This awesome little fermenter is ideal for any fermentation, up to 2.5 gallons. The unit is designed to be an all in one fermenter and bottling bucket. The bowl shape at the base of the fermentor allows sediment to settle prior to bottling. The wide opening on top allows for easy cleaning, large direct additions of fruit, hops or other products and overall easier access. Cool beer stein styling makes this the freshest fermentor on the market!
Great for splitting 5 gallon batches into two separate fermentation to test yeast, different dry hops, add oak to one, etc.
Use this fermenter for your next batch of fruit wine, half batch of beer or any other fermentation! Holds roughly 2.9 gallons total; recommended for 2.5 gallon fermentations.
With the FermZilla Pressure Kit you can ferment under pressure, carbonate, and serve without ever needing to move your beer out of the fermenter. The kit inlcudes two plastic female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla's lid. For the beverage out, you'll have a silicone dip tube with stainless steel float, allowing you to always draw from the clearest beer at the top of the tank. Pick up the Pressure Kit and turn your FermZilla into a true unitank! Includes one red and one yellow ball lock cap to help differentiate which one is being used for liquid and which one for gas. Either color can be used for either function. The silicone dip tube is 31" long. It will work perfectly as is for the 55L FermZilla. For the 27L model we recommend cutting the dip tube shorter to remove unwanted slack. With the optional Floating Dip Tube Filter, you can prevent hop material and other solids from ever entering the dip tube. Especially handy when you're pulling samples mid-fermentation! Fermenting Under Pressure:
The pressure kit allows for fermenting under pressure, which will reduce esters and fusel alcohol production. This means you can ferment at warmer temperatures than you normally would, even making lagers at room temperature. Most commerical beer is fermented under pressure simply due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the distinct differences between homebrewing and brewing on a commercial scale. The FermZilla's lid already comes with a built-in pressure relief valve that will blow at 35 psi; the pressure kit simply allows you to add CO2 through the ball lock fitting. We strongly recommend that you also purchase an adjustable pressure relief valve, or spunding valve, which allows you to set a lower pressure. It's always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. Carbonating, Transferring, and Serving:
When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using a spunding valve. This means you can eliminate kegging and serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Attach a beer line from the FermZilla's bev out to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator. Eliminate Oxidation:
Since the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock. Key Features:
Ferment beer under pressure to reduce ester and fusel alcohol production Always draw clear beer with the floating dip tube Keg beer that has already been carbonated Use CO2 to push beer into a keg or through a filter into a keg Eliminate kegging altogether by carbonating and serving directly from the FermZilla Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty FermZilla, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the tank. Please note: pressure kit does not include the lid pictured in the example photo. The ball locks and floating dip tube are installed on the FermZilla's existing lid.
The redesigned FermZilla Collection Container attaches directly below the fermenter without the need for a screw top adapter piece Replace your existing 600mL, keep a spare on hand, or upgrade from the original tri-conical collection container with the 3" x 3" Tri-Clamp Butterfly Valve Made from heat resistant, plasticizer-free Tritan plastic and dishwasher safe PCO1881 side ports for use with Ball Lock Carbonation Caps and the PRV Cap Combo 3" tri-clamp, gasket, and end cap included This collection container fits all FermZilla Tri-Conicals with a 3" x 3" Butterfly Valve. No more threads or oil filter removal tools to get this off, simply depressurize and remove the tri-clamp fitting. We recommend placing a towel or upside down frisbee to catch some drips. The clear body is made from Tritan from Eastman Plastics which is heat tolerant and BPA- and plasticizer-free. The ports on the side are the same as a standard coke bottle or soft drink bottle (PCO1881). These are also the same on the top of the FermZilla lid and the previous model collection container. Owners of the FermZilla Tri-Conical that came with the 2" T.C. collection container can upgrade to this collection container by swapping their butterfly valve to the 3" x 3" Tri-Clamp Butterfly Valve. Recommended Accessories: 1 x Ball Lock Carbonation Cap (FE13 or FE146) 1 x Red PRV Cap Combo (KG524) Includes: 600mL Tritan Plastic Collection Container 3" Tri-Clamp Ferrule PCO1881 Carbonation Cap Ports 3" Tri-Clamp (3-Piece) 3" Tri-Clamp Silicone Gasket 3" Tri-Clamp Black Polyketone End Cap Dimensions: 6.7" Tall Tapers from 3" ferrule down to 2.5" diameter bottom KegLand Part Number: KL3036
Wide mouth carboys are the easiest glass fermenter to clean with plenty of room to get your arm inside to scrub
Add bagged flavoring additions and remove them freely when finished—this can be nearly impossible with traditional narrow neck glass carboys
Watch fermentation activity as it's happening! The ultimate advantage of translucent glass or plastic fermenters
Ported lid with removable cap sized for a #5 stopper & airlock
Carrying harness included for easier handling
Glass carboys have been a staple of the brewing and winemaking world for generations, but traditional tight neck carboys aren't without their limitations. Standard glass carboys can be difficult to clean after fermentation. The wide mouth carboy is extremely easy to clean—simply removing the lid allows you to get your hand or arm all the way inside to scrub away stubborn sediment.
Each carboy comes with a carrying harness.
Features:
Gasketed lid for tight seal
Included carrying harness
Ported lid ready for #5 stopper & airlock
165mm (6.5") lid opening
Continuous thread, 5mm pitch
Dimensions
Size
Diameter
Height
5L
7.9"
10.2"
9L
8.9"
12.2"
15L
10.4"
14.2"
23L
11.8"
16.5"
26L
12.4"
17.3"
Please note: The carrying harness should not be used to move the vessel when full. The airlock lid is primarily recommended for short fermentations.
Standard, plunger-style sample valves can be a bit of hassle when it's time to check your gravity or do a taste test. Replace it with this simple T.C. x Draft Shank adapter which allows you to pour samples with your preferred beer faucet. We recommend using the NukaTap Flow Control Faucet with Self-Closing Spring. This will allow you to put some restriction on the beer flow and come in very handy when taking samples from a pressurized conical or brite tank. Also compatible with Intertap, Perlick, and other faucets. Please note: standard NukaTap SS Faucet and Self-Closing Spring will not work with this shank. You can use a NukaTap SS faucet, but without the autoclose spring. Specifications: 2.75" total length Standard shank assembly 1.5" T.C. connection KegLand Part Number: KL19989
Automatically release pressure inside your fermenter during pressure fermentations Regulate beer flow during pressurized transfers from fermenter to keg Built-in pressure gauge for easy reference when adjusting the spunding valve Pressure gauge is interchangeable—swap to different pressure ranges that better suit your application Diaphragm spunding valves offer higher accuracy compared to spring & poppet spunding valves 8 mm Duotight inlet/outlet for use with 8 mm OD EVABarrier tubing or 8 mm Rigid Joiners The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. Pressure Fermentation Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately you need a way to release excess pressure. You'll pressurize your vessel to your desired psi, but once fermentation begins and those hungry, active yeast start creating CO2, the pressure inside the vessel will increase. Attach a spunding valve and set it to your desired pressure, and it will blow off when the pressure gets too high and close up again when it's back to your desired psi. Pressure Transfers Even if you don't have a pressurizable fermenter, you may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process. Diaphragm vs. Poppet With the poppet style spunding valve, a spring pushes against a poppet to keep the valve closed. When the poppet lifts up to open, the surface area the gas pushes against becomes larger, and the spring has to work harder to push the poppet down and reseal the valve. This can lead to more gas being released than intended, and the remaining pressure in your vessel may be at a lower psi than your spunding valve’s set psi. Instead of a poppet, the spring inside the BlowTie pushes against a diaphragm, which has an immensely larger surface area. This means the surface area that the gas pushes against while the diaphragm is closed is significantly closer to the surface area it pushes against when the diaphragm is open. This leads to higher accuracy, and the remaining pressure after excess gas is released will be much closer to your set blow off pressure. Set Up The BlowTie spunding valve comes with 8 mm Duotight fittings on the inlet and outlet, and we recommend using it with EVABarrier 8 mm OD tubing (D1717 or D1718). You'll also need the flare Duotight fitting (DUO106) in order to attach it to a ball lock or pin lock disconnect. Dialing in your desired pressure is even easier with the BlowTie 2, thanks to the integrated pressure gauge. Simply start with the adjustment knob fully closed, then slowly open it until the gauge reading matches your desired pressure setting. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-15 psi WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Kegland Part number: KL15042
If you're a FermZilla owner, we highly recommend picking up an additional collection container or two. Use one to harvest and store your yeast, and then a second for your dry hop additions. Or harvest and store multiple yeast cultures in multiple collection containers.
The collection container features threaded ports that are compatible with the KG500 Ball Lock Cap. Attaching the ball lock cap will allow you to purge the container of oxygen before dry hopping. Or attach a small length of tubing with a diffusion stone and you'll be able to oxygenate your wort or carbonate your finished beer from the bottom up.
The container is made from Tritan and the lid from HDPE.
Kegland Part number: KL11365
This stainless steel thermowell is the same one used with many of the hood and stopper thermowells we sell, such as the FE625 and FE624B. It is also a direct replacement for the thermowell used with the BrewBuilt CoolStix™ for Carboy fermenters. Specifications: 15" long 1/4" inner diameter 5/16" outer diameter Made from 304 stainless steel Will not work with Johnson Temperature Controllers (FE60 or FE61) because the probes are too large.
The FastFerment Collection Ball lets you harvest and store your yeast for future batches. Having an extra ball means you can store yeast from your previous brew, while collecting yeast from your current! Grab a few of these to keep your favorite strains on hand for fast fermenting anytime! You will need a FastFerment base unit in order to use this product.
Comes with Ball, Union Connection, and stopper.
Perfect for use as a 5-gallon batch beer fermenter or bottling bucket Inlcuded plastic spigot for easy gravity transfers or attaching a bottle filling wand Sediment blocker on the spigot's back locking nut helps minimize trub pickup when racking out after fermentation Once you've upgraded to a carboy or other fermenter, the bucket will remain a reliable brewing tool for cleaning and sanitizing purposes External volume markers provide a convenient reference point when filling the bucket with water to make cleaner or sanitizer solution A six gallon food grade bucket for fermentation or bottling with a built in spigot and external volume markings up to five gallons. Outlet barb accepts 3/8" ID vinyl tubing. To use as a fermenter you will need to pick up the optional lid, stopper, and an airlock. Includes our new Sediment Block Spigot, which will help minimize trub uptake as you rack after fermentation. If using this as a bottling bucket, simply rotate the spigot to maximize product output. Spigot includes gasket and sediment blocking lock nut and can easily be removed for cleaning and sanitizing. If you use the bucket for fermentation be sure to use care when cleaning. Do not use any abrasive pads that would scratch. Once you get a scratch in a plastic bucket it is very hard to sanitize. This is also why we don't recommend storing equipment in a bucket between uses as a fermenter. A hot PBW soak is often a perfect way to clean a bucket, followed by a Star San soak for killing bacteria. Bucket has external volume markings up to 5 gallons. 17.5" H x 12" Ø Please Note: Buckets are translucent and do not come with lids
Buckets are not designed to hold pressure
Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage
Food-Grade to 180°
Perfect for use as a 5-gallon batch beer fermenter or bottling bucket
Comes with a pre-drilled hole so you can pair it with the spigot of your choice—see recommended spigots below under "You Might Also Need"
Once you've upgraded to a carboy or other fermenter, the bucket will remain a reliable brewing tool for cleaning and sanitizing purposes
External volume markers provide a convenient reference point when filling the bucket with water to make cleaner or sanitizer solution
A six gallon food grade bucket for fermentation or bottling with a pre drilled hole and external volume markings up to five gallons. This bucket does not include a spigot. Our recommended spigots can be found below under You Might Also Need. To use as a fermenter you will need to pick up the optional lid, spigot, stopper, and an airlock.
If you use the bucket for fermentation be sure to use care when cleaning. Do not use any abrasive pads that would scratch. Once you get a scratch in a plastic bucket it is very hard to sanitize. This is also why we don't recommend storing equipment in a bucket between uses as a fermenter. A hot PBW soak is often a perfect way to clean a bucket, followed by a Star San soak for killing bacteria.
Please Note:
Buckets are translucent and do not come with lids
Buckets are not designed to hold pressure
Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage
Food-Grade to 180°F
The most affordable 5-gallon batch beer fermenter you'll find!
Food-grade plastic buckets make a perfect starter fermenter for beginner brewers—simply add a lid with stopper and airlock
Once you've upgraded to a carboy or other fermenter, the bucket will remain a reliable brewing tool for cleaning and sanitizing purposes
External volume markers provide a convenient reference point when filling the bucket with water to make cleaner or sanitizer solution
A food-grade six gallon plastic bucket perfect for all kinds of home beer or winemaking activities. Plastic buckets are often used as a fermenter, bottling bucket, or even sanitizer bucket. We go through thousands which helps keep our price down. If you want to use it as a fermenter you will also need to pick up the optional lid, stopper, and airlock. This bucket is also available in a version that includes a spigot (see recommended products below).
If you use this plastic bucket for fermentation be sure to use care when cleaning. Do not use any abrasive pads that would scratch. Once you get a scratch in a plastic bucket it is very hard to sanitize. This is also why we don't recommend storing equipment in a bucket between uses as a fermenter. A hot PBW soak is often a perfect way to clean a bucket, followed by a Star San soak for killing bacteria.
Bucket has external volume markings up to 5 gallons. 17.5" H x 12" Ø
Please Note:
Buckets are translucent and do not come with lids
Buckets are not designed to hold pressure
Lids are not gasketed and so do not always form a perfect, airtight seal. Not intended for long-term storage
Food grade up 180°F
Direct replacement of the 31" floating dip tube included with the FermZilla Pressure Kits. If you're looking for a floating dip tube to use with your homebrew keg, we recommend the Torpedo Buoy™, which includes an appropriately sized metal dip tube and features a higher quality silicone tubing. Kegland Part number: KL14076
Oxygen-Free Dry Hopping: Designed to allow dry hopping without exposing the batch to oxygen when used in combination with the 2" Hop Bong, 2" Butterfly Valve and additional accessories. Customizable with Accessories: Features undrilled ports for optional accessories such as the Temp Twister Cooling Coil and Thermowell, enhancing functionality and convenience. Improved WiFi Reading: The plastic lid improves KegLand RAPT Pill WiFi reading, ensuring better connectivity. Durable and Pressure-Resistant: Includes 4" and 2" Tri-Clamp ferrules, suitable for use up to 21 psi, with recommended PRV options for safe operation at specified pressures. Compatible with all Kegmenter Fermentation Kegs with 4" Tri-Clamp ferrule. See the Kegmenter Hop Bong Pressure Pack for a complete kit option. Upgrade your Kegmenter Fermentation Keg with this 4" Tri-Clamp Lid from KegLand. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid. This particular lid was designed to address the growing desire to dry hop without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you will be able to purge CO2 into the tube and expel all the oxygen inside it and dump freely into the vessel. The lid features closed ports that can be drilled out to install optional accessories like the Temp Twister Cooling Coil and a Thermowell. The plastic lid also allows for improved KegLand RAPT Pill WiFi reading compared to the Kegmenter fully encasing the Pill in stainless steel. Due to the large 4" Tri-Clamp diameter, it is difficult to get higher pressures without leaking, therefore we suggest using the lid up to 21 psi. If you do not already own any of the Hop Bong fittings listed below, the Kegmenter Hop Bong Pressure Pack is also available as a complete kit. Features: (2) PCO1881 Male Ports Recommended for use with Red (Gas In) & Yellow (Bev Out) Ball Lock Caps PRV Port This should only be used with a Red 35 psi PRV or the Yellow 17 psi PRV. 2" T.C. Ferrule 4" T.C. Ferrule Undrilled Ports (for optional accessories): Thermowell Port (see below for FermZilla Thermowell kit) (2) Temp Twister Ports Please Note: Temp Twister will need to be bent on a 20° Angle in order to fit on the curved lid and align vertically in the tank. Hop Bong To use the Pressure Lid with the 2" Hop Bong, we recommend the following fittings if you do not have them already: 2 x Red Ball Lock Cap (FE13) 1 x Yellow Ball Lock Cap (FE146) 1 x 4" Tri-Clamp, 3 Segment Clamp (H734) 1 x 4" Tri-Clamp Seal (FF401) 3 x 2" Tri-Clamp (FF20) 3 x 2" Tri-Clamp Seal (FF201) 1 x 2" Butterfly Valve (FE198) 1 x 2" Hop Bong (FE202) 1 x 2" Hop Bong Cap (FE204) 1 x PCO1881 PRV Cap (KG523) 1 x Red 35 psi PRV (FE101C) Please note: The last product photo is an example image of what the lid looks like fully fitted out with the Hop Bong and other accessories that are not included with the lid.
Adjustable relief valve installs on standard ball lock keg posts Use with any ball lock keg to control flow during closed pressure transfers Integrated pressure gauge can be swapped out with a digital gauge or large face dial gauge for easier, more accurate readings Adjustable black cap can be swapped out for color coded PRVs with a fixed pressure Low-profile design only measures 1.75" in height This easy to use and compact pressure relief valve is super handy for keg transfers. Using a ball lock quick disconnect as the main body, the valve easily snaps onto ball lock keg posts. Adjustable relief valves are a great way to limit oxygen exposure and regulate flow during closed keg transfers, The included gauge reads from 0-30 PSI and can be swapped out with a digital gauge or large face dial gauge for easier, more accurate readings. The black pull ring cap on the other end can be rotated for adjustments, or swapped to a range of color coded PRVs for a fixed pressure. This low-profile option only measures 1.75" in height. It works right out of the box but has several upgrade options as shown in the images. Warning: Never swap out the valve's standard PRV with a color coded PRV that exceeds the pressure rating of your vessel. Features: Duotight fitting where the gauge attaches This allows for upgrading the valve with a digital gauge or larger analog gauge Manual pull ring pressure relief This allows for you to not only adjust the pressure with the black rotary knob but also use the ring pull to instantly release pressure if you want to release manually Option for several color coded PRVs to be used (see below) Yellow - 17 psi Red - 35 psi Green - 65 psi Gray - 100 psi KegLand Part Number: KL29438
Replacement Polycarbonate Cup if you happened to damage or lose the reservoir for the 1.5" Tri-Clover Spunding Valve during routine cleaning and replacement of sanitizer solution post-fermentation. KegLand Part Number: KL27472
Automatically release pressure inside your fermenter during pressure fermentations Regulate beer flow during pressurized transfers from fermenter to keg Diaphragm spunding valves offer higher accuracy compared to spring & poppet spunding valves 8 mm Duotight inlet/outlet for use with 8 mm OD EVABarrier tubing or 8 mm Rigid Joiners The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. Pressure Fermentation
Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately you need a way to release excess pressure. You'll pressurize your vessel to your desired psi, but once fermentation begins and those hungry, active yeast start creating CO2, the pressure inside the vessel will increase. Attach a spunding valve and set it to your desired pressure, and it will blow off when the pressure gets too high and close up again when it's back to your desired psi. Pressure Transfers
Even if you don't have a pressurizable fermenter, you may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it's a good idea to have a bit of head pressure in the receiving keg, especially if you're transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process. Diaphragm vs. Poppet
With the poppet style spunding valve, a spring pushes against a poppet to keep the valve closed. When the poppet lifts up to open, the surface area the gas pushes against becomes larger, and the spring has to work harder to push the poppet down and reseal the valve. This can lead to more gas being released than intended, and the remaining pressure in your vessel may be at a lower psi than your spunding valve’s set psi. Instead of a poppet, the spring inside the BlowTie pushes against a diaphragm, which has an immensely larger surface area. This means the surface area that the gas pushes against while the diaphragm is closed is significantly closer to the surface area it pushes against when the diaphragm is open. This leads to higher accuracy, and the remaining pressure after excess gas is released will be much closer to your set blow off pressure. Set Up
The BlowTie spunding valve comes with 8 mm Duotight fittings on the inlet and outlet, and we recommend using it with EVABarrier 8 mm OD tubing (D1717 or D1718). You'll also need the flare Duotight fitting (DUO106) in order to attach it to a ball lock or pin lock disconnect. Dialing in your desired pressure is very simple. Although you would ideally use the BlowTie with the Push-In Pressure Gauge (D1160) and Duotight Tee Fitting (DUO109), as seen in the example photo, you can easily set the blow off pressure without it. To do this, simply pressurize an empty keg to your desired psi using your CO2 regulator. Before attaching the BlowTie to the gas post, be sure to turn the dial clockwise until it is fully closed. Once attached, slowly turn the dial counterclockwise until gas starts coming out, then slightly turn the dial back to stop the gas flow. The BlowTie is now set to your desired pressure. Specifications:
Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends 0-40 psi pressure rating Please note: the BlowTie does not come with the pictured accessories. Please see "You Might Also Need" below for the other products shown in the example photo. Kegland Part number: KL03643
Use the Fermonster Carboy Carrier to move your Fermonster, Plastic or Glass Carboy around with ease. The harness and strap handles are made from heavy-duty polypropylene, enabling you to haul up to 100 lbs of your wort or finished beer without the risk of losing your grip. Cradle your carboy with confidence and avoid spilling! The carrier comes with handles in two different positions for added convenience. Short handles for lifting and long handles for moving. The long handles are especially handy when lifting your carboy out of a top-loading fermentation locker.
Compatibility:
3, 5 and 6 gallon Plastic Carboys
3, 5 and 6 gallon Glass Carboys
3, 6 and 7 gallon Fermonsters
Take Care of the Carrier:
Avoid prolonged exposure to sunlight
Machine wash safe (low temperatures only)
Do not clean with bleach or products that contain bleach
Hang dry in the shade
Do not iron
Large plastic airlock for stainless steel variable capacity tanks, or other containers with a thin lid. Features a threaded shaft with back nut and washer.
Threaded shaft & locking ring: 1.75" diameter
Overall Length: 11"
Airlock Length Above Lid: 9"
Fits PET Carboys. A breathable Silicone stopper that acts as both a stopper and an airlock. Unique design allows CO2 pressure to escape but keeps Oxygen and airborne contamination out. Quickly became our stopper of choice for wine. Used by numerous commercial wineries. Also has great application for beer ferments: Will create a vacuum if fermenting wort cools (as opposed to pulling water in from your traditional airlock.) Air tight seal is great for extended fermented lager when CO2 production is still present but very slight.
The ported plastic carboys are pretty cool in that you can eliminate having to rack out of them. However, you need this tool to attach the nut onto a plastic ported carboy from the inside.
The wrench has a specially molded hex nut to hold the 5/16 inch barbed (FE347) or 1/2 inch barbed (FE347A) spigot nut, and a long handle so you can reach to the bottom of the carboy. The spigot wrench can be reused, you only need it during the installation and/or removal of the spigots.
5 Liter dark green jug. Includes a finger grip molded into the bottle. Sold individually.
This jug is an ideal option for small batch fermentations. Pair with 19.5mm x 28.5mm silicone stopper (FE523) to install an airlock.
Please Note: The thread style is A3380, 31.5mm ROPP finish. This is a specialty screwcap that we do not stock, as it is intended for use as a fermenter.
Perfect for fermenting small batches of beer, kombucha, wine, cider, mead, and more!
Clear glass allows you to monitor fermentation activity as it happens
Comes with a metal lid that won't crack like plastic and offers a much better seal
Includes S-shaped airlock and airlock grommet
This fermenter kit is great for those small one gallon batches. Whether you enjoy brewing small batches or want to test things on a small scale this is a great glass fermenter. This is also a great fermentation setup for making homemade kombucha!
This unit features a lug-finish glass jar with metal lid. Metal lids won't crack or break like plastic lids, and they provide a much better seal thanks to the thin foam liner underneath. Similar to mason jar lids, the metal lid will show signs of rust over time and need to be replaced, but this won't happen for some time with proper cleaning practices.
Includes:
Glass 1 gallon jar
Screw top lid with hole and airlock grommet
S-Shaped airlock
We recently discovered this premium breathable silicone barrel bung and were immediately impressed with its robust design and features. To start with, the built in tabs really help make bung removal effortless. But where the bung really shines is in its two-piece design. When set to the open position, the bung acts as an airlock and allows the release of CO2 while maintaining a seal against oxygen coming in. This makes the bung ideal for alcoholic or malolactic fermentation in barrels or tanks. When fermentation is over and you no longer want the bung to "breathe" out, you just push the center cap into the bung to create a firm seal and the FE497 becomes a solid stopper!
Fits most 30 and 60 gallon barrels as well as the hole in the lid of most Variable Volume tanks!
tapers from 1 7/8" to 2 1/4" diameter
Perfect for dispensing lemon water, iced tea, or pre-mixed cocktails
An aesthetically pleasing vessel for dispensing beverages at your home gatherings
Works well for fermenting small batches of beer, kombucha, and more!
A simple, glass beverage dispenser that will add a touch of class to your home bar or backyard cookout. Perfect for dispensing lemon water, iced tea, or pre-mixed cocktails. Includes plastic spigot. Additional spigot options can be found below.
Also ideal for fermenting 1 gallon batches of beer, kombucha, or any type of fermentation.
This optional lid is a great accessory if you want a more convenient way to move your Flat Bottom FermZilla around. Includes a silicone grommet for your airlock pre-installed.
This unique FermZilla lid piece does not require thread tape, o-rings or washers to form an airtight seal.
Please Note: This lid is not pressure rated.
KegLand Part Number: KL20848
Stainless steel spigot for wide mouth glass carboys, jugs, and beverage dispensers. Standard left to right turn.
Compatible with Farro Glass ported wide mouth glass carboys.
Threading: M16 x 1.25
Effortless Bung Removal: The ridge design ensures easy and hassle-free removal of the bung, simplifying barrel management. Effective Airlock System: Acts as an airlock, allowing CO2 to escape while keeping oxygen out, making it perfect for fermentation processes. Versatile Fit: Compatible with 30- and 60-gallon barrels, Variable Volume tanks, and 2" tri-clamp ferrules, offering flexibility across various setups. Multi-Size Replacement: Replaces stopper sizes #10, #11, and #12, with precise measurements for a perfect fit and easy assembly. We recently discovered this premium breathable silicone barrel bung and were immediately impressed with its robust design and features. To start with, the ridge really helps make bung removal effortless. The bung acts as an airlock and allows the release of CO2 while maintaining a seal against oxygen coming in. This makes the bung ideal for alcoholic or malolactic fermentation in barrels or tanks. Fits 30- and 60-gallon barrels as well as the hole in the lid of most Variable Volume tanks! Also fits perfectly in a 2" tri-clamp ferrule Replaces Stopper Sizes #10 , #11, #12 Stopper Measurements: 1.65" x 2.19" (42 mm x 55.5 mm) The flapper stopper protrudes roughly 2.5" from the stopper to allow for easy assembly Other available sizes include the Breathable Carboy Bung and the Universal Breathable Bung. All three size options can be purchased in one complete bundle with the Breather Bung Pack.
Perfect for fermenting small batches of beer, kombucha, wine, cider, mead, and more!
Clear glass allows you to monitor fermentation activity as it happens
Includes S-shaped airlock and airlock grommet
This fermenter kit is great for those small one gallon batches. Whether you enjoy brewing small batches or want to test things on a small scale this is a great glass fermenter. This is also a great fermentation setup for making homemade kombucha!
Includes:
Glass 1 gallon jar
Screw top lid with hole and airlock grommet
S-Shaped airlock
The Flat Twister Lid comes with 3 pre-drilled holes perfectly sized for the Duotight bulkheads that come with the Temp Twister Cooling Coil and FermZilla Thermowell. Lid o-ring included. This lid is only recommended for FermZilla users that will be using the Temp Twister and the Thermowell together. Kegland Part number: KL15059
This stainless steel thermowell is your best option of monitoring temperatures in the 27L or 55L FermZilla. Since the thermowell installs into the lid, the thermowell will be well positioned in the middle of the fermenter to provide an accurate core temperature reading. On the bottom side of the FermZilla's lid you'll find several convenient drill locations already molded into the plastic. The thermowell is long enough to work with either size FermZilla (or other fermenters!), so if you need to cut the tube down a bit, we recommend using one of these Pipe Cutters. The FermZilla will still be pressurizable after installing the thermowell, just be careful to drill the hole no wider than needed to fit the Duotight bulkheads. 23.6" long (60 cm) 5/16" OD (8 mm) 1/4" ID (7 mm) Made from 304 stainless steel Kegland Part number: KL14649
These handles are made from 304 stainless steel and held together with stainless steel bolts. Rated up to 220 lbs. Compatible with all sizes of FermZilla Conical, Flat Bottom, and All Rounder fermenters.
Kegland Part number: KL13079
#12 natural latex rubber stopper with 3/8 inch hole. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Top diameter 64 mm, bottom diameter 54 mm, length 27 mm
Strong new base for your FermZilla All Rounders! Comes with sticky dots to keep it firmly attached to your fermenter. Super easy to install!
If you have the Gen 3.2 FermZilla All Rounder, you can purchase the Hex Base and Easy-Grip Threaded Lid Ring to upgrade your fermenter. This makes it easier to pick up and move the fermenter and eliminates the need for the Stand Harness.
KegLand Part Number: KL47333
A perfect size, food-grade, bucket that is a perfect fermenter for doing 1 gallon fermentations. Ideal for your next small batch of homebrew or fruit wine. Also a great container to store grain in. Wide opening allows for easy cleaning.
Lid sold separately.
9-1/4" H x 9-1/2" D (without lid)
9-7/16" H x 9-15/16" D (with lid)
This clever drainer takes the hard work out of draining & drying out your carboy!
The Blue Carboy Drainer is a great way to drain your carboys without having to hold them upside down the entire time. It holds the carboy for you, in an inverted position, while the liquid drains. As a bonus, as long as your sanitized carboy is held upside down, it will remain sanitary and ready to fill. The mouth of the carboy is close to the ground resulting in a bit longer drying time than with other drainers, if you are using it for drying.
Please note that carboys fitted with neck handles will not fit in this drainer.
The Push-In Pressure Gauge comes with an 8 mm (5/16 in.) barb, specifically designed to be compatible with 8 mm Duotight fittings. The dial face is triple-scaled to read in psi, bar, and kPa.
8 mm (5/16") push-in barb
Rubber coated to protect gauge
0-150 psi / 0-10 bar / 0-1,000 kPa
Kegland Part number: KL07696
The Push-In Pressure Gauge is the ideal companion for the BlowTie spunding valve (FE960). It comes with an 8 mm (5/16 in.) barb, specifically designed to be compatible with 8 mm Duotight fittings. By pairing this pressure gauge with the BlowTie, you'll be able to easily set your blow off pressure when using the BlowTie for pressure fermentations or pressure transfers. The dial face is triple-scaled to read in psi, bar, and kPa. 8 mm (5/16") push-in barb Rubber coated to protect gauge 0-40 psi / 0-2.5 bar / 0-250 kPa Kegland Part number: KL07696
