KOMOS

Stainless steel shank comes with a back nut, plastic collar, and a 3/16" tailpiece with hex nut and gasket. If desired, the barb can be removed and swapped for a different size or replaced with a Duotight x Beer Thread Adapter. This size of beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer. The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 4-1/4" - Total Length (Tip to Tip) 3-1/8" - Shank Length (Without Nut & Nipple) 2-1/4" - Thread Length 1-3/4" - Pass Through Length 3/16" Nipple

Read more less

NukaTap faucets offer reduced first pour foam due to low thermal mass Forward-sealing design prevents beer residue from gumming up the faucet Unique shuttle design greatly improves laminar flow, improving the pour of carbonated beverages Compatible with all Intertap faucet accessories and shanks Matte Black painted finish. See note below. Nothing looks quite as nice as beer pouring out of a sleek, matte black draft tower. These are the same tower kits included with the KOMOS Kegerator, featuring NukaTap Stealth Bomber faucets, EVABarrier draft tubing, and Duotight push-to-connect fittings for easy assembly. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great! NukaTap Stainless Faucets and Towers These kits come with NukaTap Stealth Bomber faucets mounted on a stainless tower with matte black finish. NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. The modular, threaded spout can fit a variety of attachments including a growler filler or stout spout. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. Includes: Stainless steel draft tower w/ Matte Black Finish NukaTap Stealth Bomber faucet(s) Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 13.4 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar) Please note: this is a painted faucet and as such needs to be used, cleaned, and handled with care. Clean the faucet gently by hand and avoid tossing it into a bucket with other draft parts. Excessive soaking in caustic cleaners will damage the finish. For these reasons, we do not recommend the Stealth Bomber faucets for professional settings. If you prefer a stainless steel spout that can take more punishment, the matte black towers are also sold separately and can be paired with the NukaTap Punisher Edition faucet.  

Read more less

Stainless steel 1/4 in. barb for flare fitting connections. For use with 1/4 in. swivel nut (KEG1106 or KEG1107). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.

Read more less

Instant Identification: Color-coded (Red for Gas, Yellow for Beverage) for quick post recognition. Universal Compatibility: Fits both ball lock and pin lock homebrew keg posts. Secure Seal: Made from silicone for superb malleability and spring back memory performance. Universal keg post O-rings can be used with both ball lock and pin lock homebrew kegs. These O-rings go on the outside of your homebrew keg posts (also referred to as body connects) which is where you connect your ball lock or pinlock quick disconnects. Use Red for Gas-In and Yellow for Bev-Out to quickly and easily identify your posts.

Read more less

Silicone regulator stem o-ring. Commonly used on Taprite regulators which have an o-ring located where the regulator stem mates with the CO2 cylinder. Comes in a convenient zip lock bag. NOTE: These are not intended for use with the KOMOS CO2 Regulator. For the correct KOMOS Regulator replacement gasket, please see D1089.

Read more less

Everything you need to start enjoying your delicious beer on draft! No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator Featuring the hottest homebrew keg around—the all-stainless, stackable Slimline Torpedo Keg EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap! From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 1.5, 2.5, or 5 gallon Slimline Torpedo Keg. These are the hottest homebrew kegs on the market, featuring stackable base, rolled stainless handles, and labeled In and Out body connects for your QDs. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup. Included: KOMOS Dual Gauge Regulator KOMOS 5 lb aluminum CO2 cylinder Slimline Ball Lock Torpedo Keg (1.5, 2.5, or 5 gal) EVABarrier beer & gas lines Duotight Ball Lock Quick Disconnects (QDs) Duotight-compatible plastic picnic faucet KOMOS 7-in-1 Multi Tool Wrench Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.

Read more less

Nothing looks quite as nice as beer pouring out of a shiny stainless steel draft tower. These are the same tower kits included with every KOMOS Kegerator, featuring Intertap stainless steel faucets, EVABarrier draft tubing, and Duotight push-to-connect fittings for easy assembly. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great! Stainless Intertap Faucets and Towers These kits come with Intertap faucets mounted on a brushed stainless tower. Intertap faucets are the newest, most advanced, forward sealing, beer faucets on the market today and will work perfectly for years. Forward-sealing means that while in the closed position the faucet will keep beer inside the body instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Intertap faucets feature a modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. Includes: Stainless steel draft tower Intertap faucet(s) Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Beverage line measures 4mm ID x 8mm OD Gas line measures 5mm ID x 8mm OD Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 16 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)  

Read more less

These 5/8" silicone gaskets are used anywhere you're mounting a tailpiece. This could be on the back of your draft faucet shank or on either port of a commercial keg coupler. Comes in a convenient zip lock bag.

Read more less

1" stainless steel hex nut. Used to attach a tailpiece barb to either a faucet shank or keg coupler. You will also need a tailpiece gasket to form a seal. See below for EPDM, Silicone, and Vinyl options. Female Beer Thread (5/8" BSP) 5/8" top port opening Comes in a convenient zip lock bag.

Read more less

This replacement gasket installs on the backside of your faucet. Seals between where the faucet and the draft shank connect. Comes in a convenient zip lock bag.

Read more less

Replacement body washers for D-Style Sanke keg couplers. Comes in a convenient zip lock bag.

Read more less

The KOMOS DraftMaster is a perfect solution for small beer-serving establishments. This is very unique, dual purpose glycol beer chiller, with the ability to chill a trunk line while also being able to cool 4 additional unfrigerated beers inline. It features 4 built-in stainless steel draft coils that remain submersed in a glycol solution reservoir, as well as a dedicated submersible draft line pump that can be used to pump glycol solution through flooded draft towers or other draft line chilling apparatuses. The draft coils are made from 8 mm OD stainless steel tubing. The inlets and outlets come ready for use with 8 mm Duotight fittings, or standard hose clamp / compression fittings if preferred. The temperature drop of the beverage after one pass through the coil will depend on several factors, such as the temp of the pre-chilled beer, reservoir solution, and ambient environment. Ideally, the DraftMaster should be used in ambient temperatures below 80°F with a 30% glycol solution. If operating the unit in hotter climates or with a non-glycol cooling solution, if you are using the inline chilling coils you may need to pass the beverage through two coils to lower it to serving temperature. Although the DraftMaster is ideally used with propylene glycol to lower the cooling solution below 32°F, home users may find it works perfectly well with 100% distilled/RO water. We recommend leaving the reservoir temperature at or above 38°F when using water only, which will work well for cooling a single KOMOS Cobra tower or other glycol-ready draft tower. Specifications: 4 built-in 8 mm OD stainless draft coils Submersible pump: 35 watts Max Head: 21 ft. (6.5 m) Max Flow Rate: 528 GPH (2000 LPH) 30L / 8 Gallon Water Tank Capacity 3/8 HP compressor 750 Watt/2600 btu Cooling Capacity Draft coils made from 304 stainless steel Labeled IN and OUT bulkheads r134a Refrigerant 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Warning: do not set the reservoir temperature controller lower than 25°F (-4°C). Running the chiller below this temperature may damage the unit.

Read more less

Replacement o-ring for Universal Poppets. The poppet is the piece inside a ball lock or pin lock keg post that interfaces with homebrew keg quick disconnects. Comes in a convenient zip lock bag.

Read more less

Nothing looks quite as nice as beer pouring out of a sleek, matte black draft tower. These are the same tower kits included with the KOMOS Kegerator. Includes EVABarrier draft tubing and Duotight push-to-connect fittings for easy assembly. These towers can be purchased without faucets, or you can choose your preferred faucets from the add-on options above. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great! Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. Includes: Stainless steel draft tower with matte black finish Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 15.75 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)   Please note: Perlick Flow Control faucets are not compatible with the included Intertap tower shanks. Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.  

Read more less

Replacement pressure relief valve rated to blow at 65 psi. This is a direct replacement of the PRV featured on the KOMOS® CO2 regulator. The Green PRV can also be used with pressurizable FermZilla models for hydro testing. Note that under normal operation, the FermZilla should always be used with the Red PRV.  

Read more less

A great item to keep on hand just in case. The nylon washer helps form an airtight seal between the KOMOS regulator and your gas cylinder. These washers can wear down over time and need replacing, so we always recommend having a spare or two ready to go so you're not left high and dry when the original washer breaks down.  

Read more less

Connect draft tubing to your keg coupler or faucet shank. Recommended for 3/16" or 1/4" ID draft lines. Tailpiece and hex nut are made of stainless steel.

Read more less

This dual sided screw has one side which goes into a Faucet Tap Ferrule and the other is a wood screw to go into a wooden tap handle. Perfect for creating your own custom handles. 5/16-18 thread. Comes in a convenient zip lock bag.

Read more less

Bev Out ball lock quick disconnect with 1/4 in. flare connection. Flare fitting barbs come in multiple sizes so you can choose the draft tubing size that best suits your needs. Features a built-in washer so you will not need a separate nylon washer. Manufactured in Germany by CM Becker. Packaged in the U.S. and distributed by KOMOS.

Read more less

Replacement internal o-ring gasket for ball lock or pin lock quick disconnects. This flat washer fits inside the body of the QD when you unscrew the top port. Comes in a convenient zip lock bag.

Read more less

Stainless steel swivel nut for 1/4 in. flare fitting connections. For use with 1/4 in. barbs (KEG1108). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.

Read more less

If you plan on storing your kegerator outdoors, this is a great way to protect it from the elements. The KOMOS kegerator cover is made from waterproof fabric and has hot tape sealed stitching to protect your kegerator from moisture. It also comes with a panel that you can lift up so you can open the door without having to remove the whole cover.  

Read more less

Replacement probe washers for D-Style Sanke keg couplers. Comes in a convenient zip lock bag.

Read more less

Replace a missing or damaged gas-in check valve on your Sanke Coupler. This one way gas bladder prevents beer from back-flowing up your gas line and into your regulator where it could cause damage. Comes in a convenient zip lock bag.

Read more less

Chrome plated brass shank comes with a back nut, plastic collar, and a welded 3/16" nipple. This beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer.  The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 4-1/4" - Total Length (Tip to Tip) 3-1/2" - Shank Length (Without Nipple) 2-5/8" - Thread Length 2-3/8" - Pass Through Length 3/16'' - Bore

Read more less

Shutoff check valves can be used in multiple gas applications. Commonly added to CO2 regulators or manifolds to protect your equipment from back flow. 1/4" NPT check valve with 1/4" barb. Use with 1/4" or 5/16" ID gas line.

Read more less

Put your ball lock or pin lock homebrew keg back into perfect working order with the KOMOS corny keg rebuild kit. Includes brand new o-rings for the keg lid, dip tubes, and keg posts / body connects. Comes in a convenient zip lock bag.

Read more less

Universal Poppets can be used with both ball lock and pin lock homebrew kegs. Poppets are one of the critical parts that makes the keg function, so it's always a good idea to have spares on hand. This 10-pack of Universal Poppets represents a great value for brewers buying in bulk. Comes in a convenient zip lock bag.

Read more less

Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit! The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Optional Draft Towers Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you! Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Optional Faucets The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable. For more info on each faucet option, check them out below the description. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Drip Tray is removable for easy cleaning Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Outdoor Kegerator.

Read more less

The KOMOS shank wrench is designed to tighten the nut on the back of a faucet shank. It is double offset for clearance inside of coffin boxes and larger round towers and to move the handle away from the insulation or other nearby objects. Also super handy when tightening shanks inside a cold box when space is at a premium and it hard to fit a traditional wrench. Pubs have historically made their own, now you can get one the easy way. Laser Cut from 12 guage 304 Stainless Steel. Offset 3/4" on each end to fit around insulation or inside of small towers. Features: 1-1/16" 12 Point Wrench 1-1/8" 12 Point Wrench Made from 304 Stainless Steel  

Read more less

Reduce first pour foam by keeping your draft lines icy cold Extra thick neoprene insulates the tower, preventing excess temperature loss to the ambient environment Reduce cooling cycles and save power Customizable to your number and arrangement of faucets Tailor-made for KOMOS kegerators and works with most 3" draft towers The KOMOS draft tower sleeve is made from extra thick 7 mm neoprene, providing great insulation to your tower that will keep your draft lines icy cold. Although the KOMOS kegerators come standard with a tower cooling fan, the stainless steel tower will lose some of that coldness to the warmer ambient environment. By insulating the tower, you can minimize temperature loss, reduce cooling cycles, and saving power. This neoprene insulating tower sleeve will fit KOMOS kegerators like a glove, but can be used with most 3" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Also available in a size suitable for 4.5" diameter draft towers. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets

Read more less

Convert draft shanks or keg couplers for use with 1/2" female threaded fittings. Featuring a hex nut exterior for easy wrench adjustments. The female side is standard Beer Thread (5/8" BSP) which is used on both ports of standard keg couplers and the tail end of draft shanks. Once installed, you can adapt these input/output ports to any 1/2" fittings and valves you might find useful. The 1/2" male BSP end may require teflon tape if used with 1/2" NPT fittings. Made from 304 stainless steel.

Read more less

Over time the internal diaphragm can wear out and result in drifting pressure or a slow leak through the regulator body. Replacing the diaphragm is usually the best path to the fixing these issues so your regulator can return to holding consistent pressures. Compatible with both the single and dual-body KOMOS regulators.

Read more less

Protects your regulator from damage if the tank is knocked over Made from durable 304 stainless steel with black resin coating Designed to fit KOMOS Premium Regulators (D1077 & D1175) perfectly Affordable "cheap insurance" against costly regulator replacement Includes all necessary mounting hardware This gauge cage is made specifically for the KOMOS Dual Gauge Regulators (D1077 & D1175) and will fit like a glove. Protect your regulator at an affordable price and avoid having to purchase a new one if bumped into or knocked over.  Please Note: Regulator not included. Shown for demo only. Please Note: This gauge cage is only compatible with the D1077 and D1175 Premium model KOMOS regulators. It is not compatible with Universal model KOMOS regulators D1170 and D1171.  

Read more less

Adapt 1/4" male pipe thread to 1/4" male flare thread, making any 1/4" FPT fitting compatible with flare fittings or flare threaded Duotight fittings. Made from chrome plated brass.

Read more less

The last faucet wrench you'll ever own!  The KOMOS Draft Wrench is a professional 7 function draft tool built for a lifetime of adjusting everything from your regulator and draft shanks to your keg coupler and hose clamps. You will appreciate the quality, compared to cheaper stamped draft wrenches, everytime you use it.  The KOMOS Draft Wrench is laser cut from 12-gauge 304 Stainless Steel and hand finished. Designed by a draft tech with professional draft techs in mind. With all of its different functions, the Pro Draft Wrench is sure to save you many back-and-forth trips to the toolbox. However, we suggest a traditional Crescent wrench for loosening over tightened regulator to tank connections. The KOMOS wrench is great for general purpose, but a Crescent wrench is suggested when extra torque is needed. Features: Pin Wrench Screwdriver Regulator Adjuster Nut Wrench Keg Tap Probe Wrench Shank Coupler Nut Wrench Shank Lock Nut Wrench Regulator Wrench  

Read more less