SalesHold

Updated With: 240V/120V Adapter Cable Water Deflecting Screen Improved Grain Basket with 1.5" Sidewall Perforations The ANVIL Foundry™ is the most versatile all-in-one brewing system available. From the triple element low watt density patented dual voltage heaters for blazing fast heating speeds, to the unique high flow grain basket, you won’t find a more powerful feature-rich product. Key Features: Patented Dual Voltage Switchable Between 120V 1600W, 13A and 240V 2800W, 12A for Faster Heating & Better Boils. (240V Standard) 240V/120V Adapter Cable - With this adapter you navigate to 240V for a faster brew day, or brew at the standard electric 120V by simply flipping the switch located on the back of the unit.The only all-in-one on that’s 240/120v Water Deflecting Screen - The improved screen mount feature has an added gasket with internal water deflecting geometry on the inside to ensure water doesn’t reach the screen.  Serviceable Touch Screen with 4x the Mounting Screws - Servicing the linear digital power control screen was a daunting process, now it’s as simple as removing 4 screws and pulling a single wire cable out of the screen.  After swapping the screen, you can plug the unit back in. Grain Basket Hosts 1.5” of Side Wall Perforations - They aren’t just back, they are improved!  The grain basket’s side wall perforations drastically reduce the amount of stuck mashes from happening. Large Capacity Increases Efficiency and Grain Capacity. Double Wall Insulation Maintains Mash Temps and Increases Heating Speeds. Ultra Low Watt Density, Triple Element Heaters - Won't Scorch. Linear Digital Power Control and Solid-State Switching for Fine Tuning your Boil. Turbo 500 Distillation Ready. Includes High Capacity Stainless Immersion Chiller with Hoses & Fittings. External Pump Won't Plug and is Easy to Clean. No Need to Disassemble Entire Unit! Use for Other Pumping Needs too. Three Sizes Available: 18 Gallon for 10 gallon batches, 10.5 Gallon for 5 Gallon Batches and 6.5 Gallon for 2.5-3 Gallon Batches. Specs: Max Grain Capacity - 16 lbs Tank Diameter = 12.5 inches Distance Across the Handles = 17 inches Height of Base Unit = 29.75 inches Lid = 3.25 inches Total Height = 33 inches Spigot Height from Base = 7 inches Shipping Weight = 38 lbs Wattage 120V = 1600 watts 240V = 2800 watts Caution! Do not CLAMP the lid in place while boiling. The steam buildup can lead to severe burns.  The lid should only be clamped when used for distillation. Read all instructions and practice safe brewing.

Read more less

The Blichmann Engineering™ Spunding Valve is purpose-built for pressure fermentation. With exacting precision, you’ll turn out lager-like beer at ale temperatures in no time! Pressurized fermentation is a great option for creating lager-like flavor profiles at room temperature, without the hassle of temperature control. And you’ll complete your fermentations faster and easier. The Blichmann Engineering™ Spunding Valve is purpose built for homebrewers to control your pressures with exacting precision. Research by Blichmann Engineering™ and White Labs shows significant reduction of esters (fruity flavors found in most ales) and low levels of diacetyl, by fermenting under pressure. Key Features: Ferment under pressure to produce clean, low ester, lager-like beers Extremely fine adjustments from 0 to 35 psi, and superb pressure stability Suitable for vessels up to 42 gal (1BBL batch size) Perfect for naturally carbonating your beers Use for counter-pressure transfers Offered in ½” NPT and Tri-clamp models for the ultimate in adaptability Integral blow-off barb fitting adds a visual indication of fermentation if desired Tri-Clamp model is ideal for most pressure fermentors with T.C. fittings Also available in NPT model (BL151)

Read more less

Anvil Foundry Recirculation Pump Kit for 6.5 / 10.5 gal units.   Features: Anvil Recirculation Pump 4 ft. of Silicone Hose 4 Hose Clamps Flow Clamp Stainless Return Tube Perforated Disc Eye Bolt & Nuts for Eye Bolt

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   Easily attach to the Grainfather Conical Fermenter, for a clean and simple way to transfer your beer without the need to lift the fermenter to perform a gravity fed transfer. This also ensures less chance of oxygen entering the beer during transfer.  All you need is a C02 bottle and a regulator to attach to the Pressure Transfer and you can transfer your beer into a keg or bottles through the Conical Fermenter Dual Valve Tap or via the top of the fermenter lid using the Beer Racking Pipe. Specs: High quality 304 stainless steel components Accurate digital pressure gauge Needle valve for precise control of pressure   Please note: Batteries are not included for the Pressure Gauge. 2 x AAA batteries are needed.     

Read more less

Looking to ferment like the Pro’s? The new ANVIL Crucible™ Conical Fermentor is the hands-down best value in a stainless steel conical fermentor on the market. The rotating racking arm and large pro-style tri-clamp bottom dump will have you racking crystal clear beer and harvesting yeast like a pro! Let the Crucible™ be the showpiece of YOUR brewery!   Available in 7 gal and 14 gal sizes, perfect for 5 and 10 gal finished batch sizes Rotating racking arm is ideal for transferring clear beer, leaving the yeast and sediment behind Pro-style welded 1.5” tri-clamp bottom dump makes dumping sediment and harvesting yeast a snap Embossed level markings (gal and L) will never wear off Sturdy carry handles makes moving your beer safe and easy Protective caps on the legs protects floors and counters Includes liquid crystal thermometer, airlock and stopper Optional cooling systems maintains perfect fermentation temps Optional yeast harvesting kit is perfect for reusing your yeast and saving money! Leg extensions lift the unit high enough to gravity drain into kegs   Specs: Height – 30.5" to top of lid (Add 6.25" for airlock and stopper) Width - 16.5" handle to handle Depth – 12.25” Depth Note: the Crucible is not pressure capable.    

Read more less

The ANVIL Foundry™ is the most versatile all-in-one brewing system available. From the triple element low watt density dual voltage heaters for blazing fast heating speeds, to the unique high flow grain basket, you won't find a more powerful feature rich product. These systems will ship free to anywhere in the contiguous United States. Key Features: 240V Operation 6-20P plug 4000W 17A for Faster Heating & Better Boils. Cleaning is a breeze with the Patented Removable False bottom. Grain Capacity - 36 Pounds Double Wall Insulation Maintains Mash Temps and Increases Heating Speeds. Linear Digital Power Control and Solid-State Switching for Fine-Tuning your Boil. Turbo 500 Distillation Ready. Includes High Capacity Stainless Immersion Chiller with Hoses & Fittings. External Pump Won't Plug and is Easy to Clean. No Need to Disassemble Entire Unit! Use for Other Pumping Needs too. Three Sizes Available: 18 Gallon for 10 gallon batches, 10.5 Gallon for 5 Gallon Batches and 6.5 Gallon for 2.5-3 Gallon Batches. Minimum batch size: 5 gallons Optional Recirculation Pump Kit Optional Swirly™ Whirlpool Wattage - 6-20P 240V = 4000 watts Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.   Caution! Do not CLAMP the lid in place while boiling. The steam buildup can lead to severe burns.  The lid should only be clamped when used for distillation. Read all instructions and practice safe brewing.  

Read more less

Anvil Brewing Equipment’s Kettle Strainer is just what you've been waiting for.  The durable stainless construction works hard to efficiently filter hops and trub. Features: Proprietary filtration screen efficiently filters hops and trub Plug resistant Attaches directly to ANVIL™ Kettles and 1/2" Diptubes Easily Cleaned Durable stainless construction Patent pending design

Read more less

Using an electric Recirculation Infusion Mash System heater to heat your mash is one of the safest and most energy-efficient ways to get your brew to the perfect temperature, and the Blichmann RIMS-Rocket is one of the most popular models on the market today. This innovative heater is designed especially for use with the popular Blichmann HopRocket™ canister, and to install it all you have to do is secure it inside of the canister, plug it in, and monitor the temperature. The RIMS-Rocket operates with 3500 W, 240V and ultra low watt density in order to perform optimally in your RIMS system. It features a "plug and play" 12-foot long factory wired cable with a molded twist-lock L6-30P plug on one end and a removable plug on the other end, making it easy to clean because there are no dangling cords attached to the side of your heater. Best of all, the ultra low watt density ensures that you’ll never scorch your mash during the heating process! Features: The RIMS-Rockettm heating element is 3500 W, 240V, ultra low watt density and is engineered to perform optimally in your RIMS system Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your heater and the terminal pins are spray-down capable! The RIMS-Rockettm includes a "plug and play" 12ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. Less than Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!) Please note: mounting bracket sold separately.

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   Large 11 gallon preboil capacity Powerful 3,300 watt heating element Color LCD controller magnetically mounted for easy removal and cleaning Wireless control via the Grainfather Community App Dual stage false bottom to prevent stuck sparges Wort chiller included The Grainfather G40 brewing system has a bigger capacity and better connectivity. Produce up to 40L (11 US Gal) of beer from one brew and connect your mobile device to the smart controller with built-in wireless control via the Grainfather App, for step-by-step brewing and access to bazillions of recipes. The Grainfather G40 is the latest brewing system in the G Series range from Grainfather. Packed with all of the innovative features you can find in the G70, this brewing system is your new best friend for brews up to 11 gal (40L), perfect to fill two 5 gal corny kegs. With a max grain bill of 29 lb., you can choose to add extra grain and less liquid to make beer with an ABV over 9%.   Manage your brew remotely with step-by-step brewing with the smart wireless controller. All you need to do is connect your mobile device to the controller and control your brew through the FREE Grainfather app where you have access to bazillions of recipes to choose from, or create your own!   Please Note - this system comes standard with a NEMA 6-15P plug, and requires access to a 220v-240v power supply.   Features: G40 body built with sleek 304-grade stainless steel Large, surface mounted heated elements heat wort evenly Connect your mobile device to the smart wireless controller via the Grainfather App (link to the Grainfather app page) and manage your brew remotely. The Grainfather app gives you access to brewing tools and calculators to brew with confidence, and bazillions of recipes to choose from or create your own. Reach your expected gravity with a conical base for maximum wort transfer Comes with a counterflow wort chiller for a more efficient and sanitary brew transfer PID heating control for accurate temperature management during mashing Quick and easy cleaning with CIP (clean in place) capability An integrated sight glass for easy volume reading Rolled edge mash plate and large hop filter to reduce blockages What's Included: Grainfather G40 Smart controller with built-in wireless connectivity Counterflow wort chiller Glass lid Lifting bar Inner basket Recirculation hose Grain plate Hop filter Fittings Specs: Size: 26" x 21" Weight: 64lb Capacity: 12 gal Batch volume Maximum: 11 gal (40L) Minimum: 3 gal (10L) Grain bill Maximum: 29 lb (13kg)* Minimum: 7 lb (3kg) *Max weight depends on grain crush, type, and variety. Large grain bills may also require the use of an additional grain plate." Power: 3300W, 240V Connectivity: Wireless control  

Read more less

This 15" whirlpool works perfectly with the 6.5 Gallon Foundry™, brew kettles, and any other brewing system. The rotating rubber piece allows it to secure to the side of any vessel, no matter the thickness. The Swirly™ uses a 1/2" Straight Pipe Thread for hose connections and includes a hose barb for connecting your water supply. Patent pending.   The 15" Swirly fits any vessel that is 11"-21" in container height.

Read more less

Degas your wine completely and efficiently with the WineEasy Degassing Kit from Blichmann Engineering! The WineEasy™ Degassing Kit is a vacuum degassing kit from Blichmann Engineering™. No more messing with cumbersome, inefficient stir-type degassers that leave CO2 in solution and cause a mess. With the WineEasy™ Degassing Kit, professionally degassing your wine is as easy as flipping a switch! A vacuum is placed on wine in a carboy through a special stopper, drawing all carbon dioxide out of solution, leaving your wines still and delicious! Degassing usually takes about 30 minutes, depending on the temperature of your wine. We recommend getting your wine up between 75-80 degrees for fastest results. This is the perfect degassing solution for all winemakers!   NOTE: This product can be used by anyone on any wine for degassing. For those with a WineEasy™ Fermentor and Piston, the Vacuum Press Kit for WineEasy™ is recommended for full use with the WineEasy™ system.   The Degassing Kit comes with the following components: Vacuum pump 5 ft piece of 1/4" OD hard plastic vacuum tube 1/4" X 6" stainless steel vacuum tube #7 two-hole silicone stopper #00 solid tan rubber stopper (used to plug the racking tube hole for degassing) Check valve assembly and with spare check ball and check ball seat

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible. Versatile Distilling System: Easily converts the Create+ Boiler 25 L or Grainfather G30 into an alembic system, allowing you to craft high-quality distilled water, hydrosols, and a variety of spirits. Flavor-Enhancing Condenser: Unlike a reflux condenser, the alembic condenser is designed to retain and enhance the flavors and aromas of your wash, perfect for creating rich, characterful spirits like whiskey, rum, and gin. Customizable Setup: Features a 2" tri-clamp connection for easy integration with other accessories, enabling you to experiment with different setups and attachments for a truly unique distilling experience. Craft high quality distilled water, hydrosols, and flavorsome spirits by transforming the Create+ Boiler 25 L or Grainfather G30 into an alembic distilling system by adding the Create+ Alembic Copper Dome and condenser.* Unlike a reflux condenser, the Alembic Condenser retains and enhances the flavors and aromas from a wash, making it ideal for crafting spirits like whiskey, bourbon, rum, and gin. The Alembic Copper Condenser features a 2" tri-clamp connection allowing for it to be connected to 2" tri-clamp accessories, giving you the option to experiment with different setups and attachments for a truly bespoke experience. The Alembic Condenser is also compatible with the Grainfather Alembic Condenser Attachment Kit and Distilling Lid*, it can convert a G40 or G70 into a Pot Still, making it suitable for distilling larger batches of all-grain spirits. *Create+ Alembic Copper Dome, Create+ Boiler 25 L, Grainfather G30, and Grainfather Distilling Lid and Attachment Kit sold separately.  DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities.  Key Features For intermediate-advanced distilling Made from Copper Designed in New Zealand Connects to 2" tri-clamp distilling accessories Suitable for distilling water, hydrosols, and flavorful spirits Kitchen, laundry and garden tap adapters for ease of cooling water connection Specifications Ease of Use: Intermediate to advanced Average water use during distillation: You will use approx. 150 L (39 US Gal) per hour.* Approx Yield: 3.5-7 L (0.9-1.8 US Gal) of 40% ABV alcohol* Purity: Distills at up to 70% ABV (140 US proof)* *Per 25 L (6.6 US Gal) wash (varies based on wash ingredients/volume) using the Create+ Boiler 25 L and Create+ Alembic Copper Dome. Included in Box Create+ Alembic Copper Condenser Create+ 2" Tri-Clamp (includes silicone gasket) Digital Thermometer with mounting bracket 2 x Cooling Water Tubes Silicone Distillate Tube Kitchen, Garden and Laundry Tap Adapters Instructions  

Read more less

The Gene Cafe CBR 101 has a sleek design and roasts up to 10 ounces of green coffee at a time.  This is a rotating drum style roaster and produces a very consistent roast level. You have control over termperature and time with the twist of two knobs - simple and effective. Digital read out gives actual temp. DROP SHIP ITEM. Takes 1-2 weeks for delivery The glass roasting chamber give easy visible as the roast progresses through different stages.  WIth great control, quiet operation and consistent batches the Gene Cafe Coffee Roaster is a great choice! Features Twisting vortex drum movement with pyrex glass Cooling cyle of 10 minutes 374 to 482F temperature range Indirect hot air agitation 1300 Watt heating element 65db noise level much quieter than other roasters 19" x 10" x 9" Cooling cycle by-pass if you want to use your own cooling system    

Read more less

Using the WineEasy™ combined fermentor and press is admittedly different than anything on the market, but is incredibly easy to use and provides results and ease of use that traditional fermenting and pressing techniques simply can't offer. At the heart of the system is a high quality stainless primary fermentor (20, 30 and 55 gal sizes). A uniquely designed false bottom located at the bottom of the fermentor allows the pomace to be separated from the wine while draining the unit. The tines on the pressure plate support the bottom of the fermentor and perforated false bottom and keep it from collapsing from the pressure imparted by the vacuum pump. After alcoholic fermentation, the free run is drained or pumped out of the fermentor. The sliding piston assembly is then installed. The vacuum pump evacuates the carboy (or other vacuum capable vessel) and applies a vacuum under the false bottom of the WineEasy fermentor. This causes atmospheric pressure to push down on the sliding piston pressing the pomace to the ideal maximum pressure of 14 PSI to avoid hard press conditions. Since this is all done without transferring the pomace to a press, and is done so in a completely closed and air tight system, oxidation and contamination are virtually eliminated. Cleanup is as easy as scooping out the dry pomace into a container and washing out the high polish stainless steel fermentor! Features: No messy transfers to a secondary fermentor Less risk of contamination and oxidation Great press efficiency Fast Easy to use Simple mess-free cleanup Produce consistently superb wines   Please Note: This 55 gallon Wine Easy requires at least 18.15 gallons of must to press effectively.  

Read more less

The Pro Pilot System is a true turnkey brewhouse including virtually everything YOU need to get up and running FAST! Perfect for taprooms, pilot systems and neighborhood breweries. No fuss, no hassle, just pure pro brewing power! These systems will ship via freight with lift gate to anywhere in the contiguous United States. There is a $500 flate rate fee for shipping from the manufacturer which is already priced into the cost of the system. 3 - BoilerMaker™ Kettles Made in America. Single piece construction from US made stainless steel. Heavy gauge 304 stainless steel. Linear Flow Valve disassembles in seconds for cleaning, allows precise control of flow, and orients in any direction. Rivet free handles, rugged cool touch grips, oriented for easy carrying. Borosilicate glass level gauge. Diptube with rotating racking arm. Lifetime limited warranty on kettles. Accessories Patented button louver false bottom. AutoSparge™ automatically sets the hot liquor flow rate and liquid level in your mash tun.  Adjustable viewing angle thermometer. Whirlpool fitting in boil kettle.   2 - 240V BoilCoils™ Less than 30 W/in² nearly half of the typical ultra low watt density for easier cleaning and scorch free brewdays. Each BoilCoil™ is engineered to preform optimally in your BoilerMaker™ G2 brew kettle for consistent heating performance, boil quality, and boil-off rates. Robust stainless steel construction. Less than ultra low watt density means NO chance of scorching when used as directed. The 240v BoilCoil™ includes a 12 ft factory wired cable with a molded twist lock L6-30P plug. Removable custom engineered plug means cleaning is a snap.   2 - RipTide™ Brewing Pump Ultra quiet motor. Tri-Clamp disassembly for easy cleaning. Integral linear flow control valve.   2 - Tower of Power Temperature Controllers PID Temperature control. On/off/auto mode selector switches. Class A precision RTD temperature sensor. Controllers are table mounted for convenience. Compact enclosure. Brushed stainless cover and gloss black powder coated case that will look beautiful for years.   Heavy Duty Custom Table 14 ga 304 stainless steel. Apron to mount accessories. Legs and lower shelf are stainless. Built-in receptacle boxes. Heavy duty casters for mobility. Adjustable height lower storage shelf. Made in USA.  

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible. Superior Spirit Quality: The copper construction and domed shape of the Alembic Copper Dome captures and enhances the flavors and aromas from a wash, while stripping away unwanted compounds and off-flavors to create smooth, high-quality spirits. Versatile Distilling: Transform your Create+ Boiler 25 L or Grainfather G30 into a distilling system for crafting whiskey, bourbon, gin, rum, and more. Adaptable Design: The included 2" tri-clamp to DN40 Threaded Adapter provides flexibility for connecting to various attachments and setups, allowing you to experiment with your distilling process. Easy to Use: Seamlessly integrates with the Create+ Alembic Condenser, making it simple to upgrade your current brewing system. Craft high quality distilled water, hydrosols, and flavorsome spirits by transforming the Create+ Boiler 25 L or Grainfather G30 into an alembic distilling system by adding the Create+ Alembic Copper Dome and condenser.* Due to its copper construction and domed shape, when paired with the Alembic Condenser the Alembic Copper Dome captures and enhances the flavors and aromas from a wash, making it ideal for crafting spirits like whiskey, bourbon, rum, and gin. It is able to strip away unwanted compounds and off-flavors, improving distillate quality. The Alembic Copper Dome comes with a 2" tri-clamp to DN40 Threaded Adapter allowing for it to be connected to 2" tri-clamp accessories, giving you the option to experiment with different setups and attachments for a truly bespoke experience. This adapter can be removed from the dome for use with older model threaded Still Spirits condensers. *Create+ Alembic Copper Condenser, Create+ Boiler 25 L, and Grainfather G30 sold separately. DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities. Key Features For intermediate-advanced distilling Made from Copper Designed in New Zealand Connects to 2" tri-clamp distilling accessories Suitable for distilling water, hydrosols, and flavourful spirits Warranty Period: 3 Years Specifications Ease of Use: Intermediate to advanced Average water use during distillation: You will use approx. 150 L (39 US Gal) per hour.* Approx Yield: 3.5-7 L (0.9-1.8 US Gal) of 40% ABV alcohol* Purity: Distills at up to 70% ABV (140 US proof)* *Per 25 L (6.6 US Gal) wash (varies based on wash ingredients/volume) using the Create+ Boiler 25 L and Create+ Alembic Condenser.   Included in Box Create+ Alembic Copper Dome 2" Tri-Clamp to DN40 Threaded Adapter (includes silicone gasket and DN40 Nut) Instructions

Read more less