From simple bottle filling wands, to high tech counter pressure bottle filling machines, we have it all! If you will be bottling from a bucket, one of our bottle filler wands would be perfect. If you plan on bottling homebrew that is already carbonated (from a keg or brite tank), you'll need to use one of our counter pressure filling options.
Add convenience and reduce the mess of bottling with this bottling wand!
Say goodbye to the days of just running a tube from your bottling bucket's spigot into the bottom of the bottle. A bottling wand starts its flow when you press the wand tip against the bottom of the bottle, and stops when you lower the bottle away from it. No more having to fiddle with the spigot during bottling, and no more mess from the dripping hose between bottles!
What does this bottle filler have that the rest don't? A removable tip and spring that make this model easy to sanitize. Plus, the nozzle spring can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12 inches long.
The plastic end fits nicely into our FE346 spigot, or it can be removed to attach 3/8" ID tubing.
Perfect for use as a 5-gallon batch beer fermenter or bottling bucket
Inlcuded plastic spigot for easy gravity transfers or attaching a bottle filling wand
Sediment blocker on the spigot's back locking nut helps minimize trub pickup when racking out after fermentation
Once you've upgraded to a carboy or other fermenter, the bucket will remain a reliable brewing tool for cleaning and sanitizing purposes
External volume markers provide a convenient reference point when filling the bucket with water to make cleaner or sanitizer solution
A six gallon food grade bucket for fermentation or bottling with a built in spigot and external volume markings up to five gallons. Outlet barb accepts 3/8" ID vinyl tubing. To use as a fermenter you will need to pick up the optional lid, stopper, and an airlock. Includes our new Sediment Block Spigot, which will help minimize trub uptake as you rack after fermentation. If using this as a bottling bucket, simply rotate the spigot to maximize product output. Spigot includes gasket and sediment blocking lock nut and can easily be removed for cleaning and sanitizing.
If you use the bucket for fermentation be sure to use care when cleaning. Do not use any abrasive pads that would scratch. Once you get a scratch in a plastic bucket it is very hard to sanitize. This is also why we don't recommend storing equipment in a bucket between uses as a fermenter. A hot PBW soak is often a perfect way to clean a bucket, followed by a Star San soak for killing bacteria.
Bucket has external volume markings up to 5 gallons. 17.5" H x 12" Ø
Please Note:
Buckets are translucent and do not come with lids
Buckets are not designed to hold pressure
Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage
Food-Grade to 180°
This Spigot can be easily installed onto any bucket for added convenience.
Drill a 1" hole and install in bucket with the gasket against the exterior of the bucket.
Spigot uses 3/8 in ID tubing.
The Tapcooler Counter Pressure Bottle Filler is an all-new, easy-to-use bottling device!
Allows you to perfectly bottle beer from a forward-sealing beer faucet without CO2 loss
Purge bottles and headspace with CO2 to keep oxygen out, prolonging the life of your beer
Perfect for bottling for competitions, sending bottles home with friends, or to take on the go!
Easy to setup and super easy clean.
For a Duotight-compatible filler, check out the NukaTap Counter Pressure Bottle Filler
The Tapcooler Counter Pressure Bottle Filler is the best way to quickly and easily fill bottles of homebrew directly from your draft system. No need to mess with alternate liquid lines or other complex contraptions. Just slide the Tapcooler into any forward sealing faucet (such as a Perlick, Intertap, or Nukatap) hook up a CO2 line, and you're ready to roll. Whether you're filling bottles for a competition or just grabbing a couple to share with your friends, the Tapcooler is quick and easy to use, and will help maintain the flavor, aroma, and carbonation level of your beer so it tastes the same out of the bottle as it would out of the tap.
A counter pressure bottle filler is the best tool for bottling, as the bottle is under pressure while the carbonated beer flows in, which results in a minimal loss of the CO2 in solution.
The Tapcooler improves upon the standard counter pressure filler, as it plugs directly into your draft faucet. Other counter pressure solutions require you to hook up a separate liquid line, which is not something standard draft systems have setup and requires additional time to prep. With the Tapcooler, you can have it setup and ready to go in less than a minute! The Tapcooler design is also advantageous because after you are done filling the bottle, it stays in place hooked up to your faucet while other fillers require you to set the unit aside and pick it back up again for the next bottle.
Connecting your CO2 line is also a snap. You can either hook up directly with a 3/16" push-fit line, or connect your line to the included barb fitting. You can also purchase the gas ball lock adapter (KEG881), which gives you the ability to attach a gas-in disconnect directly to the filler unit. We highly recommend picking up this optional accessory!
The Tapcooler is designed to fill beer and CO2 from the bottom of the bottle through the telescoping bottle connection tube. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you open the tap and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and little to no foam during the filling process.
The telescoping bottle connection tube allows you to fill bottles as small as 4.5" tall and up to 12.5" tall. You can fill taller bottles with the Tapcooler, but the tube will not reach the bottom of the bottle, which can lead to some splashing. When filling wide mouth containers, a bottle stopper of suitable size and with a 9 mm hole can be used as an adapter.
The filler features a push button CO2 purge valve, which allows you to purge the bottle of oxygen before and after filling. It also includes an adjustable pressure relief valve, giving you the ability to change the filling speed. The pressure relief valve also acts as an overflow port for excess beer or foam to escape when filling.
One of the best features of the Tapcooler is that it's super easy to clean. Cleaning other bottle fillers can be a chore and take lots of time. The Tapcooler comes apart easily and allows you to clean all parts effectively and easily after each use.
All metal parts that come into contact with your beer are made from 304 stainless steel. The barb and ball lock CO2 adapters are made of aluminum.
Finally, the Tapcooler comes chock full of optional accessories that will adapt your filler perfectly to your setup. See the "You Might Also Need" section below for list of accessories!
Forward-Sealing Faucet Compatibility
Tapcooler fits Intertap, Nukatap, Ultratap, Vent-Matic, and Perlick 600 series faucets. These fillers can be converted to fit Perlick 500 series with the optional tap connector (KEG887). Cannot be used with ventilated beer taps, i.e. non-forward sealing beer taps.
Features:
Hooks up directly to any forward sealing faucet for quick and easy use.
Quick setup and easy maintenance.
Perfect for bottling for competitions, sending bottles home with friends, or just to have some bottles on the go!
A range of accessories are offered for more range and easier use!
Purge bottles with CO2 before and after filling for longer lasting beer!
Pressure relief valve allows for control over filling speed and allows excess foam to escape for the perfect pour every time!
Made from 304 stainless steel
Easy to use and clean!
With this handy adapter, you can easily connect a gas ball lock fitting to your Tapcooler Counter Pressure Bottle Filler! The ball lock adapter inserts into the push fit CO2 connector on the filler unit so that a gray ball lock disconnect can be connected. This is highly recommended accessory for the Tapcooler filler to make bottling quick and easy.
Unlike standard low-end bottle fillers, the Vintage Shop's springless model uses a plastic valve instead of a spring to seal. The springs are not made from a food grade quality metal. Fillers will work with 12 or 22oz bottles. Use with 3/8" tubing.
The counter pressure bottle filler that sets the standard for filling beer bottles at home. With a unique one way valve and adjustable pressure relief you will be bottling sediment free homebrew with ease.
If you currently carbonate and store your homebrew in kegs, you can use a counter pressure filler to bottle beer directly from your kegs. One huge advantage of this method is that since you are bottling already carbonated, clear beer, there will be no sediment at the bottom of your bottles.
Counter pressure bottle filling is how a brewery bottles beer. The bottle is under pressure while the carbonated beer flows in. Because the interior of the bottle is pressurized there is minimal loss of the CO2 in solution. The opposite of filling under pressure is when you pour a beer into a pint glass where CO2 erupts out of solution creating all that foam. Great in your glass but not good when you are trying to bottle carbonated beer. Our counter pressure filler mimics a single filling head on a professional bottling line, a concept that we all know works very, very well.
Made by Fermentap, the design has two unique features. Number 1 it is the only model made entirely from stainless steel. Number 2 you flush and fill from the bottom of the bottle.
Beer barb is 3/16". Gas barb is 5/16".
Features While some models flush the bottle from the top and fill from the bottom, our unit features a special valve that allows CO2 and beer to flow down the same stainless tube, directly to the bottom of the bottle. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you switch the valve position and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and no foam during the filling process - not to mention that the whole thing takes one-hand to operate! Why hope that you flushed your bottle properly using a type of beer gun, when you can know for sure that you have created the best environment for your beer to be stored at by using a Counter Pressure Bottle Filler?
More Details
The unit is inserted into the bottle in the off position. The valve is then turned to CO2 to flush the bottle and then to beer for filling. The adjustable pressure relief on the side of the unit allows you control the speed of fill by adjusting the pressure in the bottle. The valve is positioned in such a way that it is easy to use with one hand, while the other holds the bottle. This model is designed for 12oz bottles but can easily be extended to accommodate larger bottles, such as 22oz, with a small piece of 1/4" tubing.
Setting Your PSI Pressure
Before you counter pressure fill a bottle make sure you are satisfied with the carbonation level and flavor. The goal for counter pressure bottle filling is to store your beer in the most sanitary and clean environment possible so when you get ready to share your homebrew its presentation is perfect when you go to pour.
An ideal set point to set your PSI level on your regulator is 10-14 psi. This range is dependent upon the temperature of your beer and the carbonation level. We recommend you start at a lower pressure around 10psi for the first 2-3 bottles to make sure you get everything dialed in before committing to filling a whole case.
Make sure your keg is always kept cold. If your keg warms up you will have foaming issues.
What does this bottle filler have that the rest don't? A removable tip and spring that make this model easily sanitized. Plus, the spring inside can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12 inches long.
We think our Counter Pressure Bottle Filler is the best on the market, and the Deluxe Counter Pressure Filler takes a proven design to the next level by adding a pressure gauge for monitoring bottle pressure and flared connections for easy cleaning.
The gauge on this counter pressure bottle filler allows you to know the pressure in your bottle, an incredibly handy feature. The flared connections allow for easy cleaning as you can connect on or disconnect your lines in a matter of seconds. Traditionally these lines can be difficult to sanitize because they were permanently connected with hose clamps.
Still has all the great feature of our original
All Stainless Construction (except for a brass backing on the pressure gauge)
A true Counter Pressure Filler (for less foaming)
Easy to use Stainless 3-way ball valve on top
Adjustable Stainless pressure release on side
Flushes bottle from the bottom not the top
What is a Counter Pressure Filler? If you currently carbonate and store your homebrew in kegs, you can use a counter pressure filler to bottle beer directly from your kegs. One huge advantage of this method is that since you are bottling already carbonated, clear beer, there will be no sediment at the bottom of your bottles.
Counter pressure filling is how a brewery bottles beer. The bottle is under pressure while the carbonated beer flows in. Because the interior of the bottle is pressurized there is minimal loss of the CO2 in solution. The opposite of filling under pressure is when you pour a beer into a pint glass where CO2 erupts out of solution creating all that foam. Great in your glass but not good when you are trying to bottle carbonated beer. Our counter pressure filler mimics a single filling head on a professional bottling line, a concept that we all know works very, very well.
Features While some models flush the bottle from the top and fill from the bottom, our unit features a special valve that allows CO2 and beer to flow down the same stainless tube, directly to the bottom of the bottle. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you switch the valve position and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and no foam during the filling process - not to mention that the whole thing takes one-hand to operate! Why hope that you flushed your bottle properly using a type of beer gun, when you can know for sure that you have created the best environment for your beer to be stored at by using a Counter Pressure Bottle Filler?
More Details
The unit is inserted into the bottle in the off position. The valve is then turned to CO2 to flush the bottle and then to beer for filling. The adjustable pressure relief on the side of the unit allows you control the speed of fill by adjusting the pressure in the bottle. The valve is positioned in such a way that it is easy to use with one hand, while the other holds the bottle. This model is designed for 12oz bottles but can easily be extended to accommodate larger bottles, such as 22oz, with a small piece of 1/4" tubing.
Setting Your PSI Pressure
Before you counter pressure fill a bottle make sure you are satisfied with the carbonation level and flavor. The goal for counter pressure bottle filling is to store your beer in the most sanitary and clean environment possible so when you get ready to share your homebrew its presentation is perfect when you go to pour.
An ideal set point to set your PSI level on your regulator is 10-14 psi. This range is dependent upon the temperature of your beer and the carbonation level. We recommend you start at a lower pressure around 10psi for the first 2-3 bottles to make sure you get everything dialed in before committing to filling a whole case.
Make sure your keg is always kept cold. If your keg warms up you will have foaming issues.
This simple drain tube will keep the mess to a minimum when using the Tapcooler Counter Pressure Bottle Filler! Attaches directly to the Tapcooler's PRV so overfill beer and foam can drain out to a bucket or nearby sink. Measuring 39" long, the end of the tube can be placed in a growler or other receptacle so you can keep filling bottles without spillage!
This 11-inch extension tube that hooks directly into an Intertap beer faucet! If you're draft setup features Intertap or Nukatap forward-sealing faucets, this extension tube will offer more flexibility and range when bottling with the Tapcooler Counter Pressure Bottle Filler! This extension tube has an Intertap/Nukatap faucet adapter that screws directly into the faucet on one end, and the other end hooks up to the Tapcooler unit so you can have a range of motion for bottling away from the faucet. A small silicone o-ring is provided to seal the connection between the filler unit and the connection hose.
Attachments are made from Stainless Steel and connected by food grade beverage tubing.
Tapcooler and faucet not included.
Bottle directly from your ball lock or pin lock keg with this optional Tapcooler accessory. Features a 1/4" swivel nut at one end to connect to a flared disconnect (not included) and a ball valve at the other. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball lock or pin lock disconnect into the included swivel nut set on the tubing, and hook up to your keg. The valve acts as the beer faucet normally would, starting and stopping flow directly from the keg. The attached tubing is 6.5 feet long, giving you plenty of versatility in your bottling range. Another great accessory from Tapcooler!
Tapcooler and ball lock disconnect not included.
Unlike standard low-end bottle fillers, the Vintage Shop's springless model uses a plastic valve instead of a spring to seal. The springs are not made from a food grade quality metal. Fillers will work with 12 or 22oz bottles. Use with 1/2" tubing. Larger 1/2" diameter and increased flow is good for wine applications.
Connects your new Counter-Pressure filler to your existing ball lock kegging system with a convenient, sealing quick-disconnect system. Having everything you need all in this kit makes set-up & use of your counter-pressure filler easier. If you have the Counter-Pressure bottle filler then this set is a must have!
Includes:
Hardware to connect filler to gas system: Gas line tee, quick disconnect set, 6' of gas line.
Hardware to connect filler to keg: Threaded, black Beverage-Out Quick Disconnect, related flare fittings, 5' of beer line.
To Install: Shut off your gas. Cut your existing gas line assembly and clamp the Co2 Tee in that place. Clamp the gas line and beverage line to the Bottle Filler. Gas line on the larger barb fitting, beverage on the smaller barb. Make sure the counter pressure filler is closed by placing the valve handle perpendicular to the valve. Attach the beverage ball lock quick disconnect to your keg. Never attach a beverage out fitting to your keg without it being in a closed system. Connect the gas line quick disconnect. Finally turn your gas back on. You're ready to fill.
Optional tubing extension allows the Tapcooler to be used away from directly under the faucet
Three length options to meet your setup needs
Comes with fittings, tubing, and o-rings needed to hook it up
Fittings are made of stainless steel connected by food grade beverage tubing
Give yourself some room to work with the Tapcooler extension tube. Not every draft setup is located at a convenient height or location to counter pressure fill your bottles. With the optional extension tube, you can set up your bottling run up to 6.5 feet away from your beer faucet. One end of the connection hose screws into the top of the filler unit and the other end of the tube is screws into the filler unit's removable tap nozzle insert. Includes two small o-rings to seal the extension line on either end.
Features:
Tubing (available in 3 different length options)
Stainless steel faucet fitting
Stainless steel Tapcooler fitting
Required o-rings for sealing purposes
Comes pre-assembled!
Tapcooler and faucet not included
Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.
Perfect for use as a 5-gallon batch beer fermenter or bottling bucket
Comes with a pre-drilled hole so you can pair it with the spigot of your choice—see recommended spigots below under "You Might Also Need"
Once you've upgraded to a carboy or other fermenter, the bucket will remain a reliable brewing tool for cleaning and sanitizing purposes
External volume markers provide a convenient reference point when filling the bucket with water to make cleaner or sanitizer solution
A six gallon food grade bucket for fermentation or bottling with a pre drilled hole and external volume markings up to five gallons. This bucket does not include a spigot. Our recommended spigots can be found below under You Might Also Need. To use as a fermenter you will need to pick up the optional lid, spigot, stopper, and an airlock.
If you use the bucket for fermentation be sure to use care when cleaning. Do not use any abrasive pads that would scratch. Once you get a scratch in a plastic bucket it is very hard to sanitize. This is also why we don't recommend storing equipment in a bucket between uses as a fermenter. A hot PBW soak is often a perfect way to clean a bucket, followed by a Star San soak for killing bacteria.
Please Note:
Buckets are translucent and do not come with lids
Buckets are not designed to hold pressure
Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage
Food-Grade to 180°F
If you have an old school 500-series Perlick faucet, this adapter will allow you to hook up the Tapcooler Counter Pressure Bottle Filler to your draft system. The adapter threads onto the Tapcooler, replacing the regular fitting so the unit can be used with these older Perlick faucet models. A must-have accessory if you're a 500-series owner!
Automated Filling System: Fill any beverage into any bottle, can, jar, or glass automatically with this internet-connected, RAPT-enabled Cannular Can and Bottle Filler, offering a more sanitary and user-friendly experience than competitors.
Integrated Pinch Valve and Regulator: The pinch valve allows easy removal of the beer line for cleaning, while the integrated regulator eliminates the need for an external regulator, preventing damage from high-pressure gas sources.
OLED Digital Display and WiFi Connectivity: The OLED display simplifies calibration and allows real-time adjustments, while WiFi connectivity to the RAPT.io portal logs usage data and enables remote management of settings and profiles.
Versatile and Multi-Purpose: With adjustable stainless steel tubes and a height range suitable for bottles up to 11.8" and cans up to 10.6", this filler can handle still or carbonated beverages, making it ideal for various containers including wine bottles, beer cans, and more.
Low Dissolved Oxygen (DO) Pickup: The filler effectively purges oxygen from the container, ensuring substantially lower dissolved oxygen levels, which enhances the quality and longevity of your beverage.
Fill any beverage into any bottle, can, jar, or glass automatically with this internet-connected, RAPT-enabled, Cannular Can and Bottle Filler. Featuring two adjustable stainless steel tubes, the Cannular Filler will use one to purge oxygen out of the vessel and then use the second one to fill the vessel to a precise level based on an internal pressure sensor.
OLED Digital Display
The OLED display makes calibration super easy. It also enables you to keep track of filling speed, number of cycles/fills, purge time, fill height, and also enables you to make on-the-fly adjustments to your filling requirements so you can conveniently tweak the settings while filling.
Integrated Ball Lock Connectors
The integrated ball lock connectors allow you to quickly attach your beer and gas ball lock disconnects. We recommend the use of the Duotight Ball Lock Quick Disconnects in Gas and Liquid to connect to these inputs and outputs.
Integrated Pinch Valve
The integrated pinch valve is one of the things that makes this unit far superior to other filling machines. The pinch valve enables you to easily remove the beer line for cleaning so the stainless tube, silicone hose, and yellow ball lock cap removes completely and can be put into the dishwasher or cleaned in the sink. The pinch valve is mechanically simple and therefore reliable. It is not subject to small particles like hops getting stuck in the device and eliminates the need for pre-filtration. It simply pinches down on the silicone tube to shut off the flow. This design also enables laminar flow that reduces foaming. The pinch valve improves reliability, makes it easier to operate, and a piece of cake to clean.
Integrated Regulator
Other filling machines require an external regulator that may need to drop the pressure lower than your normal keg dispensing pressure. Unlike these other fillers, this filler has an integrated regulator which saves time and setup costs. This integrated regulator means you will not damage your machine by accidentally connecting it to a high-pressure gas source. You can hook up your gas line without the need for another external regulator or to fool around with your gas supply at all. Just set the integrated regulator once during setup and forget about it.
Multi-Purpose
The long stainless tubes and adjustable height make this device useful for pretty much any bottles up to 11.8" (30cm) high or cans up to 10.6" (27cm) high. It can also be used for still or carbonated beverages, so this device is useful for wine bottles, beer cans, champagne, crown seal bottles, and pretty much any other bottle/can/vessel that has a neck opening greater than 0.59" (15mm). It can also be used for filling glasses, jars, or other vessels.
Fill Profiles
Some other machines require a full calibration to change from one vessel type to another. This machine allows you to pre-save fill profiles depending on what you are doing. Save a filling profile for your 12 oz cans and then save a different filling profile for your 750mL wine bottles. Use our pre-saved presets or alternatively make your own fill profiles with different purge times and fill height. These are also synced with the RAPT.io portal so you can save profiles and share them with friends or deploy them to several other devices.
RAPT.io Connected (via WiFi)
As well as all the features above, this filler connects to your WiFi and keeps track of your Cans Per Minute (CPM), fill speed, and even temperature (if you purchase the external Instant Read Temperature Probe separately). It will log all usage information so you can keep track of how your machine is running or even keep track of your staff to make sure they are cycling the machine at an acceptable rate. The connectivity to the RAPT.io portal will enable you to more easily change settings, update profiles, and keep track of your fill days so you can historically keep track of how your fill day went and which day you processed each batch.
Low DO Pickup
The quality and longevity of your beverage are often defined by how well you keep oxygen off your product. This filler purges the oxygen out of the can and will enable you to get substantially lower dissolved oxygen.
Wall Mounted Design
This type of can and bottle filler has primarily been designed for wall-mounting configuration. This allows you to bring a can or bottle up to the filler from the underside of the unit. To wall mount this unit you can download and print this template.
24V DC Power Supply
KegLand Part Number: KL37785
The Ferrari auto bottle filler is a great economical bottle filler option. This unit will automatically stop when the bottle is full. No more messes from accidentally overfilling your bottles. Their patented design is one of the best on the market at a price that can't be beat!
Allows you to mount your Tapcooler bottle filler to any magnetic surface, like the side of your kegerator or keezer
Provides effortless handsfree filling, while you get ready to fill the next bottle
Works with all versions of the Tapcooler
Extra strong dual pot magnets on the back provide a sturdy operating setup
Already own a Tapcooler, and want a better and more efficient way to fill your bottles with it? Then look no further than the Magnetic Handsfree Mount for the Tapcooler. This accessory allows you to mount your Tapcooler to the side of any magnetic surface (like your kegerator or keezer) to enable handsfree filling, bottle after bottle. No more having to hold onto the Tapcooler while filling. With this, you can setup the bottle, begin filling, and then use your free hands to get ready for the next bottle. Get the handsfree mount for your Tapcooler today, and make filling your homebrew bottles even MORE fun (if that was possible)!
NOTE: You'll need to use the Beer Valve Connector, Intertap Extension Tube, or Faucet Extension Tube to use the handsfree mount. These items are all sold separately, so make sure to grab one if you don't have one already.
This item is the handsfree mount only. The Tapcooler bottle filler and extension tubes are all sold separately.
The Tapcooler Nanocanner™ magnetic bracket mount allows you to setup the can filler on almost any magnetic surface, like the side of your kegerator! While the magnets are small and compact, they are hella strong! Each bracket has two pot magnets with a weight rating of 60 lbs. each! That's a lot of weight for two small magnets!
You can also hook multiple mounts together to create an even bigger can filling setup. Why fill one can at a time, when you can do four!?
Premium Counter-Pressure Bottle filler that is designed for the smaller craft brewer or dedicated homebrewer to help make bottling day faster and more efficient
The four separate filling heads have individual Stainless Steel 3-way control valves that allow for quick fill rates
Only requires one person to operate
A single PRV provides equal backpressure on all heads resulting in matching flow rates without adjustment
Individual purge valves on each fill head allow for nearly all oxygen removal in a bottle, ensuring that the beer stays fresh for longer
The removable drip tray is fully draining with a barbed outlet for constant filling and easy cleaning
A purge valve on the reservoir helps make sure that foam never builds up
304 Stainless Steel Construction and easy-to-use functionality, all resulting in a top-of-the-line bottle filler
Introducing the newly redesigned and updated G2 Medusa Multihead Counter Pressure Bottle Filler! This unique unit was designed in-house by the MB Pro Engineering team and purpose built for the smaller craft brewer or dedicated homebrewer. The Medusa will speed up bottling day while also reducing exposure to oxygen during the bottling process, resulting in higher quality beer with a longer shelf life.
The Medusa Multihead Counter Pressure Bottle Filler can be adjusted to cater all bottling needs. All four heads can be operated individually, and the height, back pressure, and fill speeds can be adjusted for various bottle styles. We've done our best to pack this unit with features that will handle all jobs, while keeping costs as low as possible.
Features:
3-way stainless steel valves on both inlet & back pressure sides of all fill heads.
Improved Pressure Relief Valve has higher accuracy over fill rates, and directs foam into the drip tray rather than onto your bottles.
Robust stainless steel frame stands on its own or can be easily bolted or clamped to a work surface
Stainless steel fill reservoir keeps fill rates equal & reduces foaming
Inverted fill tubes & reservoir purge means cleaner filling with even less possibility for foam.
Dual TC Fill reservoir is easier to clean & allows for upgrades down the road (as they become available).
Easily adaptable to fill from nearly any pressurized vessel.
Height is adjustable from shorty bottles to growlers.
Easy disassembly for cleaning, storage & maintenance,
Sanitary 1.5" TC inlet for beer (Clamp and Gasket sold separately)
3/8" tube connection for CO2.
Backpressure Bar allows for a single adjustment point for fill rates. No more adjusting PRVs on each fill head.
Minimum Bottle Height: 6.9"
Maximum Bottle Height: 16.5"
Maximum Working Pressure: 15 PSI
Dimensions:
Footprint: 26-3/8" L x 8" W
Drip Tray: 23-1/2" L x 5-1/2" W
Overall Height: 25-3/8"
Please Note: Filler valves include a Teflon gasket. Do not soak the valves in PBW which can corrode Teflon material after prolonged contact.
Suitable for carbonated beverages such as beer and kombucha
Purges with CO2 prior to filling
Adjustable shelf to accommodate cans up to 11.5" tall and 4" in diameter
Made to order in the United States
The XF2200 can filler is designed for the Artisan Craft Person looking to fill cans with carbonated beverages in a simple and affordable manner.
The filler can accommodate most cans sizes with its adjustable shelf, allowing great flexibility, and is suitable for carbonated beverages such as beer and kombucha. The XF2200 is based on the XpressFill Level Filler with modified valves and flow path diameters resulting in a much better flow of product with less foaming and better CO2 retention.
The filler will accommodate cans up to 4 inches in diameter and up to 11.5 inches tall.
Each filler is hand built to order in the California factory. Lead times average about 3 weeks.
Features & Specifications:
360 cans per hour capacity (12 oz)
All materials in the beverage flow path are FDA certified as food grade for contact with alcohol
Purges with CO2 prior to filling
Includes silicone tubing to fill from bottom
Maximum Can Dimensions: 4" D x 11.5" H
Maximum Operating Pressure: 12 psi
Weight: 22 lbs
Dimensions: 12" wide x 17" high x 15.5" deep
Requires 0.7A of 115V 50/60Hz power
Counter pressure can filler for carbonated beverages
CO2 purge cycle prior to fill reduces head space O2
Flow stops automatically at the desired height
Suitable for standard 12 oz and 16 oz cans as well as tall 19.2 oz cans
Made to order in the United States
The XF4500C counter-pressure can filler is designed for the Artisan Craft Person looking to can carbonated beverages in a simple way. The carbonated beverage filler is a counter pressure can filler that fills cans from a pressurized source, such as a keg, without losing carbonation; using a sensor probe that shuts off the fill at the desired height. This filler was designed to be technically sophisticated, while operationally very simple.
Even though this machine is designed for carbonated beverages, such as beer and kombucha, it can also be used for still products, using a pressurized keg or pump.
The XF4500C can be used with can sizes that have the standard 12 and 16 oz lid opening, including tall 19.2 oz cans, allowing great flexibility. The XF4500C requires that you also have an air compressor, which is used to hold the can rest in place, a canister of CO2, to pressurize and carbonate your tank or keg, and a pressurized container, to allow your product to flow from high to low pressure, through the machine.
Each beverage filler is hand built to order in the California factory. Lead times average about 3 weeks.
Features:
One-person, ergonomic canning operation
Adjustable fill height and level sensor for consistent filling
Adaptable to various can sizes
Easy to clean
CO2 purge cycle prior to fill reduces head space O2
Greatly reduce product waste from overfill
Can be used for both nitrogenated and carbonated products
Light, stainless steel and anodized aluminum construction
All materials in the beverage flow path are FDA certified as food grade for contact with alcohol
Specifications:
Applications: beer, kombucha, soda, sparkling wine, cider
Capacity: 360 cans per hour (12 oz)
Weight: 40 lbs
Dimensions: 16" wide x 21" high x 15" deep
Requires 2.0A of 115V 50/60Hz power
Finally--a multi-head Counter Pressure filler at an affordable price point!
The Micro Filling Systems 4 Head Counter Pressure Filler works similarly to any other counter pressure filling device out there, but with greater ease and at a fraction of the cost of a custom built manual system or the semi and fully automated systems. Designed with the single worker in mind, our system requires only the minimum amount of handling per bottle.
Unlike most other manual models where all the bottles are loaded at once and then the filling unit is clamped down on them before the filling process can begin, the Micro Filling Systems 4 Head Counter Pressure Filler allows the worker to load from the bottom and fill each bottle individually and immediately. This allows some bottles to be filling while others are being loaded, thus reducing down time as the worker no longer has to wait for all the bottles to be filled before pulling them off the system to be capped. This workflow dramatically increases the number of bottles you can fill per hour! The height of the filling heads is easily adjusted by loosening a knob on either side of the unit and moving it up or down to fit a variety of bottle sizes and even growlers. Please note that growlers will require a larger diameter bung--please measure your growler's mouth diameter and find the appropriate bung here.
Key Features
4 head manual counter pressure bottle filler with individual actuating stainless steel filler heads.
3 way stainless steel valves with purge, fill and off positions.
Stainless steel pressure relief valves to fine tune filling rates.
Easily removable stainless drip tray with barbed drain fitting for tube attachment.
HDPE mounting points to allow unit to be clamped or bolted to any desired surface.
Food grade liquid and gas lines with stainless fittings and tees.
Attachable to any carbonated beer, gas and cleaning solution source using many standard fittings.
Fully adjustable height control to allow filling of many different bottle sizes (or even growlers!).
Units are easily disassembled for servicing or additional cleaning.
1/4" Barbed inlets for both gas and beverage supply.
See the filler in action at Strange Land Brewing Company in Austin, TX!
Counter pressure bottle filler for carbonated beverages
Flow stops automatically at the perfect height in the bottle neck every time, regardless of bottle variations
Accommodate bottles up to 13.5" tall and up to 4" in diameter
Made to order in the United States
The Carbonated Beverage Filler is a counter-pressure machine that fills bottles with pre-carbonated beverages without losing carbonation; The XpressFill Carbonated Beverage Filler uses a high-tech sensor probe that shuts off the fill at the perfect height in the bottle neck every time, regardless of bottle variations.
Even though this machine is designed for carbonated beverages, it can also be used for still products as long as they are fed to the filler using a lightly pressurized keg or pump. That means that you can use this for your normal bottling as well as for those special bottle-conditioned beers too!
The Carbonated Beverage Filler is also suitable for filling Charmat-style sparkling wines, at a maximum operating pressure of 60 psi.
The filler will accommodate bottles up to 4 inches in diameter and up to 13.5 inches tall. This covers most standard sized 12 oz, 22 oz and 750 mL bottles.
Each bottle filler is hand built to order in the California factory. Lead times average about 3 weeks.
Features & Specifications:
200 Bottles per Hour capacity (12 oz)
All materials in the beverage flow path are FDA certified as food grade for contact with alcohol
Maximum Bottle Dimensions: 4" D x 13.5" H
Maximum Operating Pressure: 60 psi
Weight: 32 lbs
Dimensions: 16 inches wide x 17 inches high x 15.5 inches deep
Requires 1.5A of 115V 50/60Hz power
Counter pressure bottle filler for carbonated beverages
Flow stops automatically at the perfect height in the bottle neck every time, regardless of bottle variations
Accommodate bottles up to 13.5" tall and up to 4" in diameter
Made to order in the United States
The Carbonated Beverage Filler is a counter-pressure machine that fills bottles with pre-carbonated beverages without losing carbonation; The XpressFill Carbonated Beverage Filler uses a high-tech sensor probe that shuts off the fill at the perfect height in the bottle neck every time, regardless of bottle variations.
Even though this machine is designed for carbonated beverages, it can also be used for still products as long as they are fed to the filler using a lightly pressurized keg or pump. That means that you can use this for your normal bottling as well as for those special bottle-conditioned beers too!
The Carbonated Beverage Filler is also suitable for filling Charmat-style sparkling wines, at a maximum operating pressure of 60 psi. The XF4500 requires that you also have an air compressor, which is used to hold the bottle rest in place, a canister of CO2, to pressurize and carbonate your tank or keg, and a pressurized container, to allow your product to flow from high to low pressure, through the machine.
The filler will accommodate bottles up to 4 inches in diameter and up to 13.5 inches tall. This covers most standard sized 12 oz, 22 oz and 750 mL bottles.
Each bottle filler is hand built to order in the California factory. Lead times average about 3 weeks.
Features & Specifications:
400 Bottles per Hour capacity (12 oz)
All materials in the beverage flow path are FDA certified as food grade for contact with alcohol
Maximum Bottle Dimensions: 4" D x 13.5" H
Maximum Operating Pressure: 60 psi
Weight: 40 lbs
Dimensions: 16 inches wide x 21 inches high x 15.5 inches deep
Requires 1.5A of 115V 50/60Hz power
What does this bottle filler have that the rest don't? A removable tip and spring that make this model easily sanitized. Plus, the spring inside can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12" long.
Upgrade the existing base of the Tapcooler Canning Station with this sleek drip tray
Integrates seamlessly with the canning station
Any spills are collected in the drip tray and routed out the back via the included drain tube attachment
Canning is fun, but it can be messy. Cut down on the mess with this drip tray upgrade attachment for the Tapcooler canning station. This drip tray replaces the stock circular base that comes with the Tapcooler canning station. The sleek design gives you a slightly wider footprint to put the can on. After filling is complete, and spillover will be collected in the drip tray, and routed out the back via the included drain tube. Make canning fun AND mess free with this Drip Tray for the Tapcooler Canning Station.
Kit Includes:
Drip Tray base
Drain tube with push fit fitting
Suitable for carbonated beverages such as beer and kombucha
Purges with CO2 prior to filling
Adjustable shelf to accommodate cans up to 11.5" tall and 4" in diameter
Made to order in the United States
The XF4400 can filler is designed for the Artisan Craft Person looking to fill cans with carbonated beverages in a simple and affordable manner.
The filler can accommodate most cans sizes with its adjustable shelf, allowing great flexibility, and is suitable for carbonated beverages such as beer and kombucha. The XF4400 is based on the XpressFill Level Filler with modified valves and flow path diameters resulting in a much better flow of product with less foaming and better CO2 retention.
The filler will accommodate cans up to 4 inches in diameter and up to 11.5 inches tall.
Each bottle filler is hand built to order in the California factory. Lead times average about 3 weeks.
Features & Specifications:
600 cans per hour capacity (12 oz)
All materials in the beverage flow path are FDA certified as food grade for contact with alcohol
Maximum Can Dimensions: 4" D x 11.5" H
Maximum Operating Pressure: 12 psi
Weight: 34 lbs
Dimensions: 16" wide x 17" high x 15.5" deep
Requires 0.7A of 115V 50/60Hz power
Dual headed can filler compatible with carbonated and still beverages
Programmable fill height accurate to +/- 1mm for consistent fills with every operation
Timed CO2 purging takes place automatically to remove oxygen before each fill
The only filler model in this price range that can be set on a table and includes a drip tray
Hardware included to mount the filler to your wall if preferred
Set up takes only a few minutes with a simple push-button programming interface
Adjustable height—designed to fill cans of any size up to 32 oz Crowlers
Stainless steel construction throughout with self-draining drip tray
Just like the two-headed dog of Greek mythology, Orthos, this dual-headed can filler will perform like a beast in your canning line, doubling your fill rate and taking the stress out of canning day.
Operation
Programming the fill height and CO2 purge time is quick & easy and only requires pushing a single button to program your settings on either fill head. Once your settings are locked in, the LED ring will give you the green light to procced and filling and purging will execute automatically with a single push of the button. The Orthos Dual Head Can Filler utilizes an aero-grade pressure sensor to measure the height of the fill and is accurate to +/- 1mm for remarkably consistent fills each and every time.
Construction
We have designed the Orthos Filler to be a showcase for your taproom or home brewery, featuring a heavy stainless steel case and the necessary hardware for wall mounting or table use. The Orthos can be easily adjusted to fill any size can up to 32 oz Crowlers, and if need be, you can have two different style cans filling at the same time. The drip tray will help catch any potential spills throughout the filling process and features a drain that can be routed to a collection bucket or floor drain.
Cleaning
The cleaning process is just as easy as the filling process! Just attach a keg of water or beer line cleaner and run a fill cycle to clean out the product from the machine. The beer flows seamlessly through pinch valves, eliminating any internal cavities that need to be cleaned. The drip tray is conveniently removable for a quick wash after each use. When it's time for maintenance, simply swap out the beer tubing!
Includes:
Fittings / tubing to connect to 8mm Duotight inputs
(1) 8mm Duotight Tee Fitting (DUO1090)
(3) 8mm Duotight Elbow Fitting (DUO128)
(3) 5.5 ft. Length of 8mm OD EVABarrier Tubing (D1717A)
Duotight In-line Regulator (D1047)
Wall Mount & Feet
Drip tray
You May Also Need:
A keg of beer and connections for sanke or ball lock
Sanke: (2) 8mm Duotight Beer Thread Adapters (DUO104)
Ball Lock: 8mm Gas In & Bev Out Duotight Ball Lock QDs (DUO150 / DUO151)
8mm OD EVABarrier Tubing (D1717)
Dual Body CO2 Regulator (D1083)
OR
(2) Single Body CO2 Regulators (D1077)
Two pressure settings are needed. One to set the fill speed and the other to set the purge speed
Exceeding 3 PSI makes the purge turbulent and will mix air back into your can
We recommend KOMOS Regulators which include 8mm Duotight adapters for the output
Features:
Dual heads to fill two cans simultaneously
Stainless steel case
Consistent Fills
Drip tray, wall mount, & feet included
High fill accuracy
Easy programming
Fills still or carbonated products
Timed purging
Beer and CO2 inputs are 8mm Duotight
Specs:
Wall Mounted: 14-3/4" H x 7-7/8" W x 3" D
Table Mounted:
12 oz can: 15-3/4" H
32 oz Crowler: 17-3/4" H
7-7/8" W x 8" D
18V Power Supply
External WiFi Antenna Upgrade for the Cannular Can and Bottle Filler. If your filler is experiencing connection issues, this antenna will help boost signal reception.
Only suitable for the Cannular Can and Bottle Filler (CAN250). Not suitable for other RAPT devices.
See here for the Antenna Upgrade Installation Guide.
Please Note: Cannular Can and Bottle Filler purchased after 7/1/2025 will come with an upgraded WiFI antenna as standard.
