Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Made from high-quality aluminum that will never rust like steel tanks
Dispense up to 9 x five-gallon kegs of homebrew
CGA320 valve pairs with standard US-style CO2 gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
Standard 5 lb size is ideal for home draft applications—compact enough to fit inside you kegerator and won't need to be refilled too often
Brand new aluminum 5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 5 lb tank because it holds 5 lbs of compressed (liquified) CO2. 5 lbs of CO2 is enough to dispense about 8 to 9x 5-gallon kegs of homebrew.
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
18" T x 5.25 Ø
DOT approved
New high quality CGA-320 valve
Light weight compared to steel tanks
Replacement temperature control circuit board for the KOMOS standard, deluxe, or Double-Wide kegerator. Not compatible with outdoor or commercial kegerators.
Reduce first pour foam by keeping your draft lines icy cold Extra thick neoprene insulates the tower, preventing excess temperature loss to the ambient environment Reduce cooling cycles and save power Customizable to your number and arrangement of faucets Tailor-made for KOMOS kegerators and works with most 3" draft towers The KOMOS draft tower sleeve is made from extra thick 7 mm neoprene, providing great insulation to your tower that will keep your draft lines icy cold. Although the KOMOS kegerators come standard with a tower cooling fan, the stainless steel tower will lose some of that coldness to the warmer ambient environment. By insulating the tower, you can minimize temperature loss, reduce cooling cycles, and saving power. This neoprene insulating tower sleeve will fit KOMOS kegerators like a glove, but can be used with most 3" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Also available in a size suitable for 4.5" diameter draft towers. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets
The KOMOS draft line kit includes lengths of EVABarrier draft tubing, the same tubing used in all KOMOS kegerators. Each kit includes beer line and gas line, and Duotight tee fittings to split your gas line (excluding single tap kit). See below for recommended Duotight fittings.
EVABarrier tubing is a high-quality double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! The outer barrier gives the tubing a nice stiffness that makes it extremely kink resistant and perfect for use with push-in fittings. The inner wall is an excellent gas barrier, keeping oxygen out and CO2 in. The internal surface of the tubing is extremely smooth, making it difficult for bacteria and microbes to cling to.
Kits Include:
Beverage line
Measures 4mm ID x 8mm OD
1 x 1.7m length of line per tap
Gas line
Measures 5mm ID x 8mm OD
1 x line of varying length depending on number of taps (2, 2.5, or 3m)
4 Tap kit includes uncut rolls of bev & gas line
We recommend cutting bev lines to 5.5-6.5 ft. lengths
Gas lines can be cut to whatever length best suits your needs
Duotight tee fittings to split gas line (for 2-Tap and higher)
If you plan on storing your kegerator outdoors, this is a great way to protect it from the elements. The KOMOS kegerator cover is made from waterproof fabric and has hot tape sealed stitching to protect your kegerator from moisture. It also comes with a panel that you can lift up so you can open the door without having to remove the whole cover.
Serve beer on tap at home! A quality CO2 tank is a core component to any home draft system.
Made from high-quality aluminum that will never rust like steel tanks
Dispense 18 x five-gallon kegs of homebrew
CGA320 valve pairs with standard US-style CO2 gas regulators
KOMOS® offers a full suite of first-rate draft products and draft fittings—from kegs to faucets and everything in between!
Go with the larger 10 lb CO2 tank and extend the time between needing to refill or swap for a full tank
Brand new aluminum 10 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 10 lb tank because it holds 10 lbs of compressed (liquified) CO2. 10 lbs of CO2 is enough to dispense about 20x 5-gallon kegs of homebrew.
Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder.
Tanks should always be stored in an upright position.
Features:
Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
20.75" T x 6.875 Ø
DOT approved
New high quality CGA-320 valve
Light weight compared to steel tanks
Replacement starter relay for KOMOS kegerator compressor. Includes compressor starter (black) and compressor protector (white).
Compatible with Standard and Deluxe kegerator models. Not compatible with Double-Wide, outdoor or commercial kegerators.
Easily connect Sanke kegs to your new KOMOS™ Kegerator! These connection kits come with a single a single Sanke D-style coupler with Duotight adapters to connect with the tubing provided with your kegerator. Choose from the number of taps on your kegerator and you will receive a set of Sanke D-style coupler and Duotight adapters for each keg.
Upgrade the wheels of your Komos kegerator to these heavy duty 100mm wheels. Each wheel is rated up to 220 lbs and made with steel bearings. Includes 2 locking and 2 non-locking wheels. Compatible with Standard and Deluxe models. For the Double-Wide model, see here. Includes 2x locking wheels and 2x non-locking. NOTE: The locking wheels need to be attached on the non-hinged side of the door as the hinge will get in the way of the locking mechanism. Mounting screws are not included.
Reduce first pour foam by keeping your draft lines icy cold Extra thick neoprene insulates the tower, preventing excess temperature loss to the ambient environment Reduce cooling cycles and save power Customizable to your number and arrangement of faucets Tailor-made for KOMOS kegerators and works with most 4.5" draft towers The KOMOS draft tower sleeve is made from extra thick 7 mm neoprene, providing great insulation to your tower that will keep your draft lines icy cold. Although the KOMOS kegerators come standard with a tower cooling fan, the stainless steel tower will lose some of that coldness to the warmer ambient environment. By insulating the tower, you can minimize temperature loss, reduce cooling cycles, and saving power. This neoprene insulating tower sleeve will fit KOMOS kegerators like a glove, but can be used with most 4.5" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Also available in a size suitable for 3" diameter draft towers. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets
If you've stuffed your kegerator to max capacity, this simple door latch will give you peace of mind. Keeping the door tightly sealed will make sure you're getting optimal efficiency from the kegerator and guarantee the door won't pop open if you have all of your kegs packed in tight. The Double-Wide kegerator comes with pre-tapped mounting holes to install the optional door latch.
A power drill is recommended for mounting the fridge-side latch piece.
If you plan to install your KOMOS outdoor kegerator under the counter, you'll need this door hinge and mounting screws. When building the kegerator into your outdoor kitchen or home bar, the top cover must be removed. This will replace the top door hinge that is taken away with the cover.
This set of rolling casters is a direct replacement to those included with the KOMOS V2 Kegerator. They can also be used in your own kegerator or keezer build project by simply attaching them directly to the unit. Mounting hardware not included.
Set of 4 caster wheels. 2 locking, 2 non-locking.
Upgrade the wheels of your Komos kegerator to these heavy duty 100mm wheels. Each wheel is rated up to 220 lbs and made with steel bearings. Includes 2 locking and 4 non-locking wheels. Compatible with Double-Wide model. For Standard and Deluxe models, see here. Includes 2x locking wheels and 4x non-locking. NOTE: The locking wheels need to be attached on the non-hinged side of the door as the hinge will get in the way of the locking mechanism. Mounting screws are not included.
Replacement glass door for the right side of the Olympus II or middle and/or right side of the Olympus III kegerator.
Please note: This glass door is a direct replacement part for the standard Olympus model which has been superseded by the Olympus Deluxe model. The door has a black trim rather than the stainless steel trim of the deluxe model.
Replacement glass door for the left side of the Olympus II or Olympus III kegerator.
Please note: This glass door is a direct replacement part for the standard Olympus model which has been superseded by the Olympus Deluxe model. The door has a black trim rather than the stainless steel trim of the deluxe model.
This solid black door for the left side of the Olympus II or Olympus III kegerator can be installed if you want one of the interior sections of the fridge to be protected from sunlight. The solid doors provide better insulation compared to the glass doors, and will protect beer bottles and draft lines from UV exposure if the fridge is positioned in direct sunlight.
This solid black door for the right side of the Olympus II or middle and/or right side of the Olympus III kegerator can be installed if you want one of the interior sections of the fridge to be protected from sunlight. The solid doors provide better insulation compared to the glass doors, and will protect beer bottles and draft lines from UV exposure if the fridge is positioned in direct sunlight.
