When we have received a return back which can no longer sell as new, we post it here.
The product gets discounted and will DRIP in price daily until it is sold. You can wait for it to get to a lower price, but once it's sold, it's gone.
See each product for information regarding the daily DRIP rate, condition, and photos of any issues.
The ultimate control & precision of your fermentation process. Equipped with four built-in temperature controllers and pumps, this advanced chiller enables you to independently regulate the temperature of multiple separate fermentation vessels simultaneously, ensuring optimal conditions for different batches or styles of beer, making it a game-changer for homebrewers. 4 Built-in pumps and digital controllers Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 4 is designed to cool fermentations in small vessels. It features 4 built-in submersible pumps with independent digital temperature controllers and can be used with any vessel that has a glycol jacket or submersed cooling coil/rod. Each controller includes a temperature probe that should be inserted into a thermowell in your vessel or can be taped to the outside of the vessel if you don't have a thermowell. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool to your desired set temperature. Up to four tanks can be controlled separately with one IceMaster Max 4. Compatibility The IceMaster can be used with any fermenter that has a built-in cooling jacket, added CoolStix, or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - we recommend one Insulated Tubing Kit for each tank. These kits feature "dry break" quick disconnects that prevent glycol loss and the insulated tubing will increase chilling efficiency and eliminate line sweating from condensation. CoolStix - CoolStix can be added to a wide range of carboys, fermenters, and tanks and the IceMaster works really well in combination. Each CoolStix is available with or without a pump kit; for use with the IceMaster Max 4 you will only need the CoolStix and some tubing to connect it to the chiller. Ss Brewtech Fermenters and Brites - Ss BME Chronicals, BME Brites, and Unitanks come with cooling coils and neoprene as standard. The optional chilling FTSs will not be needed for use with the Max 4. The cooling coil for standard Ss Chronicals and Brew Buckets are not sold a la carte and must be purchased with a submersible pump, which is not needed for the Max 4. For standard Chronicals and Brew Buckets you might consider the IceMaster 100 for cost savings. Spike Conical with Optional Cooling Coil - the cooling coil for Spike CF series conicals is available for purchase independently from the TC-100 cooling system. For use with the Max 4 you will only need the coil and some tubing to connect it to the chiller. Speidel Tanks with Optional Cooling Jackets - You will need two lengths of tubing to connect the chiller to each tank. Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need two lengths of tubing for each fermenter. Blichmann Fermenators with Optional Cooling Coil - You will need two lengths of tubing for each Fermenator. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, if the tank is insulated, and what the ambient temperature is. Cold crashing always requires the most energy and requires tank insulation. We have experimented with capacities and can provide this general guide based on a 75°F ambient and neoprene insulation. Neoprene provides a modest amount of insulation so you would obtain better results using Armaflex or a higher R rated insulation. Capacity calculated at cold crashing to a target temperature of 38°F while the ambient temperature is 75°F with neoprene insulation (double tank capacity for ale fermentation temperature control): 2 - 1BBL (31 Gallon) Jacketed Tank 2 - 1/2BBL (15-20 Gallon) Tanks 3 - 10-14 Gallon Tanks 4 - 5-7 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. Length 1: Barb of 1st bulkhead (IN) to cooling system outlet Length 2: Barb of 2nd bulkhead (OUT) to cooling system inlet Specifications: 4 built-in submersible pumps with independent digital controllers Pump controllers read in °F/°C Temperature controller reads in °C Labeled IN and OUT stainless bulkheads with 3/8" OD barbs Tank Capacity: 30L/8 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 780 Watt/2600btu/0.26 ton Refrigerant: R134a Voltage: 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Max Head: 21.3 ft (6.5 m) Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.
$1,199.99 $1,000.76
Brewtools pro steam hats are designed for maximum flexibility. They feature a silicone edge seal, 4 clamps to hold it in place on your brewing system, a 110mm inspection hole you can add your hops through when boiling, 2 silicone covered handles and a 4 inch accessory mount on top. The silicone plug for the inspection hole is included. Remember to order clamp and gasket for the top port. For User Manuals and support, please follow this link to Brewtools Docs.
$271.00 $225.33
This cast iron wide-profile banjo burner is strong and efficient, topping our ratings in getting wort to a quick boil, while using the same amount or less of propane. Adjusted for efficiency this banjo burner produces around 70,000 BTU/hr, and in full, this banjo burner mode produces 100,000 btu. Banjo burners can often times have issues when using with low flame output. We sourced and tested a number of different units, before settling on this one, which performs great at low output. Uses 3/8" male flare fitting (included). Comes with steel orifice plate for regulating airflow The burner has a 9 7/8" diameter and is 14 3/4" long This banjo burner requires a propane regulator to function properly. We recommend a Wind Guard with these units if brewing outdoors. If using indoors, you must have proper ventilation in the form of an overhead cooking hood.
$87.99 $73.09
The KOMOS Cobra draft tower has a beautiful polished finish and features a built-in glycol loop for chilling. These towers are a gorgeous option for your tap room or home bar. The signature condensation on a glycol chilled draft tower will surely have your patrons thirsting for a pint! Of course, using the glycol loop is optional and isn't required to appreciate the striking design of the Cobra tower. The towers come with female beer thread sockets and do not include shanks or faucets. We recommend the stainless Cobra Tower Shank and stainless Intertap forward-sealing faucets. When installing the shanks you will also need a tailpiece gasket to create a good seal. For chilling the tower we highly recommend the KOMOS DraftMaster glycol chiller. This unit features a built-in submersible pump intended for pushing glycol or ice water through the Cobra tower's cooling loop. The pump can be turned on independently to circulate cooling solution constantly while you're serving from the tower, and then turned off when not in use. The DraftMaster also has 4 built-in draft coils that sit in the glycol reservoir, so you can serve from kegs at room temperature by passing the beer through the chiller on its way to your faucet. Features: Dual Tap Glycol Loop 8mm OD stainless steel lines Female Beer Thread (5/8" BSP) sockets for attaching shanks Made from cast brass with chrome plating Faucets and faucet shanks not included Dimesnions: Height: 14.16 inches from mounting plate Width: 4.16 inches 1 inch OD Please note: the beverage lines and glycol loop do not come marked. To identify them, blow air into the lines. If the air comes out of another line, that's the glycol loop. If the air comes out at the shank socket, it's a beverage line.
$145.75
Made from high-quality Slavonian oak sustainably sourced from Hungarian forests Superior in long term storage due to the tight grain and slow release of phenolic compounds Equivalent or superior quality compared to French Oak barrels at a much more affordable cost Zinc-plated steel barrel hoops for corrosion resistance Coopered by the world-renowned Balazs Nagy Balazs barrels is a long-trusted brand of Hungarian oak barrels coopered by the famous Balazs Nagy. These barrels are equal or better in quality to French Oak barrels but available at a fraction of the cost of their more famous counterparts. Renowned for respecting fruit, Hungarian barrels offer winemakers a great option to impact the mouthfeel, structure and flavor of wine without stepping on the terroir of your grapes. Due to the tight grain and slow release of phenolic compounds, you can feel secure storing your wine in Hungarian barrels longer than you can with other barrels. The slow process of micro oxygenation rounds the wine while various compounds in the wood such hemicellulose, lipids, and lignins are slowly integrated. As most barrel makers know, the best source of wood for wine barrels is the oak grown in the territory of old-time Hungary, known as Slavonian oak. This rare, high-quality oak can be found in the Zemplén Mountains and in the Tokaj oak woods. The specific type of oak in those territories, and what is used in Balazs barrels, is the Quercus Petrea. This oak is characterised by a dense, hard structure combined with extra flavor. Forestry workers look after these forests with considerable expertise, and the forest density ratio in Hungary is 20–24%, with selective logging taking place between November and April. Once the wood is sourced, it is air dried and aged for 24-28 months before cooperage. Balázs Barrels is establishing a direct cooperation with the forestry workers, ensuring the continuous supply of the best quality oak, allowing them to source and work with the most excellent oak for wine barrel manufacturing from the foremost Hungarian forests. 56 L (14.8 gal) Height - 24" Head Diameter - 14.37" Abdomen Diameter - 18.3" Stave Thickness - 7/8 - 1" Bung Hole - 41 mm Empty Weight - 51 lbs Medium Toast Barrel hoops made from zinc-plated steel for corrosion resistance
$529.99 $394.63
Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and spigot are included Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha. Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks. This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy. All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage. Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration. Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside. Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes 3/4" chrome plated spigot. Includes: 304 Stainless Tank 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dry Airlock for tank Chrome Plated Spigot 400L Specifications: Nominal volume: 400 Liters (105.7 gallons) Effective volume: 405 Liters (107.0 gallons) Diameter: 65 cm (26 inches) Height: 130 cm (51 inches) Valve size: 3/4" BSP Thickness (Bottom X side, in mm): 1.0 X 0.7 *Please Note: Tank may differ slightly from image shown. Stands are sold separately.
$1,099.99 $910.05
Commercial quality beer bottle caps to keep your brew safe and sound from bottling day until you're ready to enjoy it. You will get a good firm seal that will last through transport, gift giving, and storage with these silver bottle caps. These bottle caps crimp down onto the beer bottle and make a firm seal. They don’t rust or leak and they contain an Oxygen absorbing agent in the liner, which means you won’t get any unwanted oxidation. A good value for a great product. 26 mm diameter caps fit American bottles. Some imported bottles and some sparkling wine bottles use a 29 mm cap instead. We recommend test fitting prior to filling if you're re-using an imported bottle. Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.
$249.99 $128.16
Sometimes a single draft tower isn't enough for your dream home bar or kegerator. If you're building out a draft system that will have more than four faucets, we highly recommend the KOMOS Double T Bar Draft Tower. Available in 6-tap and 8-tap models, these towers provide ample room for your faucets and will give your draft setup a much cleaner look than having multiple single-column towers. Perfect for upgrading an existing KOMOS Double-Wide Kegerator with two individual towers or designing your own home bar or kegerator. Mounting hardware, tower collars and gaskets included. The tower does not include faucets, shanks, tap handles, or draft tubing. Assembly To assemble the tower, remove the dust caps on either side and remove the foam insulation. Start with the inner most shank hole on either side and work your way outward. We recommend installing each shank and attaching the draft tubing before moving on to the next shank hole. The top section of the tower is 5" in diameter, so most people should be able to reach inside to install the shanks by hand or with the help of a draft wrench. When all the shanks have been mounted, reinsert the foam insulation. The tower may come with more insulation than needed and may need to be cut thinner before reinserting. We recommend using the Double Offset Shank Wrench to help with assembly. Duotight Compatible Tower Shanks We highly recommend pairing the draft tower with Intertap Tower Shanks with Duotight Compatible Barb. When it comes to assembly, there's nothing easier than Duotight push-to-connect fittings, and the same goes for whenever you might need to disassemble a line for cleaning. Duotight fittings pair perfectly with EVABarrier draft tubing, our preferred beer & gas tubing that offers superior protection from oxidation, CO2 loss, and microbial growth. Tower Dimensions: 29.5" L x 5" D x 16" H. The centers of the columns are approximately 16" apart. Not compatible with the KOMOS Olympus III kegerator.
$329.99 $272.74
Speidel's BO style tank is a flat bottomed, variable volume tank for basic storage of wine. A no-frills tank that's just rock solid. For a pre-configured version of this tank style that can be pre-ordered for wine season please see our GER110VF, GER220VF, GER290VF and GER650VF tanks. Key Features Available from 110L to 1600L effective capacity. Stated tank volumes do not include the extra wall height needed to secure the lid when the tank is full. Tanks can contain their stated volume of wine. Up to 290L tanks have a 17mm wide lid flange, larger tanks have a 42mm flange 110L & 220L tanks have 3/4" female BSP bottom port, 290L, 650L, 1100L, & 1600L Tanks have 1" male BSP bottom port. Liter scale on tank exterior View the resource Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
$1,024.99 $991.79
Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT514). Also compatible with shielded thermowell for digital temperature controller probes (FE62). Speidel Quality Features: Rubber Lid Gaskets: Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 550mm D x 999mm H (21.6" D x 39.3" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.
$1,009.99 $667.80
Variable capacity tank well-suited for fermentation, short-term wine storage, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Tank & lid are made from 304 stainless steel with a food-grade, clear plastic gasket for the lid Air pump with pressure gauge, dry airlock, and spigot are included Made in Italy by Marchisio Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha. Considerations for Winemaking When used in winemaking we recommend these tanks for fermentation and short-term storage. If you are considering storing wine in a variable volume tank for longer than a month, we suggest you consider our German-made Speidel Variable Volume Tanks. In addition to other quality features like a mirror polish inside, thicker stainless, and robotically welded seams, Speidel tanks feature a proprietary lid gasket that only fits their tanks. This gasket is made from a very high quality, thick, white, food-grade, material that makes a true seal and resists oxygen transfer. This gasket also does not have the seam line that clear gaskets have. To learn more about the clear gaskets watch our video listed below the product copy. All variable volume tanks other than those from Speidel, including these tanks from Marchisio, feature a standard clear gasket that is sufficient for many applications, but we do not recommend them for long term wine storage. Marchisio We have been buying tanks from Marchisio since the 1990’s, so we have a long history of collaboration. Marchisio is a classic Italian tank manufacturer that represents the best value in the industry. Great quality at a very competitive price. All tanks have a classic marbled finish on the outside and a smooth polished finish on the inside. Each tank includes a dry airlock – a style of airlock that has a marble inside to make a seal. We recommend replacing this airlock with a classic water airlock to reduce potential oxidation. Includes 1/2" chrome plated spigot. Includes: 304 Stainless Tank 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dry Airlock for tank Chrome Plated Spigot 200L Specifications: Nominal volume: 200 Liters (52.8 gallons) Effective volume: 200 Liters (52.8 gallons) Diameter: 50 cm (20 inches) Height: 120 cm (47 inches) Valve size: 1/2" BSP Thickness (Bottom X side, in mm): 1.0 X 0.7 *Please Note: Tank may differ slightly from image shown. Stands are sold separately.
$764.99 $505.81
5-gallon Ball Lock Keg made from beverage-grade 304 stainless steel. Ideal for beer, cider, kombucha, cold-brew coffee or any other beverage you want to serve on draft. Single steel handle provides easy mobility while keeping the in & out posts clear for connection. Rubber boot bottom won't scratch up the floor of your kitchen or home bar area. Manufactured in an ISO 9001-certified facility with robotically welded seams for superior quality. The KOMOS Homebrew keg is the perfect option for beer, cold brew coffee, kombucha, cider, or any other beverage you want to serve your home bar patrons on draft. These ball lock kegs are built in an ISO 9001-certified facility and made from beverage-grade 304 stainless steel with robotically welded seams. The single steel handle is positioned away from the ball lock posts, so you'll never have trouble connecting or routing your draft lines. The rubber boot bottom allows you to move your kegs around without fear of scratching up your floors, which is especially nice if your kegerator setup is on hardwood floors, and they can be stacked on top of other homebrew kegs with a rubber top. Comes with a standard corny keg lid with pull ring PRV, providing both manual and automatic pressure relief. Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams Single Ergonomic Steel Handle Rubber Boot Bottom ISO9001 Quality Assurance NSF Approved Made from 304 Stainless Steel 25.25" H x 8.75" D
$99.17
High-quality stainless steel fermentation and storage tank Gasketed lid creates an airtight seal of long-term storage with no oxygen ingress Impeccable 2R (IIId) surface finish for easy cleaning A versatile vessel that works perfectly for storing, mixing, fermenting, and transporting liquid Made in Germany by Speidel This new universal cask from Speidel is perfect for storing, mixing, fermenting, and transporting a variety of liquids. These premium storage tanks have a gasketed lid for airtight storage, handles for easy moving, and fittings to add airlocks or taps as necessary. These casks are made with Speidel's impeccable craftsmanship, meaning high quality 304 stainless steel construction with a IIId surface finish, insuring easy cleanup and a long service life. Features: 304 SS construction IIId surface finish - easy cleanup 15 l (3.9 gal) volume Gasketed sealed tanks - no oxygen permeation during storage 35.2 cm (13.9") Height x 28 cm (11") Ø German quality construction with 25 year warranty Airlock hole with sealing cap in lid - use for storage or buy an airlock to use for fermenting
$317.87
Bring the party with you! The BumperBar is the utlimate portable bar and cocktail companion. Here at MoreBeer! we obviously love our beer, but sometimes nothing jump starts a party like the ability to mix up a custom cocktail. Is it Mojito day? Bring your limes and mint. Are we doing Old Fashioneds? Pack the simple syrup, bitters and cherries. Wherever you choose to go, pack a BumperBar, and the party will flow. While the BumperBar was originally designed for tailgating and serving killer cocktails anywhere, it might be most useful right in your own house. Having an outdoor party? Set up a bar on your patio table. Have a killer game room but no permanent bar? Set up a BumperBar. During a party does everyone end up hanging out in your kitchen - oh yes you can - set up a BumperBar in the kitchen. The BumperBar was designed to be counter depth so, while it looks really nice on a tailgate, it will fit perfectly on any counter in your house. We've also seen the BumperBar used as a designated spot for pouring wine. Set up a few bottles in the liquor tray and leave all the wine glasses on the mat. Need to justify the BumperBar to someone? Tell them its also great for picnics, can be used for killer lemonade stands, and as a mocktail bar at kids parties. We could go on, but now we got you thinking. Made from rich Walnut with heavy duty hardware, the BumperBar is handsome and rugged. The rear liquour tray holds bottles up to 1.5L. The removable rubber mat and garnish tray can both be placed in the dishwasher for easy clean up. If you want to be super cool get the optional Wingman which includes an ice bucket, ice scoop, and cutting board. Nothing says "maaybeee I will have one" like cutting fresh limes. The BumperBar includes: Removable professional grade, rubber bar mat 4 compartment stainless cocktail garnish tray Bar caddy organizer 100 cocktail napkins 50 cocktail umbrellas 50 cocktail picks Wine/bottle opener Challenger coin (great as a napkin weight) Stainless cocktail stirrer
$247.69
This is a dome lid for Ss Brewtech 1/2 bbl Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.
$83.95 $68.97
The KOMOS Deluxe Kegerator model boasts the same features as the standard model with an eye-catching stainless steel extrerior and upgraded stainless steel drip tray. The interior is designed to fit up to four 5-gallon ball lock kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless door and exterior, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless steel door, top cover, and side panels Stainless Countertop Style Drip Tray Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feauture a Guard Rail as seen in the residental kegerator instructions.) Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
$879.99 $722.96
You have seen 112 out of 112 products
