CMBecker

The highest quality plastic ball lock quick disconnect available to homebrewers Smooth operation—clicks into place on keg posts and is easily removed Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Gray plastic clearly identifies the disconnect as the gas in QD This white, beverage out quick disconnect comes with a barb for attaching to a gas line, and it's made by CM Becker so you know it is high quality. 1/4" flare connection.   Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.

Read more less

The highest quality plastic ball lock quick disconnect available to homebrewers Smooth operation—clicks into place on keg posts and is easily removed Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Black plastic clearly identifies the disconnect as the liquid out QD This black, beverage out quick disconnect comes with a flare for attaching to a beverage line, and it's made by CM Becker so you know it is high quality. The flare threads measure 1/4 inch. Note: Sometimes ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.  

Read more less

The highest quality plastic ball lock quick disconnect available to homebrewers Smooth operation—clicks into place on keg posts and is easily removed 1/4" barb for 1/4" or 3/16" ID draft line CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Black plastic clearly identifies the disconnect as the liquid out QD This black, beverage out quick disconnect comes with a barb for attaching to a beverage line, and it's made by CM Becker so you know it is high quality. The barb measures 1/4", so 3/16" beverage tubing is recommend for the perfect fit.  Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.

Read more less

The highest quality plastic ball lock quick disconnect available to homebrewers Smooth operation—clicks into place on keg posts and is easily removed 1/4" barb for 1/4" or 3/16" ID draft line CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Gray plastic clearly identifies the disconnect as the gas in QD This is a high quality plastic quick disconnect made by CM Becker for your gas line. Barb is 1/4". 1/4" or 3/16" beverage tubing is recommended for gas line. Note: Sometiems ball lock fittings can be difficult to get fully seated on a Cornelius keg. We recommend using a quick spray of sanitizer solution to act as a lubricant and giving it a few twists while applying the ball lock.

Read more less

1/4" flared inline check valve can be used with any flare threaded ball lock or pin lock quick disconnect Allows gas to flow out, but won't allow backflow of liquid into your gas system Ideal safety measure if you force carbonate your beer using the bev out dip tube Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs (male flare threaded side only) CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Add this inline check valve to any flared gas-in disconnect and protect your draft system! The check valve allows gas to flow out, but won't allow backflow of liquid into your gas system. Many manifolds and regulators already feature check valves, but this disconnect will keep liquid from ever entering your gas lines in the first place. Especially handy if you force carbonate your beer using the bev out dip tube! Why we love it:  Because we've had beer shoot back into our gas line and that sucks. At some point you will have a keg that is pressurized more than the pressure in your gas system. This could be caused by different carbonation levels, a keg sitting at room temperature, etc. So for example if the pressure in your keg is at 20 psi and your regulator is set at 12 psi, when you connect your gas in quick-disconnect liquid shoots from the keg into the gas line. Eliminate that possibility with this ingenious fitting. If you're looking for a ball lock disconnect with a built-in check valve, we highly recommend KEG729. However, the beauty of this inline check valve is that it can be used with any flared disconnect, including pin locks. If you don't want to part with your high-quality stainless steel disconnects, this inline check valve is for you!  

Read more less

The highest quality plastic ball lock quick disconnect available to homebrewers Built-in check valve to prevent liquid from backflowing into your draft system Smooth operation—clicks into place on keg posts and is easily removed Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Gray plastic clearly identifies the disconnect as the gas in QD Sleep a little easier knowing this gas in ball lock with built-in check valve has your back. The internal check valve allows gas to flow out, but won't allow backflow of liquid into your gas system. Many manifolds and regulators already feature check valves, but this disconnect will keep liquid from ever entering your gas lines in the first place. Especially handy if you force carbonate your beer using the bev out dip tube! Why we love it:  Because we've had beer shoot back into our gas line and that sucks. At some point you will have a keg that is pressurized more than the pressure in your gas system. This could be caused by different carbonation levels, a keg sitting at room temperature, etc. So for example if the pressure in your keg is at 20 psi and your regulator is set at 12 psi, when you connect your gas in quick-disconnect liquid shoots from the keg into the gas line. Eliminate that possibility with this ingenious fitting.      Features: Internal Check Valve protects your system from liquid back flow Made in Germany and assembled in the USA by CMB. Extremely high quality for years of service. NSF Approved for Food Grade Service!

Read more less

The highest quality plastic ball lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Black plastic clearly identifies the disconnect as the liquid out QD Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany. Red and black quick disconnects are used for the liquid out tank plug. 1/4" male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

Read more less

The highest quality plastic ball lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs Built-in flare washer—no need for a separate nylon washer that is required with stainless steel QDs CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Gray plastic clearly identifies the disconnect as the gas in QD Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany. Red and grey quick disconnects are used for the gas in tank plug. 1/4" male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

Read more less

Add the perfect amount of restriction to any beer line to reduce foam. Eliminates the need for flow control in the faucet itself. Great for use in Jockey Boxes or anywhere you are serving beverages with varying levels of carbonation.    If you are currently using a long length of tubing to increase restriction you can now shorten your tubing. A shorter line holds less beer. Beer that is stored in the line tends to warm up quicker, adding to foaming issues, and is more likely to stale from bacteria present in the line.    Features: Adjust flow with an included Allen wrench (keeps unauthorized people from adjusting the unit) Eliminate foam from beer or slow down / speed up other beverages Fix systems with issues without having to replace lines or faucets Take the guesswork out of line restriction.  You can use shorter lines and still have perfect restriction.  You can also use larger ID lines and adjust as necessary. Easy to disassemble for cleaning, clear body for easy monitoring Made in Germany by CM Becker from Food grade plastic and stainless steel parts! Comes Equipped with 2 x 3/16" Barbs Easy to install to any existing beer line (cut line and install two clamps)

Read more less

The highest quality plastic pin lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs 1/4" barb for 1/4" or 3/16" ID draft line CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Black plastic clearly identifies the disconnect as the liquid out QD This is a high quality pin lock fitting made by CM Becker in Germany. Pin lock plastic quick disconnects for Cornelius style homebrew kegs. These quick connect fittings will connect to the beverage out body connect on your pin lock kegs. Barbed fittings for are the most popular style, they make it simple to connect keg tubing directly to the barb. Threaded flare fittings are also available.  

Read more less

The highest quality plastic ball lock quick disconnect available to homebrewers Twist-to-connect style pin lock QD for pin lock style corny kegs 1/4" barb for 1/4" or 3/16" ID draft line CMBecker is an international manufacturer of beverage dispensing solutions for both home and professional draft equipment Gray plastic clearly identifies the disconnect as the gas in QD This is a high quality fitting made by CM Becker in Germany. Pin Lock Gas-In quick-disconnect is fitted with a barbed end for easy attachment of your gas line. Gray top and base denote that this unit is used on gas side. 2 pin. 1/4'' barb fitting for easy attachment of gas line.  

Read more less

Will fit most Cornelius kegs. This particular unit is made by CM Becker of Germany and is known for being of good quality. 

Read more less

This is a proprietary draft shank only intended for use with CM Becker X1 and V10 flow control faucets. It will not work with generic or other brands of faucets.

Read more less

The CMBecker Inline Flow Control 4mm Barb is necessary for those looking to use tubing that has an inner diameter of 3/16" Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 4mm. When using with 3/16" hose you may need to slightly heat hose (using hot water) to stretch hose over barb (this is how we do it!) Just make sure you clamp it properly to get a good seal This will not work with a standard shank, it works with CMBecker shanks. These seal at two places and do not have a flat end (see photo)

Read more less

This is a proprietary draft shank only intended for use with CM Becker X1 and V10 flow control faucets. It will not work with generic or other brands of faucets.

Read more less

The CMBecker Inline Flow Control 7mm Barb is necessary for those looking to use tubing that has an inner diameter of 5/16 or 3/8" Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 7mm which is slightly wider than 1/4" at 0.27" This will not work with a standard shank, it works with CMBecker shanks.

Read more less

The CMBecker International Inline Flow Control 10mm Barb is necessary for those looking to use tubing that has an inner diameter of 3/8". It is slightly smaller than 1/2", but it will fit a 1/2" ID Hose if properly clamped. Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 10mm which is between 1/2" and 3/8". When using with 3/8" hose you may need to slightly heat hose (using hot water) to stretch hose over barb (this is how we do it!) When using with 1/2" it will be loose, but we have used it with syphon hose and thicker high heat (EJ beverage or silicone) hose. Just make sure you clamp it properly to get a good seal. This will not work with a standard shank, it works with CMBecker shanks

Read more less

This is a proprietary draft shank only intended for use with CM Becker X1 and V10 flow control faucets. It will not work with generic or other brands of faucets.

Read more less