Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version includes Spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
Got a stuck lid on your Fermonster? Get it open much easier with this specially designed lid opener. It easily slides onto the lid and gives you comfortable hand grips to open a stuck lid.
Note: We do not recommend using this tool to tighten the lid because the seal is made by the o-ring and not the pressure between the lid and neck.
Replacement O-ring for the Fermonster Plastic Carboy lids (all sizes use same lid).
The o-ring is a little tricky to install so please be sure to watch our video in the video tab on how to install it.
Solid replacement lid for the all sizes of Fermonster fermenter. Does not include a gasket.
Perfect for transporting wort after big brews where it was needed to drive the wort home before fermentation.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic, they're nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry, the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze
Punted bottom and conical top promote sediment collection and reduce oxidation during storage
Extra-wide 4" mouth opening simplifies filling, additions, and cleaning
Constructed from heavy-duty, virgin PET plastic without plasticizers
Made with food-grade and BPA-free materials
The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.
These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling!
Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use.
These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below.
Features:
4" wide mouth carboy - easy to clean!
Ported version inlcudes spigot for easy racking
Food grade PET plastic construction is nearly impermeable to oxygen penetration
No hard to clean dimples or ribs
Volume Markers at 5 and 6 Gallons
Punted bottom for less sediment transfer during racking
O-Ring and Lid with one hole is included (Fits #10 Stopper)
Additional O-Rings and Lids available
Weight: 1.5 lbs
Temperature Limit: 140° F
Height: 19.25 inches
Diameter: 11.25 inches
Completely taste and odor free
Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage!
Thick walls for better oxygen barrier.
Upgrade your home brewery with an innovative, Stainless Steel, 7 Gallon Brew Bucket™ Fermenter! You will enjoy many of the benefits of a stainless conical fermenter but at a fraction of the cost and you are going to love how easy it is to use! Made by Ss Brewing Technologies from polished 304 Stainless Steel, the Brew Bucket™ fermentor is not only functional it is downright beautiful. At MoreBeer! we know brewing equipment and we truly believe this is a piece of equipment you are going to enjoy using every brew day.
We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer. The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking! Etched Volume Markers on the inside were super handy when filling and display in both Liters and Gallons.
The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid. The lid includes a removable, molded silicone gasket that ensures an airtight seal. We love an airtight seal so that we can be sure to see the airlock working. The welded on stainless handles make the BrewBucket fermentor super easy to move.
Overall: Very functional, easy-to-use, will last a lifetime, and looks amazing. Lets make some beer!
Features:
Certified Food Grade 304 Stainless Steel Construction
Patent Pending Stainless Rotating Racking Valve
6.95 gal Max Capacity
40° Conical Bottom for Trub Trapping
Nests for Storage, Stacks for Ferment!
Molded Silicone Lid Gasket
Spring Loaded Lid Clamps for Airtight Lid Seal
Offset Airlock Hole includes Silicone Stopper
Gallon & Liter Markers inside for visual volume assessment
Stainless construction resists damage and is easy to clean
21” Height x 13” Width
10 lbs
Note: 1/2" Silicone fits into the lid hole for use as a blowoff. 3/8" ID tubing is perfect for racking beer from the BrewBucket's valve.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
Replacement Lid with hole for all sizes of Fermonster Plastic Carboys. The lid was recently redesigned and reinforced to be stronger and prevent cracking issues reported by customers. The design was also updated to improve how the o-ring sits in the lid.
Does not include o-ring.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
Glass carboy fermenter made from thick, high-quality, lead-free glass
Perfect for fermenting beer, wine, cider, mead, and more!
Clear glass allows you to monitor fermentation activity as it happens
Smooth neck finish compatible with carboy hood or #7 stopper
6.5-gallon size offers plenty of headspace for vigorous fermentations
If you are drawn to traditional brewing or you enjoy a simple setup, you will want to have a glass carboy for fermenting or aging your homebrew. The large 6.5 gallon size of this carboy fermenter is perfect for 5 gallon batches as there is plenty of head space to avoid blow-off during fermentation. They are made of thick, high-quality, lead-free glass which is impervious to oxygen. They do not scratch, which makes them easy to keep clean, and they're transparent so you can see what’s going on inside. This carboy will provide you with an enjoyable brewing experience for years to come.
Dimensions:
Height: 22.75"
Width: 12.5"
Your days of lugging heavy glass carboys around are over thanks to these plastic carboys! Our Plastic Carboys are made from 100% Virgin PET plastic, which is far more resistant to oxygen than regular plastic. They’re much lighter and safer than glass, which is good if you need to move your fermenter around the house to find the right temperature. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. In addition to being safer to handle, they’re more economical than glass as well. With no ribs on the sides, there’s no place for yeast and sediment to collect, making cleaning a breeze. We suggest cleaning them with an overnight PBW soak, shake, rinse, and sanitize. You’ll want to avoid vigorous scrubbing during cleaning to avoid scratches.
Two special features we love about our PET Carboys are the punted base and extra head space. The punted base makes the carboy easier to hold while carrying or pouring, and prevents sediment disturbance during transfers. The extra head space is a huge plus to make sure you have enough room for when your fermentation gets going.
Specifications:
Uses a #10 stopper or a 5 Gallon Carboy Hood.
Weighs 1.5 lbs
Rated to 140 degrees F
Height: 19.25 inches
Diameter: 11.25 inches
Completely taste and odor free
Carboys can withstand up to 15 psi of pressure with no deformation
Punted base to prevent sediment disturbances during transfer
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
Your days of lugging heavy glass carboys around are over thanks to these plastic carboys! Our Plastic Carboys are made from 100% Virgin PET plastic, which is far more resistant to oxygen than regular plastic. They’re much lighter and safer than glass, which is good if you need to move your fermenter around the house to find the right temperature. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. In addition to being safer to handle, they’re more economical than glass as well. With no ribs on the sides, there’s no place for yeast and sediment to collect, making cleaning a breeze. We suggest cleaning them with an overnight PBW soak, shake, rinse, and sanitize. You’ll want to avoid vigorous scrubbing during cleaning to avoid scratches.
Two special features we love about our PET Carboys are the punted base and extra head space. The punted base makes the carboy easier to hold while carrying or pouring, and prevents sediment disturbance during transfers. The extra head space is a huge plus to make sure you have enough room for when your fermentation gets going.
Specifications:
Uses a #10 stopper or a 5 Gallon Carboy Hood.
Weighs 1.5 lbs
Rated to 140 degrees F
Height: 19 inches
Diameter: 10.5 inches
Completely taste and odor free
Carboys can withstand up to 15 psi of pressure with no deformation
Punted base to prevent sediment disturbances during transfer
Upgrade your home brewery with an innovative, Stainless Steel, 3.5 Gallon Brew Bucket™ Fermenter! Many have asked for a smaller BrewBucket, and that has been heard. The Brew Bucket mini is perfect for 2.5 gallon batches. With features similar to the original 7 gallon Brew Bucket, the Mini is a great way to do smaller batches. Whether you are interested in splitting a 5 gallon batch for experimenting, or just brew 2.5 gallons, the BrewBucket Mini is a great choice.
Featuring a conical bottom, 304 SS construction, a rotating racking arm valve, and stackable design, these are space saving feature rich fermenters that are easy and enjoyable to use.
We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer. The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking! Etched Volume Markers on the inside were super handy when filling.
The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid. The lid includes a removable, molded silicone gasket that ensures an airtight seal. We love an airtight seal so that we can be sure to see the airlock working. The welded on stainless handles make the BrewBucket fermentor super easy to move.
Features:
304 SS Food Grade Construction
Rotating Racking Arm & Valve (Patent Pending)
3.5 Gal Max Capacity (2.5 gal Batches)
40° Conical Bottom for Trub Trapping
Nests for Storage & Stacks for Ferment!
SS lid w/ Silicone Gasketed seal
Spring Loaded Lid Clamps for Airtight Lid Seal
Offset Airlock Hole includes Silicone Stopper
Gallon Markers inside for visual volume assessment
Stainless construction resists damage and is easy to clean
8.5" Bottom Width / 11" Top Width x 16" Height
Please note: the thermowell pictured in the second photo is not included.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new 1 gallon carboy designed specifically for small batch fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid of this 1 gallon carboy allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening of this 1 gallon carboy makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Fermonster 1 Gallon Carboy Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 5 gallon size works great as a secondary fermenter and for fermenting meads/wine.
Our top recommendation for glass carboys.
Specifications:
Weight: 12.4 pounds each
Dimensions: 20.0"H x 11.0"w x 11.0"d
Country of origin: Italy
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 3-gallon size works great for splitting up batches, making mead, and topping off wine.
Our top recommendation for glass carboys.
Specifications:
Weight: 9.0 lbs
Dimensions: 17.0"H x 9.5"W x 9.5"D
Made in Italy
Your days of lugging heavy glass carboys around are over thanks to these plastic carboys! Our Plastic Carboys are made from 100% Virgin PET plastic, which is far more resistant to oxygen than regular plastic. They’re much lighter and safer than glass, which is good if you need to move your fermenter around the house to find the right temperature. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. In addition to being safer to handle, they’re more economical than glass as well. With no ribs on the sides, there’s no place for yeast and sediment to collect, making cleaning a breeze. We suggest cleaning them with an overnight PBW soak, shake, rinse, and sanitize. You’ll want to avoid vigorous scrubbing during cleaning to avoid scratches.
Two special features we love about our PET Carboys are the punted base and extra head space. The punted base makes the carboy easier to hold while carrying or pouring, and prevents sediment disturbance during transfers. The extra head space is a huge plus to make sure you have enough room for when your fermentation gets going.
Specifications:
Uses a #10 stopper or a 5 Gallon Carboy Hood.
Weighs 1.0 lbs
Rated to 140 degrees F
Height: 16 inches
Diameter: 9 inches
Completely taste and odor free
Carboys can withstand up to 15 psi of pressure with no deformation
Punted base to prevent sediment disturbances during transfer
Stainless steel valve for Sansone fusti tanks. Recommended for use with wine and other low viscosity liquids. For water dispensing, we recommend the 316 SS Fusti Tap. 1/2" BSP Made from 304 stainless steel NSF certified.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
Replacement spigots for the maintenance of your cherished wooden aging barrel.
A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.
The 8 cm spigot is approximately 3-1/8" long. The shaft tapers from 9.5 mm (3/8") at the small end, up to 12 mm (15/32") wide.
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 6 gallon size works great as a primary fermenter for beer, wine and mead.
Our line of Itailan carboy is our top recommendation for glass carboys.
Specifications:
Weight: 14.0 pounds each
Dimensions 21" x 11"
Country of origin: Italy
Premium Italian glass carboy fermenter made from thick, high-quality, lead-free glass
Uniform thickness with less internal defects than standard glass carboys
Perfect for fermenting beer, wine, cider, mead, and more!
Clear glass allows you to monitor fermentation activity as it happens
Threaded neck finish compatible with carboy hoods
6.5-gallon size offers plenty of headspace for vigorous fermentations
Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This large 6.5 gallon size carboy fermenter is perfect for 5 gallon batches as there is plenty of head space to avoid blow-off during fermentation.
This carboy has a smaller threaded neck than standard carboys, and requires a specific hood for use with racking, and fermenting.
Our line of Itailan carboy is our top recommendation for glass carboys.
Specifications:
Weight: 20.0 pounds each
Dimensions: 21.0"h x 12.5"w x 12.5"d"
Country of origin: Italy
The Brew Bucket was the first product and the origin of Ss Brewtech, and for many brewers, the Brew Bucket was their first chance to ferment in stainless steel. Nearly a decade later, Ss challenged their engineering team to pair some of the newest technologies with the original design.
Brew Bucket Pure Flow Valve
The star of the Brew Bucket 2.0 is the new Brew Bucket Pure Flow Valve. This valve uses Pure Flow technology, originally developed for the Ss line of professional brewhouses. The removable silicone membrane of the valve provides a sanitary environment where beer makes contact with nothing except silicone. Additionally, they have molded the racking arm geometry into the valve’s silicone diaphragm to provide a seamless flow path for beer when transferring from the Brew Bucket 2.0.
Sanitary Connection
The valve attaches to the Brew Bucket using a welded external garden hose thread fitting that allows for a compact, easy-to-use connection without the need to fumble with additional clamps and gaskets. The threads are located externally and sealed by the gaskets built into the Pure Flow silicone, keeping them clean and sanitary. With the new valve design, the brewer can fully rotate the racking arm 360 degrees for maximum control while racking a finished beer.
Conical Base
The Brew Bucket 2.0 continues what made the original a great solution for home brewers. The pro-inspired conical base helps minimize trub interaction with fermented beer, thus limiting any concerns of off flavors produced during maturation. Combined with the rotatable racking arm, brewers can effortlessly rack off clean beer like the pros do in craft breweries.
Full Width Lid
The Brew Bucket 2.0 features the same full-width removable lid as the original, with a wide access opening that makes cleaning and sanitizing a breeze. Finally, the included thermowell has been repositioned to the lid, and the increased length allows for accurate readings, even when brewing partial batches.
Features
Pro-Inspired Conical base
Blow off port in lid for airlocks or blow off tubing
Rotatable Silicone Racking Arm
Pure Flow Valve for transfers and gravity samples
304 Stainless Steel
7 gallon capacity
300m Thermowell
Thermometer | LCD Temp Display Module Dual Temp
Wide lid with secure spring clamps
Etched volume markings gals/liters
Welded carry handles
Surface safe Silicone Feet
Specs:
Tank Size: 7 gal
Batch Size: 5 gal
Dimensions: 24" H x 13" W x 13" D
Weight: 11 lbs
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
Stainless steel valve for Sansone Water Dispenser.
The 316 SS Fusti Tap offers higher corrosion resistance than the 304 SS Fusti Tap.
1/2" BSP
Made from 316 stainless steel
NSF certified
Replacement spigots for the maintenance of your cherished wooden aging barrel.
A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden handle and spout, and a plastic valve insert. Spigots are sold individually, with no packaging.
The #4 spigot is approximately 8-3/4" long and 27 mm (1 1/16") at the small end.
Replacement spigots for the maintenance of your cherished wooden aging barrel.
A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.
The #0 spigot is approximately 5-1/2" long. The shaft tapers from 16 mm (11/16") at the small end, up to 24 mm (15/32") wide.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Ported Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom for less sediment transfer during racking O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
Smooth, ribless design prevents yeast and bacteria buildup, making sanitation a breeze Punted bottom and conical top promote sediment collection and reduce oxidation during storage Extra-wide 4" mouth opening simplifies filling, additions, and cleaning Constructed from heavy-duty, virgin PET plastic without plasticizers Made with food-grade and BPA-free materials The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
Replacement spigots for the maintenance of your cherished wooden aging barrel.
A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.
The #6 spigot is approximately 10-1/4" long and 34 mm (1-11/32") at the small end.
Replacement spigots for the maintenance of your cherished wooden aging barrel.
A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.
The #1 spigot is approximately 6 5/16" long and 18 mm (23/32") at the small end.
Replacement spigots for the maintenance of your cherished wooden aging barrel.
A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.
The #2 spigot is approximately 7-5/64" long and 24 mm (61/64") at the small end.
Replacement spigots for the maintenance of your cherished wooden aging barrel.
A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.
The #3 spigot is approximately 8" long. The shaft tapers from 24 mm (15/16") at the small end, up to 32 mm (1-1/4") wide.
Replacement spigots for the maintenance of your cherished wooden aging barrel.
A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.
The #5 spigot is approximately 9-7/16" long and 32 mm (1-1/4") at the small end.
5 Liter dark green jug. Includes a finger grip molded into the bottle. Sold individually.
This jug is an ideal option for small batch fermentations. Pair with 19.5mm x 28.5mm silicone stopper (FE523) to install an airlock.
Please Note: The thread style is A3380, 31.5mm ROPP finish. This is a specialty screwcap that we do not stock, as it is intended for use as a fermenter.
Elevated Pouring: Raises your Fusti to provide ample clearance for bottles and glasses, eliminating the need for awkward counter-edge placement.
Universal Compatibility: Engineered for a perfect, stable fit with all Sansone 10L, 15L, and 20L models.
Durable Italian Design: Crafted in Italy from high-quality, corrosion-resistant stainless steel for a professional and easy-to-clean finish.
This Sansone Stainless Steel Stand provides the necessary clearance to easily dispense liquids from your 10L, 15L, or 20L Fusti. By elevating the container, it allows you to place glasses or bottles directly under the spigot, eliminating the need to position the Fusti at the edge of a counter or on an improvised riser. Crafted in Italy from high-quality, corrosion-resistant stainless steel, this stand offers a stable base that matches the professional finish of your Sansone equipment.
Why You Need It:
Universal Fit: Specially designed to securely hold Sansone 10L, 15L, and 20L Fusti models.
Italian Quality: Made in Italy with a polished finish that looks great in any kitchen or tasting room.
Rock-Solid Stability: Engineered to handle the weight of a full container without wobbling or flexing.
Hygienic & Easy to Clean: 100% stainless steel construction means no rust, no staining, and a quick wipe-down is all it takes to keep it looking new.
These amazing new EcoVessel triple insulated growlers have the best insulation properties on the market. Able to hold cold temperatures for 36 hours and hot temperatures for 8 Hours, this vessel was tested and outperformed every other growlers insulation. We chose to stock EcoVessel products due to their superior insulation, sleak styling and superior quality.
EcoVessel growlers include a built in strainer and a two piece lid. The strainer allows you to infuse your beverage with any desired flavor; from tea to ice to flavoring water with cucumbers, lime, fruit, etc. to dry hopping in vessel, the strainer adds functionallity to this spectacular product. The two piece lid gives you the flexibility of a wide mouth for direct flavoring additions, easy filling and cleaning or the narrow mouth for consumption. Both pieces are screw style.
EcoVessel products are perfect for any and every beverage!
Bring THE BOSS along on your day off…or your next adventure!
Fill this reusable stainless steel growler with icy cold craft beer at the brewery or fresh hot coffee from home or your local coffee house. We’ve included a removable stainless steel infuser, so you have the option of adding the flavors of fresh fruit to your drinks. If you’re a tea enthusiast, fill the infuser with leaves and the Boss will be your favorite tea maker. On a summer day or warm evening, pour some wine in the growler, add sliced of oranges, limes, pineapple and enjoy refreshingly chilled sangria that will stay cold all day - perfect to take on a picnic or day at the beach!
This growler features our vacuum TriMax® triple insulation technology and has been tested to keep liquids cold for 36 hours and hot up to 8 hours. Its dual use leak proof top has a wide opening for easy filling and a small opening for easy drinking. A versatile vessel for anything, anytime, anyplace and now available with interchangeable tops!
TriMax Triple Insulation Technology
Keeps COLD 36 hours, HOT up to 8
18/8 premium stainless steel
No BPA, no phthalates, no liners
Dual use top – interchangeable with flip spout lid - wide opening for easy filling, small opening for easy drinking
Removable infuser for fruit, tea, herbs
Sturdy carrying strap
Never sweats
Hand wash
Recyclable
64 fl. oz./1.9 L
Dimensions: 5 x 5 x 11.5
We create premium hydration vessels and food containers that maintain the optimal temperature while reducing dependence on single use plastics. Product ideas and inspiration come from our dedicated staff and our loyal customer base.
EcoVessel is based in Boulder, Colorado at the base of the Rocky Mountains. Jon Fox started EcoVessel in 2009 in response to the safety and environmental concerns that arose from the use of plastic water bottles. After realizing the lack of quality reusable bottle options available for him and his family, EcoVessel was formed. Innovation and creativity have been part of our DNA since the beginning and our signature TriMax™ triple insulated hydration vessels have been independently tested to outperform our competitors.
Our vessels and food containers are made of high quality, non-leaching materials and are designed for style, performance, and convenience. You can find our products in over 20 countries and on every continent (does Antarctica really count?)
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Elevated Pouring: Raises your Fusti to provide ample clearance for bottles and glasses, eliminating the need for awkward counter-edge placement.
Heavy-Duty Stability: Custom-engineered to provide a secure, stable base specifically for the dimensions and weight of a full 25L Fusti.
Durable Italian Design: Crafted in Italy from high-quality, corrosion-resistant stainless steel for a professional and easy-to-clean finish.
The Sansone Stainless Steel Stand for the 25L Fusti provides the necessary elevation to dispense liquids efficiently into bottles or glasses. By elevating the container, it allows you to place glasses or bottles directly under the spigot, eliminating the need to position the Fusti at the edge of a counter or on an improvised riser. Crafted in Italy from high-quality, corrosion-resistant stainless steel, this stand offers a stable base that matches the professional finish of your Sansone equipment.
Why You Need It:
Custom Fit: Specifically designed to support the dimensions of the Sansone 25L Fusti.
Italian Quality: Made in Italy with a polished finish that looks great in any kitchen or tasting room.
High-Capacity Stability: Engineered to securely handle the significant weight of a full 25L container.
Hygienic & Easy to Clean: 100% stainless steel construction means no rust, no staining, and a quick wipe-down is all it takes to keep it looking new.
Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Conical-shaped complete drainage bottom for maximum product yield and easy cleaning Made from 304 stainless steel with ultra-high-quality laser welds Made in Germany by Speidel We are is proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Note: These stock tanks are outfitted with two male threaded fittings which will accept either a Speidel Sample Valve or a Thermowell. One fitting will come capped and the other will come equipped with a thermometer. Speidel Quality Features: Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted for use with 1.5in TC. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Rubber Lid Gaskets - Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 630mm D x 1384mm H (24.8" D x 54.48" H) (Lip Ø is 26.378" ) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
High-quality stainless steel fermentation and storage tank
Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress
Impeccable 2R (IIId) surface finish for easy cleaning
A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid
Made in Germany by Speidel
This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids. These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary. These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life.
Features:
304 SS construction
IIId surface finish - easy cleanup
60 l (15.9 gal) volume
Gasketed sealed tanks - no oxygen permeation during storage
69.2 cm (27.2") Height x 35 cm (13.8") Ø
German quality construction with 25 year warranty
Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting
Outlet Port: Internal thread of 3/4" (BSP)
Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications
Floating lid can be positioned as needed to match the volume of the liquid you're working with
Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine
Cooling jacket covers the entire tank of efficient glycol cooling
Swinging manway door for easy removal of grape skins
Made in Germany by Speidel
We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage.
Speidel Quality Features:
Cooling Jacket - This tank is equipped with a max coverage jacket that covers all accessible areas of the tank and is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control!
Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!
Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.
Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume.
Manway - The "red wine" manway allows you to easily remove skins.
Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.
Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted for use with 1.5in TC. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.
Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!
Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise.
Tank Features:
Volume: 675 L Sealed
Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket
Manway
Max Coverage Jacket: 1.1 m² (4x 1" MPT connections)
Complete Drainage Dish Bottom
Sight Gauge
Reinforced Racking valve
1.5" TC connections
Thermometer and Thermowell Combo included
Sample Valve included
Tank Dimensions: 900mm D x 1620mm H (35.4" D x 63.7" H)
Please Note: This picture does not cover the complete feature set, and shows a lifting arm which is not included on the 675 l tank.
Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
High-quality stainless steel fermentation and storage tank
Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress
Impeccable 2R (IIId) surface finish for easy cleaning
A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid
Made in Germany by Speidel
This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids. These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary. These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life.
Great for storage of wine, cider, juice, kombucha, or whatever else you may be making in 12 gallon batches!
Features:
304 SS construction
IIId surface finish - easy cleanup
45 l (11.8 gal) volume
Gasketed sealed tanks - no oxygen permeation during storage
55 cm (21.7") Height x 35 cm (13.8") Ø
German quality construction with 25 year warranty
Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting
Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are is proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT512). Speidel Quality Features: Rubber Lid Gaskets - Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 630mm D x 999mm H (24.8" D x 39.3" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
