Free shipping on orders over $79!

Homebrew Tubing & Hose Clamps

Homebrewing Silicone & Vinyl Tubing & Hose Clamps

High temperature tubing is required to transfer liquids throughout your brew day.  Whether you're recirculating your mash, sparging, or transferring your wort to the fermenter, you're going to need tubing!  We offer an excellent selection of high quality transfer tubing.  Our high temperature silicone tubing is our favorite tubing for hot liquid transfers, while our vinyl tubing is great for racking your beer after fermentation, either to your keg, bottling bucket, or secondary fermenter.

49 products

  • Tubing - Reinforced Vinyl (5/8 in) - PLACEHOLDER

    Vinyl Tubing (Reinforced) - 5/8 in.

    Our reinforced vinyl tubing is an excellent option for transfering liquids under 158F that require some pressure resistance. A common application for the reinforced vinyl tubing is the in & out lines to your wort chiller.  This tubing is 5/8" inner diameter, is approved to 158F, and can handle working pressures up to 250 PSI.  

    $9.99 - $399.99

  • Hose Clamp - 1 1/4" to 2 1/8"

    Hose Clamp | 1-1/4" to 2-1/8" OD Tubing Clamp | Flathead Adjustment Screw | Stainless Steel

    Heavy-duty hose clamp suitable for 1-1/4" to 2-1/8" OD tubing Effective and removable Easily adjusted with a flathead screwdriver Made from stainless steel A heavy duty hose clamp for large OD tubing. As effective as a pre-formed clamp but without the expense or permanence.

    $2.99

  • S/S Hose Clamp w/ Thumb Screw - Blue - 2-3/8 inch S/S Hose Clamp w/ Thumb Screw - Blue - 2-3/8 inch

    Butterfly Hose Clamp - 2 3/8 in.

    Functions the same as a standard Hose Clamp, however rather than needing to find a screwdriver (or dime!) for every adjustment you can easily tighten by hand. As an added bonus, this also has a significantly smoother inside to the clamp, which will not tear up your tubing nearly as much as a standard hose clamp! Ideal for situations where you need to remove tubing from fittings to sanitize.

    $2.99

  • Stainless Steel Butterfly Hose Clamp - 21-38mm - 0.8-1.5 in. Stainless Steel Butterfly Hose Clamp - 21-38mm - 0.8-1.5 in.

    Stainless Butterfly Hose Clamp | 5/8" to 1.5"

    This stainless steel butterfly hose clamp is perfect for use with braided/reinforced silicone tubing. The butterfly thumb screw allows for toolless tightening and untightening, so you can build out or break down your system without rummaging through the toolbox for the right screwdriver. Fits 5/8" to 1.5" OD tubing. Actual size of the clamp is 21-38 mm (0.82" - 1.49"). KegLand Part Number: KL24440

    $2.79

  • Tubing - GoodYear Nutriflex (1 in) - PLACEHOLDER

    GoodYear Nutriflex Tubing - 1 in.

    Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F. Inner Diameter - 1" Outer Diameter - 1.33"   Please Note: Made to Order lengths have a lead time of approximately 2 weeks.    

    $44.99 - $369.99

  • Hoffman Clamp - Stainless Steel Hoffman Clamp - Stainless Steel

    Stainless Steel Hoffman Clamp | Flow Control Pinch Clamp for Flexible Tubing | 30mm | 1"

    Hoffman Clamps, or screw compressor clamps, are used to control the flow in flexible tubing. The clamp has a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. This can be particularly useful when regulating the flow of sparge water, collecting sweet wort from your mash tun, or liquid management applications of a still. Max Tubing OD: 30mm / 1.18" KegLand Part Numbers: KL37891

    $6.59

  • Tubing - GoodYear Nutriflex (1.5 in) - PLACEHOLDER

    GoodYear Nutriflex Tubing - 1.5 in.

    1 review

    Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F. Inner Diameter - 1.5" Outer Diameter - 1.88"    

    $69.99 - $449.99

  • Tubing - Reinforced Silicone (7/8 in ID) - PLACEHOLDER

    High Temp Silicone Tubing | Reinforced | 7/8" ID

    Reinforced silicone tubing offers higher temperature tolerances and chemical resistance while remaining flexible and easy to handle. Ideal for both cold side and hot side processes and high-pressure applications. Although braided, the tubing remains transparent to allow you to visually inspect the flow of liquids. The tubing inner diameter is slightly undersized at 22mm or 0.86". 0.86" (22mm) inner diameter 1.25" (32mm) outer diameter Odorless, tasteless and inert Polyester heat resistant fiber reinforcing braid Good electrical and weatherability properties Resists UV, Ozone, gases, and moisture Working Temperature: -76°F–500°F Working Pressure: 0-150 psi KegLand Part Number: KL25294

    $96.99 - $267.99

  • Tubing - GoodYear Nutriflex (2 in) - PLACEHOLDER Tubing - GoodYear Nutriflex (2 in) - PLACEHOLDER

    GoodYear Nutriflex Tubing - 2 in.

    Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F. Inner Diameter - 2" Outer Diameter - 2.43"    

    $89.99 - $549.99

  • Hose Clamp - 2 1/4" to 3 1/8"

    Hose Clamp | 2-1/4" to 3-1/8" OD Tubing Clamp | Flathead Adjustment Screw | Stainless Steel

    Heavy-duty hose clamp suitable for 2-1/4" to 3-1/8" OD tubing Effective and removable Easily adjusted with a flathead screwdriver Made from stainless steel Stainless steel screw clamp. High quality. Fits tubing with an outer diameter between 2.25 and 3.125 inches.

    $3.49

  • Tubing - GoodYear Nutriflex (3 in) - PLACEHOLDER

    GoodYear Nutriflex Tubing - 3 in.

    Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F. Inner Diameter - 3" Outer Diameter - 3.56"  

    $169.99 - $1,099.99

  • Hose Clamp - 2 3/4" to 3 5/8"

    Hose Clamp | 2-3/4" to 3-5/8" OD Tubing Clamp | Flathead Adjustment Screw | Stainless Steel

    Heavy-duty hose clamp suitable for 2-3/4" to 3-5/8" OD tubing Effective and removable Easily adjusted with a flathead screwdriver Made from stainless steel Strong stainless screw clamp that fits tubing with outer diameter between 2.75 and 3.625 inches.

    $3.99

  • Tubing - GoodYear Nutriflex (2.5 in) - PLACEHOLDER

    GoodYear Nutriflex Tubing - 2.5 in.

    Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F. Inner Diameter - 2.5" Outer Diameter - 3.05"  

    $155.99 - $999.99

Login

Forgot your password?

Don't have an account yet?
Create account