging in along side it.

        A
        Anonymous

        Is the probe submersible?

        MoreBeer!

        No It is designed to be used in a thermowell

        A
        Anonymous

        Is there a reccomend way to mount the probe thru the side of a brew pot?

        MoreBeer!

        The standard way is to drill a hole in the side of your kettle and install a thermowell. We have a thermowell that comes with a bulkhead (FE615) or you can purchase a bulkhead (H727) and thermowell (FE622). If you don't want to drill a hole you can use a thermowell such as (H973) and clamp it to your kettle with a removable clamp.

        A
        Anonymous

        Does any of the documentation state a wattage specification? 120V / 15A should be able to manage up to 1800W. I want to use this unit to control a 1650W immersion heater in a RIMS tube but want to make sure it can handle the power requirement.

        MoreBeer!

        I have not used my controller as my design changed. I agree with your assumption that it should be 1800 watt capacity. 1500 watt usage will provide an ample safety factor

        MoreBeer!

        The label on the back of the unit says 1800 Watts max.

        MoreBeer!

        You are correct that this controller can handle up to 1800 watts total. The relay is rated to 15 amps which is one of the standard for 120v outlets. There should be no problem running your 1650 watt element.

        Login

        Forgot your password?

        Don't have an account yet?
        Create account