Replacement o-ring for Universal Poppets. The poppet is the piece inside a ball lock or pin lock keg post that interfaces with homebrew keg quick disconnects.
Comes in a convenient zip lock bag.
Stainless steel 1/4 in. barb for flare fitting connections. For use with 1/4 in. swivel nut (KEG1106 or KEG1107). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.
A great item to keep on hand just in case. The nylon washer helps form an airtight seal between the KOMOS regulator and your gas cylinder. These washers can wear down over time and need replacing, so we always recommend having a spare or two ready to go so you're not left high and dry when the original washer breaks down.
Replacement internal o-ring gasket for ball lock or pin lock quick disconnects. This flat washer fits inside the body of the QD when you unscrew the top port.
Comes in a convenient zip lock bag.
Replacement gaskets and o-rings for standard US keg couplers (D-Style) and European keg couplers (S-Style). Other than the probe washer, they use the same gaskets and check valves.
Replace a missing or damaged gas-in check valve on your Sanke Coupler. This one way gas bladder prevents beer from back-flowing up your gas line and into your regulator where it could cause damage.
Comes in a convenient zip lock bag.
This replacement gasket installs on the backside of your faucet. Seals between where the faucet and the draft shank connect.
Comes in a convenient zip lock bag.
These stainless steel butterfly hose clamps are the ideal choice for connecting silicone tubing to quick disconnects, pumps, and more. The butterfly thumb screw allows for toolless tightening and untightening, so you can build out or break down your system without rummaging through the toolbox for the right screwdriver.
Fits 1/2 in. OD to 1 in. OD tubing. Actual size of the clamp is 14-25 mm (0.55-0.98 in.).
Comes in a convenient zip lock bag.
Put your ball lock or pin lock homebrew keg back into perfect working order with the KOMOS corny keg rebuild kit. Includes brand new o-rings for the keg lid, dip tubes, and keg posts / body connects.
Comes in a convenient zip lock bag.
Everything you need to start enjoying your delicious beer on draft!
No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles
Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator
Featuring the hottest homebrew keg around—the all-stainless, stackable Slimline Torpedo Keg
EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings
The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap!
From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 1.5, 2.5, or 5 gallon Slimline Torpedo Keg. These are the hottest homebrew kegs on the market, featuring stackable base, rolled stainless handles, and labeled In and Out body connects for your QDs. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup.
Included:
KOMOS Dual Gauge Regulator
KOMOS 5 lb aluminum CO2 cylinder
Slimline Ball Lock Torpedo Keg (1.5, 2.5, or 5 gal)
EVABarrier beer & gas lines
Duotight Ball Lock Quick Disconnects (QDs)
Duotight-compatible plastic picnic faucet
KOMOS 7-in-1 Multi Tool Wrench
Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.
Reduce first pour foam by keeping your draft lines icy cold Extra thick neoprene insulates the tower, preventing excess temperature loss to the ambient environment Reduce cooling cycles and save power Customizable to your number and arrangement of faucets Tailor-made for KOMOS kegerators and works with most 3" draft towers The KOMOS draft tower sleeve is made from extra thick 7 mm neoprene, providing great insulation to your tower that will keep your draft lines icy cold. Although the KOMOS kegerators come standard with a tower cooling fan, the stainless steel tower will lose some of that coldness to the warmer ambient environment. By insulating the tower, you can minimize temperature loss, reduce cooling cycles, and saving power. This neoprene insulating tower sleeve will fit KOMOS kegerators like a glove, but can be used with most 3" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Also available in a size suitable for 4.5" diameter draft towers. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets
The KOMOS shank wrench is designed to tighten the nut on the back of a faucet shank. It is double offset for clearance inside of coffin boxes and larger round towers and to move the handle away from the insulation or other nearby objects. Also super handy when tightening shanks inside a cold box when space is at a premium and it hard to fit a traditional wrench. Pubs have historically made their own, now you can get one the easy way.
Laser Cut from 12 guage 304 Stainless Steel. Offset 3/4" on each end to fit around insulation or inside of small towers.
Features:
1-1/16" 12 Point Wrench
1-1/8" 12 Point Wrench
Made from 304 Stainless Steel
This dual sided screw has one side which goes into a Faucet Tap Ferrule and the other is a wood screw to go into a wooden tap handle. Perfect for creating your own custom handles. 5/16-18 thread.
Comes in a convenient zip lock bag.
These 5/8" silicone gaskets are used anywhere you're mounting a tailpiece. This could be on the back of your draft faucet shank or on either port of a commercial keg coupler.
Comes in a convenient zip lock bag.
Adapt 1/4" male pipe thread to 1/4" male flare thread, making any 1/4" FPT fitting compatible with flare fittings or flare threaded Duotight fittings.
Made from chrome plated brass.
Nothing looks quite as nice as beer pouring out of a sleek, matte black draft tower. These are the same tower kits included with the KOMOS Kegerator. Includes EVABarrier draft tubing and Duotight push-to-connect fittings for easy assembly. These towers can be purchased without faucets, or you can choose your preferred faucets from the add-on options above. The tower is made from 304 brushed stainless steel, making them corrosion resistant while also looking great!
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our tower kits come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each tower comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
Includes:
Stainless steel draft tower with matte black finish
Stainless steel faucet shank(s) with Duotight tailpieces
EVABarrier gas and beverage tubing
Draft tower mounting screws
Faucet wrench
1-3 Tap Tower Dimensions:
13.4 in. tall (without faucets)
3 in. tower diameter
4.4 in. base diameter
4 Tap Tower Dimensions:
15.75 in. tall (without faucets)
4.5 in. tower diameter
Interior mounting holes (does not include bottom collar)
Please note: Perlick Flow Control faucets are not compatible with the included Intertap tower shanks.
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Connect draft tubing to your keg coupler or faucet shank. Recommended for 3/16" or 1/4" ID draft lines. Tailpiece and hex nut are made of stainless steel.
If you plan on storing your kegerator outdoors, this is a great way to protect it from the elements. The KOMOS kegerator cover is made from waterproof fabric and has hot tape sealed stitching to protect your kegerator from moisture. It also comes with a panel that you can lift up so you can open the door without having to remove the whole cover.
Replacement starter relay for KOMOS kegerator compressor. Includes compressor starter (black) and compressor protector (white).
Compatible with Standard and Deluxe kegerator models. Not compatible with Double-Wide, outdoor or commercial kegerators.
Compatible with either your sanke keg coupler or draft shank and held in place with a hex nut & gasket. This 1/4 in. tailpiece is commonly used with 3/16 in. ID draft tubing for a tight fit.
Comes in a convenient zip lock bag.
Chrome plated brass shank comes with a back nut, plastic collar, and a welded 3/16" nipple. This beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer.
The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project.
Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
Dimensions:
4-1/4" - Total Length (Tip to Tip)
3-1/2" - Shank Length (Without Nipple)
2-5/8" - Thread Length
2-3/8" - Pass Through Length
3/16'' - Bore
Over time the internal diaphragm can wear out and result in drifting pressure or a slow leak through the regulator body. Replacing the diaphragm is usually the best path to the fixing these issues so your regulator can return to holding consistent pressures. Compatible with both the single and dual-body KOMOS regulators.
Compatible with either your sanke keg coupler or draft shank and held in place with a hex nut & gasket. This 5/16 in. tailpiece is commonly used with 1/4 in. ID draft tubing for a tight fit.
Comes in a convenient zip lock bag.
The KOMOS draft line kit includes lengths of EVABarrier draft tubing, the same tubing used in all KOMOS kegerators. Each kit includes beer line and gas line, and Duotight tee fittings to split your gas line (excluding single tap kit). See below for recommended Duotight fittings.
EVABarrier tubing is a high-quality double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! The outer barrier gives the tubing a nice stiffness that makes it extremely kink resistant and perfect for use with push-in fittings. The inner wall is an excellent gas barrier, keeping oxygen out and CO2 in. The internal surface of the tubing is extremely smooth, making it difficult for bacteria and microbes to cling to.
Kits Include:
Beverage line
Measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line
Measures 5mm ID x 8mm OD
1 x line of varying length depending on number of taps (2, 2.5, or 3m)
4 Tap kit includes uncut rolls of bev & gas line
We recommend cutting bev lines to 5.5-6.5 ft. lengths
Gas lines can be cut to whatever length best suits your needs
Duotight tee fittings to split gas line (for 2-Tap and higher)
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Made from high-quality aluminum that will never rust like steel tanks
Dispense 18 x five-gallon kegs of homebrew
CGA320 valve pairs with standard US-style CO2 gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
Go with the larger 10 lb CO2 tank and extend the time between needing to refill or swap for a full tank
Brand new aluminum 10 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 10 lb tank because it holds 10 lbs of compressed (liquified) CO2. 10 lbs of CO2 is enough to dispense about 20x 5-gallon kegs of homebrew.
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
20.75" T x 6.875 Ø
DOT approved
New high quality CGA-320 valve
Light weight compared to steel tanks
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The KOMOS DraftMaster is a perfect solution for small beer-serving establishments. This is very unique, dual purpose glycol beer chiller, with the ability to chill a trunk line while also being able to cool 4 additional unfrigerated beers inline. It features 4 built-in stainless steel draft coils that remain submersed in a glycol solution reservoir, as well as a dedicated submersible draft line pump that can be used to pump glycol solution through flooded draft towers or other draft line chilling apparatuses.
The draft coils are made from 8 mm OD stainless steel tubing. The inlets and outlets come ready for use with 8 mm Duotight fittings, or standard hose clamp / compression fittings if preferred. The temperature drop of the beverage after one pass through the coil will depend on several factors, such as the temp of the pre-chilled beer, reservoir solution, and ambient environment. Ideally, the DraftMaster should be used in ambient temperatures below 80°F with a 30% glycol solution. If operating the unit in hotter climates or with a non-glycol cooling solution, if you are using the inline chilling coils you may need to pass the beverage through two coils to lower it to serving temperature.
Although the DraftMaster is ideally used with propylene glycol to lower the cooling solution below 32°F, home users may find it works perfectly well with 100% distilled/RO water. We recommend leaving the reservoir temperature at or above 38°F when using water only, which will work well for cooling a single KOMOS Cobra tower or other glycol-ready draft tower.
Specifications:
4 built-in 8 mm OD stainless draft coils
Submersible pump:
35 watts
Max Head: 21 ft. (6.5 m)
Max Flow Rate: 528 GPH (2000 LPH)
30L / 8 Gallon Water Tank Capacity
3/8 HP compressor
750 Watt/2600 btu Cooling Capacity
Draft coils made from 304 stainless steel
Labeled IN and OUT bulkheads
r134a Refrigerant
110V (3.6 amps)
Dimensions: 16.1" x 16.1" x 26"
Wheels included
CE Certified
Warning: do not set the reservoir temperature controller lower than 25°F (-4°C). Running the chiller below this temperature may damage the unit.
This stainless pressure relief valve offers precise control and easy to adjust. The elongated body provides room for a taller spring to make small adjustments more accurate. Tune in the pressure setting from 0 to 30 psi using the knurled adjustment knob. 1/4" male pipe thread.
Bev Out ball lock quick disconnect with 1/4 in. flare connection. Flare fitting barbs come in multiple sizes so you can choose the draft tubing size that best suits your needs. Features a built-in washer so you will not need a separate nylon washer.
Manufactured in Germany by CM Becker. Packaged in the U.S. and distributed by KOMOS.
Stainless steel swivel nut for 1/4 in. flare fitting connections. For use with 1/4 in. barbs (KEG1108). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.
For repairing a broken tap handle of building one from scratch. The tap ferrule is the piece you'll see at the bottom of most tap handles and is where the handle is screwed onto the faucet lever. You will also need hanger bolts (D2532) to screw the ferrule into a wood tap handle.
5/16" top threads and 3/8" bottom threads.
Pack of 5. Comes in a convenient zip lock bag.
Shutoff check valves can be used in multiple gas applications. Commonly added to CO2 regulators or manifolds to protect your equipment from back flow. 1/4" NPT check valve with 1/4" barb. Use with 1/4" or 5/16" ID gas line.
Convert draft shanks or keg couplers for use with 1/2" female threaded fittings. Featuring a hex nut exterior for easy wrench adjustments. The female side is standard Beer Thread (5/8" BSP) which is used on both ports of standard keg couplers and the tail end of draft shanks. Once installed, you can adapt these input/output ports to any 1/2" fittings and valves you might find useful.
The 1/2" male BSP end may require teflon tape if used with 1/2" NPT fittings.
Made from 304 stainless steel.
These stainless short shanks are typically used for attaching faucets to a KOMOS® Cobra style draft tower. The threaded section measures 25mm in length (0.98").
Please Note: When installing Cobra Tower Shanks onto the tower, some exposed threading is normal due to the tower's design and does not impact sealing performance. For a cleaner, professional aesthetic, we recommend using a shank spacer to cover the threads and provide a flush finish against the tower surface.
The last faucet wrench you'll ever own! The KOMOS Draft Wrench is a professional 7 function draft tool built for a lifetime of adjusting everything from your regulator and draft shanks to your keg coupler and hose clamps. You will appreciate the quality, compared to cheaper stamped draft wrenches, everytime you use it. The KOMOS Draft Wrench is laser cut from 12-gauge 304 Stainless Steel and hand finished. Designed by a draft tech with professional draft techs in mind.
With all of its different functions, the Pro Draft Wrench is sure to save you many back-and-forth trips to the toolbox. However, we suggest a traditional Crescent wrench for loosening over tightened regulator to tank connections. The KOMOS wrench is great for general purpose, but a Crescent wrench is suggested when extra torque is needed.
Features:
Pin Wrench
Screwdriver
Regulator Adjuster Nut Wrench
Keg Tap Probe Wrench
Shank Coupler Nut Wrench
Shank Lock Nut Wrench
Regulator Wrench
Upgrade the wheels of your Komos kegerator to these heavy duty 100mm wheels. Each wheel is rated up to 220 lbs and made with steel bearings. Includes 2 locking and 2 non-locking wheels. Compatible with Standard and Deluxe models. For the Double-Wide model, see here. Includes 2x locking wheels and 2x non-locking. NOTE: The locking wheels need to be attached on the non-hinged side of the door as the hinge will get in the way of the locking mechanism. Mounting screws are not included.
Stainless steel 5/16 in. barb for flare fitting connections. For use with 1/4 in. swivel nut (KEG1110). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.
Reduce first pour foam by keeping your draft lines icy cold Extra thick neoprene insulates the tower, preventing excess temperature loss to the ambient environment Reduce cooling cycles and save power Customizable to your number and arrangement of faucets Tailor-made for KOMOS kegerators and works with most 4.5" draft towers The KOMOS draft tower sleeve is made from extra thick 7 mm neoprene, providing great insulation to your tower that will keep your draft lines icy cold. Although the KOMOS kegerators come standard with a tower cooling fan, the stainless steel tower will lose some of that coldness to the warmer ambient environment. By insulating the tower, you can minimize temperature loss, reduce cooling cycles, and saving power. This neoprene insulating tower sleeve will fit KOMOS kegerators like a glove, but can be used with most 4.5" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Also available in a size suitable for 3" diameter draft towers. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets
Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Works prefectly as a fermentation chamber, or add draft tower and faucet options to deck out the kegerator as you see fit! The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, aluminum floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 4" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Optional Draft Towers Both draft tower options are made from stainless steel, a huge upgrade over chrome plated towers commonly found on other kegerators. The difference is simply in the appearance. Do you prefer the sleek look of brushed stainless, or the quietly ominous appearance of matte black? The matte black tower option pairs perfectly with the NukaTap Stealth Bomber faucets, which also feature a matte black finish. Or mix and match. You do you! Each draft tower kit comes standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier—no more hose clamps or heating water to soften tubing. Duotight fittings are included for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Optional Faucets The most popular forward-sealing faucets we offer are, without a doubt, the Intertap and the NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both faucets feature s modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout, and all attachments are cross compatible. The Intertap boasts all stainless steel internal components, whereas NukaTap's internal shuttle is made from TPV, but the NukaTap was designed with a lower thermal mass for reduced first pour foam. And for the price-conscious brewer, we off the industry standard beer faucet. It may not have the same bells and whistles as the other options, but it is no less dependable. For more info on each faucet option, check them out below the description. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust MKIII CO2 Regulator included Pre cut hole on top perfectly sized for 3" diameter tower CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Drip Tray is removable for easy cleaning Aluminum floor panel for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Available Kegerator covers and "off road" casters for moving over uneven terrain. Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall 35" with Caster wheels 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Outdoor Kegerator.
Protects your regulator from damage if the tank is knocked over
Made from durable 304 stainless steel for longevity
Designed to fit KOMOS Premium Regulator (D1077) perfectly
Affordable "cheap insurance" against costly regulator replacement
Includes all necessary mounting hardware
This gauge cage is made specifically for the KOMOS Premium CO2 Regulator (D1077) and will fit like a glove. Protect your regulator at an affordable price and avoid having to purchase a new one if bumped into or knocked over.
Please Note: Regulator not included. Shown for demo only.
Please Note: This gauge cage is only compatible with the D1077 model KOMOS regulator. It is not compatible with models D1170, D1171, D1175.
Protects your regulator from damage if the tank is knocked over
Made from durable 304 stainless steel with black resin coating
Designed to fit KOMOS Premium Regulators (D1077 & D1175) perfectly
Affordable "cheap insurance" against costly regulator replacement
Includes all necessary mounting hardware
This gauge cage is made specifically for the KOMOS Dual Gauge Regulators (D1077 & D1175) and will fit like a glove. Protect your regulator at an affordable price and avoid having to purchase a new one if bumped into or knocked over.
Please Note: Regulator not included. Shown for demo only.
Please Note: This gauge cage is only compatible with the D1077 and D1175 Premium model KOMOS regulators. It is not compatible with Universal model KOMOS regulators D1170 and D1171.
Due to high demand, the 2.5 gal is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
Everything you need to start enjoying your delicious beer on draft!
No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles
Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator
Featuring a brand-new ball lock corny keg with rubber booted bottom and top handles
EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings
The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap!
From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 2.5 or 5 gallon Ball Lock Corny Keg. These brand-new kegs are made in the style of the iconic Cornelius homebrew keg with rubber base and molded rubber handles at the top. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup.
Included:
KOMOS Dual Gauge Regulator
KOMOS 5 lb aluminum CO2 cylinder
Ball Lock Corny Keg (2.5 or 5 gal)
EVABarrier beer & gas lines
Duotight Ball Lock Quick Disconnects (QDs)
Duotight-compatible plastic picnic faucet
KOMOS 7-in-1 Multi Tool Wrench
Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.
