Carboy Accessories

Use the Fermonster Carboy Carrier to move your Fermonster, Plastic or Glass Carboy around with ease. The harness and strap handles are made from heavy-duty polypropylene, enabling you to haul up to 100 lbs of your wort or finished beer without the risk of losing your grip. Cradle your carboy with confidence and avoid spilling! The carrier comes with handles in two different positions for added convenience. Short handles for lifting and long handles for moving. The long handles are especially handy when lifting your carboy out of a top-loading fermentation locker. Compatibility: 3, 5 and 6 gallon Plastic Carboys 3, 5 and 6 gallon Glass Carboys 3, 6 and 7 gallon Fermonsters Take Care of the Carrier: Avoid prolonged exposure to sunlight Machine wash safe (low temperatures only) Do not clean with bleach or products that contain bleach Hang dry in the shade Do not iron  

Read more less

Make moving your carboy safer and easier with these Orange Smooth-Neck Carboy Handles!   For one handed lifting of empty Smooth Necked (not threads) glass carboys. Fits 3, 5, 6, 6.5 gallon smooth neck carboys.

Read more less

The blades fold down allowing for easy insertion into a barrel or even a glass carboy. Ideal for mixing, stirring wine and works great as a degasser. As soon as you turn your drill on the blades expand to create a powerful stirring action. We do not recommend using in a carboy that is topped full because the stirrer displaces too much liquid and also creates a vortex that will send wine out the top. In these cases a hollow racking cane works exceptionally well. Works with 3/8" or larger drills. Stirrer is around 2' long.

Read more less

Have you been struggling with fermentation temperature swings? The BrewBuilt Neoprene Carboy Sleeve works great for maintaining the internal temperature of your 5, 6, or 6.5 gallon glass carboy. If you aren't fermenting in a temperature-controlled environment your beer is likely rising and falling with the ambient temperature, and these swings can stress out yeast and have a negative effect on the finished product. This 6 mm thick neoprene sleeve will help retain the heat naturally produced by fermentation activity and provide some protection from the ambient environment, leading to more consistent fermentation temps, happier yeast, and less off flavors in your beer. We highly recommend the neoprene sleeve for use with the BrewBuilt Carboy CoolStix. The added insulation will lower the amount of cycles needed to maintain fermentation temperatures and is a must-have for cold crashing.   SKU Size Height (in.) Diameter (in.) FE329A 5 Gal 14.75 10.75 FE329B 6 Gal 17.25 10.90 FE329C 6.5 Gal 17.50 11.20  

Read more less

This clever drainer takes the hard work out of draining & drying out your carboy!    The Blue Carboy Drainer is a great way to drain your carboys without having to hold them upside down the entire time. It holds the carboy for you, in an inverted position, while the liquid drains. As a bonus, as long as your sanitized carboy is held upside down, it will remain sanitary and ready to fill. The mouth of the carboy is close to the ground resulting in a bit longer drying time than with other drainers, if you are using it for drying.    Please note that carboys fitted with neck handles will not fit in this drainer.

Read more less

This plastic spigot has an adjustable spout which can be rotated 360 degrees and has a thread to fit into your plastic fermenter. It also has a bulkhead so you can use one of these in any type of vessel with a 26 mm hole that you would like to add a spigot to. Great for turning a bucket into a bottling bucket! Comes with spigot, 2 washers and a lock nut. KegLand Part Number: KL01632  

Read more less

The ported plastic carboys are pretty cool in that you can eliminate having to rack out of them.  However, you need this tool to attach the nut onto a plastic ported carboy from the inside.   The wrench has a specially molded hex nut to hold the 5/16 inch barbed (FE347) or 1/2 inch barbed (FE347A) spigot nut, and a long handle so you can reach to the bottom of the carboy. The spigot wrench can be reused, you only need it during the installation and/or removal of the spigots.

Read more less

The MiniMesh is perfect for adding dry hops to your beer! Keep your dry hopping on a precise schedule by adding them to this mesh sleeve inside the PET Carboy, then easily pull them out after the desired contact time. This mesh sleeve is custom made for the Vintage Shop PET Carboy. The plastic ring sits inside the neck of the fermenter with room for a #10 stopper to be inserted for an airtight seal. The ring actually holds onto the neck of the carboy so there's no risk of the mesh sleeve falling into the carboy. Made from food grade materials, the #50 mesh will not affect the flavor of the beer or wine, and is temperature rated to 122°F. Designed for multiple uses, the MiniMesh can be cleaned in the dishwasher and sanitized with the sanitizer of your choice. For FerMonster users, the MiniMesh and MonsterMesh can be used simultaneously. The MonsterMesh will sit on the neck of the carboy, and the MiniMesh can be inserted through the stopper hole in the lid. This way you can have two different infusions starting or stopping at different times.  

Read more less

You love your Carboy Cleaner so much that you’ve worn out the cleaning pads!   A set of replacement pads and washers for The Carboy Cleaner™. The ease and convenience of the Carboy Cleaner can’t be overstated. After you’ve used it to clean enough carboys and kegs, you will need to replace the cleaning pads.   Set of 2 replacement pads and 4 washers for The Carboy Cleaner™.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid December. Use this specially made carboy bag to protect yourself and your beer! Carboys can be slippery, especially when wet. Our strong canvas bag allows you to more safely carry a carboy. If it is accidentally dropped the canvas will help contain the broken glass and reduce personal injury. Your beer also benefits as it is protected from light. UV Light interacts with compounds in hops to create skunky off flavor (editor note... I may not be a smart man but I do know skunky flavors in beer aren't good). These are made in the USA from heavy black canvas with strong nylon webbing that is stitched (very strong) to support the carboy when lifting. In the summer, you can help reduce high fermentation temps by placing frozen ice packs in between the canvas and the carboy.

Read more less

A new carboy handle in distinctive blue color that fits our threaded neck 6.5 gal carboys.

Read more less

Made from HDPE this handy little bulkhead tap has a 3/8" OD barbed end. Got an old plastic bucket lying around? Drill a 24 mm hole, add one of these handy little numbers and hey presto! Instant fermenter! Super easy to install and with a much more positive action that a typical little HDPE fermenter tap. KegLand Part Number: KL20343

Read more less

Place underneath a carboy to tilt it and siphon every last drop sediment free. Keeps your hands free while you operate the siphon. Be careful when using this product as the carboy can easily be tipped over. Using two can make a more stable setup.

Read more less

Use this specially made carboy bag to protect yourself and your beer! Carboys can be slippery, especially when wet. Our strong canvas bag allows you to more safely carry a carboy. If it is accidentally dropped the canvas will help contain the broken glass and reduce personal injury. Your beer also benefits as it is protected from light. UV Light interacts with compounds in hops to create skunky off flavor (editor note... I may not be a smart man but I do know skunky flavors in beer aren't good). These are made in the USA from heavy black canvas with strong nylon webbing that is stitched (very strong) to support the carboy when lifting. In the summer, you can help reduce high fermentation temps by placing frozen ice packs in between the canvas and the carboy.

Read more less

Natural rubber hood for jubs and carboys. Features 3/8 inch hole for airlocks.

Read more less