This is a proprietary draft shank only intended for use with CM Becker X1 and V10 flow control faucets. It will not work with generic or other brands of faucets.
The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
The V10 stainless steel flow control faucet is designed and produced in Germany with some assembly completed in the United States. This faucet contains technology such as the "Closed Piston Chamber with Encapsulated Compression Spring" that allows for a perfect forward seal on the faucet, no beer trapped in dead space to cause the lever to stick, and the ability to push the faucet backwards for an extra creamy head. The compensator itself has an extra long cone for a wider range of compensation and designed to eliminate uncontrolled shifting of the compensator cone. This configuration features a black standard faucet knob, a polished stainless steel faucet lever, and a lever flow control adjustment system. Please note: The CM Becker X1 and V10 flow control faucets require a proprietary draft shank and will not work with a standard draft shank. Please select on of the draft shanks below to add to your order. 2.5" Chrome Exterior w/ Food Grade Liner (D12907) 2.5" Stainless Steel (D12908) 5-3/8" Stainless Steel (D12909) Features: Full length European Flow Control (completely control restriction at the faucet;no restriction line needed) Made in Germany and assembled in the USA! Features a built in “Creamer” function so you can put a fine cream head on your beer Used in restaurants and bars locally and abroad The faucet handle and draft shank in the example photo are not included.
A deluxe quality drip tray gives your setup a professional look and makes cleanup a snap!
The Deluxe Stainless Counter-Top Drip Tray has a louvered splash grate and can be easily cleaned in the dishwasher or sink. The 8" width easily accommodates a double faucet tower. Rubber feet hold the tray securely and protect your counter from scratches.
Deluxe features include a brushed finish 304 stainless steel, which is more expensive and difficult to work with - but looks beautiful. We carefully TIG weld the corners instead of sealing with a bead of silicone, or over-welding and then grinding which destroys the finish.
Designed by MoreBeer! & Made in the USA.
8 1/4" Wide x 5 3/8" Deep x 3/4" Tall
G-Type keg coupler for Anchor Steam and some other European kegs
Pull-to-engage ergo lever handle
Includes 3/8" OD barb for gas inlet
Bass G style keg tap, also known as, keg coupler, coupling, or adapter. Fits Anchor Brewing kegs.
Will also fit:
Abbot Ale
Anchor Liberty Ale
Anchor Porter
Anchor Steam
Bass Pale Ale
Blackthorne Cider
Caffrey's
Fuller's ESB
Fuller's London Pride
Grolsch
Old Speckeled Hen
Rouge
Scottish Tennents
Sir Perry William's
Watney's
Young's
Young's Chocolate Stout
Young's Oatmeal Stout
Young's Ram Rod Bitter
Young's Special London Ale
You're in college and you would rather spend your money on more beer than a fancier tap. We get it. The Pony Pump is a compact air pump that fits any American sanke style keg. It is lightweight, has a pressure relief vent, 2' length hose and a plastic faucet.
Also known as a keg coupler, coupling, or adapter.
Get your KOMOS Jockey Box hooked up and ready to flow with our preconfigured connection kits! This connection kit includes everything necessary to hook up two American "D-Style" Sanke kegs to your KOMOS Jockey Box except for the CO2 tank and regulator. Choose the connection kit that matches the number of taps you require and the type of keg being served, add on a regulator or CO2 tank if you do not already own one, and get ready to pour flawless pints!
KOMOS Dual Tap Sanke Keg Connection Kit includes:
3 x 5 ft. lengths of 5/16" CO2 Tubing
2 x American Sankey "D" Couplers
2 x 5 ft. Beverage Jumpers with Stainless Steel Tailpieces
Two-Way Aluminum Air Manifold
Hose Clamps and Rubber Washers
This Kit Does Not Include a CO2 Tank or Regulator, but both can be added from the drop-down menus above or under "You Might Also Need" below.
An adjustable pressure relieve valve with a range from 0 to 30 psi. Made from stainless steel this is non-threaded and designed to be welded in place. For a 1/4" MPT option see D1833L.
Sometimes a single draft tower isn't enough for your dream home bar or kegerator. If you're building out a draft system that will have more than four faucets, we highly recommend the KOMOS Double T Bar Draft Tower. Available in 6-tap and 8-tap models, these towers provide ample room for your faucets and will give your draft setup a much cleaner look than having multiple single-column towers. Perfect for upgrading an existing KOMOS Double-Wide Kegerator with two individual towers or designing your own home bar or kegerator. Mounting hardware, tower collars and gaskets included. The tower does not include faucets, shanks, tap handles, or draft tubing. Assembly To assemble the tower, remove the dust caps on either side and remove the foam insulation. Start with the inner most shank hole on either side and work your way outward. We recommend installing each shank and attaching the draft tubing before moving on to the next shank hole. The top section of the tower is 5" in diameter, so most people should be able to reach inside to install the shanks by hand or with the help of a draft wrench. When all the shanks have been mounted, reinsert the foam insulation. The tower may come with more insulation than needed and may need to be cut thinner before reinserting. We recommend using the Double Offset Shank Wrench to help with assembly. Duotight Compatible Tower Shanks We highly recommend pairing the draft tower with Intertap Tower Shanks with Duotight Compatible Barb. When it comes to assembly, there's nothing easier than Duotight push-to-connect fittings, and the same goes for whenever you might need to disassemble a line for cleaning. Duotight fittings pair perfectly with EVABarrier draft tubing, our preferred beer & gas tubing that offers superior protection from oxidation, CO2 loss, and microbial growth. Tower Dimensions: 29.5" L x 5" D x 16" H. The centers of the columns are approximately 16" apart. Not compatible with the KOMOS Olympus III kegerator.
