Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
The FastFerment Collection Ball lets you harvest and store your yeast for future batches. Having an extra ball means you can store yeast from your previous brew, while collecting yeast from your current! Grab a few of these to keep your favorite strains on hand for fast fermenting anytime! You will need a FastFerment base unit in order to use this product. Comes with Ball, Union Connection, and stopper.
The ported version of our popular PET Plastic carboy. No more siphoning thanks the hole located 2 inches from the base of the unit. This version comes with our trusty plastic bucket spigot (FE347). To install the spigot you will need the installation tool (FE311A) to hold the nut in place as you thread in the spigot. Your days of lugging heavy glass carboys around are over thanks to these plastic carboys! Our Plastic Carboys are made from 100% Virgin PET plastic, which is far more resistant to oxygen than regular plastic. They’re much lighter and safer than glass, which is good if you need to move your fermenter around the house to find the right temperature. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. In addition to being safer to handle, they’re more economical than glass as well. With no ribs on the sides, there’s no place for yeast and sediment to collect, making cleaning a breeze. We suggest cleaning them with an overnight PBW soak, shake, rinse, and sanitize. You’ll want to avoid vigorous scrubbing during cleaning to avoid scratches. Two special features we love about our PET Carboys are the punted base and extra head space. The punted base makes the carboy easier to hold while carrying or pouring, and prevents sediment disturbance during transfers. The extra head space is a huge plus to make sure you have enough room for when your fermentation gets going. Specifications:
Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.0 lbs Rated to 140 degrees F Height: 16 inches Diameter: 9 inches Completely taste and odor free Punted base to prevent sediment disturbances during transfer Spigot included
Stainless steel spigot for wide mouth glass carboys, jugs, and beverage dispensers. Standard left to right turn.
Compatible with Farro Glass ported wide mouth glass carboys.
Threading: M16 x 1.25
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom for less sediment transfer during racking O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
Stainless steel hop filter for the FastFerment. This hop filter will fit both 7.9 gal and 14 gal FastFerments.
Specifications:
17 in. (43.2 cm) long
Stainless steel
Works with both 7.9 G & 14 G FastFerments
300 microns
Mesh bottom
Made from FDA-approved, food-grade plastic, these fermenters are ideal for the initial ferment of wine, especially red wines. 22.5" Tall by 20" diameter (25" in diameter including handles)
Photographed in picture with optional lid.
Stainless steel spigot for wide mouth glass carboys, jugs, and beverage dispensers. Stainless twist handle.
This spigot is compatible with the old model of Farro Glass Wide Mouth Carboys below. For the compatible spigot with the new model carboy, See related product.
The ported version of our popular PET Plastic carboy. No more siphoning thanks the hole located 2 inches from the base of the unit. This version comes with our trusty plastic bucket spigot (FE347). To install the spigot you will need the installation tool (FE311A) to hold the nut in place as you thread in the spigot.
Your days of lugging heavy glass carboys around are over thanks to these plastic carboys! Our Plastic Carboys are made from 100% Virgin PET plastic, which is far more resistant to oxygen than regular plastic. They’re much lighter and safer than glass, which is good if you need to move your fermenter around the house to find the right temperature. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. In addition to being safer to handle, they’re more economical than glass as well. With no ribs on the sides, there’s no place for yeast and sediment to collect, making cleaning a breeze. We suggest cleaning them with an overnight PBW soak, shake, rinse, and sanitize. You’ll want to avoid vigorous scrubbing during cleaning to avoid scratches.
Two special features we love about our PET Carboys are the punted base and extra head space. The punted base makes the carboy easier to hold while carrying or pouring, and prevents sediment disturbance during transfers. The extra head space is a huge plus to make sure you have enough room for when your fermentation gets going.
Specifications:
Uses a #10 stopper or a 5 Gallon Carboy Hood.
Weighs 1.5 lbs
Rated to 140 degrees F
Height: 19 inches
Diameter: 10.5 inches
Completely taste and odor free
Punted base to prevent sediment disturbances during transfer
Spigot included
This optional lid is a great accessory if you want a more convenient way to move your Flat Bottom FermZilla around. Includes a silicone grommet for your airlock pre-installed.
This unique FermZilla lid piece does not require thread tape, o-rings or washers to form an airtight seal.
Please Note: This lid is not pressure rated.
KegLand Part Number: KL20848
Specially designed for long-lasting use in demanding environments, each round Lavex bin is made of heavy-duty plastic resin. The resin is engineered to take a beating, making it strong and sturdy enough to withstand impact, while resisting cracking. NSF-listed and FDA-approved, the resin also makes each bin food-safe and ideal for bulk food storage.
32 gallon round food grade plastic container. Ideal for primary fermentation of grapes, and general storage.
A 32 gallon bucket will hold around 300 pounds of grapes, enough for about 18 gallons of finished wine.
NSF-listed and FDA-approved, the resin also makes each trash can food-safe and ideal for bulk food storage.
Made in America
White FDA approved food grade fermenters for the intitial ferment of wine, especially red wines. 24.25" round by 27.5" tall. (Handles stick out 2.5" on two sides)
Plastic spigot with 0.39" barb for wide mouth glass carboys, jugs, and beverage dispensers. Barbed end with twist handle.
Direct replacement spigot for ported Farro Glass Wide Mouth Carboys.
There are some tools you simply can't do without. Once you have discovered the “flexibility” of this funnel and all of the places it can be used, you will never go without one again!
This 9 inch Funnel with a flexible output hose can be used when transferring liquid into a carboy, adjusting to where you need it to fit into the carboy neck. The flexible tubing also means you can use it anywhere you need to maneuver tight quarters or strange configurations.
Monitor and track your fermentation from your computer or phone with Speidel's new Garspundmobil. The monitor sits on your Speidel airlock and measures temperature and counts the number of bubbles coming from your fermentation. It uses this information to show you how active your fermentation is and estimate the gravity.
Features:
Measures fermentation activity by counting the number of bubbles passing through your airlock
Measures temperature of your fermentation
Sends this information to MySpeidel wirelessly
Uses network standard: IEEE 802.11 b/g/n
Device's status is shown through a light inside the unit
USB cable included
Replace a lost or broken collection ball for your 14 gallon FastFerment or just get an extra one to store more yeast! The collection ball is 40.6 oz (1200 ml) and made from food grade HDPE.
The ported version of our popular PET Plastic carboy. No more siphoning thanks the hole located 2 inches from the base of the unit. We recommend using our plastic bucket spigot (FE347). To install the spigot you will need the installation tool (FE311A) to hold the nut in place as you thread in the spigot.
Your days of lugging heavy glass carboys around are over thanks to these plastic carboys! Our Plastic Carboys are made from 100% Virgin PET plastic, which is far more resistant to oxygen than regular plastic. They’re much lighter and safer than glass, which is good if you need to move your fermenter around the house to find the right temperature. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. In addition to being safer to handle, they’re more economical than glass as well. With no ribs on the sides, there’s no place for yeast and sediment to collect, making cleaning a breeze. We suggest cleaning them with an overnight PBW soak, shake, rinse, and sanitize. You’ll want to avoid vigorous scrubbing during cleaning to avoid scratches.
Two special features we love about our PET Carboys are the punted base and extra head space. The punted base makes the carboy easier to hold while carrying or pouring, and prevents sediment disturbance during transfers. The extra head space is a huge plus to make sure you have enough room for when your fermentation gets going.
Specifications:
Uses a #10 stopper or a 5 Gallon Carboy Hood.
Weighs 1.5 lbs
Rated to 140 degrees F
Height: 19.25 inches
Diameter: 11.25 inches
Completely taste and odor free
Punted base to prevent sediment disturbances during transfer
Does not come with spigot.
The ported version of our popular PET Plastic carboy. No more siphoning thanks the hole located 2 inches from the base of the unit. We recommend using our plastic bucket spigot (FE347). To install the spigot you will need the installation tool (FE311A) to hold the nut in place as you thread in the spigot. Your days of lugging heavy glass carboys around are over thanks to these plastic carboys! Our Plastic Carboys are made from 100% Virgin PET plastic, which is far more resistant to oxygen than regular plastic. They’re much lighter and safer than glass, which is good if you need to move your fermenter around the house to find the right temperature. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. In addition to being safer to handle, they’re more economical than glass as well. With no ribs on the sides, there’s no place for yeast and sediment to collect, making cleaning a breeze. We suggest cleaning them with an overnight PBW soak, shake, rinse, and sanitize. You’ll want to avoid vigorous scrubbing during cleaning to avoid scratches. Two special features we love about our PET Carboys are the punted base and extra head space. The punted base makes the carboy easier to hold while carrying or pouring, and prevents sediment disturbance during transfers. The extra head space is a huge plus to make sure you have enough room for when your fermentation gets going. Specifications:
Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.0 lbs Rated to 140 degrees F Height: 16 inches Diameter: 9 inches Completely taste and odor free Punted base to prevent sediment disturbances during transfer Does not come with spigot.
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot, airlock and stopper.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks
Suggested Applications:
12L: Perfect for storing small lots and experimental batches or taking some of your beer or wine along with you to your next party.
20L: Ideal for secondary fermentation and storage of 5 gallon batches.
30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube.
60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy!
120L: Ferment & Store large batches of anything - your creativity is the only limit!
Approximate Dimensions: 10in Diameter x 14in Height (w/out airlock in place). Note - The maximum temperature that these plastic fermenters can handle is 140F.
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
Get on your way to making delicious beer with the FermZilla Flat Bottom Starter Kit. The kit includes the 30L Flat Bottom FermZilla as well as the most precious brewing tools you'll need when making your first batch and beyond. Bottle capper, hydrometer, bottling wand and more, all bundled together at an unbeatable price.
The FermZilla Flat Bottom Fermenter is an excellent option for making all kinds of beverages, from beer and wine to kombucha and cold brew coffee. It's compact, lightweight, and made of brilliantly smooth PET. The extra-large lid opening makes it easy to get your arm inside and scrub the walls clean after use. The Flat Bottom features the same lid as the Conical FermZilla's, so installing accessories like a thermowell or Temp Twister Cooling Coil couldn't be easier.
Why MoreBeer! loves the Flat Bottom FermZilla:
Super smooth PET makes cleaning very easy.
Tight-sealing lid and PET material make for a better oxygen barrier than fermenters made of HDPE.
Lightweight and easy to move around, yet strong enough to be considered shatterproof.
The 4.75" lid opening makes it easy to get your arm inside and clean after use.
The lid is designed for the easy installation of accessories such as a thermowell or cooling coil.
Affordable! The Flat Bottom is one of the most affordable plastic fermenters in this size range.
What's Included:
FermZilla 30L Flat Bottom Fermenter
3-Piece Airlock
Adhesive Thermometer
Adhesive Voume Marker
Siphon
Bottling wand
Beverage tag
(4) Sachets of cleaning powder
(100) Crown bottle caps
Bottle capper
Hydrometer
Bumper stickers
Specs:
30 L (7.9 gal) Total Volume
Temperature Rated to 122°F
Height - 18.5"
Height w/ Airlock - 22.5"
Tank Diameter - 13.75"
Lid Ports - 28 mm PCO 1881 threads
Please note: The Flat Bottom is not pressure rated and was not designed to carbonate in. For this reason, the lid does not come with a PRV like that which is included with the Conical FermZilla. The tank can withstand approximately 2 psi, but beyond that there is risk of deforming and damaging the tank.
Kegland Part number: KL13550
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot and oversized 2-piece Speidel airlock.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks
Suggested Applications:
12L: Perfect for storing small lots, making experimental batches and taking some of your beer or wine along with you to your next party.
20L: Ideal for secondary fermentation and storage of 5 gallon batches.
30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube.
60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy!
120L: Ferment & Store large batches of anything - your creativity is the only limit!
Approximate Dimensions: 13.5in Diameter x 18.5in Height (w/out airlock in place). Note - The maximum temperature that these plastic fermenters can handle is 140F.
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
Don't hurt your back lifting and moving fermenters of must that can weigh up to 150 pounds. This dolly is made from tough plastic and features five sturdy casters. It locks onto the bottom of our food grade wine fermenters allowing for easy transport.
Does not fit our 10 gal white plastic fermenter (WE505)
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot and oversized 2-piece Speidel airlock.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks
26"L x 18"W x 26"H, 11 lbs
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
Heavy-duty HDPE plastic fermentation and stoarge tank
Made from food-safe materials with extra thick walls to preserve the aroma of your beverage
Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid
Wide top port opening for easy cleaning
Airlock & stopper included
Made in Germany by Speidel
The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable.
Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you!
These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price.
Key Features:
Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass.
Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making.
Built-in handles make these tanks easy to move, even when full.
Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush!
All ports seal with gaskets and the vessel can be fully sealed for long-term storage.
Includes a spigot and oversized 2-piece Speidel airlock.
Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks.
22"L x 16"W x 22" H, 8.82 lbs
FAQ:
Can filled containers be carried by the handles?
Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs).
Is there an upper limit on the alcohol content of the stored liquid?
In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out.
Up to what temperature can the containers be used?
For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
