Draft & Kegging Sale

Get Your Kegging Setup Under Pressure

Kegs, fittings, regulators, and CO2 gear — everything to go from bottling to draft, or restock what's already on tap.

$25 off any order of $200 or more
Applies across the whole Draft & Kegging collection
Enter code at checkout — no minimum brand or category mix required

Use code at checkout

$25 OFF $200

on Draft & Keg Kegging

KEGGING25 Copied

All brands KegLand (49) Torpedo Keg (34) CM Becker (12) Duotight (5) MB (5) XpressFill (5)

Show previous products

Torpedo Keg | Dip Tube | Beverage Out | 6 gallon | Corny Keg Part

Replacement Beverage Dip Tube for the standard 6 Gal Torpedo Keg.

Read more less

$12.99
Low stock!

PVC Free Gas Tubing Assembly - Pin Lock

Gas Tubing Assembly for Pin Lock Kegs. The assembly includes 5 ft of 5/16" Ultra Barrier Gas™ PVC Free Beer Tubing, pin lock gas-in connection (barb) and two hose clamps. EJ Beverages' cutting edge Ultra Barrier Gas™ tubing has a number of advantages over regular Vinyl tubing: Clear tubing with red stripe for identification as low pressure gas line PVC Free and BPA Free - containes no DEHP phthalates or other plasticizers Environmentally friendly production - does not emit dioxins Remains flexible at lower temperatures Temperature range of -40 to 125° F

Read more less

$14.99
Low stock!

Corny Keg Rinser | Pin Lock Quick Disconnect (QD)

Rinse out your pin lock corny keg without disassembling the keg posts and dip tubes Connect to your garden hose spigot and flush with water with the keg upside down Quick and convenient way to wash out residue from a spent keg before it hardens An inexpensive, time-saving assembly for rinsing out your Pin Lock kegs. You've just finished a keg of your homebrew. Most of us set that keg aside and clean it later when we brew up the next batch. As it sits it gets harder to clean and then we definitely have to disassemble the entire keg to scrub all the parts. Well for years our Metal Shop Manager and lead Product Designer, Darren Schleth, has been using a simple keg cleaner in our R&D brewery to rinse his kegs, while upside down, through the body connects. The keg is instantly rinsed while all the residue is still soft. The keg can then later be soaked with PBW and/or sanitized without having to remove the body connects or poppets. This saves lots of time. As employees at MoreBeer! saw this simple assembly everybody wanted one of their own. To use: Connect the brass garden hose attachment to a garden hose. Then connect the grey and black quick disconnects to the inlet and outlet body connects on your Pin Lock keg. Remove the lid and turn the keg upside down. Turn on the water. Water risnes through both the inlet and outlet dip tubes completely rinsing the inside of the keg.

Read more less

$24.99
Low stock!

Nitrogen Cartridge - 1.8 g
1 review

Here at the shop, many of us plan on using these nitrogen cartridges to push wine out of 5 gallon soda kegs, since the nitrogen does not go into solution. You could also use them in beer situations where you want to push out but not carbonate. Please be aware that the nitrogen will only fill 20% of the space that a 12g CO2 cartridge will because Nitrogen exerts a lower partial pressure than CO2. Nitrogen has a higher PSI than CO2 so these cartridges will not work with CO2 Mini Regulators. Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.

Read more less

$3.99
Body Connect - Pin Lock To Ball Lock Conversion Fitting (Gas In)

Use this handy fitting to convert your Gas Pin Lock to a Ball Lock connection.

Read more less

$7.99
Torpedo Keg | Dip Tube | Beverage Out | MegaMouth | Corny Keg Part

Replacement Beverage Dip Tube for the Megamouth Torpedo Kegs.

Read more less

$11.99 - $14.99
7.75 Gallon Sanke Keg | 1/4 bbl | Slim Quarter | US D-Style Spear | New | Stainless Steel Beer Keg | Certified Commercial Quality
1 review

Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear Slim Quarter Keg holds 82x 12 oz beers or 62x 16 oz pints A good middle-ground size with high-capacity but small enough to fit multiple kegs in larger kegerators or keezers Commercial quality construction—produced and tested in an ISO 9001 Certified facility Supply your brewery with the best kegs on the market with these 7.75 gallon 1/4 Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each keg is contructed entirely of Stainless Steel, ensuring a long serving life for your brewery. The quarter barrel keg, commonly referred to as a slim quarter or tall quarter keg, is a great option for bars and restaurants that want to offer a variety of beers but don't have the space for multiple full size kegs. Holds 82 x 12 oz beers (62 x 16 oz pints). Features: 7.75 gal (1/4 bbl) US Sanke keg 304 Stainless Steel Construction 23" Height, 11.5" Diameter MicroMatic D System (U.S. Sankey) Spear Working pressure is 43.51 psi (3.0bar)

Read more less

$134.99
Torpedo Keg Sleeve (10 & 15 Gal)

These neoprene keg sleeves are custom tailored to fit the Depth Charge series Torpedo Kegs. We were tired of poorly designed sleeves that dragged in the mud and interfered with fittings. The Torpedo Keg Sleeve is designed to only cover the area that needs insulation, leaving the chimes bare and the fittings easily accessible. These little guys will keep your keg colder longer, and give it a clean look while doing so. The sleeves are 6mm thick and feature stitched piping on the edges for exceptional durability. For standard or Slimline Torpedo kegs, see KEG650 or KEG651. SKU Size Diameter Height KEG653A 10 gal 15.5" 13" KEG653B 15 gal 15.5" 18"

Read more less

$32.99 - $39.99
Torpedo Keg Ball Lock Quick Disconnect (QD) | Replacement Plunger Gasket

Replace the plunger gasket on your Torpedo brand ball lock disconnects when it wears out. Not a bad idea to have a couple on hand, just in case!

Read more less

$1.49
O-ring For CO2 Piercer
2 reviews

This is the small o-ring that goes on the part that pierces the CO2 cartridge. Many times it will get blown out if someone removes the cartridge before the cartridge was really empty, blowing the o-ring off the valve. Also work as a friction o-ring on our sparge arm assembly's on the brew sculptures.

Read more less

$0.49
Flare Fitting - 1/4 in. Tee
1 review

Stainless Steel Tee with threaded outputs on all three sides. 1/4" Flare thread for use in gas line connections in a draft beer set up.

Read more less

$14.99
CMBecker Poppet | Corny Keg Part
2 reviews

Will fit most Cornelius kegs. This particular unit is made by CM Becker of Germany and is known for being of good quality.

Read more less

$10.69
Body Connect - Pin Lock To Ball Lock Conversion Fitting (Beverage Out)

Use this handy fitting to convert your Beverage Pin Lock to a Ball Lock connection.

Read more less

$7.99
Gas Tubing Assembly - Pin Lock Quick Disconnect (QD)
2 reviews

For connecting your Co2 gas tank to your homebrew style Pin Lock Keg. Includes pin lock gas in quick disconnect, 3 feet of gas line and two hose clamps.

Read more less

$16.99
ForgeFit® Soft Rubber Bumper for Brewery Hose Ends | 1"

ForgeFit's rubber hose bumper is the ideal choice for brewery hose ends. Rather than being made from rigid plastic, the soft silicone is designed to absorb impact and help protect hose end fittings that are being continuously picked up and dropped to the floor. The bumper will also keep the hose ends raised off the floor to keep the fittings sanitized and avoid contamination. The two large handles allow you to pick up a hot hose without grabbing onto it directly. This bumper requires some forceful stretching to get over the 1.5" TC fitting. 1.49" ID to stretch over most 1" brewery hoses.

Read more less

$24.99
Torpedo Mini CO2 Regulator | Replacement Cartridge Adapter

This adapter piece enables legacy Torpedo Mini CO2 Regulators (KEG965A) to be compatible with 74g CO2 cartridges that have a small unthreaded gap at the top of the neck—cartridges similar to KEG969. This piece now comes standard on the updated Torpedo Mini CO2 Regulator and is a direct replacement part for KEG965B.

Read more less

$5.99
MB® Medusa™ MultiHead Counter Pressure Bottle Filler | Gen 2
4 reviews

Premium Counter-Pressure Bottle filler that is designed for the smaller craft brewer or dedicated homebrewer to help make bottling day faster and more efficient The four separate filling heads have individual Stainless Steel 3-way control valves that allow for quick fill rates Only requires one person to operate A single PRV provides equal backpressure on all heads resulting in matching flow rates without adjustment Individual purge valves on each fill head allow for nearly all oxygen removal in a bottle, ensuring that the beer stays fresh for longer The removable drip tray is fully draining with a barbed outlet for constant filling and easy cleaning A purge valve on the reservoir helps make sure that foam never builds up 304 Stainless Steel Construction and easy-to-use functionality, all resulting in a top-of-the-line bottle filler Introducing the newly redesigned and updated G2 Medusa Multihead Counter Pressure Bottle Filler! This unique unit was designed in-house by the MB Pro Engineering team and purpose built for the smaller craft brewer or dedicated homebrewer. The Medusa will speed up bottling day while also reducing exposure to oxygen during the bottling process, resulting in higher quality beer with a longer shelf life. The Medusa Multihead Counter Pressure Bottle Filler can be adjusted to cater all bottling needs. All four heads can be operated individually, and the height, back pressure, and fill speeds can be adjusted for various bottle styles. We've done our best to pack this unit with features that will handle all jobs, while keeping costs as low as possible. Features: 3-way stainless steel valves on both inlet & back pressure sides of all fill heads. Improved Pressure Relief Valve has higher accuracy over fill rates, and directs foam into the drip tray rather than onto your bottles. Robust stainless steel frame stands on its own or can be easily bolted or clamped to a work surface Stainless steel fill reservoir keeps fill rates equal & reduces foaming Inverted fill tubes & reservoir purge means cleaner filling with even less possibility for foam. Dual TC Fill reservoir is easier to clean & allows for upgrades down the road (as they become available). Easily adaptable to fill from nearly any pressurized vessel. Height is adjustable from shorty bottles to growlers. Easy disassembly for cleaning, storage & maintenance, Sanitary 1.5" TC inlet for beer (Clamp and Gasket sold separately) 3/8" tube connection for CO2. Backpressure Bar allows for a single adjustment point for fill rates. No more adjusting PRVs on each fill head. Minimum Bottle Height: 6.9" Maximum Bottle Height: 16.5" Maximum Working Pressure: 15 PSI Dimensions: Footprint: 26-3/8" L x 8" W Drip Tray: 23-1/2" L x 5-1/2" W Overall Height: 25-3/8" Please Note: Filler valves include a Teflon gasket. Do not soak the valves in PBW which can corrode Teflon material after prolonged contact.

Read more less

$2,399.99
Replacement FFL Outlet for KegLand Core 360 Mini CO2 Regulator

Replacement FFL Outlet for KegLand Core 360 Mini CO2 Regulator KegLand Part Number: KL22828

Read more less

$5.49
Torpedo Keg | Dip Tube | Beverage Out | Slimline | Corny Keg Part

Replacement Beverage Dip Tube for the slimline Torpedo Keg

Read more less

$9.99 - $11.99
Deep Socket for Body Connects - 11/16 in.
1 review

For taking body connects off your kegs when cleaning and replacing o-rings on kegs with 11/16" body connects. There are two sizes of body connects. 11/16" and 7/8". When ordering please order the size that corresponds to body connects that you already have.

Read more less

$23.99
Low stock!

Faucet Quick Disconnect (QD) Assembly - Pin Lock

Complete assembly for conveniently serving beer out of a pin lock style keg. Commonly used to serve on the go because there is no beer lines to get in the way! Comes with QD faucet adapter, stainless faucet with stainless steel shank, faucet knob and Pin lock beverage out quick disconnect.

Read more less

$43.99
Low stock!

Pin Lock Corny Keg Socket
6 reviews

A good brewer knows the importance of having the right tool for the job. They also know the importance of being able to disassemble their kegs for cleaning and rebuilding. This handy socket is a must-have if you own pin lock style kegs, so that you can easily remove gas and beverage body connects. 3/8" drive.

Read more less

$29.99
Torpedo Keg Ball Lock Quick Disconnect (QD) | Replacement Top Screw O-ring Gasket

Replacement internal gasket for Torpedo Keg ball lock QDs. This O-ring helps seal off the internals of the QD, resting where the hex head top screw fastens into the body of the QD. 16mm x 2.7mm

Read more less

$1.49
Replacement Lid for Megamouth Torpedo Keg

Replacement lid for the Megamouth series ball lock Torpedo Kegs. Includes o-ring and PRV rated to 85 psi. This is an extra-large corny style keg lid that will only fit Megamouth Torpedo Kegs. For standard corny keg lid, see here.

Read more less

$29.99
Replacement Actuator Pin for KegLand Core 360 Mini CO2 Regulator

Replacement Actuator Pin / Thumb Screw Assembly for KegLand Core 360 Mini CO2 Regulator. KegLand Part Number: KL20039

Read more less

$10.99
Low stock!

Corny Keg Pin Lock Quick Disconnect (QD) Jumper Line

Connect two pin lock kegs together via their liquid out fittings. Handing for moving sanitizer or beer from one keg to the next. Use this fitting at a big party to connect kegs to pour both kegs.

Read more less

$16.99
Firestone Poppet | Ball Lock | Corny Keg Part
2 reviews

A replacement poppet for older, used Firestone brand ball lock kegs. It will fit the Firestone V Challenger, VI Challenger and Super Challenger kegs. Each keg used two poppets.

Read more less

$15.99
Body Connect adapter for Corny Kegs

Will thread into some body connects and form a seal with a dip tube gasket added. For use when making your own custom equipment. With ball lock QD's. Female thread is at 5/16-24 -5 45° flare (SAE J512).

Read more less

$6.99
Faucet, Shank & Drip Tray Upgrade Kit (Ball Lock)
7 reviews

If you're serving beer from a hand held faucet and are looking to upgrade your kegerator system this is your kit. All you need is a 1" hole saw to drill a hole and your ready to assemble. Easy! Comes with: D1255 - Faucet,Knob, and Shank Combo D1480 - Economy Drip Tray D1700 - 5 feet H950 - Hose Clamp Qty.2 KEG700- Beverage Out Ball Lock You save 10% buying this complete kit rather than piecing it all together separately. Cheers! Please Note: Keg Not Included

Read more less

$64.99
Low stock!

Cornelius Keg Barrel Top Up System | Argon or Nitrogen Tank & Regulator | Ball Lock

The Most Essential Barrel Accessory! Keep your wine safe and ensure the integrity of your barrel with this top-up system. We're all familiar with the fact that barrels lose volume over time - in fact the evaporation that leads to this is one of the benefits of aging wine in a barrel. However, let it go too far with out topping up and the excess headspace in the barrel will cause your SO2 levels to drop and open the door to oxidative or bacterial spoilage. That is why it is essential to keep your barrel topped up at all times! Our MoreWine! Topping system is based around the common 5 gallon Cornelius ("Corny") Keg. These kegs are relatively inexpensive, simple to work with and easy to get parts for. 5 gallons of topping wine is about the right amount to work with a new 30 gallon barrel. The best part about topping up your barrel from a keg is that the wine that remains in the keg is always protected by a layer of the inert gas that you used to push the previous wine out, so it doesn't matter how long the wine sits in the keg! This kit includes the Argon/Nitrogen tank and regulator for you to push the wine out of the keg, and all the tubing and other parts that you need to make it work, as well as comprehensive instructions. Kit Includes: New High Quality Italian 5 gallon "Corny" keg 20 cu. ft. Argon/Nitrogen tank Argon/Nitrogen regulator Tubing and hardware to connect the gas regulator to the keg Tubing and hardware to dispense wine from the keg into your barrel Cleaning brush for your dispense line Comprehensive instructions for assembly and use

Read more less

$484.99
15.5 Gallon Sanke Keg Pallet of 24 | 1/2 bbl | Full-Size Keg | US D-Style Micromatic Spear | New | Stainless Steel Beer Keg | Certified Commercial Quality

Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear Half Barrel Keg holds 165x 12 oz beers or 124x 16 oz pints Ideal for large-batch brewers where you want to clean and sanitize as few kegs as possible Commercial quality construction—produced and tested in an ISO 9001 Certified facility Supply your brewery with the best kegs on the market with these Full Size 15.5 gallon Half Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each 15.5 gal keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery. Holds 165 x 12 oz beers (124 x 16 oz pints). Features: Full Size 15.5 gal (1/2 bbl) US Sanke keg 304 Stainless Steel Construction 23.25" Height, 16.8" Diameter Produced in an ISO 9001 Certified Facility Drop In spears produced by MicroMatic Working pressure is 43.51 psi (3.0bar)

Read more less

$3,229.99
MB® Keg Washer | 2 Head | Fully Automated | 220V Single Phase

Clean and sanitize two full size kegs per 5-minute cycle Fully automated PLC controller executes every step of the cleaning, rinsing, and sanitizing process Optional hookup for steam cleaning Preset programs 1/2 bbl, 1/4 bbl and 1/6 bbl sanke kegs This fully automated keg washer will efficiently wash two kegs simultaneously, enhancing productivity and streamlining your brewing operations. The Keg Washer has two reservoirs, one is heated for caustic and the other holds sanitizer to ensure a thorough and effective cleaning process. All steps are easily configurable in the computer control unit. Those seeking an extra level of sanitization, this system comes equipped with an option to use steam for an extra level of sanitization. Features: Washes two kegs simultaneously (~5 min per cycle for 1/2 bbl kegs) 21-gallon heated Caustic reservoir 21-gallon sanitizer reservoir Size Optional steam hook up Uses compressed air to empty kegs Stainless construction Water resistant enclosures Preprogrammed Siemens PLC controller (preset for 1/2 bbl, 1/4 bbl and 1/6 bbl kegs) Easily reconfigured for custom applications 6kw heating element in the caustic reservoir. Dimensions: 43.3" L x 29.5" D x 48.3" H With Kegs Installed: 43.3" L x 40.1" D x 57" H Keg Loading Height: 35" Shipping Dimensions: 48" x L 33" W x 56" H Hook Ups: 208/220V Single Phase electrical Compressed Air CO2 Water

Read more less

$10,999.99
Torpedo Keg | Dip Tube | Beverage Out | 10 gallon | Corny Keg Part

Replacement Beverage Dip Tube for the standard 10 Gal Torpedo Keg.

Read more less

$13.99
Low stock!

Counter Pressure Accessory Package - Pin Lock Quick Disconnect (QD)

Connects your new Counter-Pressure filler to your existing ball lock kegging system with a convenient, sealing quick-disconnect system. Having everything you need all in this kit makes set-up & use of your counter-pressure filler easier. If you have the Counter-Pressure bottle filler then this set is a must have! Includes: Hardware to connect filler to gas system: Gas line tee, quick disconnect set, 6' of gas line. Hardware to connect filler to keg: Threaded, black Beverage-Out Quick Disconnect, related flare fittings, 5' of beer line. To Install: Shut off your gas. Cut your existing gas line assembly and clamp the Co2 Tee in that place. Clamp the gas line and beverage line to the Bottle Filler. Gas line on the larger barb fitting, beverage on the smaller barb. Make sure the counter pressure filler is closed by placing the valve handle perpendicular to the valve. Attach the beverage pin lock quick disconnect to your keg. Never attach a beverage out fitting to your keg without it being in a closed system. Connect the gas line quick disconnect. Finally turn your gas back on. You're ready to fill.

Read more less

$39.99
Beer Faucet Adapter (w/o Collar)

Beer Faucet Adapter (w/o Collar)

Read more less

$6.09
Low stock!

Gas Add On Assembly - Ball Lock Quick Disconnect (QD)
2 reviews

Use this assembly to tee off from your CO2 system to add another keg to your existing draft system. Includes a Ball lock gas in quick disconnect.

Read more less

$16.49
Firestone Poppet | Pin Lock | Corny Keg Part
1 review

For Firestone brand Pin Lock kegs. Also fits older John Wood pin lock kegs. Each keg used two poppets.

Read more less

$17.99
Poppet | Firestone Challenger | Corny Keg Part

This is a pretty rare poppet that we do not come across very much. However we do offer it. It fits older Firestone Challenger kegs as well as an older kegs labeled John Wood 85. Each keg used two poppets.

Read more less

$8.99
Low stock!

Faucet, Shank & Drip Tray Upgrade Kit (Pin Lock)
1 review

If you're serving beer from a hand held faucet and are looking to upgrade your kegerator system this is your kit. All you need is a 1" hole saw to drill a hole and your ready to assemble. Easy! Comes with: D1255 - Faucet,Knob, and Shank Combo D1480 - Economy Drip Tray D1700 - 5 feet H950 - Hose Clamp Qty.2 KEG740- Beverage Out Pin Lock You save 10% buying this complete kit rather than piecing it all together separately. Cheers! Please Note: Keg Not Included

Read more less

$64.99