Get Your Kegging Setup Under Pressure

Show previous products

• 

  Nitrogen Cartridge - 18 g

  5 reviews

  18 gram disposable Nitrogen cartridge. Often used to push wine, mixed drinks, coffee, or any other liquid where you do not want carbonation. Nitrogen, unlike CO2, will not dissolve into solution. Kegged drinks can be mixed up and will stay fresh for long periods of time. 5/8"-18 threaded neck.    Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.   

  Read more less

  $27.99

• 

  Cornelius Poppet | Common | Corny Keg Part

  12 reviews

  These replacement poppets will keep your old kegs holding pressure just like new.   These are the most common poppet that we sell. They will fit nearly every keg out there. Technically they are for Cornelius brand "Spartan" and "Super Champion" kegs. They will also fit Cornelius brand Pin Lock "R" kegs. Each keg uses two.  

  Read more less

  $6.99

• 

  XpressFill XF4500 | Carbonated Beverage Bottle Filler | 4 Spout

  Counter pressure bottle filler for carbonated beverages Flow stops automatically at the perfect height in the bottle neck every time, regardless of bottle variations Accommodate bottles up to 13.5" tall and up to 4" in diameter Made to order in the United States The Carbonated Beverage Filler is a counter-pressure machine that fills bottles with pre-carbonated beverages without losing carbonation; The XpressFill Carbonated Beverage Filler uses a high-tech sensor probe that shuts off the fill at the perfect height in the bottle neck every time, regardless of bottle variations. Even though this machine is designed for carbonated beverages, it can also be used for still products as long as they are fed to the filler using a lightly pressurized keg or pump. That means that you can use this for your normal bottling as well as for those special bottle-conditioned beers too! The Carbonated Beverage Filler is also suitable for filling Charmat-style sparkling wines, at a maximum operating pressure of 60 psi. The XF4500 requires that you also have an air compressor, which is used to hold the bottle rest in place, a canister of CO2, to pressurize and carbonate your tank or keg, and a pressurized container, to allow your product to flow from high to low pressure, through the machine. The filler will accommodate bottles up to 4 inches in diameter and up to 13.5 inches tall. This covers most standard sized 12 oz, 22 oz and 750 mL bottles. Each bottle filler is hand built to order in the California factory. Lead times average about 3 weeks. Features & Specifications: 400 Bottles per Hour capacity (12 oz) All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Maximum Bottle Dimensions: 4" D x 13.5" H Maximum Operating Pressure: 60 psi Weight: 40 lbs Dimensions: 16 inches wide x 21 inches high x 15.5 inches deep Requires 1.5A of 115V 50/60Hz power

  Read more less

  $6,495.00

• 

  KOMOS® Homebrew Kegging Kit | Ball Lock Keg | Slimline Torpedo Keg | Premium Dual Gauge Regulator | Easy Push Connect Fittings

  2 reviews

  Everything you need to start enjoying your delicious beer on draft! No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator Featuring the hottest homebrew keg around—the all-stainless, stackable Slimline Torpedo Keg EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap! From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 1.5, 2.5, or 5 gallon Slimline Torpedo Keg. These are the hottest homebrew kegs on the market, featuring stackable base, rolled stainless handles, and labeled In and Out body connects for your QDs. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup. Included: KOMOS Dual Gauge Regulator KOMOS 5 lb aluminum CO2 cylinder Slimline Ball Lock Torpedo Keg (1.5, 2.5, or 5 gal) EVABarrier beer & gas lines Duotight Ball Lock Quick Disconnects (QDs) Duotight-compatible plastic picnic faucet KOMOS 7-in-1 Multi Tool Wrench Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.

  Read more less

  $299.99 - $329.99

• 

  Used Ball Lock Keg | Corny Keg | Pressure Tested, Cleaned & Sanitized | 5 gal. | 4 Pack

  39 reviews

  Set of 4 used ball lock kegs and 4 complete o-ring rebuild kits These kegs are cleaned, de-labeled, sanitized, pressure tested and guaranteed to hold pressure upon delivery Used kegs may have minor cosmetic damage but are in perfect working order Rubber top and bottoms protect floors from dings Set of four used ball-lock kegs and four complete o-ring rebuild kits plus free shipping. Each rebuild kit includes 5 o-rings - one for the lid, 2 for the body connects, and 2 for the dip tubes. These ball lock keg 4 packs ship free, which means a great value for you! A great price on unrebuilt ball lock kegs. To totally rebuild the keg you should also consider a new relief valve and poppets (part number listed below). To clean the inside Alkaline Brewery Wash works great for eating away residue. We recommend taking these steps yourself before and after each use. The body connnects on a keg are the metal posts where the quick disconnects attach too. They should be removed for cleaning and sanitizing before each use. Ball lock kegs can come with either 11/16" body connects or 7/8" body connects. We sell deep sockets for the removal of either one. So if you do not have these sockets at home and want to make sure you can disassemble the kegs you may want to purchase both sockets below. Then you will always be covered as your keg collection grows. Ball lock corny kegs are approximately 8.5" Diam. x 25" Height. 26 1/4" Height with flare fittings. Measurements may vary slightly. All kegs are pressure tested in our manufacturing facility and are guaranteed to hold pressure upon delivery.

  Read more less

  $279.99

• 

  KegLand Mini Keg Neoprene Parka | Mini Keg Insulating Jacket

  Super thick 8mm neoprene insulating jacket will keep your mini keg cold while you're on dispensing on the go Heavy duty shoulder strap for easy transportation Glow in the dark printed logo and high-vis strap for improved visibility after the sun has set Pocket sleeves for extra 16g CO2 cartridges The Mini Keg Parkas prioritize both insulation and portability. The 8mm neoprene insulating jacket keeps your beverage cold while dispensing. Features a glow-in-the-dark printing for improved visibility after dark, pocket sleeves for extra 16g CO2 cartridges, and heavy-duty shoulder strap for easy transportation. Please Note: The 8L and 10L Mini Kegs share a parka size. If using it on the 8L Mini Keg, there will be a few inches of extra material at the top which you can leave as is or fold down if you prefer.

  Read more less

  $16.99 - $21.99

• 

  KegLand Ball Lock Quick Disconnect (QD) | Beverage Out | Stainless Steel | Barbed

  304 cast stainless steel ball lock quick disconnect made for high-durability Black ring above the outer bushing to identify the QD for beverage use Compatible with all ball lock style homebrew kegs 1/4" barb connection This is a ball-lock type quick disconnect that is constructed from stainless steel for lifetime longevity. 1/4" barb. This QD is for the Bev Out side. See here for the Gas In QD. 2 1/8" H Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless. Kegland Part Number: KL02998

  Read more less

  $18.99

• 

  MB® Manual Keg Filler | Single Station

  Single station manual keg filler assembly makes a simple solution for small volume keg filling runs Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg Easily fill Sanke kegs with the MB Keg Filler. Simply connect to your brite tank and purge with beer. The high-quality stainless steel keg couplers have had the check valves removed so beer and CO2 can flow backwards when needed. Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution. Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg—foam in the tubing indicates you're filling too quickly, while beer in the tubing indicates the keg is full. Stainless Steel D-style sanke couplers Reinforced silicone tubing on beer side Clear vinyl tubing on gas side    

  Read more less

  $208.99

• 

  Torpedo Keg Ball Lock Quick Disconnect (QD) Kit | Barbed | Gas In & Bev Out

  1 review

  $43.99

• 

  PCO1881 Pressure Relief Valve Cap

  Designed for use with the PCO38 Tapping Head. With female PCO1881 threads, it can also be used with the FermZilla Collection Container or Hop Bong Sight Glasses. NOTE: This is the cap only. It does not include a PRV. See below for the PRV that best suits your needs. Warning: Never exceed the pressure capabilities of your vessel. PRV's are not spunding valves! KegLand Part Number: KL20176

  Read more less

  $4.39

• 

  Torpedo | Dip Tube | Beverage Out | Corny Keg Part

  1 review

  Replacement Beverage Dip Tube for the standard Torpedo Kegs.

  Read more less

  $9.99 - $11.99

• 

  AEB Ball Lock Keg | Corny Keg | 2.5 gal.

  44 reviews

  New Kegs are trouble-free for years Rubber top and bottoms protect floors from dings Perfect laser welds ensure easy sanitation and reduced risk of contamination Made in Italy by AEB, a long-time manufacturer with impeccable attention to detail Imagine this…. you’re out camping with friends, and one of your buddies says he would love to have a cold brew. Then just picture the looks on their faces as you pull your brand new Cornelius Keg out of your cooler, full of your rich home brew! This 2.5 gallon corny keg is perfect for the serious home brewer who loves to brew ½ batches, or is just tight on kitchen space. It will fit pretty much anywhere from coolers to backpacks, in your keezer, or in your fridge. You’ll love the rubber tops on these 2.5 gallon kegs because they have two handles and are easier to stack! It is versatile, travels well and just looks cool! The quality of these Italian-made cornelius kegs is undeniable. They are welded by laser under inert gas which means there are no nooks or crannies where bacteria can hide. They may cost more than kegs made in China but the quality difference is a perfect batch versus a ruined one. Quality is important because your beer may sit in these kegs for months. If bacteria gets into a bad weld they are going to very hard to kill. Key Features: High quality Italian made ball-lock style kegs with rubber top and bottom Kegs are 15" tall, x 8.25" diameter and weigh 7.5 pounds. Max working pressure of 130 PSI.

  Read more less

  $153.99

• 

  Torpedo Keg | Ball Lock Keg | Stainless Steel Corny Keg | Low2 Keg Lid O-Ring | Superior Oxygen Barrier Properties | 10 Gallon

  8 reviews

  Super-sized corny keg, great for bigger batches and fermentation Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg! Brand new, all-stainless construction ball lock keg Stackable with ball lock quick disconnects in place Etched In and Out labels near the keg posts for easy identification Rolled handles for a comfortable grip Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams Look out below! The Torpedo Keg Depth Charge series just dropped and they're set to send blast waves through the homebrew world. Large-scale homebrewers will appreciate the ability to fit their entire batch into a single 10-gallon ball lock keg, and you can expect the same great features that have made Torpedo Kegs such a hit. Laser welded construction for superior quality, rolled stainless steel handles that will last a lifetime, and stackable design that won't interfere with your fittings. Quality First The first thing we at MoreBeer! check out is interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. These kegs are machine welded and exceed our standards for quality. The weld quality is possible because these kegs made by an ISO certified commercial keg manufacturer. Cool Features Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving, which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. In and Out is etched near the keg posts for easy identification, which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake. Low2 Keg Lid O-ring Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Specifications: Total Capacity: 10.1 gal. Max Pressure: 130 psi PRV Rating: 85 psi Height: 18.5" Diameter: 16.05" Made from 304 Stainless Steel

  Read more less

  $239.99

• 

  The Torpedo Keg | Party Bomb | Portable Keg System

  1 review

  You show up to your next keg party or get together and non-chalantly reveal the Party Bomb. It's 11:00AM so you filled the Party Bomb with mimosas, part delicious part nutritious. If your a homebrewer maybe you even made beermosas. You get a few raised eyebrows as you set up. Now some people are walking by just to get a good look. They know something is going down. They're wary because it is a lot of stainless steel, and it in a different setting you might be a threat. But here in this social setting their interest is piqued. You are all business... you thread in a disposable 74gram co2 cartridge to keep the bubbly bubbly and then, click, the regulator is attached and you have positive pressure. Then click, on goes the stainless faucet assembly. Your locked and loaded. With a flick of your wrist the first mimosa is poured. Now everyone gets it, your here to party and they have never seen anything like this before. Boom...that, my friend, is how a party is started and legends are made. But of course you are not limited to mimosas. You can fill the Party Bomb with beer, wine, sangria, cocktails, margaritas, home made sodas or anything else you can dream up. Works with either CO2 cartridges (for carbonated beverages) or Nitrogen cartridges (for still beverages). Show up to your next poker tournament with a keg of Manhattens on nitrogen, ...hello most interesting man in the World, or to your next swim meet with a keg of white sangria. Get it filled at your local brewpub and keep beer on tap in your fridge. Beverages will stay fresh and ready to pour for weeks. Please share your recipes in the reviews section! Included In the Torpedo Keg Party Bomb: • 1.5, 2.5, or 5 Gallon Torpedo Keg • Stainless steel beer faucet assembly with stainless steel Torpedo brand quick disconnect to attach to keg • Mini-Regulator with Torpedo brand quick disconnect to attach to keg • (2) 74gram disposable co2 cartridges   Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States. Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

  Read more less

  $274.99 - $299.99

• 

  Torpedo Keg Ball Lock Quick Disconnect (QD) | Gas In | Stainless Steel | Barbed

  17 reviews

  Heavy-duty ball lock quick disconnect made from 304 stainless steel for lifetime longevity Etched "In" label to clearly identify the QD for beverage use Pairs perfectly with stainless steel Torpedo Kegs and compatible with all ball lock corny kegs 1/4" barb connection Your Kegs are made out of stainless steel, why settle for plastic Quick Disconnects? Upgrade your serving setup to fully Stainless with a pair of Torpedo Ball Lock QDs! These hefty pieces are constructed of 304 SS, designed for lifetime longevity. Printed clearly with "In" and "Out" so even after a few they're easy to work with. Available for both Beer Out and Gas In, with either Barbed or Flared connections. See YMAN's below for the appropriate connectors! Perfect with our Torpedo Kegs, these will work with any Ball Lock Corny Keg. Features: 304 SS Construction - Built to last a lifetime 1/4" Barb connection Clearly Labeled Ball Lock Gas In 2" Height

  Read more less

  $24.99

• Low stock!

  Counter Pressure Accessory Package - Ball Lock Quick Disconnect (QD)

  23 reviews

  Connects your new Counter-Pressure filler to your existing ball lock kegging system with a convenient, sealing quick-disconnect system. Having everything you need all in this kit makes set-up & use of your counter-pressure filler easier. If you have the Counter-Pressure bottle filler then this set is a must have!   Includes: Hardware to connect filler to gas system: Gas line tee, quick disconnect set, 6' of gas line.   Hardware to connect filler to keg: Threaded, black Beverage-Out Quick Disconnect, related flare fittings, 5' of beer line.   To Install: Shut off your gas. Cut your existing gas line assembly and clamp the Co2 Tee in that place. Clamp the gas line and beverage line to the Bottle Filler. Gas line on the larger barb fitting, beverage on the smaller barb. Make sure the counter pressure filler is closed by placing the valve handle perpendicular to the valve. Attach the beverage ball lock quick disconnect to your keg. Never attach a beverage out fitting to your keg without it being in a closed system. Connect the gas line quick disconnect. Finally turn your gas back on. You're ready to fill.

  Read more less

  $39.99

• 

  Body Connects - Pin Lock to Ball Lock Converter - Set

  4 reviews

  Convert any pinlock keg over to a ball lock keg. Ideal for any homebrewer that has their home draft setups already assembled with ball lock fittings. Includes both gas and beverage body connects.

  Read more less

  $15.49

• 

  Torpedo Keg Pressure Pack - CO2 Regulator & Quick Disconnect (QD)

  6 reviews

  Everything you need to pressurize your keg on the go. Comes with a mini regulator, CO2 cartridge, and quick disconnect. A portable mini-regulator with all the features of a full sized regulator! Perfect for parties and gatherings where you don’t want to haul around a large canister and hoses. A lot of great features packed into a very small package. The regulator has a range of .5-1.5 bars (7-21 psi). This means that, unlike KEG950 that shoots in CO2 at fixed pressure, the mini-reg allows you to precisely dial in pressure and keep it there. It utilizes a disposable 74 gram CO2 cartridge, which is the largest size that can be shipped full. This is a two stage mini-regulator, meaning that it takes the pressure down from 800psi (cartridge pressure) to a lower pressure and then to your set pressure of around 10psi. Two stage regulators are the only way to have consistent pressure. One 74 gram cartridge will typically dispense one 5 gallon keg. The mini CO2 regulator does not have an internal check valve. To add a check valve, use the regulator with KEG741.   Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.  

  Read more less

  $109.99

• 

  Gaskets | Body Connect | Corny Keg Part

  The gaskets on the body connects that the ball or pin lock fittings slide over. 7/16" ID with a 3/32" cross section. Made of FDA BUNA-N rubber. We also use this as a replacement for the smaller compression ring in our 1/2" Compression fittings so that you can create a snug fit in a Sanke keg conversion kit without permanently compressing a ring on the pick up tube.

  Read more less

  $0.99

• 

  Neoprene Insulating Keg Parka for Oxebar Mono PET Keg | 8L

  Keep your beer colder for longer with the insulating neoprene material Prevent dings and scratches during transport with an internal bump cap Easily carry your keg using the removable shoulder strap The zippered design makes it simple to put on and take off Tailormade for the 8L Oxebar Mono PET Keg Keep your beverage colder for longer with the Oxebar Neoprene Jacket. This parka is more than just a cozy sleeve for your keg; it's designed with a rigid internal "bump cap" to prevent those annoying scratches and scuffs that can happen when your keg is being moved around. Made from durable neoprene, this jacket helps maintain the temperature of your beverage, whether you're taking it to a party or just keeping it chilled in the fridge. The Oxebar Neoprene Jacket protects your keg while helping your beer stay crisp and cold. KegLand Part Number: KL42895

  Read more less

  $32.99

• 

  15.5 Gallon Sanke Keg | 1/2 bbl | Full-Size Keg | US D-Style Spear | New | Stainless Steel Beer Keg | Certified Commercial Quality

  5 reviews

  Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear Half Barrel Keg holds 165x 12 oz beers or 124x 16 oz pints Ideal for large-batch brewers where you want to clean and sanitize as few kegs as possible Commercial quality construction—produced and tested in an ISO 9001 Certified facility Supply your brewery with the best kegs on the market with these Full Size 15.5 gallon Half Barrel US Sanke Kegs.  Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards.  Each 15.5 gal keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery. Holds 165 x 12 oz beers (124 x 16 oz pints). Features: Full Size 15.5 gal (1/2 bbl) US Sanke keg 304 Stainless Steel Construction 23.25" Height, 16.8" Diameter Produced in an ISO 9001 Certified Facility Drop In spears produced by MicroMatic Working pressure is 43.51 psi (3.0bar)  

  Read more less

  $144.99

• 

  MB® Stainless Steel Carbonation Stone | 7" Long | 1.5" Tri-Clamp

  1.5" T.C. carbonation stone for 1 & 2 bbl MB Pro conical fermenters and brite tanks. Specifications: 2 micron Overall Length: 7" Single-piece design Made from Stainless Steel

  Read more less

  $231.99

• 

  Replacement Seal Kit for KegLand Core 360 Mini CO2 Regulator

  Contains the o-rings for the piston, the red inlet washer, MK4 seat assembly o-ring, 2 x barb MFL outlet o-rings and a thumb screw o-ring. For instructions on replacing the seals and/or general maintenance please refer to the product manual below. KegLand Part Number: KL12584

  Read more less

  $7.69

• 

  16g Unthreaded CO2 Cartridge | Pack of 6

  Unthreaded cartridges can be used with handheld CO2 injectors, the 128 oz Growlerwerks uKeg, as well as some mini keg systems. Unthreaded cartridges are not compatible with our mini CO2 regulators.

  Read more less

  $13.99

• 

  8 gram CO2 Cartridges - 10 Pack

  8 reviews

  Standard 8 gram CO2 cartridge replacement. Package contains 10 CO2 cartridges.  Works with the GrowlerWerks pressurizeable uKeg Growler. Mr.Fizz 8-gram CO2 Cartridge Features: 99.95% pure CO2 Fits all Seltzer Bottles NonRefillable one-time use only Cartridges measure approx. 2.5" long x 11/16" Diameter 8 gram Co2 Cartridges 10 Cartridges per box   Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.   

  Read more less

  $9.99

• 

  Torpedo Mini CO2 Regulator

  Leave your bulky CO2 regulator and cylinder at home! This Mini CO2 regulator uses 74g cartridges for convenient mobile draft dispensing Dial in your ideal serving pressure just as you would with your standard regulator A portable mini-regulator with all the features of a full sized regulator! Perfect for parties and gatherings where you don’t want to haul around a large canister and hoses. A lot of great features packed into a very small package. The regulator has a range of .5-1.5 bars (7-21 psi). This means that, unlike a button-activated CO2 injector that shoots in CO2 at a fixed pressure, the mini-reg allows you precisely dial in pressure and keep it there. It utilizes a disposable 74 gram CO2 cartridge, which is the largest size that can be shipped full. This is a two stage mini-regulator, meaning that it takes the pressure down from 800 psi (cartridge pressure) to a lower pressure and then to your set pressure of around 10 psi. Two stage regulators are the only way to have consistent pressure. One 74 gram cartridge will typically dispense one 5 gallon keg. This is the regulator only. Cartridges and quick disconnect (KEG730) sold separately. Please Note: This product is only eligible for ground shipment in the Contiguous United States. No air shipment or shipment to Hawaii or Alaska. The mini CO2 regulator does not have an internal check valve. To add a check valve use the regulator with KEG729 or KEG741.

  Read more less

  $74.99

• 

  Universal Body Connect for Gas and Bev - Ball Lock

  This nifty ball lock post is compatible with both gas and liquid ball lock disconnects. A great way to modify your homebrew kegs so you can daisy chain them together, or hook up your gas line to the bev out dip tube to carbonate your beer faster. It is important to note that due to dimensional differences between gas and liquid posts, this item will not form as snug a fit as a dedicated post for gas disconnects.  We do not recommend this to be used as a dedicated gas post. Please note that this is just the post. You will need to purchase the poppet and spring separately. Thread: 19/32-18 Kegland Part Number: KL08662

  Read more less

  $10.99

• 

  XpressFill XF4400 | Open Fill | Carbonated Beverage Can Filler | 4 Spout

  Suitable for carbonated beverages such as beer and kombucha Purges with CO2 prior to filling Adjustable shelf to accommodate cans up to 11.5" tall and 4" in diameter Made to order in the United States The XF4400 can filler is designed for the Artisan Craft Person looking to fill cans with carbonated beverages in a simple and affordable manner. The filler can accommodate most cans sizes with its adjustable shelf, allowing great flexibility, and is suitable for carbonated beverages such as beer and kombucha.  The XF4400 is based on the XpressFill Level Filler with modified valves and flow path diameters resulting in a much better flow of product with less foaming and better CO2 retention. The filler will accommodate cans up to 4 inches in diameter and up to 11.5 inches tall. Each bottle filler is hand built to order in the California factory. Lead times average about 3 weeks. Features & Specifications: 600 cans per hour capacity (12 oz) All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Maximum Can Dimensions: 4" D x 11.5" H Maximum Operating Pressure: 12 psi Weight: 34 lbs Dimensions: 16" wide x 17" high x 15.5" deep Requires 0.7A of 115V 50/60Hz power  

  Read more less

  $3,995.00

• 

  KegLand Oxebar Mono PET Keg | Replacement Graduation Sticker

  Replacement graduation sticker for the Oxebar 5.2 Gallon / 20L PET keg (B286). It is white text displayed over a transparent backing sticker. Please follow the directions on the sticker on how to apply this to your Oxebar tank correctly. Oxebar Keg in photo is not included. KegLand Part Number: KL38010

  Read more less

  $4.39

• 

  Megamouth Torpedo Keg | Replacement Keg Lid O-Ring

  Extra-large keg lid O-ring for use with the Megamouth series ball lock Torpedo Kegs. This is an extra-large corny style keg lid gasket that will only fit Megamouth Torpedo Kegs. For standard corny keg lid, see here.

  Read more less

  $5.99

• 

  Torpedo Keg Ball Lock Quick Disconnect (QD) | Beverage Out | Stainless Steel | 1/4" MPT

  2 reviews

  Heavy-duty ball lock quick disconnect made from 304 stainless steel for lifetime longevity Etched "Out" label to clearly identify the QD for beverage use Pairs perfectly with stainless steel Torpedo Kegs and compatible with all ball lock corny kegs 1/4" male pipe thread connection For far too long ball lock disconnect fittings have come in only two options -- barb or flare. Torpedo Keg said nuts to that! Then they put down the jar of Planters, pulled out the drawing board and designed this disconnect with 1/4" MPT threads. Made from all stainless steel, we used the gas-in version of this fitting to make our Ball Lock Spunding Valve. We're not sure what else it will be used for, but we know our customers, and we're excited to see what you crafty folks come up with! Features: 304 SS Construction - Built to last a lifetime 1/4" MPT Clearly Labeled Ball Lock Bev Out 2" Height Please note: this is not a flared disconnect. The connection is 1/4" male pipe thread.

  Read more less

  $24.99

• 

  CMBecker Pin Lock Quick Disconnect (QD) | Gas In | Barbed | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA

  2 reviews

  The highest quality plastic ball lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs 1/4" barb for 1/4" or 3/16" ID draft line CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Gray plastic clearly identifies the disconnect as the gas in QD This is a high quality fitting made by CM Becker in Germany. Pin Lock Gas-In quick-disconnect is fitted with a barbed end for easy attachment of your gas line. Gray top and base denote that this unit is used on gas side. 2 pin. 1/4'' barb fitting for easy attachment of gas line.  

  Read more less

  $7.99

• 

  CMBecker Pin Lock Quick Disconnect (QD) | Beverage Out | Barbed | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA

  2 reviews

  The highest quality plastic pin lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs 1/4" barb for 1/4" or 3/16" ID draft line CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Black plastic clearly identifies the disconnect as the liquid out QD This is a high quality pin lock fitting made by CM Becker in Germany. Pin lock plastic quick disconnects for Cornelius style homebrew kegs. These quick connect fittings will connect to the beverage out body connect on your pin lock kegs. Barbed fittings for are the most popular style, they make it simple to connect keg tubing directly to the barb. Threaded flare fittings are also available.  

  Read more less

  $7.99

• 

  AEB Ball Lock Keg | Corny Keg | 5 gal.

  58 reviews

  New Kegs are trouble-free for years Rubber top and bottoms protect floors from dings Perfect laser welds ensure easy sanitation and reduced risk of contamination Made in Italy by AEB, a long-time manufacturer with impeccable attention to detail Ditch the bottles and start kegging today! Save time, reduce the risk of infection and get all those bottles out of the kitchen for good! This brand new 5 gallon keg offers convenience, security and insurance when compared to used or reconditioned kegs. There's no need to replace gaskets or other parts, no need to trust that someone else did a good job with reconditioning, and no possibility of residual flavor or aromas getting into your beer! We import these 5 gallon Cornelius Kegs from AEB Italy, a long-time manufacturer with impeccable attention to detail. Perfect laser welds ensure easy sanitation and reduced risk of contamination. While newer kegs shipped from China may have modern features, they do not provide perfect laser welds and therefore risk contamination over time. You'll be glad you paid a bit extra for this high-quality keg. Tack on our famous Fast & Free shipping and you've got a great quality keg at an amazing value! Ball Lock Style Corny Keg 5 gallon capacity 9" Diam. x 25" Height Maximum working pressure of 130 PSI.  

  Read more less

  $199.99

• 

  MB® Manual Keg Filler | 4 Station | 1.5" T.C. Connections | Welded Stainless Steel Folding Stand | Optional Keg Filling FOBs

  Make quick work of transferring finished beer from fermenter to kegs with the easy-to-operate four station manual keg filler Optional Keg Filling FOBs stop flow automatically once the keg is full, eliminating waste and making it even easier for a single person to operate the filler Sight glass at the inlet allows you to monitor beer flow from the fermenter—check if you're pulling yeast or breaking CO2 out of solution Elevated sample port for purging air from the system before filling runs Made from high-quality Stainless Steel tri-clamp fittings, custom-welded stand, and reinforced silicone tubing Shorten the time it takes to do your least favorite task with the MB Keg Filler. Our Keg Filler was designed by renowned brewmaster Colin Kaminski to make filling kegs a simple process that can be completed quickly. Connect your tank to the keg filler via the 1.5" butterfly valve inlet, which will enable you to shut off flow if you run into any issues. Monitor flow with the sight glass to see if you're pulling yeast, if there's air present in the system, or if CO2 is breaking out of solution because you're filling too quickly. The highest point in the filler is a plunger-style sample valve sitting at the opposite end, allowing you purge air out of the system and minimize oxidation. The high-quality stainless steel keg couplers have had the check valves removed so beer and CO2 can flow backwards when needed. Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution. Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg—foam in the tubing indicates you're filling too quickly, while beer in the tubing indicates the keg is full. The Manual Keg Filler is available with or without a Keg Filler FOB on each filling line. See the instructions below for operating the keg filling FOBs. 4-Head Keg Filling Station Stainless Steel D-style sanke couplers Reinforced silicone tubing on beer side Clear vinyl tubing on gas side Custom-welded compact stainless steel stand

  Read more less

  $1,869.99 - $2,309.99

• 

  Replacement PCO38 Tapping Head

  Replacement PCO38 tapping head. This is the tapping head only. For the full tapping head assembly see KG520. Comes with PCO38 female threads for attaching to the Oxebar Mono Keg and three PCCO1881 male threaded ports for attaching ball lock caps and PRV. KegLand Part Number: KL20169

  Read more less

  $7.69

• 

  KegLand Ball Lock Quick Disconnect (QD) | Replacement Seal

  Replacement seal for barbed or flareed stainless ball lock quick disconnects from KegLand. Compatible with KEG732, KEG734, KEG745, & KEG746.  

  Read more less

  $1.09

• 

  Torpedo Keg Ball Lock Quick Disconnect (QD) | Gas In | Stainless Steel | 1/4" MPT

  1 review

  Heavy-duty ball lock quick disconnect made from 304 stainless steel for lifetime longevity Etched "In" label to clearly identify the QD for gas use Pairs perfectly with stainless steel Torpedo Kegs and compatible with all ball lock corny kegs 1/4" male pipe thread connection For far too long ball lock disconnect fittings have come in only two options -- barb or flare. Torpedo Keg said nuts to that! Then they put down the jar of Planters, pulled out the drawing board and designed this disconnect with 1/4" MPT threads. Made from all stainless steel, we used this fitting to make our Ball Lock Spunding Valve. We're not sure what else it will be used for, but we know our customers, and we're excited to see what you crafty folks come up with! Features: 304 SS Construction - Built to last a lifetime 1/4" MPT Clearly Labeled Ball Lock Gas In 2" Height

  Read more less

  $24.99

• 

  KegLand Ball Lock Quick Disconnect (QD) | Beverage Out | Stainless Steel | Flared

  11 reviews

  304 cast stainless steel ball lock quick disconnect made for high-durability Black ring above the outer bushing to identify the QD for beverage use Compatible with all ball lock style homebrew kegs 1/4" flare thread connection This is a ball-lock type quick disconnect that is constructed from stainless steel for lifetime longevity. This product is for the Black Beverage Out connection on the right, for the White Gas In connection, see our KEG734. 2 1/8" H Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless. Kegland Part Number: KL03018

  Read more less

  $18.99

• 

  Torpedo Keg Dip Tube | Gas In | Corny Keg Part

  Replacement Gas In dip tube for Torpedo Kegs. Stainless steel construction, approximately 1" in length.

  Read more less

  $3.99

• Low stock!

  Beer Tubing Assembly - Pin Lock Quick Disconnect (QD)

  2 reviews

  Includes Pin lock beverage out quick disconnect, line, hand held faucet and two hose clamps. 5 ft of 3/16" line.

  Read more less

  $16.99

• 

  KOMOS® Homebrew Kegging Kit | Ball Lock Keg | Corny Keg | Premium Dual Gauge Regulator | Easy Push Connect Fittings

  Due to high demand, the 2.5 gal is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   Everything you need to start enjoying your delicious beer on draft! No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator Featuring a brand-new ball lock corny keg with rubber booted bottom and top handles EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap! From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 2.5 or 5 gallon Ball Lock Corny Keg. These brand-new kegs are made in the style of the iconic Cornelius homebrew keg with rubber base and molded rubber handles at the top. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup. Included: KOMOS Dual Gauge Regulator KOMOS 5 lb aluminum CO2 cylinder Ball Lock Corny Keg (2.5 or 5 gal) EVABarrier beer & gas lines Duotight Ball Lock Quick Disconnects (QDs) Duotight-compatible plastic picnic faucet KOMOS 7-in-1 Multi Tool Wrench Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.

  Read more less

  $309.99 - $319.99

• 

  KegLand Core 360 Mini CO2 Regulator | Replacement 16 g Cartridge Adapter

  3/8-24 UNF x TR21-4 adapter ring for the KegLand Core 360 Mini CO2 Regulator. Suitable for 16 g CO2 cartridges. This is a replacement standard ring that is included with the regulator.

  Read more less

  $5.49

• 

  Replacement Seal Kit | For Duotight Flow Control Ball Lock Quick Disconnect (QD)

  Replacement seals and poppet for the Duotight Flow Control Ball Lock QD. KegLand Part Number: KL27212

  Read more less

  $4.39

• 

  Replacement Duotight Barb for KegLand Core 360 Mini CO2 Regulator

  1 review

  Replacement Duotight Barb for KegLand Core 360 Mini CO2 Regulator. KegLand Part Number: KL22835

  Read more less

  $5.49

• 

  Straight Dip Tube | Beverage Out | Firestone and Cornelius | Corny Keg Part

  2 reviews

  For Firestone and Cornelius kegs with straight beverage out dip tube. Stainless Steel. Approximate length is 23".

  Read more less

  $22.99

• 

  KOMOS® Homebrew Kegging Kit | Ball Lock Keg | Torpedo Keg | Premium Dual Gauge Regulator | Easy Push Connect Fittings

  Everything you need to start enjoying your delicious beer on draft! No longer will you need to clean, sanitize, fill, and cap 50+ beer bottles Includes brand new KOMOS CO2 Cylinder and robust KOMOS Dual Gauge CO2 Regulator Featuring the hottest homebrew keg around—the all-stainless, stackable Torpedo Keg EVABarrier beer & gas line with Duotight Quick Disconnects and adapter fittings The KOMOS Homebrew Kegging Kit has everything you need to start enjoying your delicious creations on draft. Whether you've brewed one batch or one hundred batches, you're already familiar with the laborious process of bottling your beer. Cleaning, sanitizing, filling and capping 50+ 12 oz bottles can take a lot of time and effort. The very first thing you'll appreciate when switching to kegging is that there's only one vessel you need to worry about. But it's still no comparison to the pleasure of pouring a glass of beer straight from the tap! From tank to tap, this kegging kit is made from the highest-quality components, starting with a brand new KOMOS 5 lb CO2 tank and KOMOS Dual Gauge Regulator. Choose from 1.5, 2.5, or 5 gallon Torpedo Keg. These are the hottest homebrew kegs on the market, featuring stackable base, rolled stainless handles, and labeled In and Out body connects for your QDs. Everything it connected with EVABarrier draft tubing and Duotight push-to-connect fittings. EVABarrier is our draft line of choice due to the double-walled design that protects your beer from oxygen ingress and CO2 loss. Duotight fittings make everything come together quickly and easily—and they're just as easy to disconnect if you need to clean or reconfigure your setup. Included: KOMOS Dual Gauge Regulator KOMOS 5 lb aluminum CO2 cylinder Standard Ball Lock Torpedo Keg (1.5, 2.5, or 5 gal) EVABarrier beer & gas lines Duotight Ball Lock Quick Disconnects (QDs) Duotight-compatible plastic picnic faucet KOMOS 7-in-1 Multi Tool Wrench Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.

  Read more less

  $299.99 - $329.99

• 

  RTorpedo Keg | Dip Tube | Beverage Out | 15 gallon | Corny Keg Part

  Replacement Beverage Dip Tube for the standard 15 Gal Torpedo Keg.

  Read more less

  $14.99

Show more products