PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   Precisely control your fermentation temperature and improve the taste of your finished beer Independently control up to four Grainfather Conical Fermenters Compact design takes up little space in your home brewery Cold crash beer to clarify before kegging or bottling These systems will ship free to anywhere in the contiguous United States. Control your fermentation temperature accurately, every time with the Grainfather Glycol Chiller! Temperature control is one of the most crucial elements for producing a good quality beer. Temperature swings can cause yeast to stress out and throw off unwanted flavors that will negatively affect your beer. Keeping the fermentation temp regulated and stable throughout the whole process will ensure you get the right flavor profile. With the ability to individually power and control the temperature of up to four Grainfather Conical Fermenters, each with their own fermenting schedules, the Grainfather Glycol Chiller is the perfect addition to ensure superior fermenting results. Design With a sleek and compact design, that still accommodates the full array of features, the Glycol Chiller maintains the Grainfather’s principle of providing quality home brewing equipment, that delivers craft brewery like results, with a small footprint. With the addition of the Glycol Chiller, your system is operating at the ultimate level and you are even able to cold crash and lager down to 39-43°F (4-6ºC). The Glycol Chiller connects to a hidden cooling sleeve, located in between the two stainless steel walls of the Conical Fermenter. Your desired temperature is dialed into the digital temperature controller on the Conical Fermenter, the liquid then travels through this sleeve, cooling the stainless steel which in turn cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, is completely concealed and does not need cleaning or sanitizing - a true innovation for a fermenter on this scale. Features Allows you to cold crash 23 L (6 US Gal) of wort to as low as 4-6ºC (39-43°F). Minimum temperature will vary based on external factors such as ambient room temperature, the number of fermenters connected and other environmental conditions. Cools and powers up to 4 Conical Fermenters at different temperatures and fermenting schedules. What's Included? Glycol Chiller Wall outlet power cord with plug 2 x cooling connection couplers 2 x 6.5 ft (2 m) insulated hoses 1 x Glycol Funnel 1 x silicon tube for priming pump Propylene Glycol not included Specifications: LED display 1.5 Gal (6 L) glycol tank 300 W 110-120V, 60Hz 15.3" W x 17.7" D x 25.8"H Weight: 62 lbs CSA Certified   Note: The instructions for the Glycol Chiller will be attached to the outside of the shipping box. It is important that you retain these, do not throw them away and read them carefully before use to ensure no damage occurs to the unit. If these for any reason are not included with your purchase, we highly recommend you download a new copy via the instructions tab on this page and read them carefully.

Read more less

The Anvil temperature controller is tuned and designed for home brewing. No need to spend time configuring and fiddling with settings. Just plug it in and start controlling your temps! The unique design has an integral male plug on the back allowing it to be to plugged into any 120V wall receptacle greatly reducing cable clutter and eliminating the need to drill holes for mounting. Simply plug your refrigerator or pump into the front and you’re ready to go. The 9.5 ft long sensor cable reaches anywhere you need. We’ve also selected a robust 15A internal relay for long life and more capacity than the competition. All this at one cool price. Features: 120V 15A operation Control temps to +/- 1F Temperature Control Range: 16 - 220°F Fahrenheit display Selectable heat and cool modes (not dual stage) Plugs into any 120V wall receptacle – no mounting holes needed! Reduced cable clutter Plug can be inverted to match your receptacle 9.5 ft sensor cable length 1.5" sensor probe length  

Read more less

If you've been looking to step up from fermenting in plastic buckets or carboys, this is an excellent choice for your next fermenter. Stainless steel is a much better option than glass or plastic, as it is extremely easy to clean and virtually lasts forever. There's also much less chance of contamination as stainless doesn't scratch like plastic. Over time, you'll get scratches in plastic fermenters from normal wear and tear, creating microscopic havens for bacteria. Meanwhile, glass carboys are always at risk of breaking which is something you will never have to worry about with stainless steel. The Bucket Buddy is a great value if you're looking for a stainless steel fermenter with built-in heating control. If you live in a cold climate, ale fermentations may be a seasonal affair, as cold ambient temperatures can easily drive down the temperature of your wort below your yeast's optimal fermentation temp range. The Bucket Buddy offers a simple solution with an integrated heating element and digital temperature control. Program your fermentation temperature and if the temp drops below your set point the unit will gently heat your wort from the bottom up via the concealed element located in the base. For cooling, you can place the fermenter in a dedicated refrigerator or drill into the lid to install a Temp Twister Cooling Coil. A temperature controller probe can then be taped to the side of the fermenter to control your cooling source, or you can drill another spot in the lid for a thermowell. Another advantage over carboys and plastic buckets is the domed base inside the fermenter which is great for yeast flocculation when fermentation is complete. The included racking arm will make it easy to transfer out every last drop of beer while leaving the yeast cake undisturbed. The entire racking arm and ball valve assembly is weldless, which means you can remove the assembly to clean and sanitize it between batches. You can even boil the assembly for added assurance that it's been sterilized. To help maintain a steady temperature and cut down on power consumption, the Bucket Buddy pairs well with either the BrewZilla Neoprene Jacket. This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans, as well as a stopper and airlock for the domed lid. Specifications: 304 stainless steel construction 17.1 gallon total capacity Digital temperature control 110V / 60W power Stainless steel outlet valve with rotating racking arm Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Please note: Heating capacity is highly dependent on ambient temperature and use of insulation. The 65L Bucket Buddy is appropriate for warm fermentations such as kveik. Adding insulation may increase heating capacity while colder ambient environments may lower heating capacity. KegLand Part Number: KL23061  

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   Control and power up to two fermenters at different temperatures and fermenting schedules Use with the GCA Glycol Chiller Adapter to connect to the Grainfather S SERIES range of fermenters or most other fermenters Sleek and compact design with LED control display Compatible with the Grainfather App when connected to a Grainfather G SERIES fermenter or the GCA for managing your fermentation from anywhere via Wi-Fi The Grainfather GC2 Glycol Chiller makes consistent beer every time with accurate temperature control of up to two fermenters, even if they are running at different temperatures and fermentation schedules. Don’t leave your fermentation to chance, leave it to Grainfather. Control and power up to two fermenters at different temperatures and fermentation schedules with the GC2. By accurately controlling the temperature of your fermentation, you can produce consistent beers, every time. What's Included: GC2 Glycol Chiller Glycol funnel Silicone tubing for priming pump Specifications: Size: 23" x 12.6" x 14.6" Weight: 71.5 lbs Capacity: 0.8 gal glycol tank Power: 110V, 160W

Read more less

The Blichmann temperature controller is a simple and easy to use controller for home brewing. Plug it in and start controlling your temps right out of the box! Simply plug your refrigerator or pump into the front and you’re ready to go. This is a direct replacement to the controller found in the Blichmann Fermenator™ Pump & Controller Kit. Features: 120V 15A operation Control temps to +/- 1F Temperature Control Range: 16 - 220°F Fahrenheit display Selectable heat and cool modes (not dual stage) Plugs into any 120V wall receptacle – no mounting holes needed! Reduced cable clutter Plug can be inverted to match your receptacle 9.5 ft sensor cable length 1.5" sensor probe length Please note: this controller is not intended to be used with a heating element.  

Read more less

1.5" Tri-Clamp end cap welded to thin wall stainless tubing for quick accurate temperature readings. Insert 1/4" thermal probe from controller. Works perfectly with our Ranco digital controllers. Thermowell mounts into 1.5" Tri-Clamp ferrule in the side or your tank. Has a 6 inch probe. Works with new 2016 Rancos

Read more less

Manage your fermentation temperatures to exacting precision and repeatability with the Blichmann Pump & Controller Kit.  The perfect system to pair with a glycol chiller or ice bath, and the Fermenator™ cooling coils.  Features: High quality 24V DC submergible pump has 5 GPM output and quiet operation Temperature Controller is tuned and designed for brewing. No need to spend time configuring and fiddling with settings. Just plug it in and start controlling your temps!  15A 120V operation 12” long thermowell fits in the included three hole stopper.  Fits all Fermenator™ conicals and any other vessel requiring a #7 stopper Includes 10ft of 3/8” PVC hose and hose clamps Compatible with Fermenator™ sizes 7, 14.5, 27, and 42 gallon Kit Includes: Submergible Pump Temperature Controller 10 ft. of 3/8" Silicone Tubing 3 Butterfly Hose Clamps Thermowell Dual Hole Stopper Power Adapter      

Read more less

4 replacement O-rings for Thermowell of Ss Brewtech FTSs: 16mm x 1.8mm O-ring for weldless thermowell and lid and coil seal on FTSs

Read more less

The Chilling Coil kit can be used to update the 7 gal Brew Buckets for temperature control. Then you can add an FTSs Touch kit for use with the Ss Glycol Chiller. Features: Thick 5 mm zippered neoprene jacket Immersion chiller coil mounted to 6" TC cap Cap | 3” TC with ½” Blow-Off and 300mm Thermowell 3/8" hose barbs on the chiller coil 17mm Plug for Brew Bucket Brewmaster Edition Included hose clamps (for chiller coil), TC Clamps, TC Gaskets Kit not compatible with Brite Tanks, Chronical Series, or Unitanks. Specs: Assembled Dimensions: 27.5"H x 13"W x 13"D (on Bucket) Assembled Weight: 22lbs / 10kgs (on Bucket)  

Read more less

This flat lid with pre-drilled holes allows you to easily add a Temp Twister Cooling Coil to your 35L Bucket Buddy fermenter. It also has holes for your stopper & airlock (included with the Bucket Buddy) as well as a Thermowell so you can control the circulation of cooling solution with a Temperature Controller. The lid is also compatible with 35L BrewZillas and DigiBoils. If you're fermenting in the Bucket Buddy with built-in heating element, we recommend plugging the unit into the heating outlet of your temperature controller and leaving the power switch turned on. This will allow the temp controller to provide power to the unit only when heating is needed and it will cut the power as soon as you're back to your set temperature. Using the Bucket Buddy's controller to maintain the heating set temp and using a separate controller to maintain the cooling may result in heating and cooling cycling at the same time. NOTE: The pre-drilled holes are meant for specific sizes of Duotight bulkheads and the stopper included with the Bucket Buddy fermenter. All holes need to be occupied in order to protect your fermentation from outside contaminants. Depending on the placement of the Temp Twister, you might need to shorten the inlet/outlet tubes on the outside of the fermenter using a Pipe Cutter. Lid only. Other accessories must be purchased separately. You Will Also Need: Temp Twister Cooling Coil FermZilla Thermowell Temperature Controller KegLand Part Number: KL28103

Read more less

Replacement Heavy Duty Wire Shelf for the RAPT Fermentation Chamber. Weight Rating: 132 lbs (60 kg) Dimensions: 17.7" W x 16.1" D x 1.1" H (450mm x 410mm x 30mm) KegLand Part Number: KL15844

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   The Glycol Chiller Adapter works in a similar way to the GF30 Conical Fermenter but instead of the built-in cooling sleeve and heating element, it uses a stainless steel cooling coil and a heating pad to control the temperature of almost any fermenter. The cooling coil is connected to the Glycol Chiller and immersed in the fermenter. The heating pad is attached to the side of the fermenter using hook and loop tape. A temperature probe is also attached to the fermenter and the GCA will then regulate the cooling, or heating, as required. The GCA connects to the Grainfather App so you can control your fermentation temperature on the go. Included in the GCA Kit: GCA Controller Heating Pad (12V 30W) 5m Cooling Coil Hose Rubber Bung Velcro Hook Strip x 4 Hose Clamps x 2 Rubber Bung Stoppers x 4

Read more less

Designed to work with the FTSs Touch to heat fermenting wort in colder climates. Includes XT30 Connector - Will not work with legacy FTSs controllers.

Read more less

Temperature control is a very important part of fermentation for optimal flavor control and quality of the finished beer. With the ANVIL cooling system you, won't be disappointed. This simple system includes virtually everything you need to keep your beer temperature closely regulated at an amazing price. Needed, but not included, is a cooler filled with water and ice, or a glycol chiller.   System Includes: Sanitary Stainless Steel Cooling Coil 12" Sanitary Stainless Steel Thermowell 4 Hole #7 Stopper Submersible Pump - 12V DC Max Head - 16 ft  (2) 5 ft Vinyl Cooling Hose Insulated Fermentor Jacket Anvil Temperature Controller  

Read more less

Use this coil to make a cooling system for your 7 gallon Fermenator. Made from 304 stainless steel with 1/2" NPT bulkhead fittings that are easy to install. Partner the Blichmann Cooling Coil with a temperature controller, recirculation pump and glycol chiller for a complete cooling system. Features: 25 ft long tube made from 304 stainless steel Short Cooling Coil fits up to 7 gallon Fermenator Easy to install and sanitize bulkhead fittings 1/2" NPT connections Includes two 3/8" 90° QuickConnector fittings 9.5" tall x 9" diameter

Read more less

Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away.  This system will hold your set temp both when it gets cold and when it gets warm! This kit is for owners of the Ss standard edition Chronical 14 Gallon fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.  Kit contents include: 1x heater pad for 14 Gal Chronical  1 x power supply 110-240V and 6A power supply for global use 1 x two-way switchable FTSs controller  1 x flat FTSs lid  1 x chilling coil  1 x lid mounted thermowell  10 feet of vinyl tubing  1 x lid stopper  1 x submersible pump  1 x custom tailored neoprene jacket for Chronical 14 gallon fermenter Digital temp controller displays both C/F Chill from 0.5-2 degrees F per minute Custom lid with 304 Ss immersion chiller coil 304 Ss weldless lid mounted thermowell Accurately monitor and control temps

Read more less

This Ranco temperature controller is the perfect option for the "DIY" homebrewer.  While it comes with the temperature probe and all of the standard internals, it doesn't include the power cord (that you plug into the wall), or the input cord (where you would plug your device into). These cords are fairly easy to wire on your own, but not having them already attached allows you to customize your temperature controlled fermentation setup!  Whether you would like to hard wire a device into the unit, or have an extra long cord available, this temperature controller is the solution!

Read more less

A simple plastic bulkhead for temperature probes. Temperature probe must be close to 1/4" in diameter (6.5 mm). Ideally used with the MKII Temperature Controller (FE604). Note: Do not exceed temperatures of 221 F (105 C). Does not come with probe. Kegland Part Number: KL01939

Read more less

Discover the enhanced Blichmann Engineering Glycol Chiller — now more efficient than ever! With a powerful 1/2 HP compressor, it delivers cooling capacities of 3100 BTU/hr at 28 degrees Fahrenheit and 3400 BTU/hr at 34 degrees Fahrenheit. Operating quietly, it offers intuitive multi-vessel crashing and fermentation temperature control through a plug-and-play temperature controller dock, making temperature adjustments a breeze.  Designed for seamless integration into your existing home brewing setup, it has a compact footprint and organized cable with hose management to avoid unnecessary clutter. Compatible with up to 6 Pump & Controller Kits (optional accessory), this chiller is truly remarkable, and will ensure optimal performance for your brewing needs. Key Features: Powerful 1/2 HP Compressor Cooling capacity of 3100 BTU/hr @ 28°F and 3400 BTU/hr @ 34°F Multi-vessel crashing and fermentation temperature control Convenient plug-and-play temperature controller dock Compatible with up to 6 Pump & Controller Kits (optional) Tidy cable and hose management Small footprint Quiet operation Optional concentrated propylene glycol is offered in a convenient 2.5-gallon jug Lagering Temps Capability: (2) 1 BBL fermenters (4) 1/2 BBL fermenters (6) 7-gallon and 14-gallon fermenters Fermentation Temperature Control Capability: (4) 1 BBL fermenters (6) 7-gallon, 14-gallon, and 1/2 BBL fermenters   *Results based on vessels equipped with insulation at an ambient temperature of 75° F.  

Read more less

Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away.  This system will hold your set temp both when it gets cold and when it gets warm!   This kit is for owners of the Ss standard edition Chronical Half Barrel fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.  Kit contents include: 1x heater pad for Half BBL Chronical  1 x power supply 110-240V and 6A power supply for global use 1 x two-way switchable FTSs controller  1 x flat FTSs lid  1 x chilling coil  1 x lid mounted thermowell  10 feet of vinyl tubing  1 x lid stopper  1 x submersible pump  1 x custom tailored neoprene jacket for Chronical Half BBL fermenter Digital temp controller displays both C/F Chill from 0.5-2 degrees F per minute Custom lid with 304 Ss immersion chiller coil 304 Ss weldless lid mounted thermowell Accurately monitor and control temps

Read more less

Turn your RAPT Chamber into a highly specialized wine cellar. These shelves are suited to fit wine bottles and the larger champagne bottles. KegLand Part Number: KL25577  

Read more less

Replacement PCO1881 Insert for the RAPT Fermentation Chamber. The RAPT chamber can fit up to 4 inserts. KegLand Part Number: KL26437

Read more less

A properly controlled fermentation temperature is critical to producing quality beer. The now-iconic original Fermentation Temperature Stabilization System (FTSs) resulted from many napkin sketches that applied advanced thermodynamics to traditional brewing practices. The system is elegant in its simplicity and incredibly efficient, yet it was the third product we ever designed at Ss Brewtech, just after the Brew Bucket and Chronical. For an encore performance to the classic FTSs, we wanted to reimagine what homebrewing temperature control could be. Your chill source can be as simple as a cooler with ice or as sophisticated as the Ss Glycol Chiller. If your setup requires temperatures to be corrected both up and down, check out the optional FTSs Touch | Heating Pad. The FTSs Touch is designed to be paired with systems like the Unitank, Chronical BME, and Brite Tank BME, which already have a cooling coil and neoprene jacket. What's Included: FTSs Touch Display FTSs Nub (junction box) FTSs Pump Digital Thermoprobe 3/8" Silicone Tubing FTSs Pump Ice Guard  Silicone Thermoprobe Holder Stand Mount TC Mount Cable/Tubing Management Ties Hose Clamps Power Supply

Read more less

Use this silicone sleeve to fit a cooling snake into a the existing air lock hole on a Variable Volume Fermenter. Silicone sleeve makes an air tight seal between lid and cooling snake. Note that if you want to use the cooling snake during an active ferment you will need to modify the lid to be fitted with an airlock - we suggest a tri-clover fitting be welded in the top and a piece of tubing connected to this that runs into a bucket of water. We can help you choose the necessary fittings. Dimensions: Bottom OD - 1 5/8" Top OD - 1 15/16" ID - 1 1/8" Dimensions installed on Snake: Bottom OD - 1 3/4" Top OD - 2"

Read more less

The German made 1.2 horse power MB Chiller is an ideal solution for nano breweries looking to chill up to 10 fermenters at once. The idea of the MiniChilly is that for each fermenter you want to a chill a pump kit is added.  A pump kit (GLY355) includes a submersible pump that is placed in the cold bath of the Mini Chilly along with a digital controller that is placed next to your fermenter. Silicone  tubing is included to make the connections. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature. In this way each tank can be set at different temperatures.   The MiniChilly is made by Quantor/Kreyer of Germany who is the largest manufacturer of glycol systems for breweries and wineries in the world.  Made with high quality manufacturing and components, the MiniChilly is a durable system for many years of problem-free brewing. It is German made and we guarantee you will appreciate the build quality when compared to other chillers on the market.  The unit features a stainless steel case with stainless 3/8" barbs in the top that allow for a clean connection of the silicone tubing that will run from each pump to each tank.  The MiniChilly is able to chill its reservoir down to 21°F when a 30% glycol solution is used. The compact size and included casters make it easy to move around the brewery when needed.  Applications: Cooling of Fermentation Cold Crashing for Brite Tanks Maintain Lagering Temperatures Compatibility: The MiniChilly can be used with any fermenter that has a built-in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following systems and fermenters. BrewBuilt Jacketed Uni Conical - You will need one Glycol Pump Kit for each tank. Ss Brewtech Fermenters and Brites with optional FTS Temperature Control Systems: Because FTS systems include a pump and controller you will not need to buy a separate Glycol Pump Kit.   Spike Conical with Optional Cooling Package - Because the optional Spike cooling system includes a pump and controller you will not need to buy a separate Glycol Pump Kit.  Speidel Tanks with Optional Cooling Jackets - You will need one Glycol Pump Kit for each tank.    Grainfather Fermenters - Grainfather fermenters have standard cooling jackets. You will need one Glycol Pump Kit for each fermenter Blichmann Fermenators with Optional Cooling Coil - You will need one Glycol Pump Kit for each Fermenator. Capacity: Many chiller ratings are based on the theoretical power of the compressor, while the cooling capacity of the MiniChilly is rated at a realistic ambient temperature. This is much more useful for predicting the MiniChilly’s performance in real world applications.  Of course, you could cool a greater number of smaller tanks but you’re ultimately limited to the 10 connections.  Actual cooling capacities will vary based on the insulation of the tank. For the examples below we assume neoprene or better.   Cooling Capacity Example:  Up to 10 1BBL (31 Gallon) well-insulated tanks fermenting at 68°F in 80°F ambient temperature. For every fermenter you want to cold crash remove 4 fermenting fermenters from the capacity. Set Up: In order to hook up the MiniChilly to your fermenter or tank's cooling system, you will need 4 lengths of tubing per pump. All tubing connections should be secured with hose clamps. Length 1: Submersible pump outlet to inner barb of 1st bulkhead Length 2: Outer barb of 1st bulkhead to cooling system inlet Length 3: Cooling system outlet to outer barb of 2nd bulkhead Length 4: Inner barb of 2nd bulkhead to MiniChilly reservoir (should drain freely, no connection necessary)   Technical Characteristics: Power: 110V-1Ph/50-60Hz Compressor Power: 1.2hp/900watts Cooling Capacity at 32°F glycol temp and 90°F Ambient Temp: 1.05 KW/1050 Watts (60Hz 110V) Cooling Capacity at 60°F glycol temp and 90°F Ambient Temp: 1.92 KW/1920 Watts (60Hz 110V) Stainless Steel Unit Water Temperature Range: 21°F - 86°F (-6°C - 30°C) Ambient Temperature Range: 50°F - 90°F (10°C - 32°C) Refrigerant R134a Free Glycol Water-Bath for Mini-Pumps Fittings 3/8" for Plastic Tubes of Individual Pumps Solid Wheels w/ Breaks for Easy Mobility Universal C19 Plug On/Off Switch Water-Level Sight-Tube Grooves for Individual Pump Cables Safety Inner Separation Water Side from Electric Side Tank Capacity: 12.68 gal. (48 L) Dimensions: 29.5"L x 15.75"W x 21.75"H Weight: 112.5 lbs Made in Germany CE Certified  

Read more less

This flat lid with pre-drilled holes allows you to easily add a Temp Twister Cooling Coil to your 35L Bucket Buddy fermenter. It also has holes for your stopper & airlock (included with the Bucket Buddy) as well as a Thermowell so you can control the circulation of cooling solution with a Temperature Controller. The lid is also compatible with 65L BrewZillas and DigiBoils. If you're fermenting in the Bucket Buddy with built-in heating element, we recommend plugging the unit into the heating outlet of your temperature controller and leaving the power switch turned on. This will allow the temp controller to provide power to the unit only when heating is needed and it will cut the power as soon as you're back to your set temperature. Using the Bucket Buddy's controller to maintain the heating set temp and using a separate controller to maintain the cooling may result in heating and cooling cycling at the same time. NOTE: The pre-drilled holes are meant for specific sizes of Duotight bulkheads and the stopper included with the Bucket Buddy fermenter. All holes need to be occupied in order to protect your fermentation from outside contaminants. Depending on the placement of the Temp Twister, you might need to shorten the inlet/outlet tubes on the outside of the fermenter using a Pipe Cutter. Lid only. Other accessories must be purchased separately. You Will Also Need: Temp Twister Cooling Coil FermZilla Thermowell Temperature Controller KegLand Part Number: KL28110

Read more less

The Chilling Coil kit can be used to update the 3.5 gal Brew Bucket Minis for temperature control. Then you can add an FTSs Touch kit for use with the Ss Glycol Chiller.  Features: 304 Stainless steel Immersion chiller coil Thick 5 mm zippered neoprene jacket FTSs designed lid included Weldless 200mm thermowell Included hose clamps (for chiller coil), 17mm stopper (for airlock) Specs: Assembled Dimensions: 17.5"H x 11.5"W x 11.5"D (on Bucket) Assembled Weight: 10lbs / 4.5kgs (on Bucket)  

Read more less

Introducing the Ss Glycol Chiller 3/8 HP, which will maintain lager temps and enable crash cooling for up to 6 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system. Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this set up offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery.  Features: Pumps not included, attach up to 6 FTSs Touch kits (sold separately) Capable of crash cooling and lagering Assuming one vessel is crash cooled at a time: Chills Up to 4 - 1 BBL Chronicals, Unitanks or Brite Tanks Chills Up to 6 - 1/2 BBL, 14, or 7 gal Chronicals or Unitanks, 10 or 20 gal Brite Tanks Chills up to 6 - 14 or 7 gal Brew Buckets  Not Compatible with the FTSs Pro Series Controllers Specs: Vertical chassis layout 120 VAC 3/8 HP Compressor 3576 BTUs/Hr 10 Gallon Reservoir with Pressure Vent R290 Refrigerant Casters included Made in France Dimensions: 18" W x 18" D x 28" H  

Read more less

The Ss Glycol Chiller | 1/5 HP, will maintain lager temps and enable crash cooling for up to 3 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system. Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this setup offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery.  Features:  Pumps not included, attach up to 3 FTSs Touch kits (sold separately) Capable of crash cooling and lagering Assuming one vessel is crash cooled at a time: Chills Up to 2 - 1/2 bbl, 14 gal Chronicals, Unitanks, or Brew Buckets Chills Up to 3 - 7 gal Chronicals, Unitanks, or 10 gal Brite Tanks Chills Up to 3 - 7 or 3.5 gal Brew Buckets Not Compatible with the FTSs Pro Series Controllers Specs: Vertical chassis layout 120 VAC 1/5 HP Compressor 1450 BTUs/Hr 4.75 Gallon Reservoir with Pressure Vent R290 Refrigerant Casters Included Made in France Dimensions: 14" W x 11" D x 27.5" H  

Read more less

Glycol Chillers for cooling fermentations of beer and wine, and also used for maintaining temperature for draft beer dispensing. These glycol packs are perfect for controlling temperature during fermentations. They can be used with cooling plates and snakes for macro bin fermentation, as well as connected to tanks via cooling jackets. If you desire to do cold stabilization with this small chiller you will need to insulate your tanks very well and have sufficient cooling surface area in contact with the wine. A better machine for cold stabilization is our Chilly45 made by Kreyer, featuring 4x the power. Features of Glycol System #1 Digital Thermostat Digital Temperature Controller 2,300 btu/hr Compressor 1/3 hp Vertical-type pump 115V power 4.5 gallon bath capacity Max distance of glycol line is 75 feet 22-1/4" H x 17-3/8" W x 26" D 118 pounds Will cool glycol bath down to approximately 20°F

Read more less

Heat resistant shelves for your brand new RAPT Fermentation Chamber. Can be used for trays of mushrooms or seed sewing with added grow lights. It can also be used as a humidity tray if you require a humid environment for your project. 60 mm (2.3") deep. KegLand Part Number: KL25553    

Read more less

Replacement Temperature Sensor for Kreyer Chilly 45, Chilly Max, and MCK units.

Read more less

Replacement temperature probe for the RAPT Fermentation Chamber. This is the standard probe that is included with the fridge. It can also be replaced with the Extension Probe which is long enough to be fed into a fermenter's thermowell. KegLand Part Number: KL26451

Read more less