Unbeatable value for a homebrew counter pressure bottle filler!
Fill bottles directly from your keg with virtually no CO2 loss
Purge oxygen from bottles before filling to preserve the quality of your beer
Accessory set included for multiple connection options — no expensive add-on items needed!
Duotight connections offer unparalleled customization and adaptability to your specific needs
Compatible with forward-sealing faucets — NukaTap, Intertap, Perlick 600-series and others
Running late but don't want to leave home without a couple of bottles of your latest creation? The Nukatap Counter Pressure Bottle Filler will have your precious cargo packed and ready at the drop of a hat! Slip it right into the nozzle of your Nukatap, Intertap, or other forward-sealing faucet to fill bottles right from the tap. Gas can be quickly connected using a bare end of 8 mm OD EVABarrier tubing, or connect the included Ball Lock Adapter to hook up gas using a Ball Lock Quick Disconnect. Not enough room under your draft tower? No problem! Like the gas-in port, you can swap out the push-in spout for the Duotight adapter, allowing you to connect tubing directly to the filler, or connect a Ball Lock Post Adapter and use a Ball Lock jumper line to fill right off your keg. While other fillers on the market force you to purchase upgrade accessories to improve functionality, the Nukatap Filler gives you more options to fill right from the get-go.
This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle.
Counterpressure filling is the absolute best option for packaging beer from your keg without affecting its quality. Filling a growler straight from the tap is always an option, but if you want your beer to be at its best when you share it with the world, this is only way to go. The Nukatap Filler will make sure your brew doesn't pick up oxygen or lose carbonation in the filling process, keeping your creation in tip-top condition
Includes:
All stainless steel counter pressure filler
Push-in spout compatible with forward-sealing faucets
(2) 8 mm Duotight adapters for filler and NukaTap spout
(2) Ball Lock Post Adapters (Red / Yellow)
19.5" length of 8 mm OD x 5 mm ID EVABarrier tubing
KegLand Part Number: KL21760
G2 model features redesigned flow control mechanism for improved shank sealing and flow control Make instant adjustments to beverage flow as you pour Switch from pouring pints to filling growlers without adjusting your CO2 regulator Reduced first pour foam due to low thermal mass Forward-sealing design prevents beer residue from gumming up the faucet Unique shuttle design greatly improves laminar flow, improving the pour of carbonated beverages Compatible with all Intertap faucet accessories and shanks Generation 2 The NukaTap Flow Control G2 uses a completely new flow control mechanism with better sealing properties against the shank as well as improved flow control. Control the Flow The flow control model is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share. The NukaTap Flow Control faucet is also the first FC model to be fully compatible with the optional self-closing spring. First Pour Foam Reduction Every kegerator owner knows the letdown of pouring your first pint of the day and getting too much foam. Even with perfectly balanced draft lines, first pour foam is sometimes unavoidable simply due to the temperature of the faucet itself. Running beer through the faucet will drop the temperature, and the foaming will subside, but not without a bit of wasted beer from pouring off excess head. The NukaTap beer faucet drops to beer serving temperature much faster thanks to its lower thermal mass. Simply put, the bulkier the faucet is, the more beer is needed to flow through and chill the tap. The NukaTap is over 20% lighter than its Intertap predecessor, and even lighter still compared to other brands of faucets. Improved Laminar Flow The inspiration for the NukaTap name comes from its uniquely designed "nuke-shaped" shuttle that resides on the inside of the faucet. The NukaShuttle went through numerous rounds of redesigns and countless hours of testing to find a shape that provides superior laminar flow. This means that liquid passes by the shuttle with very little resistance, allowing highly carbonated beers or hard seltzers to pour like a dream. Sanitary Design The NukaShuttle is the world’s first seamless single-piece design. Traditional taps feature an o-ring seated on a stainless steel shuttle, which can cause a couple of issues. After many pours, the stainless shuttle rubbing against the internal body of the faucet will create small fissures that become potential infection sites, and the seated o-ring can be difficult to clean in place, making your draft cleaning and sanitizing process less effective than you realize. The NukaShuttle is an advanced TPV rubber matrix that has been seamlessly formed over a durable PP skeleton. This single-piece design eliminates the pitfalls of older manufacturing methods, making it one of the most sanitary faucets on the market. Forward Sealing vs. Rear Sealing From tap rooms to home bars, forward-sealing faucets are the ideal choice for any draft setup. In traditional rear-sealing taps, beer will drain out of the entire faucet when it's in the closed position. This means the internal mechanism is coated in beer, which then dries and becomes a sticky residue. Forward-sealing faucets, on the other hand, keep the tap full of beer so it never has a chance to dry and gunk up the internal parts. This makes the faucet much easier to clean and also reduces the chance of off flavors transferring to your beer while you pour. Made from stainless steel Shuttle made from TPV O-rings made from EPDM Kegland Part Number: KL15523
Newest faucet design on the market!
Reduced first pour foam due to low thermal mass
Forward-sealing design prevents beer residue from gumming up the faucet
Unique shuttle design greatly improves laminar flow, improving the pour of carbonated beverages
Compatible with all Intertap faucet accessories and shanks
First Pour Foam Reduction
Every kegerator owner knows the letdown of pouring your first pint of the day and getting too much foam. Even with perfectly balanced draft lines, first pour foam is sometimes unavoidable simply due to the temperature of the faucet itself. Running beer through the faucet will drop the temperature, and the foaming will subside, but not without a bit of wasted beer from pouring off excess head. The NukaTap beer faucet drops to beer serving temperature much faster thanks to its lower thermal mass. Simply put, the bulkier the faucet is, the more beer is needed to flow through and chill the tap. The NukaTap is over 20% lighter than its Intertap predecessor, and even lighter still compared to other brands of faucets.
Improved Laminar Flow
The inspiration for the NukaTap name comes from its uniquely designed "nuke-shaped" shuttle that resides on the inside of the faucet. The NukaShuttle went through numerous rounds of redesigns and countless hours of testing to find a shape that provides superior laminar flow. This means that liquid passes by the shuttle with very little resistance, allowing highly carbonated beers or hard seltzers to pour like a dream.
Sanitary Design
The NukaShuttle is the world’s first seamless single-piece design. Traditional taps feature an o-ring seated on a stainless steel shuttle, which can cause a couple of issues. After many pours, the stainless shuttle rubbing against the internal body of the faucet will create small fissures that become potential infection sites, and the seated o-ring can be difficult to clean in place, making your draft cleaning and sanitizing process less effective than you realize. The NukaShuttle is an advanced TPV rubber matrix that has been seamlessly formed over a durable PP skeleton. This single-piece design eliminates the pitfalls of older manufacturing methods, making it one of the most sanitary faucets on the market.
Forward Sealing vs. Rear Sealing
From tap rooms to home bars, forward-sealing faucets are the ideal choice for any draft setup. In traditional rear-sealing taps, beer will drain out of the entire faucet when it's in the closed position. This means the internal mechanism is coated in beer, which then dries and becomes a sticky residue. Forward-sealing faucets, on the other hand, keep the tap full of beer so it never has a chance to dry and gunk up the internal parts. This makes the faucet much easier to clean and also reduces the chance of off flavors transferring to your beer while you pour.
Made from stainless steel
Shuttle made from TPV
O-rings made from EPDM
NSF approved
Kegland Part Number: KL15509
Turn your Intertap or Nukatap faucet into a self-closing faucet with the use of this stainless steel faucet spring. Forces the tap handle back to the closed position when you let go. This spring is designed to work with the Intertap Stainless Steel shanks, though we have found it also works with our D1245A. Made from 304 Stainless Steel. Not compatible with Flow Control faucet models or other brands of faucets. Kegland Part number: KL00994
Outfit any 3" diameter draft tower with these stainless steel Intertap Tower Shanks with Duotight compatible tailpiece. The 1/4" barb pairs perfectly with the Duotight 6.35 mm x 8 mm reducer (DUO100), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 & D1718).
The Duotight fitting is sold separately and can be found below under "You Might Also Need".
Please note these shanks are not compatible with Perlick flow control faucets.
Kegland Part number: KL01137
Forward-sealing design prevents beer residue from gumming up the faucet!
Threaded spout can be replaced with a variety of attachments
Unique sliding shuttle design allows the faucet to last longer than standard floating o-ring design
304 stainless steel construction
The patented Stainless Steel Intertap Faucet is a forward sealing faucet that represents the most modern faucet design. It has a modular, threaded spout which can fit a variety of different attachments including a growler filler or a stout spout.
In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour.
Other forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time.
The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all.
304 Stainless Steel construction so you don't have to worry about chrome plating wearing off and exposing your beer to brass.
Kegland Part number: KL00970
Comes with a back nut, plastic collar, hex nut, and 8 mm Duotight Adapter compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Requires a 1" hole saw for installation. When set in place, the shank will only have about 2 1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 5-1/8" - Total Length (Tip to Tip) 4" - Shank Length (Without Nut & Barb) 3" - Thread Length 2-1/2" - Pass Through Length Kegland Part number: KL11945
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.
The ultimate portable draft faucet! Compact & lightweight with all the advantages of a standard NukaTap forward sealing faucet
Includes NukaTap Mini, Flow Control Ball Lock QD, Duotight Adapter, and Self Closing Spring
Forward-sealing design prevents beer residue from gumming up the faucet
Reduced first pour foam due to low thermal mass and conductivity
Perfect for mobile draft, mini kegs, sampling from fermenters, and can even be installed on your kegerator or keezer
Mini Design – Ideal Flow Rate for Small Systems
Most conventional beer faucets are designed with 3/8" diameter spouts so you can pour a pint in just over 10 seconds. This type of flow rate is great for high turnover bars and commercial venues but isn't necessary or even desirable for all applications. For compact portable systems and home draft systems, a slower flow rate is easier to control and further reduces foaming issues due to the low liquid volume stored in the body of the faucet.
The NukaTap Mini is also more ideal for pouring smaller doses. For example, cocktails where 5-8 oz of liquid is dispensed is difficult to control with a high flow rate tap. For portable systems, the NukaTap Mini with the Flow Control Ball Lock QD & Duotight Adapter assembly is small enough to literally put in your pocket, making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight.
Forward Sealing
Forward sealing faucets are absolutely the way to go when it comes to beer taps. Old legacy taps still exist in the industry that are simply poorly designed. The issue with rear sealing faucets is that beer dries up on the internal piston. Aside from being unsanitary, as more and more beer dries up in these components the faucet can almost glue completely shut causing damaged seals or broken handles (this is particularly the case if it's left for some time to dry out with beer inside). These older legacy designs still exist probably due to poor education. The forward sealing designs do not have this problem and the tap drains out completely with no beer drying up on the mechanical moving parts in the same way. This makes the tap more sanitary and reduces maintenance. In many instances the price is similar so there is no reason to use a poorly designed rear sealing faucet. All NukaTap faucets are forward sealing.
Laminar Flow
Just like the NukaTap SS and NukaTap FC, the NukaTap Mini has been designed with laminar flow in mind. Laminar flow is critical for a beer tap as it means you will pour the beer with minimal foaming and a substantial reduction in wastage. Think about how many times a beer faucet opens and closes in its lifetime. 1,000 or maybe 10,000 times? Laminar flow saves wasted beer in excessive foam and the better laminar flow easily pays for itself in a reduction in lost beer. To use poorer designed faucets is essentially flushing money down the sink. Extensive modeling has been done on the NukaTap design to improve laminar flow.
Integrated Seals That Are Indestructible and More Sanitary
Unlike other designs, the NukaTap Mini body is made from Polyketone (POK) making it strong, robust, and able to be autoclaved. The seals are also over-molded from Santoprene® making them hard wearing so they will literally last for the lifetime of the tap without the need for replacement. Santoprene® and POK both have excellent resistance to chemicals such as caustic soda, peroxide, phosphoric acid, lactic acid, citric acid, acetic acid, and all common chemicals sold and used in the beverage industry. The seals internally are over-molded meaning no fissures or cracks exist for bacteria, crud, or yeast to hide.
Superior First Pour Foam Due to Low Thermal Mass and Conductivity
First pour foam is an issue caused by a warm tap body. For most faucets to pour well it's important to dispense enough beer to cool the tap body down to reach maximum performance. In addition to this the conductivity of the tab body also makes this worse so insulative materials simply work better than conductive materials. The NukaTap mini not only has very low thermal mass but is also highly insulative being made mostly from Santoprene® and POK. The combination of these two factors in conjunction with superior laminar flow makes for the lowest "first pour foam" effect out of any tap ever produced.
Long Shank Alternative
Most conventional beer faucets require a large 3/4" hole to be drilled through the side of your refrigerator, keezer, or cold box wall. Traditional long shanks also generally have a large volume of liquid that sits inside the wall unrefrigerated which is not ideal. New long shank alternatives developed for the NukaTap Mini are designed to suit any wall thickness and greatly reduces the stagnant beer sitting in the shank itself. For walls up to 2.7" thick, these wall mount shank kits include three screws, however if the wall is thicker, you can also use 6 small wood screws or something similar and attach three screws from the front and 3 from the back allowing you to go into any wall type.
Another advantage of this new design is the tap will never accidentally rotate. Typically, other long shank beer taps rely on the hex nut on the shank to be done up tight enough to prevent rotation but if the wall compresses (often the case with foam walls) the tap is allowed to rotate. This new design has three fixing points making it impossible for the tap to rotate accidentally as the interlocking teeth behind the collet allow you to set the angle and then do up the collet to fix the tap permanently in that position.
Standard, plunger-style sample valves can be a bit of hassle when it's time to check your gravity or do a taste test. Replace it with this simple T.C. x Draft Shank adapter which allows you to pour samples with your preferred beer faucet. We recommend using the NukaTap Flow Control Faucet with Self-Closing Spring. This will allow you to put some restriction on the beer flow and come in very handy when taking samples from a pressurized conical or brite tank. Also compatible with Intertap, Perlick, and other faucets. Please note: standard NukaTap SS Faucet and Self-Closing Spring will not work with this shank. You can use a NukaTap SS faucet, but without the autoclose spring. Specifications: 2.75" total length Standard shank assembly 1.5" T.C. connection KegLand Part Number: KL19989
This Self Closing Spring is made of 304 stainless steel and designed specifically to ensure your NukaTap stays closed when it should. Simply let go of the tap handle and the tap will snap shut and prevent accidentally leaving the faucet open and wasting pressure beer. This handy device suits all NukaTap Mini tap and shank combinations as well as the G2 NukaTap Flow Control faucet (D15841). NukaTap Mini sold separately here. KegLand Part Number: KL32216
Simply unscrew the normal spout on an Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. For additional disc options, check out the 7-Disc Creamer/Aerator Kit. Compatible with Intertap and NukaTap faucets. Stainless Steel Construction Kegland Part number: KL01021
Replacement gaskets and o-rings for the Intertap SS and PC faucets
Does not work with Intertap FC faucets or NukaTap faucets.
Kegland Part number: KL01168
Includes the newest Gen 3 POK cup seal washers Provides a full set of seals to quickly fix leaks, replace lost seals, or maintain taps used in demanding settings Compatible with all standard NukaTap beer faucets (not suitable for the flow control model)
This handy kit contains all the seals needed for the standard NukaTap stainless beer faucet. Regardless of which generation of seals your faucet came with, you can replace or upgrade them with the Gen 3 POK cup seal washers. For the NukaTap Flow Control seal kit, see here. Most of the seals in this kit are durable and won't require frequent replacement. However, if you experience a leak, accidentally lose a seal, or use the tap in a demanding commercial environment, this kit has you covered. When replacing seals, we recommend applying a food-grade lubricant to ensure a long-lasting and secure fit. As you take the tap apart, it can also be helpful to take a picture or make a note of where each seal is located to make reassembly easier. Includes: The Nuke! Tap Coupling Washer Bonnet Washer 2 x Black Generation 3 POK Cup Seal Washers Nozzle Washer How to tell what generation NukaTap you have:
Generation 1 - Two White Nylon Cup Seal Washers Generation 2 - Two Red Self Lubricating Nylon Cup Seal Washers Generation 3 - Two Black POK Cup Seal Washers KegLand Part Number: KL43021
Easily attaches to any Intertap faucet. Just unscrew the standard spout and replace it with this growler spout. Then you'll have a 1/2" (13mm) barb on the end of your faucet.
Compatible with Intertap and NukaTap faucets.
Stainless Steel Construction
Kegland Part number: KL01038
Tune the Stout Spout on your Intertap or NukaTap faucet with this set of perforated discs! Not all beverages are the same so this kit offers a range of aerator discs so you can find the perfect disc for your stout or cold brew coffee. The Stout Spout has a removable creamer/aerator disc inside. It is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer. With this range of discs, you can mix and match with ease to find which one serves your particular beverage justice with more restriction or more areas for that creaming effect to push through the spout. Kit Contains: 0.3mm Drilled Disc with 3 x holes 0.3mm Drilled Disc with 5 x holes 0.5mm Drilled Disc with 1 x hole 0.5mm Drilled Disc with 3 x holes 0.5mm Drilled Disc with 5 x holes 0.7mm Drilled Disc with 1 x hole 0.7mm Drilled Disc with 3 x holes KegLand Part Number: KL12591
An Intertap accessory that converts the spout of an Intertap faucet into a ball lock quick disconnect. One of the most popular uses is being able to connect the beverage side of your counter pressure filler without having to open your refrigerator door.
Compatible with Intertap and NukaTap faucets.
Stainless Steel Construction
Kegland Part number: KL01052
Includes every replacement seal for the NukaTap Flow Control faucet, ensuring you're prepared for any maintenance needs
This kit contains all the seals needed to upgrade a Gen 1 NukaTap Flow Control faucet to the Gen 2 mechanism, improving performance and longevity
Provides a full set of seals to quickly fix leaks, replace lost seals, or maintain taps used in demanding settings
This complete kit provides all the replacement seals you need for the Gen 2 NukaTap Flow Control faucet. If you have the Gen 1 Flow Control model, you can use the improved flow control mechanism in this kit to effectively upgrade your faucet to the Gen 2 Flow Control model.
Most of the seals in this kit are durable and won't require frequent replacement. However, if you experience a leak, accidentally lose a seal, or use the tap in a demanding commercial environment, this kit has you covered.
When replacing seals, we recommend applying a food-grade lubricant to ensure a long-lasting and secure fit. As you take the tap apart, it can also be helpful to take a picture or make a note of where each seal is located to make reassembly easier.
Includes:
The Nuke!
Bonnet Washer
2 x Black POK Cup Seal Washers
Nozzle Washer
Flow Control Arm Seals
Flow Control Arm Thread Seals
Gen 2 Flow Control Mechanism
KegLand Part Number: KL44950
The ultimate portable draft faucet! Compact & lightweight with all the advantages of a standard NukaTap forward sealing faucet Pair with a Flow Control Ball Lock QD & Duotight Adapter and the whole assembly fits in your pocket Forward-sealing design prevents beer residue from gumming up the faucet Reduced first pour foam due to low thermal mass and conductivity Perfect for mobile draft, mini kegs, sampling from fermenters, and can even be installed on your kegerator or keezer Mini Design – Ideal Flow Rate for Small Systems Most conventional beer faucets are designed with 3/8" diameter spouts so you can pour a pint in just over 10 seconds. This type of flow rate is great for high turnover bars and commercial venues but isn't necessary or even desirable for all applications. For compact portable systems and home draft systems, a slower flow rate is easier to control and further reduces foaming issues due to the low liquid volume stored in the body of the faucet. The NukaTap Mini is also more ideal for pouring smaller doses. For example, cocktails where 5-8 oz of liquid is dispensed is difficult to control with a high flow rate tap. For portable systems, the NukaTap Mini with the Flow Control Ball Lock QD & Duotight Adapter assembly is small enough to literally put in your pocket, making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight. Forward Sealing Forward sealing faucets are absolutely the way to go when it comes to beer taps. Old legacy taps still exist in the industry that are simply poorly designed. The issue with rear sealing faucets is that beer dries up on the internal piston. Aside from being unsanitary, as more and more beer dries up in these components the faucet can almost glue completely shut causing damaged seals or broken handles (this is particularly the case if it's left for some time to dry out with beer inside). These older legacy designs still exist probably due to poor education. The forward sealing designs do not have this problem and the tap drains out completely with no beer drying up on the mechanical moving parts in the same way. This makes the tap more sanitary and reduces maintenance. In many instances the price is similar so there is no reason to use a poorly designed rear sealing faucet. All NukaTap faucets are forward sealing. Laminar Flow Just like the NukaTap SS and NukaTap FC, the NukaTap Mini has been designed with laminar flow in mind. Laminar flow is critical for a beer tap as it means you will pour the beer with minimal foaming and a substantial reduction in wastage. Think about how many times a beer faucet opens and closes in its lifetime. 1,000 or maybe 10,000 times? Laminar flow saves wasted beer in excessive foam and the better laminar flow easily pays for itself in a reduction in lost beer. To use poorer designed faucets is essentially flushing money down the sink. Extensive modeling has been done on the NukaTap design to improve laminar flow. Integrated Seals That Are Indestructible and More Sanitary Unlike other designs, the NukaTap Mini body is made from Polyketone (POK) making it strong, robust, and able to be autoclaved. The seals are also over-molded from Santoprene® making them hard wearing so they will literally last for the lifetime of the tap without the need for replacement. Santoprene® and POK both have excellent resistance to chemicals such as caustic soda, peroxide, phosphoric acid, lactic acid, citric acid, acetic acid, and all common chemicals sold and used in the beverage industry. The seals internally are over-molded meaning no fissures or cracks exist for bacteria, crud, or yeast to hide. Superior First Pour Foam Due to Low Thermal Mass and Conductivity First pour foam is an issue caused by a warm tap body. For most faucets to pour well it's important to dispense enough beer to cool the tap body down to reach maximum performance. In addition to this the conductivity of the tab body also makes this worse so insulative materials simply work better than conductive materials. The NukaTap mini not only has very low thermal mass but is also highly insulative being made mostly from Santoprene® and POK. The combination of these two factors in conjunction with superior laminar flow makes for the lowest "first pour foam" effect out of any tap ever produced. Long Shank Alternative Most conventional beer faucets require a large 3/4" hole to be drilled through the side of your refrigerator, keezer, or cold box wall. Traditional long shanks also generally have a large volume of liquid that sits inside the wall unrefrigerated which is not ideal. New long shank alternatives developed for the NukaTap Mini are designed to suit any wall thickness and greatly reduces the stagnant beer sitting in the shank itself. For walls up to 2.7" thick, these wall mount shank kits include three screws, however if the wall is thicker, you can also use 6 small wood screws or something similar and attach three screws from the front and 3 from the back allowing you to go into any wall type. Another advantage of this new design is the tap will never accidentally rotate. Typically, other long shank beer taps rely on the hex nut on the shank to be done up tight enough to prevent rotation but if the wall compresses (often the case with foam walls) the tap is allowed to rotate. This new design has three fixing points making it impossible for the tap to rotate accidentally as the interlocking teeth behind the collet allow you to set the angle and then do up the collet to fix the tap permanently in that position. NukaTap Mini Accessories (Sold Separately): Duotight Flow Control Ball Lock QD (DUO159) Mini Self Closing Spring (D1598A) Duotight Adapter - 8mm (D1598B) Long Shank Alternative for Wall Mounting - Duotight 8mm (D1598C) Long Shank Alternative for Wall Mounting - Duotight 6.35mm (D1598D) Stout Spout (D1598E) Vertical Clamp On Assembly (D1598G) Horizontal Clamp On Assembly (D1598H)
Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. When set in place, the shank will only have about 2 1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut.
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
Dimensions:
5-1/8" - Total Length (Tip to Tip)
4" - Shank Length (Without Nut & Barb)
3" - Thread Length
2-1/2" - Pass Through Length
Kegland Part number: KL01113
Single replacemelt ball seal (cup seal) for NukaTap draft faucets. Component #3 in the faucet diagram below. Each NukaTap has two of these washers.
Also compatible with Intertap brand faucets. Not compatible with the NukaTap Mini faucet.
How to tell what generation NukaTap you have.
Generation 1 - Two White Nylon Cup Seal Washers
Generation 2 - Two Red Self Lubricating Nylon Cup Seal Washers
Generation 3 - Two Black POK Cup Seal Washers
KegLand Part Number: KL43908
Reduced first pour foam due to low thermal mass Forward-sealing design prevents beer residue from gumming up the faucet Unique shuttle design greatly improves laminar flow, improving the pour of carbonated beverages Compatible with all Intertap faucet accessories and shanks Matte Black painted finish. See note below.
First Pour Foam Reduction Every kegerator owner knows the letdown of pouring your first pint of the day and getting too much foam. Even with perfectly balanced draft lines, first pour foam is sometimes unavoidable simply due to the temperature of the faucet itself. Running beer through the faucet will drop the temperature, and the foaming will subside, but not without a bit of wasted beer from pouring off excess head. The NukaTap Stealth Bomber beer faucet drops to beer serving temperature much faster thanks to its lower thermal mass. Simply put, the bulkier the faucet is, the more beer is needed to flow through and chill the tap. The NukaTap is over 20% lighter than its Intertap predecessor, and even lighter still compared to other brands of faucets. Improved Laminar Flow The inspiration for the NukaTap name comes from its uniquely designed "nuke-shaped" shuttle that resides on the inside of the faucet. The NukaShuttle went through numerous rounds of redesigns and countless hours of testing to find a shape that provides superior laminar flow. This means that liquid passes by the shuttle with very little resistance, allowing highly carbonated beers or hard seltzers to pour like a dream. Sanitary Design The NukaShuttle is the world’s first seamless single-piece design. Traditional taps feature an o-ring seated on a stainless steel shuttle, which can cause a couple of issues. After many pours, the stainless shuttle rubbing against the internal body of the faucet will create small fissures that become potential infection sites, and the seated o-ring can be difficult to clean in place, making your draft cleaning and sanitizing process less effective than you realize. The NukaShuttle is an advanced TPV rubber matrix that has been seamlessly formed over a durable PP skeleton. This single-piece design eliminates the pitfalls of older manufacturing methods, making it one of the most sanitary faucets on the market. Forward Sealing vs. Rear Sealing From tap rooms to home bars, forward-sealing faucets are the ideal choice for any draft setup. In traditional rear-sealing taps, beer will drain out of the entire faucet when it's in the closed position. This means the internal mechanism is coated in beer, which then dries and becomes a sticky residue. Forward-sealing faucets, on the other hand, keep the tap full of beer so it never has a chance to dry and gunk up the internal parts. This makes the faucet much easier to clean and also reduces the chance of off flavors transferring to your beer while you pour. Faucet body & lever made from stainless steel Shuttle made from TPV O-rings made from EPDM Lever collar & friction bonnet made from brass Matte black finish NSF approved Kegland Part Number: KL17978 Please note: this is a painted faucet and as such needs to be used, cleaned, and handled with care. Clean the faucet gently by hand and avoid tossing it into a bucket with other draft parts. Excessive soaking in caustic cleaners will damage the finish. For these reasons, we do not recommend the Stealth Bomber faucets for professional settings. If you prefer a stainless steel spout that can take more punishment, see the NukaTap Punisher Edition faucet.
Designed specifically for mounting the NukaTap Mini Beer Faucet on any kegerator, keezer, cold room wall, or other flat surface Connect beer line directly to the faucet, reducing the amount of temperature loss to a standard draft shank No spinning faucets. Your tap will remain in a fixed orientation once locked into the collet Easy installation. No need to drill a large hole through your fridge to accommodate a standard 5/8" draft shank Use with 8 mm OD EVABarrier draft tubing Note: Faucet Sold Separately This shank kit is specifically designed to suit the NukaTap Mini Beer Faucet and will allow you to connect the NukaTap Mini to a cooler box, kegerator, keg fridge, cold room wall or any other flat surface. This wall mount shank kit is for use with 8 mm OD EVABarrier. For the shank kit for use with 6.35 mm OD EVABarrier, see here. New Innovative Shank Design Unlike other shank kits, this kit doesn't use a bulky 5/8" threaded shank. The issue with a standard draft shank is that acts as a heat sink, and due to the fact that most shanks sit inside an insulated wall, this results in a substantial amount of warm beer coming out of the tap before cold beer starts flowing. This results in substantial "first pour foam" effect which wastes beer, can result in sour beer, and ultimately negatively effects the quality of the beverages being served. This new design has the beer line feed all the way directly up to the back of the faucet, greatly reducing the volume of non-refrigerated beer. No Spinning Shanks If you have ever installed a traditional 5/8" long shank, you will know how frustrating it is when you use the faucet and it starts rotating. This new design of shank alternative uses three screws that lock the tap into a fixed position and prevents the taps from rotating. If you loosen the 1/2" stainless tap collet you can still have the flexibility to rotate the faucet to any orientation, but once the collet is tight, interlocking teeth on this shank kit and the NukaTap Mini will hold the tap permanently in the correct orientation. Easy Installation Another advantage compared to standard shanks is that this kit doesn't require you to drill a large 3/4"-1" hole through the wall. As no shank is required, only a hole large enough to accommodate the beer line is required. As a result, an 8mm (5/16") conventional drill bit is all that is necessary for installation. However, if you are concerned about the small amount of beer sitting in the draft line inside the wall not being refrigerated, you can also shell out a larger diameter of foam on the inside of the wall to allow cold air to circulate around the beer line thus reducing the non-refrigerated beer in the line even more. If you wanted to do this the Step Drill Bit is the best tool for the job. Any Wall Thickness Other shank kits will require you to purchase a specific length shank for a specific wall thickness. This new shank alternative will fit any wall thickness. If you have wall thicknesses that are less than 2.7" thick then you can use the included screws that have "snap off" points so you can simply cut the screws down to the desired length. However, if the wall is thicker than 2.7" you can simply purchase a conventional screw from the hardware store and screw the shank kit to your wall. If the substrate is firm enough you may not even need to go all the way through the wall so a common 1-1/4" long screw may be all that is required. Specifications: Beer Line Diameter: 8 mm OD EVABarrier Collet and Screw Cover: 304 Grade Stainless Steel O-ring Material: Dual O-ring Silicone/EPDM combination Plastic Mounting: Polyketone (POK) Temperature Range: 14-212°F (-10-100°C) Max Pressure: 150 psi KegLand Part Number: KL32186
This shank's small design makes it perfect for attaching a faucet to a tower. Included on the Intertap towers that we stock but can be used to replace the short shank on any 3" diameter tower. Made from stainless steel.
Please note these shanks are not compatible with Perlick brand faucets.
Kegland Part number: KL01090
This tower shank with Matte Black finish matches perfectly with the NukaTap Stealth Bomber faucet and features a Duotight compatible tailpiece. The 1/4" barb pairs with the Duotight 6.35 mm x 8 mm reducer (DUO10), allowing you to quickly and easily connect 8 mm OD EVABarrier draft line (D1717 & D1718). The Duotight fitting is sold separately and can be found below under "You Might Also Need". Please note these shanks are not compatible with Perlick brand faucets. KegLand Part Number: KL20084
This Duotight 8 mm (5/16") adapter is designed to suit the Nukatap Mini and will allow you to couple the faucet to a wide range of other 8 mm Duotight fittings. This includes attaching it to the Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adapter. The combination of the two fittings prevents the faucet from spinning around while in use. Sold Separately: NukaTap Mini Beer Faucet (D1598) Flow Control Ball Lock Disconnect (DUO159) Mini Self Closing Spring (D1598A) KegLand Part Number: KL32209
This is a rather simple, but extremely effective way to fill growlers from your draft system! Going to a party, but don't want to bring a keg of homebrew? Filling straight from the faucet creates a lot of foam, and you lose carbonation. Simply plug this filler into your faucet, attach some 3/8" tubing, and fill! This model is designed to fit Intertap faucets.
Compatible with Intertap and NukaTap faucets.
Kegland Part number: KL01045
The Stout Spout installs on the NukaTap Mini to improve the pour of your stouts and nitro brews
The creamer/aerator disc inside strips out nitrogen gas for a creamier beer
Simply unthread the standard spout from the NukaTap Mini and swap in the Stout Spout
Simply unscrew the normal spout from the NukaTap Mini and screw this Stout Spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer.
Only compatible with the NukaTap Mini faucet. The Stout Spout will have a 1/4" female flare thread.
KegLand Part Number: KL32858
Replacement O-ring for beer faucet tower shanks D1239 and D1242.
This O-ring sits underneath the coupling nut of the shank, behind the teeth where the shank connect to the faucet.
KegLand Part Number: KL88067
This stainless steel shuttle can be used to replace the TPV rubber NukaShuttle that comes standard in the NukaTap beer faucet. For users that prefer stainless internal mechanisms in their faucet. You will need to remove the bonnet piece at the handle, pull the handle out and then slide the shuttle piece out.
Compatible with all NukaTap faucets, including Gen 2 Flow Control.
KegLand Part Number: KL35958
The Intertap faucet is a forward sealing faucet with a modular, threaded spout which can fit a variety of different attachments including a growler filler or a stout spout.
In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transferring to your beer while you pour.
Other forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time.
The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all.
Made of chrome plated brass.
Kegland Part number: KL00987
Comes with a back nut, plastic collar, hex nut, and 8 mm Duotight Adapter compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Requires a 1" hole saw for installation. When set in place, the shank will only have about 4-1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut.
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
Dimensions:
7-1/8" - Total Length (Tip to Tip)
6" - Shank Length (Without Nut & Barb)
5" - Thread Length
4-1/2" - Pass Through Length
Kegland Part number: KL11952
Get all of the amazing features and functionality out of your Intertap faucet! This kit includes all of the accessories that can be paired with the Stainless Steel Intertap forward sealing faucet. Whether you want to fill a growler or pour a stout, this faucet does it all. Everything you need to dispense from and maintain your Intertap faucet! This Kit Includes: Stainless Steel Intertap Beer Faucet (D1210) Intertap Stout Spout (D1213) Intertap Growler Filler Spout (D1214) Intertap Ball Lock Spout (D1217) Intertap Self-Closing Faucet Spring* (D1212) Intertap Seal & Gasket Kit (D1215) *Does not include shank.
Simply unscrew the normal spout on a NukaTap or Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. Matches perfectly with the NukaTap Stealth Bomber faucet! For additional disc options, check out the 7-Disc Creamer/Aerator Kit. Stainless steel construction with matte black finish. Kegland Part number: KL21135
Reduced first pour foam due to low thermal mass Forward-sealing design prevents beer residue from gumming up the faucet Unique shuttle design greatly improves laminar flow, improving the pour of carbonated beverages Compatible with all Intertap faucet accessories and shanks First Pour Foam Reduction Every kegerator owner knows the letdown of pouring your first pint of the day and getting too much foam. Even with perfectly balanced draft lines, first pour foam is sometimes unavoidable simply due to the temperature of the faucet itself. Running beer through the faucet will drop the temperature, and the foaming will subside, but not without a bit of wasted beer from pouring off excess head. The NukaTap Stealth Bomber beer faucet drops to beer serving temperature much faster thanks to its lower thermal mass. Simply put, the bulkier the faucet is, the more beer is needed to flow through and chill the tap. The NukaTap is over 20% lighter than its Intertap predecessor, and even lighter still compared to other brands of faucets. Improved Laminar Flow The inspiration for the NukaTap name comes from its uniquely designed "nuke-shaped" shuttle that resides on the inside of the faucet. The NukaShuttle went through numerous rounds of redesigns and countless hours of testing to find a shape that provides superior laminar flow. This means that liquid passes by the shuttle with very little resistance, allowing highly carbonated beers or hard seltzers to pour like a dream. Sanitary Design The NukaShuttle is the world’s first seamless single-piece design. Traditional taps feature an o-ring seated on a stainless steel shuttle, which can cause a couple of issues. After many pours, the stainless shuttle rubbing against the internal body of the faucet will create small fissures that become potential infection sites, and the seated o-ring can be difficult to clean in place, making your draft cleaning and sanitizing process less effective than you realize. The NukaShuttle is an advanced TPV rubber matrix that has been seamlessly formed over a durable PP skeleton. This single-piece design eliminates the pitfalls of older manufacturing methods, making it one of the most sanitary faucets on the market. Forward Sealing vs. Rear Sealing From tap rooms to home bars, forward-sealing faucets are the ideal choice for any draft setup. In traditional rear-sealing taps, beer will drain out of the entire faucet when it's in the closed position. This means the internal mechanism is coated in beer, which then dries and becomes a sticky residue. Forward-sealing faucets, on the other hand, keep the tap full of beer so it never has a chance to dry and gunk up the internal parts. This makes the faucet much easier to clean and also reduces the chance of off flavors transferring to your beer while you pour. NOTE: The Punisher Edition faucet features a matte black body with stainless spout. Other models are pictured as example photos. For the all black NukaTap faucet, see the Stealth Bomber Edition. Faucet body & lever made from stainless steel Shuttle made from TPV O-rings made from EPDM Lever collar & friction bonnet made from brass Matte black finish / brushed stainless spout NSF approved Kegland Part Number: KL26482 Please note: this is a painted faucet and as such needs to be used, cleaned, and handled with care. Clean the faucet gently by hand and avoid tossing it into a bucket with other draft parts. Excessive soaking in caustic cleaners will damage the finish. For these reasons, we do not recommend the Punisher Edition faucets for professional settings.
The NukaTap FC is the world's only forward-sealing flow control tap that can use an auto close spring. By inserting the spring between the flow control device and NukaTap shuttle, the tap will automatically close when you let go of the handle. This is perfect for customers who may not be diligent enough to remember to completely turn off the tap after each pour. Or for those with little kids or pesky cats that knock everything around! This very inexpensive spring can save you from emptying an entire keg and then losing a whole bottle of gas.
Please note: this spring is not compatible with the standard non-flow control NukaTap faucet or the NukaTap Flow Control G2.
KegLand Part Number: KL17985
Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. When set in place, the shank will only have about 4-1/2" of length to pass through your wall or fridge door, due to the length of the collar and back nut.
Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
Dimensions:
7-1/8" - Total Length (Tip to Tip)
6" - Shank Length (Without Nut & Barb)
5" - Thread Length
4-1/2" - Pass Through Length
Kegland Part number: KL01120
Replacement flow control shuttles for the Gen 2 NukaTap Flow Control faucet. These pieces are only for the flow control apparatus in the faucet, not the NukaShuttle itself. These pieces are backwards compatible with the Gen 1 NukaTap Flow Control model, replacing part numbers 11 and 12 in the diagram image above. KegLand Part Number: KL17817
The coupling nut is what attaches your beer faucet to the shank. This black coupling nut pairs perfectly with the NukaTap Stealth Bomber faucet without the need to purchase a whole new shank. Or add some flair to your existing setup by mixing and matching black and stainless steel.
Handle this part with care, as scratches will show up more clearly compared to the stainless versions.
KegLand Part Number: KL20275
Designed specifically for mounting the NukaTap Mini Beer Faucet on any kegerator, keezer, cold room wall, or other flat surface Connect beer line directly to the faucet, reducing the amount of temperature loss to a standard draft shank No spinning faucets. Your tap will remain in a fixed orientation once locked into the collet Easy installation. No need to drill a large hole through your fridge to accommodate a standard 5/8" draft shank Use with 6.35 mm OD EVABarrier draft tubing This shank kit is specifically designed to suit the NukaTap Mini Beer Faucet and will allow you to connect the NukaTap Mini to a cooler box, kegerator, keg fridge, cold room wall or any other flat surface. This wall mount shank kit is for use with 6.35 mm OD EVABarrier. For the shank kit for use with 8 mm OD EVABarrier, see here. New Innovative Shank Design Unlike other shank kits, this kit doesn't use a bulky 5/8" threaded shank. The issue with a standard draft shank is that acts as a heat sink, and due to the fact that most shanks sit inside an insulated wall, this results in a substantial amount of warm beer coming out of the tap before cold beer starts flowing. This results in substantial "first pour foam" effect which wastes beer, can result in sour beer, and ultimately negatively effects the quality of the beverages being served. This new design has the beer line feed all the way directly up to the back of the faucet, greatly reducing the volume of non-refrigerated beer. No Spinning Shanks If you have ever installed a traditional 5/8" long shank, you will know how frustrating it is when you use the faucet and it starts rotating. This new design of shank alternative uses three screws that lock the tap into a fixed position and prevents the taps from rotating. If you loosen the 1/2" stainless tap collet you can still have the flexibility to rotate the faucet to any orientation, but once the collet is tight, interlocking teeth on this shank kit and the NukaTap Mini will hold the tap permanently in the correct orientation. Easy Installation Another advantage compared to standard shanks is that this kit doesn't require you to drill a large 3/4"-1" hole through the wall. As no shank is required, only a hole large enough to accommodate the beer line is required. As a result, an 8mm (5/16") conventional drill bit is all that is necessary for installation. However, if you are concerned about the small amount of beer sitting in the draft line inside the wall not being refrigerated, you can also shell out a larger diameter of foam on the inside of the wall to allow cold air to circulate around the beer line thus reducing the non-refrigerated beer in the line even more. If you wanted to do this the Step Drill Bit is the best tool for the job. Any Wall Thickness Other shank kits will require you to purchase a specific length shank for a specific wall thickness. This new shank alternative will fit any wall thickness. If you have wall thicknesses that are less than 2.7" thick then you can use the included screws that have "snap off" points so you can simply cut the screws down to the desired length. However, if the wall is thicker than 2.7" you can simply purchase a conventional screw from the hardware store and screw the shank kit to your wall. If the substrate is firm enough you may not even need to go all the way through the wall so a common 1-1/4" long screw may be all that is required. Specifications: Beer Line Diameter: 6.35 mm OD EVABarrier Collet and Screw Cover: 304 Grade Stainless Steel O-ring Material: Dual O-ring Silicone/EPDM combination Plastic Mounting: Polyketone (POK) Temperature Range: 14-212°F (-10-100°C) Max Pressure: 150 psi KegLand Part Number: KL32193
Replacement lever collar for Intertap or NukaTap faucets. This beer faucet part threads onto the lever and sits above the friction bonnet. Used to help adjust your tap handle to face forward if it is oriented at an angle when fully threaded onto the faucet lever.
Perfect for mobile draft dispensing with the NukaTap Mini Beer Faucet Clamp onto a picnic bench or folding table—an ideal option for backyard cookouts or concerts in the park Makes for a great temporary shank for weekend getaways, camping, or tailgating This bracket is compatible with table or bench edges that are up to 3.5" thick. It can be adjusted to have the wing nut clamp in either direction, simply unscrew the flange piece from the threaded rod, then unscrew, then thread from the opposing side. Please note: This item does not include the Mini NukaTap or Shank pieces. It is simply the stainless steel bracket. Recommended Accessories: NukaTap Mini Faucet (D1598) Wall Mount Shank Kit w/ 6.35 mm Duotight (D1598D) Self Closing Spring (D1598A) 6.35 mm OD EVABarrier Tubing (D1723C) KegLand Part Number: KL0407
Turn your NukaTap faucet into a quick-connect point for your Duotight lines. This small adapter pushes into the NukaTap spout and gives you an 8mm (5/16 in.) barb that accepts any Duotight push-in fitting. You can run tubing straight from the faucet, with no clamps, no tools, and no need to reach inside the kegerator.
Great for:
Line cleaning: Connect a cleaning pump or keg of cleaner directly at the faucet to flush lines quickly while using less solution.
Filling bottles and growlers: Attach a length of tubing or a bottle filler for cleaner, lower-foam fills of take-home beer.
Closed transfers: Move beer from the tap into a mini keg or growler without opening the fridge or swapping disconnects on the keg posts.
Fits every NukaTap model, including Standard and Flow Control faucets.
Tip: Apply a little food-grade keg lube to the silicone O-rings so the adapter slides into the spout easily and seals well.
KegLand Part Number: KL39369
Replacement flow control shuttles for the Gen 1 NukaTap FC model faucet (D1584). These pieces are only for the flow control apparatus in the faucet, not the NukaShuttle itself. A backwards compatible replacement shuttle for the Gen 2 NukaTap Flow Control Faucet is coming soon. KegLand Part Number: KL17817